-
Proof-of-concept Study of Sparse Processing Particle Image Velocimetry for Real Time Flow Observation
Authors:
Naoki Kanda,
Chihaya Abe,
Shintaro Goto,
Keigo Yamada,
Kumi Nakai,
Yuji Saito,
Keisuke Asai,
Taku Nonomura
Abstract:
In this paper, we overview, evaluate, and demonstrate the sparse processing particle image velocimetry (SPPIV) as a real-time flow field estimation method using the particle image velocimetry (PIV), whereas SPPIV was previously proposed with its feasibility study and its real-time demonstration is conducted for the first time in this study. In the wind tunnel test, the PIV measurement and real-tim…
▽ More
In this paper, we overview, evaluate, and demonstrate the sparse processing particle image velocimetry (SPPIV) as a real-time flow field estimation method using the particle image velocimetry (PIV), whereas SPPIV was previously proposed with its feasibility study and its real-time demonstration is conducted for the first time in this study. In the wind tunnel test, the PIV measurement and real-time measurement using SPPIV were conducted for the flow velocity field around the NACA0015 airfoil model. The off-line analysis results of the test show that the flow velocity field can be estimated from a small number of processing points by applying SPPIV, and also illustrates the following characteristics of SPPIV. The estimation accuracy improves as the number of processing points increases, whereas the processing time per step increases in proportion to the number of processing points. Therefore, it is necessary to set an optimal number of processing points. In addition, the application of the Kalman filter significantly improves the estimation accuracy with a small number of processing points while suppressing the processing time. When the flow velocity fields with different angles of attack are used as the training data with that of test data, the estimation using SPPIV is found to be reasonable if the difference in angle of attack between the training and test data is equal to or less than 2 deg and the flow phenomena of the training data are similar to that of the test data. For this reason, training data should be prepared at least every 4 deg. Finally, the demonstration of SPPIV as a real-time flow observation was conducted for the first time. In this demonstration, the real-time measurement is found to be possible at a sampling rate of 2000 Hz at 20 or less processing points in the top 10 modes estimation as expected by the off-line analyses.
△ Less
Submitted 29 August, 2022; v1 submitted 14 July, 2022;
originally announced July 2022.
-
Optimization of Sparse Sensor Placement for Estimation of Wind Direction and Surface Pressure Distribution Using Time-Averaged Pressure-Sensitive Paint Data on Automobile Model
Authors:
Ryoma Inoba,
Kazuki Uchida,
Yuto Iwasaki,
Takayuki Nagata,
Yuta Ozawa,
Yuji Saito,
Taku Nonomura,
Keisuke Asai
Abstract:
This study proposes a method for predicting the wind direction against the simple automobile model (Ahmed model) and the surface pressure distributions on it by using data-driven optimized sparse pressure sensors. Positions of sparse pressure sensor pairs on the Ahmed model were selected for estimation of the yaw angle and reconstruction of pressure distributions based on the time-averaged surface…
▽ More
This study proposes a method for predicting the wind direction against the simple automobile model (Ahmed model) and the surface pressure distributions on it by using data-driven optimized sparse pressure sensors. Positions of sparse pressure sensor pairs on the Ahmed model were selected for estimation of the yaw angle and reconstruction of pressure distributions based on the time-averaged surface pressure distributions database of various yaw angles, whereas the symmetric sensors in the left and right sides of the model were assumed. The surface pressure distributions were obtained by pressure-sensitive paint measurements. Three algorithms for sparse sensor selection based on the greedy algorithm were applied, and the sensor positions were optimized. The sensor positions and estimation accuracy of yaw angle and pressure distributions of three algorithms were compared and evaluated. The results show that a few optimized sensors can accurately predict the yaw angle and the pressure distributions.
△ Less
Submitted 16 May, 2022;
originally announced May 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
The Forward Physics Facility at the High-Luminosity LHC
Authors:
Jonathan L. Feng,
Felix Kling,
Mary Hall Reno,
Juan Rojo,
Dennis Soldin,
Luis A. Anchordoqui,
Jamie Boyd,
Ahmed Ismail,
Lucian Harland-Lang,
Kevin J. Kelly,
Vishvas Pandey,
Sebastian Trojanowski,
Yu-Dai Tsai,
Jean-Marco Alameddine,
Takeshi Araki,
Akitaka Ariga,
Tomoko Ariga,
Kento Asai,
Alessandro Bacchetta,
Kincso Balazs,
Alan J. Barr,
Michele Battistin,
Jianming Bian,
Caterina Bertone,
Weidong Bai
, et al. (211 additional authors not shown)
Abstract:
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod…
▽ More
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Effect of Oxygen Mole Fraction on Static Properties of Pressure-Sensitive Paint
Authors:
Tomohiro Okudera,
Takayuki Nagata,
Miku Kasai,
Yuji Saito,
Taku Nonomura,
Keisuke Asai
Abstract:
The effects of oxygen mole fraction on the static properties of pressure-sensitive paint (PSP) were investigated. Sample coupon tests using a calibration chamber were conducted for polymer-based PSP (PHFIPM-PSP), polymer/ceramic PSP (PC-PSP), and anodized-aluminium PSP (AA-PSP). The oxygen mole fraction was set to be between 0.1-100% and the ambient pressure was set to be between 0.5-140 kPa. The…
▽ More
The effects of oxygen mole fraction on the static properties of pressure-sensitive paint (PSP) were investigated. Sample coupon tests using a calibration chamber were conducted for polymer-based PSP (PHFIPM-PSP), polymer/ceramic PSP (PC-PSP), and anodized-aluminium PSP (AA-PSP). The oxygen mole fraction was set to be between 0.1-100% and the ambient pressure was set to be between 0.5-140 kPa. The localized Stern-Volmer coefficient $B_{\rm local}$ once increases and then decreases as the oxygen mole fraction increases. The value of $B_{\rm local}$ depends on both ambient pressure and oxygen mole fraction, but the effect of this parameter can be characterized as a function of the partial pressure of oxygen. The value of $B_{\rm local}$ of AA-PSP and PHFIPM-PSP, which are low-pressure type and relatively low-pressure type PSP, have a peak at the relatively low partial pressure of oxygen, and $B_{\rm local}$ of PC-PSP, which are atmospheric pressure type PSP, has a peak at the relatively high partial pressure of oxygen. The peak of the intensity change with respect to pressure fluctuation proportional to the ambient pressure $S_{\mathcal{PR}}$ appears at the lower partial pressure of oxygen than that of $B_{\rm local}$. This is because the intensity of PSP becomes quite low at the high partial pressure of oxygen even if $B_{\rm local}$ is higher. Hence, an optimal partial oxygen mole fraction exists depending on the type of PSP and ambient pressure range of the experiment, and its optimal value can be found based on the partial pressure of oxygen.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Quantitative Evaluation of a Linear Reduced-order Model based on Particle-image-velocimetry Data of Separated Flow Field around Airfoil
Authors:
Taku Nonomura,
Koki Nankai,
Yuto Iwasaki,
Atsushi Komuro,
Keisuke Asai
Abstract:
A quantitative evaluation method for a reduced-order model of the flow field around an NACA0015 airfoil based on particle image velocimetry (PIV) data is proposed in the present paper. The velocity field data obtained by the time-resolved PIV measurement were decomposed into significant modes by a proper orthogonal decomposition (POD) technique, and a linear reduced-order model was then constructe…
▽ More
A quantitative evaluation method for a reduced-order model of the flow field around an NACA0015 airfoil based on particle image velocimetry (PIV) data is proposed in the present paper. The velocity field data obtained by the time-resolved PIV measurement were decomposed into significant modes by a proper orthogonal decomposition (POD) technique, and a linear reduced-order model was then constructed by the linear regression of the time advancement of the POD modes or the sparsity promoting dynamic mode decomposition (DMD). The present evaluation method can be used for the evaluation of the estimation error and the model predictability. The model was constructed using different numbers of POD or DMD modes for order reduction of the fluid data and different methods of estimating the linear coefficients, and the effects of these conditions on the model performance were quantitatively evaluated. The results illustrates that forward (standard) model works the best with two to ten significant DMD modes selected by sparsity promoting DMD.
△ Less
Submitted 6 April, 2021; v1 submitted 29 July, 2019;
originally announced July 2019.
-
Data-driven Vector-measurement-sensor Selection based on Greedy Algorithm
Authors:
Yuji Saito,
Taku Nonomura,
Koki Nankai,
Keigo Yamada,
Keisuke Asai,
Yasuo Sasaki,
Daisuke Tsubakino
Abstract:
A vector-measurement-sensor problem for the least squares estimation is considered, by extending a previous novel approach in this paper. An extension of the vector-measurement-sensor selection of the greedy algorithm is proposed and is applied to particle-image-velocimetry data to reconstruct the full state based on the information given by sparse vector-measurement sensors.
A vector-measurement-sensor problem for the least squares estimation is considered, by extending a previous novel approach in this paper. An extension of the vector-measurement-sensor selection of the greedy algorithm is proposed and is applied to particle-image-velocimetry data to reconstruct the full state based on the information given by sparse vector-measurement sensors.
△ Less
Submitted 29 June, 2020; v1 submitted 30 May, 2019;
originally announced June 2019.
-
Airfoil wake modification with Gurney flap at Low-Reynolds number
Authors:
Muralikrishnan Gopalakrishnan Meena,
Kunihiko Taira,
Keisuke Asai
Abstract:
The complex wake modifications produced by a Gurney flap on symmetric NACA airfoils at low Reynolds number are investigated. Two-dimensional incompressible flows over NACA 0000 (flat plate), 0006, 0012 and 0018 airfoils at a Reynolds number of $Re = 1000$ are analyzed numerically to examine the flow modifications generated by the flaps for achieving lift enhancement. While high lift can be attaine…
▽ More
The complex wake modifications produced by a Gurney flap on symmetric NACA airfoils at low Reynolds number are investigated. Two-dimensional incompressible flows over NACA 0000 (flat plate), 0006, 0012 and 0018 airfoils at a Reynolds number of $Re = 1000$ are analyzed numerically to examine the flow modifications generated by the flaps for achieving lift enhancement. While high lift can be attained by the Gurney flap on airfoils at high angles of attack, highly unsteady nature of the aerodynamic forces are also observed. Analysis of the wake structures along with the lift spectra reveals four characteristic wake modes (steady, 2S, P and 2P), influencing the aerodynamic performance. The effects of the flap over wide range of angles of attack and flap heights are considered to identify the occurrence of these wake modes, and are encapsulated in a wake classification diagram. Companion three-dimensional simulations are also performed to examine the influence of three-dimensionality on the wake regimes. The spanwise instabilities that appear for higher angles of attack are found to suppress the emergence of the 2P mode. The use of the wake classification diagram as a guidance for Gurney flap selection at different operating conditions to achieve the required aerodynamic performance is discussed.
△ Less
Submitted 25 October, 2017; v1 submitted 28 August, 2017;
originally announced August 2017.