-
The Oxygen Reduction Pathway for Spinel Metal Oxides in Alkaline Media: An Experimentally Supported Ab Initio Study
Authors:
Colin R. Bundschu,
Mahdi Ahmadi,
Juan F. Méndez-Valderrama,
Yao Yang,
Héctor D. Abruña,
Tomás A. Arias
Abstract:
Precious-metal-free spinel oxide electrocatalysts are promising candidates for catalyzing the oxygen reduction reaction (ORR) in alkaline fuel cells. In this theory-driven study, we use joint density-functional theory in tandem with supporting electrochemical measurements to identify a novel theoretical pathway for the ORR on cubic Co3O4 nanoparticle electrocatalysts. This pathway aligns more clos…
▽ More
Precious-metal-free spinel oxide electrocatalysts are promising candidates for catalyzing the oxygen reduction reaction (ORR) in alkaline fuel cells. In this theory-driven study, we use joint density-functional theory in tandem with supporting electrochemical measurements to identify a novel theoretical pathway for the ORR on cubic Co3O4 nanoparticle electrocatalysts. This pathway aligns more closely with experimental results than previous models. The new pathway employs the cracked adsorbates *(OH)(O) and *(OH)(OH), which, through hydrogen bonding, induce spectator surface *H. This results in an onset potential closely matching experimental values, in stark contrast to the traditional ORR pathway, which keeps adsorbates intact and overestimates the onset potential by 0.7 V. Finally, we introduce electrochemical strain spectroscopy (ESS), a groundbreaking strain analysis technique. ESS combines ab initio calculations with experimental measurements to validate proposed reaction pathways and pinpoint rate-limiting steps.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
Atomically smooth films of CsSb: a chemically robust visible light photocathode
Authors:
C. T. Parzyck,
C. A. Pennington,
W. J. I. DeBenedetti,
J. Balajka,
E. Echeverria,
H. Paik,
L. Moreschini,
B. D. Faeth,
C. Hu,
J. K. Nangoi,
V. Anil,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
A. Galdi,
K. M. Shen,
J. M. Maxson
Abstract:
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and co…
▽ More
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and contamination, must be overcome. By exploring the growth of CsxSb thin films monitored by in situ electron diffraction, the conditions to reproducibly synthesize atomically smooth films of CsSb on 3C-SiC (100) and graphene coated TiO2 (110) substrates are identified, and detailed structural, morphological, and electronic characterization is presented. These films combine high quantum efficiency in the visible (up to 1.2% at 400 nm), an easily accessible photoemission threshold of 550 nm, low surface roughness (down to 600 pm on a 1 um scale), and a robustness against oxidation up to 15 times greater then Cs3Sb. These properties suggest that CsSb has the potential to operate as an alternative to Cs$_3$Sb in electron source applications where the demands of the vacuum environment might otherwise preclude the use of traditional alkali antimonides.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
ZrNb(CO) RF superconducting thin film with high critical temperature in the theoretical limit
Authors:
Zeming Sun,
Thomas Oseroff,
Zhaslan Baraissov,
Darrah K. Dare,
Katrina Howard,
Benjamin Francis,
A**kya C. Hire,
Nathan Sitaraman,
Tomas A. Arias,
Mark K. Transtrum,
Richard Hennig,
Michael O. Thompson,
David A. Muller,
Matthias U. Liepe
Abstract:
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Develo** advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report Zr…
▽ More
Superconducting radio-frequency (SRF) resonators are critical components for particle accelerator applications, such as free-electron lasers, and for emerging technologies in quantum computing. Develo** advanced materials and their deposition processes to produce RF superconductors that yield nanoohms surface resistances is a key metric for the wider adoption of SRF technology. Here we report ZrNb(CO) RF superconducting films with high critical temperatures (Tc) achieved for the first time under ambient pressure. The attainment of a Tc near the theoretical limit for this material without applied pressure is promising for its use in practical applications. A range of Tc, likely arising from Zr do** variation, may allow a tunable superconducting coherence length that lowers the sensitivity to material defects when an ultra-low surface resistance is required. Our ZrNb(CO) films are synthesized using a low-temperature (100 - 200 C) electrochemical recipe combined with thermal annealing. The phase transformation as a function of annealing temperature and time is optimized by the evaporated Zr-Nb diffusion couples. Through phase control, we avoid hexagonal Zr phases that are equilibrium-stable but degrade Tc. X-ray and electron diffraction combined with photoelectron spectroscopy reveal a system containing cubic ZrNb mixed with rocksalt NbC and low-dielectric-loss ZrO2. We demonstrate proof-of-concept RF performance of ZrNb(CO) on an SRF sample test system. BCS resistance trends lower than reference Nb, while quench fields occur at approximately 35 mT. Our results demonstrate the potential of ZrNb(CO) thin films for particle accelerator and other SRF applications.
△ Less
Submitted 12 June, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Extending the Use of Information Theory in Segregation Analyses to Construct Comprehensive Models of Segregation
Authors:
Boris Barron,
Yunus A. Kinkhabwala,
Chriss Hess,
Matthew Hall,
Itai Cohen,
Tomás A. Arias
Abstract:
The traditional approach to the quantitative study of segregation is to employ indices that are selected by ``desirable properties''. Here, we detail how information theory underpins entropy-based indices and demonstrate how desirable properties can be used to systematically construct models of segregation. The resulting models capture all indices which satisfy the selected properties and provide…
▽ More
The traditional approach to the quantitative study of segregation is to employ indices that are selected by ``desirable properties''. Here, we detail how information theory underpins entropy-based indices and demonstrate how desirable properties can be used to systematically construct models of segregation. The resulting models capture all indices which satisfy the selected properties and provide new insights, such as how the entropy index presumes a particular form of intergroup interactions and how the dissimilarity index depends on the regional composition. Additionally, our approach reveals that functions, rather than indices, tend to be necessary mathematical tools for a comprehensive quantification of segregation. We then proceed with exploratory considerations of two-group residential segregation, finding striking similarities in major U.S. cities, subtle segregation patterns that correlate with minority group diversity, and substantive reductions in segregation that may be overlooked with traditional approaches. Finally, we explore the promise of our approach for segregation forecasting.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
A single-crystal alkali antimonide photocathode: high efficiency in the ultra-thin limit
Authors:
C. T. Parzyck,
A. Galdi,
J. K. Nangoi,
W. J. I. DeBenedetti,
J. Balajka,
B. D. Faeth,
H. Paik,
C. Hu,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
K. M. Shen,
J. M. Maxson
Abstract:
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films…
▽ More
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Forecasting racial dynamics at the neighborhood scale using Density-functional Fluctuation Theory
Authors:
Yunus A. Kinkhabwala,
Boris Barron,
Matthew Hall,
Tomas A. Arias,
Itai Cohen
Abstract:
Racial residential segregation is a defining and enduring feature of U.S. society, sha** inter-group relations, racial disparities in income and health, and access to high-quality public goods and services. The design of policies aimed at addressing these inequities would be better informed by descriptive models of segregation that are able to predict neighborhood scale racial sorting dynamics.…
▽ More
Racial residential segregation is a defining and enduring feature of U.S. society, sha** inter-group relations, racial disparities in income and health, and access to high-quality public goods and services. The design of policies aimed at addressing these inequities would be better informed by descriptive models of segregation that are able to predict neighborhood scale racial sorting dynamics. While coarse regional population projections are widely accessible, small area population changes remain challenging to predict because granular data on migration is limited and mobility behaviors are driven by complex social and idiosyncratic dynamics. Consequently, to account for such drivers, it is necessary to develop methods that can extract effective descriptions of their impacts on population dynamics based solely on statistical analysis of available data. Here, we develop and validate a Density-Functional Fluctuation Theory (DFFT) that quantifies segregation using density-dependent functions extracted from population counts and uses these functions to accurately forecast how the racial/ethnic compositions of neighborhoods across the US are likely to change. Importantly, DFFT makes minimal assumptions about the nature of the underlying causes of segregation and is designed to quantify segregation for neighborhoods with different total populations in regions with different compositions. This quantification can be used to accurately forecast both average changes in neighborhood compositions and the likelihood of more drastic changes such as those associated with gentrification and neighborhood tip**. As such, DFFT provides a powerful framework for researchers and policy makers alike to better quantify and forecast neighborhood-scale segregation and its associated dynamics.
△ Less
Submitted 5 August, 2021;
originally announced August 2021.
-
Small-area Population Forecast in a Segregated City using Density-Functional Fluctuation Theory
Authors:
Yuchao Chen,
Yunus A. Kinkhabwala,
Boris Barron,
Matthew Hall,
Tomas A. Arias,
Itai Cohen
Abstract:
Decisions regarding housing, transportation, and resource allocation would all benefit from accurate small-area population forecasts. While various tried-and-tested forecast methods exist at regional scales, develo** an accurate neighborhood-scale forecast remains a challenge partly due to complex drivers of residential choice ranging from housing policies to social preferences and economic stat…
▽ More
Decisions regarding housing, transportation, and resource allocation would all benefit from accurate small-area population forecasts. While various tried-and-tested forecast methods exist at regional scales, develo** an accurate neighborhood-scale forecast remains a challenge partly due to complex drivers of residential choice ranging from housing policies to social preferences and economic status that cumulatively cause drastic neighborhood-scale segregation. Here, we show how to forecast the dynamics of neighborhood-scale demographics by extending a novel statistical physics approach called Density-Functional Fluctuation Theory (DFFT) to multi-component time-dependent systems. In particular, this technique observes the fluctuations in neighborhood-scale demographics to extract effective drivers of segregation. As a demonstration, we simulate a segregated city using a Schelling-type segregation model, and found that DFFT accurately predicts how a city-scale demographic change trickles down to block scales. Should these results extend to actual human populations, DFFT could capitalize on the recent advances in demographic data collection and regional-scale forecasts to improve upon current small-area population forecasts.
△ Less
Submitted 9 March, 2023; v1 submitted 21 August, 2020;
originally announced August 2020.
-
Ab initio many-body photoemission theory of transverse energy distribution of photoelectrons: PbTe(111) as a case study with experimental comparisons
Authors:
J. Kevin Nangoi,
Siddharth Karkare,
Ravishankar Sundararaman,
Howard A. Padmore,
T. A. Arias
Abstract:
This manuscript presents, to our knowledge, the first fully ab initio many-body photoemission framework to predict the transverse momentum distributions and the mean transverse energies (MTEs) of photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the…
▽ More
This manuscript presents, to our knowledge, the first fully ab initio many-body photoemission framework to predict the transverse momentum distributions and the mean transverse energies (MTEs) of photoelectrons from single-crystal photocathodes. The need to develop such a theory stems from the lack of studies that provide complete understanding of the underlying fundamental processes governing the transverse momentum distribution of photoelectrons emitted from single crystals. For example, initial predictions based on density-functional theory calculations of effective electron masses suggested that the (111) surface of PbTe would produce very small MTEs ($\leq$ 15 meV), whereas our experiments yielded MTEs ten to twenty times larger than these predictions, and also exhibited a lower photoemission threshold than predicted. The ab initio framework presented in this manuscript correctly reproduces the magnitude of the MTEs from our measurements in PbTe(111) and also the observed photoemission below the predicted threshold. Our results show that photoexcitations into bulk-like states and coherent, many-body electron-photon-phonon scattering processes, both of which initial predictions ignored, indeed play important roles in photoemission from PbTe(111). Finally, from the lessons learned, we recommend a procedure for rapid computational screening of potential single-crystal photocathodes for applications in next-generation ultrafast electron diffraction and X-ray free-electron lasers, which will enable new, significant advances in condensed matter research.
△ Less
Submitted 25 June, 2020; v1 submitted 21 June, 2020;
originally announced June 2020.
-
$\textit{Ab Initio}$ Theory of the Impact from Grain Boundaries and Substitutional Defects on Superconducting Nb$_3$Sn
Authors:
Michelle M. Kelley,
Nathan S. Sitaraman,
Tomás A. Arias
Abstract:
Grain boundaries play a critical role in applications of superconducting Nb$_3$Sn: in dc applications, grain boundaries preserve the material's inherently high critical current density by pinning flux, while in ac applications grain boundaries can provide weak points for flux entry and lead to significant dissipation. We present the first $\textit{ab initio}$ study to investigate the physics of di…
▽ More
Grain boundaries play a critical role in applications of superconducting Nb$_3$Sn: in dc applications, grain boundaries preserve the material's inherently high critical current density by pinning flux, while in ac applications grain boundaries can provide weak points for flux entry and lead to significant dissipation. We present the first $\textit{ab initio}$ study to investigate the physics of different boundary types in Nb$_3$Sn using density functional theory. We identify an energetically favorable selection of tilt and twist grain boundaries of distinct orientations. We find that clean grain boundaries free of point defects reduce the Fermi-level density of states by a factor of two, an effect that decays back to the bulk electronic structure $\sim1-1.5$ nm from the boundary. We further calculate the binding free-energies of tin substitutional defects to multiple boundaries, finding a strong electronic interaction that extends to a distance comparable to that of the reduction of density of states. Associated with this interaction, we discover a universal trend in defect electronic entropies near a boundary. We probe the effects of defect segregation on grain boundary electronic structure and calculate the impact of substitutional impurities on the Fermi-level density of states in the vicinity of a grain boundary, finding that titanium and tantalum have little impact regardless of placement, whereas tin, copper, and niobium defects each have a significant impact but only on sites away from the boundary core. Finally, we consider how all of these effects impact the local superconducting transition temperature $T_\textrm{c}$ as a function of distance from the boundary plane.
△ Less
Submitted 23 September, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
$\textit{Ab Initio}$ Study of Antisite Defects in Nb$_3$Sn: Phase Diagram and Impact on Superconductivity
Authors:
Nathan S. Sitaraman,
Jared Carlson,
Alden R. Pack,
Ryan D. Porter,
Matthias U. Liepe,
Mark K. Transtrum,
Tomás A. Arias
Abstract:
Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and ho…
▽ More
Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and how they affect the SRF properties of Nb$_3$Sn cavities are not fully understood. Using $\textit{ab initio}$ techniques, we calculate the A15 region of the Nb-Sn phase diagram, discuss a possible modification to the phase diagram near grain boundaries, and calculate $T_c$ as a function of stoichiometry, including experimentally inaccessible tin-rich stoichiometry. We find that the impact of antisite defects on the density of states near the Fermi-level of Nb$_3$Sn plays a key role in determining many of their properties. These results improve our understanding of the obstacles facing Nb$_3$Sn SRF systems, and how modified growth processes might overcome them.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
First Principles Free-Energy Theory of Solvation with Atomic Scale Liquid Structure
Authors:
Kendra Letchworth-Weaver,
Ravishankar Sundararaman,
T. A. Arias
Abstract:
Quantum-chemical processes in liquid environments impact broad areas of science, from molecular biology to geology to electrochemistry. While density-functional theory (DFT) has enabled efficient quantum-mechanical calculations which profoundly impact understanding of atomic-scale phenomena, realistic description of the liquid remains a challenge. Here, we present an approach based on joint densit…
▽ More
Quantum-chemical processes in liquid environments impact broad areas of science, from molecular biology to geology to electrochemistry. While density-functional theory (DFT) has enabled efficient quantum-mechanical calculations which profoundly impact understanding of atomic-scale phenomena, realistic description of the liquid remains a challenge. Here, we present an approach based on joint density-functional theory (JDFT) which addresses this challenge by leveraging the DFT approach not only for the quantum mechanics of the electrons in a solute, but also simultaneously for the statistical mechanics of the molecules in a surrounding equilibrium liquid solvent. Specifically, we develop a new universal description for the interaction of electrons with an arbitrary liquid, providing the missing link to finally transform JDFT into a practical tool for the realistic description of chemical processes in solution. This approach predicts accurate solvation free energies and surrounding atomic-scale liquid structure for molecules and surfaces in multiple solvents without refitting, all at a fraction of the computational cost of methods of comparable detail and accuracy. To demonstrate the potential impact of this method, we determine the structure of the solid/liquid interface, offering compelling agreement with more accurate (but much more computationally intensive) theories and with X-ray reflectivity measurements.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
JDFTx: software for joint density-functional theory
Authors:
Ravishankar Sundararaman,
Kendra Letchworth-Weaver,
Kathleen A. Schwarz,
Deniz Gunceler,
Yalcin Ozhabes,
T. A. Arias
Abstract:
Density-functional theory (DFT) has revolutionized computational prediction of atomic-scale properties from first principles in physics, chemistry and materials science. Continuing development of new methods is necessary for accurate predictions of new classes of materials and properties, and for connecting to nano- and mesoscale properties using coarse-grained theories. JDFTx is a fully-featured…
▽ More
Density-functional theory (DFT) has revolutionized computational prediction of atomic-scale properties from first principles in physics, chemistry and materials science. Continuing development of new methods is necessary for accurate predictions of new classes of materials and properties, and for connecting to nano- and mesoscale properties using coarse-grained theories. JDFTx is a fully-featured open-source electronic DFT software designed specifically to facilitate rapid development of new theories, models and algorithms. Using an algebraic formulation as an abstraction layer, compact C++11 code automatically performs well on diverse hardware including GPUs. This code hosts the development of joint density-functional theory (JDFT) that combines electronic DFT with classical DFT and continuum models of liquids for first-principles calculations of solvated and electrochemical systems. In addition, the modular nature of the code makes it easy to extend and interface with, facilitating the development of multi-scale toolkits that connect to ab initio calculations, e.g. photo-excited carrier dynamics combining electron and phonon calculations with electromagnetic simulations.
△ Less
Submitted 19 October, 2017; v1 submitted 11 August, 2017;
originally announced August 2017.
-
Grand canonical electronic density-functional theory: algorithms and applications to electrochemistry
Authors:
Ravishankar Sundararaman,
William A. Goddard III,
Tomas A. Arias
Abstract:
First-principles calculations combining density-functional theory and continuum solvation models enable realistic theoretical modeling and design of electrochemical systems. When a reaction proceeds in such systems, the number of electrons in the portion of the system treated quantum mechanically changes continuously, with a balancing charge appearing in the continuum electrolyte. A grand-canonica…
▽ More
First-principles calculations combining density-functional theory and continuum solvation models enable realistic theoretical modeling and design of electrochemical systems. When a reaction proceeds in such systems, the number of electrons in the portion of the system treated quantum mechanically changes continuously, with a balancing charge appearing in the continuum electrolyte. A grand-canonical ensemble of electrons at a chemical potential set by the electrode potential is therefore the ideal description of such systems that directly mimics the experimental condition. We present two distinct algorithms, a self-consistent field method (GC-SCF) and a direct variational free energy minimization method using auxiliary Hamiltonians (GC-AuxH), to solve the Kohn-Sham equations of electronic density-functional theory directly in the grand canonical ensemble at fixed potential. Both methods substantially improve performance compared to a sequence of conventional fixed-number calculations targeting the desired potential, with the GC-AuxH method additionally exhibiting reliable and smooth exponential convergence of the grand free energy. Finally, we apply grand-canonical DFT to the under-potential deposition of copper on platinum from chloride-containing electrolytes and show that chloride desorption, not partial copper monolayer formation, is responsible for the second voltammetric peak.
△ Less
Submitted 27 February, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
-
Structure of the photo-catalytically active surface of SrTiO3
Authors:
Manuel Plaza,
Xin Huang,
J. Y. Peter Ko,
Joel D. Brock,
Mei Shen,
Burton H. Simpson,
Joaquín Rodríguez-López,
Nicole L. Ritzert,
Héctor D. Abruña,
Kendra Letchworth-Weaver,
Deniz Gunceler,
T. A. Arias,
Darrell G. Schlom
Abstract:
A major goal of energy research is to use visible light to cleave water directly, without an applied voltage, into hydrogen and oxygen. Since the initial reports of the ultraviolet (UV) activity of TiO2 and SrTiO3 in the 1970s, researchers have pursued a fundamental understanding of the mechanistic and molecular-level phenomena involved in photo-catalysis. Although it requires UV light, after four…
▽ More
A major goal of energy research is to use visible light to cleave water directly, without an applied voltage, into hydrogen and oxygen. Since the initial reports of the ultraviolet (UV) activity of TiO2 and SrTiO3 in the 1970s, researchers have pursued a fundamental understanding of the mechanistic and molecular-level phenomena involved in photo-catalysis. Although it requires UV light, after four decades SrTiO3 is still the gold standard for splitting water. It is chemically stable and catalyzes both the hydrogen and the oxygen reactions without applied bias. While ultrahigh vacuum (UHV) surface science techniques have provided useful insights, we still know relatively little about the structure of electrodes in contact with electrolytes under operating conditions. Here, we report the surface structure evolution of a SrTiO3 electrode during water splitting, before and after training with a positive bias. Operando high-energy X-ray reflectivity measurements demonstrate that training the electrode irreversibly reorders the surface. Scanning electrochemical microscopy (SECM) at open circuit correlates this training with a tripling of the activity toward photo-induced water splitting. A novel first-principles joint density-functional theory (JDFT) simulation constrained to the X-ray data via a generalized penalty function identifies an anatase-like structure for the more active, trained surface.
△ Less
Submitted 5 August, 2015;
originally announced August 2015.
-
Stability and surface diffusion at lithium-electrolyte interphases with connections to dendrite suppression
Authors:
Yalcin Ozhabes,
Deniz Gunceler,
T. A. Arias
Abstract:
This work presents an ab initio exploration of fundamental mechanisms with direct relevance to dendrite formation at lithium-electrolyte interfaces. Specifically, we explore surface diffusion barriers and solvated surface energies of typical solid-electrolyte interphase layers of lithium metal electrodes. Our results indicate that surface diffusion is an important mechanism for understanding the r…
▽ More
This work presents an ab initio exploration of fundamental mechanisms with direct relevance to dendrite formation at lithium-electrolyte interfaces. Specifically, we explore surface diffusion barriers and solvated surface energies of typical solid-electrolyte interphase layers of lithium metal electrodes. Our results indicate that surface diffusion is an important mechanism for understanding the recently observed dendrite suppression from lithium-halide passivating layers, which were motivated by our previous work. Our results uncover possible mechanisms underlying a new pathway for mitigating dendridic electrodeposition of lithium on metal and thereby contribute to the ongoing efforts to develop stable lithium metal anodes for rechargeable battery systems.
△ Less
Submitted 22 April, 2015;
originally announced April 2015.
-
Spicing up continuum solvation models with SaLSA: the spherically-averaged liquid susceptibility ansatz
Authors:
Ravishankar Sundararaman,
Kathleen A. Schwarz,
Kendra Letchworth-Weaver,
T. A. Arias
Abstract:
Continuum solvation models enable electronic structure calculations of systems in liquid environments, but because of the large number of empirical parameters, they are limited to the class of systems in their fit set (typically organic molecules). Here, we derive a solvation model with no empirical parameters for the dielectric response by taking the linear response limit of a classical density f…
▽ More
Continuum solvation models enable electronic structure calculations of systems in liquid environments, but because of the large number of empirical parameters, they are limited to the class of systems in their fit set (typically organic molecules). Here, we derive a solvation model with no empirical parameters for the dielectric response by taking the linear response limit of a classical density functional for molecular liquids. This model directly incorporates the nonlocal dielectric response of the liquid using an angular momentum expansion, and with a single fit parameter for dispersion contributions it predicts solvation energies of neutral molecules with an RMS error of 1.3 kcal/mol in water and 0.8 kcal/mol in chloroform and carbon tetrachloride. We show that this model is more accurate for strongly polar and charged systems than previous solvation models because of the parameter-free electric response, and demonstrate its suitability for ab initio solvation, including self-consistent solvation in quantum Monte Carlo calculations.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.
-
Weighted-density functionals for cavity formation and dispersion energies in continuum solvation models
Authors:
Ravishankar Sundararaman,
Deniz Gunceler,
T. A. Arias
Abstract:
Continuum solvation models enable efficient first principles calculations of chemical reactions in solution, but require extensive parametrization and fitting for each solvent and class of solute systems. Here, we examine the assumptions of continuum solvation models in detail and replace empirical terms with physical models in order to construct a minimally-empirical solvation model. Specifically…
▽ More
Continuum solvation models enable efficient first principles calculations of chemical reactions in solution, but require extensive parametrization and fitting for each solvent and class of solute systems. Here, we examine the assumptions of continuum solvation models in detail and replace empirical terms with physical models in order to construct a minimally-empirical solvation model. Specifically, we derive solvent radii from the nonlocal dielectric response of the solvent from ab initio calculations, construct a closed-form and parameter-free weighted-density approximation for the free energy of the cavity formation, and employ a pair-potential approximation for the dispersion energy. We show that the resulting model with a single solvent-independent parameter: the electron density threshold ($n_c$), and a single solvent-dependent parameter: the dispersion scale factor ($s_6$), reproduces solvation energies of organic molecules in water, chloroform and carbon tetrachloride with RMS errors of 1.1, 0.6 and 0.5 kcal/mol respectively. We additionally show that fitting the solvent-dependent $s_6$ parameter to the solvation energy of a single non-polar molecule does not substantially increase these errors. Parametrization of this model for other solvents, therefore, requires minimal effort and is possible without extensive databases of experimental solvation free energies.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Universal iso-density polarizable continuum model for molecular solvents
Authors:
Deniz Gunceler,
T. A. Arias
Abstract:
Implicit electron-density solvation models based on joint density-functional theory offer a computationally efficient solution to the problem of calculating thermodynamic quantities of solvated systems from firstprinciples quantum mechanics. However, despite much recent interest in such models, to date the applicability of such models in the plane-wave context to non-aqueous solvents has been limi…
▽ More
Implicit electron-density solvation models based on joint density-functional theory offer a computationally efficient solution to the problem of calculating thermodynamic quantities of solvated systems from firstprinciples quantum mechanics. However, despite much recent interest in such models, to date the applicability of such models in the plane-wave context to non-aqueous solvents has been limited because the determination of the model parameters requires fitting to a large database of experimental solvation energies for each new solvent considered. This work presents an alternate approach which allows development of new iso-density models for a large class of protic and aprotic solvents from only simple, single-molecule ab initio calculations and readily available bulk thermodynamic data.
△ Less
Submitted 11 February, 2015; v1 submitted 25 March, 2014;
originally announced March 2014.
-
A recipe for free-energy functionals of polarizable molecular fluids
Authors:
Ravishankar Sundararaman,
Kendra Letchworth-Weaver,
T A Arias
Abstract:
Classical density-functional theory is the most direct approach to equilibrium structures and free energies of inhomogeneous liquids, but requires the construction of an approximate free-energy functional for each liquid of interest. We present a general recipe for constructing functionals for small-molecular liquids based only on bulk experimental properties and ab initio calculations of a single…
▽ More
Classical density-functional theory is the most direct approach to equilibrium structures and free energies of inhomogeneous liquids, but requires the construction of an approximate free-energy functional for each liquid of interest. We present a general recipe for constructing functionals for small-molecular liquids based only on bulk experimental properties and ab initio calculations of a single solvent molecule. This recipe combines the exact free energy of the non-interacting system with fundamental measure theory for the repulsive contribution and a weighted density functional for the short-ranged attractive interactions. We add to these ingredients a weighted polarization functional for the long-range correlations in both the rotational and molecular-polarizability contributions to the dielectric response. We also perform molecular dynamics calculations for the free energy of cavity formation and the high-field dielectric response, and show that our free-energy functional adequately describes these properties (which are key for accurate solvation calculations) for all three solvents in our study: water, chloroform and carbon tetrachloride.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Nanoscale Imaging of Lithium Ion Distribution During In Situ Operation of Battery Electrode and Electrolyte
Authors:
Megan E. Holtz,
Yingchao Yu,
Deniz Gunceler,
Jie Gao,
Ravishankar Sundararaman,
Kathleen A. Schwarz,
Tomás A. Arias,
Héctor D. Abruña,
David A. Muller
Abstract:
A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and localized information from individual grains and particles. Here we describe an approach that images the nanoscale distribution of ions during electrochemical c…
▽ More
A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and localized information from individual grains and particles. Here we describe an approach that images the nanoscale distribution of ions during electrochemical charging of a battery in a transmission electron microscope liquid flow cell. We use valence energy-loss spectroscopy to track both solvated and intercalated ions, with electronic structure fingerprints of the solvated ions identified using an ab initio non-linear response theory. Equipped with the new electrochemical cell holder, nanoscale spectroscopy and theory, we have been able to determine the lithiation state of a LiFePO4 electrode and surrounding aqueous electrolyte in real time with nanoscale resolution during electrochemical charge and discharge. We follow lithium transfer between electrode and electrolyte and observe charging dynamics in the cathode that differ among individual particles. This technique represents a general approach for the operando nanoscale imaging of electrochemically active ions in a wide range of electrical energy storage systems.
△ Less
Submitted 25 November, 2013;
originally announced November 2013.
-
Ideal regularization of the Coulomb singularity in exact exchange by Wigner-Seitz truncated interactions: towards chemical accuracy in non-trivial systems
Authors:
Ravishankar Sundararaman,
T. A. Arias
Abstract:
Hybrid density functionals show great promise for chemically-accurate first principles calculations, but their high computational cost limits their application in non-trivial studies, such as exploration of reaction pathways of adsorbents on periodic surfaces. One factor responsible for their increased cost is the dense Brillouin-zone sampling necessary to accurately resolve an integrable singular…
▽ More
Hybrid density functionals show great promise for chemically-accurate first principles calculations, but their high computational cost limits their application in non-trivial studies, such as exploration of reaction pathways of adsorbents on periodic surfaces. One factor responsible for their increased cost is the dense Brillouin-zone sampling necessary to accurately resolve an integrable singularity in the exact exchange energy. We analyze this singularity within an intuitive formalism based on Wannier-function localization and analytically prove Wigner-Seitz truncation to be the ideal method for regularizing the Coulomb potential in the exchange kernel. We show that this method is limited only by Brillouin-zone discretization errors in the Kohn-Sham orbitals, and hence converges the exchange energy exponentially with the number of k-points used to sample the Brillouin zone for all but zero-temperature metallic systems. To facilitate the implementation of this method, we develop a general construction for the plane-wave Coulomb kernel truncated on the Wigner-Seitz cell in one, two or three lattice directions. We compare several regularization methods for the exchange kernel in a variety of real systems including low-symmetry crystals and low-dimensional materials. We find that our Wigner-Seitz truncation systematically yields the best k-point convergence for the exchange energy of all these systems and delivers an accuracy to hybrid functionals comparable to semi-local and screened-exchange functionals at identical k-point sets.
△ Less
Submitted 16 April, 2013; v1 submitted 25 February, 2013;
originally announced February 2013.
-
Efficient classical density-functional theories of rigid-molecular fluids and a simplified free energy functional for liquid water
Authors:
Ravishankar Sundararaman,
T. A. Arias
Abstract:
Classical density-functional theory provides an efficient alternative to molecular dynamics simulations for understanding the equilibrium properties of inhomogeneous fluids. However, application of density-functional theory to multi-site molecular fluids has so far been limited by complications due to the implicit molecular geometry constraints on the site densities, whose resolution typically req…
▽ More
Classical density-functional theory provides an efficient alternative to molecular dynamics simulations for understanding the equilibrium properties of inhomogeneous fluids. However, application of density-functional theory to multi-site molecular fluids has so far been limited by complications due to the implicit molecular geometry constraints on the site densities, whose resolution typically requires expensive Monte Carlo methods. Here, we present a general scheme of circumventing this so-called inversion problem: compressed representations of the orientation density. This approach allows us to combine the superior iterative convergence properties of multipole representations of the fluid configuration with the improved accuracy of site-density functionals. Next, from a computational perspective, we show how to extend the DFT++ algebraic formulation of electronic density-functional theory to the classical fluid case and present a basis-independent discretization of our formulation for molecular classical density-functional theory. Finally, armed with the above general framework, we construct a simplified free-energy functional for water which captures the radial distributions, cavitation energies, and the linear and non-linear dielectric response of liquid water. The resulting approach will enable efficient and reliable first-principles studies of atomic-scale processes in contact with solution or other liquid environments.
△ Less
Submitted 31 January, 2013;
originally announced February 2013.
-
The importance of nonlinear fluid response in joint density-functional theory studies of battery systems
Authors:
Deniz Gunceler,
Kendra Letchworth-Weaver,
Ravishankar Sundararaman,
Kathleen A Schwarz,
T A Arias
Abstract:
Delivering the full benefits of first principles calculations to battery materials demands the development of accurate and computationally-efficient electronic structure methods that incorporate the effects of the electrolyte environment and electrode potential. Realistic electrochemical interfaces containing polar surfaces are beyond the regime of validity of existing continuum solvation theories…
▽ More
Delivering the full benefits of first principles calculations to battery materials demands the development of accurate and computationally-efficient electronic structure methods that incorporate the effects of the electrolyte environment and electrode potential. Realistic electrochemical interfaces containing polar surfaces are beyond the regime of validity of existing continuum solvation theories developed for molecules, due to the presence of significantly stronger electric fields. We present an ab initio theory of the nonlinear dielectric and ionic response of solvent environments within the framework of joint density-functional theory, with precisely the same optimizable parameters as conventional polarizable continuum models. We demonstrate that the resulting nonlinear theory agrees with the standard linear models for organic molecules and metallic surfaces under typical operating conditions. However, we find that the saturation effects in the rotational response of polar solvent molecules, inherent to our nonlinear theory, are crucial for a qualitatively correct description of the ionic surfaces typical of the solid electrolyte interface.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Framework for solvation in quantum Monte Carlo
Authors:
Kathleen A. Schwarz,
Ravishankar Sundararaman,
Kendra Letchworth-Weaver,
Tomás A. Arias,
Richard G. Hennig
Abstract:
Employing a classical density-functional description of liquid environments, we introduce a rigorous method for the diffusion quantum Monte Carlo calculation of free energies and thermodynamic averages of solvated systems that requires neither thermodynamic sampling nor explicit solvent electrons. We find that this method yields promising results and small convergence errors for a set of test mole…
▽ More
Employing a classical density-functional description of liquid environments, we introduce a rigorous method for the diffusion quantum Monte Carlo calculation of free energies and thermodynamic averages of solvated systems that requires neither thermodynamic sampling nor explicit solvent electrons. We find that this method yields promising results and small convergence errors for a set of test molecules. It is implemented readily and is applicable to a range of challenges in condensed matter, including the study of transition states of molecular and surface reactions in liquid environments.
△ Less
Submitted 27 April, 2012;
originally announced April 2012.
-
Structural phase transitions in Ruddlesden-Popper phases of strontium titanate: {\em ab initio} and inhomogeneous Ginzburg-Landau approaches
Authors:
Jeehye Lee,
Tomás A. Arias
Abstract:
We present the first systematic {\em ab initio} study of anti-ferrodistortive (AFD) order in Ruddlesden-Popper (RP) phases of strontium titanate, Sr$_{1+n}$Ti$_n$O$_{3n+1}$, as a function of both compressive epitaxial strain and phase number $n$. We find all RP phases to exhibit AFD order under a significant range of strains, recovering the bulk AFD order as $\sim 1/n^2$. A Ginzburg-Landau Hamilto…
▽ More
We present the first systematic {\em ab initio} study of anti-ferrodistortive (AFD) order in Ruddlesden-Popper (RP) phases of strontium titanate, Sr$_{1+n}$Ti$_n$O$_{3n+1}$, as a function of both compressive epitaxial strain and phase number $n$. We find all RP phases to exhibit AFD order under a significant range of strains, recovering the bulk AFD order as $\sim 1/n^2$. A Ginzburg-Landau Hamiltonian generalized to include inter-octahedral interactions reproduces our {\em ab initio} results well, opening a pathway to understanding other nanostructured perovskite systems.
△ Less
Submitted 19 August, 2010;
originally announced August 2010.
-
Embedding theory for excited states with inclusion of self-consistent environment screening
Authors:
Johannes Lischner,
Dominika Zgid,
Garnet Kin-Lic Chan,
T. A. Arias
Abstract:
We present a general embedding theory of electronic excitations of a relatively small, localized system in contact with an extended, chemically complex environment. We demonstrate how to include the screening response of the environment into highly accurate electronic structure calculation of the localized system by means of an effective interaction between the electrons, which contains only scr…
▽ More
We present a general embedding theory of electronic excitations of a relatively small, localized system in contact with an extended, chemically complex environment. We demonstrate how to include the screening response of the environment into highly accurate electronic structure calculation of the localized system by means of an effective interaction between the electrons, which contains only screening processes occurring in the environment. For the common case of a localized system which constitutes an inhomogeneity in an otherwise homogeneous system, such as a defect in a crystal, we show how matrix elements of the environment-screened interaction can be calculated from density-functional calculations of the homogeneous system only. We apply our embedding theory to the calculation of excitation energies in crystalline ethylene.
△ Less
Submitted 27 February, 2010;
originally announced March 2010.
-
The Hopgrid algorithm: multilevel synthesis of multigrid and wavelet theory
Authors:
D. Yesilleten,
T. A. Arias
Abstract:
The multigrid algorithm is a multilevel approach to accelerate the numerical solution of discretized differential equations in physical problems involving long-range interactions. Multiresolution analysis of wavelet theory provides an efficient representation of functions which exhibit localized bursts of short length-scale behavior. Applications such as computing the electrostatic field in and…
▽ More
The multigrid algorithm is a multilevel approach to accelerate the numerical solution of discretized differential equations in physical problems involving long-range interactions. Multiresolution analysis of wavelet theory provides an efficient representation of functions which exhibit localized bursts of short length-scale behavior. Applications such as computing the electrostatic field in and around a molecule should benefit from both approaches. In this work, we demonstrate how a novel interpolating wavelet transform, which in itself is the synthesis of finite element analysis and wavelet theory, may be used as the mathematical bridge to connect the two approaches. The result is a specialized multigrid algorithm which may be applied to problems expressed in wavelet bases. With this approach, interpolation and restriction operators and grids for the multigrid algorithm are predetermined by an interpolating multiresolution analysis. We will present the new method and contrast its efficiency with standard wavelet and multigrid approaches.
△ Less
Submitted 22 June, 1998;
originally announced June 1998.
-
The Geometry of Algorithms with Orthogonality Constraints
Authors:
Alan Edelman,
T. A. Arias,
Steven T. Smith
Abstract:
In this paper we develop new Newton and conjugate gradient algorithms on the Grassmann and Stiefel manifolds. These manifolds represent the constraints that arise in such areas as the symmetric eigenvalue problem, nonlinear eigenvalue problems, electronic structures computations, and signal processing. In addition to the new algorithms, we show how the geometrical framework gives penetrating new…
▽ More
In this paper we develop new Newton and conjugate gradient algorithms on the Grassmann and Stiefel manifolds. These manifolds represent the constraints that arise in such areas as the symmetric eigenvalue problem, nonlinear eigenvalue problems, electronic structures computations, and signal processing. In addition to the new algorithms, we show how the geometrical framework gives penetrating new insights allowing us to create, understand, and compare algorithms. The theory proposed here provides a taxonomy for numerical linear algebra algorithms that provide a top level mathematical view of previously unrelated algorithms. It is our hope that developers of new algorithms and perturbation theories will benefit from the theory, methods, and examples in this paper.
△ Less
Submitted 19 June, 1998;
originally announced June 1998.