-
Beam Dynamics Framework Incorporating Acceleration to Define the Minimum Aperture in Two Focusing Schemes for Proton Radiotherapy Linac
Authors:
Matthew Southerby,
Robert Apsimon
Abstract:
In this paper, a self-consistent transverse beam dynamics framework is demonstrated, that incorporates acceleration into the transverse beam dynamics studies for a proton linac machine. Two focusing schemes are developed and discussed; the FODO-like scheme, and the minimum aperture scheme. The FODO-like scheme is a simple scheme, requiring only one quadrupole per cavity. The scheme is analytically…
▽ More
In this paper, a self-consistent transverse beam dynamics framework is demonstrated, that incorporates acceleration into the transverse beam dynamics studies for a proton linac machine. Two focusing schemes are developed and discussed; the FODO-like scheme, and the minimum aperture scheme. The FODO-like scheme is a simple scheme, requiring only one quadrupole per cavity. The scheme is analytically solved to minimise the beam size at the cavity entrance/exit and ensures a constant beam size along the lattice, with respect to adiabatic dam** due to longitudinally accelerating rf cavities. The minimum aperture scheme describes the regime that matches the beam ellipse to the acceptance ellipse of a cavity, allowing for the smallest possible aperture, for a given cavity length. A simple approximation of an rf cavity map is determined to allow changes in particle energy along a lattice, and acceleration is assumed only in the longitudinal direction.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Fast Tracking of 6D Particle Phase Space Using the FC2CT Algorithm for rf Cavities
Authors:
Matthew Southerby,
Robert Apsimon
Abstract:
In this paper, a fast cell to cell tracking algorithm (FC2CT) is developed, that determines the change in 6D phase space of a particle beam through rf accelerating cavities operated in both Standing and Traveling Wave modes. The performance is compared to well trusted tracking codes - ASTRA and RF-Track - for proton beams with relativistic beta = 0.5. The FC2CT algorithm produces a complete analyt…
▽ More
In this paper, a fast cell to cell tracking algorithm (FC2CT) is developed, that determines the change in 6D phase space of a particle beam through rf accelerating cavities operated in both Standing and Traveling Wave modes. The performance is compared to well trusted tracking codes - ASTRA and RF-Track - for proton beams with relativistic beta = 0.5. The FC2CT algorithm produces a complete analytical method to determine the change in particle momentum, with the constant particle velocity approximation over the integration region. Additional developments for FC2CT are discussed, such as altering the integration length. FC2CT can be used as a fast method class in common tracking codes to perform fast simulations through rf cavities.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
The AWAKE Run 2 programme and beyond
Authors:
Edda Gschwendtner,
Konstantin Lotov,
Patric Muggli,
Matthew Wing,
Riccardo Agnello,
Claudia Christina Ahdida,
Maria Carolina Amoedo Goncalves,
Yanis Andrebe,
Oznur Apsimon,
Robert Apsimon,
Jordan Matias Arnesano,
Anna-Maria Bachmann,
Diego Barrientos,
Fabian Batsch,
Vittorio Bencini,
Michele Bergamaschi,
Patrick Blanchard,
Philip Nicholas Burrows,
Birger Buttenschön,
Allen Caldwell,
James Chappell,
Eric Chevallay,
Moses Chung,
David Andrew Cooke,
Heiko Damerau
, et al. (77 additional authors not shown)
Abstract:
Plasma wakefield acceleration is a promising technology to reduce the size of particle accelerators. Use of high energy protons to drive wakefields in plasma has been demonstrated during Run 1 of the AWAKE programme at CERN. Protons of energy 400 GeV drove wakefields that accelerated electrons to 2 GeV in under 10 m of plasma. The AWAKE collaboration is now embarking on Run 2 with the main aims to…
▽ More
Plasma wakefield acceleration is a promising technology to reduce the size of particle accelerators. Use of high energy protons to drive wakefields in plasma has been demonstrated during Run 1 of the AWAKE programme at CERN. Protons of energy 400 GeV drove wakefields that accelerated electrons to 2 GeV in under 10 m of plasma. The AWAKE collaboration is now embarking on Run 2 with the main aims to demonstrate stable accelerating gradients of 0.5-1 GV/m, preserve emittance of the electron bunches during acceleration and develop plasma sources scalable to 100s of metres and beyond. By the end of Run 2, the AWAKE scheme should be able to provide electron beams for particle physics experiments and several possible experiments have already been evaluated. This article summarises the programme of AWAKE Run 2 and how it will be achieved as well as the possible application of the AWAKE scheme to novel particle physics experiments.
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Creating Exact Multipolar Fields with Azimuthally Modulated RF Cavities
Authors:
L. M. Wroe,
S. L. Sheehy,
R. J. Apsimon
Abstract:
RF cavities used in modern particle accelerators operate in TM$_{m10}$-like modes composed of a single, dominant multipole of order $m$; $m=0$ modes are used for the longitudinal acceleration of a particle beam and $m\neq0$ modes for controlling transverse beam dynamics. The practical design of the latter, however, can be complex and require extensive analysis through the iteration of both approxi…
▽ More
RF cavities used in modern particle accelerators operate in TM$_{m10}$-like modes composed of a single, dominant multipole of order $m$; $m=0$ modes are used for the longitudinal acceleration of a particle beam and $m\neq0$ modes for controlling transverse beam dynamics. The practical design of the latter, however, can be complex and require extensive analysis through the iteration of both approximate mathematical models and computationally expensive simulations to optimise the performance of the structure. In this paper we present a new, systematic method for designing azimuthally modulated RF cavities that support modes composed of any number and magnitude of user-specified transverse multipoles, either with or without a longitudinally accelerating component. Two case studies are presented of RF cavity designs that support modes composed of a longitudinally accelerating field in addition to a single transverse multipole, and designs that support modes composed of two transverse multipoles. We discuss generalising the discoveries and conclusions from the two case studies to designing cavities that support modes composed of any number of multipoles. The theoretical work is verified with analysis of 3D simulations and experimental measurements are presented of a cavity operating in a 3 GHz mode that simultaneously longitudinally accelerates and transversely focuses a beam.
△ Less
Submitted 17 May, 2022; v1 submitted 10 November, 2021;
originally announced November 2021.
-
Analysis of Proton Bunch Parameters in the AWAKE Experiment
Authors:
V. Hafych,
A. Caldwell,
R. Agnello,
C. C. Ahdida,
M. Aladi,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschön,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
A. Dexter,
S. Doebert
, et al. (63 additional authors not shown)
Abstract:
A precise characterization of the incoming proton bunch parameters is required to accurately simulate the self-modulation process in the Advanced Wakefield Experiment (AWAKE). This paper presents an analysis of the parameters of the incoming proton bunches used in the later stages of the AWAKE Run 1 data-taking period. The transverse structure of the bunch is observed at multiple positions along t…
▽ More
A precise characterization of the incoming proton bunch parameters is required to accurately simulate the self-modulation process in the Advanced Wakefield Experiment (AWAKE). This paper presents an analysis of the parameters of the incoming proton bunches used in the later stages of the AWAKE Run 1 data-taking period. The transverse structure of the bunch is observed at multiple positions along the beamline using scintillating or optical transition radiation screens. The parameters of a model that describes the bunch transverse dimensions and divergence are fitted to represent the observed data using Bayesian inference. The analysis is tested on simulated data and then applied to the experimental data.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Simulation and Experimental Study of Proton Bunch Self-Modulation in Plasma with Linear Density Gradients
Authors:
P. I. Morales Guzmán,
P. Muggli,
R. Agnello,
C. C. Ahdida,
M. Aladi,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
F. Braunmüller,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter
, et al. (66 additional authors not shown)
Abstract:
We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported in arXiv:2007.14894v2: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency vari…
▽ More
We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported in arXiv:2007.14894v2: with negative gradients, the charge of the modulated bunch is lower than with positive gradients. In addition, the bunch modulation frequency varies with gradient. Simulation results show that dephasing of the wakefields with respect to the relativistic protons along the plasma is the main cause for the loss of charge. The study of the modulation frequency reveals details about the evolution of the self-modulation process along the plasma. In particular for negative gradients, the modulation frequency across time-resolved images of the bunch indicates the position along the plasma where protons leave the wakefields. Simulations and experimental results are in excellent agreement.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Pushing the Capture Limit of Thermionic Gun Linacs
Authors:
Sadiq Setiniyaz,
Alejandro Castilla,
Julian McKenzie,
Robert Apsimon,
Boris Militsyn,
Deepa Angal-Kalinin,
Graeme Burt
Abstract:
Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems due to back bombardment, shortening of cathode life, etc. Any solution to increase capture should be effective, simple, reli…
▽ More
Although accelerator technology has matured sufficiently, state-of-the-art X-ray linacs for radiotherapy and cargo-scanning capture merely 30-50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems due to back bombardment, shortening of cathode life, etc. Any solution to increase capture should be effective, simple, reliable, compact, and low cost in order to be adopted by industry. To address this, we present the design of a 6 MeV high capture efficiency S-band electron linac that captures 90% of the initial DC beam. This linac does not require any extra parts that would increase the cost as the high efficiency is achieved via a low-field-amplitude in the first bunching cell to decrease the number of backstreaming electrons, to velocity bunch the electron beam, and recapture backstreaming electrons. Under the low field amplitude, any electrons launched at decelerating phases travel backward with low speeds, thus most of them can catch the next RF cycle, and get re-accelerated/recaptured. As the electron speed is low, the cell length is also shorter than existing linacs. Such a short field is achieved by the use of asymmetric cells with differential coupling to the side-coupled cells. Our novel design has implications for all commercial high current thermionic gun linacs for increasing beam current and increasing cathode lifetime.
△ Less
Submitted 31 August, 2021; v1 submitted 20 May, 2021;
originally announced May 2021.
-
Filling Pattern Dependence of Regenerative Beam Breakup Instability in Energy Recovery Linacs
Authors:
Sadiq Setiniyaz,
Robert Apsimon,
Peter H. Williams
Abstract:
Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for Energy Recovery Linacs with multiple passes where a relatively small amount of charge can result in a large beam current. Recent studies have shown that the choice of filling pattern and recirculation schem…
▽ More
Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for Energy Recovery Linacs with multiple passes where a relatively small amount of charge can result in a large beam current. Recent studies have shown that the choice of filling pattern and recirculation scheme for a multi-pass energy recovery linac can drastically affect the interactions between the beam and RF system. In this paper we further explore this topic to study how filling patterns affect the beam breakup instability and how this can allow us to optimise the design in order to minimise this effect. We present a theoretical model of the beam-RF interaction as well as numerical modeling and show that the threshold current can vary by factors of 2-4, and potentially even more depending on the machine design parameters. Therefore a judicious choice of filling pattern can greatly increase the onset of BBU, expanding the utility of future ERLs.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Transition between Instability and Seeded Self-Modulation of a Relativistic Particle Bunch in Plasma
Authors:
F. Batsch,
P. Muggli,
R. Agnello,
C. C. Ahdida,
M. C. Amoedo Goncalves,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
P. Blanchard,
F. Braunmüller,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
H. L. Deubner,
S. Doebert,
J. Farmer
, et al. (72 additional authors not shown)
Abstract:
We use a relativistic ionization front to provide various initial transverse wakefield amplitudes for the self-modulation of a long proton bunch in plasma. We show experimentally that, with sufficient initial amplitude ($\ge(4.1\pm0.4)$ MV/m), the phase of the modulation along the bunch is reproducible from event to event, with 3 to 7% (of 2$π$) rms variations all along the bunch. The phase is not…
▽ More
We use a relativistic ionization front to provide various initial transverse wakefield amplitudes for the self-modulation of a long proton bunch in plasma. We show experimentally that, with sufficient initial amplitude ($\ge(4.1\pm0.4)$ MV/m), the phase of the modulation along the bunch is reproducible from event to event, with 3 to 7% (of 2$π$) rms variations all along the bunch. The phase is not reproducible for lower initial amplitudes. We observe the transition between these two regimes. Phase reproducibility is essential for deterministic external injection of particles to be accelerated.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Experimental study of extended timescale dynamics of a plasma wakefield driven by a self-modulated proton bunch
Authors:
J. Chappell,
E. Adli,
R. Agnello,
M. Aladi,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschön,
A. Caldwell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
L. H. Deubner,
A. Dexter,
G. P. Djotyan,
S. Doebert
, et al. (74 additional authors not shown)
Abstract:
Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield cau…
▽ More
Plasma wakefield dynamics over timescales up to 800 ps, approximately 100 plasma periods, are studied experimentally at the Advanced Wakefield Experiment (AWAKE). The development of the longitudinal wakefield amplitude driven by a self-modulated proton bunch is measured using the external injection of witness electrons that sample the fields. In simulation, resonant excitation of the wakefield causes plasma electron trajectory crossing, resulting in the development of a potential outside the plasma boundary as electrons are transversely ejected. Trends consistent with the presence of this potential are experimentally measured and their dependence on wakefield amplitude are studied via seed laser timing scans and electron injection delay scans.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Proton beam defocusing in AWAKE: comparison of simulations and measurements
Authors:
A. A. Gorn,
M. Turner,
E. Adli,
R. Agnello,
M. Aladi,
Y. Andrebe,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
M. A. Baistrukov,
F. Batsch,
M. Bergamaschi,
P. Blanchard,
P. N. Burrows,
B. Buttenschon,
A. Caldwell,
J. Chappell,
E. Chevallay,
M. Chung,
D. A. Cooke,
H. Damerau,
C. Davut,
G. Demeter,
L. H. Deubner,
A. Dexter
, et al. (74 additional authors not shown)
Abstract:
In 2017, AWAKE demonstrated the seeded self-modulation (SSM) of a 400 GeV proton beam from the Super Proton Synchrotron (SPS) at CERN. The angular distribution of the protons deflected due to SSM is a quantitative measure of the process, which agrees with simulations by the two-dimensional (axisymmetric) particle-in-cell code LCODE. Agreement is achieved for beam populations between $10^{11}$ and…
▽ More
In 2017, AWAKE demonstrated the seeded self-modulation (SSM) of a 400 GeV proton beam from the Super Proton Synchrotron (SPS) at CERN. The angular distribution of the protons deflected due to SSM is a quantitative measure of the process, which agrees with simulations by the two-dimensional (axisymmetric) particle-in-cell code LCODE. Agreement is achieved for beam populations between $10^{11}$ and $3 \times 10^{11}$ particles, various plasma density gradients ($-20 ÷20\%$) and two plasma densities ($2\times 10^{14} \text{cm}^{-3}$ and $7 \times 10^{14} \text{cm}^{-3}$). The agreement is reached only in the case of a wide enough simulation box (at least five plasma wavelengths).
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs
Authors:
S. Setiniyaz,
R. Apsimon,
P. H. Williams
Abstract:
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams ($\sim$GW) while only requiring low power ($\sim$kW) RF sources. This is achieved by decelerating the used bunches and using the energy they deposit in the accelerating structures to accelerate new bunches. We present studies of the impact of the bunch packet filling pattern on the performance…
▽ More
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams ($\sim$GW) while only requiring low power ($\sim$kW) RF sources. This is achieved by decelerating the used bunches and using the energy they deposit in the accelerating structures to accelerate new bunches. We present studies of the impact of the bunch packet filling pattern on the performance of the accelerating RF system. We perform RF beam loading simulations under various noise levels and beam loading phases with different injection schemes. We also present a mathematical description of the RF system during the beam loading, which can identify optimal beam filling patterns under different conditions. The results of these studies have major implications for design constraints for future energy recovery linacs, by providing a quantitative metric for different machine designs and topologies.
△ Less
Submitted 17 July, 2020; v1 submitted 13 January, 2020;
originally announced January 2020.
-
Design and operation of a prototype interaction point beam collision feedback system for the International Linear Collider
Authors:
R. J. Apsimon,
D. R. Bett,
N. Blaskovic Kraljevic,
R. M. Bodenstein,
T. Bromwich,
P. N. Burrows,
G. B. Christian,
B. D. Constance,
M. R. Davis,
C. Perry,
R. Ramjiawan
Abstract:
A high-resolution, intratrain position feedback system has been developed to achieve and maintain collisions at the proposed future electron-positron International Linear Collider (ILC). A prototype has been commissioned and tested with a beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. It consists of a stripline beam posit…
▽ More
A high-resolution, intratrain position feedback system has been developed to achieve and maintain collisions at the proposed future electron-positron International Linear Collider (ILC). A prototype has been commissioned and tested with a beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. It consists of a stripline beam position monitor (BPM) with analogue signal-processing electronics, a custom digital board to perform the feedback calculation, and a stripline kicker driven by a high-current amplifier. The closed-loop feedback latency is 148 ns. For a three-bunch train with 154 ns bunch spacing, the feedback system has been used to stabilize the third bunch to 450 nm. The kicker response is linear, and the feedback performance is maintained, over a correction range of over $\pm$60 μm. The propagation of the correction has been confirmed by using an independent stripline BPM located downstream of the feedback system. The system has been demonstrated to meet the BPM resolution, beam kick, and latency requirements for the ILC.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Prediction of Beam Losses during Crab Cavity Quenches at the HL-LHC
Authors:
Robert Apsimon,
Graeme Burt,
Amos Dexter,
Nick Shipman,
Philippe Baudrenghien,
Rama Calaga,
Alejandro Castilla,
Alick Macpherson,
Kyrre Ness Sjobak,
Andrea Santamaria Garcia,
Niall Stapley,
Androula Alekou,
Robert Appleby
Abstract:
Studies of the crab cavities at KEKB revealed that the RF phase could shift by up to 50o within ~50 us during a quench; while the cavity voltage is still at approximately 75% of its nominal amplitude. If such a failure were to occur on the HL-LHC crab cavities, it is likely that the machine would sustain substantial damage to the beam line and surrounding infrastructure due to uncontrolled beam lo…
▽ More
Studies of the crab cavities at KEKB revealed that the RF phase could shift by up to 50o within ~50 us during a quench; while the cavity voltage is still at approximately 75% of its nominal amplitude. If such a failure were to occur on the HL-LHC crab cavities, it is likely that the machine would sustain substantial damage to the beam line and surrounding infrastructure due to uncontrolled beam loss before the machine protection system could dump the beam. We have developed a low-level RF system model, including detuning mechanisms and beam loading, and use this to simulate the behaviour of a crab cavity during a quench, modeling the low-level RF system, detuning mechanisms and beam loading. We supplement this with measurement data of the actual RF response of the proof of principle Double-Quarter Wave Crab Cravity during a quench. Extrapolating these measurements to the HL-LHC, we show that Lorentz Force detuning is the dominant effect leading to phase shifts in the crab cavity during quenches; rather than pressure detuning which is expected to be dominant for the KEKB crab cavities. The total frequency shift for the HL-LHC crab cavities during quenches is expected to be about 460 Hz, leading to a phase shift of no more than 3o. The results of the quench model are read into a particle tracking simulation, SixTrack, and used to determine the effect of quenches on the HL-LHC beam. The quench model has been benchmarked against the KEKB experimental measurements. In this paper we present the results of the simulations on a crab cavity failure for HL-LHC as well as for the SPS and show that beam loss is negligible when using a realistic low-level RF response.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Experimental observation of proton bunch modulation in a plasma, at varying plasma densities
Authors:
E. Adli,
A. Ahuja,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
D. Barrientos,
M. M. Barros,
J. Batkiewicz,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
B. Biskup,
A. Boccardi,
T. Bogey,
T. Bohl,
C. Bracco,
F. Braunmüller,
S. Burger,
G. Burt,
S. Bustamante,
B. Buttenschön,
A. Caldwell,
M. Cascella,
J. Chappell
, et al. (87 additional authors not shown)
Abstract:
We give direct experimental evidence for the observation of the full transverse self-modulation of a relativistic proton bunch propagating through a dense plasma. The bunch exits the plasma with a density modulation resulting from radial wakefield effects with a period reciprocal to the plasma frequency. We show that the modulation is seeded by using an intense laser pulse co-propagating with the…
▽ More
We give direct experimental evidence for the observation of the full transverse self-modulation of a relativistic proton bunch propagating through a dense plasma. The bunch exits the plasma with a density modulation resulting from radial wakefield effects with a period reciprocal to the plasma frequency. We show that the modulation is seeded by using an intense laser pulse co-propagating with the proton bunch which creates a relativistic ionization front within the bunch. We show by varying the plasma density over one order of magnitude that the modulation period scales with the expected dependence on the plasma density.
△ Less
Submitted 1 April, 2019; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Acceleration of electrons in the plasma wakefield of a proton bunch
Authors:
The AWAKE Collaboration,
E. Adli,
A. Ahuja,
O. Apsimon,
R. Apsimon,
A. -M. Bachmann,
D. Barrientos,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
T. Bohl,
C. Bracco,
F. Braunmueller,
G. Burt,
B. Buttenschoen,
A. Caldwell,
M. Cascella,
J. Chappell,
E. Chevallay,
M. Chung,
D. Cooke,
H. Damerau,
L. Deacon,
L. H. Deubner
, et al. (69 additional authors not shown)
Abstract:
High energy particle accelerators have been crucial in providing a deeper understanding of fundamental particles and the forces that govern their interactions. In order to increase the energy or reduce the size of the accelerator, new acceleration schemes need to be developed. Plasma wakefield acceleration, in which the electrons in a plasma are excited, leading to strong electric fields, is one s…
▽ More
High energy particle accelerators have been crucial in providing a deeper understanding of fundamental particles and the forces that govern their interactions. In order to increase the energy or reduce the size of the accelerator, new acceleration schemes need to be developed. Plasma wakefield acceleration, in which the electrons in a plasma are excited, leading to strong electric fields, is one such promising novel acceleration technique. Pioneering experiments have shown that an intense laser pulse or electron bunch traversing a plasma, drives electric fields of 10s GV/m and above. These values are well beyond those achieved in conventional RF accelerators which are limited to ~0.1 GV/m. A limitation of laser pulses and electron bunches is their low stored energy, which motivates the use of multiple stages to reach very high energies. The use of proton bunches is compelling, as they have the potential to drive wakefields and accelerate electrons to high energy in a single accelerating stage. The long proton bunches currently available can be used, as they undergo self-modulation, a particle-plasma interaction which longitudinally splits the bunch into a series of high density microbunches, which then act resonantly to create large wakefields. The AWAKE experiment at CERN uses intense bunches of protons, each of energy 400 GeV, with a total bunch energy of 19 kJ, to drive a wakefield in a 10 m long plasma. Bunches of electrons are injected into the wakefield formed by the proton microbunches. This paper presents measurements of electrons accelerated up to 2 GeV at AWAKE. This constitutes the first demonstration of proton-driven plasma wakefield acceleration. The potential for this scheme to produce very high energy electron bunches in a single accelerating stage means that the results shown here are a significant step towards the development of future high energy particle accelerators.
△ Less
Submitted 11 October, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
AWAKE readiness for the study of the seeded self-modulation of a 400\,GeV proton bunch
Authors:
P. Muggli,
E. Adli,
R. Apsimon,
F. Asmus,
R. Baartman,
A. -M. Bachmann,
M. Barros Marin,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
B. Biskup,
A. Boccardi,
T. Bogey,
T. Bohl,
C. Bracco,
F. Braunmuller,
S. Burger,
G. Burt,
S. Bustamante,
B. Buttenschon,
A. Butterworth,
A. Caldwell,
M. Cascella,
E. Chevallay
, et al. (82 additional authors not shown)
Abstract:
AWAKE is a proton-driven plasma wakefield acceleration experiment. % We show that the experimental setup briefly described here is ready for systematic study of the seeded self-modulation of the 400\,GeV proton bunch in the 10\,m-long rubidium plasma with density adjustable from 1 to 10$\times10^{14}$\,cm$^{-3}$. % We show that the short laser pulse used for ionization of the rubidium vapor propag…
▽ More
AWAKE is a proton-driven plasma wakefield acceleration experiment. % We show that the experimental setup briefly described here is ready for systematic study of the seeded self-modulation of the 400\,GeV proton bunch in the 10\,m-long rubidium plasma with density adjustable from 1 to 10$\times10^{14}$\,cm$^{-3}$. % We show that the short laser pulse used for ionization of the rubidium vapor propagates all the way along the column, suggesting full ionization of the vapor. % We show that ionization occurs along the proton bunch, at the laser time and that the plasma that follows affects the proton bunch. %
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
AWAKE, The Advanced Proton Driven Plasma Wakefield Acceleration Experiment at CERN
Authors:
E. Gschwendtner,
E. Adli,
L. Amorim,
R. Apsimon,
R. Assmann,
A. -M. Bachmann,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
R. Bingham,
B. Biskup,
T. Bohl,
C. Bracco,
P. N. Burrows,
G. Burt,
B. Buttenschon,
A. Butterworth,
A. Caldwell,
M. Cascella,
E. Chevallay,
S. Cipiccia,
H. Damerau,
L. Deacon,
P. Dirksen
, et al. (66 additional authors not shown)
Abstract:
The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton be…
▽ More
The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) aims at studying plasma wakefield generation and electron acceleration driven by proton bunches. It is a proof-of-principle R&D experiment at CERN and the world's first proton driven plasma wakefield acceleration experiment. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV/c proton beam bunches from the SPS. The first experiments will focus on the self-modulation instability of the long (rms ~12 cm) proton bunch in the plasma. These experiments are planned for the end of 2016. Later, in 2017/2018, low energy (~15 MeV) electrons will be externally injected to sample the wakefields and be accelerated beyond 1 GeV. The main goals of the experiment will be summarized. A summary of the AWAKE design and construction status will be presented.
△ Less
Submitted 17 December, 2015;
originally announced December 2015.
-
Path to AWAKE: Evolution of the concept
Authors:
A. Caldwell,
E. Adli,
L. Amorim,
R. Apsimon,
T. Argyropoulos,
R. Assmann,
A. -M. Bachmann,
F. Batsch,
J. Bauche,
V. K. Berglyd Olsen,
M. Bernardini,
R. Bingham,
B. Biskup,
T. Bohl,
C. Bracco,
P. N. Burrows,
G. Burt,
B. Buttenschon,
A. Butterworth,
M. Cascella,
S. Chattopadhyay,
E. Chevallay,
S. Cipiccia,
H. Damerau,
L. Deacon
, et al. (96 additional authors not shown)
Abstract:
This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experi…
▽ More
This report describes the conceptual steps in reaching the design of the AWAKE experiment currently under construction at CERN. We start with an introduction to plasma wakefield acceleration and the motivation for using proton drivers. We then describe the self-modulation instability --- a key to an early realization of the concept. This is then followed by the historical development of the experimental design, where the critical issues that arose and their solutions are described. We conclude with the design of the experiment as it is being realized at CERN and some words on the future outlook. A summary of the AWAKE design and construction status as presented in this conference is given in [1].
△ Less
Submitted 29 November, 2015;
originally announced November 2015.
-
Modeling of an Electron Injector for the AWAKE Project
Authors:
O. Mete,
G. Xia,
R. Apsimon,
G. Burt,
S. Doebert,
R. Fiorito,
C. Welsch
Abstract:
Particle-in-cell simulations were performed by using PARMELA to characterise an electron injector with a booster linac for the AWAKE project in order to provide the baseline specifications required by the plasma wakefield experiments. Tolerances and errors were investigated. A 3 GHz travelling wave structure designed by using CST code. Particles were tracked by using the field maps acquired from t…
▽ More
Particle-in-cell simulations were performed by using PARMELA to characterise an electron injector with a booster linac for the AWAKE project in order to provide the baseline specifications required by the plasma wakefield experiments. Tolerances and errors were investigated. A 3 GHz travelling wave structure designed by using CST code. Particles were tracked by using the field maps acquired from these electromagnetic simulations. These results are pre- sented in comparison with the generic accelerating structure model within PARMELA.
△ Less
Submitted 11 May, 2015;
originally announced May 2015.
-
Residual Dispersion in a Combiner Ring
Authors:
Robert Apsimon,
Jakob Esberg,
Hywel Owen
Abstract:
In this paper we present a proof to show that there exists no system of linear or nonlinear optics which can simultaneously close multiple local orbit bumps and dispersion through a single beam transport region. The second combiner ring in the CLIC drive beam recombination system, CR2, is used as an example of where such conditions are necessary. We determine the properties of a lattice which is c…
▽ More
In this paper we present a proof to show that there exists no system of linear or nonlinear optics which can simultaneously close multiple local orbit bumps and dispersion through a single beam transport region. The second combiner ring in the CLIC drive beam recombination system, CR2, is used as an example of where such conditions are necessary. We determine the properties of a lattice which is capable of closing the local orbit bumps and dispersion and show that all resulting solutions are either unphysical or trivial.
△ Less
Submitted 19 April, 2015;
originally announced April 2015.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors
Authors:
U. Bravar,
M. Bogomilov,
Y. Karadzhov,
D. Kolev,
I. Russinov,
R. Tsenov,
L. Wang,
F. Y. Xu,
S. X. Zheng,
R. Bertoni,
M. Bonesini,
R. Mazza,
V. Palladino,
G. Cecchet,
A. de Bari,
M. Capponi,
A. Iaciofano,
D. Orestano,
F. Pastore,
L. Tortora,
S. Ishimoto,
S. Suzuki,
K. Yoshimura,
Y. Mori,
Y. Kuno
, et al. (123 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with…
▽ More
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.
△ Less
Submitted 30 July, 2013; v1 submitted 9 October, 2011;
originally announced October 2011.
-
Latest Beam Test Results of the FONT4 ILC Intra-train Feedback System Prototype
Authors:
P. N. Burrows,
R. Apsimon,
G. B. Christian,
C. Clarke,
B. Constance,
H. Dabiri Khah,
T. Hartin,
A. Kalinin,
C. Perry,
J. Resta Lopez,
C. Swinson
Abstract:
We present the design and preliminary results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured…
▽ More
We present the design and preliminary results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured to have a latency of approximately 140 ns.
△ Less
Submitted 4 March, 2009;
originally announced March 2009.