-
The NuMAX Long Baseline Neutrino Factory Concept
Authors:
J-P. Delahaye,
C. M. Ankenbrandt,
S. A. Bogacz,
P. Huber,
H. G. Kirk,
D. Neuffer,
M. A. Palmer,
R. Ryne,
P. V. Snopok
Abstract:
A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance…
▽ More
A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance, taking advantage of existing or proposed facilities at an existing laboratory like Fermilab. A tentative layout based on a recirculating linac providing opportunities for considerable saving is discussed as well as its possible evolution toward a muon collider if and when requested by Physics. Tentative parameters of the various stages are presented as well as the necessary R&D to address the technological issues and demonstrate their feasibility.
△ Less
Submitted 7 May, 2018; v1 submitted 19 March, 2018;
originally announced March 2018.
-
A muon collider as a Higgs factory
Authors:
D. Neuffer,
M. Palmer,
Y. Alexahin,
C. Ankenbrandt,
J. P. Delahaye
Abstract:
Because muons connect directly to a standard-model Higgs particle in s-channel production, a muon collider would be an ideal device for precision measurement of the mass and width of a Higgs-like particle, and for further exploration of its production and decay properties. Parameters of a high-precision muon collider are presented and the necessary components and performance are described. An impo…
▽ More
Because muons connect directly to a standard-model Higgs particle in s-channel production, a muon collider would be an ideal device for precision measurement of the mass and width of a Higgs-like particle, and for further exploration of its production and decay properties. Parameters of a high-precision muon collider are presented and the necessary components and performance are described. An important advantage of the muon collider approach is that the spin precession of the muons will enable energy measurements at extremely high accuracy (dE/E to 10-6 or better). The collider could be a first step toward a high-luminosity multi-TeV lepton collider, and extensions toward a higher-energy higher-luminosity device are also discussed.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
A Staged Muon Accelerator Facility For Neutrino and Collider Physics
Authors:
Jean-Pierre Delahaye,
Charles Ankenbrandt,
Stephen Brice,
Alan David Bross,
Dmitri Denisov,
Estia Eichten,
Stephen Holmes,
Ronald Lipton,
David Neuffer,
Mark Alan Palmer,
S. Alex Bogacz,
Patrick Huber,
Daniel M. Kaplan,
Pavel Snopok,
Harold G. Kirk,
Robert B. Palmer,
Robert D. Ryne
Abstract:
Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with in…
▽ More
Muon-based facilities offer unique potential to provide capabilities at both the Intensity Frontier with Neutrino Factories and the Energy Frontier with Muon Colliders. They rely on a novel technology with challenging parameters, for which the feasibility is currently being evaluated by the Muon Accelerator Program (MAP). A realistic scenario for a complementary series of staged facilities with increasing complexity and significant physics potential at each stage has been developed. It takes advantage of and leverages the capabilities already planned for Fermilab, especially the strategy for long-term improvement of the accelerator complex being initiated with the Proton Improvement Plan (PIP-II) and the Long Baseline Neutrino Facility (LBNF). Each stage is designed to provide an R&D platform to validate the technologies required for subsequent stages. The rationale and sequence of the staging process and the critical issues to be addressed at each stage, are presented.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Mu2e Technical Design Report
Authors:
L. Bartoszek,
E. Barnes,
J. P. Miller,
J. Mott,
A. Palladino,
J. Quirk,
B. L. Roberts,
J. Crnkovic,
V. Polychronakos,
V. Tishchenko,
P. Yamin,
C. -h. Cheng,
B. Echenard,
K. Flood,
D. G. Hitlin,
J. H. Kim,
T. S. Miyashita,
F. C. Porter,
M. Röhrken,
J. Trevor,
R. -Y. Zhu,
E. Heckmaier,
T. I. Kang,
G. Lim,
W. Molzon
, et al. (238 additional authors not shown)
Abstract:
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L…
▽ More
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval.
△ Less
Submitted 16 March, 2015; v1 submitted 21 January, 2015;
originally announced January 2015.
-
Numerical Studies of Optimization and Aberration Correction Methods for the Preliminary Demonstration of the Parametric Ionization Cooling (PIC) Principle in the Twin Helix Muon Cooling Channel
Authors:
J. A. Maloney,
V. S. Morozov,
Ya. S. Derbenev,
A. Afanasev,
R. P. Johnson,
C. A. Ankenbrandt,
C. Yoshikawa,
K. Yonehara,
D. Neuffer,
B. Erdelyi
Abstract:
Muon colliders have been proposed for the next generation of particle accelerators that study high-energy physics at the energy and intensity frontiers. In this paper we study a possible implementation of muon ionization cooling, Parametric-resonance Ionization Cooling (PIC), in the twin helix channel. The resonant cooling method of PIC offers the potential to reduce emittance beyond that achievab…
▽ More
Muon colliders have been proposed for the next generation of particle accelerators that study high-energy physics at the energy and intensity frontiers. In this paper we study a possible implementation of muon ionization cooling, Parametric-resonance Ionization Cooling (PIC), in the twin helix channel. The resonant cooling method of PIC offers the potential to reduce emittance beyond that achievable with ionization cooling with ordinary magnetic focusing. We examine optimization of a variety of parameters, study the nonlinear dynamics in the twin helix channel and consider possible methods of aberration correction.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
nuSTORM - Neutrinos from STORed Muons: Proposal to the Fermilab PAC
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
P. Coloma,
L. Coney,
A. Dobbs
, et al. (88 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neu…
▽ More
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neutrino-oscillation programs by providing definitive measurements of electron neutrino and muon neutrino scattering cross sections off nuclei with percent-level precision; and 3. Constitutes the crucial first step in the development of muon accelerators as a powerful new technique for particle physics. The document describes the facility in detail and demonstrates its physics capabilities. This document was submitted to the Fermilab Physics Advisory Committee in consideration for Stage I approval.
△ Less
Submitted 31 July, 2013;
originally announced August 2013.
-
Muon Collider Higgs Factory for Snowmass 2013
Authors:
Yuri Alexahin,
Charles M. Ankenbrandt,
David B. Cline,
Alexander Conway,
Mary Anne Cummings,
Vito Di Benedetto,
Estia Eichten,
Corrado Gatto,
Benjamin Grinstein,
Jack Gunion,
Tao Han,
Gail Hanson,
Christopher T. Hill,
Fedor Ignatov,
Rolland P. Johnson,
Valeri Lebedev,
Ron Lipton,
Zhen Liu,
Tom Markiewicz,
Anna Mazzacane,
Nikolai Mokhov,
Sergei Nagaitsev,
David Neuffer,
Mark Palmer,
Milind V. Purohit
, et al. (5 additional authors not shown)
Abstract:
We propose the construction of, and describe in detail, a compact Muon Collider s-channel Higgs Factory.
We propose the construction of, and describe in detail, a compact Muon Collider s-channel Higgs Factory.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Enabling Intensity and Energy Frontier Science with a Muon Accelerator Facility in the U.S.: A White Paper Submitted to the 2013 U.S. Community Summer Study of the Division of Particles and Fields of the American Physical Society
Authors:
J-P. Delahaye,
C. Ankenbrandt,
A. Bogacz,
S. Brice,
A. Bross,
D. Denisov,
E. Eichten,
P. Huber,
D. M. Kaplan,
H. Kirk,
R. Lipton,
D. Neuffer,
M. A. Palmer,
R. Palmer,
R. Ryne,
P. Snopok
Abstract:
A staged approach towards muon based facilities for Intensity and Energy Frontier science, building upon existing and proposed facilities at Fermilab, is presented. At each stage, a facility exploring new physics also provides an R&D platform to validate the technology needed for subsequent stages. The envisioned program begins with nuSTORM, a sensitive sterile neutrino search which also provides…
▽ More
A staged approach towards muon based facilities for Intensity and Energy Frontier science, building upon existing and proposed facilities at Fermilab, is presented. At each stage, a facility exploring new physics also provides an R&D platform to validate the technology needed for subsequent stages. The envisioned program begins with nuSTORM, a sensitive sterile neutrino search which also provides precision neutrino cross-section measurements while develo** the technology of using and cooling muons. A staged Neutrino Factory based upon Project X, sending beams towards the Sanford Underground Research Facility (SURF), which will house the LBNE detector, could follow for detailed exploration of neutrino properties at the Intensity Frontier, while also establishing the technology of using intense bunched muon beams. The complex could then evolve towards Muon Colliders, starting at 126 GeV with measurements of the Higgs resonance to sub-MeV precision, and continuing to multi-TeV colliders for the exploration of physics beyond the Standard Model at the Energy Frontier. An Appendix addresses specific questions raised by the Lepton Colliders subgroup of the CSS2013 Frontier Capabilities Study Group.
△ Less
Submitted 3 January, 2014; v1 submitted 2 August, 2013;
originally announced August 2013.
-
The Case for a Muon Collider Higgs Factory
Authors:
Yuri Alexahin,
Charles M. Ankenbrandt,
David B. Cline,
Alexander Conway,
Mary Anne Cummings,
Vito Di Benedetto,
Estia Eichten,
Jean-Pierre Delahaye,
Corrado Gatto,
Benjamin Grinstein,
Jack Gunion,
Tao Han,
Gail Hanson,
Christopher T. Hill,
Fedor Ignatov,
Rolland P. Johnson,
Valeri Lebedev,
Leon M. Lederman,
Ron Lipton,
Zhen Liu,
Tom Markiewicz,
Anna Mazzacane,
Nikolai Mokhov,
Sergei Nagaitsev,
David Neuffer
, et al. (8 additional authors not shown)
Abstract:
We propose the construction of a compact Muon Collider Higgs Factory. Such a machine can produce up to \sim 14,000 at 8\times 10^{31} cm^-2 sec^-1 clean Higgs events per year, enabling the most precise possible measurement of the mass, width and Higgs-Yukawa coupling constants.
We propose the construction of a compact Muon Collider Higgs Factory. Such a machine can produce up to \sim 14,000 at 8\times 10^{31} cm^-2 sec^-1 clean Higgs events per year, enabling the most precise possible measurement of the mass, width and Higgs-Yukawa coupling constants.
△ Less
Submitted 23 July, 2013;
originally announced July 2013.
-
Project X: Physics Opportunities
Authors:
Andreas S. Kronfeld,
Robert S. Tschirhart,
Usama Al-Binni,
Wolfgang Altmannshofer,
Charles Ankenbrandt,
Kaladi Babu,
Sunanda Banerjee,
Matthew Bass,
Brian Batell,
David V. Baxter,
Zurab Berezhiani,
Marc Bergevin,
Robert Bernstein,
Sudeb Bhattacharya,
Mary Bishai,
Thomas Blum,
S. Alex Bogacz,
Stephen J. Brice,
Joachim Brod,
Alan Bross,
Michael Buchoff,
Thomas W. Burgess,
Marcela Carena,
Luis A. Castellanos,
Subhasis Chattopadhyay
, et al. (111 additional authors not shown)
Abstract:
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, had…
▽ More
Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, hadron structure, hadron spectroscopy, and lattice-QCD calculations. Part 1 is available as arXiv:1306.5022 [physics.acc-ph] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph].
△ Less
Submitted 1 October, 2016; v1 submitted 20 June, 2013;
originally announced June 2013.
-
Neutrinos from Stored Muons nuSTORM: Expression of Interest
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
L. Coney,
A. Dobbs,
J. Dobson
, et al. (84 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sect…
▽ More
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sections with percent-level precision; allow searches for sterile neutrinos of exquisite sensitivity to be carried out; and constitute the essential first step in the incremental development of muon accelerators as a powerful new technique for particle physics.
Of the world's proton-accelerator laboratories, only CERN and FNAL have the infrastructure required to mount nuSTORM. Since no siting decision has yet been taken, the purpose of this Expression of Interest (EoI) is to request the resources required to: investigate in detail how nuSTORM could be implemented at CERN; and develop options for decisive European contributions to the nuSTORM facility and experimental programme wherever the facility is sited.
The EoI defines a two-year programme culminating in the delivery of a Technical Design Report.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
Mu2e Conceptual Design Report
Authors:
The Mu2e Project,
Collaboration,
:,
R. J. Abrams,
D. Alezander,
G. Ambrosio,
N. Andreev,
C. M. Ankenbrandt,
D. M. Asner,
D. Arnold,
A. Artikov,
E. Barnes,
L. Bartoszek,
R. H. Bernstein,
K. Biery,
V. Biliyar,
R. Bonicalzi,
R. Bossert,
M. Bowden,
J. Brandt,
D. N. Brown,
J. Budagov,
M. Buehler,
A. Burov,
R. Carcagno
, et al. (203 additional authors not shown)
Abstract:
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe…
▽ More
Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012.
△ Less
Submitted 29 November, 2012;
originally announced November 2012.
-
nuSTORM: Neutrinos from STORed Muons
Authors:
P. Kyberd,
D. R. Smith,
L. Coney,
S. Pascoli,
C. Ankenbrandt,
S. J. Brice,
A. D. Bross,
H. Cease,
J. Kopp,
N. Mokhov,
J. Morfin,
D. Neuffer,
M. Popovic,
P. Rubinov,
S. Striganov,
A. Blondel,
A. Bravar,
E. Noah,
R. Bayes,
F. J. P. Soler,
A. Dobbs,
K. Long,
J. Pasternak,
E. Santos,
M. O. Wascko
, et al. (13 additional authors not shown)
Abstract:
The results of LSND and MiniBooNE, along with the recent papers on a possible reactor neutrino flux anomaly give tantalizing hints of new physics. Models beyond the neutrino-SM have been developed to explain these results and involve one or more additional neutrinos that are non-interacting or "sterile." Neutrino beams produced from the decay of muons in a racetrack-like decay ring provide a power…
▽ More
The results of LSND and MiniBooNE, along with the recent papers on a possible reactor neutrino flux anomaly give tantalizing hints of new physics. Models beyond the neutrino-SM have been developed to explain these results and involve one or more additional neutrinos that are non-interacting or "sterile." Neutrino beams produced from the decay of muons in a racetrack-like decay ring provide a powerful way to study this potential new physics. In this Letter of Intent, we describe a facility, nuSTORM, "Neutrinos from STORed Muons," and an appropriate far detector for neutrino oscillation searches at short baseline. We present sensitivity plots that indicated that this experimental approach can provide over 10 sigma confirmation or rejection of the LSND/MinBooNE results. In addition we indicate how the facility can be used to make precision neutrino interaction cross section measurements important to the next generation of long-baseline neutrino oscillation experiments.
△ Less
Submitted 1 June, 2012;
originally announced June 2012.
-
Using the Fermilab Proton Source for a Muon to Electron Conversion Experiment
Authors:
C. Ankenbrandt,
D. Bogert,
F. DeJongh,
S. Geer,
D. McGinnis,
D. Neuffer,
M. Popovic,
E. Prebys
Abstract:
The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the e…
▽ More
The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the existing sensitivity by three orders of magnitude. We describe a scheme for the required beam manipulations. The scheme uses the Accumulator for momentum stacking, and the Debuncher for bunching and slow extraction. This would permit simultaneous operation of the muon program with the future NuMI program, delivering 10^20 protons per year at 8 GeV for the muon program at the cost of a modest (~10%) reduction in the protons available to the neutrino program.
△ Less
Submitted 13 November, 2006;
originally announced November 2006.
-
Beam-Based Determination of the Offset of Booster gamma-T Quads
Authors:
Xi Yang,
Charles M. Ankenbrandt,
James MacLachlan
Abstract:
Twelve pulsed gamma-T quads have been installed in the Booster to provide fast transition crossing. The less time the beam stays in the non-adiabatic period near transition, the less the longitudinal emittance grows. From the past experience, the gamma-T quads are not well aligned relative to the usual closed orbit. Quad steering can cause beam loss and a dispersion wave after transition. To mak…
▽ More
Twelve pulsed gamma-T quads have been installed in the Booster to provide fast transition crossing. The less time the beam stays in the non-adiabatic period near transition, the less the longitudinal emittance grows. From the past experience, the gamma-T quads are not well aligned relative to the usual closed orbit. Quad steering can cause beam loss and a dispersion wave after transition. To make the gamma-T quads routinely operational, procedures for finding the center of the beam relative to the quads and centering the beam through all of them are very important. A program, which uses the difference in the closed orbits when gamma-T quads are on and off and calculates the offsets of the beam relative to gamma-T quads, has been developed and tested. A radial orbit offset (ROF) of about 3 mm has been experimentally determined to be nearly the optimal radial position for centering the beam through all the gamma-T quads, thereby eliminating the immediate need for repositioning the quads.
△ Less
Submitted 6 January, 2005;
originally announced January 2005.
-
Reshape of the Bunch-by-bunch BPM Signal to a Turn-by-turn Matrix during the Fast RF Frequency-swee** Time in Booster
Authors:
Xi Yang,
Charles M. Ankenbrandt,
James Lackey,
Vic Scarpine
Abstract:
The bunch-by-bunch BPM signal array has to be reshaped into a turn-by-turn (TBT) matrix in order to make the TBT beam position information of a single bunch available for further data analysis, such as via the Fourier transform to obtain the synchrotron tune and betatron tune, etc. Since the RF frequency sweeps more than 10 MHz in the first 8 ms of a Booster cycle, the revolution time decreases…
▽ More
The bunch-by-bunch BPM signal array has to be reshaped into a turn-by-turn (TBT) matrix in order to make the TBT beam position information of a single bunch available for further data analysis, such as via the Fourier transform to obtain the synchrotron tune and betatron tune, etc. Since the RF frequency sweeps more than 10 MHz in the first 8 ms of a Booster cycle, the revolution time decreases more than 20%. The number of data points for each Booster turn (BT) should be varied in the same pace with the revolution time since the sampling rate of a digital oscilloscope is usually fixed. And this can be done by pre-determining the relationship between the RF frequency and the time in a cycle via the curve fit.
△ Less
Submitted 6 January, 2005;
originally announced January 2005.
-
Booster 6-GeV Study
Authors:
Xi Yang,
Charles M. Ankenbrandt,
William A. Pellico,
James Lackey,
Rene Padilla,
J. Norem
Abstract:
Since a wider aperture has been obtained along the Booster beam line, this opens the opportunity for Booster running a higher intensity beam than ever before. Sooner or later, the available RF accelerating voltage will become a new limit for the beam intensity. Either by increasing the RFSUM or by reducing the accelerating rate can achieve the similar goal. The motivation for the 6-GeV study is…
▽ More
Since a wider aperture has been obtained along the Booster beam line, this opens the opportunity for Booster running a higher intensity beam than ever before. Sooner or later, the available RF accelerating voltage will become a new limit for the beam intensity. Either by increasing the RFSUM or by reducing the accelerating rate can achieve the similar goal. The motivation for the 6-GeV study is to gain the relative accelerating voltage via a slower acceleration.
△ Less
Submitted 6 January, 2005;
originally announced January 2005.
-
Study Report of the Booster Transition Jump System
Authors:
Xi Yang,
Charles M. Ankenbrandt,
William A. Pellico,
James Lackey
Abstract:
There are more than 15 years since the transition-jump system (TJS) was installed. Because of the quad steering, which is caused by the beam not being well centered through all the gamma-T quads, the TJS has never been used in the operation. Based upon the recent calculation, the short 12 gamma-T quad had the worst offset in the vertical direction, and it was lowered 4 mm. Afterwards, the orbit…
▽ More
There are more than 15 years since the transition-jump system (TJS) was installed. Because of the quad steering, which is caused by the beam not being well centered through all the gamma-T quads, the TJS has never been used in the operation. Based upon the recent calculation, the short 12 gamma-T quad had the worst offset in the vertical direction, and it was lowered 4 mm. Afterwards, the orbit error caused by the gamma-T quad steering has been largely removed, and this encourages our efforts of commissioning the TJS to reach its design goal.
△ Less
Submitted 24 January, 2005; v1 submitted 6 January, 2005;
originally announced January 2005.
-
Experimental Estimate of Beam Loading and Minimum rf Voltage for Acceleration of High Intensity Beam in the Fermilab Booster
Authors:
Xi Yang,
C. Ankenbrandt,
J. Norem
Abstract:
The difference between the rf voltage seen by the beam and the accelerating voltage required to match the rate of change of the Booster magnetic field is used to estimate the energy loss per beam turn. Because the rf voltage (RFSUM) and the synchronous phase can be experimentally measured, they can be used to calculate the effective accelerating voltage. Also an RFSUM reduction technique has bee…
▽ More
The difference between the rf voltage seen by the beam and the accelerating voltage required to match the rate of change of the Booster magnetic field is used to estimate the energy loss per beam turn. Because the rf voltage (RFSUM) and the synchronous phase can be experimentally measured, they can be used to calculate the effective accelerating voltage. Also an RFSUM reduction technique has been applied to measure experimentally the RFSUM limit at which the beam loss starts. With information on beam energy loss, the running conditions, especially for the high intensity beam, can be optimized in order to achieve a higher intensity beam from the Fermilab Booster.
△ Less
Submitted 12 July, 2004;
originally announced July 2004.
-
RF Bucket Reduction as an Experimental Tool for Beam Diagnostics and Manipulation
Authors:
Xi Yang,
C. Ankenbrandt
Abstract:
A technique using RF bucket reduction for acquiring information about the particle distribution in longitudinal phase space has been applied in the Fermilab Booster. Data sets were obtained at six important time intervals of a Booster cycle for three different beam intensities. Controlled RF bucket reduction also provides other opportunities for beam manipulation.
A technique using RF bucket reduction for acquiring information about the particle distribution in longitudinal phase space has been applied in the Fermilab Booster. Data sets were obtained at six important time intervals of a Booster cycle for three different beam intensities. Controlled RF bucket reduction also provides other opportunities for beam manipulation.
△ Less
Submitted 12 July, 2004;
originally announced July 2004.
-
Booster Synchrotron Frequency Below Transition
Authors:
Xi Yang,
James MacLachlan,
Rene Padilla,
C. Ankenbrandt
Abstract:
The dipole mode synchrotron frequency is a basic beam parameter; it and a few similarly basic quantities measured at small time intervals serve to characterize the longitudinal beam dynamics throughout the acceleration cycle. The effective accelerating voltage, in conjunction with the amount of rf voltage required for the acceleration, is important for the estimate of the beam energy loss per tu…
▽ More
The dipole mode synchrotron frequency is a basic beam parameter; it and a few similarly basic quantities measured at small time intervals serve to characterize the longitudinal beam dynamics throughout the acceleration cycle. The effective accelerating voltage, in conjunction with the amount of rf voltage required for the acceleration, is important for the estimate of the beam energy loss per turn. The dipole mode frequency can be used to obtain the effective accelerating rf voltage, providing that it can be measured precisely. The synchrotron frequency measured from the synchrotron phase detector signal (SPD) generally agrees well with calculation, and it can be applied for such purposes as inferring the effective rf voltage.
△ Less
Submitted 12 July, 2004;
originally announced July 2004.
-
Measurement of gamma-T with the gamma-T Quads On and Off
Authors:
Xi Yang,
James MacLachlan,
Charles M. Ankenbrandt
Abstract:
An experimental procedure for measuring gamma-T has been developed and tested in two different measurements, with the gamma-T quads on and off. The results were compared to MAD calculations. The discrepancy between the measured gamma-T and the calculated gamma-T is less than 5%.
An experimental procedure for measuring gamma-T has been developed and tested in two different measurements, with the gamma-T quads on and off. The results were compared to MAD calculations. The discrepancy between the measured gamma-T and the calculated gamma-T is less than 5%.
△ Less
Submitted 26 January, 2005; v1 submitted 12 July, 2004;
originally announced July 2004.
-
Status of Muon Collider Research and Development and Future Plans
Authors:
Charles M. Ankenbrandt
Abstract:
The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on t…
▽ More
The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($π\to μν_μ$) channel, muon cooling, acceleration, storage in a collider ring and the collider detector. We also present theoretical and experimental R & D plans for the next several years that should lead to a better understanding of the design and feasibility issues for all of the components. This report is an update of the progress on the R & D since the Feasibility Study of Muon Colliders presented at the Snowmass'96 Workshop [R. B. Palmer, A. Sessler and A. Tollestrup, Proceedings of the 1996 DPF/DPB Summer Study on High-Energy Physics (Stanford Linear Accelerator Center, Menlo Park, CA, 1997)].
△ Less
Submitted 15 January, 1999;
originally announced January 1999.
