-
Representation of incomplete contact problems by half-planes
Authors:
Hendrik Andresen,
David A. Hills,
Matthew R. Moore
Abstract:
Methods for finding the optimal choices of the applied remote loads -- the applied normal force, moment, shear force and remote bulk stresses -- needed to solve frictional contact problems in partial-slip using half-plane theory are derived by using data from contacts analysed by the finite element method. While the normal and shear forces and moment are readily found from equilibrium consideratio…
▽ More
Methods for finding the optimal choices of the applied remote loads -- the applied normal force, moment, shear force and remote bulk stresses -- needed to solve frictional contact problems in partial-slip using half-plane theory are derived by using data from contacts analysed by the finite element method. While the normal and shear forces and moment are readily found from equilibrium considerations, in order to determine the bulk stresses we must exploit details of the traction ratio and the direct strain within the contact, both of which are readily extracted from simulations. These contact loads enable the formulation of an equivalent half-plane problem for the contact, which can be used to determine much more precise estimates of the slip-zone sizes than are obtainable from direct use of frictional finite element analysis, as aggregated data from the finite element output is employed, and the half-plane analysis will add precision in terms of satisfaction of the laws of frictional slip and stick.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
Explicit and asymptotic solutions for frictional incomplete half-plane contacts subject to general oscillatory loading in the steady-state
Authors:
Hendrik Andresen,
Rodolfo M. N. Fleury,
Matthew R. Moore,
David A. Hills
Abstract:
This contribution presents an asymptotic formulation for the stick-slip behaviour of incomplete contacts under oscillatory variation of normal load, moment, shear load and differential bulk tension. The asymptotic description allows us not only to approximate the size of the slip zones during the steady-state of a cyclic problem without knowledge of the geometry or contact law, but provides a solu…
▽ More
This contribution presents an asymptotic formulation for the stick-slip behaviour of incomplete contacts under oscillatory variation of normal load, moment, shear load and differential bulk tension. The asymptotic description allows us not only to approximate the size of the slip zones during the steady-state of a cyclic problem without knowledge of the geometry or contact law, but provides a solution when all known analytical solutions for incomplete contacts reach their limitations, that is, in the presence of a varying moment and a differential bulk tension large enough to reverse the direction of slip at one end of the contact. An insightful comparison between the mathematically explicit analytical solution and the asymptotic approach is drawn using the example geometry of a shallow wedge.
△ Less
Submitted 26 March, 2021;
originally announced March 2021.
-
A review of partial slip solutions for contacts represented by half-planes including bulk tension and moments
Authors:
Hendrik Andresen,
David Hills
Abstract:
Solution procedures for establishing the regimes of stick and slip for frictional contacts capable of idealisation within the framework of half-plane elasticity and subject to complex loading regimes are reviewed, starting with the well known fundamental problems and going on to more complicated ones. These include problems where the normal load, shear force, applied moment and differential remote…
▽ More
Solution procedures for establishing the regimes of stick and slip for frictional contacts capable of idealisation within the framework of half-plane elasticity and subject to complex loading regimes are reviewed, starting with the well known fundamental problems and going on to more complicated ones. These include problems where the normal load, shear force, applied moment and differential remote tensions all vary with time. Transient and steady state solutions are discussed.
△ Less
Submitted 7 November, 2019;
originally announced November 2019.
-
Frictional half-plane contact problems subject to alternating normal and shear loads and tension in the steady state
Authors:
Hendrik Andresen,
David A. Hills,
James R. Barber,
Jesus Vazquez
Abstract:
The problem of a general, symmetric contact, between elastically similar bodies, and capable of idealisation using half-plane theory, is studied in the presence of interfacial friction. It is subject to a constant set of loads - normal force, shear force and bulk tension parallel with the interface - together with an oscillatory set of the same quantities, and is in the steady state. Partial slip…
▽ More
The problem of a general, symmetric contact, between elastically similar bodies, and capable of idealisation using half-plane theory, is studied in the presence of interfacial friction. It is subject to a constant set of loads - normal force, shear force and bulk tension parallel with the interface - together with an oscillatory set of the same quantities, and is in the steady state. Partial slip conditions are expected to ensue for a range of these quantities, and the permanent stick zone is explicitly established, thereby effectively specifying the maximum extent of the slip zones. Exact and approximate, easy to apply recipes are obtained.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Closed-form solutions for tilted three-part piecewise-quadratic half-plane contacts
Authors:
Hendrik Andresen,
David A. Hills,
Jesus Vazquez
Abstract:
A general half-plane contact problem in which the geometry is specified in a piecewise-quadratic sense over three segments is solved in closed form. This includes the effects of a moment applied sufficient to introduce separation of one segment and the application of a shearing force sufficient or insufficient to cause sliding. Extending existing solutions to asymmetrical problems is necessary in…
▽ More
A general half-plane contact problem in which the geometry is specified in a piecewise-quadratic sense over three segments is solved in closed form. This includes the effects of a moment applied sufficient to introduce separation of one segment and the application of a shearing force sufficient or insufficient to cause sliding. Extending existing solutions to asymmetrical problems is necessary in order to broaden our understanding of the behaviour of dovetail roots of gas turbine fan blades. In previous studies symmetrical contacts have often been used to represent a dovetail flank contact. In the asymmetrical case, the contact pressure may be considerably higher at one of the contact edges compared to the corresponding symmetrical case. Exploiting the generality provided with the solution presented in this study, several simpler indenter problems are investigated making use of an algebraic manipulator. The Mathematica code is made available for download.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Inverse scattering of 2d photonic structures by layer-strip**
Authors:
Marte P. Hatlo Andresen,
Harald E. Krogstad,
Johannes Skaar
Abstract:
Design and reconstruction of 2d and 3d photonic structures are usually carried out by forward simulations combined with optimization or intuition. Reconstruction by means of layer-strip** has been applied in seismic processing as well as in design and characterization of 1d photonic structures such as fiber Bragg gratings. Layer-strip** is based on causality, where the earliest scattered light…
▽ More
Design and reconstruction of 2d and 3d photonic structures are usually carried out by forward simulations combined with optimization or intuition. Reconstruction by means of layer-strip** has been applied in seismic processing as well as in design and characterization of 1d photonic structures such as fiber Bragg gratings. Layer-strip** is based on causality, where the earliest scattered light is used to recover the structure layer-by-layer.
Our set-up is a 2d layered nonmagnetic structure probed by plane polarized harmonic waves entering normal to the layers. It is assumed that the dielectric permittivity in each layer only varies orthogonal to the polarization. Based on obtained reflectance data covering a suitable frequency interval, time-localized pulse data are synthesized and applied to reconstruct the refractive index profile in the leftmost layer by identifying the local, time-domain Fresnel reflection at each point. Once the first layer is known, its impact on the reflectance data is stripped off, and the procedure repeated for the next layer.
Through numerical simulations it will be demonstrated that it is possible to reconstruct structures consisting of several layers. The impact of evanescent modes and limited bandwidth is discussed.
△ Less
Submitted 2 February, 2011;
originally announced February 2011.
-
The effect of gain saturation in a gain compensated perfect lens
Authors:
Marte P. Hatlo Andresen,
Aleksander V. Skaldebø,
Magnus W. Haakestad,
Harald E. Krogstad,
Johannes Skaar
Abstract:
The transmission of evanescent waves in a gain-compensated perfect lens is discussed. In particular, the impact of gain saturation is included in the analysis, and a method for calculating the fields of such nonlinear systems is developed. Gain compensation clearly improves the resolution; however, a number of nonideal effects arise as a result of gain saturation. The resolution associated with th…
▽ More
The transmission of evanescent waves in a gain-compensated perfect lens is discussed. In particular, the impact of gain saturation is included in the analysis, and a method for calculating the fields of such nonlinear systems is developed. Gain compensation clearly improves the resolution; however, a number of nonideal effects arise as a result of gain saturation. The resolution associated with the lens is strongly dependent on the saturation constant of the active medium.
△ Less
Submitted 15 July, 2010;
originally announced July 2010.