-
The LHCb ultra-fast simulation option, Lamarr: design and validation
Authors:
Lucio Anderlini,
Matteo Barbetti,
Simone Capelli,
Gloria Corti,
Adam Davis,
Denis Derkach,
Nikita Kazeev,
Artem Maevskiy,
Maurizio Martinelli,
Sergei Mokonenko,
Benedetto Gianluca Siddi,
Zehua Xu
Abstract:
Detailed detector simulation is the major consumer of CPU resources at LHCb, having used more than 90% of the total computing budget during Run 2 of the Large Hadron Collider at CERN. As data is collected by the upgraded LHCb detector during Run 3 of the LHC, larger requests for simulated data samples are necessary, and will far exceed the pledged resources of the experiment, even with existing fa…
▽ More
Detailed detector simulation is the major consumer of CPU resources at LHCb, having used more than 90% of the total computing budget during Run 2 of the Large Hadron Collider at CERN. As data is collected by the upgraded LHCb detector during Run 3 of the LHC, larger requests for simulated data samples are necessary, and will far exceed the pledged resources of the experiment, even with existing fast simulation options. An evolution of technologies and techniques to produce simulated samples is mandatory to meet the upcoming needs of analysis to interpret signal versus background and measure efficiencies. In this context, we propose Lamarr, a Gaudi-based framework designed to offer the fastest solution for the simulation of the LHCb detector. Lamarr consists of a pipeline of modules parameterizing both the detector response and the reconstruction algorithms of the LHCb experiment. Most of the parameterizations are made of Deep Generative Models and Gradient Boosted Decision Trees trained on simulated samples or alternatively, where possible, on real data. Embedding Lamarr in the general LHCb Gauss Simulation framework allows combining its execution with any of the available generators in a seamless way. Lamarr has been validated by comparing key reconstructed quantities with Detailed Simulation. Good agreement of the simulated distributions is obtained with two-order-of-magnitude speed-up of the simulation phase.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Hyperparameter Optimization as a Service on INFN Cloud
Authors:
Matteo Barbetti,
Lucio Anderlini
Abstract:
The simplest and often most effective way of parallelizing the training of complex machine learning models is to execute several training instances on multiple machines, possibly scanning the hyperparameter space to optimize the underlying statistical model and the learning procedure. Often, such a meta learning procedure is limited by the ability of accessing securely a common database organizing…
▽ More
The simplest and often most effective way of parallelizing the training of complex machine learning models is to execute several training instances on multiple machines, possibly scanning the hyperparameter space to optimize the underlying statistical model and the learning procedure. Often, such a meta learning procedure is limited by the ability of accessing securely a common database organizing the knowledge of the previous and ongoing trials. Exploiting opportunistic GPUs provided in different environments represents a further challenge when designing such optimization campaigns. In this contribution we discuss how a set of RestAPIs can be used to access a dedicated service based on INFN Cloud to monitor and possibly coordinate multiple training instances, with gradient-less optimization techniques, via simple HTTP requests. The service, named Hopaas (Hyperparameter OPtimization As A Service), is made of web interface and sets of APIs implemented with a FastAPI back-end running through Uvicorn and NGINX in a virtual instance of INFN Cloud. The optimization algorithms are currently based on Bayesian techniques as provided by Optuna. A Python front-end is also made available for quick prototy**. We present applications to hyperparameter optimization campaigns performed combining private, INFN Cloud and CINECA resources.
△ Less
Submitted 17 February, 2023; v1 submitted 13 January, 2023;
originally announced January 2023.
-
Towards Reliable Neural Generative Modeling of Detectors
Authors:
Lucio Anderlini,
Matteo Barbetti,
Denis Derkach,
Nikita Kazeev,
Artem Maevskiy,
Sergei Mokhnenko
Abstract:
The increasing luminosities of future data taking at Large Hadron Collider and next generation collider experiments require an unprecedented amount of simulated events to be produced. Such large scale productions demand a significant amount of valuable computing resources. This brings a demand to use new approaches to event generation and simulation of detector responses. In this paper, we discuss…
▽ More
The increasing luminosities of future data taking at Large Hadron Collider and next generation collider experiments require an unprecedented amount of simulated events to be produced. Such large scale productions demand a significant amount of valuable computing resources. This brings a demand to use new approaches to event generation and simulation of detector responses. In this paper, we discuss the application of generative adversarial networks (GANs) to the simulation of the LHCb experiment events. We emphasize main pitfalls in the application of GANs and study the systematic effects in detail. The presented results are based on the Geant4 simulation of the LHCb Cherenkov detector.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Machine Learning for the LHCb Simulation
Authors:
Lucio Anderlini
Abstract:
Most of the computing resources pledged to the LHCb experiment at CERN are necessary to the production of simulated samples used to predict resolution functions on the reconstructed quantities and the reconstruction and selection efficiency. Projecting the Simulation requests to the years following the upcoming LHCb Upgrade, the relative computing resources would exceed the pledges by more than a…
▽ More
Most of the computing resources pledged to the LHCb experiment at CERN are necessary to the production of simulated samples used to predict resolution functions on the reconstructed quantities and the reconstruction and selection efficiency. Projecting the Simulation requests to the years following the upcoming LHCb Upgrade, the relative computing resources would exceed the pledges by more than a factor of 2. In this contribution, I discuss how Machine Learning can help to speed up the Detector Simulation for the upcoming Runs of the LHCb experiment.
△ Less
Submitted 5 January, 2022; v1 submitted 15 October, 2021;
originally announced October 2021.
-
Muon identification for LHCb Run 3
Authors:
Lucio Anderlini,
Flavio Archilli,
Alessandro Cardini,
Violetta Cogoni,
Marianna Fontana,
Giacomo Graziani,
Nikita Kazeev,
Hilbrand Kuindersma,
Rolf Oldeman,
Matteo Palutan,
Marco Santimaria,
Barbara Sciascia,
Patrizia De Simone,
Ricardo Vazquez Gomez
Abstract:
Muon identification is of paramount importance for the physics programme of LHCb. In the upgrade phase, starting from Run 3 of the LHC, the trigger of the experiment will be solely based on software. The luminosity increase to $2\times10^{33}$ cm$^{-2}$s$^{-1}$ will require an improvement of the muon identification criteria, aiming at performances equal or better than those of Run 2, but in a much…
▽ More
Muon identification is of paramount importance for the physics programme of LHCb. In the upgrade phase, starting from Run 3 of the LHC, the trigger of the experiment will be solely based on software. The luminosity increase to $2\times10^{33}$ cm$^{-2}$s$^{-1}$ will require an improvement of the muon identification criteria, aiming at performances equal or better than those of Run 2, but in a much more challenging environment. In this paper, two new muon identification algorithms developed in view of the LHCb upgrade are presented, and their performance in terms of signal efficiency versus background reduction is shown.
△ Less
Submitted 14 December, 2020; v1 submitted 4 August, 2020;
originally announced August 2020.
-
Intrinsic time resolution of 3D-trench silicon pixels for charged particle detection
Authors:
Lucio Anderlini,
Mauro Aresti,
Andrea Bizzeti,
Maurizio Boscardin,
Alessandro Cardini,
Gian-Franco Dalla Betta,
Marco Ferrero,
Giulio Forcolin,
Michela Garau,
Adriano Lai,
Andrea Lampis,
Angelo Loi,
Chiara Lucarelli,
Roberto Mendicino,
Roberto Mulargia,
Margherita Obertino,
Enrico Robutti,
Sabina Ronchin,
Marta Ruspa,
Stefania Vecchi
Abstract:
In the last years, high-resolution time tagging has emerged as the tool to tackle the problem of high-track density in the detectors of the next generation of experiments at particle colliders. Time resolutions below 50ps and event average repetition rates of tens of MHz on sensor pixels having a pitch of 50$μ$m are typical minimum requirements. This poses an important scientific and technological…
▽ More
In the last years, high-resolution time tagging has emerged as the tool to tackle the problem of high-track density in the detectors of the next generation of experiments at particle colliders. Time resolutions below 50ps and event average repetition rates of tens of MHz on sensor pixels having a pitch of 50$μ$m are typical minimum requirements. This poses an important scientific and technological challenge on the development of particle sensors and processing electronics. The TIMESPOT initiative (which stands for TIME and SPace real-time Operating Tracker) aims at the development of a full prototype detection system suitable for the particle trackers of the next-to-come particle physics experiments. This paper describes the results obtained on the first batch of TIMESPOT silicon sensors, based on a novel 3D MEMS (micro electro-mechanical systems) design. Following this approach, the performance of other ongoing silicon sensor developments has been matched and overcome, while using a technology which is known to be robust against radiation degradation. A time resolution of the order of 20ps has been measured at room temperature suggesting also possible improvements after further optimisations of the front-end electronics processing stage.
△ Less
Submitted 29 July, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
Long-term Operation of the Multi-Wire-Proportional-Chambers of the LHCb Muon System
Authors:
F. P. Albicocco,
L. Anderlini,
M. Anelli,
F. Archilli,
G. Auriemma,
W. Baldini,
G. Bencivenni,
N. Bondar,
B. Bochin,
D. Brundu,
S. Cadeddu,
P. Campana,
G. Carboni,
A. Cardini,
M. Carletti,
L. Casu,
A. Chubykin,
P. Ciambrone,
E. Dané,
P. De Simone,
M. Fontana,
P. Fresch,
M. Gatta,
G. Gavrilov,
S. Gets
, et al. (33 additional authors not shown)
Abstract:
The muon detector of LHCb, which comprises 1368 multi-wire-proportional-chambers (MWPC) for a total area of 435 m2, is the largest instrument of its kind exposed to such a high-radiation environment. In nine years of operation, from 2010 until 2018, we did not observe appreciable signs of ageing of the detector in terms of reduced performance. However, during such a long period, many chamber gas g…
▽ More
The muon detector of LHCb, which comprises 1368 multi-wire-proportional-chambers (MWPC) for a total area of 435 m2, is the largest instrument of its kind exposed to such a high-radiation environment. In nine years of operation, from 2010 until 2018, we did not observe appreciable signs of ageing of the detector in terms of reduced performance. However, during such a long period, many chamber gas gaps suffered from HV trips. Most of the trips were due to Malter-like effects, characterised by the appearance of local self-sustained high currents, presumably originating from impurities induced during chamber production. Very effective, though long, recovery procedures were implemented with a HV training of the gaps in situ while taking data. The training allowed most of the affected chambers to be returned to their full functionality and the muon detector efficiency to be kept close to 100%. The possibility of making the recovery faster and even more effective by adding a small percentage of oxygen in the gas mixture has been studied and successfully tested.
△ Less
Submitted 20 May, 2021; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Fast Data-Driven Simulation of Cherenkov Detectors Using Generative Adversarial Networks
Authors:
Artem Maevskiy,
Denis Derkach,
Nikita Kazeev,
Andrey Ustyuzhanin,
Maksim Artemev,
Lucio Anderlini
Abstract:
The increasing luminosities of future Large Hadron Collider runs and next generation of collider experiments will require an unprecedented amount of simulated events to be produced. Such large scale productions are extremely demanding in terms of computing resources. Thus new approaches to event generation and simulation of detector responses are needed. In LHCb, the accurate simulation of Cherenk…
▽ More
The increasing luminosities of future Large Hadron Collider runs and next generation of collider experiments will require an unprecedented amount of simulated events to be produced. Such large scale productions are extremely demanding in terms of computing resources. Thus new approaches to event generation and simulation of detector responses are needed. In LHCb, the accurate simulation of Cherenkov detectors takes a sizeable fraction of CPU time. An alternative approach is described here, when one generates high-level reconstructed observables using a generative neural network to bypass low level details. This network is trained to reproduce the particle species likelihood function values based on the track kinematic parameters and detector occupancy. The fast simulation is trained using real data samples collected by LHCb during run 2. We demonstrate that this approach provides high-fidelity results.
△ Less
Submitted 26 September, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Design and performance of the LHCb trigger and full real-time reconstruction in Run 2 of the LHC
Authors:
R. Aaij,
S. Akar,
J. Albrecht,
M. Alexander,
A. Alfonso Albero,
S. Amerio,
L. Anderlini,
P. d'Argent,
A. Baranov,
W. Barter,
S. Benson,
D. Bobulska,
T. Boettcher,
S. Borghi,
E. E. Bowen,
L. Brarda,
C. Burr,
J. -P. Cachemiche,
M. Calvo Gomez,
M. Cattaneo,
H. Chanal,
M. Chapman,
M. Chebbi,
M. Chefdeville,
P. Ciambrone
, et al. (116 additional authors not shown)
Abstract:
The LHCb collaboration has redesigned its trigger to enable the full offline detector reconstruction to be performed in real time. Together with the real-time alignment and calibration of the detector, and a software infrastructure to make persistent the high-level physics objects produced during real-time processing, this redesign enabled the widespread deployment of real-time analysis during Run…
▽ More
The LHCb collaboration has redesigned its trigger to enable the full offline detector reconstruction to be performed in real time. Together with the real-time alignment and calibration of the detector, and a software infrastructure to make persistent the high-level physics objects produced during real-time processing, this redesign enabled the widespread deployment of real-time analysis during Run 2. We describe the design of the Run 2 trigger and real-time reconstruction, and present data-driven performance measurements for a representative sample of LHCb's physics programme.
△ Less
Submitted 25 June, 2019; v1 submitted 27 December, 2018;
originally announced December 2018.
-
Tesla : an application for real-time data analysis in High Energy Physics
Authors:
R. Aaij,
S. Amato,
L. Anderlini,
S. Benson,
M. Cattaneo,
M. Clemencic,
B. Couturier,
M. Frank,
V. V. Gligorov,
T. Head,
C. Jones,
I. Komarov,
O. Lupton,
R. Matev,
G. Raven,
B. Sciascia,
T. Skwarnicki,
P. Spradlin,
S. Stahl,
B. Storaci,
M. Vesterinen
Abstract:
Upgrades to the LHCb computing infrastructure in the first long shutdown of the LHC have allowed for high quality decay information to be calculated by the software trigger making a separate offline event reconstruction unnecessary. Furthermore, the storage space of the triggered candidate is an order of magnitude smaller than the entire raw event that would otherwise need to be persisted. Tesla,…
▽ More
Upgrades to the LHCb computing infrastructure in the first long shutdown of the LHC have allowed for high quality decay information to be calculated by the software trigger making a separate offline event reconstruction unnecessary. Furthermore, the storage space of the triggered candidate is an order of magnitude smaller than the entire raw event that would otherwise need to be persisted. Tesla, following the LHCb renowned physicist naming convention, is an application designed to process the information calculated by the trigger, with the resulting output used to directly perform physics measurements.
△ Less
Submitted 19 April, 2016;
originally announced April 2016.
-
Measurement of the front-end dead-time of the LHCb muon detector and evaluation of its contribution to the muon detection inefficiency
Authors:
L. Anderlini,
M. Anelli,
F. Archilli,
G. Auriemma,
W. Baldini,
G. Bencivenni,
A. Bizzeti,
V. Bocci,
N. Bondar,
W. Bonivento,
B. Bochin,
C. Bozzi,
D. Brundu,
S. Cadeddu,
P. Campana,
G. Carboni,
A. Cardini,
M. Carletti,
L. Casu,
A. Chubykin,
P. Ciambrone,
E. Dané,
P. De Simone,
A. Falabella,
G. Felici
, et al. (39 additional authors not shown)
Abstract:
A method is described which allows to deduce the dead-time of the front-end electronics of the LHCb muon detector from a series of measurements performed at different luminosities at a bunch-crossing rate of 20 MHz. The measured values of the dead-time range from 70 ns to 100 ns. These results allow to estimate the performance of the muon detector at the future bunch-crossing rate of 40 MHz and at…
▽ More
A method is described which allows to deduce the dead-time of the front-end electronics of the LHCb muon detector from a series of measurements performed at different luminosities at a bunch-crossing rate of 20 MHz. The measured values of the dead-time range from 70 ns to 100 ns. These results allow to estimate the performance of the muon detector at the future bunch-crossing rate of 40 MHz and at higher luminosity.
△ Less
Submitted 28 March, 2016; v1 submitted 28 February, 2016;
originally announced February 2016.
-
Density Estimation Trees in High Energy Physics
Authors:
Lucio Anderlini
Abstract:
Density Estimation Trees can play an important role in exploratory data analysis for multidimensional, multi-modal data models of large samples. I briefly discuss the algorithm, a self-optimization technique based on kernel density estimation, and some applications in High Energy Physics.
Density Estimation Trees can play an important role in exploratory data analysis for multidimensional, multi-modal data models of large samples. I briefly discuss the algorithm, a self-optimization technique based on kernel density estimation, and some applications in High Energy Physics.
△ Less
Submitted 3 February, 2015;
originally announced February 2015.
-
A new method based on noise counting to monitor the frontend electronics of the LHCb muon detector
Authors:
L. Anderlini,
R. Antunes Nobrega,
W. Bonivento,
L. Gruber,
A. Kashchuk,
O. Levitskaya,
O. Maev,
G. Martellotti,
G. Penso,
D. Pinci,
A. Sarti,
B. Schmidt
Abstract:
A new method has been developed to check the correct behaviour of the frontend electronics of the LHCb muon detector. This method is based on the measurement of the electronic noise rate at different thresholds of the frontend discriminator. The method was used to choose the optimal discriminator thresholds. A procedure based on this method was implemented in the detector control system and allowe…
▽ More
A new method has been developed to check the correct behaviour of the frontend electronics of the LHCb muon detector. This method is based on the measurement of the electronic noise rate at different thresholds of the frontend discriminator. The method was used to choose the optimal discriminator thresholds. A procedure based on this method was implemented in the detector control system and allowed the detection of a small percentage of frontend channels which had deteriorated. A Monte Carlo simulation has been performed to check the validity of the method.
△ Less
Submitted 20 May, 2013;
originally announced May 2013.
-
Performance of the LHCb muon system
Authors:
A. A. Alves Jr,
L. Anderlini,
M. Anelli,
R. Antunes Nobrega,
G. Auriemma,
W. Baldini,
G. Bencivenni,
R. Berutti,
A. Bizzeti,
V. Bocci,
N. Bondar,
W. Bonivento,
B. Botchin,
S. Cadeddu,
P. Campana,
G. Carboni,
A. Cardini,
M. Carletti,
P. Ciambrone,
E. Dané S. De Capua,
V. De Leo,
C. Deplano,
P. De Simone,
F. Dettori,
A. Falabella
, et al. (48 additional authors not shown)
Abstract:
The performance of the LHCb Muon system and its stability across the full 2010 data taking with LHC running at ps = 7 TeV energy is studied. The optimization of the detector setting and the time calibration performed with the first collisions delivered by LHC is described. Particle rates, measured for the wide range of luminosities and beam operation conditions experienced during the run, are comp…
▽ More
The performance of the LHCb Muon system and its stability across the full 2010 data taking with LHC running at ps = 7 TeV energy is studied. The optimization of the detector setting and the time calibration performed with the first collisions delivered by LHC is described. Particle rates, measured for the wide range of luminosities and beam operation conditions experienced during the run, are compared with the values expected from simulation. The space and time alignment of the detectors, chamber efficiency, time resolution and cluster size are evaluated. The detector performance is found to be as expected from specifications or better. Notably the overall efficiency is well above the design requirements
△ Less
Submitted 15 February, 2013; v1 submitted 6 November, 2012;
originally announced November 2012.
