-
Simulation tools, first results and experimental status of the MURAVES experiment
Authors:
Andrea Giammanco,
Yanwen Hong,
Marwa Al Moussawi,
Fabio Ambrosino,
Antonio Anastasio,
Samip Basnet,
Lorenzo Bonechi,
Massimo Bongi,
Diletta Borselli,
Alan Bross,
Antonio Caputo,
Roberto Ciaranfi,
Luigi Cimmino,
Vitaliano Ciulli,
Raffaello D'Alessandro,
Mariaelena D'Errico,
Catalin Frosin,
Flora Giudicepietro,
Sandro Gonzi,
Giovanni Macedonio,
Vincenzo Masone,
Massimo Orazi,
Andrea Paccagnella,
Rosario Peluso,
Anna Pla-Dalmau
, et al. (7 additional authors not shown)
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments.
△ Less
Submitted 19 June, 2024; v1 submitted 22 November, 2023;
originally announced November 2023.
-
HIKE, High Intensity Kaon Experiments at the CERN SPS
Authors:
E. Cortina Gil,
J. Jerhot,
N. Lurkin,
T. Numao,
B. Velghe,
V. W. S. Wong,
D. Bryman,
L. Bician,
Z. Hives,
T. Husek,
K. Kampf,
M. Koval,
A. T. Akmete,
R. Aliberti,
V. Büscher,
L. Di Lella,
N. Doble,
L. Peruzzo,
M. Schott,
H. Wahl,
R. Wanke,
B. Döbrich,
L. Montalto,
D. Rinaldi,
F. Dettori
, et al. (154 additional authors not shown)
Abstract:
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the St…
▽ More
A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
The MURAVES experiment: study of the Vesuvius Great Cone with Muon Radiography
Authors:
M. D'Errico,
F. Ambrosino,
A. Anastasio,
S. Basnet,
L. Bonechi,
M. Bongi,
A. Bross,
R. Ciaranfi,
L. Cimmino,
C. Ciulli,
R. D'Alessandro,
A. Giammanco,
F. Giudicepietro,
S. Gonzi,
R. Karnam,
G. Macedonio,
V. Masone,
N. Mori,
M. Moussawi,
M. Orazi,
G. Passeggio,
R. Peluso,
A. Pla-Dalmau,
C. Rendon,
A. Samalan
, et al. (6 additional authors not shown)
Abstract:
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techni…
▽ More
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help the modeling of possible eruptive dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. Preliminary results from the analysis of a first data sample are presented.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Space applications of GAGG:Ce scintillators: a study of afterglow emission by proton irradiation
Authors:
Giuseppe Dilillo,
Nicola Zampa,
Riccardo Campana,
Fabio Fuschino,
Giovanni Pauletta,
Irina Rashevskaya,
Filippo Ambrosino,
Marco Baruzzo,
Diego Cauz,
Daniela Cirrincione,
Marco Citossi,
Giovanni Della Casa,
Benedetto Di Ruzza,
Yuri Evangelista,
Gábor Galgóczi,
Claudio Labanti,
Jakub Ripa,
Francesco Tommasino,
Enrico Verroi,
Fabrizio Fiore,
Andrea Vacchi
Abstract:
We discuss the results of a proton irradiation campaign of a GAGG:Ce (Cerium-doped Gadolinium Aluminium Gallium Garnet) scintillation crystal, carried out in the framework of the HERMES-TP/SP (High Energy Rapid Modular Ensemble of Satellites -- Technological and Scientific Pathfinder) mission. A scintillator sample was irradiated with 70 MeV protons, at levels equivalent to those expected in equat…
▽ More
We discuss the results of a proton irradiation campaign of a GAGG:Ce (Cerium-doped Gadolinium Aluminium Gallium Garnet) scintillation crystal, carried out in the framework of the HERMES-TP/SP (High Energy Rapid Modular Ensemble of Satellites -- Technological and Scientific Pathfinder) mission. A scintillator sample was irradiated with 70 MeV protons, at levels equivalent to those expected in equatorial and sun-synchronous low-Earth orbits over orbital periods spanning 6 months to 10 years. The data we acquired are used to introduce an original model of GAGG:Ce afterglow emission. Results from this model are applied to the HERMES-TP/SP scenario, aiming at an upper-bound estimate of the detector performance degradation resulting from afterglow emission.
△ Less
Submitted 14 October, 2022; v1 submitted 6 December, 2021;
originally announced December 2021.
-
BLEMAB European project: muon imaging technique applied to blast furnaces
Authors:
BLEMAB Collaboration,
L. Bonechi,
F. Ambrosino,
P. Andreetto,
G. Bonomi,
D. Borselli,
S. Bottai,
T. Buhles,
I. Calliari,
P. Checchia,
U. Chiarotti,
C. Cialdai,
R. Ciaranfi,
L. Cimmino,
V. Ciulli,
R. D'Alessandro,
M. D'Errico,
R. Ferretti,
F. Finke,
A. Franzen,
B. Glaser,
S. Gonzi,
Y. Liu,
A. Lorenzon,
V. Masone
, et al. (8 additional authors not shown)
Abstract:
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone wher…
▽ More
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone where the slowly downward moving material begins to soften and melt, that plays an important role in the performance of the blast furnace itself. Thanks to the high penetration power of the natural cosmic ray muon radiation, muon transmission radiography represents an appropriate non-invasive methodology for imaging large high-density structures such as blast furnaces, whose linear size can be up to a few tens of meters. A state-of-the-art muon tracking system, whose design profits from the long experience of our collaboration in this field, is currently under development and will be installed in 2022 at a blast furnace on the ArcelorMittal site in Bremen (Germany) for many months. Collected data will be exploited to monitor temporal variations of the average density distribution inside the furnace. Muon radiography results will also be compared with measurements obtained through an enhanced multipoint probe and standard blast furnace models.
△ Less
Submitted 19 January, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
An innovative architecture for a wide band transient monitor on board the HERMES nano-satellite constellation
Authors:
F. Fuschino,
R. Campana,
C. Labanti,
Y. Evangelista,
F. Fiore,
M. Gandola,
M. Grassi,
F. Mele,
F. Ambrosino,
F. Ceraudo,
E. Demenev,
M. Fiorini,
G. Morgante,
R. Piazzolla,
G. Bertuccio,
P. Malcovati,
P. Bellutti,
G. Borghi,
G. Dilillo,
M. Feroci,
F. Ficorella,
G. La Rosa,
P. Nogara,
G. Pauletta,
A. Picciotto
, et al. (13 additional authors not shown)
Abstract:
The HERMES-TP/SP mission, based on a nanosatellite constellation, has very stringent constraints of sensitivity and compactness, and requires an innovative wide energy range instrument. The instrument technology is based on the "siswich" concept, in which custom-designed, low-noise Silicon Drift Detectors are used to simultaneously detect soft X-rays and to readout the optical light produced by th…
▽ More
The HERMES-TP/SP mission, based on a nanosatellite constellation, has very stringent constraints of sensitivity and compactness, and requires an innovative wide energy range instrument. The instrument technology is based on the "siswich" concept, in which custom-designed, low-noise Silicon Drift Detectors are used to simultaneously detect soft X-rays and to readout the optical light produced by the interaction of higher energy photons in GAGG:Ce scintillators. To preserve the inherent excellent spectroscopic performances of SDDs, advanced readout electronics is necessary. In this paper, the HERMES detector architecture concept will be described in detail, as well as the specifically developed front-end ASICs (LYRA-FE and LYRA-BE) and integration solutions. The experimental performance of the integrated system composed by scintillator+SDD+LYRA ASIC will be discussed, demonstrating that the requirements of a wide energy range sensitivity, from 2 keV up to 2 MeV, are met in a compact instrument.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
KLEVER: An experiment to measure BR($K_L\toπ^0ν\barν$) at the CERN SPS
Authors:
F. Ambrosino,
R. Ammendola,
A. Antonelli,
K. Ayers,
D. Badoni,
G. Ballerini,
L. Bandiera,
J. Bernhard,
C. Biino,
L. Bomben,
V. Bonaiuto,
A. Bradley,
M. B. Brunetti,
F. Bucci,
A. Cassese,
R. Camattari,
M. Corvino,
D. De Salvador,
D. Di Filippo,
M. van Dijk,
N. Doble,
R. Fantechi,
S. Fedotov,
A. Filippi,
F. Fontana
, et al. (53 additional authors not shown)
Abstract:
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at…
▽ More
Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at the CERN SPS is to measure the BR for the charged channel to within 10%. For the neutral channel, the BR has never been measured. We are designing the KLEVER experiment to measure BR($K_L\toπ^0ν\barν$) to $\sim$20% using a high-energy neutral beam at the CERN SPS starting in LHC Run 4. The boost from the high-energy beam facilitates the rejection of background channels such as $K_L\toπ^0π^0$ by detection of the additional photons in the final state. On the other hand, the layout poses particular challenges for the design of the small-angle vetoes, which must reject photons from $K_L$ decays esca** through the beam exit amidst an intense background from soft photons and neutrons in the beam. Background from $Λ\to nπ^0$ decays in the beam must also be kept under control. We present findings from our design studies for the beamline and experiment, with an emphasis on the challenges faced and the potential sensitivity for the measurement of BR($K_L\toπ^0ν\barν$).
△ Less
Submitted 22 May, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
Search for $K^{+}\rightarrowπ^{+}ν\overlineν$ at NA62
Authors:
NA62 Collaboration,
G. Aglieri Rinella,
R. Aliberti,
F. Ambrosino,
R. Ammendola,
B. Angelucci,
A. Antonelli,
G. Anzivino,
R. Arcidiacono,
I. Azhinenko,
S. Balev,
M. Barbanera,
J. Bendotti,
A. Biagioni,
L. Bician,
C. Biino,
A. Bizzeti,
T. Blazek,
A. Blik,
B. Bloch-Devaux,
V. Bolotov,
V. Bonaiuto,
M. Boretto,
M. Bragadireanu,
D. Britton
, et al. (227 additional authors not shown)
Abstract:
$K^{+}\rightarrowπ^{+}ν\overlineν$ is one of the theoretically cleanest meson decay where to look for indirect effects of new physics complementary to LHC searches. The NA62 experiment at CERN SPS is designed to measure the branching ratio of this decay with 10\% precision. NA62 took data in pilot runs in 2014 and 2015 reaching the final designed beam intensity. The quality of 2015 data acquired,…
▽ More
$K^{+}\rightarrowπ^{+}ν\overlineν$ is one of the theoretically cleanest meson decay where to look for indirect effects of new physics complementary to LHC searches. The NA62 experiment at CERN SPS is designed to measure the branching ratio of this decay with 10\% precision. NA62 took data in pilot runs in 2014 and 2015 reaching the final designed beam intensity. The quality of 2015 data acquired, in view of the final measurement, will be presented.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
CHANTI: a Fast and Efficient Charged Particle Veto Detector for the NA62 Experiment at CERN
Authors:
F. Ambrosino,
T. Capussela,
D. Di Filippo,
P. Massarotti,
M. Mirra,
M. Napolitano,
V. Palladino,
G. Saracino,
L. Roscilli,
A. Vanzanella,
G. Corradi,
D. Tagnani,
U. Paglia
Abstract:
The design, construction and test of a charged particle detector made of scintillation counters read by Silicon Photomultipliers (SiPM) is described. The detector, which operates in vacuum and is used as a veto counter in the NA62 experiment at CERN, has a single channel time resolution of 1.14 ns, a spatial resolution of ~2.5 mm and an efficiency very close to 1 for penetrating charged particles.
The design, construction and test of a charged particle detector made of scintillation counters read by Silicon Photomultipliers (SiPM) is described. The detector, which operates in vacuum and is used as a veto counter in the NA62 experiment at CERN, has a single channel time resolution of 1.14 ns, a spatial resolution of ~2.5 mm and an efficiency very close to 1 for penetrating charged particles.
△ Less
Submitted 3 January, 2017; v1 submitted 1 December, 2015;
originally announced December 2015.
-
Assessing the Feasibility of Interrogating Nuclear Waste Storage Silos using Cosmic-ray Muons
Authors:
F. Ambrosino,
L. Bonechi,
L. Cimmino,
R. D'Alessandro,
D. G. Ireland,
R. Kaiser,
D. F. Mahon,
N. Mori,
P. Noli,
G. Saracino,
C. Shearer,
L. Viliani,
G. Yang
Abstract:
Muon radiography is a fast growing field in applied scientific research. In recent years, many detector technologies and imaging techniques using the Coulomb scattering and absorption properties of cosmic-ray muons have been developed for the non-destructive assay of various structures across a wide range of applications. This work presents the first results that assess the feasibility of using mu…
▽ More
Muon radiography is a fast growing field in applied scientific research. In recent years, many detector technologies and imaging techniques using the Coulomb scattering and absorption properties of cosmic-ray muons have been developed for the non-destructive assay of various structures across a wide range of applications. This work presents the first results that assess the feasibility of using muons to interrogate waste silos within the UK Nuclear Industry. Two such approaches, using different techniques that exploit each of these properties, have previously been published, and show promising results from both simulation and experimental data for the detection of shielded high-Z materials and density variations from volcanic assay. Both detector systems are based on scintillator and photomultiplier technologies. Results from dedicated simulation studies using both these technologies and image reconstruction techniques are presented for an intermediate-sized nuclear waste storage facility filled with concrete and an array of uranium samples. Both results highlight the potential to identify uranium objects of varying thicknesses greater than 5cm within real-time durations of several weeks. Increased contributions from Coulomb scattering within the concrete of the structure hinder the ability of both approaches to resolve objects of 2cm dimensions even with increased statistics. These results are all dependent on both the position of the objects within the facility and the locations of the detectors. Results for differing thicknesses of concrete, which reflect the unknown composition of the structures under interrogation, are also presented alongside studies performed for a series of data collection durations. It is anticipated that with further research, muon radiography in one, or both of these forms, will play a key role in future industrial applications within the UK Nuclear Industry.
△ Less
Submitted 10 November, 2014;
originally announced November 2014.
-
The large-angle photon veto system for the NA62 experiment at the CERN SPS
Authors:
F. Ambrosino,
B. Angelucci,
A. Antonelli,
F. Costantini,
G. D'Agostini,
D. Di Filippo,
R. Fantechi,
S. Gallorini,
S. Giudici,
E. Leonardi,
I. Mannelli,
P. Massarotti,
M. Moulson,
M. Napolitano,
V. Palladino,
F. Rafaelli,
M. Raggi,
G. Saracino,
M. Serra,
T. Spadaro,
P. Valente,
S. Venditti
Abstract:
The branching ratio (BR) for the decay K^+ \to π^+ν\barν is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the background from dominant kaon decays with final state photons, the large-angle photon vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^{-4}. The LAV detectors make…
▽ More
The branching ratio (BR) for the decay K^+ \to π^+ν\barν is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the background from dominant kaon decays with final state photons, the large-angle photon vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^{-4}. The LAV detectors make use of lead glass blocks recycled from the OPAL electromagnetic calorimeter barrel. We describe the mechanical design and challenges faced during construction, the characterization of the lead glass blocks and solutions adopted for monitoring their performance, and the development of front-end electronics to allow simultaneous time and energy measurements over an extended dynamic range using the time over-threshold technique. Our results are based on test-beam data and are reproduced by a detailed Monte Carlo simulation that includes the readout chain.
△ Less
Submitted 25 July, 2012;
originally announced July 2012.
-
The NA62 LAV front-end electronics
Authors:
A. Antonelli,
G. Corradi,
M. Moulson,
C. Paglia,
M. Raggi,
T. Spadaro,
D. Tagnani,
F. Ambrosino,
D. Di Filippo,
P. Massarotti,
M. Napolitano,
G. Saracino,
B. Angelucci,
F. Costantini,
R. Fantechi,
S. Gallorini,
S. Giudici,
I. Mannelli,
F. Raffaelli,
S. Venditti,
G. D'Agostini,
E. Leonardi,
V. Palladino,
M. Serra,
P. Valente
Abstract:
The branching ratio for the decay $K^+ \to π^+ν\barν$ is sensitive to new physics; the NA62 experiment will measure it to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect particles with better than 1 ns time resolution and 10% energy resolution over a very large energy range. Our custom readout board uses a time-o…
▽ More
The branching ratio for the decay $K^+ \to π^+ν\barν$ is sensitive to new physics; the NA62 experiment will measure it to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect particles with better than 1 ns time resolution and 10% energy resolution over a very large energy range. Our custom readout board uses a time-over-threshold discriminator coupled to a TDC as a straightforward solution to satisfy these requirements. A prototype of the readout system was extensively tested together with the ANTI-A2 large angle veto module at CERN in summer 2010.
△ Less
Submitted 24 November, 2011;
originally announced November 2011.
-
The Large-Angle Photon Veto System for the NA62 Experiment at CERN
Authors:
F. Ambrosino,
B. Angelucci,
A. Antonelli,
F. Costantini,
G. D'Agostini,
D. Di Filippo,
R. Fantechi,
S. Gallorini,
S. Giudici,
E. Leonardi,
I. Mannelli,
P. Massarotti,
M. Moulson,
M. Napolitano,
V. Palladino,
F. Rafaelli,
M. Raggi,
G. Saracino,
M. Serra,
T. Spadaro,
P. Valente,
S. Venditti
Abstract:
The branching ratio (BR) for the decay K^+ \rightarrow π^+ ν\barν is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^-4, as well as provide energy…
▽ More
The branching ratio (BR) for the decay K^+ \rightarrow π^+ ν\barν is a sensitive probe for new physics. The NA62 experiment at the CERN SPS will measure this BR to within about 10%. To reject the dominant background from channels with final state photons, the large-angle vetoes (LAVs) must detect photons of energy as low as 200 MeV with an inefficiency of less than 10^-4, as well as provide energy and time measurements with resolutions of 10% and 1 ns for 1 GeV photons. The LAV detectors make creative reuse of lead glass blocks recycled from the OPAL electromagnetic calorimeter barrel. We describe the mechanical design and challenges faced during construction, the characterization of the lead glass blocks and solutions adopted for monitoring their performance, and the development of front-end electronics to allow simultaneous time and energy measurements over an extended dynamic range using the time-over-threshold technique. Our results are based on test-beam data and are reproduced by a detailed Monte Carlo simulation that includes the readout chain.
△ Less
Submitted 17 November, 2011;
originally announced November 2011.
-
A prototype large-angle photon veto detector for the P326 experiment at CERN
Authors:
F. Ambrosino,
A. Antonelli,
E. Capitolo,
P. S. Cooper,
R. Fantechi,
L. Iannotti,
G. Lamanna,
E. Leonardi,
M. Moulson,
M. Napolitano,
V. Palladino,
M. Raggi,
A. Romano,
G. Saracino,
M. Serra,
T. Spadaro,
P. Valente,
S. Venditti
Abstract:
The P326 experiment at the CERN SPS has been proposed with the purpose of measuring the branching ratio for the decay K^+ \to π^+ ν\barν to within 10%. The photon veto system must provide a rejection factor of 10^8 for π^0 decays. We have explored two designs for the large-angle veto detectors, one based on scintillating tiles and the other using scintillating fibers. We have constructed a proto…
▽ More
The P326 experiment at the CERN SPS has been proposed with the purpose of measuring the branching ratio for the decay K^+ \to π^+ ν\barν to within 10%. The photon veto system must provide a rejection factor of 10^8 for π^0 decays. We have explored two designs for the large-angle veto detectors, one based on scintillating tiles and the other using scintillating fibers. We have constructed a prototype module based on the fiber solution and evaluated its performance using low-energy electron beams from the Frascati Beam-Test Facility. For comparison, we have also tested a tile prototype constructed for the CKM experiment, as well as lead-glass modules from the OPAL electromagnetic barrel calorimeter. We present results on the linearity, energy resolution, and time resolution obtained with the fiber prototype, and compare the detection efficiency for electrons obtained with all three instruments.
△ Less
Submitted 21 November, 2007;
originally announced November 2007.
-
Data handling, reconstruction, and simulation for the KLOE experiment
Authors:
F. Ambrosino
Abstract:
The broad physics program of the KLOE experiment is based on the high event rate at the Frascati phi factory, and calls for an up-to-date system for data acquisition and processing. In this review of the KLOE offline environment, the architecture of the data-processing system and the programs developed for data reconstruction and Monte Carlo simulation are described, as well as the various proce…
▽ More
The broad physics program of the KLOE experiment is based on the high event rate at the Frascati phi factory, and calls for an up-to-date system for data acquisition and processing. In this review of the KLOE offline environment, the architecture of the data-processing system and the programs developed for data reconstruction and Monte Carlo simulation are described, as well as the various procedures used for data handling and transfer between the different components of the system.
△ Less
Submitted 21 April, 2004;
originally announced April 2004.