-
Technical Design Report of the Spin Physics Detector at NICA
Authors:
The SPD Collaboration,
V. Abazov,
V. Abramov,
L. Afanasyev,
R. Akhunzyanov,
A. Akindinov,
I. Alekseev,
A. Aleshko,
V. Alexakhin,
G. Alexeev,
L. Alimov,
A. Allakhverdieva,
A. Amoroso,
V. Andreev,
V. Andreev,
E. Andronov,
Yu. Anikin,
S. Anischenko,
A. Anisenkov,
V. Anosov,
E. Antokhin,
A. Antonov,
S. Antsupov,
A. Anufriev,
K. Asadova
, et al. (392 additional authors not shown)
Abstract:
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to…
▽ More
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to $10^{32}$ cm$^{-2}$ s$^{-1}$. As the main goal, the experiment aims to provide access to the gluon TMD PDFs in the proton and deuteron, as well as the gluon transversity distribution and tensor PDFs in the deuteron, via the measurement of specific single and double spin asymmetries using different complementary probes such as charmonia, open charm, and prompt photon production processes. Other polarized and unpolarized physics is possible, especially at the first stage of NICA operation with reduced luminosity and collision energy of the proton and ion beams. This document is dedicated exclusively to technical issues of the SPD setup construction.
△ Less
Submitted 28 May, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Conceptual design of the Spin Physics Detector
Authors:
V. M. Abazov,
V. Abramov,
L. G. Afanasyev,
R. R. Akhunzyanov,
A. V. Akindinov,
N. Akopov,
I. G. Alekseev,
A. M. Aleshko,
V. Yu. Alexakhin,
G. D. Alexeev,
M. Alexeev,
A. Amoroso,
I. V. Anikin,
V. F. Andreev,
V. A. Anosov,
A. B. Arbuzov,
N. I. Azorskiy,
A. A. Baldin,
V. V. Balandina,
E. G. Baldina,
M. Yu. Barabanov,
S. G. Barsov,
V. A. Baskov,
A. N. Beloborodov,
I. N. Belov
, et al. (270 additional authors not shown)
Abstract:
The Spin Physics Detector, a universal facility for studying the nucleon spin structure and other spin-related phenomena with polarized proton and deuteron beams, is proposed to be placed in one of the two interaction points of the NICA collider that is under construction at the Joint Institute for Nuclear Research (Dubna, Russia). At the heart of the project there is huge experience with polarize…
▽ More
The Spin Physics Detector, a universal facility for studying the nucleon spin structure and other spin-related phenomena with polarized proton and deuteron beams, is proposed to be placed in one of the two interaction points of the NICA collider that is under construction at the Joint Institute for Nuclear Research (Dubna, Russia). At the heart of the project there is huge experience with polarized beams at JINR.
The main objective of the proposed experiment is the comprehensive study of the unpolarized and polarized gluon content of the nucleon. Spin measurements at the Spin Physics Detector at the NICA collider have bright perspectives to make a unique contribution and challenge our understanding of the spin structure of the nucleon. In this document the Conceptual Design of the Spin Physics Detector is presented.
△ Less
Submitted 2 February, 2022; v1 submitted 31 January, 2021;
originally announced February 2021.
-
Letter of Interest for a Neutrino Beam from Protvino to KM3NeT/ORCA
Authors:
A. V. Akindinov,
E. G. Anassontzis,
G. Anton,
M. Ardid,
J. Aublin,
B. Baret,
V. Bertin,
S. Bourret,
C. Bozza,
M. Bruchner,
R. Bruijn,
J. Brunner,
M. Chabab,
N. Chau,
A. S. Chepurnov,
M. Colomer Molla,
P. Coyle,
A. Creusot,
G. de Wasseige,
A. Domi,
C. Donzaud,
T. Eberl,
A. Enzenhöfer,
M. Faifman,
M. D. Filipović
, et al. (66 additional authors not shown)
Abstract:
The Protvino accelerator facility located in the Moscow region, Russia, is in a good position to offer a rich experimental research program in the field of neutrino physics. Of particular interest is the possibility to direct a neutrino beam from Protvino towards the KM3NeT/ORCA detector, which is currently under construction in the Mediterranean Sea 40 km offshore Toulon, France. This proposal is…
▽ More
The Protvino accelerator facility located in the Moscow region, Russia, is in a good position to offer a rich experimental research program in the field of neutrino physics. Of particular interest is the possibility to direct a neutrino beam from Protvino towards the KM3NeT/ORCA detector, which is currently under construction in the Mediterranean Sea 40 km offshore Toulon, France. This proposal is known as P2O. Thanks to its baseline of 2595 km, this experiment would yield an unparalleled sensitivity to matter effects in the Earth, allowing for the determination of the neutrino mass ordering with a high level of certainty after only a few years of running at a modest beam intensity of $\approx$ 90 kW. With a prolonged exposure ($\approx$ 1500 kW*yr), a 2$σ$ sensitivity to the leptonic CP-violating Dirac phase can be achieved. A second stage of the experiment, comprising a further intensity upgrade of the accelerator complex and a densified version of the ORCA detector (Super-ORCA), would allow for up to a 6$σ$ sensitivity to CP violation and a 10$^\circ$-17$^\circ$ resolution on the CP phase after 10 years of running with a 450 kW beam, competitive with other planned experiments. The initial composition and energy spectrum of the neutrino beam would need to be monitored by a near detector, to be constructed several hundred meters downstream from the proton beam target. The same neutrino beam and near detector set-up would also allow for neutrino-nucleus cross section measurements to be performed. A short-baseline sterile neutrino search experiment would also be possible.
△ Less
Submitted 21 August, 2019; v1 submitted 16 February, 2019;
originally announced February 2019.
-
A Timing RPC with low resistive ceramic electrodes
Authors:
R. Sultanov,
A. Akindinov,
R. Beyer,
J. Dreyer,
X. Fan,
R. Greifenhagen,
B. Kämpfer,
R. Kotte,
A. Laso Garcia,
D. Malkevich,
L. Naumann,
V. Plotnikov,
M. Prokudin,
S. Shirinkin,
D. Stach
Abstract:
For precise start time determination a Beam Fragmentation T$_0$ Counter (BFTC) is under development for the Time-of-Flight Wall of the Compressed Baryonic Matter Spectrometer (CBM) at the Facility for Antiproton and Ion Research (FAIR) at Darmstadt/Germany. This detector will be located around the beam pipe, covering the front area of the Projectile Spectator Detector. The fluxes at this region ar…
▽ More
For precise start time determination a Beam Fragmentation T$_0$ Counter (BFTC) is under development for the Time-of-Flight Wall of the Compressed Baryonic Matter Spectrometer (CBM) at the Facility for Antiproton and Ion Research (FAIR) at Darmstadt/Germany. This detector will be located around the beam pipe, covering the front area of the Projectile Spectator Detector. The fluxes at this region are expected to exceed 10$^5$cm$^{-2}$s$^{-1}$. Resistive plate chambers (RPC) with ceramic composite electrodes could be use because of their high rate capabilities and radiation hardness of material. Efficiency $\ge$ 97\%, time resolution $\le$ 90 ps and rate capability $\ge$ 10$^5$cm$^{-2}$s$^{-1}$ were confirmed during many tests with high beam fluxes of relativistic electrons. We confirm the stability of these characteristics with low resistive Si$_3$N$_4$/SiC floating electrodes for a prototype of eight small RPCs, where each of them contains six gas gaps. The active RPC size amounts 20$\times$20 mm$^2$ produced on basis of Al$_3$O$_2$ and Si$_3$N$_4$/SiC ceramics. Recent test results obtained with relativistic electrons at the linear accelerator ELBE of the Helmholtz-Zentrum Dresden-Rossendorf with new PADI-10 Front-end electronic will be presented.
△ Less
Submitted 22 May, 2019; v1 submitted 7 June, 2018;
originally announced June 2018.
-
Two-phase xenon emission detector with electron multiplier and optical readout by multipixel avalanche Geiger photodiodes
Authors:
D. Yu. Akimov,
A. V. Akindinov,
I. S. Alexandrov,
V. A. Belov,
A. I. Bolozdynya,
A. A. Burenkov,
A. F. Buzulutskov,
M. V. Danilov,
Yu. V. Efremenko,
M. A. Kirsanov,
A. G. Kovalenko,
V. N. Stekhanov
Abstract:
A successful operation of a new optical readout system (THGEM + WLS + MGPDs (multichannel array of multipixel avalanche Geiger photodiodes) in a two-phase liquid xenon detector was demonstrated.
A successful operation of a new optical readout system (THGEM + WLS + MGPDs (multichannel array of multipixel avalanche Geiger photodiodes) in a two-phase liquid xenon detector was demonstrated.
△ Less
Submitted 17 April, 2013; v1 submitted 29 March, 2013;
originally announced March 2013.
-
Long-term operation of a multi-channel cosmic muon system based on scintillation counters with MRS APD light readout
Authors:
A. Akindinov,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
S. Kuleshov,
D. Malkevich,
A. Martemiyanov,
A. Nedosekin,
M. Ryabinin,
K. Voloshin
Abstract:
A Cosmic Ray Test Facility (CRTF) is the first large-scale implementation of a scintillation triggering system based on a new scintillation technique known as START. In START, the scintillation light is collected and transported by WLS optical fibers, while light detection is performed by pairs of avalanche photodiodes with the Metal-Resistor-Semiconductor structure operated in the Geiger mode (…
▽ More
A Cosmic Ray Test Facility (CRTF) is the first large-scale implementation of a scintillation triggering system based on a new scintillation technique known as START. In START, the scintillation light is collected and transported by WLS optical fibers, while light detection is performed by pairs of avalanche photodiodes with the Metal-Resistor-Semiconductor structure operated in the Geiger mode (MRS APD). START delivers 100% efficiency of cosmic muon detection, while its intrinsic noise level is less than 10^{-2} Hz. CRTF, consisting of 160 START channels, has been continuously operated by the ALICE TOF collaboration for more than 25 000 hours, and has demonstrated a high level of stability. Fewer than 10% of MRS APDs had to be replaced during this period.
△ Less
Submitted 19 September, 2008;
originally announced September 2008.
-
RPC with low-resistive phosphate glass electrodes as a candidate for the CBM TOF
Authors:
A. Akindinov,
V. Ammosov,
V. Gapienko,
Yu. Grishuk,
F. Guber,
N. Herrmann,
O. Karavichev,
S. Kiselev,
A. Maevskaya,
V. Razin,
A. Semak,
A. Smirnitskiy,
Yu. Sviridov,
V. Tiflov,
K. Voloshin,
V. Zaets,
B. Zagreev
Abstract:
Usage of electrodes made of glass with low bulk resistivity seems to be a promising way to adapt the Resistive Plate Chambers (RPC) to the high-rate environment of the upcoming CBM experiment. A pilot four-gap RPC sample with electrodes made of phosphate glass, which has bulk resistivity in the order of 10^10 Ohm cm, has been studied with MIP beam for TOF applications. The tests have yielded sat…
▽ More
Usage of electrodes made of glass with low bulk resistivity seems to be a promising way to adapt the Resistive Plate Chambers (RPC) to the high-rate environment of the upcoming CBM experiment. A pilot four-gap RPC sample with electrodes made of phosphate glass, which has bulk resistivity in the order of 10^10 Ohm cm, has been studied with MIP beam for TOF applications. The tests have yielded satisfactory results: the efficiency remains above 95% and the time resolution stays within 120 ps up to the particle rate of 18 kHz/cm2. The increase in rate from 2.25 to 18 kHz/cm2 leads to an increase of estimated "tails" fraction in the time spectrum from 1.5% to 4%.
△ Less
Submitted 8 December, 2006;
originally announced December 2006.
-
START: low-noise efficient trigger for cosmic muons
Authors:
A. Akindinov,
D. Mal'kevich,
A. Smirnitskiy,
K. Voloshin
Abstract:
Noise characteristics and MIP registration efficiency of the Scintillation Tile with MRS APD Light Readout (START) were measured with cosmic particles. Encouraging results open a broad range of possibilities for using START in large-scale applications, requiring low-noise, efficient and stable trigger for cosmic muons.
Noise characteristics and MIP registration efficiency of the Scintillation Tile with MRS APD Light Readout (START) were measured with cosmic particles. Encouraging results open a broad range of possibilities for using START in large-scale applications, requiring low-noise, efficient and stable trigger for cosmic muons.
△ Less
Submitted 6 June, 2006;
originally announced June 2006.
-
START as the detector of choice for large-scale muon triggering systems
Authors:
A. Akindinov,
G. Bondarenko,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
D. Mal'kevich,
A. Martemiyanov,
A. Nedosekin,
M. Ryabinin,
V. Sheinkman,
A. Smirnitskiy,
K. Voloshin
Abstract:
Further progress in building high-granular large-scale systems based on Scintillation Tiles with MRS APD light readout (START) became possible thanks to the creation of an improved version of MRS APD. The cost of the system may now be significantly reduced by using inexpensive extruded scintillator. More than 160 START samples were assembled based on this design modification and proved to posses…
▽ More
Further progress in building high-granular large-scale systems based on Scintillation Tiles with MRS APD light readout (START) became possible thanks to the creation of an improved version of MRS APD. The cost of the system may now be significantly reduced by using inexpensive extruded scintillator. More than 160 START samples were assembled based on this design modification and proved to possess 100% MIP detection efficiency and the intrinsic noise rate of less than 0.08 Hz. Long-term stability of START characteristics was confirmed after 3.5 months of operation.
△ Less
Submitted 24 May, 2006;
originally announced May 2006.
-
Scintillation counter with MRS APD light readout
Authors:
A. Akindinov,
G. Bondarenko,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
D. Mal'kevich,
A. Martemiyanov,
M. Ryabinin,
A. Smirnitskiy,
K. Voloshin
Abstract:
START, a high-efficiency and low-noise scintillation detector for ionizing particles, was developed for the purpose of creating a high-granular system for triggering cosmic muons. Scintillation light in START is detected by MRS APDs (Avalanche Photo-Diodes with Metal-Resistance-Semiconductor structure), operated in the Geiger mode, which have 1 mm^2 sensitive areas. START is assembled from a 15…
▽ More
START, a high-efficiency and low-noise scintillation detector for ionizing particles, was developed for the purpose of creating a high-granular system for triggering cosmic muons. Scintillation light in START is detected by MRS APDs (Avalanche Photo-Diodes with Metal-Resistance-Semiconductor structure), operated in the Geiger mode, which have 1 mm^2 sensitive areas. START is assembled from a 15 x 15 x 1 cm^3 scintillating plastic plate, two MRS APDs and two pieces of wavelength-shifting optical fiber stacked in circular coils inside the plastic. The front-end electronic card is mounted directly on the detector. Tests with START have confirmed its operational consistency, over 99% efficiency of MIP registration and good homogeneity. START demonstrates a low intrinsic noise of about 10^{-2} Hz. If these detectors are to be mass-produced, the cost of a mosaic array of STARTs is estimated at a moderate level of 2-3 kUSD/m^2.
△ Less
Submitted 27 March, 2006;
originally announced March 2006.
-
100 ps time-of-flight resolution of Dielectric Resistive Plate Chamber
Authors:
A. Akindinov,
V. Golovin,
A. Martemiyanov,
V. Petrov,
V. Plotnikov,
A. Smirnitsky,
K. Voloshin
Abstract:
Time of flight of a minimum ionizing particle along a fixed base has been measured with a 100 ps accuracy by means of a Dielectric Resistive Plate Chamber (DRPC) with 4 x 0.3 mm gas gaps. DRPC timing characteristics have been studied with different applied voltages, discriminating thresholds and beam intensities. It may be stated that the time-of-flight resolution of gaseous detectors developed…
▽ More
Time of flight of a minimum ionizing particle along a fixed base has been measured with a 100 ps accuracy by means of a Dielectric Resistive Plate Chamber (DRPC) with 4 x 0.3 mm gas gaps. DRPC timing characteristics have been studied with different applied voltages, discriminating thresholds and beam intensities. It may be stated that the time-of-flight resolution of gaseous detectors developed within the ALICE experiment has reached the level of the best known scintillation counters.
△ Less
Submitted 21 February, 2005;
originally announced February 2005.
-
Dielectric Resistive Plate Chamber as a detector for time-of-flight measurements
Authors:
A. Akindinov,
V. Golovin,
A. Martemiyanov,
V. Petrov,
A. Smirnitskiy,
K. Voloshin
Abstract:
Principles of operation, construction and first test results of a Dielectric Resistive Plate Chamber (DRPC) are described. The detector has shown stability of operation in the avalanche mode of gas amplfication within a wide range of applied voltages. Double-gap DRPCs have demonstrated the MIP registration efficiency of 97% and the time resolution of 180-200 ps. No changes in DRPC operation have…
▽ More
Principles of operation, construction and first test results of a Dielectric Resistive Plate Chamber (DRPC) are described. The detector has shown stability of operation in the avalanche mode of gas amplfication within a wide range of applied voltages. Double-gap DRPCs have demonstrated the MIP registration efficiency of 97% and the time resolution of 180-200 ps. No changes in DRPC operation have been observed with test beam intensities up to 10^3 Hz/cm^2.
△ Less
Submitted 2 December, 2004; v1 submitted 15 October, 2004;
originally announced October 2004.