-
Exploring the Potential of Two-Dimensional Materials for Innovations in Multifunctional Electrochromic Biochemical Sensors: A Review
Authors:
Nadia Anwar,
Guangya Jiang,
Yi Wen,
Muqarrab Ahmed,
Haodong Zhong,
Shen Ao,
Zehui Li,
Yunhan Ling,
Grégory F. Schneider,
Wangyang Fu,
Zhengjun Zhang
Abstract:
In this review, the current advancements in electrochromic sensors based on two-dimensional (2D) materials with rich chemical and physical properties are critically examined. By summarizing the current trends in and prospects for utilizing multifunctional electrochromic devices (ECDs) in environmental monitoring, food quality control, medical diagnosis, and life science-related investigations, we…
▽ More
In this review, the current advancements in electrochromic sensors based on two-dimensional (2D) materials with rich chemical and physical properties are critically examined. By summarizing the current trends in and prospects for utilizing multifunctional electrochromic devices (ECDs) in environmental monitoring, food quality control, medical diagnosis, and life science-related investigations, we explore the potential of using 2D materials for rational design of ECDs with compelling electrical and optical properties for biochemical sensing applications.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Characteristics and development of the main phase disturbance in geomagnetic storms (Dst $\le$ -50 nT)
Authors:
Osman M. Ahmed,
Badruudin Zaheer Ahmad,
Moncef Derouich
Abstract:
We present geomagnetic storms (GSs) selected from three solar cycles, spanning the years 1995 to 2022. We studied the development of the main phase of storms within disturbance storm time (Dst) amplitudes ranging from Dst =-64 nT to Dst=- 422 nT. In order to determine the solar wind (SW) parameters that mainly influence the main phase development of a GS, which can best describe the SW-magnetosphe…
▽ More
We present geomagnetic storms (GSs) selected from three solar cycles, spanning the years 1995 to 2022. We studied the development of the main phase of storms within disturbance storm time (Dst) amplitudes ranging from Dst =-64 nT to Dst=- 422 nT. In order to determine the solar wind (SW) parameters that mainly influence the main phase development of a GS, which can best describe the SW-magnetosphere coupling, we divided our selected GSs into four groups based on main phase duration. Superposed epoch analysis was performed on the selected geomagnetic indices, SW plasma and field parameters, and their derivatives separately for each group. To that end, the dynamics of GS main phase development is mainly guided by interplanetary driver magnetic field southward component, (-Bz). It has been determined that there is a temporal difference between the peak values of Bz and Dst. As a result, Dst is delayed from Bz by 1-4 hours, which is crucial for space weather forecasting. The peak of Dst has a direct relationship with the amplitude of storm sudden commencement (SSC) and an inverse relationship with the duration of SSC. The inter-relationship between the peaks of the three indices (Dst, AE, and ap) during GS, is also obtained. Dst is found to be more closely related to ap than AE. To determine the best fit SW parameter to the geomagnetic activity indices, we used a linear correlation between the peak values of individual geomagnetic indices and SW plasma and field parameters and their derivatives. An electric field related function involving speed and IMF (v$^{4/3}$Bz) when coupled with a viscous term ($ρ^{1/2}$) correlates very well with the intensity of the GS (Dst$ _{min} $ or $ Δ$Dst) and the magnitude of (ap$_{max}$) and (AE$_{max}$) during storms. However, a related function (v$^{4/3}$B$ρ^{1/2}$) represents slightly better the peak of AE$_{max}$ during the storms.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Multi-parameter study for a new Ground-Based telescope in Egypt
Authors:
Mohamed S. Darwish,
Hazem Badreldin,
Nasser M. Ahmed,
Mostafa Morsy,
E. E. Kohil,
Hany M. Hassan,
I. Helmy,
Ahmed shokry,
M. A. Hassan,
S. M. Saad,
G. M. Hamed,
Z. F. Ghatass,
S. A. Ata
Abstract:
A multi-parameter analysis was conducted to evaluate the impact of meteorological parameters, night sky brightness and seismic hazard on proposed sites for the new optical/infrared Egyptian astronomical telescope. The ERA5 reanalysis data set is used to get the following meteorological parameters: Total cloud coverage fraction, precipitable water vapor, relative humidity, wind speed & direction an…
▽ More
A multi-parameter analysis was conducted to evaluate the impact of meteorological parameters, night sky brightness and seismic hazard on proposed sites for the new optical/infrared Egyptian astronomical telescope. The ERA5 reanalysis data set is used to get the following meteorological parameters: Total cloud coverage fraction, precipitable water vapor, relative humidity, wind speed & direction and Air temperature. To estimate the aerosol optical depth we used the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). Light pollution over the candidate sites was measured from Visible Infrared Imaging Radiometer Suite (VIIRS) Day Night Band (DNB). The seismic input in terms of maximum acceleration and response spectra were computed using a physics-based ground motion approach to assess the seismic hazards and consequently the designation of seismic resistant structure for the proposed sites to be able to assess the seismic hazards for the candidate sites. Of the seven nominated sites, two sites are found to have the best measurements and might be considered future sites for the new Egyptian Astronomical telescope. The first site is located in the south of the Sinai peninsula, while the second one is located in the Red Sea mountains region.
△ Less
Submitted 7 October, 2023;
originally announced October 2023.
-
Towards Develo** Mid-Infrared Photonics Using Mxenes
Authors:
Yas Al-Hadeethi,
Chandraman Patil,
Wafa Said Bait Haridh,
Moustafa Ahmed,
Jamaan E. Alassafi,
Nada M. Bedaiwi,
Elham Heidari,
Hamed Dalir
Abstract:
Recent research and development in the mid-infrared (IR) wavelength range (2-20 um) for a variety of applications, such as trace gas monitoring, thermal imaging, and free space communications have shown tremendous and fascinating progress. MXenes, which mainly refer to two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, have drawn a lot of interest since their first invest…
▽ More
Recent research and development in the mid-infrared (IR) wavelength range (2-20 um) for a variety of applications, such as trace gas monitoring, thermal imaging, and free space communications have shown tremendous and fascinating progress. MXenes, which mainly refer to two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, have drawn a lot of interest since their first investigation in 2011. MXenes project enormous potential for use in optoelectronics, photonics, catalysis, and energy harvesting fields proven by extensive experimental and theoretical studies over a decade. MXenes offers a novel 2D nano platform for cutting-edge optoelectronics devices due to their interesting mechanical, optical, and electrical capabilities, along with their elemental and chemical composition. We here discuss the key developments of MXene emphasizing the evolution of material synthesis methods over time and the resulting device applications. Photonic and optoelectronic device design and fabrication for mid-IR photonics are demonstrated by integrating MXene materials with various electrical and photonic platforms. Here, we show the potential of using Mxene in photonics for mid-IR applications and a pathway toward achieving next-generation devices for various applications.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
A compact 20-pass thin-disk multipass amplifier stable against thermal lensing effects and delivering 330 mJ pulses with $\bf{M^2 < 1.17}$
Authors:
Manuel Zeyen,
Lukas Affolter,
Marwan Abdou Ahmed,
Thomas Graf,
Oguzhan Kara,
Klaus Kirch,
Miroslaw Marszalek,
François Nez,
Ahmed Ouf,
Randolf Pohl,
Siddharth Rajamohanan,
Pauline Yzombard,
Karsten Schuhmann,
Aldo Antognini
Abstract:
We report on an Yb:YAG thin-disk multipass amplifier delivering 50 ns long pulses at a central wavelength of 1030 nm with an energy of 330 mJ at a repetition rate of 100 Hz. The beam quality factor at the maximum energy was measured to be $\text{M}^2 = 1.17$. The small signal gain is 20, and the gain at 330 mJ was measured to be 6.9. The 20-pass amplifier is designed as a concatenation of stable r…
▽ More
We report on an Yb:YAG thin-disk multipass amplifier delivering 50 ns long pulses at a central wavelength of 1030 nm with an energy of 330 mJ at a repetition rate of 100 Hz. The beam quality factor at the maximum energy was measured to be $\text{M}^2 = 1.17$. The small signal gain is 20, and the gain at 330 mJ was measured to be 6.9. The 20-pass amplifier is designed as a concatenation of stable resonator segments in which the beam is alternately Fourier transformed and relay-imaged back to the disk by a 4f-imaging optical scheme stage. The Fourier transform propagation makes the output beam robust against spherical phase front distortions, while the 4f-stage is used to compensate the thermal lens of the thin-disk and to reduce the footprint of the amplifier.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Injection-seeded high-power Yb:YAG thin-disk laser stabilized by the Pound-Drever-Hall method
Authors:
Manuel Zeyen,
Lukas Affolter,
Marwan Abdou Ahmed,
Thomas Graf,
Oguzhan Kara,
Klaus Kirch,
Adrian Langenbach,
Miroslaw Marszalek,
François Nez,
Ahmed Ouf,
Randolf Pohl,
Siddharth Rajamohanan,
Pauline Yzombard,
Aldo Antognini,
Karsten Schuhmann
Abstract:
We demonstrate an injection-seeded thin-disk Yb:YAG laser at 1030 nm, stabilized by the Pound-Drever-Hall (PDH) method. We modified the PDH scheme to obtain an error signal free from Trojan locking points, which allowed robust re-locking of the laser and reliable long-term operation. The single-frequency pulses have 50 mJ energy (limited to avoid laser-induced damage) with a beam quality of…
▽ More
We demonstrate an injection-seeded thin-disk Yb:YAG laser at 1030 nm, stabilized by the Pound-Drever-Hall (PDH) method. We modified the PDH scheme to obtain an error signal free from Trojan locking points, which allowed robust re-locking of the laser and reliable long-term operation. The single-frequency pulses have 50 mJ energy (limited to avoid laser-induced damage) with a beam quality of $\text{M}^2$ < 1.1 and an adjustable length of 55-110 ns. Heterodyne measurements confirmed a spectral linewidth of 3.7 MHz. The short pulse build-up time (850 ns) makes this laser suitable for laser spectroscopy of muonic hydrogen, pursued by the CREMA collaboration.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
The helion charge radius from laser spectroscopy of muonic helium-3 ions
Authors:
The CREMA Collaboration,
Karsten Schuhmann,
Luis M. P. Fernandes,
François Nez,
Marwan Abdou Ahmed,
Fernando D. Amaro,
Pedro Amaro,
François Biraben,
Tzu-Ling Chen,
Daniel S. Covita,
Andreas J. Dax,
Marc Diepold,
Beatrice Franke,
Sandrine Galtier,
Andrea L. Gouvea,
Johannes Götzfried,
Thomas Graf,
Theodor W. Hänsch,
Malte Hildebrandt,
Paul Indelicato,
Lucile Julien,
Klaus Kirch,
Andreas Knecht,
Franz Kottmann,
Julian J. Krauth
, et al. (15 additional authors not shown)
Abstract:
Hydrogen-like light muonic ions, in which one negative muon replaces all the electrons, are extremely sensitive probes of nuclear structure, because the large muon mass increases tremendously the wave function overlap with the nucleus. Using pulsed laser spectroscopy we have measured three 2S-2P transitions in the muonic helium-3 ion ($μ^3$He$^+$), an ion formed by a negative muon and bare helium-…
▽ More
Hydrogen-like light muonic ions, in which one negative muon replaces all the electrons, are extremely sensitive probes of nuclear structure, because the large muon mass increases tremendously the wave function overlap with the nucleus. Using pulsed laser spectroscopy we have measured three 2S-2P transitions in the muonic helium-3 ion ($μ^3$He$^+$), an ion formed by a negative muon and bare helium-3 nucleus. This allowed us to extract the Lamb shift $E(2P_{1/2}-2S_{1/2})= 1258.598(48)^{\rm exp}(3)^{\rm theo}$ meV, the 2P fine structure splitting $E_{\rm FS}^{\rm exp} = 144.958(114)$ meV, and the 2S-hyperfine splitting (HFS) $E_{\rm HFS}^{\rm exp} = -166.495(104)^{\rm exp}(3)^{\rm theo}$ meV in $μ^3$He$^+$. Comparing these measurements to theory we determine the rms charge radius of the helion ($^3$He nucleus) to be $r_h$ = 1.97007(94) fm. This radius represents a benchmark for few nucleon theories and opens the way for precision tests in $^3$He atoms and $^3$He-ions. This radius is in good agreement with the value from elastic electron scattering, but a factor 15 more accurate. Combining our Lamb shift measurement with our earlier one in $μ^4$He$^+$ we obtain $r_h^2-r_α^2 = 1.0636(6)^{\rm exp}(30)^{\rm theo}$ fm$^2$ to be compared to results from the isotope shift measurements in regular He atoms, which are however affected by long-standing tensions. By comparing $E_{\rm HFS}^{\rm exp}$ with theory we also obtain the two-photon-exchange contribution (including higher orders) which is another important benchmark for ab-initio few-nucleon theories aiming at understanding the magnetic and current structure of light nuclei.
△ Less
Submitted 25 June, 2023; v1 submitted 19 May, 2023;
originally announced May 2023.
-
Diffusion of muonic hydrogen in hydrogen gas and the measurement of the 1$s$ hyperfine splitting of muonic hydrogen
Authors:
J. Nuber,
A. Adamczak,
M. Abdou Ahmed,
L. Affolter,
F. D. Amaro,
P. Amaro,
P. Carvalho,
Y. -H. Chang,
T. -L. Chen,
W. -L. Chen,
L. M. P. Fernandes,
M. Ferro,
D. Goeldi,
T. Graf,
M. Guerra,
T. W. Hänsch,
C. A. O. Henriques,
M. Hildebrandt,
P. Indelicato,
O. Kara,
K. Kirch,
A. Knecht,
F. Kottmann,
Y. -W. Liu,
J. Machado
, et al. (24 additional authors not shown)
Abstract:
The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy. In the proposed experiment, the $μ$p atom is excited by a laser pulse from the singlet to the triplet hyperfine sub-levels, and is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The…
▽ More
The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy. In the proposed experiment, the $μ$p atom is excited by a laser pulse from the singlet to the triplet hyperfine sub-levels, and is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The resulting increase of kinetic energy after this cycle modifies the $μ$p atom diffusion in the hydrogen gas and the arrival time of the $μ$p atoms at the target walls. This laser-induced modification of the arrival times is used to expose the atomic transition. In this paper we present the simulation of the $μ$p diffusion in the H$_2$ gas which is at the core of the experimental scheme. These simulations have been implemented with the Geant4 framework by introducing various low-energy processes including the motion of the H$_2$ molecules, i.e. the effects related with the hydrogen target temperature. The simulations have been used to optimize the hydrogen target parameters (pressure, temperatures and thickness) and to estimate signal and background rates. These rates allow to estimate the maximum time needed to find the resonance and the statistical accuracy of the spectroscopy experiment.
△ Less
Submitted 24 May, 2023; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Pound-Drever-Hall locking scheme free from Trojan operating points
Authors:
Manuel Zeyen,
Lukas Affolter,
Marwan Abdou Ahmed,
Thomas Graf,
Oguzhan Kara,
Klaus Kirch,
Miroslaw Marszalek,
François Nez,
Ahmed Ouf,
Randolf Pohl,
Siddharth Rajamohanan,
Pauline Yzombard,
Aldo Antognini,
Karsten Schuhmann
Abstract:
The Pound-Drever-Hall (PDH) technique is a popular method for stabilizing the frequency of a laser to a stable optical resonator or, vice versa, the length of a resonator to the frequency of a stable laser. We propose a refinement of the technique yielding an "infinite" dynamic (capture) range so that a resonator is correctly locked to the seed frequency, even after large perturbations. The stable…
▽ More
The Pound-Drever-Hall (PDH) technique is a popular method for stabilizing the frequency of a laser to a stable optical resonator or, vice versa, the length of a resonator to the frequency of a stable laser. We propose a refinement of the technique yielding an "infinite" dynamic (capture) range so that a resonator is correctly locked to the seed frequency, even after large perturbations. The stable but off-resonant lock points (also called Trojan operating points), present in conventional PDH error signals, are removed by phase modulating the seed laser at a frequency corresponding to half the free spectral range of the resonator. We verify the robustness of our scheme experimentally by realizing an injection-seeded Yb:YAG thin-disk laser. We also give an analytical formulation of the PDH error signal for arbitrary modulation frequencies and discuss the parameter range for which our PDH locking scheme guarantees correct locking. Our scheme is simple as it does not require additional electronics apart from the standard PDH setup and is particularly suited to realize injection-seeded lasers and injection-seeded optical parametric oscillators.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
Ultrasonic Estimation of Soft Tissue Visco Elastic Properties
Authors:
Hassan M. Ahmed
Abstract:
Conventional imaging of diagnostic ultrasound is widely used. Although it makes the differences in the soft tissues echogenicities' apparent and clear, it fails in describing and estimating the soft tissue mechanical properties. It cannot portray their mechanical properties, such as the elasticity and stiffness. Estimating the mechanical properties increases chances of the identification of lesion…
▽ More
Conventional imaging of diagnostic ultrasound is widely used. Although it makes the differences in the soft tissues echogenicities' apparent and clear, it fails in describing and estimating the soft tissue mechanical properties. It cannot portray their mechanical properties, such as the elasticity and stiffness. Estimating the mechanical properties increases chances of the identification of lesions or any pathological changes. Physicians are now characterizing the tissue's mechanical properties as diagnostic metrics. Estimating the tissue's mechanical properties is achieved by applying an Acoustic Radiation Force Impulse (ARFI) on the tissue and calculating the resulted shear wave speed. Due to the difficulty of calculating the shear wave speed precisely inside the tissue, it is estimated by analyzing ultrasound images of the tissue at a very high frame rate. In this study, the shear wave speed is estimated using finite element analysis. A two-dimensional model is constructed to simulate the tissue's mechanical properties. For a generalized soft tissue model, Agar-gelatine model is used because it has similar properties to the soft tissue. A point force is applied at the center of the proposed model. As a result of this force, a deformation is caused. Peak displacements are tracked along the lateral dimension of the model to estimate the shear wave speed of the propagating wave using the Time-To-Peak displacement (TTP) method.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Assessment of Biomechanical Properties for Corneal Post Refractive Surgery
Authors:
Hassan M. Ahmed,
Nancy M. Salem,
Walid I. Al-Atabany
Abstract:
A stable shape for corneas experiencing refractive surgery has to be sustained so as to elude post-refractive surgery de-compensation. This de-compensation leads to visual complications and unsatisfactory procedure recovery. Variation in corneal lamellae and collagen fibres is induced by recent LASER refractive surgical procedures utilizing LASER ablation and disruption techniques. Conserving a st…
▽ More
A stable shape for corneas experiencing refractive surgery has to be sustained so as to elude post-refractive surgery de-compensation. This de-compensation leads to visual complications and unsatisfactory procedure recovery. Variation in corneal lamellae and collagen fibres is induced by recent LASER refractive surgical procedures utilizing LASER ablation and disruption techniques. Conserving a steady response of central apex flattening and peripheral steepening in an elastic cornea pre- and post- procedure is the ultimate purpose of successful refractive surgery. Early diagnosis of ectatic corneal disorders and better understanding of corneal pathogenesis is achieved by assessment of corneal biomechanical properties. The ultimate objective of this research is to estimate the biomechanical properties for both normal and pathogenic corneal tissue pre- and post-operative refractive surgery. This achieved using ultrasonic acoustic radiation force impulse as a non-invasive method accounting for its high localization. Induced displacement tracking methods will be utilized for assessment of soft tissue biomechanical properties related to the investigated soft tissue. Ultrasound probe simulations will be carried out to optimize the probe design. FEM simulations will take place to precisely estimate in-situ corneal tissue biomechanics. In this research, corneal biomechanical properties are studied and estimated using acoustic radiation force impulse. This is achieved either by estimating the focal peak axial deformation value or by estimating the shear wave speed for the resulting propagating deformation wave.
△ Less
Submitted 27 August, 2022;
originally announced August 2022.
-
Laser excitation of the 1s-hyperfine transition in muonic hydrogen
Authors:
P. Amaro,
A. Adamczak,
M. Abdou Ahmed,
L. Affolter,
F. D. Amaro,
P. Carvalho,
T. -L. Chen,
L. M. P. Fernandes,
M. Ferro,
D. Goeldi,
T. Graf,
M. Guerra,
T. W. Hänsch,
C. A. O. Henriques,
Y. -C. Huang,
P. Indelicato,
O. Kara,
K. Kirch,
A. Knecht,
F. Kottmann,
Y. -W. Liu,
J. Machado,
M. Marszalek,
R. D. P. Mano,
C. M. B. Monteiro
, et al. (21 additional authors not shown)
Abstract:
The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy to determine the two-photon-exchange contribution with $2\times10^{-4}$ relative accuracy. In the proposed experiment, the $μ$p atom undergoes a laser excitation from the singlet hyperfine state to the triplet hyperfine…
▽ More
The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($μ$p) with 1 ppm accuracy by means of pulsed laser spectroscopy to determine the two-photon-exchange contribution with $2\times10^{-4}$ relative accuracy. In the proposed experiment, the $μ$p atom undergoes a laser excitation from the singlet hyperfine state to the triplet hyperfine state, {then} is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The resulting increase of kinetic energy after the collisional deexcitation is used as a signature of a successful laser transition between hyperfine states. In this paper, we calculate the combined probability that a $μ$p atom initially in the singlet hyperfine state undergoes a laser excitation to the triplet state followed by a collisional-induced deexcitation back to the singlet state. This combined probability has been computed using the optical Bloch equations including the inelastic and elastic collisions. Omitting the decoherence effects caused by {the laser bandwidth and }collisions would overestimate the transition probability by more than a factor of two in the experimental conditions. Moreover, we also account for Doppler effects and provide the matrix element, the saturation fluence, the elastic and inelastic collision rates for the singlet and triplet states, and the resonance linewidth. This calculation thus quantifies one of the key unknowns of the HFS experiment, leading to a precise definition of the requirements for the laser system and to an optimization of the hydrogen gas target where $μ$p is formed and the laser spectroscopy will occur.
△ Less
Submitted 7 June, 2022; v1 submitted 30 November, 2021;
originally announced December 2021.
-
Gross patient error detection via cine transmission dosimetry
Authors:
Nguyen Phuong Dang,
Victor Gabriel Leandro Alves,
Mahmoud Ahmed,
Jeffrey Siebers
Abstract:
$\textbf{Purpose:}$ To quantify the effectiveness of EPID-based cine transmission dosimetry to detect gross patient anatomic errors. $\textbf{Method and Materials:}…
▽ More
$\textbf{Purpose:}$ To quantify the effectiveness of EPID-based cine transmission dosimetry to detect gross patient anatomic errors. $\textbf{Method and Materials:}$ EPID image frames resulting from fluence transmitted through multiple patients anatomies are simulated for 100 msec delivery intervals for hypothetical 6 MV VMAT deliveries. Frames simulated through 10 head-and-neck CTs and 19 prostate CTs with and without 1-3 mm shift and 1-3 degree rotations were used to quantify expected in-tolerance clinical setup variations. Per-frame analysis methods to determine if simulated gross errors of (a) 10-20 mm patient miss alignment offsets and (b) 15-20 degree patient rotations could be reliably distinguished from the above baseline variations. For the prostate image sets, frames simulated through the reference CT are intercompared with (c) frames through 8-13 different CT's for the same patient to quantify expected inter-treatment frame variation. ROC analysis of per-frame error discrimination based upon (i) frame image differences, (ii) frame histogram comparisons, (iii) image feature matching, and (iv) image distance were used to quantify error detectability. $\textbf{Results:}$ Each error detection method was able to distinguish gross patient miss-alignment and gross rotations from in-tolerance levels for both H&N and prostate datasets. The image distance algorithm is the best method based on AUC. $\textbf{Conclusion:}$ In-field gross error detection was possible for gross patient miss-alignments and incorrect patients. For prostate cases, the methods used were able to distinguish different patients from daily patient variations.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
On-chip Nanophotonic Broadband Wavelength Detector with 2D-Electron Gas
Authors:
Vishal Kaushik,
Swati Rajput,
Sulabh Srivastav,
Lalit Singh,
Prem Babu,
Elham Heidari,
Moustafa Ahmed,
Yas Al-Hadeethi,
Hamed Dalir,
Volker J. Sorger,
Mukesh Kumar
Abstract:
Miniaturized, low-cost wavelength detectors are gaining enormous interest as we step into the new age of photonics. Incompatibility with integrated circuits or complex fabrication requirement in most of the conventionally used filters necessitates the development of a simple, on-chip platform for easy-to-use wavelength detection system. Also, intensity fluctuations hinder precise, noise free detec…
▽ More
Miniaturized, low-cost wavelength detectors are gaining enormous interest as we step into the new age of photonics. Incompatibility with integrated circuits or complex fabrication requirement in most of the conventionally used filters necessitates the development of a simple, on-chip platform for easy-to-use wavelength detection system. Also, intensity fluctuations hinder precise, noise free detection of spectral information. Here we propose a novel approach of utilizing wavelength sensitive photocurrent across semiconductor heterojunctions to experimentally validate broadband wavelength detection on an on-chip platform with simple fabrication process. The proposed device utilizes linear frequency response of internal photoemission via 2-D electron gas in a ZnO based heterojunction along with a reference junction for coherent common mode rejection. We report sensitivity of 0.96 uA/nm for a broad wavelength-range of 280 nm from 660-940 nm. Simple fabrication process, efficient intensity noise cancelation along with heat resistance and radiation hardness of ZnO makes the proposed platform simple, low-cost and efficient alternative for several applications such as optical spectrometers, sensing and IOTs.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Synthesis and Characterizations of CH3NH3PbI3:ZnS Microrods for Optoelectronic Applications
Authors:
Mohammad Tanvir Ahmed,
Shariful Islam,
Muhammad Shahriar Bashar,
Md. Abul Hossain,
Farid Ahmed
Abstract:
Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range.
Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range.
△ Less
Submitted 16 February, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
OxyJet: Design and Evaluation of A Low-Cost Precision Venturi Based Continuous Positive Airway Pressure (CPAP) System
Authors:
Md. Kawsar Ahmed,
Meemnur Rashid,
Kaisar Ahmed Alman,
Farhan Muhib,
Saeedur Rahman,
Taufiq Hasan
Abstract:
The Covid-19 pandemic has strained the hospital systems in many countries in the world, especially in develo** countries. In many low-resource hospitals, severely ill hypoxemic Covid-19 patients are treated with various forms of low-flow oxygen therapy (0-15 L/min), including interfaces such as a nasal cannula, Hudson mask, venturi-mask, and non-rebreather masks. When 15L/min of pure oxygen flow…
▽ More
The Covid-19 pandemic has strained the hospital systems in many countries in the world, especially in develo** countries. In many low-resource hospitals, severely ill hypoxemic Covid-19 patients are treated with various forms of low-flow oxygen therapy (0-15 L/min), including interfaces such as a nasal cannula, Hudson mask, venturi-mask, and non-rebreather masks. When 15L/min of pure oxygen flow is not sufficient for the patient, treatment guidelines suggest non-invasive positive pressure ventilation (NIPPV) or high-flow nasal oxygenation (HFNO) as the next stage of treatment. However, administering HFNO in the general wards of a low-resource hospital is difficult due to several factors, including difficulty in operation, unavailability of electric power outlets, and frequent maintenance. Therefore, in many cases, the highest level of care a patient receives in the general ward is 15L/min of oxygen on a Non-Rebreather Mask. With a shortage of Intensive Care Unit (ICU) beds, this is a major problem since intermediate forms of treatments are simply not available at an affordable cost. To address this gap, we have developed a low-cost CPAP system specifically designed for low-resource hospitals. The device is a precision venturi-based flow-generator capable of providing up to 60L/min of flow. The device utilizes the mechanics of a jet pump driven by high-pressure oxygen to increase the volumetric flow rate by entraining atmospheric air. The fraction of inspired oxygen (FiO2) can be attained between 40 - 100% using a dual-flowmeter. Consisting of a traditional 22mm breathing circuit, a non-vented CPAP mask, and a Positive End-Expiratory Pressure (PEEP) valve, the CPAP can provide positive pressures between 5-20 cm H2O. The device is manufactured using local 3D printing and workshop facilities.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
The Main Role of Thermal Annealing in Controlling the Structural and Optical Properties of ITO Thin Film Layer
Authors:
Moustafa Ahmed,
Ahmed Bakry,
Ammar Qasem,
Hamed Dalir
Abstract:
Here we report on studying the electronic and optical material properties of the technologically-relevant material indium tin oxide (ITO) as a function of thermal annealing. In this work, ITO powder has been prepared utilizing solid-state reaction methods. An electron beam gun technology has been used to prepare a ITO film (325 nm). The ITO window layer has been investigated at various temperature…
▽ More
Here we report on studying the electronic and optical material properties of the technologically-relevant material indium tin oxide (ITO) as a function of thermal annealing. In this work, ITO powder has been prepared utilizing solid-state reaction methods. An electron beam gun technology has been used to prepare a ITO film (325 nm). The ITO window layer has been investigated at various temperatures. The effects of absolute temperature on the structural, optical, and electrical properties of the prepared ITO thin film layer are investigated. The energy band type corresponding to the orbital transitions has been determined, and the energies of the orbital transitions have been calculated in the Tauc region, HOMO/LUMO gap, and charge transfer gap. In additions, the exciton and Urbach energies have been computed. It has been found that these energies increase with increasing the annealing temperature, except for Urbach's energies which behave differently. Thin-film quality coefficient, surface resistance, and thermal emission in addition to the angle of refraction as a function of wavelength, have been determined.
△ Less
Submitted 25 December, 2020;
originally announced April 2021.
-
Grand challenges and emergent modes of convergence science
Authors:
Alexander M. Petersen,
Mohammed E. Ahmed,
Ioannis Pavlidis
Abstract:
To address complex problems, scholars are increasingly faced with challenges of integrating diverse knowledge domains. We analyzed the evolution of this convergence paradigm in the broad ecosystem of brain science, which provides a real-time testbed for evaluating two modes of cross-domain integration - subject area exploration via expansive learning and cross-disciplinary collaboration among doma…
▽ More
To address complex problems, scholars are increasingly faced with challenges of integrating diverse knowledge domains. We analyzed the evolution of this convergence paradigm in the broad ecosystem of brain science, which provides a real-time testbed for evaluating two modes of cross-domain integration - subject area exploration via expansive learning and cross-disciplinary collaboration among domain experts. We show that research involving both modes features a 16% citation premium relative to a mono-disciplinary baseline. Further comparison of research integrating neighboring versus distant research domains shows that the cross-disciplinary mode is essential for integrating across relatively large disciplinary distances. Yet we find research utilizing cross-domain subject area exploration alone - a convergence shortcut - to be growing in prevalence at roughly 3% per year, significantly faster than the alternative cross-disciplinary mode, despite being less effective at integrating domains and markedly less impactful. By measuring shifts in the prevalence and impact of different convergence modes in the 5-year intervals before and after 2013, our results indicate that these counterproductive patterns may relate to competitive pressures associated with global Human Brain flagship funding initiatives. Without additional policy guidance, such Grand Challenge flagships may unintentionally incentivize such convergence shortcuts, thereby undercutting the advantages of cross-disciplinary teams in tackling challenges calling on convergence.
△ Less
Submitted 21 March, 2021;
originally announced March 2021.
-
Resolvent analysis of stratification effects on wall-bounded shear flows
Authors:
M. A. Ahmed,
H. J. Bae,
A. F. Thompson,
B. J. McKeon
Abstract:
The interaction between shear driven turbulence and stratification is a key process in a wide array of geophysical flows with spatio-temporal scales that span many orders of magnitude. A quick numerical model prediction based on external parameters of stratified boundary layers could greatly benefit the understanding of the interaction between velocity and scalar flux at varying scales. For these…
▽ More
The interaction between shear driven turbulence and stratification is a key process in a wide array of geophysical flows with spatio-temporal scales that span many orders of magnitude. A quick numerical model prediction based on external parameters of stratified boundary layers could greatly benefit the understanding of the interaction between velocity and scalar flux at varying scales. For these reasons, here, we use the resolvent framework to investigate the effects of an active scalar on incompressible wall-bounded turbulence. We obtain the state of the flow system by applying the linear resolvent operator to the nonlinear terms in the governing Navier-Stokes equations with the Boussinesq approximation. This extends the formulation to include the scalar advection equation with the scalar component acting in the wall-normal direction in the momentum equations. We use the mean velocity profiles from a DNS of a stably-stratified turbulent channel flow at varying friction Richardson number. The results obtained from the resolvent analysis are compared to the premultiplied energy spectra, auto-correlation coefficient, and the energy budget terms obtained from the DNS. It is shown that despite using only a very limited range of representative scales, the resolvent model is able to reproduce the balance of energy budget terms as well as provide meaningful insight of coherent structures occurring in the flow. Computation of the leading resolvent models, despite considering a limited range of scales, reproduces the balance of energy budget terms, provides meaningful predictions of coherent structures in the flow, and is more cost-effective than performing full-scale simulations. This quick model can provide further understanding of stratified flows with only information about the mean profile and prior knowledge of energetic scales of motion in the neutrally-buoyant boundary layers.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
Influence of Asymmetric Gain Suppression on Relative Intensity Noise Properties of Multimode Semiconductor Lasers
Authors:
Ahmed Bakry,
Ahmed Alshahrie,
Alaa Mahmoud,
Hamed Dalir,
Moustafa Ahmed
Abstract:
We introduce modeling and simulation of the noise properties associated with types of modal oscillations induced by scaling the asymmetric gain suppression (AGS) in multimode semiconductor lasers. The study is based on numerical integration of a system of rate equations of 21-oscillating modes taking account of the self- and cross-modal gain suppression mechanisms. AGS is varied in terms of a pre-…
▽ More
We introduce modeling and simulation of the noise properties associated with types of modal oscillations induced by scaling the asymmetric gain suppression (AGS) in multimode semiconductor lasers. The study is based on numerical integration of a system of rate equations of 21-oscillating modes taking account of the self- and cross-modal gain suppression mechanisms. AGS is varied in terms of a pre-defined parameter, which is controlled by the linewidth enhancement factor and differential gain. Basing on intensive simulation of the mode dynamics, we present a map** (AGS versus current) diagram of the possible types of modal oscillations. When the laser oscillation is hop** multimode oscillation (HMMO), the spectra of relative intensity noise (RIN) of the total output and hop** modes are characterized by a sharp peak around the relaxation oscillation (RO) frequency and a broad peak around the hop** frequency. The levels of RIN in the regimes of single-mode oscillation (SMO) are much lower than those under HMMO, and the mode-partition noise is two order of magnitudes lower.
△ Less
Submitted 25 December, 2020;
originally announced December 2020.
-
Stabilizing Multimode Hop** Oscillations and Reducing Associated Noise in Long Wavelength Laser Diode Using External Optical Feedback
Authors:
Moustafa Ahmed,
Ahmed Bakry,
Ahmed Alshahrie,
Hamed Dalir
Abstract:
We report on converting the multimode hop** oscillation (MHO) in long-wavelength semiconductor laser into single-mode oscillation (SMO) by applying external optical feedback (OFB). We characterize and compare the noise performance of the laser when supporting SMO and multimode oscillations. The study is based on a modified time-delay multimode rate-equation model of the laser that includes mecha…
▽ More
We report on converting the multimode hop** oscillation (MHO) in long-wavelength semiconductor laser into single-mode oscillation (SMO) by applying external optical feedback (OFB). We characterize and compare the noise performance of the laser when supporting SMO and multimode oscillations. The study is based on a modified time-delay multimode rate-equation model of the laser that includes mechanisms of spectral gain suppression along with OFB induced due to multiple reflections by an external reflector. The study is applied to 1.55um-InGaAsP laser that exhibits multimode hop** in its solitary version and supports wide bandwidth. The noise is evaluated in terms of the relative intensity noise (RIN). We show that when OFB synchronizes with the asymmetric gain suppression (AGS), it enhances the gain of one longer wavelength mode and supports SMO. In this case OFB improves the noise performance of the laser. On the other hand, when OFB works against AGS, it sustains hop** multimode oscillation (HMMO) and deteriorates the side-mode suppression ratio (SMSR) and the noise performance.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Transverse Coupled Cavity VCSEL: Making 100 GHz Bandwidth Achievable
Authors:
Moustafa Ahmed,
Ahmed Bakry,
Ahmed Alshahrie,
Hamed Dalir
Abstract:
Enhancing the modulation bandwidth (MBW) of semiconductor lasers has been the challenge of research and technology to meet the need of high-speed photonic applications. In this paper, we propose the design of vertical-cavity surface-emitting laser integrated with multiple transverse coupled cavities (MTCCs) as a promising device with ultra-high 3-dB bandwidth. The laser features high modulation pe…
▽ More
Enhancing the modulation bandwidth (MBW) of semiconductor lasers has been the challenge of research and technology to meet the need of high-speed photonic applications. In this paper, we propose the design of vertical-cavity surface-emitting laser integrated with multiple transverse coupled cavities (MTCCs) as a promising device with ultra-high 3-dB bandwidth. The laser features high modulation performance because of the accumulated strong coupling of the slow-light feedback from the surrounding lateral TCCs into the VCSEL cavity. Photon-photon resonance (PPR) is predicted to occur at ultra-high frequencies exceeding 145 GHz due to the optical feedback from short TCCs, which achieves 3-dB MBW reaching 170 GHz. The study is based on the modeling of the VCSEL dynamics under multiple transverse slow-light feedback from the surrounding TCCs. We show that the integration of the VCSEL with four or six feedback cavities is advantageous over the TCC-VCSEL in achieving much higher MBW enhancement under weaker coupling of slow-light into the VCSEL cavity. We also characterize the noise properties of the promising MTCC-VCSEL in the regime of ultra-high bandwidth in terms of the Fourier spectrum of the relative intensity noise (RIN).
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Structure, Electrical and Optical Properties of ITO Thin Films and their Influence on Performance of CdS/CdTe Thin-Film Solar Cells
Authors:
Moustafa Ahmed,
Ahmed Bakry,
Essam R. Shaaban,
Hamed Dalir
Abstract:
In terms of mixing graded TiO2 and SnO2 powders by solid-state reaction method, ITO was prepared. Using electron beam gun technology, ITO films with different thicknesses were prepared. The influence of film thickness on structure, electrical and optical properties was studied. The XRD patterns were utilized to determine the structural parameters (lattice strain and crystallite size) of ITO with d…
▽ More
In terms of mixing graded TiO2 and SnO2 powders by solid-state reaction method, ITO was prepared. Using electron beam gun technology, ITO films with different thicknesses were prepared. The influence of film thickness on structure, electrical and optical properties was studied. The XRD patterns were utilized to determine the structural parameters (lattice strain and crystallite size) of ITO with different thicknesses. It is observed that the average crystallite size increases as the film thickness increases, but the lattice strain decreases. SEM shows that as the film thickness increases, the grain size of ITO increases and improves. The electrical properties of ITO films with different thicknesses were measured by the standard four-point probe method. It can be seen that as the thickness of the ITO film increases from 75 nm to 325 nm, the resistivity decreases from 29x10^-4 Ohm/cm to 1.65x10^-4 Ohm/cm. This means that ITO films with lower electrical properties will be more suitable for high-efficiency CdTe solar cells. Three optical layer models (adhesive layer of the substrate/B-spline layer of ITO film/surface roughness layer) are used to calculate the film thickness with high-precision ellipsometry. In the higher T(lambda) and R(lambda) absorption regions, the absorption coefficient is determined to calculate the optical energy gap, which increases from 3.56 eV to 3.69 eV. Finally, the effects of ITO layers of various thicknesses on the performance of CdS/CdTe solar cells are also studied. When the thickness of the ITO window layer is 325 nm, Voc = 0.82 V, Jsc = 17 mA/cm2, and FF = 57.4%, the highest power conversion efficiency (PCE) is 8.6%.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
International Workshop on Next Generation Gamma-Ray Source
Authors:
C. R. Howell,
M. W. Ahmed,
A. Afanasev,
D. Alesini,
J. R. M. Annand,
A. Aprahamian,
D. L. Balabanski,
S. V. Benson,
A. Bernstein,
C. R. Brune,
J. Byrd,
B. E. Carlsten,
A. E. Champagne,
S. Chattopadhyay,
D. Davis,
E. J. Downie,
M. J. Durham,
G. Feldman,
H. Gao,
C. G. R. Geddes,
H. W. Griesshammer,
R. Hajima,
H. Hao,
D. Hornidge,
J. Isaak
, et al. (28 additional authors not shown)
Abstract:
A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To an…
▽ More
A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To anchor the scientific vision to realistically achievable beam specifications using proven technologies, the workshop brought together experts in the fields of electron accelerators, lasers, and optics to examine the technical options for achieving the beam specifications required by the most compelling parts of the proposed research programs. An international assembly of participants included current and prospective $γ$-ray beam users, accelerator and light-source physicists, and federal agency program managers. Sessions were organized to foster interactions between the beam users and facility developers, allowing for information sharing and mutual feedback between the two groups. The workshop findings and recommendations are summarized in this whitepaper.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.
-
The upgrade of the ALICE TPC with GEMs and continuous readout
Authors:
J. Adolfsson,
M. Ahmed,
S. Aiola,
J. Alme,
T. Alt,
W. Amend,
F. Anastasopoulos,
C. Andrei,
M. Angelsmark,
V. Anguelov,
A. Anjam,
H. Appelshäuser,
V. Aprodu,
O. Arnold,
M. Arslandok,
D. Baitinger,
M. Ball,
G. G. Barnaföldi,
E. Bartsch,
P. Becht,
R. Bellwied,
A. Berdnikova,
M. Berger,
N. Bialas,
P. Bialas
, et al. (210 additional authors not shown)
Abstract:
The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous re…
▽ More
The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020.
△ Less
Submitted 25 March, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Optimum design of tracking bifacial solar farms -- A comprehensive global analysis of next-generation PV
Authors:
M. Tahir Patel,
M. Sojib Ahmed,
Hassan Imran,
Nauman Z. Butt,
M. Ryyan Khan,
Muhammad A. Alam
Abstract:
The bifacial gain of East-West vertical and South-facing optimally-tilted bifacial farms are well established. One wonders if bifacial gain (and the associated LCOE) may be further improved by tracking the sun. Tracking bifacial PV has advantages of improved temperature sensitivity, enhanced diffuse and albedo light collection, flattened energy-output, reduced soiling, etc. Monofacial tracking alr…
▽ More
The bifacial gain of East-West vertical and South-facing optimally-tilted bifacial farms are well established. One wonders if bifacial gain (and the associated LCOE) may be further improved by tracking the sun. Tracking bifacial PV has advantages of improved temperature sensitivity, enhanced diffuse and albedo light collection, flattened energy-output, reduced soiling, etc. Monofacial tracking already provides many of these advantages, therefore the relative merits of bifacial tracking are not obvious. In this paper, we use a detailed illumination and temperature-dependent bifacial solar farm model to show that bifacial tracking PV delivers up to 45% energy gain when compared to fixed-tilt bifacial PV near the equator, and ~10% bifacial energy gain over tracking monofacial farm with an albedo of 0.5. An optimum pitch further improves the gain of a tracking bifacial farm. Our results will broaden the scope and understanding of bifacial technology by demonstrating global trends in energy gain for worldwide deployment.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Data-driven Inferences of Agency-level Risk and Response Communication on COVID-19 through Social Media based Interactions
Authors:
Md Ashraf Ahmed,
Arif Mohaimin Sadri,
M. Hadi Amini
Abstract:
Risk and response communication of public agencies through social media played a significant role in the emergence and spread of novel Coronavirus (COVID-19) and such interactions were echoed in other information outlets. This study collected time-sensitive online social media data and analyzed such communication patterns from public health (WHO, CDC), emergency (FEMA), and transportation (FDOT) a…
▽ More
Risk and response communication of public agencies through social media played a significant role in the emergence and spread of novel Coronavirus (COVID-19) and such interactions were echoed in other information outlets. This study collected time-sensitive online social media data and analyzed such communication patterns from public health (WHO, CDC), emergency (FEMA), and transportation (FDOT) agencies using data-driven methods. The scope of the work includes a detailed understanding of how agencies communicate risk information through social media during a pandemic and influence community response (i.e. timing of lockdown, timing of reopening) and disease outbreak indicators (i.e. number of confirmed cases, number of deaths). The data includes Twitter interactions from different agencies (2.15K tweets per agency on average) and crowdsourced data (i.e. Worldometer) on COVID-19 cases and deaths were observed between February 21, 2020 and June 06, 2020. Several machine learning techniques such as (i.e. topic mining and sentiment ratings over time) are applied here to identify the dynamics of emergent topics during this unprecedented time. Temporal infographics of the results captured the agency-levels variations over time in circulating information about the importance of face covering, home quarantine, social distancing and contact tracing. In addition, agencies showed differences in their discussions about community transmission, lack of personal protective equipment, testing and medical supplies, use of tobacco, vaccine, mental health issues, hospitalization, hurricane season, airports, construction work among others. Findings could support more efficient transfer of risk and response information as communities shift to new normal as well as in future pandemics.
△ Less
Submitted 9 August, 2020;
originally announced August 2020.
-
Hexagonal Transverse Coupled Cavity VCSEL Redefining the High-Speed Lasers
Authors:
Elham Heidari,
Hamed Dalir,
Moustafa Ahmed,
Volker J. Sorger,
Ray T. Chen
Abstract:
The vertical-cavity surface-emitting lasers (VCSELs) have emerged as a vital approach for realizing energy efficient, high speed optical interconnects in the data center and supercomputers. As of today, VCSEL is the most suitable for mass production in terms of cost-effectiveness and reliability. However, there are still key challenges for higher speed modulation above 40 GHz. Here, a hexagonal tr…
▽ More
The vertical-cavity surface-emitting lasers (VCSELs) have emerged as a vital approach for realizing energy efficient, high speed optical interconnects in the data center and supercomputers. As of today, VCSEL is the most suitable for mass production in terms of cost-effectiveness and reliability. However, there are still key challenges for higher speed modulation above 40 GHz. Here, a hexagonal transverse coupled cavity VCSEL adiabatically coupled through the center cavity is proposed. A 3-dB roll-off modulation bandwidth of 45 GHz is demonstrated, which is five times greater than a conventional VCSEL fabricated on the same epi-wafer structure. While a parity time (PT) symmetry approaches add loss to engineer the topological state of the laser system, here, a radical paradigm shift with gain introduces symmetry breaking. This idea, then enables a single mode operation with a side-mode suppression-ratio (SMSR) of > 30 decibels and signal-to-noise ratio (SNR) of > 45 decibels. The energy distribution inside the coupled cavity system is also redistributed to provide a coherent gain in a spatially separated system. Consequently, throughput power is three times higher than that of the conventional VCSEL.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Integrated Photonic FFT for Optical Convolutions towards Efficient and High-Speed Neural Networks
Authors:
Moustafa Ahmed,
Yas Al-Hadeethi,
Ahmed Bakry,
Hamed Dalir,
Volker J. Sorger
Abstract:
The technologically-relevant task of feature extraction from data performed in deep-learning systems is routinely accomplished as repeated fast Fourier transforms (FFT) electronically in prevalent domain-specific architectures such as in graphics processing units (GPUs). However, electronics systems are limited with respect to power dissipation and delay, both, due to wire-charging challenges rela…
▽ More
The technologically-relevant task of feature extraction from data performed in deep-learning systems is routinely accomplished as repeated fast Fourier transforms (FFT) electronically in prevalent domain-specific architectures such as in graphics processing units (GPUs). However, electronics systems are limited with respect to power dissipation and delay, both, due to wire-charging challenges related to interconnect capacitance. Here we present a silicon photonics-based architecture for convolutional neural networks that harnesses the phase property of light to perform FFTs efficiently by executing the convolution as a multiplication in the Fourier-domain. The algorithmic executing time is determined by the time-of-flight of the signal through this photonic reconfigurable passive FFT filter circuit and is on the order of 10s of picosecond. A sensitivity analysis shows that this optical processor must be thermally phase stabilized corresponding to a few degrees. Furthermore, we find that for a small sample number, the obtainable number of convolutions per {time-power-chip area) outperforms GPUs by about 2 orders of magnitude. Lastly, we show that, conceptually, the optical FFT and convolution-processing performance is indeed directly linked to optoelectronic device-level, and improvements in plasmonics, metamaterials or nanophotonics are fueling next generation densely interconnected intelligent photonic circuits with relevance for edge-computing 5G networks.
△ Less
Submitted 23 March, 2020; v1 submitted 1 February, 2020;
originally announced February 2020.
-
Tailoring the optical and physical properties of La doped ZnO nanostructured thin films
Authors:
Mai M. A. Ahmed,
Wael Z. Tawfik,
M. A. K. Elfayoumi,
M. Abdel-Hafiez,
S. I. El-Dek
Abstract:
The modification and tailoring the characteristics of nanostructured materials are of great interest due to controllable and unusual inherent properties in such materials. A simple spray pyrolysis technique is used to prepare pure and La-doped ZnO films. The influence of La concentration (0, 0.33, 0.45, 0.66, 0.92 and 1.04 at. %) on the structural, optical, and magnetic properties of ZnO was inves…
▽ More
The modification and tailoring the characteristics of nanostructured materials are of great interest due to controllable and unusual inherent properties in such materials. A simple spray pyrolysis technique is used to prepare pure and La-doped ZnO films. The influence of La concentration (0, 0.33, 0.45, 0.66, 0.92 and 1.04 at. %) on the structural, optical, and magnetic properties of ZnO was investigated. The exact nominal compositions of the prepared films were determined from the field emission scanning electron microscope occupied with EDX. X-ray diffraction confirmed that the samples possessed single-phase hexagonal wurtzite structure. The main crystal size was decreased from 315.50 Å to 229.04 Å depending on La dopant concentration. This decrease is due to the small ionic radius of Zn ions in compared to La ions. The band gap values were found to be depend strongly on La3+ ion content. Introducing La into ZnO induces a clear magnetic moment without any distortion in the geometrical symmetry, it also reveals the ferromagnetic coupling. The saturation magnetic moment of 1.04 at% La-doped ZnO shows the highest value of 0.014 emu, which is ~23 times higher than pure ZnO sample. The obtained results were discussed and compared with other literature data and showed an acceptable agreement.
△ Less
Submitted 21 September, 2019;
originally announced September 2019.
-
Velocity map imaging of inelastic and elastic low energy electron scattering in organic nanoparticles
Authors:
Oleg Kostko,
Michael I. Jacobs,
Bo Xu,
Kevin R. Wilson,
Musahid Ahmed
Abstract:
Electron transport is of fundamental importance, and has application in a variety of fields. Different scattering mechanisms affect electron transport in solids. It is important to comprehensively understand these mechanisms and their scattering cross-sections to predict electron transport properties. Whereas electron transport is well understood for high kinetic energy (KE) electrons, there are i…
▽ More
Electron transport is of fundamental importance, and has application in a variety of fields. Different scattering mechanisms affect electron transport in solids. It is important to comprehensively understand these mechanisms and their scattering cross-sections to predict electron transport properties. Whereas electron transport is well understood for high kinetic energy (KE) electrons, there are inconsistencies in the low KE regime. In this work, velocity map imaging soft X-ray photoelectron spectroscopy is applied to unsupported organic nanoparticles to extract experimental values of inelastic and elastic mean free paths. The obtained data is used to calculate corresponding scattering cross-sections. The data demonstrates a decrease of the Inelastic Mean Free Path and increase of the Elastic Mean Free Path with increasing electron KE between 10-50 eV.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
A New Cryogenic Apparatus to Search for the Neutron Electric Dipole Moment
Authors:
M. W. Ahmed,
R. Alarcon,
A. Aleksandrova,
S. Baessler,
L. Barron-Palos,
L. M. Bartoszek,
D. H. Beck,
M. Behzadipour,
I. Berkutov,
J. Bessuille,
M. Blatnik,
M. Broering,
L. J. Broussard,
M. Busch,
R. Carr,
V. Cianciolo,
S. M. Clayton,
M. D. Cooper,
C. Crawford,
S. A. Currie,
C. Daurer,
R. Dipert,
K. Dow,
D. Dutta,
Y. Efremenko
, et al. (69 additional authors not shown)
Abstract:
A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallati…
▽ More
A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallation Neutron Source at Oak Ridge National Laboratory, uses polarized $^3$He from an Atomic Beam Source injected into the superfluid $^4$He and transported to the measurement cells as a co-magnetometer. The superfluid $^4$He is also used as an insulating medium allowing significantly higher electric fields, compared to previous experiments, to be maintained across the measurement cells. These features provide an ultimate statistical uncertainty for the EDM of $2-3\times 10^{-28}$ e-cm, with anticipated systematic uncertainties below this level.
△ Less
Submitted 20 November, 2019; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Artificial Neural Network Algorithm based Skyrmion Material Design of Chiral Crystals
Authors:
B. U. V Prashanth,
Mohammed Riyaz Ahmed
Abstract:
The model presented in this research predicts ideal chiral crystal and propose a new direction of designing chiral crystals. Skyrmions are topologically protected and structurally assymetric materials with an exotic spin composition. This work presents deep learning method for skyrmion material design of chiral crystals. This paper presents an approach to construct a probabilistic classifier and a…
▽ More
The model presented in this research predicts ideal chiral crystal and propose a new direction of designing chiral crystals. Skyrmions are topologically protected and structurally assymetric materials with an exotic spin composition. This work presents deep learning method for skyrmion material design of chiral crystals. This paper presents an approach to construct a probabilistic classifier and an Artificial Neural Network(ANN) from a true or false chirality dataset consisting of chiral and achiral compounds with 'A' and 'B' type elements. A quantitative predictor for accuracy of forming the chiral crystals is illustrated. The feasibility of ANN method is tested in a comprehensive manner by comparing with probalistic classifier method. Throughout this manuscript we present deep learnig algorithm design with modelling and simulations of materials. This research work elucidated paves a way to develop sophisticated software tool to make an indicator of crystal design.
△ Less
Submitted 19 July, 2019;
originally announced July 2019.
-
The neutron electric dipole moment experiment at the Spallation Neutron Source
Authors:
K. K. H. Leung,
M. Ahmed,
R. Alarcon,
A. Aleksandrova,
S. Baeßler,
L. Barrón-Palos,
L. Bartoszek,
D. H. Beck,
M. Behzadipour,
J. Bessuille,
M. A. Blatnik,
M. Broering,
L. J. Broussard,
M. Busch,
R. Carr,
P. -H. Chu,
V. Cianciolo,
S. M. Clayton,
M. D. Cooper,
C. Crawford,
S. A. Currie,
C. Daurer,
R. Dipert,
K. Dow,
D. Dutta
, et al. (68 additional authors not shown)
Abstract:
Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarize…
▽ More
Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarized $^3$He, and superfluid $^4$He will be exploited to provide a sensitivity to $\sim 10^{-28}\,e{\rm \,\cdot\, cm}$. Our cryogenic apparatus will deploy two small ($3\,{\rm L}$) measurement cells with a high density of ultracold neutrons produced and spin analyzed in situ. The electric field strength, precession time, magnetic shielding, and detected UCN number will all be enhanced compared to previous room temperature Ramsey measurements. Our $^3$He co-magnetometer offers unique control of systematic effects, in particular the Bloch-Siegert induced false EDM. Furthermore, there will be two distinct measurement modes: free precession and dressed spin. This will provide an important self-check of our results. Following five years of "critical component demonstration," our collaboration transitioned to a "large scale integration" phase in 2018. An overview of our measurement techniques, experimental design, and brief updates are described in these proceedings.
△ Less
Submitted 4 October, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Time Projection Chamber (TPC) Detectors for Nuclear Astrophysics Studies With Gamma Beams
Authors:
M. Gai,
D. Schweitzer,
S. R. Stern,
A. H. Young,
R. Smith,
M. Cwiok,
J. S. Bihalowicz,
H. Czyrkowski,
R. Dabrowski,
W. Dominik,
A. Fijalkowska,
Z. Janas,
L. Janiak,
A. Korgul,
T. Matulewicz,
C. Mazzocchi,
M. Pfuetzner,
M. Zaremba,
D. Balabanski,
I. Gheorghe,
C. Matei,
O. Tesileanu,
N. V. Zamfir,
M. W. Ahmed,
S. S. Henshaw
, et al. (11 additional authors not shown)
Abstract:
Gamma-Beams at the HIgS facility in the USA and anticipated at the ELI-NP facility, now constructed in Romania, present unique new opportunities to advance research in nuclear astrophysics; not the least of which is resolving open questions in oxygen formation during stellar helium burning via a precise measurement of the 12C(a,g) reaction. Time projection chamber (TPC) detectors operating with lo…
▽ More
Gamma-Beams at the HIgS facility in the USA and anticipated at the ELI-NP facility, now constructed in Romania, present unique new opportunities to advance research in nuclear astrophysics; not the least of which is resolving open questions in oxygen formation during stellar helium burning via a precise measurement of the 12C(a,g) reaction. Time projection chamber (TPC) detectors operating with low pressure gas (as an active target) are ideally suited for such studies. We review the progress of the current research program and plans for the future at the HIγS facility with the optical readout TPC (O-TPC) and the development of an electronic readout TPC for the ELI-NP facility (ELITPC).
△ Less
Submitted 22 December, 2018;
originally announced December 2018.
-
The next generation of laser spectroscopy experiments using light muonic atoms
Authors:
S. Schmidt,
M. Willig,
J. Haack,
R. Horn,
A. Adamczak,
M. Abdou Ahmed,
F. D. Amaro,
P. Amaro,
F. Biraben,
P. Carvalho,
T. -L. Chen,
L. M. P. Fernandes,
T. Graf,
M. Guerra,
T. W. Hänsch,
M. Hildebrandt,
Y. -C. Huang,
P. Indelicato,
L. Julien,
K. Kirch,
A. Knecht,
F. Kottmann,
J. J. Krauth,
Y. -W. Liu,
J. Machado
, et al. (19 additional authors not shown)
Abstract:
Precision spectroscopy of light muonic atoms provides unique information about the atomic and nuclear structure of these systems and thus represents a way to access fundamental interactions, properties and constants. One application comprises the determination of absolute nuclear charge radii with unprecedented accuracy from measurements of the 2S$\,$-$\,$2P Lamb shift. Here, we review recent resu…
▽ More
Precision spectroscopy of light muonic atoms provides unique information about the atomic and nuclear structure of these systems and thus represents a way to access fundamental interactions, properties and constants. One application comprises the determination of absolute nuclear charge radii with unprecedented accuracy from measurements of the 2S$\,$-$\,$2P Lamb shift. Here, we review recent results of nuclear charge radii extracted from muonic hydrogen and helium spectroscopy and present experiment proposals to access light muonic atoms with $Z \geq 3$. In addition, our approaches towards a precise measurement of the Zemach radii in muonic hydrogen ($μ$p) and helium ($μ$$^{3}$He$^{+}$) are discussed. These results will provide new tests of bound-state quantum-electrodynamics in hydrogen-like systems and can be used as benchmarks for nuclear structure theories.
△ Less
Submitted 22 August, 2018;
originally announced August 2018.
-
An artificial neural network framework for reduced order modeling of transient flows
Authors:
Omer San,
Romit Maulik,
Mansoor Ahmed
Abstract:
This paper proposes a supervised machine learning framework for the non-intrusive model order reduction of unsteady fluid flows to provide accurate predictions of non-stationary state variables when the control parameter values vary. Our approach utilizes a training process from full-order scale direct numerical simulation data projected on proper orthogonal decomposition (POD) modes to achieve an…
▽ More
This paper proposes a supervised machine learning framework for the non-intrusive model order reduction of unsteady fluid flows to provide accurate predictions of non-stationary state variables when the control parameter values vary. Our approach utilizes a training process from full-order scale direct numerical simulation data projected on proper orthogonal decomposition (POD) modes to achieve an artificial neural network (ANN) model with reduced memory requirements. This data-driven ANN framework allows for a nonlinear time evolution of the modal coefficients without performing a Galerkin projection. Our POD-ANN framework can thus be considered an equation-free approach for latent space dynamics evolution of nonlinear transient systems and can be applied to a wide range of physical and engineering applications. Within this framework we introduce two architectures, namely sequential network (SN) and residual network (RN), to train the trajectory of modal coefficients. We perform a systematic analysis of the performance of the proposed reduced order modeling approaches on prediction of a nonlinear wave-propagation problem governed by the viscous Burgers equation, a simplified prototype setting for transient flows. We find that the POD-ANN-RN yields stable and accurate results for test problems assessed both within inside and outside of the database range and performs significantly better than the standard intrusive Galerkin projection model. Our results show that the proposed framework provides a non-intrusive alternative to the evolution of transient physics in a POD basis spanned space, and can be used as a robust predictive model order reduction tool for nonlinear dynamical systems.
△ Less
Submitted 24 April, 2019; v1 submitted 26 February, 2018;
originally announced February 2018.
-
Fiber-integrated spectroscopy device for hot alkali vapor
Authors:
Josephine Gutekunst,
Daniel Weller,
Harald Kübler,
Jan-Philipp Negel,
Marwan Abdou Ahmed,
Thomas Graf,
Robert Löw
Abstract:
We introduce an all-glass, vacuum tight, fiber-integrated and alkali compatible spectroscopy device consisting of two conventional optical fibers spliced to each end of a capillary. This is mainly realized through a decentered splicing method allowing refilling of the capillary and controlling the vapor density inside. We analyze the light guidance of the setup through simulations and measurements…
▽ More
We introduce an all-glass, vacuum tight, fiber-integrated and alkali compatible spectroscopy device consisting of two conventional optical fibers spliced to each end of a capillary. This is mainly realized through a decentered splicing method allowing refilling of the capillary and controlling the vapor density inside. We analyze the light guidance of the setup through simulations and measurements of the transmission efficiency at different wavelengths and show that filling it with highly reactive alkali metals is possible, and that the vapor density can be controlled reliably.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
Magnetic properties of photosynthetic materials - a nano scale study
Authors:
Abhishek Bhattacharya,
Sufi O Raja,
Md. A Ahmed,
Sudip Bandyopadhyay,
Anjan Kr. Dasgupta
Abstract:
Photosynthetic materials form the basis of quantum biology. An important attribute of quantum biology is correlation and coherence of spin states. Such correlated spin states are targets of static magnetic field. In this paper, we report magnetic properties and spectroscopically realizable static magnetic field effect in photosynthetic materials. Two classes of nano-scale assembly of chlorophyll (…
▽ More
Photosynthetic materials form the basis of quantum biology. An important attribute of quantum biology is correlation and coherence of spin states. Such correlated spin states are targets of static magnetic field. In this paper, we report magnetic properties and spectroscopically realizable static magnetic field effect in photosynthetic materials. Two classes of nano-scale assembly of chlorophyll (NC) are used for such a study. Magnetic measurements are made using a superconducting quantum interference device (SQUID). Both ferromagnetic and superparamagnetic states are observed in NC along with a blocking temperature around 250 K. Low temperature quantum (liquid nitrogen) spectroscopy is employed to see how optical transitions are affected in presence of static magnetic field. Plausible practical application aspects of magnetic properties of this optically active material are discussed in the text.
△ Less
Submitted 10 June, 2017;
originally announced June 2017.
-
New equilibrium solution branches of plane Couette flow discovered using a project-then-search method
Authors:
Muhammad Arslan Ahmed,
Ati Sharma
Abstract:
New equilibrium solution branches for plane Couette flow are reported which add to the inventory of known solution branches. The exact solutions are found by projecting known equilibria onto the resolvent modes of McKeon & Sharma (J. Fl. Mech., vol. 658, 2010, pp. 336-382) to generate approximate solutions that are subsequently used as seeds in a Newton-Krylov-hookstep search. Searches initialised…
▽ More
New equilibrium solution branches for plane Couette flow are reported which add to the inventory of known solution branches. The exact solutions are found by projecting known equilibria onto the resolvent modes of McKeon & Sharma (J. Fl. Mech., vol. 658, 2010, pp. 336-382) to generate approximate solutions that are subsequently used as seeds in a Newton-Krylov-hookstep search. Searches initialised with these projections have a convergence rate of 96%, leading to the discovery of 16 new equilibria. The low-dimensional nature of the resulting equilibria is attributed to the projection generated by the resolvent model; resolvent modes for a given equilibrium solution span a low-dimensional space which the solution approximately inhabits. This property is exploited to generate new branches of equilibria in plane Couette flow, and to jump to known branches. The new branches include bifurcations from previously known bifurcation curves and a disconnected bifurcation curve which displays interesting behaviour when continued in Reynolds number. The unstable manifolds of the new exact coherent states are also computed to expand the known state space structure of plane Couette flow.
△ Less
Submitted 16 June, 2017;
originally announced June 2017.
-
The proton radius puzzle
Authors:
J. J. Krauth,
K. Schuhmann,
M. Abdou Ahmed,
F. D. Amaro,
P. Amaro,
F. Biraben,
J. M. R. Cardoso,
M. L. Carvalho,
D. S. Covita,
A. Dax,
S. Dhawan,
M. Diepold,
L. M. P. Fernandes,
B. Franke,
S. Galtier,
A. Giesen,
A. L. Gouvea,
J. Götzfried,
T. Graf,
M. Guerra,
J. Haack,
T. W. Hänsch,
M. Hildebrandt,
P. Indelicato,
L. Julien
, et al. (27 additional authors not shown)
Abstract:
High-precision measurements of the proton radius from laser spectroscopy of muonic hydrogen demonstrated up to six standard deviations smaller values than obtained from electron-proton scattering and hydrogen spectroscopy. The status of this discrepancy, which is known as the proton radius puzzle will be discussed in this paper, complemented with the new insights obtained from spectroscopy of muon…
▽ More
High-precision measurements of the proton radius from laser spectroscopy of muonic hydrogen demonstrated up to six standard deviations smaller values than obtained from electron-proton scattering and hydrogen spectroscopy. The status of this discrepancy, which is known as the proton radius puzzle will be discussed in this paper, complemented with the new insights obtained from spectroscopy of muonic deuterium.
△ Less
Submitted 19 August, 2017; v1 submitted 2 June, 2017;
originally announced June 2017.
-
Laser Spectroscopy of Muonic Atoms and Ions
Authors:
Randolf Pohl,
François Nez,
Luis M. P. Fernandes,
Marwan Abdou Ahmed,
Fernando D. Amaro,
Pedro Amaro,
François Biraben,
João M. R. Cardoso,
Daniel S. Covita,
Andreas Dax,
Satish Dhawan,
Marc Diepold,
Beatrice Franke,
Sandrine Galtier,
Adolf Giesen,
Andrea L. Gouvea,
Johannes Götzfried,
Thomas Graf,
Theodor W. Hänsch,
Malte Hildebrandt,
Paul Indelicato,
Lucile Julien,
Klaus Kirch,
Andreas Knecht,
Paul Knowles
, et al. (22 additional authors not shown)
Abstract:
Laser spectroscopy of the Lamb shift (2S-2P energy difference) in light muonic atoms or ions, in which one negative muon $μ^-$ is bound to a nucleus, has been performed. The measurements yield significantly improved values of the root-mean-square charge radii of the nuclei, owing to the large muon mass, which results in a vastly increased muon wave function overlap with the nucleus. The values of…
▽ More
Laser spectroscopy of the Lamb shift (2S-2P energy difference) in light muonic atoms or ions, in which one negative muon $μ^-$ is bound to a nucleus, has been performed. The measurements yield significantly improved values of the root-mean-square charge radii of the nuclei, owing to the large muon mass, which results in a vastly increased muon wave function overlap with the nucleus. The values of the proton and deuteron radii are 10 and 3 times more accurate than the respective CODATA values, but 7 standard deviations smaller. Data on muonic helium-3 and -4 ions is being analyzed and will give new insights. In future, the (magnetic) Zemach radii of the proton and the helium-3 nuclei will be determined from laser spectroscopy of the 1S hyperfine splittings, and the Lamb shifts of muonic Li, Be and B can be used to improve the respective charge radii.
△ Less
Submitted 12 September, 2016;
originally announced September 2016.
-
Thin-disk laser multi-pass amplifier
Authors:
K. Schuhmann,
M. A. Ahmed,
T. Graf,
T. W. Hänsch,
K. Kirch,
F. Kottmann,
R. Pohl,
D. Taqqu,
A. Voß,
B. Weichelt,
A. Antognini
Abstract:
In the context of the Lamb shift measurement in muonic helium we developed a thin-disk laser composed of a Q-switched oscillator and a multi-pass amplifier delivering pulses of 150 mJ at a pulse duration of 100 ns. Its peculiar requirements are stochastic trigger and short delay time (< 500 ns) between trigger and optical output. The concept of the thin-disk laser allows for energy and power scali…
▽ More
In the context of the Lamb shift measurement in muonic helium we developed a thin-disk laser composed of a Q-switched oscillator and a multi-pass amplifier delivering pulses of 150 mJ at a pulse duration of 100 ns. Its peculiar requirements are stochastic trigger and short delay time (< 500 ns) between trigger and optical output. The concept of the thin-disk laser allows for energy and power scaling with high efficiency. However the single pass gain is small (about 1.2). Hence a multi-pass scheme with precise mode matching for large beam waists (w = 2 mm) is required. Instead of using the standard 4f design, we have developed a multi-pass amplifier with a beam propagation insensitive to thermal lens effects and misalignments. The beam propagation is equivalent to multiple roundtrips in an optically stable resonator. To support the propagation we used an array of 2 x 8 individually adjustable plane mirrors. Astigmatism has been minimized by a compact mirror placement. Precise alignment of the kinematic array was realized using our own mirror mount design. A small signal gain of 5 for 8 passes at a pump power of 400 W was reached. The laser was running for more than 3 months without the need of realignment. Pointing stability studies is also reported here.
△ Less
Submitted 18 September, 2015;
originally announced September 2015.
-
Searching for a highly unlikely frame dependent speed of light using a one-way test
Authors:
Md. Farid Ahmed,
Brendan M. Quine,
Spiros Pagiatakis,
A. D. Stauffer
Abstract:
At first blush, what appears to be a purely physical question to measure any velocity: how to measure the velocity on a one-way trip? However, due to the debates of the clock-synchronization and the successes of Special Relativity (SR), searching of the possibility of one-way speed of light measurement did not receive wider attention since the declaration of the constancy of the speed of light in…
▽ More
At first blush, what appears to be a purely physical question to measure any velocity: how to measure the velocity on a one-way trip? However, due to the debates of the clock-synchronization and the successes of Special Relativity (SR), searching of the possibility of one-way speed of light measurement did not receive wider attention since the declaration of the constancy of the speed of light in vacuum by Maxwell's Electrodynamics in 1864. However, our analysis suggests that the debates of the clock synchronization are insignificant when one uses a one-way experiment to test the isotropy of the speed of light - the fundamental postulate of SR. Searching of the possibility of one-way speed of light to test SR is introduced by reviewing recent one-way tests.
△ Less
Submitted 16 October, 2013;
originally announced October 2013.
-
In Silico Design, Extended Molecular Dynamic Simulations and Binding Energy Calculations for a New Series of Dually Acting Inhibitors against EGFR and HER2
Authors:
Marawan Ahmed,
Maiada M. Sadek,
Khaled A. Abouzid,
Feng Wang
Abstract:
Starting from the lead structure we have identified in our previous works, we are extending our insight understanding of its potential inhibitory effect against both EGFR and HER2 receptors. Herein and using extended molecular dynamic simulations and different scoring techniques, we are providing plausible explanations for the observed inhibitory effect. Also, we are comparing the binding mechanis…
▽ More
Starting from the lead structure we have identified in our previous works, we are extending our insight understanding of its potential inhibitory effect against both EGFR and HER2 receptors. Herein and using extended molecular dynamic simulations and different scoring techniques, we are providing plausible explanations for the observed inhibitory effect. Also, we are comparing the binding mechanism in addition to the dynamics of binding with two other approved inhibitors against EGFR (Lapatinib) and HER2 (SYR). Based on this information, we are also designing and in silico screening new potential inhibitors sharing the same scaffold of the lead structure. We have chosen the best scoring inhibitor for additional in silico investigation against both the wild-type and T790M mutant strain of EGFR. It seems that certain substitution pattern guarantees the binding to the conserved water molecule commonly observed with kinase crystal structures. Also, the new inhibitors seem to form a stable interaction with the mutant strain as a direct consequence of their enhanced ability to form additional interactions with binding site residues.
△ Less
Submitted 28 May, 2013;
originally announced May 2013.
-
A QM/MM molecular dynamic simulation and vibrational spectroscopic study of 6-azaCytidine and cytidine
Authors:
Marawan Ahmed,
Anoja P. Wickrama Arachchilage,
Feng Wang
Abstract:
The conformational and vibrational properties of 6-azaCytidine (6-azaC) and Cytidine (Cyt) have been studied in gas phase and aqueous environment. The two most stable conformers of each molecule have been identified and investigated in more details. The stability order of the two most stable conformers of both molecules is changing going from gas phase to solution. The first solvation shell of bot…
▽ More
The conformational and vibrational properties of 6-azaCytidine (6-azaC) and Cytidine (Cyt) have been studied in gas phase and aqueous environment. The two most stable conformers of each molecule have been identified and investigated in more details. The stability order of the two most stable conformers of both molecules is changing going from gas phase to solution. The first solvation shell of both molecules has been studied using QM/MM-MD (Quantum Mechanics/Molecular Mechanics-Molecular Dynamic) simulations. The Raman vibrational spectra in gas phase and aqueous solution have been simulated and compared with the available experimental data. The two molecules exhibit certain differences reflected in their spectra as a result of structural and conformational differences.
△ Less
Submitted 28 May, 2013;
originally announced May 2013.
-
Structures of cycloserine and 2-oxazolidinone probed by X-ray photoelectron spectroscopy
Authors:
Marawan Ahmed,
Feng Wang,
Robert G. Acres,
Kevin C. Prince
Abstract:
The electronic structures and properties of 2-oxazolidinone and the related compound cycloserine (CS) have been investigated using core and valence photoelectron spectroscopy and theoretical calculations. Isomerization of the central oxazolidine heterocycle and the addition of an amino group yields cycloserine. Theory correctly predicts the C, N and O 1s core spectra, and additionally we report th…
▽ More
The electronic structures and properties of 2-oxazolidinone and the related compound cycloserine (CS) have been investigated using core and valence photoelectron spectroscopy and theoretical calculations. Isomerization of the central oxazolidine heterocycle and the addition of an amino group yields cycloserine. Theory correctly predicts the C, N and O 1s core spectra, and additionally we report theoretical natural bond orbital (NBO) charges. The valence ionization energies are also in agreement with theory and previous measurements. Although the lowest binding energy part of the spectra of the two compounds show superficial similarities, analysis of the charge densities of the frontier orbitals indicates substantial reorganization of the wave functions as a result of isomerization. The Highest Occupied Molecular Orbital of CS has leading carbonyl π character with contributions from other heavy atoms in the molecule, while the Highest Occupied Molecular Orbital of 2-oxazolidinone has leading nitrogen, carbon and oxygen pπ character. At laboratory temperatures, CS is predicted to exist mainly as two low energy conformers in the gas phase, separated in energy by 4.6 kJ mol-1, whereas 2-oxazolidinone is present as a single conformer in the gas phase. However the experimental spectra do not provide proof of the presence of these conformers.....
△ Less
Submitted 28 May, 2013;
originally announced May 2013.
-
Adsorption of cytosine and aza derivatives of cytidine on Au single crystal surfaces
Authors:
M. Iakhnenko,
V. Feyer,
N. Tsud,
O. Plekan,
F. Wang,
M. Ahmed,
O. Slobodyanyuk,
R. G. Acres,
V. Matolín,
K. C. Prince
Abstract:
The adsorption of cytosine on the Au(111) and Au(110) surfaces has been studied using both aqueous deposition and evaporation in vacuum to prepare the samples. Soft X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure spectroscopy (NEXAFS) were used to determine the electronic structure and orientation of the adsorbates. In addition, three derivatives of cytosine, 6…
▽ More
The adsorption of cytosine on the Au(111) and Au(110) surfaces has been studied using both aqueous deposition and evaporation in vacuum to prepare the samples. Soft X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure spectroscopy (NEXAFS) were used to determine the electronic structure and orientation of the adsorbates. In addition, three derivatives of cytosine, 6-azacytosine, 6-azacytidine and 5- azacytidine, were studied. Monolayer films of the latter three samples were adsorbed on Au(111) from aqueous solution, and the nature of bonding was determined. Spectra have been interpreted in the light of published calculations of free cytosine molecules and new ab initio calculations of the other compounds. Surface core level shifts of Au 4f imply that all of these compounds are chemisorbed. Cytosine adsorbs as a single tautomer, but in two chemical states with different surface-molecule bonding. For deposition in vacuum, a flat-lying molecular state bonded through the N(3) atom of the pyrimidine ring dominates, but a second state is also present. For deposition from solution, the second state dominates, with the molecular plane no longer parallel to the surface. This state also bonds through the N(3) atom, but in addition interacts with the surface via the amino group. Two tautomers of 6-azacytosine were observed, and they and 6-azacytidine adsorb with similar geometries, chemically bonding via the azacytosine ring. The ribose ring does not appear to perturb the adsorption of azacytidine compared with azacytosine. The azacytosine ring is nearly but not perfectly parallel to the surface, like 5-azacytidine, which adsorbs as an imino tautomer. ...
△ Less
Submitted 19 May, 2013;
originally announced May 2013.
-
In silico investigation of lactone and thiolactone inhibitors in bacterial quorum sensing using molecular modeling
Authors:
Marawan Ahmed,
Stefanie Bird,
Feng Wang,
Enzo A. Palombo
Abstract:
In the present study, the origin of the anti-quorum sensing (QS) activities of several members of a recently synthesized and in vitro tested class of lactone and thiolactone based inhibitors were computationally investigated. Docking and molecular dynamic (MD) simulations and binding free energy calculations were carried out to reveal the exact binding and inhibitory profiles of these compounds. T…
▽ More
In the present study, the origin of the anti-quorum sensing (QS) activities of several members of a recently synthesized and in vitro tested class of lactone and thiolactone based inhibitors were computationally investigated. Docking and molecular dynamic (MD) simulations and binding free energy calculations were carried out to reveal the exact binding and inhibitory profiles of these compounds. The higher in vitro activity of the lactone series relative to their thiolactone isosteres was verified based on estimating the binding energies, the docking scores and monitoring the stability of the complexes produced in the MD simulations. The strong electrostatic contribution to the binding energies may be responsible for the higher inhibitory activity of the lactone with respect to the thiolactone series. The results of this study help to understand the anti-QS properties of lactone-based inhibitors and provide important information that may assist in the synthesis of novel QS inhibitors.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
-
A Segmented, Enriched N-type Germanium Detector for Neutrinoless Double Beta-Decay Experiments
Authors:
L. E. Leviner,
C. E. Aalseth,
M. W. Ahmed,
F. T. Avignone III,
H. O. Back,
A. S. Barabash,
M. Boswell,
L. De Braeckeleer,
V. B. Brudanin,
Y-D Chan,
V. G. Egorov,
S. R. Elliott,
V. M. Gehman,
T. W. Hossbach,
J. D. Kephart,
M. F. Kidd,
S. I. Konovalov,
K. T. Lesko,
**gyi Li,
D-M Mei,
S. Mikhailov,
H. Miley,
D. C. Radford,
J. Reeves,
V. G. Sandukovsky
, et al. (5 additional authors not shown)
Abstract:
We present data characterizing the performance of the first segmented, N-type Ge detector, isotopically enriched to 85% $^{76}$Ge. This detector, based on the Ortec PT6x2 design and referred to as SEGA (Segmented, Enriched Germanium Assembly), was developed as a possible prototype for neutrinoless double beta-decay measurements by the {\sc Majorana} collaboration. We present some of the general ch…
▽ More
We present data characterizing the performance of the first segmented, N-type Ge detector, isotopically enriched to 85% $^{76}$Ge. This detector, based on the Ortec PT6x2 design and referred to as SEGA (Segmented, Enriched Germanium Assembly), was developed as a possible prototype for neutrinoless double beta-decay measurements by the {\sc Majorana} collaboration. We present some of the general characteristics (including bias potential, efficiency, leakage current, and integral cross-talk) for this detector in its temporary cryostat. We also present an analysis of the resolution of the detector, and demonstrate that for all but two segments there is at least one channel that reaches the {\sc Majorana} resolution goal below 4 keV FWHM at 2039 keV, and all channels are below 4.5 keV FWHM.
△ Less
Submitted 19 April, 2013;
originally announced April 2013.