-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Defect-assisted reversible phase transition in mono- and few-layer ReS$_2$
Authors:
George Zograf,
Andrew B. Yankovich,
Betül Küçüköz,
Abhay V. Agrawal,
Alexander Yu. Polyakov,
Joachim Ciers,
Fredrik Eriksson,
Åsa Haglund,
Paul Erhart,
Tomasz J. Antosiewicz,
Eva Olsson,
Timur O. Shegai
Abstract:
Transition metal dichalcogenide (TMD) materials have attracted substantial interest due to their remarkable excitonic, optical, electrical, and mechanical properties, which are highly dependent on their crystal structure. Controlling the crystal structure of these materials is essential for fine-tuning their performance, $\textit{e.g.}$, linear and nonlinear optical, as well as charge transport pr…
▽ More
Transition metal dichalcogenide (TMD) materials have attracted substantial interest due to their remarkable excitonic, optical, electrical, and mechanical properties, which are highly dependent on their crystal structure. Controlling the crystal structure of these materials is essential for fine-tuning their performance, $\textit{e.g.}$, linear and nonlinear optical, as well as charge transport properties. While various phase-switching TMD materials, like molybdenum telluride (MoTe$_2$), are available, their transitions are often irreversible. Here, we investigate the mechanism of a light-induced reversible phase transition in mono- and bilayer flakes of rhenium disulfide (ReS$_2$). Our observations, based on scanning transmission electron microscopy, nonlinear spectroscopy, and density functional theory calculations, reveal a transition from the ground T$''$ (double distorted T) to the metastable H$'$ (distorted H) phase under femtosecond laser irradiation or influence of highly-energetic electrons. We show that the formation of sulfur vacancies facilitates this phenomenon. Our findings pave the way towards actively manipulating the crystal structure of ReS$_2$ and possibly its heterostructures.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Laser cooling $^{88}$Sr to microkelvin temperature with an integrated-photonics system
Authors:
Andrew R. Ferdinand,
Zheng Luo,
Sindhu Jammi,
Zachary Newman,
Grisha Spektor,
Okan Koksal,
Parth B. Patel,
Daniel Sheredy,
William Lunden,
Akash Rakholia,
Travis C. Briles,
Wenqi Zhu,
Martin M. Boyd,
Amit Agrawal,
Scott B. Papp
Abstract:
We report on experiments generating a magneto-optical trap (MOT) of 88-strontium ($^{88}$Sr) atoms at microkelvin temperature, using integrated-photonics devices. With metasurface optics integrated on a fused-silica substrate, we generate six-beam, circularly polarized, counter-propagating MOTs on the blue broad-line, 461 nm, and red narrow-line, 689 nm, Sr cooling transitions without bulk optics.…
▽ More
We report on experiments generating a magneto-optical trap (MOT) of 88-strontium ($^{88}$Sr) atoms at microkelvin temperature, using integrated-photonics devices. With metasurface optics integrated on a fused-silica substrate, we generate six-beam, circularly polarized, counter-propagating MOTs on the blue broad-line, 461 nm, and red narrow-line, 689 nm, Sr cooling transitions without bulk optics. By use of a diverging beam configuration, we create up to 10 mm diameter MOT beams at the trap** location. To frequency stabilize and linewidth narrow the cooling lasers, we use fiber-packaged, integrated nonlinear waveguides to spectrally broaden a frequency comb. The ultra-coherent supercontinuum of the waveguides covers 650 nm to 2500 nm, enabling phase locks of the cooling lasers to hertz level linewidth. Our work highlights the possibility to simplify the preparation of an ultracold 88Sr gas for an optical-lattice clock with photonic devices. By implementing a timing sequence for control of the MOT lasers and the quadrupole magnetic-field gradient, we collect atoms directly from a thermal beam into the blue MOT and continuously cool into a red MOT with dynamic detuning and intensity control. There, the red MOT temperature is as low as $2~μ$K and the overall transfer efficiency up to 16%. We characterize this sequence, including an intermediate red MOT with modulated detuning. Our experiments demonstrate an integrated photonics system capable of cooling alkaline-earth gases to microkelvin temperature with sufficient transfer efficiencies for adoption in scalable optical clocks and quantum sensors.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Three-dimensional, multi-wavelength beam formation with integrated metasurface optics for Sr laser cooling
Authors:
Sindhu Jammi,
Andrew R. Ferdinand,
Zheng Luo,
Zachary L. Newman,
Gregory Spektor,
Junyeob Song,
Okan Koksal,
Akash V. Rakholia,
William Lunden,
Daniel Sheredy,
Parth B. Patel,
Martin M. Boyd,
Wenqi Zhu,
Amit Agrawal,
Travis C. Briles,
Scott B. Papp
Abstract:
We demonstrate the formation of a complex, multi-wavelength, three-dimensional laser beam configuration with integrated metasurface optics. Our experiments support the development of a compact Sr optical-lattice clock, which leverages magneto-optical trap** on atomic transitions at 461 nm and 689 nm without bulk free-space optics. We integrate six, mm-scale metasurface optics on a fused-silica s…
▽ More
We demonstrate the formation of a complex, multi-wavelength, three-dimensional laser beam configuration with integrated metasurface optics. Our experiments support the development of a compact Sr optical-lattice clock, which leverages magneto-optical trap** on atomic transitions at 461 nm and 689 nm without bulk free-space optics. We integrate six, mm-scale metasurface optics on a fused-silica substrate and illuminate them with light from optical fibers. The metasurface optics provide full control of beam pointing, divergence, and polarization to create the laser configuration for a magneto-optical trap. We report the efficiency and integration of the three-dimensional visible laser beam configuration, demonstrating the suitability of metasurface optics for atomic laser cooling.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Capability enhancement of the X-ray micro-tomography system via ML-assisted approaches
Authors:
Dhruvi Shah,
Shruti Mehta,
Ashish Agrawal,
Shishir Purohit,
Bhaskar Chaudhury
Abstract:
Ring artifacts in X-ray micro-CT images are one of the primary causes of concern in their accurate visual interpretation and quantitative analysis. The geometry of X-ray micro-CT scanners is similar to the medical CT machines, except the sample is rotated with a stationary source and detector. The ring artifacts are caused by a defect or non-linear responses in detector pixels during the MicroCT d…
▽ More
Ring artifacts in X-ray micro-CT images are one of the primary causes of concern in their accurate visual interpretation and quantitative analysis. The geometry of X-ray micro-CT scanners is similar to the medical CT machines, except the sample is rotated with a stationary source and detector. The ring artifacts are caused by a defect or non-linear responses in detector pixels during the MicroCT data acquisition. Artifacts in MicroCT images can often be so severe that the images are no longer useful for further analysis. Therefore, it is essential to comprehend the causes of artifacts and potential solutions to maximize image quality. This article presents a convolution neural network (CNN)-based Deep Learning (DL) model inspired by UNet with a series of encoder and decoder units with skip connections for removal of ring artifacts. The proposed architecture has been evaluated using the Structural Similarity Index Measure (SSIM) and Mean Squared Error (MSE). Additionally, the results are compared with conventional filter-based non-ML techniques and are found to be better than the latter.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Focusing membrane metamirrors for integrated cavity optomechanics
Authors:
A. R. Agrawal,
J. Manley,
D. Allepuz-Requena,
D. J. Wilson
Abstract:
We have realized a suspended, high-reflectivity focusing metamirror ($f\approx 10$ cm, $\mathcal{R} \approx 99\%$) by non-periodic photonic crystal patterning of a Si$_3$N$_4$ membrane. The design enables construction of a stable, short ($L$ = 30 $μ$m), high-finesse ($\mathcal{F}>600$) membrane cavity optomechanical system using a single plano dielectric end-mirror. We present the metamirror desig…
▽ More
We have realized a suspended, high-reflectivity focusing metamirror ($f\approx 10$ cm, $\mathcal{R} \approx 99\%$) by non-periodic photonic crystal patterning of a Si$_3$N$_4$ membrane. The design enables construction of a stable, short ($L$ = 30 $μ$m), high-finesse ($\mathcal{F}>600$) membrane cavity optomechanical system using a single plano dielectric end-mirror. We present the metamirror design, fabrication process, and characterization of its reflectivity using both free space and cavity-based transmission measurements. The mirror's effective radius of curvature is inferred from the transverse mode spectrum of the cavity. In combination with phononic engineering and metallization, focusing membrane mirrors offer a route towards high-cooperativity, vertically-integrated cavity optomechanical systems with applications ranging from precision force sensing to hybrid quantum transduction.
△ Less
Submitted 21 February, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Axion Dark Matter eXperiment: Run 1A Analysis Details
Authors:
C. Boutan,
B. H. LaRoque,
E. Lentz,
N. S. Oblath,
M. S. Taubman,
J. Tedeschi,
J. Yang,
A. M. Jones,
T. Braine,
N. Crisosto,
L. J Rosenberg,
G. Rybka,
D. Will,
D. Zhang,
S. Kimes,
R. Ottens,
C. Bartram,
D. Bowring,
R. Cervantes,
A. S. Chou,
S. Knirck,
D. V. Mitchell,
A. Sonnenschein,
W. Wester,
R. Khatiwada
, et al. (28 additional authors not shown)
Abstract:
The ADMX collaboration gathered data for its Run 1A axion dark matter search from January to June 2017, scanning with an axion haloscope over the frequency range 645-680 MHz (2.66-2.81 ueV in axion mass) at DFSZ sensitivity. The resulting axion search found no axion-like signals comprising all the dark matter in the form of a virialized galactic halo over the entire frequency range, implying lower…
▽ More
The ADMX collaboration gathered data for its Run 1A axion dark matter search from January to June 2017, scanning with an axion haloscope over the frequency range 645-680 MHz (2.66-2.81 ueV in axion mass) at DFSZ sensitivity. The resulting axion search found no axion-like signals comprising all the dark matter in the form of a virialized galactic halo over the entire frequency range, implying lower bound exclusion limits at or below DFSZ coupling at the 90% confidence level. This paper presents expanded details of the axion search analysis of Run 1A, including review of relevant experimental systems, data-taking operations, preparation and interpretation of raw data, axion search methodology, candidate handling, and final axion limits.
△ Less
Submitted 27 December, 2023;
originally announced December 2023.
-
Sub-ppm Nanomechanical Absorption Spectroscopy of Silicon Nitride
Authors:
Andrew T. Land,
Mitul Dey Chowdhury,
Aman R. Agrawal,
Dalziel J. Wilson
Abstract:
Material absorption is a key limitation in nanophotonic systems; however, its characterization is often obscured by scattering and diffraction loss. Here we show that nanomechanical frequency spectroscopy can be used to characterize the absorption of a dielectric thin film at the parts-per-million (ppm) level, and use it to characterize the absorption of stoichiometric silicon nitride (Si$_3$N…
▽ More
Material absorption is a key limitation in nanophotonic systems; however, its characterization is often obscured by scattering and diffraction loss. Here we show that nanomechanical frequency spectroscopy can be used to characterize the absorption of a dielectric thin film at the parts-per-million (ppm) level, and use it to characterize the absorption of stoichiometric silicon nitride (Si$_3$N$_4$), a ubiquitous low-loss optomechanical material. Specifically, we track the frequency shift of a high-$Q$ Si$_3$N$_4$ trampoline resonator in response to photothermal heating by a $\sim10$ mW laser beam, and infer the absorption of the thin film from a model including thermal stress relaxation and both radiative and conductive heat transfer. A key insight is the presence of two thermalization timescales, a rapid ($\sim0.1$ sec) timescale due to radiative thermalization of the Si$_3$N$_4$ thin film, and a slow ($\sim100$ sec) timescale due to parasitic heating of the Si device chip. We infer the extinction coefficient of Si$_3$N$_4$ to be $\sim0.1-1$ ppm in the 532 - 1550 nm wavelength range, comparable to bounds set by waveguide resonators and notably lower than estimates with membrane-in-the-middle cavity optomechanical systems. Our approach is applicable to a broad variety of nanophotonic materials and may offer new insights into their potential.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
From concrete mixture to structural design -- a holistic optimization procedure in the presence of uncertainties
Authors:
Atul Agrawal,
Erik Tamsen,
Phaedon-Stelios Koutsourelakis,
Joerg F. Unger
Abstract:
Designing civil structures such as bridges, dams or buildings is a complex task requiring many synergies from several experts. Each is responsible for different parts of the process. This is often done in a sequential manner, e.g. the structural engineer makes a design under the assumption of certain material properties (e.g. the strength class of the concrete), and then the material engineer opti…
▽ More
Designing civil structures such as bridges, dams or buildings is a complex task requiring many synergies from several experts. Each is responsible for different parts of the process. This is often done in a sequential manner, e.g. the structural engineer makes a design under the assumption of certain material properties (e.g. the strength class of the concrete), and then the material engineer optimizes the material with these restrictions. This paper proposes a holistic optimization procedure, which combines the concrete mixture design and structural simulations in a joint, forward workflow that we ultimately seek to invert. In this manner, new mixtures beyond standard ranges can be considered. Any design effort should account for the presence of uncertainties which can be aleatoric or epistemic as when data is used to calibrate physical models or identify models that fill missing links in the workflow. Inverting the causal relations established poses several challenges especially when these involve physics-based models which most often than not do not provide derivatives/sensitivities or when design constraints are present. To this end, we advocate Variational Optimization, with proposed extensions and appropriately chosen heuristics to overcome the aforementioned challenges. The proposed methodology is illustrated using the design of a precast concrete beam with the objective to minimize the global warming potential while satisfying a number of constraints associated with its load-bearing capacity after 28days according to the Eurocode, the demoulding time as computed by a complex nonlinear Finite Element model, and the maximum temperature during the hydration.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
Quantum trap** and rotational self-alignment in triangular Casimir microcavities
Authors:
Betül Küçüköz,
Oleg V. Kotov,
Adriana Canales,
Alexander Yu. Polyakov,
Abhay V. Agrawal,
Tomasz J. Antosiewicz,
Timur O. Shegai
Abstract:
Casimir torque -- a rotational motion caused by the minimization of the zero-point energy -- is a problem that attracts significant theoretical and experimental interest. Recently, it has been realized using liquid crystal phases and natural anisotropic substrates. However, for natural materials, the torque reaches substantial values only at van der Waals distances of ~10 nm. Here, we employ Casim…
▽ More
Casimir torque -- a rotational motion caused by the minimization of the zero-point energy -- is a problem that attracts significant theoretical and experimental interest. Recently, it has been realized using liquid crystal phases and natural anisotropic substrates. However, for natural materials, the torque reaches substantial values only at van der Waals distances of ~10 nm. Here, we employ Casimir self-assembly using templated gold nanostructures of triangular symmetry for the purpose of rotational self-alignment at truly Casimir distances (100 -- 200 nm separation). The joint action of repulsive electrostatic and attractive Casimir potentials leads to the formation of a stable quantum trap, giving rise to a tunable Fabry-Perot microcavity. This cavity self aligns both laterally and rotationally to maximize the overlap area between the templated and floating triangular flakes. The rotational self-alignment is remarkably sensitive to the equilibrium distance between the two triangles as well as their area, which opens possibilities for active control through manipulating the electrostatic screening. Our self-assembled and self-aligned Casimir microcavities could find future use as a versatile and tunable platform for nanophotonic, polaritonic, and optomechanical applications.
△ Less
Submitted 6 May, 2024; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Physics-Informed Tensor Basis Neural Network for Turbulence Closure Modeling
Authors:
Leon Riccius,
Atul Agrawal,
Phaedon-Stelios Koutsourelakis
Abstract:
Despite the increasing availability of high-performance computational resources, Reynolds-Averaged Navier-Stokes (RANS) simulations remain the workhorse for the analysis of turbulent flows in real-world applications. Linear eddy viscosity models (LEVM), the most commonly employed model type, cannot accurately predict complex states of turbulence. This work combines a deep-neural-network-based, non…
▽ More
Despite the increasing availability of high-performance computational resources, Reynolds-Averaged Navier-Stokes (RANS) simulations remain the workhorse for the analysis of turbulent flows in real-world applications. Linear eddy viscosity models (LEVM), the most commonly employed model type, cannot accurately predict complex states of turbulence. This work combines a deep-neural-network-based, nonlinear eddy viscosity model with turbulence realizability constraints as an inductive bias in order to yield improved predictions of the anisotropy tensor. Using visualizations based on the barycentric map, we show that the proposed machine learning method's anisotropy tensor predictions offer a significant improvement over all LEVMs in traditionally challenging cases with surface curvature and flow separation. However, this improved anisotropy tensor does not, in general, yield improved mean-velocity and pressure field predictions in comparison with the best-performing LEVM.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Thermal intermodulation backaction in a high-cooperativity optomechanical system
Authors:
Christian M. Pluchar,
Aman R. Agrawal,
Dalziel J. Wilson
Abstract:
The pursuit of room temperature quantum optomechanics with tethered nanomechanical resonators faces stringent challenges owing to extraneous mechanical degrees of freedom. An important example is thermal intermodulation noise (TIN), a form of excess optical noise produced by mixing of thermal noise peaks. While TIN can be decoupled from the phase of the optical field, it remains indirectly coupled…
▽ More
The pursuit of room temperature quantum optomechanics with tethered nanomechanical resonators faces stringent challenges owing to extraneous mechanical degrees of freedom. An important example is thermal intermodulation noise (TIN), a form of excess optical noise produced by mixing of thermal noise peaks. While TIN can be decoupled from the phase of the optical field, it remains indirectly coupled via radiation pressure, implying a hidden source of backaction that might overwhelm shot noise. Here we report observation of TIN backaction in a high-cooperativity, room temperature cavity optomechanical system consisting of an acoustic-frequency Si$_3$N$_4$ trampoline coupled to a Fabry-Pérot cavity. The backaction we observe exceeds thermal noise by 20 dB and radiation pressure shot noise by 40 dB, despite the thermal motion being 10 times smaller than the cavity linewidth. Our results suggest that mitigating TIN may be critical to reaching the quantum regime from room temperature in a variety of contemporary optomechanical systems.
△ Less
Submitted 6 July, 2023;
originally announced July 2023.
-
A probabilistic, data-driven closure model for RANS simulations with aleatoric, model uncertainty
Authors:
Atul Agrawal,
Phaedon-Stelios Koutsourelakis
Abstract:
We propose a data-driven, closure model for Reynolds-averaged Navier-Stokes (RANS) simulations that incorporates aleatoric, model uncertainty. The proposed closure consists of two parts. A parametric one, which utilizes previously proposed, neural-network-based tensor basis functions dependent on the rate of strain and rotation tensor invariants. This is complemented by latent, random variables wh…
▽ More
We propose a data-driven, closure model for Reynolds-averaged Navier-Stokes (RANS) simulations that incorporates aleatoric, model uncertainty. The proposed closure consists of two parts. A parametric one, which utilizes previously proposed, neural-network-based tensor basis functions dependent on the rate of strain and rotation tensor invariants. This is complemented by latent, random variables which account for aleatoric model errors. A fully Bayesian formulation is proposed, combined with a sparsity-inducing prior in order to identify regions in the problem domain where the parametric closure is insufficient and where stochastic corrections to the Reynolds stress tensor are needed. Training is performed using sparse, indirect data, such as mean velocities and pressures, in contrast to the majority of alternatives that require direct Reynolds stress data. For inference and learning, a Stochastic Variational Inference scheme is employed, which is based on Monte Carlo estimates of the pertinent objective in conjunction with the reparametrization trick. This necessitates derivatives of the output of the RANS solver, for which we developed an adjoint-based formulation. In this manner, the parametric sensitivities from the differentiable solver can be combined with the built-in, automatic differentiation capability of the neural network library in order to enable an end-to-end differentiable framework. We demonstrate the capability of the proposed model to produce accurate, probabilistic, predictive estimates for all flow quantities, even in regions where model errors are present, on a separated flow in the backward-facing step benchmark problem.
△ Less
Submitted 15 April, 2024; v1 submitted 5 July, 2023;
originally announced July 2023.
-
Entanglement-Enhanced Optomechanical Sensing
Authors:
Yi Xia,
Aman R. Agrawal,
Christian M. Pluchar,
Anthony J. Brady,
Zhen Liu,
Quntao Zhuang,
Dalziel J. Wilson,
Zheshen Zhang
Abstract:
Optomechanical systems have been exploited in ultrasensitive measurements of force, acceleration, and magnetic fields. The fundamental limits for optomechanical sensing have been extensively studied and now well understood -- the intrinsic uncertainties of the bosonic optical and mechanical modes, together with the backaction noise arising from the interactions between the two, dictate the Standar…
▽ More
Optomechanical systems have been exploited in ultrasensitive measurements of force, acceleration, and magnetic fields. The fundamental limits for optomechanical sensing have been extensively studied and now well understood -- the intrinsic uncertainties of the bosonic optical and mechanical modes, together with the backaction noise arising from the interactions between the two, dictate the Standard Quantum Limit (SQL). Advanced techniques based on nonclassical probes, in-situ pondermotive squeezed light, and backaction-evading measurements have been developed to overcome the SQL for individual optomechanical sensors. An alternative, conceptually simpler approach to enhance optomechanical sensing rests upon joint measurements taken by multiple sensors. In this configuration, a pathway toward overcoming the fundamental limits in joint measurements has not been explored. Here, we demonstrate that joint force measurements taken with entangled probes on multiple optomechanical sensors can improve the bandwidth in the thermal-noise-dominant regime or the sensitivity in shot-noise-dominant regime. Moreover, we quantify the overall performance of entangled probes with the sensitivity-bandwidth product and observe a 25% increase compared to that of the classical probes. The demonstrated entanglement-enhanced optomechanical sensing could enable new capabilities for inertial navigation, acoustic imaging, and searches for new physics.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Roadmap on spatiotemporal light fields
Authors:
Yijie Shen,
Qiwen Zhan,
Logan G. Wright,
Demetrios N. Christodoulides,
Frank W. Wise,
Alan E. Willner,
Zhe Zhao,
Kai-heng Zou,
Chen-Ting Liao,
Carlos Hernández-García,
Margaret Murnane,
Miguel A. Porras,
Andy Chong,
Chenhao Wan,
Konstantin Y. Bliokh,
Murat Yessenov,
Ayman F. Abouraddy,
Liang Jie Wong,
Michael Go,
Suraj Kumar,
Cheng Guo,
Shanhui Fan,
Nikitas Papasimakis,
Nikolay I. Zheludev,
Lu Chen
, et al. (20 additional authors not shown)
Abstract:
Spatiotemporal sculpturing of light pulse with ultimately sophisticated structures represents the holy grail of the human everlasting pursue of ultrafast information transmission and processing as well as ultra-intense energy concentration and extraction. It also holds the key to unlock new extraordinary fundamental physical effects. Traditionally, spatiotemporal light pulses are always treated as…
▽ More
Spatiotemporal sculpturing of light pulse with ultimately sophisticated structures represents the holy grail of the human everlasting pursue of ultrafast information transmission and processing as well as ultra-intense energy concentration and extraction. It also holds the key to unlock new extraordinary fundamental physical effects. Traditionally, spatiotemporal light pulses are always treated as spatiotemporally separable wave packet as solution of the Maxwell's equations. In the past decade, however, more generalized forms of spatiotemporally nonseparable solution started to emerge with growing importance for their striking physical effects. This roadmap intends to highlight the recent advances in the creation and control of increasingly complex spatiotemporally sculptured pulses, from spatiotemporally separable to complex nonseparable states, with diverse geometric and topological structures, presenting a bird's eye viewpoint on the zoology of spatiotemporal light fields and the outlook of future trends and open challenges.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Membrane-based Optomechanical Accelerometry
Authors:
Mitul Dey Chowdhury,
Aman R. Agrawal,
Dalziel J. Wilson
Abstract:
Optomechanical accelerometers promise quantum-limited readout, high detection bandwidth, self-calibration, and radiation pressure stabilization. We present a simple, scalable platform that enables these benefits with nano-$g$ sensitivity at acoustic frequencies, based on a pair of vertically integrated Si$_3$N$_4$ membranes with different stiffnesses, forming an optical cavity. As a demonstration,…
▽ More
Optomechanical accelerometers promise quantum-limited readout, high detection bandwidth, self-calibration, and radiation pressure stabilization. We present a simple, scalable platform that enables these benefits with nano-$g$ sensitivity at acoustic frequencies, based on a pair of vertically integrated Si$_3$N$_4$ membranes with different stiffnesses, forming an optical cavity. As a demonstration, we integrate an ultrahigh-Q ($>10^7$), millimeter-scale Si$_3$N$_4$ trampoline membrane above an unpatterned membrane on the same Si chip, forming a finesse $\mathcal{F}\approx2$ cavity. Using direct photodetection in transmission, we resolve the relative displacement of the membranes with a shot-noise-limited imprecision of 7 fm/$\sqrt{\text{Hz}}$, yielding a thermal-noise-limited acceleration sensitivity of 562 n$g/\sqrt{\text{Hz}}$ over a 1 kHz bandwidth centered on the fundamental trampoline resonance (40 kHz). To illustrate the advantage of radiation pressure stabilization, we cold damp the trampoline to an effective temperature of 4 mK and leverage the reduced energy variance to resolve an applied stochastic acceleration of 50 n$g/\sqrt{\text{Hz}}$ in an integration time of minutes. In the future, we envision a small-scale array of these devices operating in a cryostat to search for fundamental weak forces such as dark matter.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Universal visible emitters in nanoscale integrated photonics
Authors:
Grisha Spektor,
David Carlson,
Zach Newman,
**hee Lee Skarda,
Neil Sapra,
Logan Su,
Sindhu Jammi,
Andrew R. Ferdinand,
Amit Agrawal,
Jelena Vučković,
Scott B. Papp
Abstract:
Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design app…
▽ More
Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design approach based on superposition of guided-mode sources, allowing the generation and full control of free-space radiation directly from within a single 150 nm layer Ta2O5, showing low loss across visible and near-infrared spectra. We generate diverging circularly-polarized beams at the challenging 461 nm wavelength that can be directly used for magneto-optical traps of strontium atoms, constituting a fundamental building block for a range of atomic-physics-based quantum technologies. Our generated topological vortex beams and spatially-varying polarization emitters could open unexplored light-matter interaction pathways, enabling a broad new photonic-atomic paradigm. Our platform highlights the generalizability of nanoscale devices for visible-laser emission and will be critical for scaling quantum technologies.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Axion Dark Matter
Authors:
C. B. Adams,
N. Aggarwal,
A. Agrawal,
R. Balafendiev,
C. Bartram,
M. Baryakhtar,
H. Bekker,
P. Belov,
K. K. Berggren,
A. Berlin,
C. Boutan,
D. Bowring,
D. Budker,
A. Caldwell,
P. Carenza,
G. Carosi,
R. Cervantes,
S. S. Chakrabarty,
S. Chaudhuri,
T. Y. Chen,
S. Cheong,
A. Chou,
R. T. Co,
J. Conrad,
D. Croon
, et al. (130 additional authors not shown)
Abstract:
Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synerg…
▽ More
Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synergies with astrophysical searches and advances in instrumentation including quantum-enabled readout, high-Q resonators and cavities and large high-field magnets. This white paper outlines a clear roadmap to discovery, and shows that the US is well-positioned to be at the forefront of the search for axion dark matter in the coming decade.
△ Less
Submitted 29 March, 2023; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Nanoscale torsional dissipation dilution for quantum experiments and precision measurement
Authors:
Jon R. Pratt,
Aman R. Agrawal,
Charles A. Condos,
Christian M. Pluchar,
Stephan Schlamminger,
Dalziel J. Wilson
Abstract:
We show that torsion resonators can experience massive dissipation dilution due to nanoscale strain, and draw a connection to a century-old theory from the torsion balance community which suggests that a simple torsion ribbon is naturally soft-clamped. By disrupting a commonly held belief in the nanomechanics community, our findings invite a rethinking of strategies towards quantum experiments and…
▽ More
We show that torsion resonators can experience massive dissipation dilution due to nanoscale strain, and draw a connection to a century-old theory from the torsion balance community which suggests that a simple torsion ribbon is naturally soft-clamped. By disrupting a commonly held belief in the nanomechanics community, our findings invite a rethinking of strategies towards quantum experiments and precision measurement with nanomechanical resonators. For example, we revisit the optical lever technique for monitoring displacement, and find that the rotation of a strained nanobeam can be resolved with an imprecision smaller than the zero-point motion of its fundamental torsional mode, without the use of a cavity or interferometric stability. We also find that a strained torsion ribbon can be mass-loaded without changing its $Q$ factor. We use this strategy to engineer a chip-scale torsion balance whose resonance frequency is sensitive to micro-$g$ fluctuations of the local gravitational field. Enabling both these advances is the fabrication of high-stress Si$_3$N$_4$ nanobeams with width-to-thickness ratios of $10^4$ and the recognition that their torsional modes have $Q$ factors scaling as their width-to-thickness ratio squared, yielding $Q$ factors as high as $10^8$ and $Q$-frequency products as high as $10^{13}$ Hz.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Recent Advances and Applications of Deep Learning Methods in Materials Science
Authors:
Kamal Choudhary,
Brian DeCost,
Chi Chen,
Anubhav Jain,
Francesca Tavazza,
Ryan Cohn,
Cheol WooPark,
Alok Choudhary,
Ankit Agrawal,
Simon J. L. Billinge,
Elizabeth Holm,
Shyue ** Ong,
Chris Wolverton
Abstract:
Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular.…
▽ More
Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular. In contrast, advances in image and spectral data have largely leveraged synthetic data enabled by high quality forward models as well as by generative unsupervised DL methods. In this article, we present a high-level overview of deep-learning methods followed by a detailed discussion of recent developments of deep learning in atomistic simulation, materials imaging, spectral analysis, and natural language processing. For each modality we discuss applications involving both theoretical and experimental data, typical modeling approaches with their strengths and limitations, and relevant publicly available software and datasets. We conclude the review with a discussion of recent cross-cutting work related to uncertainty quantification in this field and a brief perspective on limitations, challenges, and potential growth areas for DL methods in materials science. The application of DL methods in materials science presents an exciting avenue for future materials discovery and design.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Single atom trap** in a metasurface lens optical tweezer
Authors:
Ting-Wei Hsu,
Wenqi Zhu,
Tobias Thiele,
Mark O. Brown,
Scott B. Papp,
Amit Agrawal,
Cindy A. Regal
Abstract:
Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers usi…
▽ More
Optical metasurfaces of subwavelength pillars have provided new capabilities for the versatile definition of the amplitude, phase, and polarization of light. In this work, we demonstrate that an efficient dielectric metasurface lens can be used to trap and image single neutral atoms with a long working distance from the lens of 3 mm. We characterize the high-numerical-aperture optical tweezers using the trapped atoms and compare with numerical computations of the metasurface lens performance. We predict that future metasurfaces for atom trap** will be able to leverage multiple ongoing developments in metasurface design and enable multifunctional control in complex quantum information experiments with neutral-atoms arrays.
△ Less
Submitted 24 December, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Search for "Invisible" Axion Dark Matter in the $3.3\text{-}4.2~μ$eV Mass Range
Authors:
ADMX Collaboration,
C. Bartram,
T. Braine,
E. Burns,
R. Cervantes,
N. Crisosto,
N. Du,
H. Korandla,
G. Leum,
P. Mohapatra,
T. Nitta,
L. J Rosenberg,
G. Rybka,
J. Yang,
John Clarke,
I. Siddiqi,
A. Agrawal,
A. V. Dixit,
M. H. Awida,
A. S. Chou,
M. Hollister,
S. Knirck,
A. Sonnenschein,
W. Wester,
J. R. Gleason
, et al. (27 additional authors not shown)
Abstract:
We report the results from a haloscope search for axion dark matter in the $3.3\text{-}4.2~μ$eV mass range. This search excludes the axion-photon coupling predicted by one of the benchmark models of "invisible" axion dark matter, the KSVZ model. This sensitivity is achieved using a large-volume cavity, a superconducting magnet, an ultra low noise Josephson parametric amplifier, and sub-Kelvin temp…
▽ More
We report the results from a haloscope search for axion dark matter in the $3.3\text{-}4.2~μ$eV mass range. This search excludes the axion-photon coupling predicted by one of the benchmark models of "invisible" axion dark matter, the KSVZ model. This sensitivity is achieved using a large-volume cavity, a superconducting magnet, an ultra low noise Josephson parametric amplifier, and sub-Kelvin temperatures. The validity of our detection procedure is ensured by injecting and detecting blind synthetic axion signals.
△ Less
Submitted 29 December, 2021; v1 submitted 12 October, 2021;
originally announced October 2021.
-
The QICK (Quantum Instrumentation Control Kit): Readout and control for qubits and detectors
Authors:
Leandro Stefanazzi,
Ken Treptow,
Neal Wilcer,
Chris Stoughton,
Salvatore Montella,
Collin Bradford,
Gustavo Cancelo,
Shefali Saxena,
Horacio Arnaldi,
Sara Sussman,
Andrew Houck,
Ankur Agrawal,
Helin Zhang,
Chunyang Ding,
David I Schuster
Abstract:
We introduce a Xilinx RFSoC-based qubit controller (called the Quantum Instrumentation Control Kit, or QICK for short) which supports the direct synthesis of control pulses with carrier frequencies of up to 6 GHz. The QICK can control multiple qubits or other quantum devices. The QICK consists of a digital board hosting an RFSoC (RF System-on-Chip) FPGA \cite{zcu111}, custom firmware and software…
▽ More
We introduce a Xilinx RFSoC-based qubit controller (called the Quantum Instrumentation Control Kit, or QICK for short) which supports the direct synthesis of control pulses with carrier frequencies of up to 6 GHz. The QICK can control multiple qubits or other quantum devices. The QICK consists of a digital board hosting an RFSoC (RF System-on-Chip) FPGA \cite{zcu111}, custom firmware and software and an optional companion custom-designed analog front-end board. We characterize the analog performance of the system, as well as its digital latency, important for quantum error correction and feedback protocols. We benchmark the controller by performing standard characterizations of a transmon qubit. We achieve an average Clifford gate fidelity of $\mathcal{F}_{avg}=99.93\%$. All of the schematics, firmware, and software are open-source \cite{QICKrepo}.
△ Less
Submitted 10 March, 2022; v1 submitted 1 October, 2021;
originally announced October 2021.
-
Evaporating microfluidic droplets: A tool to study pathogen viability in bioaerosols
Authors:
Maheshwar Gopu,
Akanksha Agrawal,
Raju Mukherjee,
Dileep Mampallil
Abstract:
Pathogens in droplets on fomites and aerosols go through extreme physiochemical conditions, such as confinement and osmotic stress, due to evaporation. Still, these droplets are the predominant transmission routes of many contagious diseases. The biggest challenge for studying the survival mechanisms of pathogens in extreme conditions is closely observing them, especially in aerosols, due to the s…
▽ More
Pathogens in droplets on fomites and aerosols go through extreme physiochemical conditions, such as confinement and osmotic stress, due to evaporation. Still, these droplets are the predominant transmission routes of many contagious diseases. The biggest challenge for studying the survival mechanisms of pathogens in extreme conditions is closely observing them, especially in aerosols, due to the small droplet sizes, movements, and fast evaporative dynamics. To mimic evaporating aerosols and microdroplets, we employ microfluidic emulsion droplets. The presence of oil forms a microdroplet cluster with spatially gradient evaporation rates, which helps studying the impact of evaporation and its rate. With Escherichia coli, we show that the viability is adversely affected by the evaporation and its rate. Our method can mimic bioaerosol evaporation with controlled number of cells inside. In general, the droplets can act as microreactors with varying kinetics induced by different evaporation rates.
△ Less
Submitted 7 August, 2021;
originally announced August 2021.
-
Tunable Plasmonic Ultrastrong Coupling: Emulating Dicke Physics at Room Temperature
Authors:
Riad Yahiaoui,
Zizwe A. Chase,
Chan Kyaw,
Fuyang Tay,
Andrey Baydin,
G. Timothy Noe II,
Junyeob Song,
Junichiro Kono,
Amit Agrawal,
Motoaki Bamba,
Thomas A. Searles
Abstract:
A system of N two-level atoms cooperatively interacting with a photonic field can be described as a single giant atom coupled to the field with interaction strength ~N^0.5. This enhancement, known as Dicke cooperativity in quantum optics, has recently become an indispensable element in quantum information technology based on strong light-matter coupling. Here, we extend the coupling beyond the sta…
▽ More
A system of N two-level atoms cooperatively interacting with a photonic field can be described as a single giant atom coupled to the field with interaction strength ~N^0.5. This enhancement, known as Dicke cooperativity in quantum optics, has recently become an indispensable element in quantum information technology based on strong light-matter coupling. Here, we extend the coupling beyond the standard light-matter interaction paradigm, emulating Dicke cooperativity in a terahertz metasurface with N meta-atoms. Cooperative enhancement manifested in the form of matter-matter coupling, through the hybridization of localized surface plasmon resonance in individual meta-atoms and surface lattice resonance due to the periodic array of the meta-atoms. By varying the lattice constant of the array, we observe a clear anticrossing behavior, a signature of strong coupling. Furthermore, through engineering of the capacitive split-gap in the meta-atoms, the coupling rate was cooperatively enhanced into the ultrastrong coupling regime by a factor of N^0.5. This room-temperature technology serves as a convenient quantum emulator of the dynamics of a qubit with a giant dipole moment coherently driven by a single bosonic field.
△ Less
Submitted 27 September, 2022; v1 submitted 5 August, 2021;
originally announced August 2021.
-
Physics-aware deep neural networks for surrogate modeling of turbulent natural convection
Authors:
Didier Lucor,
Atul Agrawal,
Anne Sergent
Abstract:
Recent works have explored the potential of machine learning as data-driven turbulence closures for RANS and LES techniques. Beyond these advances, the high expressivity and agility of physics-informed neural networks (PINNs) make them promising candidates for full fluid flow PDE modeling. An important question is whether this new paradigm, exempt from the traditional notion of discretization of t…
▽ More
Recent works have explored the potential of machine learning as data-driven turbulence closures for RANS and LES techniques. Beyond these advances, the high expressivity and agility of physics-informed neural networks (PINNs) make them promising candidates for full fluid flow PDE modeling. An important question is whether this new paradigm, exempt from the traditional notion of discretization of the underlying operators very much connected to the flow scales resolution, is capable of sustaining high levels of turbulence characterized by multi-scale features? We investigate the use of PINNs surrogate modeling for turbulent Rayleigh-B{é}nard (RB) convection flows in rough and smooth rectangular cavities, mainly relying on DNS temperature data from the fluid bulk. We carefully quantify the computational requirements under which the formulation is capable of accurately recovering the flow hidden quantities. We then propose a new padding technique to distribute some of the scattered coordinates-at which PDE residuals are minimized-around the region of labeled data acquisition. We show how it comes to play as a regularization close to the training boundaries which are zones of poor accuracy for standard PINNs and results in a noticeable global accuracy improvement at iso-budget. Finally, we propose for the first time to relax the incompressibility condition in such a way that it drastically benefits the optimization search and results in a much improved convergence of the composite loss function. The RB results obtained at high Rayleigh number Ra = 2 $\bullet$ 10 9 are particularly impressive: the predictive accuracy of the surrogate over the entire half a billion DNS coordinates yields errors for all flow variables ranging between [0.3% -- 4%] in the relative L 2 norm, with a training relying only on 1.6% of the DNS data points.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
Axion Dark Matter eXperiment: Detailed Design and Operations
Authors:
R. Khatiwada,
D. Bowring,
A. S. Chou,
A. Sonnenschein,
W. Wester,
D. V. Mitchell,
T. Braine,
C. Bartram,
R. Cervantes,
N. Crisosto,
N. Du,
S. Kimes,
L. J Rosenberg,
G. Rybka,
J. Yang,
D. Will,
G. Carosi,
N. Woollett,
S. Durham,
L. D. Duffy,
R. Bradley,
C. Boutan,
M. Jones,
B. H. LaRoque,
N. S. Oblath
, et al. (26 additional authors not shown)
Abstract:
Axion Dark Matter eXperiment (ADMX) ultra low noise haloscope technology has enabled the successful completion of two science runs (1A and 1B) that looked for dark matter axions in the $2.66$ to $3.1$ $μ$eV mass range with Dine-Fischler-Srednicki-Zhitnisky (DFSZ) sensitivity Ref. [1,2]. Therefore, it is the most sensitive axion search experiment to date in this mass range. We discuss the technolog…
▽ More
Axion Dark Matter eXperiment (ADMX) ultra low noise haloscope technology has enabled the successful completion of two science runs (1A and 1B) that looked for dark matter axions in the $2.66$ to $3.1$ $μ$eV mass range with Dine-Fischler-Srednicki-Zhitnisky (DFSZ) sensitivity Ref. [1,2]. Therefore, it is the most sensitive axion search experiment to date in this mass range. We discuss the technological advances made in the last several years to achieve this sensitivity, which includes the implementation of components, such as state-of-the-art quantum limited amplifiers and a dilution refrigerator. Furthermore, we demonstrate the use of a frequency tunable Microstrip Superconducting Quantum Interference Device (SQUID) Amplifier (MSA), in Run 1A, and a Josephson Parametric Amplifier (JPA), in Run 1B, along with novel analysis tools that characterize the system noise temperature.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
Harnessing Structural and Dynamic Heterogeneity to Direct Ion Transport in Plastic Crystal-Polymer Composite Solid-Ion Conductors
Authors:
Ankit Agrawal,
Yierpan Aierken,
Meiling Sun,
Ethan J. Crumlin,
David Prendergast,
Brett A. Helms
Abstract:
Solid-ion conductors (SICs) comprising non-ionic plastic crystals and lithium salts often require compositing with polymers to render them processable for use in solid-state lithium-metal batteries. Here, we show that polymer-doped plastic crystal SICs form a previously unrecognized plastic crystal-polymer high entropy interphase, where ions selectively partition and exhibit a higher fraction of m…
▽ More
Solid-ion conductors (SICs) comprising non-ionic plastic crystals and lithium salts often require compositing with polymers to render them processable for use in solid-state lithium-metal batteries. Here, we show that polymer-doped plastic crystal SICs form a previously unrecognized plastic crystal-polymer high entropy interphase, where ions selectively partition and exhibit a higher fraction of matrix-separated ion pairs than in the bulk. Liithium ion diffusivity in this interphase is an order of magnitude higher than in other microenvironments due to an increase in the molar volume of the plastic crystal in the vicinity of the polymer, which increases the frequency of bond rotation in the plastic crystal required for ion conduction. Surprisingly, the polymer does not directly participate in ion transport. These insights led us to prepare SICs from specific polymers, plastic crystals, and lithium halide salts that concomitantly deliver fast ion conduction at ambient and sub-ambient temperatures and sustainable passivation of the lithium anode.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
High Brightness Lasing at Sub-micron Enabled by Droop-Free Fin Light-Emitting Diodes
Authors:
Babak Nikoobakht,
Robin P. Hansen,
Yuqin Zong,
Amit Agrawal,
Michael Shur,
Jerry Tersoff
Abstract:
Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range. Here we present a fin p-n junction LED pixel that eliminates efficiency droop, allowing LEDs brightness to increase linearly with injected current. With record…
▽ More
Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range. Here we present a fin p-n junction LED pixel that eliminates efficiency droop, allowing LEDs brightness to increase linearly with injected current. With record current densities of 1000 KA/cm2 (100 mA), the LEDs transition to lasing within the fin, with high brightness. Despite a light extraction efficiency of only 15%, these devices exceed the output power of any previous electrically-driven sub-micron LED or laser pixel by 100 to 1000 times, while showing comparable external quantum efficiencies. Modeling suggests that spreading of the electron-hole recombination region in fin LEDs at high injection levels suppresses the non-radiative Auger recombination processes. Further refinement of this design is expected to enable development of a new generation of high brightness electrically addressable LED and laser pixels for macro- and micro-scale applications.
△ Less
Submitted 20 June, 2020;
originally announced July 2020.
-
The Joint Automated Repository for Various Integrated Simulations (JARVIS) for data-driven materials design
Authors:
Kamal Choudhary,
Kevin F. Garrity,
Andrew C. E. Reid,
Brian DeCost,
Adam J. Biacchi,
Angela R. Hight Walker,
Zachary Trautt,
Jason Hattrick-Simpers,
A. Gilad Kusne,
Andrea Centrone,
Albert Davydov,
Jie Jiang,
Ruth Pachter,
Gowoon Cheon,
Evan Reed,
Ankit Agrawal,
Xiaofeng Qian,
Vinit Sharma,
Houlong Zhuang,
Sergei V. Kalinin,
Bobby G. Sumpter,
Ghanshyam Pilania,
Pinar Acar,
Subhasish Mandal,
Kristjan Haule
, et al. (3 additional authors not shown)
Abstract:
The Joint Automated Repository for Various Integrated Simulations (JARVIS) is an integrated infrastructure to accelerate materials discovery and design using density functional theory (DFT), classical force-fields (FF), and machine learning (ML) techniques. JARVIS is motivated by the Materials Genome Initiative (MGI) principles of develo** open-access databases and tools to reduce the cost and d…
▽ More
The Joint Automated Repository for Various Integrated Simulations (JARVIS) is an integrated infrastructure to accelerate materials discovery and design using density functional theory (DFT), classical force-fields (FF), and machine learning (ML) techniques. JARVIS is motivated by the Materials Genome Initiative (MGI) principles of develo** open-access databases and tools to reduce the cost and development time of materials discovery, optimization, and deployment. The major features of JARVIS are: JARVIS-DFT, JARVIS-FF, JARVIS-ML, and JARVIS-Tools. To date, JARVIS consists of 40,000 materials and 1 million calculated properties in JARVIS-DFT, 1,500 materials and 110 force-fields in JARVIS-FF, and 25 ML models for material-property predictions in JARVIS-ML, all of which are continuously expanding. JARVIS-Tools provides scripts and workflows for running and analyzing various simulations. We compare our computational data to experiments or high-fidelity computational methods wherever applicable to evaluate error/uncertainty in predictions. In addition to the existing workflows, the infrastructure can support a wide variety of other technologically important applications as part of the data-driven materials design paradigm. The JARVIS datasets and tools are publicly available at the website: https://jarvis.nist.gov .
△ Less
Submitted 11 July, 2021; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Likelihood of survival of coronavirus in a respiratory droplet deposited on a solid surface
Authors:
Rajneesh Bhardwaj,
Amit Agrawal
Abstract:
We predict and analyze the drying time of respiratory droplets from a COVID-19 infected subject, which is a crucial time to infect another subject. The drying of the droplet is predicted by diffusion-limited evaporation model for a sessile droplet placed on a partially-wetted surface with a pinned contact line. The variation of droplet volume, contact angle, ambient temperature, and humidity are c…
▽ More
We predict and analyze the drying time of respiratory droplets from a COVID-19 infected subject, which is a crucial time to infect another subject. The drying of the droplet is predicted by diffusion-limited evaporation model for a sessile droplet placed on a partially-wetted surface with a pinned contact line. The variation of droplet volume, contact angle, ambient temperature, and humidity are considered. We analyze the chances of the survival of the viruses present in the droplet, based on the lifetime of the droplets in several conditions, and find that the chances of survival of the virus are strongly affected by each of these parameters. The magnitude of shear stress inside the droplet computed using the model is not large enough to obliterate the virus. We also explore the relationship between the drying time of a droplet and the growth rate of the spread of COVID-19 for five different cities, and find that they are weakly correlated.
△ Less
Submitted 9 May, 2020;
originally announced May 2020.
-
Towards cavity-free ground state cooling of an acoustic-frequency silicon nitride membrane
Authors:
Christian M. Pluchar,
Aman Agrawal,
Edward Schenk,
Dalziel J. Wilson
Abstract:
We demonstrate feedback cooling of a millimeter-scale, 40 kHz SiN membrane from room temperature to 5 mK (3000 phonons) using a Michelson interferometer, and discuss the challenges to ground state cooling without an optical cavity. This advance appears within reach of current membrane technology, positioning it as a compelling alternative to levitated systems for quantum sensing and fundamental we…
▽ More
We demonstrate feedback cooling of a millimeter-scale, 40 kHz SiN membrane from room temperature to 5 mK (3000 phonons) using a Michelson interferometer, and discuss the challenges to ground state cooling without an optical cavity. This advance appears within reach of current membrane technology, positioning it as a compelling alternative to levitated systems for quantum sensing and fundamental weak force measurements.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Extended Search for the Invisible Axion with the Axion Dark Matter Experiment
Authors:
T. Braine,
R. Cervantes,
N. Crisosto,
N. Du,
S. Kimes,
L. J Rosenberg,
G. Rybka,
J. Yang,
D. Bowring,
A. S. Chou,
R. Khatiwada,
A. Sonnenschein,
W. Wester,
G. Carosi,
N. Woollett,
L. D. Duffy,
R. Bradley,
C. Boutan,
M. Jones,
B. H. LaRoque,
N. S. Oblath,
M. S. Taubman,
J. Clarke,
A. Dove,
A. Eddins
, et al. (17 additional authors not shown)
Abstract:
This paper reports on a cavity haloscope search for dark matter axions in the galactic halo in the mass range $2.81$-$3.31$ $μeV$. This search excludes the full range of axion-photon coupling values predicted in benchmark models of the invisible axion that solve the strong CP problem of quantum chromodynamics, and marks the first time a haloscope search has been able to search for axions at mode c…
▽ More
This paper reports on a cavity haloscope search for dark matter axions in the galactic halo in the mass range $2.81$-$3.31$ $μeV$. This search excludes the full range of axion-photon coupling values predicted in benchmark models of the invisible axion that solve the strong CP problem of quantum chromodynamics, and marks the first time a haloscope search has been able to search for axions at mode crossings using an alternate cavity configuration. Unprecedented sensitivity in this higher mass range is achieved by deploying an ultra low-noise Josephson parametric amplifier as the first stage signal amplifier.
△ Less
Submitted 1 November, 2019; v1 submitted 18 October, 2019;
originally announced October 2019.
-
IRNet: A General Purpose Deep Residual Regression Framework for Materials Discovery
Authors:
Dipendra Jha,
Logan Ward,
Zijiang Yang,
Christopher Wolverton,
Ian Foster,
Wei-keng Liao,
Alok Choudhary,
Ankit Agrawal
Abstract:
Materials discovery is crucial for making scientific advances in many domains. Collections of data from experiments and first-principle computations have spurred interest in applying machine learning methods to create predictive models capable of map** from composition and crystal structures to materials properties. Generally, these are regression problems with the input being a 1D vector compos…
▽ More
Materials discovery is crucial for making scientific advances in many domains. Collections of data from experiments and first-principle computations have spurred interest in applying machine learning methods to create predictive models capable of map** from composition and crystal structures to materials properties. Generally, these are regression problems with the input being a 1D vector composed of numerical attributes representing the material composition and/or crystal structure. While neural networks consisting of fully connected layers have been applied to such problems, their performance often suffers from the vanishing gradient problem when network depth is increased. In this paper, we study and propose design principles for building deep regression networks composed of fully connected layers with numerical vectors as input. We introduce a novel deep regression network with individual residual learning, IRNet, that places shortcut connections after each layer so that each layer learns the residual map** between its output and input. We use the problem of learning properties of inorganic materials from numerical attributes derived from material composition and/or crystal structure to compare IRNet's performance against that of other machine learning techniques. Using multiple datasets from the Open Quantum Materials Database (OQMD) and Materials Project for training and evaluation, we show that IRNet provides significantly better prediction performance than the state-of-the-art machine learning approaches currently used by domain scientists. We also show that IRNet's use of individual residual learning leads to better convergence during the training phase than when shortcut connections are between multi-layer stacks while maintaining the same number of parameters.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
Transfer Learning Using Ensemble Neural Networks for Organic Solar Cell Screening
Authors:
Arindam Paul,
Dipendra Jha,
Reda Al-Bahrani,
Wei-keng Liao,
Alok Choudhary,
Ankit Agrawal
Abstract:
Organic Solar Cells are a promising technology for solving the clean energy crisis in the world. However, generating candidate chemical compounds for solar cells is a time-consuming process requiring thousands of hours of laboratory analysis. For a solar cell, the most important property is the power conversion efficiency which is dependent on the highest occupied molecular orbitals (HOMO) values…
▽ More
Organic Solar Cells are a promising technology for solving the clean energy crisis in the world. However, generating candidate chemical compounds for solar cells is a time-consuming process requiring thousands of hours of laboratory analysis. For a solar cell, the most important property is the power conversion efficiency which is dependent on the highest occupied molecular orbitals (HOMO) values of the donor molecules. Recently, machine learning techniques have proved to be very useful in building predictive models for HOMO values of donor structures of Organic Photovoltaic Cells (OPVs). Since experimental datasets are limited in size, current machine learning models are trained on data derived from calculations based on density functional theory (DFT). Molecular line notations such as SMILES or InChI are popular input representations for describing the molecular structure of donor molecules. The two types of line representations encode different information, such as SMILES defines the bond types while InChi defines protonation. In this work, we present an ensemble deep neural network architecture, called SINet, which harnesses both the SMILES and InChI molecular representations to predict HOMO values and leverage the potential of transfer learning from a sizeable DFT-computed dataset- Harvard CEP to build more robust predictive models for relatively smaller HOPV datasets. Harvard CEP dataset contains molecular structures and properties for 2.3 million candidate donor structures for OPV while HOPV contains DFT-computed and experimental values of 350 and 243 molecules respectively. Our results demonstrate significant performance improvement from the use of transfer learning and leveraging both molecular representations.
△ Less
Submitted 28 July, 2019; v1 submitted 7 March, 2019;
originally announced March 2019.
-
Piezoelectrically Tuned Multimode Cavity Search for Axion Dark Matter
Authors:
C. Boutan,
M. Jones,
B. H. LaRoque,
N. S. Oblath,
R. Cervantes,
N. Du,
N. Force,
S. Kimes,
R. Ottens,
L. J. Rosenberg,
G. Rybka,
J. Yang,
G. Carosi,
N. Woollett,
D. Bowring,
A. S. Chou,
R. Khatiwada,
A. Sonnenschein,
W. Wester,
R. Bradley,
E. J. Daw,
A. Agrawal,
A. V. Dixit,
J. Clarke,
S. R. O'Kelley
, et al. (9 additional authors not shown)
Abstract:
The $μ$eV axion is a well-motivated extension to the standard model. The Axion Dark Matter eXperiment (ADMX) collaboration seeks to discover this particle by looking for the resonant conversion of dark-matter axions to microwave photons in a strong magnetic field. In this Letter, we report results from a pathfinder experiment, the ADMX "Sidecar," which is designed to pave the way for future, highe…
▽ More
The $μ$eV axion is a well-motivated extension to the standard model. The Axion Dark Matter eXperiment (ADMX) collaboration seeks to discover this particle by looking for the resonant conversion of dark-matter axions to microwave photons in a strong magnetic field. In this Letter, we report results from a pathfinder experiment, the ADMX "Sidecar," which is designed to pave the way for future, higher mass, searches. This testbed experiment lives inside of and operates in tandem with the main ADMX experiment. The Sidecar experiment excludes masses in three widely spaced frequency ranges (4202-4249, 5086-5799, and 7173-7203 MHz). In addition, Sidecar demonstrates the successful use of a piezoelectric actuator for cavity tuning. Finally, this publication is the first to report data measured using both the TM$_{010}$ and TM$_{020}$ modes.
△ Less
Submitted 3 January, 2019;
originally announced January 2019.
-
Intrinsic Optical and Electronic Properties from Quantitative Analysis of Plasmonic Semiconductor Nanocrystal Ensemble Optical Extinction
Authors:
Stephen L. Gibbs,
Corey M. Staller,
Ankit Agrawal,
Robert W. Johns,
Camila A. Saez Cabezas,
Delia J. Milliron
Abstract:
The optical extinction spectra arising from localized surface plasmon resonance in doped semiconductor nanocrystals (NCs) have intensities and lineshapes determined by free charge carrier concentrations and the various mechanisms for dam** the oscillation of those free carriers. However, these intrinsic properties are convoluted by heterogeneous broadening when measuring spectra of ensembles. We…
▽ More
The optical extinction spectra arising from localized surface plasmon resonance in doped semiconductor nanocrystals (NCs) have intensities and lineshapes determined by free charge carrier concentrations and the various mechanisms for dam** the oscillation of those free carriers. However, these intrinsic properties are convoluted by heterogeneous broadening when measuring spectra of ensembles. We reveal that the traditional Drude approximation is not equipped to fit spectra from a heterogeneous ensemble of doped semiconductor NCs and produces fit results that violate Mie scattering theory. The heterogeneous ensemble Drude approximation (HEDA) model rectifies this issue by accounting for ensemble heterogeneity and near-surface depletion. The HEDA model is applied to tin-doped indium oxide NCs for a range of sizes and do** levels but we expect it can be employed for any isotropic plasmonic particles in the quasistatic regime. It captures individual NC optical properties and their contributions to the ensemble spectra thereby enabling the analysis of intrinsic NC properties from an ensemble measurement. Quality factors for the average NC in each ensemble are quantified and found to be notably higher than those of the ensemble. Carrier mobility and conductivity derived from HEDA fits matches that measured in the bulk thin film literature.
△ Less
Submitted 25 September, 2020; v1 submitted 25 December, 2018;
originally announced December 2018.
-
Revisiting the Photon-Drag Effect in Metal Films
Authors:
Jared H. Strait,
Glenn Holland,
Wenqi Zhu,
Cheng Zhang,
Bojan R. Ilic,
Amit Agrawal,
Domenico Pacifici,
Henri J. Lezec
Abstract:
The photon-drag effect, the rectified current in a medium induced by conservation of momentum of absorbed or redirected light, is a unique probe of the detailed mechanisms underlying radiation pressure. We revisit this effect in gold, a canonical Drude metal. We discover that the signal for p-polarized illumination in ambient air is affected in both sign and magnitude by adsorbed molecules, openin…
▽ More
The photon-drag effect, the rectified current in a medium induced by conservation of momentum of absorbed or redirected light, is a unique probe of the detailed mechanisms underlying radiation pressure. We revisit this effect in gold, a canonical Drude metal. We discover that the signal for p-polarized illumination in ambient air is affected in both sign and magnitude by adsorbed molecules, opening previous measurements for reinterpretation. Further, we show that the intrinsic sign of the photon-drag effect is contrary to the prevailing intuitive model of direct momentum transfer to free electrons.
△ Less
Submitted 5 March, 2019; v1 submitted 4 December, 2018;
originally announced December 2018.
-
Microstructural Materials Design via Deep Adversarial Learning Methodology
Authors:
Zijiang Yang,
Xiaolin Li,
L. Catherine Brinson,
Alok N. Choudhary,
Wei Chen,
Ankit Agrawal
Abstract:
Identifying the key microstructure representations is crucial for Computational Materials Design (CMD). However, existing microstructure characterization and reconstruction (MCR) techniques have limitations to be applied for materials design. Model-based MCR approaches do not have parameters that can serve as design variables, while MCR techniques that rely on dimension reduction tend to lose impo…
▽ More
Identifying the key microstructure representations is crucial for Computational Materials Design (CMD). However, existing microstructure characterization and reconstruction (MCR) techniques have limitations to be applied for materials design. Model-based MCR approaches do not have parameters that can serve as design variables, while MCR techniques that rely on dimension reduction tend to lose important microstructural information. In this work, we present a deep adversarial learning methodology that overcomes the limitations of existing MCR techniques. In the proposed methodology, generative adversarial networks (GAN) are trained to learn the map** between latent variables and microstructures. Thereafter, the low-dimensional latent variables serve as design variables, and a Bayesian optimization framework is applied to obtain microstructures with desired material property. Due to the special design of the network architecture, the proposed methodology is able to identify the latent (design) variables with desired dimensionality, as well as minimize the information loss even for complex material microstructures. The validity of the proposed methodology is tested numerically on a synthetic microstructure dataset and its effectiveness for materials design is evaluated through a case study of optimizing optical performance for energy absorption. In addition, the scalability and transferability of proposed methodology are also demonstrated in this work. Specifically, the proposed methodology is scalable to generate arbitrary sized microstructures, and it can serve as a pre-trained model to improve the performance of a structure-property predictive model via transfer learning.
△ Less
Submitted 3 January, 2019; v1 submitted 7 May, 2018;
originally announced May 2018.
-
Mueller matrix spectroscopy of Fano resonance in Plasmonic Oligomers
Authors:
Shubham Chandel,
Ankit K Singh,
Aman Agrawal,
Aneeth K A,
Angad Gupta,
Achanta Venugopal,
Nirmalya Ghosh
Abstract:
Fano resonance in plasmonic oligomers originating from the interference of a spectrally broad superradiant mode and a discrete subradiant mode is under intensive recent investigations due to numerous potential applications. In this regard, development of experimental means to understand and control the complex Fano interference process and to modulate the resulting asymmetric Fano spectral line sh…
▽ More
Fano resonance in plasmonic oligomers originating from the interference of a spectrally broad superradiant mode and a discrete subradiant mode is under intensive recent investigations due to numerous potential applications. In this regard, development of experimental means to understand and control the complex Fano interference process and to modulate the resulting asymmetric Fano spectral line shape is highly sought after. Here we present a polarization Mueller matrix measurement and inverse analysis approach for quantitative understanding and interpretation of the complex interference process that lead to Fano resonance in symmetry broken plasmonic oligomers. The spectral Mueller matrices of the plasmonic oligomers were recorded using a custom designed dark-field Mueller matrix spectroscopy system. These were subsequently analyzed using differential Mueller matrix decomposition technique to yield the quantitative sample polarimetry characteristics, namely, polarization diattenuation (d) and linear retardance (δ) parameters. The unique signature of the interference of the superradiant dipolar plasmon mode and the subradiant quadrupolar mode of the symmetry broken plasmonic oligomers manifested as rapid spectral variation of the diattenuation and the linear retardance parameters across the Fano spectral dip. The polarization information contained in the Mueller matrix was further utilized to desirably control the Fano spectral line shape. The experimental Mueller matrix analysis was complemented with finite element based numerical simulations, which enabled quantitative understanding of the interference of the superradiant and the subradiant plasmon modes and its link with the polarization diattenuation and retardance parameters.
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
Mixing and de-mixing of model microswimmers in bi-motility mixtures
Authors:
Adyant Agrawal,
Su** B. Babu
Abstract:
Cooperation between micro-organisms give rise to novel phenomena like clustering, swarming in suspension. We study the collective behavior of the artificial swimmer called Taylor line at low Reynolds number using multi-particle collision dynamics method. In this paper we have modeled bi-motility mixtures of multiple swimmers in 2 dimensions, which differ from each other by the velocity with which…
▽ More
Cooperation between micro-organisms give rise to novel phenomena like clustering, swarming in suspension. We study the collective behavior of the artificial swimmer called Taylor line at low Reynolds number using multi-particle collision dynamics method. In this paper we have modeled bi-motility mixtures of multiple swimmers in 2 dimensions, which differ from each other by the velocity with which they swim. We observe that the swimmers can segregate into slower and faster ones depending on the relative difference in velocity of the 2 type of swimmers. We also observe that contribution of slower swimmers towards clustering, on an average, is much larger compared to faster ones, although we employ a homogeneous mixture. When the difference in velocity is large between the swimmers, the faster ones move away from the slower ones towards the boundary. On the other hand, when the relative difference in velocity is very small, the slower and faster swimmer mix together to form big clusters. At later time even for small difference in velocity the swimmers segregate into fast and slow swimmer clusters.
△ Less
Submitted 26 September, 2017;
originally announced September 2017.
-
Impacts of Surface Depletion on the Plasmonic Properties of Doped Semiconductor Nanocrystals
Authors:
Omid Zandi,
Ankit Agrawal,
Alex B. Shearer,
Lauren C. Gilbert,
Clayton J. Dahlman,
Corey M. Staller,
Delia J. Milliron
Abstract:
Degenerately doped semiconductor nanocrystals (NCs) exhibit a localized surface plasmon resonance (LSPR) in the infrared range of the electromagnetic spectrum. Unlike metals, semiconductor NCs offer tunable LSPR characteristics enabled by do**, or via electrochemical or photochemical charging. Tuning plasmonic properties through carrier density modulation suggests potential applications in smart…
▽ More
Degenerately doped semiconductor nanocrystals (NCs) exhibit a localized surface plasmon resonance (LSPR) in the infrared range of the electromagnetic spectrum. Unlike metals, semiconductor NCs offer tunable LSPR characteristics enabled by do**, or via electrochemical or photochemical charging. Tuning plasmonic properties through carrier density modulation suggests potential applications in smart optoelectronics, catalysis, and sensing. Here, we elucidate fundamental aspects of LSPR modulation through dynamic carrier density tuning in Sn-doped Indium Oxide NCs. Monodisperse Sn-doped Indium Oxide NCs with various do** level and sizes were synthesized and assembled in uniform films. NC films were then charged in an in situ electrochemical cell and the LSPR modulation spectra were monitored. Based on spectral shifts and intensity modulation of the LSPR, combined with optical modeling, it was found that often-neglected semiconductor properties, specifically band structure modification due to do** and surface states, strongly affect LSPR modulation. Fermi level pinning by surface defect states creates a surface depletion layer that alters the LSPR properties; it determines the extent of LSPR frequency modulation, diminishes the expected near field enhancement, and strongly reduces sensitivity of the LSPR to the surroundings.
△ Less
Submitted 2 January, 2018; v1 submitted 20 September, 2017;
originally announced September 2017.
-
Surface-Plasmon-Polariton Laser based on an Open-Cavity Fabry-Perot Resonator
Authors:
Wenqi Zhu,
Ting Xu,
Amit Agrawal,
Henri J. Lezec
Abstract:
Recent years have witnessed growing interest in the development of small-footprint lasers for potential applications in small-volume sensing and on-chip optical communications. Surface-plasmons, electromagnetic modes evanescently confined to metal-dielectric interfaces, offer an effective route to achieving lasing at nanometer-scale dimensions when resonantly amplified in contact with a gain-mediu…
▽ More
Recent years have witnessed growing interest in the development of small-footprint lasers for potential applications in small-volume sensing and on-chip optical communications. Surface-plasmons, electromagnetic modes evanescently confined to metal-dielectric interfaces, offer an effective route to achieving lasing at nanometer-scale dimensions when resonantly amplified in contact with a gain-medium. Here, we achieve visible frequency ultra-narrow linewidth lasing at room-temperature by leveraging surface plasmons propagating in an open Fabry-Perot cavity formed by a flat metal surface coated with a subwavelength-thick layer of optically-pumped gain medium and orthogonally bound by a pair of flat metal sidewalls. Low perturbation transmission-configuration sampling of the lasing plasmon mode is achieved via an evanescently coupled recessed nanoslit, opening the way to high-figure-of-merit refractive-index sensing of analytes interacting with the open cavity.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
Vesicle adhesion reveals novel universal relationships for biophysical characterization
Authors:
Ehsan Irajizad,
Ashutosh Agrawal
Abstract:
Adhesion plays an integral role in diverse biological functions ranging from cellular transport to tissue development. Estimation of adhesion strength, therefore, becomes important to gain biophysical insight into these phenomena. In this Letter, we use curvature elasticity to present non-intuitive, yet remarkably simple, universal relationships that capture vesicle-substrate interactions. Our stu…
▽ More
Adhesion plays an integral role in diverse biological functions ranging from cellular transport to tissue development. Estimation of adhesion strength, therefore, becomes important to gain biophysical insight into these phenomena. In this Letter, we use curvature elasticity to present non-intuitive, yet remarkably simple, universal relationships that capture vesicle-substrate interactions. Our study reveals that the inverse of the height, exponential of the contact area, and the force required to detach the vesicle from the substrate vary linearly with the square root of the adhesion energy. These relationships not only provide efficient strategies to tease out adhesion energy of biological molecules but can also be used to characterize the physical properties of elastic biomimetic nanoparticles. We validate the modeling predictions with experimental data from two previous studies.
△ Less
Submitted 29 April, 2016; v1 submitted 10 April, 2016;
originally announced April 2016.
-
Endocytic proteins drive vesicle growth via instability in high membrane tension environment
Authors:
Nikhil Walani,
Jennifer Torres,
Ashutosh Agrawal
Abstract:
Clathrin-mediated endocytosis (CME) is a key pathway for transporting cargo into cells via membrane vesicles. It plays an integral role in nutrient import, signal transduction, neurotransmission and cellular entry of pathogens and drug-carrying nanoparticles. As CME entails substantial local remodeling of the plasma membrane, the presence of membrane tension offers resistance to bending and hence,…
▽ More
Clathrin-mediated endocytosis (CME) is a key pathway for transporting cargo into cells via membrane vesicles. It plays an integral role in nutrient import, signal transduction, neurotransmission and cellular entry of pathogens and drug-carrying nanoparticles. As CME entails substantial local remodeling of the plasma membrane, the presence of membrane tension offers resistance to bending and hence, vesicle formation. Experiments show that in such high tension conditions, actin dynamics is required to carry out CME successfully. In this study, we build upon these pioneering experimental studies to provide fundamental mechanistic insights into the roles of two key endocytic proteins, namely, actin and BAR proteins in driving vesicle formation in high membrane tension environment. Our study reveals a new actin force induced `snap-through instability' that triggers a rapid shape transition from a shallow invagination to a highly invaginated tubular structure. We show that the association of BAR proteins stabilizes vesicles and induces a milder instability. In addition, we present a new counterintuitive role of BAR depolymerization in regulating the shape evolution of vesicles. We show that the dissociation of BAR proteins, supported by actin-BAR synergy, leads to considerable elongation and squeezing of vesicles. Going beyond the membrane geometry, we put forth a new stress-based perspective for the onset of vesicle scission and predict the shapes and composition of detached vesicles. We present the snap-through transition and the high in-plane stress as possible explanations for the intriguing direct transformation of broad and shallow invaginations into detached vesicles in BAR mutant yeast cells.
△ Less
Submitted 14 February, 2015; v1 submitted 5 February, 2015;
originally announced February 2015.
-
Rapid Production of Accurate Embedded-Atom Method Potentials for Metal Alloys
Authors:
Logan Ward,
Anupriya Agrawal,
Katharine M. Flores,
Wolfgang Windl
Abstract:
The most critical limitation to the wide-scale use of classical molecular dynamics for alloy design is the availability of suitable interatomic potentials. In this work, we demonstrate a simple procedure to generate a library of accurate binary potentials using already-existing single-element potentials that can be easily combined to form multi-component alloy potentials. For the Al-Ni, Cu-Au, and…
▽ More
The most critical limitation to the wide-scale use of classical molecular dynamics for alloy design is the availability of suitable interatomic potentials. In this work, we demonstrate a simple procedure to generate a library of accurate binary potentials using already-existing single-element potentials that can be easily combined to form multi-component alloy potentials. For the Al-Ni, Cu-Au, and Cu-Al-Zr systems, we show that this method produces results comparable in accuracy to alloy potentials where all parts have been fitted simultaneously, without the additional computational expense. Furthermore, we demonstrate applicability to both crystalline and amorphous phases.
△ Less
Submitted 4 September, 2012;
originally announced September 2012.
-
An Efficient Large-Area Grating Coupler for Surface Plasmon Polaritons
Authors:
Stephan T. Koev,
Amit Agrawal,
Henri J. Lezec,
Vladimir A. Aksyuk
Abstract:
We report the design, fabrication and characterization of a periodic grating of shallow rectangular grooves in a metallic film with the goal of maximizing the coupling efficiency of an extended plane wave (PW) of visible or near-infrared light into a single surface plasmon polariton (SPP) mode on a flat metal surface. A PW-to-SPP power conversion factor > 45 % is demonstrated at a wavelength of 78…
▽ More
We report the design, fabrication and characterization of a periodic grating of shallow rectangular grooves in a metallic film with the goal of maximizing the coupling efficiency of an extended plane wave (PW) of visible or near-infrared light into a single surface plasmon polariton (SPP) mode on a flat metal surface. A PW-to-SPP power conversion factor > 45 % is demonstrated at a wavelength of 780 nm, which exceeds by an order of magnitude the experimental performance of SPP grating couplers reported to date at any wavelength. Conversion efficiency is maximized by matching the dissipative SPP losses along the grating surface to the local coupling strength. This critical coupling condition is experimentally achieved by tailoring the groove depth and width using a focused ion beam.
△ Less
Submitted 3 November, 2011;
originally announced November 2011.
-
The Influence of High-Energy Lithium Ion Irradiation on Electrical Characteristics of Silicon and GaAs Solar Cells
Authors:
B. Jayashree,
Ramani,
M. C. Radhakrishna,
Anil Agrawal,
Saif Ahmad Khan,
A. Meulenberg
Abstract:
Space-grade Si and GaAs solar cells were irradiated with 15 & 40 MeV Li ions. Illuminated (AM0 condition) and unilluminated I-V curves reveal that the effect of high-energy Li ion irradiation has produced similar effects to that of proton irradiation. However, an additional, and different, defect mechanism is suggested to dominate in the heavier-ion results. Comparison is made with proton-irradi…
▽ More
Space-grade Si and GaAs solar cells were irradiated with 15 & 40 MeV Li ions. Illuminated (AM0 condition) and unilluminated I-V curves reveal that the effect of high-energy Li ion irradiation has produced similar effects to that of proton irradiation. However, an additional, and different, defect mechanism is suggested to dominate in the heavier-ion results. Comparison is made with proton-irradiated solar-cell work and with non-ionizing energy-loss (NIEL) radiation-damage models.
△ Less
Submitted 22 October, 2006; v1 submitted 20 October, 2006;
originally announced October 2006.