-
Computational Study on the Impact of Gasoline-Ethanol Blending on Autoignition and Soot/NOx Emissions under Gasoline Compression Ignition Conditions
Authors:
Krishna C. Kalvakala,
Harsimran Singh,
Pinaki Pal,
Jorge P. Gonzalez,
Christopher P. Kolodziej,
Suresh K. Aggarwal
Abstract:
Computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NOx), and soot emissions under low-load conditions. A four-component toluene primary reference fuel (TPRF) + ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed to represent…
▽ More
Computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NOx), and soot emissions under low-load conditions. A four-component toluene primary reference fuel (TPRF) + ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed to represent the test gasoline (RD5-87). A 3D engine CFD model employing finite-rate chemistry with a skeletal kinetic mechanism, adaptive mesh refinement (AMR), and hybrid method of moments (HMOM) is adopted to capture in-cylinder combustion and soot/NOx emissions. The engine CFD model is validated against experimental data for three gasoline-ethanol blends: E10, E30 and E100, with varying ethanol content by volume. Model validation is carried out for multiple start-of-injection (SOI) timings (-21, -27, -36, and -45 crank angle degrees after top-dead-center (aTDC)) with respect to in-cylinder pressure, heat release rate, combustion phasing, NOx and soot emissions. For late injection timings (-21 and -27oaTDC), E30 yields higher soot than E10; while the trend reverses for early injection cases (-36 and -45oaTDC). E100 yields the lowest amount of soot among all fuels irrespective of SOI timing. Further, E10 shows a non-monotonic trend in soot emissions with SOI timing: SOI-36>SOI-45>SOI-21>SOI-27, while soot emissions from E30 exhibit monotonic decrease with advancing SOI timing. NOx emissions from various fuels follow a trend of E10>E30>E100. NOx emissions increase as SOI timing is advanced for all fuels, with an anomaly for E10 and E100 where NOx decreases when SOI is advanced beyond -36oaTDC. Detailed analysis of the numerical results is performed to investigate the emission trends and elucidate the impact of chemical composition and physical properties on autoignition and emissions characteristics.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Emergent self-adaptation in an integrated photonic neural network for backpropagation-free learning
Authors:
Alessio Lugnan,
Samarth Aggarwal,
Frank Brückerhoff-Plückelmann,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran,
Peter Bienstman
Abstract:
Plastic self-adaptation, nonlinear recurrent dynamics and multi-scale memory are desired features in hardware implementations of neural networks, because they enable them to learn, adapt and process information similarly to the way biological brains do. In this work, we experimentally demonstrate these properties occurring in arrays of photonic neurons. Importantly, this is realised autonomously i…
▽ More
Plastic self-adaptation, nonlinear recurrent dynamics and multi-scale memory are desired features in hardware implementations of neural networks, because they enable them to learn, adapt and process information similarly to the way biological brains do. In this work, we experimentally demonstrate these properties occurring in arrays of photonic neurons. Importantly, this is realised autonomously in an emergent fashion, without the need for an external controller setting weights and without explicit feedback of a global reward signal. Using a hierarchy of such arrays coupled to a backpropagation-free training algorithm based on simple logistic regression, we are able to achieve a performance of 98.2% on the MNIST task, a popular benchmark task looking at classification of written digits. The plastic nodes consist of silicon photonics microring resonators covered by a patch of phase-change material that implements nonvolatile memory. The system is compact, robust, and straightforward to scale up through the use of multiple wavelengths. Moreover, it constitutes a unique platform to test and efficiently implement biologically plausible learning schemes at a high processing speed.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
High-quality amorphous Silicon Carbide for hybrid photonic integration at low temperature
Authors:
Bruno Lopez-Rodriguez,
Roald Van Der Kolk,
Samarth Aggarwal,
Naresh Sharma,
Zizheng Li,
Daniel Van Der Plaats,
Thomas Scholte,
** Chang,
Silvania F. Pereira,
Simon Groeblacher,
Harish Bhaskaran,
Iman Esmaeil Zadeh Zadeh
Abstract:
Integrated photonic platforms have proliferated in recent years, each demonstrating its own unique strengths and shortcomings. However, given the processing incompatibilities of different platforms, a formidable challenge in the field of integrated photonics still remains for combining the strength of different optical materials in one hybrid integrated platform. Silicon carbide is a material of g…
▽ More
Integrated photonic platforms have proliferated in recent years, each demonstrating its own unique strengths and shortcomings. However, given the processing incompatibilities of different platforms, a formidable challenge in the field of integrated photonics still remains for combining the strength of different optical materials in one hybrid integrated platform. Silicon carbide is a material of great interest because of its high refractive index, strong second and third-order non-linearities and broad transparecy window in the visible and near infrared. However, integrating SiC has been difficult, and current approaches rely on transfer bonding techniques, that are time consuming, expensive and lacking precision in layer thickness. Here, we demonstrate high index Amorphous Silicon Carbide (a-SiC) films deposited at 150$^{\circ}$C and verify the high performance of the platform by fabricating standard photonic waveguides and ring resonators. The intrinsic quality factors of single-mode ring resonators were in the range of $Q_{int} = (4.7-5.7)\times10^5$ corresponding to optical losses between 0.78-1.06 dB/cm. We then demonstrate the potential of this platform for future heterogeneous integration with ultralow loss thin SiN and LiNbO$_3$ platforms.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Experimental Demonstration of Neuromorphic Network with STT MTJ Synapses
Authors:
Peng Zhou,
Alexander J. Edwards,
Fred B. Mancoff,
Dimitri Houssameddine,
Sanjeev Aggarwal,
Joseph S. Friedman
Abstract:
We present the first experimental demonstration of a neuromorphic network with magnetic tunnel junction (MTJ) synapses, which performs image recognition via vector-matrix multiplication. We also simulate a large MTJ network performing MNIST handwritten digit recognition, demonstrating that MTJ crossbars can match memristor accuracy while providing increased precision, stability, and endurance.
We present the first experimental demonstration of a neuromorphic network with magnetic tunnel junction (MTJ) synapses, which performs image recognition via vector-matrix multiplication. We also simulate a large MTJ network performing MNIST handwritten digit recognition, demonstrating that MTJ crossbars can match memristor accuracy while providing increased precision, stability, and endurance.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Light-sheet microscopy with attenuation-compensated propagation-invariant beams
Authors:
Jonathan Nylk,
Kaley McCluskey,
Miguel A. Preciado,
Michael Mazilu,
Frank J. Gunn-Moore,
Sanya Aggarwal,
Javier A. Tello,
David E. K. Ferrier,
Kishan Dholakia
Abstract:
Scattering and absorption limit the penetration of optical fields into tissue, but wavefront correction, often used to compensate for these effects, is incompatible with wide field-of-view imaging and complex to implement. We demonstrate a new approach for increased penetration in light-sheet imaging, namely attenuation-compensation of the light field. This tailors an exponential intensity increas…
▽ More
Scattering and absorption limit the penetration of optical fields into tissue, but wavefront correction, often used to compensate for these effects, is incompatible with wide field-of-view imaging and complex to implement. We demonstrate a new approach for increased penetration in light-sheet imaging, namely attenuation-compensation of the light field. This tailors an exponential intensity increase along the illuminating propagation-invariant field, enabling the redistribution of intensity strategically within a sample. This powerful yet straightforward concept, combined with the self-healing of the propagation-invariant field, improves the signal-to-background ratio of Airy light-sheet microscopy up to five-fold and the contrast-to-noise ratio up to eight-fold in thick biological specimens across the field-of-view without any aberration-correction. This improvement is not limited to Airy beam light-sheet microscopy, but can also significantly increase the imaging capabilities of Bessel and lattice light-sheet microscopy techniques, paving the way for widespread uptake by the biomedical community.
△ Less
Submitted 17 August, 2017; v1 submitted 8 August, 2017;
originally announced August 2017.
-
Development of multicomponent coupled-cluster method for investigation of multiexcitonic interactions
Authors:
Benjamin H. Ellis,
Somil Aggarwal,
Arindam Chakraborty
Abstract:
Multicomponent systems are defined as chemical systems that require a quantum mechanical description of two or more different types of particles. Non-Born-Oppenheimer electron-nuclear interactions in molecules, electron-hole interactions in electronically excited nanoparticles, and electron-positron interactions are examples of physical systems that require a multicomponent quantum mechanical form…
▽ More
Multicomponent systems are defined as chemical systems that require a quantum mechanical description of two or more different types of particles. Non-Born-Oppenheimer electron-nuclear interactions in molecules, electron-hole interactions in electronically excited nanoparticles, and electron-positron interactions are examples of physical systems that require a multicomponent quantum mechanical formalism. The central challenge in the theoretical treatment of multicomponent systems is capturing the many-body correlation effects that exist not only between particles of identical types (electron-electron) but also between particles of different types (electron-nuclear and electron-hole). In this work, the development and implementation of multicomponent coupled-cluster (mcCC) theory for treating particle-particle correlation in multicomponent systems is presented. This method provides a balanced treatment of many-particle correlation in a general multicomponent system while maintaining a size-consistent and size-extensive formalism. The coupled-cluster ansatz presented here is the extension of the electronic structure CCSD formulation for multicomponent systems and is defined as $\vert Ψ_\mathrm{mcCC} \rangle = e^{T_1^\mathrm{I}+T_2^\mathrm{I}+T_1^\mathrm{II}+T_2^\mathrm{II}+T_{11}^\mathrm{I,II}+T_{12}^\mathrm{I,II}+T_{21}^\mathrm{I,II}+T_{22}^\mathrm{I,II}}\vert 0^\mathrm{I}0^\mathrm{II}\rangle$. The applicability of the mcCC method was demonstrated by computing biexciton binding energies for multiexcitonic systems and benchmarking the results against full configuration interaction calculations. The results demonstrated that connected cluster operators that generate simultaneous excitation in type I and type II space are critical for capturing electron-hole correlation in multiexcitonic systems.
△ Less
Submitted 20 October, 2015;
originally announced October 2015.
