-
Diffusion of individual nanoparticles in cylindrical diatom frustule
Authors:
Naoki Tomioka,
Yusaku Abe,
Yu Matsuda
Abstract:
Diatoms are characterised by silica cell walls (frustules), which have highly ordered micro-/nano-structures. As the synthesis of such structures remains challenging, diatom frustules offer a promissing alternative to conventional porous particles in micro-/nano-engineering. In particular, for applications in drag deliverly systems, biosensors, and filters, an understanding of particle motion insi…
▽ More
Diatoms are characterised by silica cell walls (frustules), which have highly ordered micro-/nano-structures. As the synthesis of such structures remains challenging, diatom frustules offer a promissing alternative to conventional porous particles in micro-/nano-engineering. In particular, for applications in drag deliverly systems, biosensors, and filters, an understanding of particle motion inside diatoms is of great impotance. In this study, we investigated nanoparticle (NP) motions inside diatom frustules using the single particle tracking (SPT) method. For these measruements, the diameter of the NP was about one-tenth smaller than that of the frustule. Inside the frustule, the diffusion motions of the NPs were suppressed, but this suppression was weakened near the exit of the frustule. Moreover, diffusion anisotropy between the axial and radial directions of the frustule was observed. This anisotropy is difficult to detect with ensemble methods; thus, the SPT method is a powerful approach for investigating NP motions in frustules.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Development of neutron beamline for laser-driven neutron resonance spectroscopy
Authors:
Zechen Lan,
Yasunobu Arikawa,
Alessio Morace,
Yuki Abe,
S. Reza Mirfayzi,
Tianyun Wei,
Takehito Hayakawa,
Akifumi Yogo
Abstract:
Recent progress of laser science provides laser-driven neutron source (LDNS), which has remarkable features such as the short pulse width. One of the key techniques to be developed for more efficient use of the LDNS is neutron collimation tubes to increase the number of neutrons arriving at a detector in the time-of-flight method. However, when a tube with a thick wall is used as a collimator the…
▽ More
Recent progress of laser science provides laser-driven neutron source (LDNS), which has remarkable features such as the short pulse width. One of the key techniques to be developed for more efficient use of the LDNS is neutron collimation tubes to increase the number of neutrons arriving at a detector in the time-of-flight method. However, when a tube with a thick wall is used as a collimator the neutron collection efficiency at the detector increases but the time resolution becomes wider because of multiple scattering inside of the tube. In the present study, we have developed a collimation tube made of Ni-0, which is optimized for the increased neutron collection efficiency and a reasonable time resolution. This collimator has been demonstrated experimentally using neutron resonance spectroscopy with neutrons provided from LFEX laser.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Nano-particle motion in monolithic silica column using single-particle tracking method
Authors:
Yusaku Abe,
Naoki Tomioka,
Yu Matsuda
Abstract:
Porous materials are used in a variety of industrial applications owing to their large surface areas, large pore volumes, hierarchical porosities, and low densities. The motion of particles inside the pores of porous materials has attracted considerable attention. We investigated nano-particle motion in a porous material using the single-particle tracking method. Particle motion such as absorption…
▽ More
Porous materials are used in a variety of industrial applications owing to their large surface areas, large pore volumes, hierarchical porosities, and low densities. The motion of particles inside the pores of porous materials has attracted considerable attention. We investigated nano-particle motion in a porous material using the single-particle tracking method. Particle motion such as absorption and desorption at the wall was observed. The displacement probability distribution deviated from the Gaussian distribution at the tail, indicating non-Gaussian motion of the particles. Moreover, an analysis of the relative angle between three consecutive particle positions revealed that the probability of the particle moving backward was approximately twice that of the particle moving forward. These results indicate that particle motion inside porous materials is highly complex and that a single-particle study is essensital for fabricating a structure that is suitable for applications.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Single-Shot Laser-Driven Neutron Resonance Spectroscopy for Temperature Profiling
Authors:
Zechen Lan,
Yasunobu Arikawa,
S. Reza Mirfayzi,
Alessio Morace,
Takehito Hayakawa,
Hirotaka Sato,
Takashi Kamiyama,
Tianyun Wei,
Yuta Tatsumi,
Mitsuo Koizumi,
Yuki Abe,
Shinsuke Fujioka,
Kunioki Mima,
Ryosuke Kodama,
Akifumi Yogo
Abstract:
The temperature measurement of material inside of an object is one of the key technologies for control of dynamical processes. For this purpose, various techniques such as laser-based thermography and phase-contrast imaging thermography have been studied. However, it is, in principle, impossible to measure the temperature of an element inside of an object using these techniques. One of the possibl…
▽ More
The temperature measurement of material inside of an object is one of the key technologies for control of dynamical processes. For this purpose, various techniques such as laser-based thermography and phase-contrast imaging thermography have been studied. However, it is, in principle, impossible to measure the temperature of an element inside of an object using these techniques. One of the possible solutions is measurements of Doppler brooding effect in neutron resonance absorption (NRA). Here we present a method to measure the temperature of an element or an isotope inside of an object using NRA with a single neutron pulse of approximately 100 ns width provided from a high-power laser. We demonstrate temperature measurements of a tantalum (Ta) metallic foil heated from the room temperature up to 617 K. Although the neutron energy resolution is fluctuated from shot to shot, we obtain exactly the temperature using a reference of a silver (Ag) foil kept to the room temperature. A free gas model well reproduces the results. This method enables element(isotope)-sensitive thermometry to detect the instantaneous temperature rise in dynamical processes.
△ Less
Submitted 3 October, 2023; v1 submitted 2 October, 2023;
originally announced October 2023.
-
Optical generation of quasi-stationary plasma electromagnetic structures for particle collimation with PetaWatt picosecond laser
Authors:
Ph. Korneev,
N. D. Bukharskii,
I. V. Kochetkov,
M. Ehret,
J. J. Santos,
Y. Abe,
K. F. F. Law,
S. Fujioka,
G. Schaumann,
B. Zielbauer
Abstract:
Optical generation of energetic particle bunches requires high-power laser facilities operating in picosecond or femtosecond temporal domain. It is therefore preferable to use short laser pulses in all-optical platforms designed for guiding and focusing of such particle beams, increasing their brightness and decreasing their angular divergence. We propose and discuss theoretical and experimental r…
▽ More
Optical generation of energetic particle bunches requires high-power laser facilities operating in picosecond or femtosecond temporal domain. It is therefore preferable to use short laser pulses in all-optical platforms designed for guiding and focusing of such particle beams, increasing their brightness and decreasing their angular divergence. We propose and discuss theoretical and experimental results for a novel electromagnetic guiding setup based on a shaped spiral-like 'snail' target with a relatively large useful aperture. Due to the diameter increased to a sub-mm scale, a wider particle bunches may be efficiently focused, as we show in theoretical modelling with a model field distributions, supported by the experimental data.
△ Less
Submitted 16 April, 2023;
originally announced April 2023.
-
Flow instability and momentum exchange in separation control by a synthetic jet
Authors:
Yoshiaki Abe,
Taku Nonomura,
Kozo Fujii
Abstract:
This study investigates a mechanism of controlling separated flows around an airfoil using a synthetic jet (SJ). A large-eddy simulation (LES) was performed for a leading-edge separation flow around a NACA0015 airfoil at the chord Reynolds number of $63,000$ and the angle of attack of $12^\circ$. The present LES resolves a turbulent structure inside a deforming SJ cavity by a sixth-order compact d…
▽ More
This study investigates a mechanism of controlling separated flows around an airfoil using a synthetic jet (SJ). A large-eddy simulation (LES) was performed for a leading-edge separation flow around a NACA0015 airfoil at the chord Reynolds number of $63,000$ and the angle of attack of $12^\circ$. The present LES resolves a turbulent structure inside a deforming SJ cavity by a sixth-order compact difference scheme with a deforming grid. An optimal actuation-frequency band is identified between $F^+=6.0$ and $20$ (normalised by the chord length and the freestream velocity), which suppresses the separation and drastically improves the lift-to-drag ratio. It was found that in the controlled flows, the laminar separation bubble near the leading edge periodically releases multiple spanwise-uniform vortex structures, which diffuse and merge to generate a single coherent vortex in the period of $F^+$. Such a coherent vortex plays a significant role in exchanging a chordwise momentum between a near-wall surface and the freestream away from the wall. It also entrains smaller turbulent vortices and eventually enhances the turbulent component of the Reynolds stress throughout the suction surface. Linear stability theory (LST) was subsequently compared with the LES result, which clarifies the limitations and applicability of the LST to controlled flows with the present SJ condition. It is also revealed that in the optimal $F^+$ regime, both linear and nonlinear modes are excited in a well-balanced manner, where the first mode is associated with the Kelvin-Helmholtz instability and contributes to a quick and smooth turbulent transition, while the second mode shows a frequency lower than that of the linear mode and encourages a formation of the coherent vortex structure that eventually entrains smaller turbulent vortices.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Interaction between substrate and probe in liquid metal Ga: Experimental and theoretical analysis
Authors:
Ken-ichi Amano,
Kentaro Tozawa,
Maho Tomita,
Hiroshi Nakano,
Makoto Murata,
Yousuke Abe,
Toru Utsunomiya,
Hiroyuki Sugimura,
Takashi Ichii
Abstract:
Understanding the interaction between two bodies in a liquid metal is important for develo** metals with high stiffness, strength, plasticity, and thermal stability. We conducted atomic force microscopy measurements in liquid Ga and performed a theoretical calculation in which the statistical mechanics of a simple liquid containing a quantum effect was used. The experiment and theory showed unus…
▽ More
Understanding the interaction between two bodies in a liquid metal is important for develo** metals with high stiffness, strength, plasticity, and thermal stability. We conducted atomic force microscopy measurements in liquid Ga and performed a theoretical calculation in which the statistical mechanics of a simple liquid containing a quantum effect was used. The experiment and theory showed unusual behaviours in the interactions between the probe and substrate in the liquid metal. In the interactions, there were relatively numerous oscillations and large amplitudes. Furthermore, the interaction ranges were relatively long. From the theoretical calculations, we found an asymmetric property that when the probe is solvophilic and the substrate is solvophobic, the interaction tends to be repulsive; when the solvation affinities are exchanged, the interaction tends to be attractive in the close position. Our findings will be useful for understanding and controlling dispersion stabilities of nanoparticles and chemical reactions in liquid metals.
△ Less
Submitted 18 May, 2022;
originally announced May 2022.
-
The Double Chooz antineutrino detectors
Authors:
Double Chooz Collaboration,
H. de Kerret,
Y. Abe,
C. Aberle,
T. Abrahão,
J. M. Ahijado,
T. Akiri,
J. M. Alarcón,
J. Alba,
H. Almazan,
J. C. dos Anjos,
S. Appel,
F. Ardellier,
I. Barabanov,
J. C. Barriere,
E. Baussan,
A. Baxter,
I. Bekman,
M. Bergevin,
A. Bernstein,
W. Bertoli,
T. J. C. Bezerra,
L. Bezrukov,
C. Blanco,
N. Bleurvacq
, et al. (226 additional authors not shown)
Abstract:
This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in th…
▽ More
This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in the detectors with the goal of measuring a fundamental parameter in the context of neutrino oscillation, the mixing angle θ13. The central part of the Double Chooz detectors was a main detector comprising four cylindrical volumes filled with organic liquids. From the inside towards the outside there were volumes containing gadolinium-loaded scintillator, gadolinium-free scintillator, a buffer oil and, optically separated, another liquid scintillator acting as veto system. Above this main detector an additional outer veto system using plastic scintillator strips was installed. The technologies developed in Double Chooz were inspiration for several other antineutrino detectors in the field. The detector design allowed implementation of efficient background rejection techniques including use of pulse shape information provided by the data acquisition system. The Double Chooz detectors featured remarkable stability, in particular for the detected photons, as well as high radiopurity of the detector components.
△ Less
Submitted 13 September, 2022; v1 submitted 31 January, 2022;
originally announced January 2022.
-
Development of a large-area timing and position-sensitive foil-MCP detector for mass measurements at the Rare-RI Ring in RIKEN
Authors:
Z. Ge,
H. F. Li,
T. Uesaka,
S. Naimi,
D. Nagae,
Y. Abe,
S. Omika,
F. Suzaki,
Y. Yamaguchi,
M. Wakasugi,
T. Yamaguchi,
K. Wakayama,
H. Arakawa,
K. Inomata,
K. Nishimuro,
T. Kobayashi,
S. Hosoi,
Y. Inada,
A. Ozawa,
S. Suzuki,
T. Moriguchi,
D. Kamioka,
M. Mukai,
M. Amano,
A. Kitagawa
, et al. (6 additional authors not shown)
Abstract:
To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN N…
▽ More
To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$ρ$-TOF) and in-ring isochronous mass spectrometry (IMS), a large-area electrostatic detector which possesses high position resolution and good timing resolution at the same time is developed at the Rare-RI Ring in RIBF, RIKEN Nishina Center, Japan. Besides TOF mass measurements, the detector system will also be used for heavy ion beam trajectory monitoring or momentum measurements for both beam-line and in-ring at the Rare-RI Ring. The position and timing measurements of heavy ions are performed by detecting the secondary electrons (SEs) emitted from a conversion foil during the passage of the ion. The SEs are accelerated and bent with an angle of $90^{\circ}$ by electrostatic fields onto a micro-channel-plate (MCP) electron multiplier which is coupled with a position-sensitive delay-line anode. The dependence of the timing and position resolution on applied high voltages of the detector potential plates has been studied systematically via simulation and experimentally. An isochronous condition of secondary electron transmission in the electrostatic field of the detector is chosen to optimize the structure of the detector for high performance. The best achieved timing resolution is less than 50 ps (in $σ$) and position resolution $\sim$ 1 mm (in $σ$) for 2 dimensions, respectively. The overall efficiency is $\sim$ 95$\%$ for heavy ion beam and $\sim$ 75$\%$ for $α$ particle from $^{241}$Am source.
△ Less
Submitted 12 December, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Development and operation of an electrostatic time-of-flight detector for the Rare RI storage Ring
Authors:
D. Nagae,
Y. Abe,
S. Okada,
S. Omika,
K. Wakayama,
S. Hosoi,
S. Suzuki,
T. Moriguchi,
M. Amano,
D. Kamioka,
Z. Ge,
S. Naimi,
F. Suzaki,
N. Tadano,
R. Igosawa,
K. Inomata,
H. Arakawa,
K. Nishimuro,
T. Fujii,
T. Mitsui,
Y. Yanagisawa,
H. Baba,
S. Michimasa,
S. Ota,
G. Lorusso
, et al. (6 additional authors not shown)
Abstract:
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated a…
▽ More
An electrostatic time-of-flight detector named E-MCP has been developed for quick diagnostics of circulating beam and timing measurement in mass spectrometry at the Rare-RI Ring in RIKEN. The E-MCP detector consists of a conversion foil, potential grids, and a microchannel plate. Secondary electrons are released from the surface of the foil when a heavy ion hits it. The electrons are accelerated and deflected by 90$^\circ$ toward the microchannel plate by electrostatic potentials. A thin carbon foil and a thin aluminum-coated mylar foil were used as conversion foils. We obtained time resolutions of 69(1) ps and 43(1) ps (standard deviation) for a $^{84}$Kr beam at an energy of 170 MeV/u when using the carbon and the aluminum-coated mylar foils, respectively. A detection efficiency of approximately 90% was obtained for both foils. The E-MCP detector equipped with the carbon foil was installed inside the Rare-RI Ring to confirm particle circulation within a demonstration experiment on mass measurements of nuclei around $^{78}$Ge produced by in-flight fission of uranium beam at the RI Beam Factory in RIKEN. Periodic time signals from circulating ions were clearly observed. Revolution times for $^{78}$Ge, $^{77}$Ga, and $^{76}$Zn were obtained. The results confirmed successful circulation of the short-lived nuclei inside the Rare-RI Ring.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Relating the thermal properties of a micro pulsating heat pipe to the internal flow characteristics via experiments, image recognition of flow patterns and heat transfer simulations
Authors:
Chihiro Kamijima,
Yuta Yoshimoto,
Yutaro Abe,
Shu Takagi,
Ikuya Kinefuchi
Abstract:
We investigate the relationship between the thermal properties of a micro pulsating heat pipe (MPHP) and the internal flow characteristics. The MPHP consists of an eleven-turn closed-loop of a meandering square microchannel with a hydraulic diameter of $350\ {}μ{\rm m}$ engraved on a silicon substrate. The MPHP charged with Fluorinert FC-72 tends to exhibit higher effective thermal conductivities…
▽ More
We investigate the relationship between the thermal properties of a micro pulsating heat pipe (MPHP) and the internal flow characteristics. The MPHP consists of an eleven-turn closed-loop of a meandering square microchannel with a hydraulic diameter of $350\ {}μ{\rm m}$ engraved on a silicon substrate. The MPHP charged with Fluorinert FC-72 tends to exhibit higher effective thermal conductivities for the coolant temperature of $T_{\rm c} = 40\ {}^\circ\mathrm{C}$ compared to $T_{\rm c} = 20\ {}^\circ\mathrm{C}$, and provides the highest effective thermal conductivity of about $700\ {}{\rm W/(m{\cdot}K)}$ for $T_{\rm c} = 40\ {}^\circ\mathrm{C}$ and a filling ratio of 48%. Interestingly, we observe two different self-oscillation modes having different thermal conductivities, even for identical heat input rates. This tendency indicates a hysteresis of the effective thermal conductivity, which originates from the difference in the heat input rates at which the MPHP falls into and recovers from dryout. Subsequently, semantic segmentation-based image recognition is applied to the recorded flow images to identify the flow characteristics, successfully extracting four different flow patterns involving liquid slugs, liquid films, dry walls, and rapid-boiling regions. The image recognition results indicate that high effective thermal conductivities of the MPHP relate to stable self-oscillations with large amplitudes and high frequencies, along with long and thin liquid films beneficial for latent heat transfer. Finally, we perform numerical simulations of latent/sensible heat transfer via vapor plugs and of sensible heat transfer via liquid slugs using the extracted flow patterns as inputs. We find that latent heat transfer via liquid films accounts for a considerable portion of the overall heat transfer, while the sensible heat transfer via liquid slugs is much less significant.
△ Less
Submitted 10 September, 2020; v1 submitted 21 April, 2020;
originally announced June 2020.
-
Intersatellite-link demonstration mission between CubeSOTA (LEO CubeSat) and ETS9-HICALI (GEO satellite)
Authors:
Alberto Carrasco-Casado,
Phong Xuan Do,
Dimitar Kolev,
Takayuki Hosonuma,
Koichi Shiratama,
Hiroo Kunimori,
Phuc V. Trinh,
Yuma Abe,
Shinichi Nakasuka,
Morio Toyoshima
Abstract:
LEO-to-GEO intersatellite links using laser communications bring important benefits to greatly enhance applications such as downloading big amounts of data from LEO satellites by using the GEO satellite as a relay. By using this strategy, the total availability of the LEO satellite increases from less than 1% if the data is downloaded directly to the ground up to about 60% if the data is relayed t…
▽ More
LEO-to-GEO intersatellite links using laser communications bring important benefits to greatly enhance applications such as downloading big amounts of data from LEO satellites by using the GEO satellite as a relay. By using this strategy, the total availability of the LEO satellite increases from less than 1% if the data is downloaded directly to the ground up to about 60% if the data is relayed through GEO. The main drawback of using a GEO relay is that link budget is much more difficult to close due to the much larger distance. However, this can be partially compensated by transmitting at a lower data rate, and still benefiting from the much-higher link availability when compared to LEO-to-ground downlinks, which additionally are more limited by the clouds than the relay option. After carrying out a feasibility study, NICT and the University of Tokyo started preparing a mission to demonstrate the technologies needed to perform these challenging lasercom links. Furthermore, to demonstrate the feasibility of this technique, an extremely-small satellite, i.e. a 6U CubeSat, will be used to achieve data rates as high as 10 Gbit/s between LEO and GEO. Some of the biggest challenges of this mission are the extremely low size, weight and power available in the CubeSat, the accurate pointing precision required for the lasercom link, and the difficulties of closing the link at such a high speed as 10 Gbit/s.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Lattice Boltzmann modeling and simulation of forced-convection boiling on a cylinder
Authors:
Shimpei Saito,
Alessandro De Rosis,
Linlin Fei,
Kai H. Luo,
Ken-ichi Ebihara,
Akiko Kaneko,
Yutaka Abe
Abstract:
When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space…
▽ More
When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space of central moments (CMs) to enhance numerical stability for high Reynolds numbers. The adopted forcing scheme, consistent with the CMs-based LBM, leads to a concise yet robust algorithm. Furthermore, additional terms required to ensure thermodynamic consistency are derived in a CMs framework. The effectiveness of the present scheme is successfully tested against a series of boiling processes, including nucleation, growth, and departure of a vapor bubble for Reynolds numbers varying between 30 and 30000. Our CMs-based LBM can reproduce all the boiling regimes, i.e., nucleate boiling, transition boiling, and film boiling, without any artificial input such as initial vapor phase. We find that the typical boiling curve, also known as the Nukiyama curve, appears even though the focused system is not the pool boiling but the forced-convection system. Also, our simulations support experimental observations of intermittent direct solid-liquid contact even in the film-boiling regime. Finally, we provide quantitative comparison with the semi-empirical correlations for the forced-convection film boiling on a cylinder on the Nu-Ja diagram.
△ Less
Submitted 4 January, 2021; v1 submitted 4 December, 2019;
originally announced December 2019.
-
Kilotesla plasmoid formation by a trapped relativistic laser beam
Authors:
M. Ehret,
Yu. Kochetkov,
Y. Abe,
K. F. F. Law,
V. Stepanischev,
S. Fujioka,
E. d'Humi'eres,
B. Zielbauer,
V. Bagnoud,
G. Schaumann,
M. Roth,
V. Tikhonchuk,
J. J. Santos,
Ph. Korneev
Abstract:
A strong quasi-stationary magnetic field is generated in hollow targets with curved internal surface under the action of a relativistically intense picosecond laser pulse. Experimental data evidence formation of quasistationary strongly magnetized plasma structures decaying on the hundred picoseconds time scale, with the maximum value of magnetic field strength of the kilotesla scale. Numerical si…
▽ More
A strong quasi-stationary magnetic field is generated in hollow targets with curved internal surface under the action of a relativistically intense picosecond laser pulse. Experimental data evidence formation of quasistationary strongly magnetized plasma structures decaying on the hundred picoseconds time scale, with the maximum value of magnetic field strength of the kilotesla scale. Numerical simulations unravel the importance of transient processes during the magnetic field generation, and suggest the existence of fast and slow regimes of plasmoid evolution depending on the interaction parameters. The principal setup is universal for perspective highly magnetized plasma application and fundamental studies.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Peta-Pascal Pressure Driven by Fast Isochoric Heating with Multi-Picosecond Intense Laser Pulse
Authors:
Kazuki Matsuo,
Naoki Higashi,
Natsumi Iwata,
Shohei Sakata,
Seungho Lee,
Tomoyuki Johzaki,
Hiroshi Sawada,
Yuki Iwasa,
King Fai Farley Law,
Hiroki Morita,
Yugo Ochiai,
Sadaoki Kojima,
Yuki Abe,
Masayasu Hata,
Takayoshi Sano,
Hideo Nagatomo,
Atsushi Sunahara,
Alessio Morace,
Akifumi Yogo,
Mitsuo Nakai,
Hitoshi Sakagami,
Tetsuo Ozaki,
Kohei Yamanoi,
Takayoshi Norimatsu,
Yoshiki Nakata
, et al. (9 additional authors not shown)
Abstract:
Fast isochoric laser heating is a scheme to heat a matter with relativistic-intensity ($>$ 10$^{18}$ W/cm$^2$) laser pulse or X-ray free electron laser pulse. The fast isochoric laser heating has been studied for creating efficiently ultra-high-energy-density (UHED) state. We demonstrate an fast isochoric heating of an imploded dense plasma using a multi-picosecond kJ-class petawatt laser with an…
▽ More
Fast isochoric laser heating is a scheme to heat a matter with relativistic-intensity ($>$ 10$^{18}$ W/cm$^2$) laser pulse or X-ray free electron laser pulse. The fast isochoric laser heating has been studied for creating efficiently ultra-high-energy-density (UHED) state. We demonstrate an fast isochoric heating of an imploded dense plasma using a multi-picosecond kJ-class petawatt laser with an assistance of externally applied kilo-tesla magnetic fields for guiding fast electrons to the dense plasma.The UHED state with 2.2 Peta-Pascal is achieved experimentally with 4.6 kJ of total laser energy that is one order of magnitude lower than the energy used in the conventional implosion scheme. A two-dimensional particle-in-cell simulation reveals that diffusive heating from a laser-plasma interaction zone to the dense plasma plays an essential role to the efficient creation of the UHED state.
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
Hard particle spectra of galactic X-ray sources by relativistic magnetic reconnection in laser lab
Authors:
K. F. F. Law,
Y. Abe,
A. Morace,
Y. Arikawa,
S. Sakata,
S. Lee,
K. Matsuo,
H. Morita,
Y. Ochiai,
C. Liu,
A. Yogo,
K. Okamoto,
D. Golovin,
M. Ehret,
T. Ozaki,
M. Nakai,
Y. Sentoku,
J. J. Santos,
E. d'Humières,
Ph. Korneev,
S. Fujioka
Abstract:
Magnetic reconnection is a process whereby magnetic field lines in different directions "reconnect" with each other, resulting in the rearrangement of magnetic field topology together with the conversion of magnetic field energy into the kinetic energy (K.E.) of energetic particles. This process occurs in magnetized astronomical plasmas, such as those in the solar corona, Earth's magnetosphere, an…
▽ More
Magnetic reconnection is a process whereby magnetic field lines in different directions "reconnect" with each other, resulting in the rearrangement of magnetic field topology together with the conversion of magnetic field energy into the kinetic energy (K.E.) of energetic particles. This process occurs in magnetized astronomical plasmas, such as those in the solar corona, Earth's magnetosphere, and active galactic nuclei, and accounts for various phenomena, such as solar flares, energetic particle acceleration, and powering of photon emission. In the present study, we report the experimental demonstration of magnetic reconnection under relativistic electron magnetization situation, along with the observation of power-law distributed outflow in both electron and proton energy spectra. Through irradiation of an intense laser on a "micro-coil", relativistically magnetized plasma was produced and magnetic reconnection was performed with maximum magnetic field 3 kT. In the downstream outflow direction, the non-thermal component is observed in the high-energy part of both electron and proton spectra, with a significantly harder power-law slope of the electron spectrum (p = 1.535 +/- 0.015) that is similar to the electron injection model proposed to explain a hard emission tail of Cygnus X-1, a galactic X-ray source with the same order of magnetization. The obtained result showed experimentally that the magnetization condition in the emitting region of a galactic X-ray source is sufficient to build a hard electron population through magnetic reconnection.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Color-gradient lattice Boltzmann model with nonorthogonal central moments: Hydrodynamic melt-jet breakup simulations
Authors:
Shimpei Saito,
Alessandro De Rosis,
Alessio Festuccia,
Akiko Kaneko,
Yutaka Abe,
Kazuya Koyama
Abstract:
We develop a lattice Boltzmann (LB) model for immiscible two-phase flow simulations with central moments (CMs). This successfully combines a three-dimensional nonorthogonal CM-based LB scheme [A. De Rosis, Phys. Rev. E 95, 013310 (2017)] with our previous color-gradient LB model [S. Saito, Y. Abe, and K. Koyama, Phys. Rev. E 96, 013317 (2017)]. Hydrodynamic melt-jet breakup simulations show that t…
▽ More
We develop a lattice Boltzmann (LB) model for immiscible two-phase flow simulations with central moments (CMs). This successfully combines a three-dimensional nonorthogonal CM-based LB scheme [A. De Rosis, Phys. Rev. E 95, 013310 (2017)] with our previous color-gradient LB model [S. Saito, Y. Abe, and K. Koyama, Phys. Rev. E 96, 013317 (2017)]. Hydrodynamic melt-jet breakup simulations show that the proposed model is significantly more stable, even for flow with extremely high Reynolds numbers, up to $O(10^6)$. This enables us to investigate the phenomena expected under actual reactor conditions.
△ Less
Submitted 11 June, 2018; v1 submitted 24 April, 2018;
originally announced April 2018.
-
Central-moments-based lattice Boltzmann scheme for coupled Cahn-Hilliard-Navier-Stokes equations
Authors:
Alessandro De Rosis,
Shimpei Saito,
Akiko Kaneko,
Yutaka Abe
Abstract:
In this paper, we propose a lattice Boltzmann (LB) model to solve the coupled Cahn-Hilliard-Navier-Stokes equations. Differently from previous efforts, the LB equation for the fluid velocity is decomposed in a space of non-orthogonal central moments where the surface tension force is inserted directly in the equilibrium state. The present scheme is validated against well-consolidated benchmark tes…
▽ More
In this paper, we propose a lattice Boltzmann (LB) model to solve the coupled Cahn-Hilliard-Navier-Stokes equations. Differently from previous efforts, the LB equation for the fluid velocity is decomposed in a space of non-orthogonal central moments where the surface tension force is inserted directly in the equilibrium state. The present scheme is validated against well-consolidated benchmark tests, showing very good accuracy. Moreover, it outperforms the BGK approach in terms of stability, as our algorithm allows us to simulate a very large range of viscosity contrast.
△ Less
Submitted 30 March, 2018;
originally announced March 2018.
-
Super-ponderomotive electron acceleration in blowout plasma heated by multi-picosecond relativistic intensity laser pulse
Authors:
Sadaoki Kojima,
Masayasu Hata,
Natsumi Iwata,
Yasunobu Arikawa,
Alessio Morace,
Shouhei Sakata,
Seungho Lee,
Kazuki Matsuo,
King Fai Farley Law,
Hiroki Morita,
Yugo Ochiai,
Akifumi Yogo,
Hideo Nagatomo,
Tetsuo Ozaki,
Tomoyuki Johzaki,
Atsushi Sunahara,
Hitoshi Sakagami,
Zhe Zhang,
Shota Tosaki,
Yuki Abe,
Junji Kawanaka,
Shigeki Tokita,
Mitsuo Nakai,
Hiroaki Nishimura,
Hiroyuki Shiraga
, et al. (3 additional authors not shown)
Abstract:
The dependence of the mean kinetic energy of laser-accelerated electrons on the laser intensity, so-called ponderomotive scaling, was derived theoretically with consideration of the motion of a single electron in oscillating laser fields. This scaling explains well the experimental results obtained with high-intensity pulses and durations shorter than a picosecond; however, this scaling is no long…
▽ More
The dependence of the mean kinetic energy of laser-accelerated electrons on the laser intensity, so-called ponderomotive scaling, was derived theoretically with consideration of the motion of a single electron in oscillating laser fields. This scaling explains well the experimental results obtained with high-intensity pulses and durations shorter than a picosecond; however, this scaling is no longer applicable to the multi-picosecond (multi-ps) facility experiments. Here, we experimentally clarified the generation of the super-ponderomotive-relativistic electrons (SP-REs) through multi-ps relativistic laser-plasma interactions using prepulse-free LFEX laser pulses that were realized using a plasma mirror (PM). The SP-REs are produced with direct laser acceleration assisted by the self-generated quasi-static electric field and with loop-injected direct acceleration by the self- generated quasi-static magnetic field, which grow in a blowout plasma heated by a multi-ps laser pulse. Finally, we theoretically derive the threshold pulse duration to boost the acceleration of REs, which provides an important insight into the determination of laser pulse duration at kilojoule- petawatt laser facilities.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Whispering gallery effect in relativistic optics
Authors:
Y. Abe,
K. -F. -F. Law,
Ph. Korneev,
S. Fujioka,
S. Kojima,
S. -H. Lee,
S. Sakata,
K. Matsuo,
A. Oshima,
A. Morace,
Y. Arikawa,
A. Yogo,
M. Nakai,
T. Norimatsu,
E. d'Humiéres,
J. J. Santos,
K. Kondo,
A. Sunahara,
S. Gus'kov,
V. Tikhonchuk
Abstract:
A relativistic laser pulse, confined in a cylindrical target, performs multiple scattering along the target surface. The confinement property of the target results in a very effcient interaction. This proccess, which is just yet another example of the "whispering gallery" effect, may pronounce itself in plenty of physical phenomena, including surface grazing electron acceleration and generation of…
▽ More
A relativistic laser pulse, confined in a cylindrical target, performs multiple scattering along the target surface. The confinement property of the target results in a very effcient interaction. This proccess, which is just yet another example of the "whispering gallery" effect, may pronounce itself in plenty of physical phenomena, including surface grazing electron acceleration and generation of relativistic magnetized plasma structures.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States
Authors:
Shohei Sakata,
Seungho Lee,
Tomoyuki Johzaki,
Hiroshi Sawada,
Yuki Iwasa,
Hiroki Morita,
Kazuki Matsuo,
King Fai Farley Law,
Akira Yao,
Masayasu Hata,
Atsushi Sunahara,
Sadaoki Kojima,
Yuki Abe,
Hidetaka Kishimoto,
Aneez Syuhada,
Takashi Shiroto,
Alessio Morace,
Akifumi Yogo,
Natsumi Iwata,
Mitsuo Nakai,
Hitoshi Sakagami,
Tetsuo Ozaki,
Kohei Yamanoi,
Takayoshi Norimatsu,
Yoshiki Nakata
, et al. (14 additional authors not shown)
Abstract:
The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused b…
▽ More
The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused by the hot spark mixing with the surrounding cold fuel, which is the crucial problem of the currently pursued ignition scheme. High-intensity lasers efficiently produce relativistic electron beams (REB). A part of the REB kinetic energy is deposited in the core, and then the heated region becomes the hot spark to trigger the ignition. However, only a small portion of the REB collides with the core because of its large divergence. Here we have demonstrated enhanced laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a kilo-tesla-level magnetic field that is applied to the transport region from the REB generation point to the core which results in guiding the REB along the magnetic field lines to the core. 7.7 $\pm$ 1.3 % of the maximum coupling was achieved even with a relatively small radial area density core ($ρR$ $\sim$ 0.1 g/cm$^2$). The guided REB transport was clearly visualized in a pre-compressed core by using Cu-$K_α$ imaging technique. A simplified model coupled with the comprehensive diagnostics yields 6.2\% of the coupling that agrees fairly with the measured coupling. This model also reveals that an ignition-scale areal density core ($ρR$ $\sim$ 0.4 g/cm$^2$) leads to much higher laser-to-core coupling ($>$ 15%), this is much higher than that achieved by the current scheme.
△ Less
Submitted 16 December, 2017;
originally announced December 2017.
-
Laser electron acceleration on curved surfaces
Authors:
Ph. Korneev,
Y. Abe,
K. -F. -F. Law,
S. G. Bochkarev,
S. Fujioka,
S. Kojima,
S. -H. Lee,
S. Sakata,
K. Matsuo,
A. Oshima,
A. Morace,
Y. Arikawa,
A. Yogo,
M. Nakai,
T. Norimatsu,
E. d'Humiéres,
J. J. Santos,
K. Kondo,
A. Sunahara,
V. Yu. Bychenkov,
S. Gus'kov,
V. Tikhonchuk
Abstract:
Electron acceleration by relativistically intense laser beam propagating along a curved surface allows to split softly the accelerated electron bunch and the laser beam. The presence of a curved surface allows to switch an adiabatic invariant of electrons in the wave instantly leaving the gained energy to the particles. The efficient acceleration is provided by the presence of strong transient qua…
▽ More
Electron acceleration by relativistically intense laser beam propagating along a curved surface allows to split softly the accelerated electron bunch and the laser beam. The presence of a curved surface allows to switch an adiabatic invariant of electrons in the wave instantly leaving the gained energy to the particles. The efficient acceleration is provided by the presence of strong transient quasistationary fields in the interaction region and a long efficient acceleration length. The curvature of the surface allows to select the accelerated particles and provides their narrow angular distribution. The mechanism at work is explicitly demonstrated in theoretical models and experiments.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
Lattice Boltzmann modeling and simulation of liquid jet breakup
Authors:
Shimpei Saito,
Yutaka Abe,
Kazuya Koyama
Abstract:
A three-dimensional color-fluid lattice Boltzmann model for immiscible two-phase flows is developed in the framework of a three-dimensional 27-velocity (D3Q27) lattice. The collision operator comprises the D3Q27 versions of three sub-operators: a multiple-relaxation-time (MRT) collision operator, a generalized Liu--Valocchi--Kang perturbation operator, and a Latva-Kokko--Rothman recoloring operato…
▽ More
A three-dimensional color-fluid lattice Boltzmann model for immiscible two-phase flows is developed in the framework of a three-dimensional 27-velocity (D3Q27) lattice. The collision operator comprises the D3Q27 versions of three sub-operators: a multiple-relaxation-time (MRT) collision operator, a generalized Liu--Valocchi--Kang perturbation operator, and a Latva-Kokko--Rothman recoloring operator. A D3Q27 version of an enhanced equilibrium distribution function is also incorporated into this model to improve the Galilean invariance. Three types of numerical tests, namely, a static droplet, an oscillating droplet, and the Rayleigh--Taylor instability, show a good agreement with analytical solutions and numerical simulations. Following these numerical tests, this model is applied to liquid-jet-breakup simulations. The simulation conditions are matched to the conditions of the previous experiments. In this case, numerical stability is maintained throughout the simulation, although the kinematic viscosity for the continuous phase is set as low as $1.8\times10^{-4}$, in which case the corresponding Reynolds number is $3.4\times10^{3}$; the developed lattice Boltzmann model based on the D3Q27 lattice enables us to perform the simulation with parameters directly matched to the experiments. The jet's liquid column transitions from an asymmetrical to an axisymmetrical shape, and entrainment occurs from the side of the jet. The measured time history of the jet's leading-edge position shows a good agreement with the experiments. Finally, the reproducibility of the regime map for liquid-liquid systems is assessed. The present lattice Boltzmann simulations well reproduce the characteristics of predicted regimes, including varicose breakup, sinuous breakup, and atomization.
△ Less
Submitted 28 June, 2017; v1 submitted 8 May, 2017;
originally announced May 2017.
-
Characterization of the Spontaneous Light Emission of the PMTs used in the Double Chooz Experiment
Authors:
Double Chooz collaboration,
Y. Abe,
T. Abrahão,
H. Almazan,
C. Alt,
S. Appel,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
T. Brugière,
C. Buck,
J. Busenitz,
A. Cabrera,
E. Calvo,
L. Camilleri,
R. Carr,
M. Cerrada,
E. Chauveau,
P. Chimenti,
A. P. Collin,
E. Conover,
J. M. Conrad
, et al. (124 additional authors not shown)
Abstract:
During the commissioning of the first of the two detectors of the Double Chooz experiment, an unexpected and dominant background caused by the emission of light inside the optical volume has been observed. A specific study of the ensemble of phenomena called "Light Noise" has been carried out in-situ, and in an external laboratory, in order to characterize the signals and to identify the possible…
▽ More
During the commissioning of the first of the two detectors of the Double Chooz experiment, an unexpected and dominant background caused by the emission of light inside the optical volume has been observed. A specific study of the ensemble of phenomena called "Light Noise" has been carried out in-situ, and in an external laboratory, in order to characterize the signals and to identify the possible processes underlying the effect. Some mechanisms of instrumental noise originating from the PMTs were identified and it has been found that the leading one arises from the light emission localized on the photomultiplier base and produced by the combined effect of heat and high voltage across the transparent epoxy resin covering the electric components. The correlation of the rate and the amplitude of the signal with the temperature has been observed. For the first detector in operation the induced background has been mitigated using online and offline analysis selections based on timing and light pattern of the signals, while a modification of the photomultiplier assembly has been implemented for the second detector in order to blacken the PMT bases.
△ Less
Submitted 17 August, 2016; v1 submitted 23 April, 2016;
originally announced April 2016.
-
Muon capture on light isotopes in Double Chooz
Authors:
Double Chooz collaboration,
Y. Abe,
T. Abrahão,
H. Almazan,
C. Alt,
S. Appel,
J. C. Barriere,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
T. Brugière,
C. Buck,
J. Busenitz,
A. Cabrera,
L. Camilleri,
R. Carr,
M. Cerrada,
E. Chauveau,
P. Chimenti,
A. P. Collin,
E. Conover,
J. M. Conrad
, et al. (122 additional authors not shown)
Abstract:
Using the Double Chooz detector, designed to measure the neutrino mixing angle $θ_{13}$, the products of $μ^-$ capture on $^{12}$C, $^{13}$C, $^{14}$N and $^{16}$O have been measured. Over a period of 489.5 days, $2.3\times10^6$ stop** cosmic $μ^-$ have been collected, of which $1.8\times10^5$ captured on carbon, nitrogen, or oxygen nuclei in the inner detector scintillator or acrylic vessels. T…
▽ More
Using the Double Chooz detector, designed to measure the neutrino mixing angle $θ_{13}$, the products of $μ^-$ capture on $^{12}$C, $^{13}$C, $^{14}$N and $^{16}$O have been measured. Over a period of 489.5 days, $2.3\times10^6$ stop** cosmic $μ^-$ have been collected, of which $1.8\times10^5$ captured on carbon, nitrogen, or oxygen nuclei in the inner detector scintillator or acrylic vessels. The resulting isotopes were tagged using prompt neutron emission (when applicable), the subsequent beta decays, and, in some cases, $β$-delayed neutrons. The most precise measurement of the rate of $^{12}\mathrm C(μ^-,ν)^{12}\mathrm B$ to date is reported: $6.57^{+0.11}_{-0.21}\times10^{3}\,\mathrm s^{-1}$, or $(17.35^{+0.35}_{-0.59})\%$ of nuclear captures. By tagging excited states emitting gammas, the ground state transition rate to $^{12}$B has been determined to be $5.68^{+0.14}_{-0.23}\times10^3\,\mathrm s^{-1}$. The heretofore unobserved reactions $^{12}\mathrm C(μ^-,να)^{8}\mathrm{Li}$, $^{13}\mathrm C(μ^-,ν\mathrm nα)^{8}\mathrm{Li}$, and $^{13}\mathrm C(μ^-,ν\mathrm n)^{12}\mathrm B$ are measured. Further, a population of $β$n decays following stop** muons is identified with $5.5σ$ significance. Statistics limit our ability to identify these decays definitively. Assuming negligible production of $^{8}$He, the reaction $^{13}\mathrm C(μ^-,να)^{9}\mathrm{Li}$ is found to be present at the $2.7σ$ level. Limits are set on a variety of other processes.
△ Less
Submitted 17 May, 2016; v1 submitted 23 December, 2015;
originally announced December 2015.
-
Measurement of $θ_{13}$ in Double Chooz using neutron captures on hydrogen with novel background rejection techniques
Authors:
Y. Abe,
S. Appel,
T. Abrahão,
H. Almazan,
C. Alt,
J. C. dos Anjos,
J. C. Barriere,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
T. Brugière,
C. Buck,
J. Busenitz,
A. Cabrera,
L. Camilleri,
R. Carr,
M. Cerrada,
E. Chauveau,
P. Chimenti,
A. P. Collin,
J. M. Conrad,
J. I. Crespo-Anadón
, et al. (120 additional authors not shown)
Abstract:
The Double Chooz collaboration presents a measurement of the neutrino mixing angle $θ_{13}$ using reactor $\overlineν_{e}$ observed via the inverse beta decay reaction in which the neutron is captured on hydrogen. This measurement is based on 462.72 live days data, approximately twice as much data as in the previous such analysis, collected with a detector positioned at an average distance of 1050…
▽ More
The Double Chooz collaboration presents a measurement of the neutrino mixing angle $θ_{13}$ using reactor $\overlineν_{e}$ observed via the inverse beta decay reaction in which the neutron is captured on hydrogen. This measurement is based on 462.72 live days data, approximately twice as much data as in the previous such analysis, collected with a detector positioned at an average distance of 1050m from two reactor cores. Several novel techniques have been developed to achieve significant reductions of the backgrounds and systematic uncertainties. Accidental coincidences, the dominant background in this analysis, are suppressed by more than an order of magnitude with respect to our previous publication by a multi-variate analysis. These improvements demonstrate the capability of precise measurement of reactor $\overlineν_{e}$ without gadolinium loading. Spectral distortions from the $\overlineν_{e}$ reactor flux predictions previously reported with the neutron capture on gadolinium events are confirmed in the independent data sample presented here. A value of $\sin^{2}2θ_{13} = 0.095^{+0.038}_{-0.039}$(stat+syst) is obtained from a fit to the observed event rate as a function of the reactor power, a method insensitive to the energy spectrum shape. A simultaneous fit of the hydrogen capture events and of the gadolinium capture events yields a measurement of $\sin^{2}2θ_{13} = 0.088\pm0.033$(stat+syst).
△ Less
Submitted 28 December, 2015; v1 submitted 29 October, 2015;
originally announced October 2015.
-
Oscillation of a Rotating Levitated Droplet: Analysis with a Mechanical Model
Authors:
Hiroyuki Kitahata,
Rui Tanaka,
Yuki Koyano,
Satoshi Matsumoto,
Katsuhiro Nishinari,
Tadashi Watanabe,
Koji Hasegawa,
Tetsuya Kanagawa,
Akiko Kaneko,
Yutaka Abe
Abstract:
A droplet of millimeter-to-centimeter scale can exhibit electrostatic levitation, and such levitated droplets can be used for the measurement of the surface tension of the liquids by observing the characteristic frequency of oscillatory deformation. In the present study, a simple mechanical model is proposed by considering a single mode of oscillation in the ellipsoidal deformation of a levitated…
▽ More
A droplet of millimeter-to-centimeter scale can exhibit electrostatic levitation, and such levitated droplets can be used for the measurement of the surface tension of the liquids by observing the characteristic frequency of oscillatory deformation. In the present study, a simple mechanical model is proposed by considering a single mode of oscillation in the ellipsoidal deformation of a levitated rotating droplet. By measuring the oscillation frequency with respect to the rotational speed and oscillation amplitude, it is expected that the accuracy of the surface tension measurement could be improved. Using the proposed model, the dependences of the characteristic frequency of oscillatory deformation and the averaged aspect ratio are calculated with respect to the rotational angular velocity of a rotating droplet. These dependences are found to be consistent with the experimental observations.
△ Less
Submitted 28 July, 2015;
originally announced July 2015.
-
Ortho-positronium observation in the Double Chooz Experiment
Authors:
Y. Abe,
J. C. dos Anjos,
J. C. Barriere,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
C. Buck,
J. Busenitz,
A. Cabrera,
E. Caden,
L. Camilleri,
R. Carr,
M. Cerrada,
P. -J. Chang,
E. Chauveau,
P. Chimenti,
A. P. Collin,
E. Conover,
J. M. Conrad,
J. I. Crespo-Anadon,
K. Crum,
A. S. Cucoanes
, et al. (121 additional authors not shown)
Abstract:
The Double Chooz experiment measures the neutrino mixing angle $θ_{13}$ by detecting reactor $\barν_e$ via inverse beta decay. The positron-neutron space and time coincidence allows for a sizable background rejection, nonetheless liquid scintillator detectors would profit from a positron/electron discrimination, if feasible in large detector, to suppress the remaining background. Standard particle…
▽ More
The Double Chooz experiment measures the neutrino mixing angle $θ_{13}$ by detecting reactor $\barν_e$ via inverse beta decay. The positron-neutron space and time coincidence allows for a sizable background rejection, nonetheless liquid scintillator detectors would profit from a positron/electron discrimination, if feasible in large detector, to suppress the remaining background. Standard particle identification, based on particle dependent time profile of photon emission in liquid scintillator, can not be used given the identical mass of the two particles. However, the positron annihilation is sometimes delayed by the ortho-positronium (o-Ps) metastable state formation, which induces a pulse shape distortion that could be used for positron identification. In this paper we report on the first observation of positronium formation in a large liquid scintillator detector based on pulse shape analysis of single events. The o-Ps formation fraction and its lifetime were measured, finding the values of 44$\%$ $\pm$ 12$\%$ (sys.) $\pm$ 5$\%$ (stat.) and $3.68$ns $\pm$ 0.17ns (sys.) $\pm$ 0.15ns (stat.) respectively, in agreement with the results obtained with a dedicated positron annihilation lifetime spectroscopy setup.
△ Less
Submitted 7 October, 2014; v1 submitted 25 July, 2014;
originally announced July 2014.
-
Improved measurements of the neutrino mixing angle $θ_{13}$ with the Double Chooz detector
Authors:
Y. Abe,
J. C. dos Anjos,
J. C. Barriere,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
C. Buck,
J. Busenitz,
A. Cabrera,
E. Caden,
L. Camilleri,
R. Carr,
M. Cerrada,
P. -J. Chang,
E. Chauveau,
P. Chimenti,
A. P. Collin,
E. Conover,
J. M. Conrad,
J. I. Crespo-Anadón,
K. Crum,
A. S. Cucoanes
, et al. (121 additional authors not shown)
Abstract:
The Double Chooz experiment presents improved measurements of the neutrino mixing angle $θ_{13}$ using the data collected in 467.90 live days from a detector positioned at an average distance of 1050 m from two reactor cores at the Chooz nuclear power plant. Several novel techniques have been developed to achieve significant reductions of the backgrounds and systematic uncertainties with respect t…
▽ More
The Double Chooz experiment presents improved measurements of the neutrino mixing angle $θ_{13}$ using the data collected in 467.90 live days from a detector positioned at an average distance of 1050 m from two reactor cores at the Chooz nuclear power plant. Several novel techniques have been developed to achieve significant reductions of the backgrounds and systematic uncertainties with respect to previous publications, whereas the efficiency of the $\barν_{e}$ signal has increased. The value of $θ_{13}$ is measured to be $\sin^{2}2θ_{13} = 0.090 ^{+0.032}_{-0.029}$ from a fit to the observed energy spectrum. Deviations from the reactor $\barν_{e}$ prediction observed above a prompt signal energy of 4 MeV and possible explanations are also reported. A consistent value of $θ_{13}$ is obtained from a fit to the observed rate as a function of the reactor power independently of the spectrum shape and background estimation, demonstrating the robustness of the $θ_{13}$ measurement despite the observed distortion.
△ Less
Submitted 21 January, 2015; v1 submitted 30 June, 2014;
originally announced June 2014.
-
Precision Muon Reconstruction in Double Chooz
Authors:
Double Chooz collaboration,
Y. Abe,
J. C. dos Anjos,
J. C. Barriere,
E. Baussan,
I. Bekman,
M. Bergevin,
T. J. C. Bezerra,
L. Bezrukov,
E. Blucher,
C. Buck,
J. Busenitz,
A. Cabrera,
E. Caden,
L. Camilleri,
R. Carr,
M. Cerrada,
P. -J. Chang,
E. Chauveau,
P. Chimenti,
A. P. Collin,
E. Conover,
J. M. Conrad,
J. I. Crespo-Anadón,
K. Crum
, et al. (119 additional authors not shown)
Abstract:
We describe a muon track reconstruction algorithm for the reactor anti-neutrino experiment Double Chooz. The Double Chooz detector consists of two optically isolated volumes of liquid scintillator viewed by PMTs, and an Outer Veto above these made of crossed scintillator strips. Muons are reconstructed by their Outer Veto hit positions along with timing information from the other two detector volu…
▽ More
We describe a muon track reconstruction algorithm for the reactor anti-neutrino experiment Double Chooz. The Double Chooz detector consists of two optically isolated volumes of liquid scintillator viewed by PMTs, and an Outer Veto above these made of crossed scintillator strips. Muons are reconstructed by their Outer Veto hit positions along with timing information from the other two detector volumes. All muons are fit under the hypothesis that they are through-going and ultrarelativistic. If the energy depositions suggest that the muon may have stopped, the reconstruction fits also for this hypothesis and chooses between the two via the relative goodness-of-fit. In the ideal case of a through-going muon intersecting the center of the detector, the resolution is ~40 mm in each transverse dimension. High quality muon reconstruction is an important tool for reducing the impact of the cosmogenic isotope background in Double Chooz.
△ Less
Submitted 15 August, 2014; v1 submitted 23 May, 2014;
originally announced May 2014.
-
The Waveform Digitiser of the Double Chooz Experiment: Performance and Quantisation Effects on PhotoMultiplier Tube Signals
Authors:
Y. Abe,
T. Akiri,
A. Cabrera,
B. Courty,
J. V. Dawson,
L. F. G. Gonzalez,
A. Hourlier,
M. Ishitsuka,
H. de Kerret,
D. Kryn,
P. Novella,
M. Obolensky,
S. Perasso,
A. Remoto,
R. Roncin
Abstract:
We present the waveform digitiser used in the Double Chooz experiment. We describe the hardware and the custom-built firmware specifically developed for the experiment. The performance of the device is tested with regards to digitising low light level signals from photomultiplier tubes and measuring pulse charge. This highlights the role of quantisation effects and leads to some general recommenda…
▽ More
We present the waveform digitiser used in the Double Chooz experiment. We describe the hardware and the custom-built firmware specifically developed for the experiment. The performance of the device is tested with regards to digitising low light level signals from photomultiplier tubes and measuring pulse charge. This highlights the role of quantisation effects and leads to some general recommendations on the design and use of waveform digitisers.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
Reactor electron antineutrino disappearance in the Double Chooz experiment
Authors:
Y. Abe,
C. Aberle,
J. C. dos Anjos,
J. C. Barriere,
M. Bergevin,
A. Bernstein,
T. J. C. Bezerra,
L. Bezrukhov,
E. Blucher,
N. S. Bowden,
C. Buck,
J. Busenitz,
A. Cabrera,
E. Caden,
L. Camilleri,
R. Carr,
M. Cerrada,
P. -J. Chang,
P. Chimenti,
T. Classen,
A. P. Collin,
E. Conover,
J. M. Conrad,
J. I. Crespo-Anadón,
K. Crum
, et al. (140 additional authors not shown)
Abstract:
The Double Chooz experiment has observed 8,249 candidate electron antineutrino events in 227.93 live days with 33.71 GW-ton-years (reactor power x detector mass x livetime) exposure using a 10.3 cubic meter fiducial volume detector located at 1050 m from the reactor cores of the Chooz nuclear power plant in France. The expectation in case of theta13 = 0 is 8,937 events. The deficit is interpreted…
▽ More
The Double Chooz experiment has observed 8,249 candidate electron antineutrino events in 227.93 live days with 33.71 GW-ton-years (reactor power x detector mass x livetime) exposure using a 10.3 cubic meter fiducial volume detector located at 1050 m from the reactor cores of the Chooz nuclear power plant in France. The expectation in case of theta13 = 0 is 8,937 events. The deficit is interpreted as evidence of electron antineutrino disappearance. From a rate plus spectral shape analysis we find sin^2 2θ13 = 0.109 \pm 0.030(stat) \pm 0.025(syst). The data exclude the no-oscillation hypothesis at 99.8% CL (2.9σ).
△ Less
Submitted 30 August, 2012; v1 submitted 26 July, 2012;
originally announced July 2012.
