Showing 1–5 of 5 results for author: Önder, A

Deep learning of interfacial curvature: a symmetry-preserving approach for the volume of fluid method

Authors: Asim Önder, Philip Li-Fan Liu

Abstract: Estimation of interface curvature in surface-tension dominated flows is a remaining challenge in Volume of Fluid (VOF) methods. Data-driven methods are recently emerging as a promising alternative in this domain. They outperform conventional methods on coarser grids but diverge with grid refinement. Furthermore, unlike conventional methods, data-driven methods are sensitive to coordinate system an… ▽ More Estimation of interface curvature in surface-tension dominated flows is a remaining challenge in Volume of Fluid (VOF) methods. Data-driven methods are recently emerging as a promising alternative in this domain. They outperform conventional methods on coarser grids but diverge with grid refinement. Furthermore, unlike conventional methods, data-driven methods are sensitive to coordinate system and sign conventions, thus often fail to capture basic symmetry patterns in interfaces. The present work proposes a new data-driven strategy which conserves the symmetries in a cost-effective way and delivers consistent results over a wide range of grids. The method is based on artificial neural networks with deep multilayer perceptron (MLP) architecture which read volume fraction fields on regular grids. The anti-symmetries are preserved with no additional cost by employing a neural network model with input normalization, odd-symmetric activation functions and bias-free neurons. The symmetries are further conserved by height-function inspired rotations and averaging over several different orientations. The new symmetry-preserving MLP model is implemented into a flow solver (OpenFOAM) and tested against conventional schemes in the literature. It shows superior performance compared to its standard counterpart and has similar accuracy and convergence properties with the state-of-the-art conventional method despite using smaller stencil. △ Less

Submitted 20 January, 2023; v1 submitted 13 June, 2022; originally announced June 2022.

Comments: Preprint under review in Journal of Computational Physics

Generation and Breakdown of Surface Streaks in Wind-Driven Aqueous Flow

Authors: Asim Önder, Philip L. -F. Liu, Wu-ting Tsai

Abstract: A bypass transition scenario in a wind-stress driven aqueous flow is analysed using a temporally develo** boundary layer model with accelerating surface drift velocity. The parameters of the model are selected to mimic a wave-tank experiment with a reference wind speed of 5 m/s. To study the boundary layer processes in isolation, a flat free surface is adapted, which inhibits the initiation of w… ▽ More A bypass transition scenario in a wind-stress driven aqueous flow is analysed using a temporally develo** boundary layer model with accelerating surface drift velocity. The parameters of the model are selected to mimic a wave-tank experiment with a reference wind speed of 5 m/s. To study the boundary layer processes in isolation, a flat free surface is adapted, which inhibits the initiation of waves. First, preferred initial perturbations to which the boundary layer is the most sensitive are identified using linear non-normal growth theory. These perturbations are arranged as streamwise-constant vortex pairs located adjacent to the free surface. Subsequently, direct numerical simulations are initialized with these optimal perturbations and streamwise streaks are generated. High-speed streaks penetrate into deeper water layers and undergo sinuous instabilities reminiscent of the instabilities develo** on low-speed streaks in wall-bounded flows. Streak instabilities induce lateral undulations at the free surface, which closely resemble the dye patterns before the onset of waves in wind-wave-tank experiments. The present analysis provides a theoretical background for these experimental observations. △ Less

Submitted 20 December, 2020; originally announced December 2020.

Receptivity and transition in a wave boundary layer over random bottom topography

Authors: Asim Önder, Philip L. -F. Liu

Abstract: Direct numerical simulations are conducted to study the receptivity and transition mechanisms in a solitary wave boundary layer develo** over randomly organized wave-like bottom topography. The boundary layer flow shows a selective response to broadband perturbations from the bottom, and develops streamwise-elongated streaks. When the streaks reach high amplitudes, they indirectly amplify stream… ▽ More Direct numerical simulations are conducted to study the receptivity and transition mechanisms in a solitary wave boundary layer develo** over randomly organized wave-like bottom topography. The boundary layer flow shows a selective response to broadband perturbations from the bottom, and develops streamwise-elongated streaks. When the streaks reach high amplitudes, they indirectly amplify streamwise-elongated vortices through modulating small-scale fluctuations and pressure fields. These stronger vortices in turn stir the boundary layer more effectively and further intensify streaks via the lift-up mechanism. This nonlinear feedback loop increases the sensitivity of the boundary layer to the roughness level and yields dramatic variations among cases sharing the same Reynolds number with differing roughness height. Three different local breakdown scenarios are observed depending on the amplitude of the streaks: (i) two-dimensional wave instabilities in the regions with weak streaks; (ii) inner shear-layer instabilities in the regions with moderate-amplitude streaks; (iii) rapidly growing outer shear-layer instabilities in the regions with highly elevated high-amplitude streaks. Inner instabilities have the slowest growth rate among all transition paths, which confirms the previous predictions on the stabilising role of moderate-amplitude streaks (Önder & Liu, J. Fluid. Mech., vol. 896, 2020, A20). △ Less

Submitted 14 July, 2020; originally announced July 2020.

Stability of the solitary wave boundary layer subject to finite amplitude disturbances

Authors: Asim Önder, Philip Li-Fan Liu

Abstract: The stability and transition in the bottom boundary layer under a solitary wave are analysed in the presence of finite amplitude disturbances. First, the receptivity of the boundary layer is investigated using a linear input-output analysis, in which the environment noise is modelled as distributed body forces. The most dangerous perturbations in a time frame until flow reversal are found to be ar… ▽ More The stability and transition in the bottom boundary layer under a solitary wave are analysed in the presence of finite amplitude disturbances. First, the receptivity of the boundary layer is investigated using a linear input-output analysis, in which the environment noise is modelled as distributed body forces. The most dangerous perturbations in a time frame until flow reversal are found to be arranged as counter-rotating streamwise-constant rollers. One of these roller configurations is then selected and deployed to nonlinear equations, and streaks of various amplitudes are generated via lift-up mechanism. By means of secondary stability analysis and direct numerical simulations, the dual role of streaks in the boundary-layer transition is shown. When the amplitude of streaks remains moderate, these elongated features remain stable until the adverse-pressure-gradient stage and have a dampening effect on the instabilities develo** thereafter. In contrast, when the low-speed streaks reach high amplitudes exceeding 15% of free-stream velocity at the respective phase, they become highly unstable to secondary sinuous modes in the outer shear layers. Consequently, a subcritical transition to turbulence, i.e., bypass transition, can be already initiated in the favourable-pressure-gradient region ahead of the wave crest. △ Less

Submitted 21 November, 2019; originally announced November 2019.

HPC realization of a controlled turbulent round jet using OpenFOAM

Authors: Asim Önder, Johan Meyers

Abstract: The present paper investigates high performance computing abilities of OpenFOAM for a low Reynolds number ($Re_D=2000$) axisymmetric jet subject to multiple zero net mass flux (ZNMF) actuators. First, parallel performance of OpenFOAM is tested by performing a scaling study up to $2048$ processors on a supercomputer of Flemish Supercomputer Center(VSC). Then, a method to improve the parallel effici… ▽ More The present paper investigates high performance computing abilities of OpenFOAM for a low Reynolds number ($Re_D=2000$) axisymmetric jet subject to multiple zero net mass flux (ZNMF) actuators. First, parallel performance of OpenFOAM is tested by performing a scaling study up to $2048$ processors on a supercomputer of Flemish Supercomputer Center(VSC). Then, a method to improve the parallel efficiency is proposed. The method is based on develo** a hybrid concept to calculate the statistical moments. This new concept combines ensemble and time averaging in order to allow data sampling in parallel. The motivation is obtaining a reduction in the walltime to collect turbulent statistics which is observed to be the dominating part in the ZNMF controlled jet flow. Employing this parallel statistical averaging approach in combination with regular grid partitioning parallelism, allowed us conducting DNS cases on $P=624$ processors with an overall speed-up of $S_e=540.56$ and a parallel efficiency of $E_e=0.87$. The parallelization using only grid partitioning exhibited inferior performance with $S_e=423.94$ and $E_e=0.68$. In addition to develop a methodology to increase the parallel performance, we reduced the time step cost of the existing unsteady solver as well. To this end, an incremental projection method is implemented into OpenFOAM and a performance gain above $30\%$ is realized. △ Less

Submitted 27 June, 2014; originally announced June 2014.