-
A robust consensus + innovations-based distributed parameter estimator
Authors:
Nicolai Lorenz-Meyer,
Juan G. Rueda-Escobedo,
Jaime A. Moreno,
Johannes Schiffer
Abstract:
While distributed parameter estimation has been extensively studied in the literature, little has been achieved in terms of robust analysis and tuning methods in the presence of disturbances. However, disturbances such as measurement noise and model mismatches occur in any real-world setting. Therefore, providing tuning methods with specific robustness guarantees would greatly benefit the practica…
▽ More
While distributed parameter estimation has been extensively studied in the literature, little has been achieved in terms of robust analysis and tuning methods in the presence of disturbances. However, disturbances such as measurement noise and model mismatches occur in any real-world setting. Therefore, providing tuning methods with specific robustness guarantees would greatly benefit the practical application. To address these issues, we recast the error dynamics of a continuous-time version of the widely used consensus + innovations-based distributed parameter estimator to reflect the error dynamics induced by the classical gradient descent algorithm. This paves the way for the construction of a strong Lyapunov function. Based on this result, we derive linear matrix inequality-based tools for tuning the algorithm gains such that a guaranteed upper bound on the L2-gain with respect to parameter variations, measurement noise, and disturbances in the communication channels is achieved. An application example illustrates the efficiency of the method.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Dynamic state and parameter estimation in multi-machine power systems - Experimental demonstration using real-world PMU-measurements
Authors:
Nicolai Lorenz-Meyer,
René Suchantke,
Johannes Schiffer
Abstract:
Dynamic state and parameter estimation (DSE) plays a key role for reliably monitoring and operating future, power-electronics-dominated power systems. While DSE is a very active research field, experimental applications of proposed algorithms to real-world systems remain scarce. This motivates the present paper, in which we demonstrate the effectiveness of a DSE algorithm previously presented by p…
▽ More
Dynamic state and parameter estimation (DSE) plays a key role for reliably monitoring and operating future, power-electronics-dominated power systems. While DSE is a very active research field, experimental applications of proposed algorithms to real-world systems remain scarce. This motivates the present paper, in which we demonstrate the effectiveness of a DSE algorithm previously presented by parts of the authors with real-world data collected by a Phasor Measurement Unit (PMU) at a substation close to a power plant within the extra-high voltage grid of Germany. To this end, at first we derive a suitable map** of the real-world PMU-measurements recorded at a substation close to the power plant to the terminal bus of the power plants' synchronous generator (SG). This map** considers the high-voltage (HV) transmission line, the tap-changing transformer and the auxiliary system of the power plant. Next, we introduce several practically motivated extensions to the estimation algorithm, which significantly improve its practical performance with real-world measurements. Finally, we successfully validate the algorithm experimentally in an auto- as well as a cross-validation.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
Data-Driven Control for Linear Discrete-Time Delay Systems
Authors:
Juan G. Rueda-Escobedo,
Emilia Fridman,
Johannes Schiffer
Abstract:
The increasing ease of obtaining and processing data together with the growth in system complexity has sparked the interest in moving from conventional model-based control design towards data-driven concepts. Since in many engineering applications time delays naturally arise and are often a source of instability, we contribute to the data-driven control field by introducing data-based formulas for…
▽ More
The increasing ease of obtaining and processing data together with the growth in system complexity has sparked the interest in moving from conventional model-based control design towards data-driven concepts. Since in many engineering applications time delays naturally arise and are often a source of instability, we contribute to the data-driven control field by introducing data-based formulas for state feedback control design in linear discrete-time time-delay systems with uncertain delays. With the proposed approach, the problems of system stabilization as well as of guaranteed cost and $H_{\infty}$ control design are treated in a unified manner. Extensions to determine the system delays and to ensure robustness in the event of noisy data are also provided.
△ Less
Submitted 27 July, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
A Globally Convergent State Observer for Multimachine Power Systems with Lossy Lines
Authors:
Alexey Bobtsov,
Romeo Ortega,
Nikolay Nikolaev,
Johannes Schiffer
Abstract:
We present the first solution to the problem of estimation of the state of multimachine power systems with lossy transmission lines. We consider the classical three-dimensional \fluxdecay" model of the power system and assume that the active and reactive power as well as the rotor angle and excitation voltage at each generator is available for measurement|a scenario that is feasible with current t…
▽ More
We present the first solution to the problem of estimation of the state of multimachine power systems with lossy transmission lines. We consider the classical three-dimensional \fluxdecay" model of the power system and assume that the active and reactive power as well as the rotor angle and excitation voltage at each generator is available for measurement|a scenario that is feasible with current technology. The design of the observer relies on two recent developments proposed by the authors: a parameter estimation based approach to the problem of state estimation and the use of the dynamic regressor extension and mixing technique to estimate these parameters. Thanks to the combination of these techniques it is possible to overcome the problem of lack of persistent excitation that stymies the application of standard observer designs. Simulation results illustrate the performance of the proposed observer.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
-
State Observation of Power Systems Equipped with Phasor Measurement Units: The Case of Fourth Order Flux-Decay Model
Authors:
Alexey Bobtsov,
Romeo Ortega,
Nikolay Nikolaev,
Johannes Schiffer,
M. Nicolai L. Lorenz-Meyer
Abstract:
The problem of effective use of Phasor Measurement Units (PMUs) to enhance power systems awareness and security is a topic of key interest. The central question to solve is how to use this new measurements to reconstruct the state of the system. In this paper we provide the first solution to the problem of (globally convergent) state estimation of multimachine power systems equipped with PMUs and…
▽ More
The problem of effective use of Phasor Measurement Units (PMUs) to enhance power systems awareness and security is a topic of key interest. The central question to solve is how to use this new measurements to reconstruct the state of the system. In this paper we provide the first solution to the problem of (globally convergent) state estimation of multimachine power systems equipped with PMUs and described by the fourth order flux-decay model. This work is a significant extension of our previous result, where this problem was solved for the simpler third order model, for which it is possible to recover algebraically part of the unknown state. Unfortunately, this property is lost in the more accurate fourth order model, significantly complicating the state observation task. The design of the observer relies on two recent developments proposed by the authors, a parameter estimation based approach to the problem of state estimation and the use of the Dynamic Regressor Extension and Mixing (DREM) technique to estimate these parameters. The use of DREM allows us to overcome the problem of lack of persistent excitation that stymies the application of standard parameter estimation designs. Simulation results illustrate the latter fact and show the improved performance of the proposed observer with respect to a locally stable gradient-descent based observer.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Data-Driven Internal Model Control of Second-Order Discrete Volterra Systems
Authors:
Juan G. Rueda-Escobedo,
Johannes Schiffer
Abstract:
The increase in system complexity paired with a growing availability of operational data has motivated a change in the traditional control design paradigm. Instead of modeling the system by first principles and then proceeding with a (model-based) control design, the data-driven control paradigm proposes to directly characterize the controller from data. By exploiting a fundamental result of Wille…
▽ More
The increase in system complexity paired with a growing availability of operational data has motivated a change in the traditional control design paradigm. Instead of modeling the system by first principles and then proceeding with a (model-based) control design, the data-driven control paradigm proposes to directly characterize the controller from data. By exploiting a fundamental result of Willems and collaborators, this approach has been successfully applied to linear systems, yielding data-based formulas for many classical linear controllers. In the present paper, the data-driven approach is extended to a class of nonlinear systems, namely second-order discrete Volterra systems. Two main contributions are made for this class of systems. At first, we show that - under a necessary and sufficient condition on the input data excitation - a data-based system representation can be derived from input-output data and used to replace an explicit system model. That is, the fundamental result of Willems et al. is extended to this class of systems. Subsequently a data-driven internal model control formula for output-tracking is derived. The approach is illustrated via two simulation examples.
△ Less
Submitted 5 October, 2020; v1 submitted 31 March, 2020;
originally announced March 2020.
-
PMU-Based Decentralized Mixed Algebraic and Dynamic State Observation in Multi-Machine Power Systems
Authors:
M. Nicolai L. Lorenz-Meyer,
Alexey A. Bobtsov,
Romeo Ortega,
Nikolay Nikolaev,
Johannes Schiffer
Abstract:
We propose a novel decentralized mixed algebraic and dynamic state observation method for multi-machine power systems with unknown inputs and equipped with Phasor Measurement Units (PMUs). More specifically, we prove that for the third-order flux-decay model of a synchronous generator, the local PMU measurements give enough information to reconstruct algebraically the load angle and the quadrature…
▽ More
We propose a novel decentralized mixed algebraic and dynamic state observation method for multi-machine power systems with unknown inputs and equipped with Phasor Measurement Units (PMUs). More specifically, we prove that for the third-order flux-decay model of a synchronous generator, the local PMU measurements give enough information to reconstruct algebraically the load angle and the quadrature-axis internal voltage. Due to the algebraic structure a high numerical efficiency is achieved, which makes the method applicable to large scale power systems. Also, we prove that the relative shaft speed can be globally estimated combining a classical Immersion and Invariance (I&I) observer with - the recently introduced - dynamic regressor and mixing (DREM) parameter estimator. This adaptive observer ensures global convergence under weak excitation assumptions that are verified in applications. The proposed method does not require the measurement of exogenous inputs signals such as the field voltage and the mechanical torque nor the knowledge of mechanical subsystem parameters.
△ Less
Submitted 10 November, 2020; v1 submitted 31 March, 2020;
originally announced March 2020.
-
Generalized Parameter Estimation-based Observers: Application to Power Systems and Chemical-Biological Reactors
Authors:
Romeo Ortega,
Alexey Bobtsov,
Nikolay Nikolaev,
Johannes Schiffer,
Denis Dochain
Abstract:
In this paper we propose a new state observer design technique for nonlinear systems. It consists of an extension of the recently introduced parameter estimation-based observer, which is applicable for systems verifying a particular algebraic constraint. In contrast to the previous observer, the new one avoids the need of implementing an open loop integration that may stymie its practical applicat…
▽ More
In this paper we propose a new state observer design technique for nonlinear systems. It consists of an extension of the recently introduced parameter estimation-based observer, which is applicable for systems verifying a particular algebraic constraint. In contrast to the previous observer, the new one avoids the need of implementing an open loop integration that may stymie its practical application. We give two versions of this observer, one that ensures asymptotic convergence and the second one that achieves convergence in finite time. In both cases, the required excitation conditions are strictly weaker than the classical persistent of excitation assumption. It is shown that the proposed technique is applicable to the practically important examples of multimachine power systems and chemical-biological reactors.
△ Less
Submitted 13 November, 2020; v1 submitted 24 March, 2020;
originally announced March 2020.
-
Robustness of Distributed Averaging Control in Power Systems: Time Delays & Dynamic Communication Topology
Authors:
Johannes Schiffer,
Florian Dörfler,
Emilia Fridman
Abstract:
Distributed averaging-based integral (DAI) controllers are becoming increasingly popular in power system applications. The literature has thus far primarily focused on disturbance rejection, steady-state optimality and adaption to complex physical system models without considering uncertainties on the cyber and communication layer nor their effect on robustness and performance. In this paper, we d…
▽ More
Distributed averaging-based integral (DAI) controllers are becoming increasingly popular in power system applications. The literature has thus far primarily focused on disturbance rejection, steady-state optimality and adaption to complex physical system models without considering uncertainties on the cyber and communication layer nor their effect on robustness and performance. In this paper, we derive sufficient delay-dependent conditions for robust stability of a secondary-frequency-DAI-controlled power system with respect to heterogeneous communication delays, link failures and packet losses. Our analysis takes into account both constant as well as fast-varying delays, and it is based on a common strictly decreasing Lyapunov-Krasovskii functional. The conditions illustrate an inherent trade-off between robustness and performance of DAI controllers. The effectiveness and tightness of our stability certificates are illustrated via a numerical example based on Kundur's four-machine-two-area test system.
△ Less
Submitted 6 February, 2017; v1 submitted 26 July, 2016;
originally announced July 2016.
-
A survey on modeling of microgrids - from fundamental physics to phasors and voltage sources
Authors:
Johannes Schiffer,
Daniele Zonetti,
Romeo Ortega,
Aleksandar Stankovic,
Tevfik Sezi,
Joerg Raisch
Abstract:
Microgrids have been identified as key components of modern electrical systems to facilitate the integration of renewable distributed generation units. Their analysis and controller design requires the development of advanced (typically model-based) techniques naturally posing an interesting challenge to the control community. Although there are widely accepted reduced order models to describe the…
▽ More
Microgrids have been identified as key components of modern electrical systems to facilitate the integration of renewable distributed generation units. Their analysis and controller design requires the development of advanced (typically model-based) techniques naturally posing an interesting challenge to the control community. Although there are widely accepted reduced order models to describe the dynamic behavior of microgrids, they are typically presented without details about the reduction procedure---hampering the understanding of the physical phenomena behind them. Preceded by an introduction to basic notions and definitions in power systems, the present survey reviews key characteristics and main components of a microgrid. We introduce the reader to the basic functionality of DC/AC inverters, as well as to standard operating modes and control schemes of inverter-interfaced power sources in microgrid applications. Based on this exposition and starting from fundamental physics, we present detailed dynamical models of the main microgrid components. Furthermore, we clearly state the underlying assumptions which lead to the standard reduced model with inverters represented by controllable voltage sources, as well as static network and load representations, hence, providing a complete modular model derivation of a three-phase inverter-based microgrid.
△ Less
Submitted 17 May, 2016; v1 submitted 1 May, 2015;
originally announced May 2015.
