Showing 1–33 of 33 results for author: Keilegavlen, E

A hybrid upwind scheme for two-phase flow in fractured porous media

Authors: Enrico Ballini, Luca Formaggia, Alessio Fumagalli, Eirik Keilegavlen, Anna Scotti

Abstract: Simulating the flow of two fluid phases in porous media is a challenging task, especially when fractures are included in the simulation. Fractures may have highly heterogeneous properties compared to the surrounding rock matrix, significantly affecting fluid flow, and at the same time hydraulic aperture that are much smaller than any other characteristic sizes in the domain. Generally, flow simula… ▽ More Simulating the flow of two fluid phases in porous media is a challenging task, especially when fractures are included in the simulation. Fractures may have highly heterogeneous properties compared to the surrounding rock matrix, significantly affecting fluid flow, and at the same time hydraulic aperture that are much smaller than any other characteristic sizes in the domain. Generally, flow simulators face difficulties with counter-current flow, generated by gravity and pressure gradients, which hinders the convergence of non-linear solvers (Newton). In this work, we model the fracture geometry with a mixed-dimensional discrete fracture network, thus lightening the computational burden associated to an equi-dimensional representation. We address the issue of counter-current flows with appropriate spatial discretization of the advective fluid fluxes, with the aim of improving the convergence speed of the non-linear solver. In particular, the extension of the hybrid upwinding to the mixed-dimensional framework, with the use of a phase potential upstreaming at the interfaces of subdomains. We test the method across several cases with different flow regimes and fracture network geometry. Results show robustness of the chosen discretization and a consistent improvements, in terms of Newton iterations, compared to use the phase potential upstreaming everywhere. △ Less

Submitted 6 July, 2024; originally announced July 2024.

Two-point stress approximation: A simple and robust finite volume method for linearized (poro-)mechanics and Stokes flow

Authors: Jan Martin Nordbotten, Eirik Keilegavlen

Abstract: We provide a unified continuum formulation of linearized mechanics, Stokes' flow and poromechanics in terms of a conservation structure. Starting from this formulation, we construct corresponding simple and robust finite volume discretizations for these physical systems, based only on co-located, cell-centered variables. These discretizations have a minimal discretization stencil, using only the t… ▽ More We provide a unified continuum formulation of linearized mechanics, Stokes' flow and poromechanics in terms of a conservation structure. Starting from this formulation, we construct corresponding simple and robust finite volume discretizations for these physical systems, based only on co-located, cell-centered variables. These discretizations have a minimal discretization stencil, using only the two neighboring cells to a face to calculate numerical stresses and fluxes. We show well-posedness of a weak statement of the continuous formulation in appropriate Hilbert spaces, and identify the appropriate weighted norms for the problem. For the discrete approximations, we prove stability and convergence, both of which are robust in terms of the material parameters. Numerical experiments in 3D support the theoretical results, and provide additional insight into the practical performance of the discretization. △ Less

Submitted 8 July, 2024; v1 submitted 16 May, 2024; originally announced May 2024.

Automated solver selection for simulation of multiphysics processes in porous media

Authors: Yury Zabegaev, Eirik Keilegavlen, Einar Iversen, Inga Berre

Abstract: Porous media processes involve various physical phenomena such as mechanical deformation, transport, and fluid flow. Accurate simulations must capture the strong couplings between these phenomena. Choosing an efficient solver for the multiphysics problem usually entails the decoupling into subproblems related to separate physical phenomena. Then, the suitable solvers for each subproblem and the it… ▽ More Porous media processes involve various physical phenomena such as mechanical deformation, transport, and fluid flow. Accurate simulations must capture the strong couplings between these phenomena. Choosing an efficient solver for the multiphysics problem usually entails the decoupling into subproblems related to separate physical phenomena. Then, the suitable solvers for each subproblem and the iteration scheme must be chosen. The wide range of options for the solver components makes finding the optimum difficult and time-consuming; moreover, solvers come with numerical parameters that need to be optimized. As a further complication, the solver performance may depend on the physical regime of the simulation model, which may vary with time. Switching a solver with respect to the dominant process can be beneficial, but the threshold of when to switch solver is unclear and complicated to analyze. We address this challenge by develo** a machine learning framework that automatically searches for the optimal solver for a given multiphysics simulation setup, based on statistical data from previously solved problems. For a series of problems, exemplified by successive time steps in a time-dependent simulation, the framework updates and improves its decision model online during the simulation. We show how it outperforms preselected state-of-the-art solvers for test problem setups. The examples are based on simulations of poromechanics and simulations of flow and transport. For the quasi-static linear Biot model, we demonstrate automated tuning of numerical solver parameters by showing how the L-parameter of the so-called Fixed-Stress preconditioner can be optimized. Motivated by a test example where the main heat transfer mechanism changes between convection and diffusion, we discuss how the solver selector can dynamically switch solvers when the dominant physical phenomenon changes with time. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 22 pages, 14 figures

Copula modeling and uncertainty propagation in field-scale simulation of CO$_2$ fault leakage

Authors: Per Pettersson, Eirik Keilegavlen, Tor Harald Sandve, Sarah Gasda, Sebastian Krumscheid

Abstract: Subsurface storage of CO$_2$ is an important means to mitigate climate change, and to investigate the fate of CO$_2$ over several decades in vast reservoirs, numerical simulation based on realistic models is essential. Faults and other complex geological structures introduce modeling challenges as their effects on storage operations are uncertain due to limited data. In this work, we present a com… ▽ More Subsurface storage of CO$_2$ is an important means to mitigate climate change, and to investigate the fate of CO$_2$ over several decades in vast reservoirs, numerical simulation based on realistic models is essential. Faults and other complex geological structures introduce modeling challenges as their effects on storage operations are uncertain due to limited data. In this work, we present a computational framework for forward propagation of uncertainty, including stochastic upscaling and copula representation of flow functions for a CO$_2$ storage site using the Vette fault zone in the Smeaheia formation in the North Sea as a test case. The upscaling method leads to a reduction of the number of stochastic dimensions and the cost of evaluating the reservoir model. A viable model that represents the upscaled data needs to capture dependencies between variables, and allow sampling. Copulas provide representation of dependent multidimensional random variables and a good fit to data, allow fast sampling, and coupling to the forward propagation method via independent uniform random variables. The non-stationary correlation within some of the upscaled flow function are accurately captured by a data-driven transformation model. The uncertainty in upscaled flow functions and other parameters are propagated to uncertain leakage estimates using numerical reservoir simulation of a two-phase system. The expectations of leakage are estimated by an adaptive stratified sampling technique, where samples are sequentially concentrated to regions of the parameter space to greedily maximize variance reduction. We demonstrate cost reduction compared to standard Monte Carlo of one or two orders of magnitude for simpler test cases with only fault and reservoir layer permeabilities assumed uncertain, and factors 2--8 cost reduction for stochastic multi-phase flow properties and more complex stochastic models. △ Less

Submitted 10 December, 2023; originally announced December 2023.

Flexible and rigorous numerical modelling of multiphysics processes in fractured porous media using PorePy

Authors: Ivar Stefansson, Jhabriel Varela, Eirik Keilegavlen, Inga Berre

Abstract: Multiphysics processes in fractured porous media is a research field of importance for several subsurface applications and has received considerable attention over the last decade. The dynamics are characterised by strong couplings between processes as well as interaction between the processes and the structure of the fractured medium itself. The rich range of behavior calls for explorative mathem… ▽ More Multiphysics processes in fractured porous media is a research field of importance for several subsurface applications and has received considerable attention over the last decade. The dynamics are characterised by strong couplings between processes as well as interaction between the processes and the structure of the fractured medium itself. The rich range of behavior calls for explorative mathematical modelling, such as experimentation with constitutive laws and novel coupling concepts between physical processes. Moreover, efficient simulations of the strong couplings between multiphysics processes and geological structures require the development of tailored numerical methods. We present a modelling framework and its implementation in the open-source simulation toolbox PorePy, which is designed for rapid prototy** of multiphysics processes in fractured porous media. PorePy uses a mixed-dimensional representation of the fracture geometry and generally applies fully implicit couplings between processes. The code design follows the paradigms of modularity and differentiable programming, which together allow for extreme flexibility in experimentation with governing equations with minimal changes to the code base. The code integrity is supported by a multilevel testing framework ensuring the reliability of the code. We present our modelling framework within a context of thermo-poroelasticity in deformable fractured porous media, illustrating the close relation between the governing equations and the source code. We furthermore discuss the design of the testing framework and present simulations showcasing the extendibility of PorePy, as well as the type of results that can be produced by mixed-dimensional simulation tools. △ Less

Submitted 8 August, 2023; originally announced August 2023.

Comments: Run scripts at DOI:10.5281/zenodo.8211479

Modeling of mixed-mechanism stimulation for the enhancement of geothermal reservoirs

Authors: Hau Trung Dang, Eirik Keilegavlen, Inga Berre

Abstract: Hydraulic stimulation is a critical process for increasing the permeability of fractured geothermal reservoirs. This technique relies on coupled hydromechanical processes induced by reservoir stimulation through pressurized fluid injection into the rock formation. The injection of fluids causes poromechanical stress changes that can lead to the dilation of fractures due to fracture slip and to ten… ▽ More Hydraulic stimulation is a critical process for increasing the permeability of fractured geothermal reservoirs. This technique relies on coupled hydromechanical processes induced by reservoir stimulation through pressurized fluid injection into the rock formation. The injection of fluids causes poromechanical stress changes that can lead to the dilation of fractures due to fracture slip and to tensile fracture opening and propagation, so-called mixed-mechanism stimulation. The effective permeability of the rock is particularly enhanced when new fractures connect with pre-existing fractures. Mixed-mechanism stimulation can significantly improve the productivity of geothermal reservoirs, and the technique is especially important in reservoirs where the natural permeability of the rock is insufficient to allow for commercial flow rates. This paper presents a modeling approach for simulating the deformation and expansion of fracture networks in porous media under the influence of anisotropic stress and fluid injection. It utilizes a coupled hydromechanical model for poroelastic, fractured media. Fractures are governed by contact mechanics and allowed to grow and connect through a fracture propagation model. To conduct numerical simulations, we employ a twolevel approach, combining a finite volume method for poroelasticity with a finite element method for fracture propagation. The study investigates the impact of injection rate, matrix permeability, and stress anisotropy on stimulation outcomes. By analyzing these factors, we can better understand the behavior of fractured geothermal reservoirs under mixedmechanism stimulation. △ Less

Submitted 28 April, 2023; originally announced May 2023.

Effective Preconditioners for Mixed-Dimensional Scalar Elliptic Problems

Authors: Xiaozhe Hu, Eirik Keilegavlen, Jan M. Nordbotten

Abstract: Discretization of flow in fractured porous media commonly lead to large systems of linear equations that require dedicated solvers. In this work, we develop an efficient linear solver and its practical implementation for mixed-dimensional scalar elliptic problems. We design an effective preconditioner based on approximate block factorization and algebraic multigrid techniques. Numerical results on… ▽ More Discretization of flow in fractured porous media commonly lead to large systems of linear equations that require dedicated solvers. In this work, we develop an efficient linear solver and its practical implementation for mixed-dimensional scalar elliptic problems. We design an effective preconditioner based on approximate block factorization and algebraic multigrid techniques. Numerical results on benchmarks with complex fracture structures demonstrate the effectiveness of the proposed linear solver and its robustness with respect to different physical and discretization parameters. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Multiscale simulation of injection-induced fracture slip and wing-crack propagation in poroelastic media

Authors: Hau Trung Dang, Inga Berre, Eirik Keilegavlen

Abstract: In fractured poroelastic media under high differential stress, the shearing of fractures and faults and the corresponding propagation of wing cracks can be induced by fluid injection. Focusing on low-pressure stimulation with fluid pressures below the minimum principal stress but above the threshold required to overcome the fracture's frictional resistance to slip, this paper presents a mathematic… ▽ More In fractured poroelastic media under high differential stress, the shearing of fractures and faults and the corresponding propagation of wing cracks can be induced by fluid injection. Focusing on low-pressure stimulation with fluid pressures below the minimum principal stress but above the threshold required to overcome the fracture's frictional resistance to slip, this paper presents a mathematical model and a numerical solution approach for coupling fluid flow with fracture shearing and propagation. Numerical challenges are related to the strong coupling between hydraulic and mechanical processes, the material discontinuity the fractures represent in the medium, the wide range of spatial scales involved, and the strong effect that fracture deformation and propagation have on the physical processes. The solution approach is based on a multiscale strategy. In the macroscale model, flow in and poroelastic deformation of the matrix are coupled with the flow in the fractures and fracture contact mechanics, allowing fractures to frictionally slide. Fracture propagation is handled at the microscale, where the maximum tangential stress criterion triggers the propagation of fractures, and Paris' law governs the fracture growth processes. Simulations show how the shearing of a fracture due to fluid injection is linked to fracture propagation, including cases with hydraulically and mechanically interacting fractures. △ Less

Submitted 22 March, 2022; v1 submitted 3 December, 2021; originally announced December 2021.

Modelling and discretization of flow in porous media with thin, full-tensor permeability inclusions

Authors: Michele Starnoni, Inga Berre, Eirik Keilegavlen, Jan M. Nordbotten

Abstract: When modelling fluid flow in fractured reservoirs, it is common to represent the fracturesas lower-dimensional inclusions embedded in the host medium. Existing discretizationsof flow in porous media with thin inclusions assume that the principal directions of theinclusion permeability tensor are aligned with the inclusion orientation. While this mod-elling assumption works well with tensile fractu… ▽ More When modelling fluid flow in fractured reservoirs, it is common to represent the fracturesas lower-dimensional inclusions embedded in the host medium. Existing discretizationsof flow in porous media with thin inclusions assume that the principal directions of theinclusion permeability tensor are aligned with the inclusion orientation. While this mod-elling assumption works well with tensile fractures, it may fail in the context of faults,where the damage zone surrounding the main slip surface may introduce anisotropy thatis not aligned with the main fault orientation. In this paper, we introduce a generalizeddimensional reduced model which preserves full-tensor permeability effects also in theout-of-plane direction of the inclusion. The governing equations of flow for the lower-dimensional objects are obtained through vertical averaging. We present a framework fordiscretization of the resulting mixed-dimensional problem, aimed at easy adaptation ofexisting simulation tools. We give numerical examples that show the failure of existingformulations when applied to anisotropic faulted porous media, and go on to show theconvergence of our method in both 2D and 3D △ Less

Submitted 21 January, 2021; originally announced January 2021.

A posteriori error estimates for hierarchical mixed-dimensional elliptic equations

Authors: Jhabriel Varela, Elyes Ahmed, Eirik Keilegavlen, Jan Martin Nordbotten, Florin Adrian Radu

Abstract: Mixed-dimensional elliptic equations exhibiting a hierarchical structure are commonly used to model problems with high aspect ratio inclusions, such as flow in fractured porous media. We derive general abstract estimates based on the theory of functional a posteriori error estimates, for which guaranteed upper bounds for the primal and dual variables and two-sided bounds for the primal-dual pair a… ▽ More Mixed-dimensional elliptic equations exhibiting a hierarchical structure are commonly used to model problems with high aspect ratio inclusions, such as flow in fractured porous media. We derive general abstract estimates based on the theory of functional a posteriori error estimates, for which guaranteed upper bounds for the primal and dual variables and two-sided bounds for the primal-dual pair are obtained. We improve on the abstract results obtained with the functional approach by proposing four different ways of estimating the residual errors based on the extent the approximate solution has conservation properties, i.e.: (1) no conservation, (2) subdomain conservation, (3) grid-level conservation, and (4) exact conservation. This treatment results in sharper and fully computable estimates when mass is conserved either at the grid level or exactly, with a comparable structure to those obtained from grid-based a posteriori techniques. We demonstrate the practical effectiveness of our theoretical results through numerical experiments using four different discretization methods for synthetic problems and applications based on benchmarks of flow in fractured porous media. △ Less

Submitted 19 April, 2022; v1 submitted 20 January, 2021; originally announced January 2021.

Numerical modelling of convection-driven cooling, deformation and fracturing of thermo-poroelastic media

Authors: Ivar Stefansson, Eirik Keilegavlen, Sæunn Halldórsdóttir, Inga Berre

Abstract: Convection-driven cooling in porous media influences thermo-poro-mechanical stresses, thereby causing deformation. These processes are strongly influenced by the presence of fractures, which dominate flow and heat transfer. At the same time, the fractures deform and propagate in response to changes in the stress state. Mathematically, the model governing the physics is tightly coupled and must acc… ▽ More Convection-driven cooling in porous media influences thermo-poro-mechanical stresses, thereby causing deformation. These processes are strongly influenced by the presence of fractures, which dominate flow and heat transfer. At the same time, the fractures deform and propagate in response to changes in the stress state. Mathematically, the model governing the physics is tightly coupled and must account for the strong discontinuities introduced by the fractures. Over the last decade, and motivated by a number of porous media applications, research into such coupled models has advanced modelling of processes in porous media substantially. Building on this effort, this work presents a novel model that couples flow, heat transfer, deformation, and propagation of fractures with flow, heat transfer, and thermo-poroelasticity in the matrix. The model is based on explicit representation of fractures in the porous medium, and discretised using multi-point finite volume methods. Frictional contact and non-penetration conditions for the fractures are handled through active set methods, while a propagation criterion based on stress intensity factors governs fracture extension. Considering both forced and natural convection processes, the numerical results show the intricate nature of thermo-poromechanical fracture deformation and propagation. △ Less

Submitted 11 December, 2020; originally announced December 2020.

A fully coupled numerical model of thermo-hydro-mechanical processes and fracture contact mechanics in porous media

Authors: Ivar Stefansson, Inga Berre, Eirik Keilegavlen

Abstract: A range of phenomena in the subsurface is characterised by the interplay between coupled thermal, hydraulic and mechanical processes and deforming structures such as fractures. Modelling subsurface dynamics can provide valuable phenomenological understanding, but requires models which faithfully represent the dynamics involved; these models, therefore are themselves highly complex. This paper pr… ▽ More A range of phenomena in the subsurface is characterised by the interplay between coupled thermal, hydraulic and mechanical processes and deforming structures such as fractures. Modelling subsurface dynamics can provide valuable phenomenological understanding, but requires models which faithfully represent the dynamics involved; these models, therefore are themselves highly complex. This paper presents a mixed-dimensional thermo-hydro-mechanical model designed to capture the process-structure interplay using a discrete-fracture-matrix framework. It incorporates tightly coupled thermo-hydro-mechanical processes based on laws for momentum, mass and entropy in subdomains representing the matrix and the lower-dimensional fractures and fracture intersections. The deformation of explicitly represented fractures is modelled by contact mechanics relations and a Coulomb friction law, with particular attention on coupling of fracture dilation to the governing equations in both fractures and matrix. The model is discretised using multi-point finite volumes for the balance equations and a semismooth Newton scheme for the contact conditions and is implemented in the open source fracture simulation toolbox PorePy. Finally, simulation studies demonstrate the model's convergence, investigate process-structure coupling effects, explore different fracture dilation models and show an application of the model to a 3d geothermal pressure stimulation and long-term cooling scenario. △ Less

Submitted 14 May, 2021; v1 submitted 14 August, 2020; originally announced August 2020.

Numerical modeling of wing crack propagation accounting for fracture contact mechanics

Authors: Hau Dang-Trung, Eirik Keilegavlen, Inga Berre

Abstract: As a consequence of shearing, wing cracks can emerge from pre-existing fractures. The process involves the interaction of sliding of the existing fracture surfaces and the tensile material failure that creates wing cracks. This work devises a numerical model to investigate how wing cracks emerge, propagate and connect pre-existing fractures under shear processes. A mathematical and numerical model… ▽ More As a consequence of shearing, wing cracks can emerge from pre-existing fractures. The process involves the interaction of sliding of the existing fracture surfaces and the tensile material failure that creates wing cracks. This work devises a numerical model to investigate how wing cracks emerge, propagate and connect pre-existing fractures under shear processes. A mathematical and numerical model for wing crack propagation based on linear elastic fracture mechanics that also accounts for fracture contact mechanics is presented. Computational efficiency is ensured by an adaptive remeshing technique. The numerical model is verified and validated through a comparison of the analytical and experimental results. Additional numerical examples illustrate the performance of the method for complex test cases where wing-cracks develop for multiple pre-existing and interacting fractures. △ Less

Submitted 9 September, 2020; v1 submitted 5 June, 2020; originally announced June 2020.

Verification benchmarks for single-phase flow in three-dimensional fractured porous media

Authors: Inga Berre, Wietse M. Boon, Bernd Flemisch, Alessio Fumagalli, Dennis Gläser, Eirik Keilegavlen, Anna Scotti, Ivar Stefansson, Alexandru Tatomir, Konstantin Brenner, Samuel Burbulla, Philippe Devloo, Omar Duran, Marco Favino, Julian Hennicker, I-Hsien Lee, Konstantin Lipnikov, Roland Masson, Klaus Mosthaf, Maria Giuseppina Chiara Nestola, Chuen-Fa Ni, Kirill Nikitin, Philipp Schädle, Daniil Svyatskiy, Ruslan Yanbarisov , et al. (1 additional authors not shown)

Abstract: Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flo… ▽ More Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flow in three-dimensional fractured porous media. The cases are specifically designed to test the methods' capabilities in handling various complexities common to the geometrical structures of fracture networks. Based on an open call for participation, results obtained with 17 numerical methods were collected. This paper presents the underlying mathematical model, an overview of the features of the participating numerical methods, and their performance in solving the benchmark cases. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Finite volume discretisation of fracture deformation in thermo-poroelastic media

Authors: Ivar Stefansson, Inga Berre, Eirik Keilegavlen

Abstract: This paper presents a model where thermo-hydro-mechanical processes are coupled to a deformation model for preexisting fractures. The model is formulated within a discrete-fracture-matrix framework where the rock matrix and the fractures are considered as individual subdomains, and interaction between them takes place on the matrix-fracture interfaces. A finite volume discretisation implemented in… ▽ More This paper presents a model where thermo-hydro-mechanical processes are coupled to a deformation model for preexisting fractures. The model is formulated within a discrete-fracture-matrix framework where the rock matrix and the fractures are considered as individual subdomains, and interaction between them takes place on the matrix-fracture interfaces. A finite volume discretisation implemented in the simulation toolbox PorePy is presented and applied in a simulation showcasing the effects of the different mechanisms on fracture deformation governed by contact mechanics, as well as their different timescales. △ Less

Submitted 14 February, 2020; originally announced February 2020.

Comments: 8 pages, 4 figures

An Introduction to Multi-Point Flux (MPFA) and Stress (MPSA) Finite Volume Methods for Thermo-Poroelasticity

Authors: Jan Martin Nordbotten, Eirik Keilegavlen

Abstract: We give a unified introduction to the MPFA- and MPSA-type finite volume methods for Darcy flow and poro-elasticity, applicable to general polyhedral grids. This leads to a more systematic perspective of these methods than has been exposed in previous texts, and we therefore refer to this discretization family as the MPxA methods. We apply this MPxA framework to also define a consistent finite-volu… ▽ More We give a unified introduction to the MPFA- and MPSA-type finite volume methods for Darcy flow and poro-elasticity, applicable to general polyhedral grids. This leads to a more systematic perspective of these methods than has been exposed in previous texts, and we therefore refer to this discretization family as the MPxA methods. We apply this MPxA framework to also define a consistent finite-volume discretization of thermo-poro-elasticity. In order to make the exposition accessible to a wide audience, we avoid much of the technical notation which is used in the research literature, and compensate for this by an expanded summary and literature review of the main properties of the MPxA methods. We close the chapter by a section containing applications to problems with complex geometries and non-linear physics. △ Less

Submitted 7 January, 2020; originally announced January 2020.

PorePy: An Open-Source Software for Simulation of Multiphysics Processes in Fractured Porous Media

Authors: Eirik Keilegavlen, Runar Berge, Alessio Fumagalli, Michele Starnoni, Ivar Stefansson, Jhabriel Varela, Inga Berre

Abstract: Development of models and dedicated numerical methods for dynamics in fractured rocks is an active research field, with research moving towards increasingly advanced process couplings and complex fracture networks. The inclusion of coupled processes in simulation models is challenged by the high aspect ratio of the fractures, the complex geometry of fracture networks and the crucial impact of proc… ▽ More Development of models and dedicated numerical methods for dynamics in fractured rocks is an active research field, with research moving towards increasingly advanced process couplings and complex fracture networks. The inclusion of coupled processes in simulation models is challenged by the high aspect ratio of the fractures, the complex geometry of fracture networks and the crucial impact of processes that completely change characteristics on the fracture-rock interface. This paper provides a general discussion of design principles for introducing fractures in simulators, and defines a framework for integrated modeling, discretization and computer implementation. The framework is implemented in the simulation software PorePy, which can serve as a flexible prototy** tool or multiphysics problems in fractured rocks. Based on a representation of the fractures and their intersections as lower-dimensional objects, we discuss data structures for mixed-dimensional meshes, formulation of multiphysics problems and discretizations that utilize existing software. We further present the implementation of these concepts in the PorePy open-source software tool, which is aimed at coupled simulation of flow and transport in three-dimensional fractured reservoirs as well as deformation of fractures and the reservoir in general. We present validation by benchmarks for flow, poroelasticity and fracture deformation in fractured porous media. The flexibility of the framework is then illustrated by simulations of fully coupled flow and transport and of injection driven deformation of fractures. All results reported herein can be reproduced by openly available simulation scripts. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Robust linear domain decomposition schemes for reduced non-linear fracture flow models

Authors: Elyes Ahmed, Alessio Fumagalli, Ana Budiša, Eirik Keilegavlen, Jan Martin Nordbotten, Florin Adrian Radu

Abstract: In this work, we consider compressible single-phase flow problems in a porous media containing a fracture. In the latter, a non-linear pressure-velocity relation is prescribed. Using a non-overlap** domain decomposition procedure, we reformulate the global problem into a non-linear interface problem. We then introduce two new algorithms that are able to efficiently handle the non-linearity and t… ▽ More In this work, we consider compressible single-phase flow problems in a porous media containing a fracture. In the latter, a non-linear pressure-velocity relation is prescribed. Using a non-overlap** domain decomposition procedure, we reformulate the global problem into a non-linear interface problem. We then introduce two new algorithms that are able to efficiently handle the non-linearity and the coupling between the fracture and the matrix, both based on linearization by the so-called L-scheme. The first algorithm, named MoLDD, uses the L-scheme to resolve the non-linearity, requiring at each iteration to solve the dimensional coupling via a domain decomposition approach. The second algorithm, called ItLDD, uses a sequential approach in which the dimensional coupling is part of the linearization iterations. For both algorithms, the computations are reduced only to the fracture by pre-computing, in an offline phase, a multiscale flux basis (the linear Robin-to-Neumann co-dimensional map), that represent the flux exchange between the fracture and the matrix. We present extensive theoretical findings and in particular, the stability and the convergence of both schemes are obtained, where user given parameters are optimized to minimise the number of iterations. Examples on two important fracture models are computed with the library PorePy and agree with the developed theory. △ Less

Submitted 1 October, 2020; v1 submitted 13 June, 2019; originally announced June 2019.

A combined finite element-finite volume framework for phase-field fracture

Authors: Juan Michael Sargado, Eirik Keilegavlen, Inga Berre, Jan Martin Nordbotten

Abstract: Numerical simulations of brittle fracture using phase-field approaches often employ a discrete approximation framework that applies the same order of interpolation for the displacement and phase-field variables. Most common is to use linear finite elements to discretize the linear momentum and phase-field equations. However the use of $P_1$ Lagrange shape functions to model the phase-field is not… ▽ More Numerical simulations of brittle fracture using phase-field approaches often employ a discrete approximation framework that applies the same order of interpolation for the displacement and phase-field variables. Most common is to use linear finite elements to discretize the linear momentum and phase-field equations. However the use of $P_1$ Lagrange shape functions to model the phase-field is not optimal, since the latter develops cusps for fully developed cracks that in turn occur at locations correspoding to Gauss points of the associated FE model for the mechanics. Such feature is challenging to reproduce accurately with low order elements, and consequently element sizes must be made very small relative to the phase-field regularization parameter in order to achieve convergence of results with respect to the mesh. In this paper, we combine the standard $P_1$ FE discretization of stress equilibrium with a cell-centered finite volume approximation of the phase-field evolution equation based on the two-point flux approximation that is constructed on the same simplex mesh. Compared to a pure FE formulation utilizing linear elements, the proposed framework results in looser restrictions on mesh refinement with respect to the phase-field length scale. Furthermore, initialization of the history field is straightforward and accomplished through a local procedure. The ability to employ a coarser mesh relative to the traditional implementation is shown for several numerical examples, demonstrating savings in computational cost on the order of 50 to 80 percent for the studied cases. △ Less

Submitted 28 April, 2019; originally announced April 2019.

Finite volume discretization for poroelastic media with fractures modeled by contact mechanics

Authors: Runar L. Berge, Inga Berre, Eirik Keilegavlen, Jan M. Nordbotten, Barbara Wohlmuth

Abstract: A fractured poroelastic body is considered where the opening of the fractures is governed by a nonpenetration law while slip is described by a Coulomb-type friction law. This physical model results in a nonlinear variational inequality problem. The variational inequality is rewritten as a complimentary function, and a semismooth Newton method is used to solve the system of equations. For the discr… ▽ More A fractured poroelastic body is considered where the opening of the fractures is governed by a nonpenetration law while slip is described by a Coulomb-type friction law. This physical model results in a nonlinear variational inequality problem. The variational inequality is rewritten as a complimentary function, and a semismooth Newton method is used to solve the system of equations. For the discretization, we use a hybrid scheme where the displacements are given in terms of degrees of freedom per element, and an additional Lagrange multiplier representing the traction is added on the fracture faces. The novelty of our method comes from combining the Lagrange multiplier from the hybrid scheme with a finite volume discretization of the poroelastic Biot equation, which allows us to directly impose the inequality constraints on each subface. The convergence of the method is studied for several challenging geometries in 2d and 3d, showing that the convergence rates of the finite volume scheme do not deteriorate when it is coupled to the Lagrange multipliers. Our method is especially attractive for the poroelastic problem because it allows for a straightforward coupling between the matrix deformation, contact conditions, and fluid pressure. △ Less

Submitted 23 August, 2019; v1 submitted 26 April, 2019; originally announced April 2019.

Comments: Preprint

Call for participation: Verification benchmarks for single-phase flow in three-dimensional fractured porous media

Authors: Inga Berre, Wietse Boon, Bernd Flemisch, Alessio Fumagalli, Dennis Gläser, Eirik Keilegavlen, Anna Scotti, Ivar Stefansson, Alexandru Tatomir

Abstract: This call for participation proposes four benchmark tests to verify and compare numerical schemes to solve single-phase flow in fractured porous media. With this, the two-dimensional suite of benchmark tests presented by Flemisch et al. 2018 is extended to include three-dimensional problems. Moreover, transport simulations are included as a means to compare discretization methods for flow. With th… ▽ More This call for participation proposes four benchmark tests to verify and compare numerical schemes to solve single-phase flow in fractured porous media. With this, the two-dimensional suite of benchmark tests presented by Flemisch et al. 2018 is extended to include three-dimensional problems. Moreover, transport simulations are included as a means to compare discretization methods for flow. With this publication, we invite researchers to contribute to the study by providing results to the test cases based on their applied discretization methods. △ Less

Submitted 18 September, 2018; originally announced September 2018.

Conforming, non-conforming and non-matching discretization couplings in discrete fracture network simulations

Authors: Alessio Fumagalli, Eirik Keilegavlen, Stefano Scialò

Abstract: Simulations of fluid flow in naturally fractured rocks have implications for several subsurface applications, including energy storage and extraction, and waste storage. We are interested in flow in discrete fracture networks, which explicitly represent flow in fracture surfaces, but ignore the impact of the surrounding host rock. Fracture networks, generated from observations or stochastic simula… ▽ More Simulations of fluid flow in naturally fractured rocks have implications for several subsurface applications, including energy storage and extraction, and waste storage. We are interested in flow in discrete fracture networks, which explicitly represent flow in fracture surfaces, but ignore the impact of the surrounding host rock. Fracture networks, generated from observations or stochastic simulations, will contain intersections of arbitrary length, and intersection lines can further cross, forming a highly complex geometry. As the flow exchange between fractures, thus in the network, takes place in these intersections, an adequate representation of the geometry is critical for simulation accuracy. In practice, the intersection dynamics must be handled by a combination of the simulation grid, which may or may not resolve the intersection lines, and the numerical methods applied on the grid. In this work, we review different classes of numerical approaches proposed in recent years, covering both methods that conform to the grid, and non-matching cases. Specific methods considered herein include finite element, mixed and virtual finite elements and control volume methods. We expose our methods to an extensive set of test cases, ranging from artificial geometries designed to test difficult configurations, to a network extruded from a real fracture outcrop. The main outcome is guidances for choice of simulation models and numerical discretization with a trade off on the computational cost and solution accuracy. △ Less

Submitted 6 March, 2018; v1 submitted 5 March, 2018; originally announced March 2018.

Unified approach to discretization of flow in fractured porous media

Authors: Jan M. Nordbotten, Wietse M. Boon, Alessio Fumagalli, Eirik Keilegavlen

Abstract: In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid flow equations in the porous medium and in the fractures, and as such it represents a unified approach to integrated fractured geometries into any existing discre… ▽ More In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid flow equations in the porous medium and in the fractures, and as such it represents a unified approach to integrated fractured geometries into any existing discretization framework. In particular, several existing discretization approaches for fractured porous media can be seen as special instances of the approach proposed herein. We provide an abstract stability theory for our approach, which provides explicit guidance into the grids used to discretize the fractures and the porous medium, as dependent on discretization methods chosen for the respective domains. The theoretical results are sustained by numerical examples, wherein we utilize our framework to simulate flow in 2D and 3D fractured media using control volume methods (both two-point and multi-point flux), Lagrangian finite element methods, mixed finite element methods, and virtual element methods. As expected, regardless of the ambient methods chosen, our approach leads to stable and convergent discretizations for the fractured problems considered, within the limits of the discretization schemes. △ Less

Submitted 9 August, 2018; v1 submitted 16 February, 2018; originally announced February 2018.

Hybrid-Dimensional Finite Volume Discretizations for Fractured Porous Media

Authors: Ivar Stefansson, Inga Berre, Eirik Keilegavlen

Abstract: Over the last decade, finite volume discretizations for flow in porous media have been extended to handle situations where fractures dominate the flow. These discretizations have successfully been combined with the discrete fracture-matrix models to yield mass conservative methods capable of explicitly incorporating the impact of fractures and their geometry. When combined with a hybrid-dimensiona… ▽ More Over the last decade, finite volume discretizations for flow in porous media have been extended to handle situations where fractures dominate the flow. These discretizations have successfully been combined with the discrete fracture-matrix models to yield mass conservative methods capable of explicitly incorporating the impact of fractures and their geometry. When combined with a hybrid-dimensional formulation, two central concerns are the restrictions arising from small cell sizes at fracture intersections and the coupling between fractures and matrix. Focusing on these aspects, we demonstrate how finite volume methods effectively can be extended to handle fractures, providing generalizations of previous work. We address the finite volume methods applying a general hierarchical formulation, facilitating implementation with extensive code reuse and providing a natural framework for coupling of different subdomains. Furthermore, we demonstrate how a Schur complement technique may be used to obtain a robust and versatile method for fracture intersection cell elimination. We investigate the accuracy of the proposed elimination method through a series of numerical simulations in 3D and 2D. The simulations, performed on fractured domains containing permeability heterogeneity and anisotropy, also demonstrate the flexibility of the hierarchical framework. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Implementation of mixed-dimensional models for flow in fractured porous media

Authors: Eirik Keilegavlen, Alessio Fumagalli, Runar Berge, Ivar Stefansson

Abstract: Models that involve coupled dynamics in a mixed-dimensional geometry are of increasing interest in several applications. Here, we describe the development of a simulation model for flow in fractured porous media, where the fractures and their intersections form a hierarchy of interacting subdomains. We discuss the implementation of a simulation framework, with an emphasis on reuse of existing disc… ▽ More Models that involve coupled dynamics in a mixed-dimensional geometry are of increasing interest in several applications. Here, we describe the development of a simulation model for flow in fractured porous media, where the fractures and their intersections form a hierarchy of interacting subdomains. We discuss the implementation of a simulation framework, with an emphasis on reuse of existing discretization tools for mono-dimensional problems. The key ingredients are the representation of the mixed-dimensional geometry as a graph, which allows for convenient discretization and data storage, and a non-intrusive coupling of dimensions via boundary conditions and source terms. This approach is applicable for a wide class of mixed-dimensional problems. We show simulation results for a flow problem in a three-dimensional fracture geometry, applying both finite volume and virtual finite element discretizations. △ Less

Submitted 20 December, 2017; originally announced December 2017.

PorePy: An Open-Source Simulation Tool for Flow and Transport in Deformable Fractured Rocks

Authors: Eirik Keilegavlen, Alessio Fumagalli, Runar Berge, Ivar Stefansson, Inga Berre

Abstract: Fractures are ubiquitous in the subsurface and strongly affect flow and deformation. The physical shape of the fractures, they are long and thin objects, puts strong limitations on how the effect of this dynamics can be incorporated into standard reservoir simulation tools. This paper reports the development of an open-source software framework, termed PorePy, which is aimed at simulation of flow… ▽ More Fractures are ubiquitous in the subsurface and strongly affect flow and deformation. The physical shape of the fractures, they are long and thin objects, puts strong limitations on how the effect of this dynamics can be incorporated into standard reservoir simulation tools. This paper reports the development of an open-source software framework, termed PorePy, which is aimed at simulation of flow and transport in three-dimensional fractured reservoirs, as well as deformation of the reservoir due to shearing along fracture and fault planes. Starting from a description of fractures as polygons embedded in a 3D domain, PorePy provides semi-automatic gridding to construct a discrete-fracture-matrix model, which forms the basis for subsequent simulations. PorePy allows for flow and transport in all lower-dimensional objects, including planes (2D) representing fractures, and lines (1D) and points (0D), representing fracture intersections. Interaction between processes in neighboring domains of different dimension is implemented as a sequence of couplings of objects one dimension apart. This readily allows for handling of complex fracture geometries compared to capabilities of existing software. In addition to flow and transport, PorePy provides models for rock mechanics, poro-elasticity and coupling with fracture deformation models. The software is fully open, and can serve as a framework for transparency and reproducibility of simulations. We describe the design principles of PorePy from a user perspective, with focus on possibilities within gridding, covered physical processes and available discretizations. The power of the framework is illustrated with two sets of simulations; involving respectively coupled flow and transport in a fractured porous medium, and low-pressure stimulation of a geothermal reservoir. △ Less

Submitted 21 December, 2017; v1 submitted 1 December, 2017; originally announced December 2017.

Dual Virtual Element Methods for Discrete Fracture Matrix Models

Authors: Alessio Fumagalli, Eirik Keilegavlen

Abstract: The accurate description of fluid flow and transport in fractured porous media is of paramount importance to capture the macroscopic behaviour of an oil reservoir, a geothermal system, or a CO2 sequestration site, to name few applications. The construction of accurate simulation model for flow in fractures is challenging due to the high ratios between a fracture's length and width, which makes mod… ▽ More The accurate description of fluid flow and transport in fractured porous media is of paramount importance to capture the macroscopic behaviour of an oil reservoir, a geothermal system, or a CO2 sequestration site, to name few applications. The construction of accurate simulation model for flow in fractures is challenging due to the high ratios between a fracture's length and width, which makes modeling by lower-dimensional manifolds a natural option. In this paper we present a mixed-dimensional Darcy problem able to describe pressure and Darcy velocity in all the dimensions, i.e. in the rock matrix, in the fractures, and in their intersections. Moreover, we present a mixed-dimensional transport problem which, given the Darcy velocity, describes coupled advection and diffusion of a passive scalar into the fractured porous media. The approach can handle both conducting and blocking fractures. Our computational grids are created by coarsening of simplex tessellations that conform to the fractures surfaces. An accurate choice of the discrete approximation of the previous model, by virtual finite element and finite volume, allows us to simulate complex problem with a good balance in term of accuracy and computational cost. We illustrate the performance of our method by comparing to benchmark studies for two-dimensional fractured porous media, as well as a complex three-dimensional fracture geometry. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Three-Dimensional Numerical Modeling of Shear Stimulation of Naturally Fractured Reservoirs

Authors: Eren Ucar, Inga Berre, Eirik Keilegavlen

Abstract: Shear dilation based hydraulic stimulations enable exploitation of geothermal energy from reservoirs with inadequate initial permeability. While contributing to enhancing the reservoir's permeability, hydraulic stimulation processes may lead to undesired seismic activity. Here, we present a three dimensional numerical model aiming to increase understanding of this mechanism and its consequences. T… ▽ More Shear dilation based hydraulic stimulations enable exploitation of geothermal energy from reservoirs with inadequate initial permeability. While contributing to enhancing the reservoir's permeability, hydraulic stimulation processes may lead to undesired seismic activity. Here, we present a three dimensional numerical model aiming to increase understanding of this mechanism and its consequences. The fractured reservoir is modeled as a network of explicitly represented large scale fractures immersed in a permeable rock matrix. The numerical formulation is constructed by coupling three physical processes: fluid flow, fracture deformation, and rock matrix deformation. For flow simulations, the discrete fracture matrix model is used, which allows the fluid transport from high permeable conductive fractures to the rock matrix and vice versa. The mechanical behavior of the fractures is modeled using a hyperbolic model with reversible and irreversible deformations. Linear elasticity is assumed for the mechanical deformation and stress alteration of the rock matrix. Fractures are modeled as lower dimensional surfaces embodied in the domain, subjected to specific governing equations for their deformation along the tangential and normal directions. Both the fluid flow and momentum balance equations are approximated by finite volume discretizations. The new numerical model is demonstrated considering a three dimensional fractured formation with a network of 20 explicitly represented fractures. The effects of fluid exchange between fractures and rock matrix on the permeability evolution and the generated seismicity are examined for test cases resembling realistic reservoir conditions. △ Less

Submitted 17 December, 2017; v1 submitted 6 September, 2017; originally announced September 2017.

High-accuracy phase-field models for brittle fracture based on a new family of degradation functions

Authors: Juan Michael Sargado, Eirik Keilegavlen, Inga Berre, Jan Martin Nordbotten

Abstract: Phase-field approaches to fracture based on energy minimization principles have been rapidly gaining popularity in recent years, and are particularly well-suited for simulating crack initiation and growth in complex fracture networks. In the phase-field framework, the surface energy associated with crack formation is calculated by evaluating a functional defined in terms of a scalar order paramete… ▽ More Phase-field approaches to fracture based on energy minimization principles have been rapidly gaining popularity in recent years, and are particularly well-suited for simulating crack initiation and growth in complex fracture networks. In the phase-field framework, the surface energy associated with crack formation is calculated by evaluating a functional defined in terms of a scalar order parameter and its gradients, which in turn describe the fractures in a diffuse sense following a prescribed regularization length scale. Imposing stationarity of the total energy leads to a coupled system of partial differential equations, one enforcing stress equilibrium and another governing phase-field evolution. The two equations are coupled through an energy degradation function that models the loss of stiffness in the bulk material as it undergoes damage. In the present work, we introduce a new parametric family of degradation functions aimed at increasing the accuracy of phase-field models in predicting critical loads associated with crack nucleation as well as the propagation of existing fractures. An additional goal is the preservation of linear elastic response in the bulk material prior to fracture. Through the analysis of several numerical examples, we demonstrate the superiority of the proposed family of functions to the classical quadratic degradation function that is used most often in the literature. △ Less

Submitted 11 May, 2017; originally announced May 2017.

Comments: 33 pages, 30 figures

Post-injection normal closure of fractures as a mechanism for induced seismicity

Authors: Eren Ucar, Inga Berre, Eirik Keilegavlen

Abstract: Understanding the controlling mechanisms underlying injection-induced seismicity is important for optimizing reservoir productivity and addressing seismicity-related concerns related to hydraulic stimulation in Enhanced Geothermal Systems. Hydraulic stimulation enhances permeability through elevated pressures, which cause normal deformations, and the shear slip of pre-existing fractures. Previous… ▽ More Understanding the controlling mechanisms underlying injection-induced seismicity is important for optimizing reservoir productivity and addressing seismicity-related concerns related to hydraulic stimulation in Enhanced Geothermal Systems. Hydraulic stimulation enhances permeability through elevated pressures, which cause normal deformations, and the shear slip of pre-existing fractures. Previous experiments indicate that fracture deformation in the normal direction reverses as the pressure decreases, e.g., at the end of stimulation. We hypothesize that this normal closure of fractures enhances pressure propagation away from the injection region and significantly increases the potential for post-injection seismicity. To test this hypothesis, hydraulic stimulation is modeled by numerically coupling fracture deformation, pressure diffusion and stress alterations for a synthetic geothermal reservoir in which the flow and mechanics are strongly affected by a complex three-dimensional fracture network. The role of the normal closure of fractures is verified by comparing simulations conducted with and without the normal closure effect. △ Less

Submitted 23 May, 2017; v1 submitted 8 May, 2017; originally announced May 2017.

A Finite-Volume Discretization for Deformation of Fractured Media

Authors: Eren Ucar, Eirik Keilegavlen, Inga Berre, Jan Martin Nordbotten

Abstract: Simulating the deformation of fractured media requires the coupling of different models for the deformation of fractures and the formation surrounding them. We consider a cell-centered finite-volume approach, termed the multipoint stress approximation (MPSA) method, which is developed in order to discretize coupled flow and mechanical deformation in the subsurface. Within the MPSA framework, we co… ▽ More Simulating the deformation of fractured media requires the coupling of different models for the deformation of fractures and the formation surrounding them. We consider a cell-centered finite-volume approach, termed the multipoint stress approximation (MPSA) method, which is developed in order to discretize coupled flow and mechanical deformation in the subsurface. Within the MPSA framework, we consider fractures as co-dimension one inclusions in the domain, with the fracture surfaces represented as line pairs in 2D (faces in 3D) that displace relative to each other. Fracture deformation is coupled to that of the surrounding domain through internal boundary conditions. This approach is natural within the finite-volume framework, where tractions are defined on surfaces of the grid. The MPSA method is capable of modeling deformation considering open and closed fractures with complex and nonlinear relationships governing the displacements and tractions at the fracture surfaces. We validate our proposed approach using both problems for which analytical solutions are available and more complex benchmark problems, including comparison with a finite-element discretization. △ Less

Submitted 20 March, 2018; v1 submitted 20 December, 2016; originally announced December 2016.

Dual virtual element method for discrete fractures networks

Authors: Alessio Fumagalli, Eirik Keilegavlen

Abstract: Discrete fracture networks is a key ingredient in the simulation of physical processes which involve fluid flow in the underground, when the surrounding rock matrix is considered impervious. In this paper we present two different models to compute the pressure field and Darcy velocity in the system. The first allows a normal flow out of a fracture at the intersections, while the second grants also… ▽ More Discrete fracture networks is a key ingredient in the simulation of physical processes which involve fluid flow in the underground, when the surrounding rock matrix is considered impervious. In this paper we present two different models to compute the pressure field and Darcy velocity in the system. The first allows a normal flow out of a fracture at the intersections, while the second grants also a tangential flow along the intersections. For the numerical discretization, we use the mixed virtual finite element method as it is known to handle grid elements of, almost, any arbitrary shape. The flexibility of the discretization allows us to loosen the requirements on grid construction, and thus significantly simplify the flow discretization compared to traditional discrete fracture network models. A coarsening algorithm, from the algebraic multigrid literature, is also considered to further speed up the computation. The performance of the method is validated by numerical experiments. △ Less

Submitted 16 August, 2017; v1 submitted 10 October, 2016; originally announced October 2016.

Finite volume methods for elasticity with weak symmetry

Authors: Eirik Keilegavlen, Jan Martin Nordbotten

Abstract: We introduce a new cell-centered finite volume discretization for elasticity with weakly enforced symmetry of the stress tensor. The method is motivated by the need for robust discretization methods for deformation and flow in porous media, and falls in the category of multi-point stress approximations (MPSA). By enforcing symmetry weakly, the resulting method has additional flexibility beyond pre… ▽ More We introduce a new cell-centered finite volume discretization for elasticity with weakly enforced symmetry of the stress tensor. The method is motivated by the need for robust discretization methods for deformation and flow in porous media, and falls in the category of multi-point stress approximations (MPSA). By enforcing symmetry weakly, the resulting method has additional flexibility beyond previous MPSA methods. This allows for a construction of a method which is applicable to all grid types, and in particular the method amends a crucial shortcoming in previous MPSA methods for simplex grids. By formulating the method as a discrete variational problem, we prove convergence of the new method for a wide range of problems, with conditions that can be verified at the time of discretization. We present the first set of comprehensive numerical tests for the MPSA methods in three dimensions, covering Cartesian and simplex grids, with both heterogeneous and nearly incompressible media. The tests show that the new method consistently is second order convergent in displacement, despite being lowest order, with a rate that mostly is between 1 and 2 for stresses. The results further show that the new method is more robust and computationally cheaper than previous MPSA methods. △ Less

Submitted 3 December, 2015; originally announced December 2015.