-
Adaptive resolution of fine scales in modes of microstructured optical fibers
Authors:
Jay Gopalakrishnan,
Jacob Grosek,
Gabriel Pinochet-Soto,
Pieter VandenBerge
Abstract:
An adaptive algorithm for computing eigenmodes and propagation constants of optical fibers is proposed. The algorithm is built using a dual-weighted residual error estimator. The residuals are based on the eigensystem for leaky hybrid modes obtained from Maxwell equations truncated to a finite domain after a transformation by a perfectly matched layer. The adaptive algorithm is then applied to com…
▽ More
An adaptive algorithm for computing eigenmodes and propagation constants of optical fibers is proposed. The algorithm is built using a dual-weighted residual error estimator. The residuals are based on the eigensystem for leaky hybrid modes obtained from Maxwell equations truncated to a finite domain after a transformation by a perfectly matched layer. The adaptive algorithm is then applied to compute practically interesting modes for multiple fiber microstructures. Emerging microstructured optical fibers are characterized by complex geometrical features in their transverse cross-section. Their leaky modes, useful for confining and propagating light in their cores, often exhibit fine scale features. The adaptive algorithm automatically captures these features without any expert input. The results also show that confinement losses of these modes are captured accurately on the adaptively found meshes.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Sensitivity of Confinement Losses in Optical Fibers to Modeling Approach
Authors:
Pieter Vandenberge,
Jay Gopalakrishnan,
Jacob Grosek
Abstract:
A prime objective of modeling optical fibers is capturing mode confinement losses correctly. This paper demonstrates that specific modeling choices, especially regarding the outer fiber cladding regions and the placement of the computational boundary, have significant impacts on the calculated mode losses. Our results illustrate that one can obtain disparate mode confinement loss profiles for the…
▽ More
A prime objective of modeling optical fibers is capturing mode confinement losses correctly. This paper demonstrates that specific modeling choices, especially regarding the outer fiber cladding regions and the placement of the computational boundary, have significant impacts on the calculated mode losses. Our results illustrate that one can obtain disparate mode confinement loss profiles for the same optical fiber design simply by moving the boundary to a new material region. We conclude with new recommendations for how to better model these losses.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Model and computational advancements to full vectorial Maxwell model for studying fiber amplifiers
Authors:
Stefan Henneking,
Jacob Grosek,
Leszek Demkowicz
Abstract:
We present both modeling and computational advancements to a unique three-dimensional discontinuous Petrov-Galerkin finite element model for the simulation of laser amplification in a fiber amplifier. Our model is based on the time-harmonic Maxwell equations, and it incorporates both amplification via an active dopant and thermal effects via coupling with the heat equation. As a full vectorial fin…
▽ More
We present both modeling and computational advancements to a unique three-dimensional discontinuous Petrov-Galerkin finite element model for the simulation of laser amplification in a fiber amplifier. Our model is based on the time-harmonic Maxwell equations, and it incorporates both amplification via an active dopant and thermal effects via coupling with the heat equation. As a full vectorial finite element simulation, this model distinguishes itself from other fiber amplifier models that are typically posed as an initial value problem and make significantly more approximations. Our model supports co-, counter-, and bi-directional pum** configurations, as well as inhomogeneous and anisotropic material properties. The longer-term goal of this modeling effort is to study nonlinear phenomena that prohibit achieving unprecedented power levels in fiber amplifiers, along with validating typical approximations used in lower-fidelity models. The high-fidelity simulation comes at the cost of a high-order finite element discretization with many degrees of freedom per wavelength. This is necessary to counter the effect of numerical pollution due to the high-frequency nature of the wave simulation. To make the computation more feasible, we have developed a novel longitudinal model rescaling, using artificial material parameters with the goal of preserving certain quantities of interest. Our numerical tests demonstrate the applicability and utility of this scaled model in the simulation of an ytterbium-doped, step-index fiber amplifier that experiences laser amplification and heating. We present numerical results for the nonlinear coupled Maxwell/heat model with up to 240 wavelengths.
△ Less
Submitted 13 October, 2020; v1 submitted 2 December, 2019;
originally announced December 2019.
-
Simulation of Optical Fiber Amplifier Gain Using Equivalent Short Fibers
Authors:
Dow Drake,
Jay Gopalakrishnan,
Tathagata Goswami,
Jacob Grosek
Abstract:
Electromagnetic wave propagation in optical fiber amplifiers obeys Maxwell equations. Using coupled mode theory, the full Maxwell system within an optical fiber amplifier is reduced to a simpler model. The simpler model is made more efficient through a new scale model, referred to as an equivalent short fiber, which captures some of the essential characteristics of a longer fiber. The equivalent s…
▽ More
Electromagnetic wave propagation in optical fiber amplifiers obeys Maxwell equations. Using coupled mode theory, the full Maxwell system within an optical fiber amplifier is reduced to a simpler model. The simpler model is made more efficient through a new scale model, referred to as an equivalent short fiber, which captures some of the essential characteristics of a longer fiber. The equivalent short fiber can be viewed as a fiber made using artificial (unphysical) material properties that in some sense compensates for its reduced length. The computations can be accelerated by a factor approximately equal to the ratio of the original length to the reduced length of the equivalent fiber. Computations using models of two commercially available fibers -- one doped with ytterbium, and the other with thulium -- show the practical utility of the concept. Extensive numerical studies are conducted to assess when the equivalent short fiber model is useful and when it is not.
△ Less
Submitted 4 May, 2019;
originally announced May 2019.
-
A 3D DPG Maxwell Approach to Nonlinear Raman Gain in Fiber Laser Amplifiers
Authors:
S. Nagaraj,
J. Grosek,
S. Petrides,
L. Demkowicz,
J. Mora
Abstract:
We propose a three dimensional Discontinuous Petrov-Galerkin Maxwell approach for modeling Raman gain in fiber laser amplifiers. In contrast with popular beam propagation models, we are interested in a truly full vectorial approach. We apply the ultraweak DPG formulation, which is known to carry desirable properties for high-frequency wave propagation problems, to the coupled Maxwell signal/pump s…
▽ More
We propose a three dimensional Discontinuous Petrov-Galerkin Maxwell approach for modeling Raman gain in fiber laser amplifiers. In contrast with popular beam propagation models, we are interested in a truly full vectorial approach. We apply the ultraweak DPG formulation, which is known to carry desirable properties for high-frequency wave propagation problems, to the coupled Maxwell signal/pump system and use a nonlinear iterative scheme to account for the Raman gain. This paper also introduces a novel and practical full-vectorial formulation of the electric polarization term for Raman gain that emphasizes the fact that the computer modeler is only given a measured bulk Raman gain coefficient. Our results provide promising qualitative corroboration of the model and methodology used.
△ Less
Submitted 13 July, 2018; v1 submitted 30 May, 2018;
originally announced May 2018.