-
Portable, Massively Parallel Implementation of a Material Point Method for Compressible Flows
Authors:
Paolo Joseph Baioni,
Tommaso Benacchio,
Luigi Capone,
Carlo de Falco
Abstract:
The recent evolution of software and hardware technologies is leading to a renewed computational interest in Particle-In-Cell (PIC) methods such as the Material Point Method (MPM). Indeed, provided some critical aspects are properly handled, PIC methods can be cast in formulations suitable to the requirements of data locality and fine-grained parallelism of modern hardware accelerators as Graphics…
▽ More
The recent evolution of software and hardware technologies is leading to a renewed computational interest in Particle-In-Cell (PIC) methods such as the Material Point Method (MPM). Indeed, provided some critical aspects are properly handled, PIC methods can be cast in formulations suitable to the requirements of data locality and fine-grained parallelism of modern hardware accelerators as Graphics Processing Units (GPUs). Such a rapid and continuous technological development increases also the importance of generic and portable implementations. While continuum mechanics simulations have already shown the capabilities of MPM on a wide range of phenomena, the use of the method in compressible fluid dynamics is less frequent. In this paper we present a portable, highly parallel, GPU based MPM solver for compressible gas dynamics. The implementation aims to reach a good compromise between portability and efficiency and to give a first assessment of the potential of this approach in reproducing strongly compressible gas flows, also taking into account solid obstacles. The proposed model constitutes a first step towards the development of a monolithic MPM solver for Fluid-Structure Interaction (FSI) problems at all Mach numbers up to the supersonic regime.
△ Less
Submitted 2 July, 2024; v1 submitted 25 April, 2024;
originally announced April 2024.
-
Travelling waves in a minimal go-or-grow model of cell invasion
Authors:
Carles Falcó,
Rebecca M. Crossley,
Ruth E. Baker
Abstract:
We consider a minimal go-or-grow model of cell invasion, whereby cells can either proliferate, following logistic growth, or move, via linear diffusion, and phenotypic switching between these two states is density-dependent. Formal analysis in the fast switching regime shows that the total cell density in the two-population go-or-grow model can be described in terms of a single reaction-diffusion…
▽ More
We consider a minimal go-or-grow model of cell invasion, whereby cells can either proliferate, following logistic growth, or move, via linear diffusion, and phenotypic switching between these two states is density-dependent. Formal analysis in the fast switching regime shows that the total cell density in the two-population go-or-grow model can be described in terms of a single reaction-diffusion equation with density-dependent diffusion and proliferation. Using the connection to single-population models, we study travelling wave solutions, showing that the wave speed in the go-or-grow model is always bounded by the wave speed corresponding to the well-known Fisher-KPP equation.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Competing effects in fourth-order aggregation-diffusion equations
Authors:
José Antonio Carrillo,
Antonio Esposito,
Carles Falcó,
Alejandro Fernández-Jiménez
Abstract:
We give sharp conditions for global in time existence of gradient flow solutions to a Cahn-Hilliard-type equation, with backwards second order degenerate diffusion, in any dimension and for general initial data. Our equation is the 2-Wasserstein gradient flow of a free energy with two competing effects: the Dirichlet energy and the power-law internal energy. Homogeneity of the functionals reveals…
▽ More
We give sharp conditions for global in time existence of gradient flow solutions to a Cahn-Hilliard-type equation, with backwards second order degenerate diffusion, in any dimension and for general initial data. Our equation is the 2-Wasserstein gradient flow of a free energy with two competing effects: the Dirichlet energy and the power-law internal energy. Homogeneity of the functionals reveals critical regimes that we analyse. Sharp conditions for global in time solutions, constructed via the minimising movement scheme, also known as JKO scheme, are obtained. Furthermore, we study a system of two Cahn-Hilliard-type equations exhibiting an analogous gradient flow structure.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Scalable Recovery-based Adaptation on Quadtree Meshes for Advection-Diffusion-Reaction Problems
Authors:
Pasquale Claudio Africa,
Simona Perotto,
Carlo de Falco
Abstract:
We propose a mesh adaptation procedure for Cartesian quadtree meshes, to discretize scalar advection-diffusion-reaction problems. The adaptation process is driven by a recovery-based a posteriori estimator for the $L^2(Ω)$-norm of the discretization error, based on suitable higher order approximations of both the solution and the associated gradient. In particular, a metric-based approach exploits…
▽ More
We propose a mesh adaptation procedure for Cartesian quadtree meshes, to discretize scalar advection-diffusion-reaction problems. The adaptation process is driven by a recovery-based a posteriori estimator for the $L^2(Ω)$-norm of the discretization error, based on suitable higher order approximations of both the solution and the associated gradient. In particular, a metric-based approach exploits the information furnished by the estimator to iteratively predict the new adapted mesh. The new mesh adaptation algorithm is successfully assessed on different configurations, and turns out to perform well also when dealing with discontinuities in the data as well as in the presence of internal layers not aligned with the Cartesian directions. A cross-comparison with a standard estimate--mark--refine approach and with other adaptive strategies available in the literature shows the remarkable accuracy and parallel scalability of the proposed approach.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
A local continuum model of cell-cell adhesion
Authors:
Carles Falcó,
Ruth E. Baker,
José A. Carrillo
Abstract:
Cell-cell adhesion is one the most fundamental mechanisms regulating collective cell migration during tissue development, homeostasis and repair, allowing cell populations to self-organize and eventually form and maintain complex tissue shapes. Cells interact with each other via the formation of protrusions or filopodia and they adhere to other cells through binding of cell surface proteins. The r…
▽ More
Cell-cell adhesion is one the most fundamental mechanisms regulating collective cell migration during tissue development, homeostasis and repair, allowing cell populations to self-organize and eventually form and maintain complex tissue shapes. Cells interact with each other via the formation of protrusions or filopodia and they adhere to other cells through binding of cell surface proteins. The resulting adhesive forces are then related to cell size and shape and, often, continuum models represent them by nonlocal attractive interactions. In this paper, we present a new continuum model of cell-cell adhesion which can be derived from a general nonlocal model in the limit of short-range interactions. This new model is local, resembling a system of thin-film type equations, with the various model parameters playing the role of surface tensions between different cell populations. Numerical simulations in one and two dimensions reveal that the local model maintains the diversity of cell sorting patterns observed both in experiments and in previously used nonlocal models. In addition, it also has the advantage of having explicit stationary solutions, which provides a direct link between the model parameters and the differential adhesion hypothesis.
△ Less
Submitted 15 November, 2022; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Bulk-Boundary eigenvalues for Bilaplacian problems
Authors:
Davide Buoso,
Carles Falcó,
María del Mar González,
Manuel Miranda
Abstract:
We initiate the study of a bulk-boundary eigenvalue problem for the Bilaplacian with a particular third order boundary condition that arises from the study of dynamical boundary conditions for the Cahn-Hilliard equation. First we consider continuity properties under parameter variation (in which the parameter also affects the domain of definition of the operator). Then we look at the ball and the…
▽ More
We initiate the study of a bulk-boundary eigenvalue problem for the Bilaplacian with a particular third order boundary condition that arises from the study of dynamical boundary conditions for the Cahn-Hilliard equation. First we consider continuity properties under parameter variation (in which the parameter also affects the domain of definition of the operator). Then we look at the ball and the annulus geometries (together with the punctured ball), obtaining the eigenvalues as solutions of a precise equation involving special functions. An interesting outcome of our analysis in the annulus case is the presence of a bifurcation from the zero eigenvalue depending on the size of the annulus.
△ Less
Submitted 9 June, 2022; v1 submitted 11 December, 2021;
originally announced December 2021.
-
IsoGeometric Approximations for Electromagnetic Problems in Axisymmetric Domains
Authors:
Abele Simona,
Luca Bonaventura,
Carlo de Falco,
Sebastian Schöps
Abstract:
We propose a numerical method for the solution of electromagnetic problems on axisymmetric domains, based on a combination of a spectral Fourier approximation in the azimuthal direction with an IsoGeometric Analysis (IGA) approach in the radial and axial directions. This combination allows to blend the flexibility and accuracy of IGA approaches with the advantages of a Fourier representation on ax…
▽ More
We propose a numerical method for the solution of electromagnetic problems on axisymmetric domains, based on a combination of a spectral Fourier approximation in the azimuthal direction with an IsoGeometric Analysis (IGA) approach in the radial and axial directions. This combination allows to blend the flexibility and accuracy of IGA approaches with the advantages of a Fourier representation on axisymmetric domains. It also allows to reduce significantly the computational cost by decoupling of the computations required for each Fourier mode. We prove that the discrete approximation spaces employed functional space constitute a closed and exact de Rham sequence. Numerical simulations of relevant benchmarks confirm the high order convergence and other computational advantages of the proposed method.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Isogeometric Mortar Coupling for Electromagnetic Problems
Authors:
Annalisa Buffa,
Jacopo Corno,
Carlo de Falco,
Sebastian Schöps,
Rafael Vázquez
Abstract:
This paper discusses and analyses two domain decomposition approaches for electromagnetic problems that allow the combination of domains discretised by either Nédélec-type polynomial finite elements or spline-based isogeometric analysis. The first approach is a new isogeometric mortar method and the second one is based on a modal basis for the Lagrange multiplier space, called state-space concaten…
▽ More
This paper discusses and analyses two domain decomposition approaches for electromagnetic problems that allow the combination of domains discretised by either Nédélec-type polynomial finite elements or spline-based isogeometric analysis. The first approach is a new isogeometric mortar method and the second one is based on a modal basis for the Lagrange multiplier space, called state-space concatenation in the engineering literature. Spectral correctness and in particular inf-sup stability of both approaches are analytically and numerically investigated. The new mortar method is shown to be unconditionally stable. Its construction of the discrete Lagrange multiplier space takes advantage of the high continuity of splines, and does not have an analogue for Nédélec finite elements. On the other hand, the approach with modal basis is easier to implement but relies on application knowledge to ensure stability and correctness.
△ Less
Submitted 27 December, 2018;
originally announced January 2019.
-
Recent Advances of Isogeometric Analysis in Computational Electromagnetics
Authors:
Zeger Bontinck,
Jacopo Corno,
Herbert De Gersem,
Stefan Kurz,
Andreas Pels,
Sebastian Schöps,
Felix Wolf,
Carlo de Falco,
Jürgen Dölz,
Rafael Vázquez,
Ulrich Römer
Abstract:
In this communication the advantages and drawbacks of the isogeometric analysis (IGA) are reviewed in the context of electromagnetic simulations. IGA extends the set of polynomial basis functions, commonly employed by the classical Finite Element Method (FEM). While identical to FEM with Nédélec's basis functions in the lowest order case, it is based on B-spline and Non-Uniform Rational B-spline b…
▽ More
In this communication the advantages and drawbacks of the isogeometric analysis (IGA) are reviewed in the context of electromagnetic simulations. IGA extends the set of polynomial basis functions, commonly employed by the classical Finite Element Method (FEM). While identical to FEM with Nédélec's basis functions in the lowest order case, it is based on B-spline and Non-Uniform Rational B-spline basis functions. The main benefit of this is the exact representation of the geometry in the language of computer aided design (CAD) tools. This simplifies the meshing as the computational mesh is implicitly created by the engineer using the CAD tool. The curl- and div-conforming spline function spaces are recapitulated and the available software is discussed. Finally, several non-academic benchmark examples in two and three dimensions are shown which are used in optimization and uncertainty quantification workflows.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
Isogeometric Simulation of Lorentz Detuning in Superconducting Accelerator Cavities
Authors:
Jacopo Corno,
Carlo de Falco,
Herbert De Gersem,
Sebastian Schöps
Abstract:
Cavities in linear accelerators suffer from eigenfrequency shifts due to mechanical deformation caused by the electromagnetic radiation pressure, a phenomenon known as Lorentz detuning. Estimating the frequency shift up to the needed accuracy by means of standard Finite Element Methods, is a complex task due to the non exact representation of the geometry and due to the necessity for mesh refineme…
▽ More
Cavities in linear accelerators suffer from eigenfrequency shifts due to mechanical deformation caused by the electromagnetic radiation pressure, a phenomenon known as Lorentz detuning. Estimating the frequency shift up to the needed accuracy by means of standard Finite Element Methods, is a complex task due to the non exact representation of the geometry and due to the necessity for mesh refinement when using low order basis functions. In this paper, we use Isogeometric Analysis for discretising both mechanical deformations and electromagnetic fields in a coupled multiphysics simulation approach. The combined high-order approximation of both leads to high accuracies at a substantially lower computational cost.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
A Multiscale Thermo-Fluid Computational Model for a Two-Phase Cooling System
Authors:
Riccardo Sacco,
Lucia Carichino,
Carlo de Falco,
Maurizio Verri,
Francesco Agostini,
Thomas Gradinger
Abstract:
In this paper, we describe a mathematical model and a numerical simulation method for the condenser component of a novel two-phase thermosyphon cooling system for power electronics applications. The condenser consists of a set of roll-bonded vertically mounted fins among which air flows by either natural or forced convection. In order to deepen the understanding of the mechanisms that determine th…
▽ More
In this paper, we describe a mathematical model and a numerical simulation method for the condenser component of a novel two-phase thermosyphon cooling system for power electronics applications. The condenser consists of a set of roll-bonded vertically mounted fins among which air flows by either natural or forced convection. In order to deepen the understanding of the mechanisms that determine the performance of the condenser and to facilitate the further optimization of its industrial design, a multiscale approach is developed to reduce as much as possible the complexity of the simulation code while maintaining reasonable predictive accuracy. To this end, heat diffusion in the fins and its convective transport in air are modeled as 2D processes while the flow of the two-phase coolant within the fins is modeled as a 1D network of pipes. For the numerical solution of the resulting equations, a Dual Mixed-Finite Volume scheme with Exponential Fitting stabilization is used for 2D heat diffusion and convection while a Primal Mixed Finite Element discretization method with upwind stabilization is used for the 1D coolant flow. The mathematical model and the numerical method are validated through extensive simulations of realistic device structures which prove to be in excellent agreement with available experimental data.
△ Less
Submitted 2 April, 2014;
originally announced April 2014.
-
Analytical and Numerical Study of Photocurrent Transients in Organic Polymer Solar Cells
Authors:
Carlo de Falco,
Riccardo Sacco,
Maurizio Verri
Abstract:
This article is an attempt to provide a self consistent picture, including existence analysis and numerical solution algorithms, of the mathematical problems arising from modeling photocurrent transients in Organic-polymer Solar Cells (OSCs). The mathematical model for OSCs consists of a system of nonlinear diffusion-reaction partial differential equations (PDEs) with electrostatic convection, cou…
▽ More
This article is an attempt to provide a self consistent picture, including existence analysis and numerical solution algorithms, of the mathematical problems arising from modeling photocurrent transients in Organic-polymer Solar Cells (OSCs). The mathematical model for OSCs consists of a system of nonlinear diffusion-reaction partial differential equations (PDEs) with electrostatic convection, coupled to a kinetic ordinary differential equation (ODE). We propose a suitable reformulation of the model that allows us to prove the existence of a solution in both stationary and transient conditions and to better highlight the role of exciton dynamics in determining the device turn-on time. For the numerical treatment of the problem, we carry out a temporal semi-discretization using an implicit adaptive method, and the resulting sequence of differential subproblems is linearized using the Newton-Raphson method with inexact evaluation of the Jacobian. Then, we use exponentially fitted finite elements for the spatial discretization, and we carry out a thorough validation of the computational model by extensively investigating the impact of the model parameters on photocurrent transient times.
△ Less
Submitted 27 June, 2012;
originally announced June 2012.
-
Multiscale Modeling and Simulation of Organic Solar Cells
Authors:
Carlo de Falco,
Matteo Porro,
Riccardo Sacco,
Maurizio Verri
Abstract:
In this article, we continue our mathematical study of organic solar cells (OSCs) and propose a two-scale (micro- and macro-scale) model of heterojunction OSCs with interface geometries characterized by an arbitrarily complex morphology. The microscale model consists of a system of partial and ordinary differential equations in an heterogeneous domain, that provides a full description of excitatio…
▽ More
In this article, we continue our mathematical study of organic solar cells (OSCs) and propose a two-scale (micro- and macro-scale) model of heterojunction OSCs with interface geometries characterized by an arbitrarily complex morphology. The microscale model consists of a system of partial and ordinary differential equations in an heterogeneous domain, that provides a full description of excitation/transport phenomena occurring in the bulk regions and dissociation/recombination processes occurring in a thin material slab across the interface. The macroscale model is obtained by a micro-to-macro scale transition that consists of averaging the mass balance equations in the normal direction across the interface thickness, giving rise to nonlinear transmission conditions that are parametrized by the interfacial width. These conditions account in a lumped manner for the volumetric dissociation/recombination phenomena occurring in the thin slab and depend locally on the electric field magnitude and orientation. Using the macroscale model in two spatial dimensions, device structures with complex interface morphologies, for which existing data are available, are numerically investigated showing that, if the electric field orientation relative to the interface is taken into due account, the device performance is determined not only by the total interface length but also by its shape.
△ Less
Submitted 28 June, 2012; v1 submitted 7 June, 2012;
originally announced June 2012.