-
Auxiliary Signal-Based Distance Protection in Inverter-Dominated Power Systems
Authors:
Josh A. Taylor,
Alejandro D. Domínguez-García
Abstract:
Power system protection schemes today rely on currents rising by several orders of magnitude when faults occur. In inverter-dominated power systems, a fault current might be just a few percent larger than normal, making fault detection more difficult. One solution is for the inverter to slightly perturb its output current and/or voltage, i.e., to inject an auxiliary signal, so as to make the syste…
▽ More
Power system protection schemes today rely on currents rising by several orders of magnitude when faults occur. In inverter-dominated power systems, a fault current might be just a few percent larger than normal, making fault detection more difficult. One solution is for the inverter to slightly perturb its output current and/or voltage, i.e., to inject an auxiliary signal, so as to make the system's behavior under faults easier to distinguish from normal. In this paper, we optimize auxiliary signals for fault detection with distance relays. We begin with a standard auxiliary signal design problem for generic static systems. We use duality to reformulate the problem as a bilinear program, which we solve using the convex-concave procedure. We implement the framework in an example based on distance protection, in which the auxiliary signal is negative sequence current.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
An Online Feedback Optimization Approach to Voltage Regulation in Inverter-Based Power Distribution Networks
Authors:
Alejandro D. Dominguez-Garcia,
Madi Zholbaryssov,
Temitope Amuda,
Olaoluwapo Ajala
Abstract:
We address the problem of controlling the reactive power setpoints of a set of distributed energy resources (DERs) in a power distribution network so as to mitigate the impact of variability in uncontrolled power injections associated with, e.g., renewable-based generation. We formulate the control design problem as a stochastic optimization problem, which we solve online using a modified version…
▽ More
We address the problem of controlling the reactive power setpoints of a set of distributed energy resources (DERs) in a power distribution network so as to mitigate the impact of variability in uncontrolled power injections associated with, e.g., renewable-based generation. We formulate the control design problem as a stochastic optimization problem, which we solve online using a modified version of a projected stochastic gradient descent (PSGD) algorithm. The proposed PSGD-based algorithm utilizes sensitivities of changes in bus voltage magnitudes to changes in DER reactive power setpoints; such sensitivities are learned online via a recursive least squares estimator (rLSE). To ensure proper operation of the rLSE, the sequence of incremental changes in DER reactive power setpoints needs to be persistently exciting, which is guaranteed by a mechanism built into the controller. We analyze the stability of the closed-loop system and showcase controller performance via numerical simulations on the IEEE 123-bus distribution test feeder.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Data-driven Voltage Regulation in Radial Power Distribution Systems
Authors:
Hanchen Xu,
Alejandro D. Domínguez-García,
Venugopal V. Veeravalli,
Peter W. Sauer
Abstract:
In this paper, we develop a data-driven voltage regulation framework for distributed energy resources (DERs) in a balanced radial power distribution system. The objective is to determine optimal DER power injections that minimize the voltage deviations from a desirable voltage range without knowing a complete power distribution system model a priori. The nonlinear relationship between the voltage…
▽ More
In this paper, we develop a data-driven voltage regulation framework for distributed energy resources (DERs) in a balanced radial power distribution system. The objective is to determine optimal DER power injections that minimize the voltage deviations from a desirable voltage range without knowing a complete power distribution system model a priori. The nonlinear relationship between the voltage magnitudes and the power injections in the power distribution system is approximated by a linear model, the parameters of which---referred to as the voltage sensitivities---can be computed directly using information on the topology and the line parameters. Assuming the knowledge of feasible topology configurations and distribution line resistance-to-reactance ratios, the true topology configuration and corresponding line parameters can be estimated effectively using a few sets of measurements on voltage magnitudes and power injections. Using the estimated voltage sensitivities, the optimal DER power injections can be readily determined by solving a convex optimization problem. The proposed framework is intrinsically adaptive to changes in system conditions such as unknown topology reconfiguration due to its data-driven nature. The effectiveness and efficiency of the proposed framework is validated via numerical simulations on the IEEE 123-bus distribution test feeder.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Optimal Tap Setting of Voltage Regulation Transformers Using Batch Reinforcement Learning
Authors:
Hanchen Xu,
Alejandro D. Domínguez-García,
Peter W. Sauer
Abstract:
In this paper, we address the problem of setting the tap positions of load tap changers (LTCs) for voltage regulation in radial power distribution systems under uncertain load dynamics. The objective is to find a policy to determine the tap positions that only uses measurements of voltage magnitudes and topology information so as to minimize the voltage deviation across the system. We formulate th…
▽ More
In this paper, we address the problem of setting the tap positions of load tap changers (LTCs) for voltage regulation in radial power distribution systems under uncertain load dynamics. The objective is to find a policy to determine the tap positions that only uses measurements of voltage magnitudes and topology information so as to minimize the voltage deviation across the system. We formulate this problem as a Markov decision process (MDP), and propose a batch reinforcement learning (RL) algorithm to solve it. By taking advantage of a linearized power flow model, we propose an effective algorithm to estimate the voltage magnitudes under different tap settings, which allows the RL algorithm to explore the state and action spaces freely offline without impacting the system operation. To circumvent the "curse of dimensionality" resulted from the large state and action spaces, we propose a sequential learning algorithm to learn an action-value function for each LTC, based on which the optimal tap positions can be directly determined. The effectiveness of the proposed algorithm is validated via numerical simulations on the IEEE 13-bus and 123-bus distribution test feeders.
△ Less
Submitted 13 February, 2019; v1 submitted 28 July, 2018;
originally announced July 2018.
-
Data-driven Coordination of Distributed Energy Resources for Active Power Provision
Authors:
Hanchen Xu,
Alejandro D. Domínguez-García,
Peter W. Sauer
Abstract:
In this paper, we propose a framework for coordinating distributed energy resources (DERs) connected to a power distribution system, the model of which is not completely known, so that they collectively provide a specified amount of active power to the bulk power system as quantified by the power exchange between both systems at the bus interconnecting them, while respecting distribution line capa…
▽ More
In this paper, we propose a framework for coordinating distributed energy resources (DERs) connected to a power distribution system, the model of which is not completely known, so that they collectively provide a specified amount of active power to the bulk power system as quantified by the power exchange between both systems at the bus interconnecting them, while respecting distribution line capacity limits. The proposed framework consists of (i) a linear time-varying input-output (IO) system model that represents the relation between the DER active power injections (inputs), and the total active power exchanged between the distribution and bulk power systems (output); (ii) an estimator that aims to estimate the IO model parameters, and (iii) a controller that determines the optimal DER active power injections so the power exchanged between both systems equals to the specified amount at a minimum generating cost. We formulate the estimation problem as a quadratic program with box constraints and solve it using the projected gradient descent algorithm. To resolve the potential issue of collinearity in the measurements used by the estimator, we introduce random perturbations in the DER active power injections during the estimation process. Using the estimated IO model, the optimal DER coordination problem to be solved by the controller can be formulated as a convex optimization problem, which can be solved easily. The effectiveness of the framework is validated via numerical simulations using the IEEE 123-bus distribution test feeder.
△ Less
Submitted 13 February, 2019; v1 submitted 30 March, 2018;
originally announced April 2018.
-
A Data-driven Voltage Control Framework for Power Distribution Systems
Authors:
Hanchen Xu,
Alejandro D. Domínguez-García,
Peter W. Sauer
Abstract:
In this paper, we address the problem of coordinating a set of distributed energy resources (DERs) to regulate voltage in power distribution systems to desired levels. To this end, we formulate the voltage control problem as an optimization problem, the objective of which is to determine the optimal DER power injections that minimize the voltage deviations from desirable voltage levels subject to…
▽ More
In this paper, we address the problem of coordinating a set of distributed energy resources (DERs) to regulate voltage in power distribution systems to desired levels. To this end, we formulate the voltage control problem as an optimization problem, the objective of which is to determine the optimal DER power injections that minimize the voltage deviations from desirable voltage levels subject to a set of constraints. The nonlinear relationship between the voltage magnitudes and the nodal power injections is approximated by a linear model, the parameters of which can be estimated in real-time efficiently using measurements. In particular, the parameter estimation requires much fewer data by exploiting the structural characteristics of the power distribution system. As such, the voltage control framework is intrinsically adaptive to parameter changes. Numerical studies on the IEEE 37-bus power distribution test feeder validated the effectiveness of the propose framework.
△ Less
Submitted 11 November, 2017;
originally announced November 2017.
-
Adaptive Coordination of Distributed Energy Resources in Lossy Power Distribution Systems
Authors:
Hanchen Xu,
Alejandro D. Domínguez-García,
Peter W. Sauer
Abstract:
This paper is concerned with the problem of coordinating a set of distributed energy resources (DERs) in a lossy power distribution system to provide frequency regulation services to a bulk power grid with the explicit consideration of system losses. To this end, we formulate the problem as an optimization problem, the objective of which is to minimize some cost function subject to a set of constr…
▽ More
This paper is concerned with the problem of coordinating a set of distributed energy resources (DERs) in a lossy power distribution system to provide frequency regulation services to a bulk power grid with the explicit consideration of system losses. To this end, we formulate the problem as an optimization problem, the objective of which is to minimize some cost function subject to a set of constraints. The formulation requires knowledge of incremental total system losses, which we approximate using the so-called loss factors (LFs) that explicitly capture the impacts of both active and reactive power injections on system losses. The LFs are estimated recursively using power injection measurements; thus, they are adaptive to various phenomena that impact the power system operation. Numerical simulation on a 33-bus distribution test feeder validated the effectiveness of the proposed framework.
△ Less
Submitted 27 February, 2018; v1 submitted 11 November, 2017;
originally announced November 2017.
-
Distributed Algorithms for Consensus and Coordination in the Presence of Packet-Drop** Communication Links - Part II: Coefficients of Ergodicity Analysis Approach
Authors:
Nitin H. Vaidya,
Christoforos N. Hadjicostis,
Alejandro D. Dominguez-Garcia
Abstract:
In this two-part paper, we consider multicomponent systems in which each component can iteratively exchange information with other components in its neighborhood in order to compute, in a distributed fashion, the average of the components' initial values or some other quantity of interest (i.e., some function of these initial values). In particular, we study an iterative algorithm for computing th…
▽ More
In this two-part paper, we consider multicomponent systems in which each component can iteratively exchange information with other components in its neighborhood in order to compute, in a distributed fashion, the average of the components' initial values or some other quantity of interest (i.e., some function of these initial values). In particular, we study an iterative algorithm for computing the average of the initial values of the nodes. In this algorithm, each component maintains two sets of variables that are updated via two identical linear iterations. The average of the initial values of the nodes can be asymptotically computed by each node as the ratio of two of the variables it maintains. In the first part of this paper, we show how the update rules for the two sets of variables can be enhanced so that the algorithm becomes tolerant to communication links that may drop packets, independently among them and independently between different transmission times. In this second part, by rewriting the collective dynamics of both iterations, we show that the resulting system is mathematically equivalent to a finite inhomogenous Markov chain whose transition matrix takes one of finitely many values at each step. Then, by using e a coefficients of ergodicity approach, a method commonly used for convergence analysis of Markov chains, we prove convergence of the robustified consensus scheme. The analysis suggests that similar convergence should hold under more general conditions as well.
△ Less
Submitted 28 September, 2011;
originally announced September 2011.
-
Distributed Algorithms for Consensus and Coordination in the Presence of Packet-Drop** Communication Links - Part I: Statistical Moments Analysis Approach
Authors:
Alejandro D. Dominguez-Garcia,
Christoforos N. Hadjicostis,
Nitin H. Vaidya
Abstract:
This two-part paper discusses robustification methodologies for linear-iterative distributed algorithms for consensus and coordination problems in multicomponent systems, in which unreliable communication links may drop packets. We consider a setup where communication links between components can be asymmetric (i.e., component j might be able to send information to component i, but not necessarily…
▽ More
This two-part paper discusses robustification methodologies for linear-iterative distributed algorithms for consensus and coordination problems in multicomponent systems, in which unreliable communication links may drop packets. We consider a setup where communication links between components can be asymmetric (i.e., component j might be able to send information to component i, but not necessarily vice-versa), so that the information exchange between components in the system is in general described by a directed graph that is assumed to be strongly connected. In the absence of communication link failures, each component i maintains two auxiliary variables and updates each of their values to be a linear combination of their corresponding previous values and the corresponding previous values of neighboring components (i.e., components that send information to node i). By appropriately initializing these two (decoupled) iterations, the system components can asymptotically calculate variables of interest in a distributed fashion; in particular, the average of the initial conditions can be calculated as a function that involves the ratio of these two auxiliary variables. The focus of this paper to robustify this double-iteration algorithm against communication link failures. We achieve this by modifying the double-iteration algorithm (by introducing some additional auxiliary variables) and prove that the modified double-iteration converges almost surely to average consensus. In the first part of the paper, we study the first and second moments of the two iterations, and use them to establish convergence, and illustrate the performance of the algorithm with several numerical examples. In the second part, in order to establish the convergence of the algorithm, we use coefficients of ergodicity commonly used in analyzing inhomogeneous Markov chains.
△ Less
Submitted 28 September, 2011;
originally announced September 2011.