-
Probing the nature of the $χ_{c1}(3872)$ state using radiative decays
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1094 additional authors not shown)
Abstract:
The radiative decays $χ_{c1}(3872)\rightarrowψ(2S)γ$ and $χ_{c1}(3872)\rightarrow J/ψγ$ are used to probe the~nature of the~$χ_{c1}(3872)$ state using proton-proton collision data collected with the LHCb detector, corresponding to an~integrated luminosity of~9fb$^{-1}$. Using the~$B^+\rightarrow χ_{c1}(3872)K^+$decay, the $χ_{c1}(3872)\rightarrow ψ(2S)γ$ process is observed for the first time and…
▽ More
The radiative decays $χ_{c1}(3872)\rightarrowψ(2S)γ$ and $χ_{c1}(3872)\rightarrow J/ψγ$ are used to probe the~nature of the~$χ_{c1}(3872)$ state using proton-proton collision data collected with the LHCb detector, corresponding to an~integrated luminosity of~9fb$^{-1}$. Using the~$B^+\rightarrow χ_{c1}(3872)K^+$decay, the $χ_{c1}(3872)\rightarrow ψ(2S)γ$ process is observed for the first time and the ratio of its partial width to that of the $χ_{c1}(3872)\rightarrow J/ψγ$ decay is measured to be $$ \frac{Γ_{χ_{c1}(3872)\rightarrow ψ(2S)γ}}
{Γ_{χ_{c1}(3872)\rightarrow J/ψγ}} = 1.67 \pm 0.21 \pm 0.12 \pm0.04 , $$ where the first uncertainty is statistical, the second systematic and the third is due to the uncertainties on the branching fractions of the $ψ(2S)$ and $J/ψ$ mesons. The measured ratio makes the interpretation of the $χ_{c1}(3872)$ state as a~pure $D^0\bar{D}^{*0}+\bar{D}^0D^{*0}$ molecule questionable and strongly indicates a sizeable compact charmonium or tetraquark component within the $χ_{c1}(3872)$ state.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Precision measurement of the $Ξ^-_b$ baryon lifetime
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1064 additional authors not shown)
Abstract:
A sample of $pp$ collision data, corresponding to an integrated luminosity of 5.5 fb$^{-1}$ and collected by the LHCb experiment during Run 2, is used to measure the ratio of the lifetime of the $Ξ^-_b$ baryon to that of the $Λ^0_b$ baryon, $r_τ\equivτ_{Ξ^-_b}/τ_{Λ^0_b}$. The value ${r_τ^{\rm Run\,2}=1.076\pm0.013\pm0.006}$ is obtained, where the first uncertainty is statistical and the second sys…
▽ More
A sample of $pp$ collision data, corresponding to an integrated luminosity of 5.5 fb$^{-1}$ and collected by the LHCb experiment during Run 2, is used to measure the ratio of the lifetime of the $Ξ^-_b$ baryon to that of the $Λ^0_b$ baryon, $r_τ\equivτ_{Ξ^-_b}/τ_{Λ^0_b}$. The value ${r_τ^{\rm Run\,2}=1.076\pm0.013\pm0.006}$ is obtained, where the first uncertainty is statistical and the second systematic. This value is averaged with the corresponding value from Run 1 to obtain ${r_τ^{\rm Run\,1,2} = 1.078\pm0.012\pm0.007}$. Multiplying by the world-average value of the $Λ^0_b$ lifetime yields $τ_{Ξ^-_b}^{\rm Run~1,2} = 1.578\pm0.018\pm0.010\pm0.011$ ps, where the uncertainties are statistical, systematic, and due to the limited knowledge of the $Λ^0_b$ lifetime. This measurement improves the precision of the current world average of the $Ξ^-_b$ lifetime by about a factor of two, and is in good agreement with the most recent theoretical predictions.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Measurement of the branching fraction ratios $R(D^{+})$ and $R(D^{*+})$ using muonic $τ$ decays
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1063 additional authors not shown)
Abstract:
The branching fraction ratios of $\overline{B}^0\to D^+τ^-\overlineν_τ$ and $\overline{B}^0\to D^{*+}τ^-\overlineν_τ$ decays are measured with respect to their muonic counterparts, using a data sample corresponding to an integrated luminosity of 2.0 fb$^{-1}$ collected by the LHCb experiment in proton-proton collisions at $\sqrt{s} = 13$ TeV. The reconstructed final states are formed by combining…
▽ More
The branching fraction ratios of $\overline{B}^0\to D^+τ^-\overlineν_τ$ and $\overline{B}^0\to D^{*+}τ^-\overlineν_τ$ decays are measured with respect to their muonic counterparts, using a data sample corresponding to an integrated luminosity of 2.0 fb$^{-1}$ collected by the LHCb experiment in proton-proton collisions at $\sqrt{s} = 13$ TeV. The reconstructed final states are formed by combining $D^+$ mesons with $τ^-\toμ^-\overlineν_μν_τ$ candidates, where the $D^+$ is reconstructed via the $D^+\to K^-π^+π^+$ decay. The results are
\begin{align*}
R(D^{+}) &= 0.249 \pm 0.043 \pm 0.047,
R(D^{*+}) &= 0.402 \pm 0.081\pm 0.085,
\end{align*}
where the first uncertainties are statistical and the second systematic. The two measurements have a correlation coefficient of $-0.39$ and are compatible with the Standard Model.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Comprehensive analysis of local and nonlocal amplitudes in the $B^0\rightarrow K^{*0}μ^+μ^-$ decay
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1070 additional authors not shown)
Abstract:
A comprehensive study of the local and nonlocal amplitudes contributing to the decay $B^0\rightarrow K^{*0}(\to K^+π^-) μ^+μ^-$ is performed by analysing the phase-space distribution of the decay products. The analysis is based on \proton\proton collision data corresponding to an integrated luminosity of 8.4fb$^{-1}$ collected by the LHCb experiment. This measurement employs for the first time a m…
▽ More
A comprehensive study of the local and nonlocal amplitudes contributing to the decay $B^0\rightarrow K^{*0}(\to K^+π^-) μ^+μ^-$ is performed by analysing the phase-space distribution of the decay products. The analysis is based on \proton\proton collision data corresponding to an integrated luminosity of 8.4fb$^{-1}$ collected by the LHCb experiment. This measurement employs for the first time a model of both one-particle and two-particle nonlocal amplitudes, and utilises the complete dimuon mass spectrum without any veto regions around the narrow charmonium resonances. In this way it is possible to explicitly isolate the local and nonlocal contributions and capture the interference between them. The results show that interference with nonlocal contributions, although larger than predicted, only has a minor impact on the Wilson Coefficients determined from the fit to the data. For the local contributions, the Wilson Coefficient $C_9$, responsible for vector dimuon currents, exhibits a $2.1σ$ deviation from the Standard Model expectation. The Wilson Coefficients $C_{10}$, $C_{9}'$ and $C_{10}'$ are all in better agreement than $C_{9}$ with the Standard Model and the global significance is at the level of $1.5σ$. The model used also accounts for nonlocal contributions from $B^{0}\to K^{*0}\left[τ^+τ^-\to μ^+μ^-\right]$ rescattering, resulting in the first direct measurement of the $b sττ$ vector effective-coupling $C_{9τ}$.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Search for the lepton-flavor violating decay $B^0_s\toφμ^\pmτ^\mp$
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1062 additional authors not shown)
Abstract:
A search for the lepton-flavor violating decays $B^0_s\toφμ^\pmτ^\mp$ is presented, using a sample of proton-proton collisions at center-of-mass energies of 7, 8, and 13 TeV, collected with the LHCb detector and corresponding to a total integrated luminosity of $9\,\text{fb}^{-1}$. The $τ$ leptons are selected using decays with three charged pions. No significant excess is observed, and an upper l…
▽ More
A search for the lepton-flavor violating decays $B^0_s\toφμ^\pmτ^\mp$ is presented, using a sample of proton-proton collisions at center-of-mass energies of 7, 8, and 13 TeV, collected with the LHCb detector and corresponding to a total integrated luminosity of $9\,\text{fb}^{-1}$. The $τ$ leptons are selected using decays with three charged pions. No significant excess is observed, and an upper limit on the branching fraction is determined to be ${\cal B}( B^0_s\toφμ^\pmτ^\mp) < 1.0\times 10^{-5}$ at 90% confidence level.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Study of $b$-hadron decays to $Λ_c^+ h^- h^{\prime -}$ final states
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1072 additional authors not shown)
Abstract:
Decays of $Ξ_b^-$ and $Ω_b^-$ baryons to $Λ_c^+ h^- h^{\prime -}$ final states, with $h^- h^{\prime -}$ being $π^-π^-$, $K^-π^-$ and $K^-K^-$ meson pairs, are searched for using data collected with the LHCb detector. The data sample studied corresponds to an integrated luminosity of $8.7\,\mathrm{fb}^{-1}$ of $pp$ collisions collected at centre-of-mass energies $\sqrt{s} = 7$, $8$ and…
▽ More
Decays of $Ξ_b^-$ and $Ω_b^-$ baryons to $Λ_c^+ h^- h^{\prime -}$ final states, with $h^- h^{\prime -}$ being $π^-π^-$, $K^-π^-$ and $K^-K^-$ meson pairs, are searched for using data collected with the LHCb detector. The data sample studied corresponds to an integrated luminosity of $8.7\,\mathrm{fb}^{-1}$ of $pp$ collisions collected at centre-of-mass energies $\sqrt{s} = 7$, $8$ and $13\,\mathrm{Te\kern -0.1em V}$. The products of the relative branching fractions and fragmentation fractions for each signal mode, relative to the $B^- \to Λ_c^+ \overline{p} π^-$ mode, are measured, with $Ξ_{b}^- \toΛ_{c}^+ K^- π^-$, $Ξ_{b}^- \toΛ_{c}^+ K^- K^-$ and $Ω_{b}^- \toΛ_{c}^+ K^- K^-$ decays being observed at over $5\,σ$ significance. The $Ξ_{b}^- \toΛ_{c}^+ K^- π^-$ mode is also used to measure the $Ξ_{b}^-$ production asymmetry, which is found to be consistent with zero. In addition, the $B^- \to Λ_{c}^+ \overline{p} K^-$ decay is observed for the first time, and its branching fraction is measured relative to that of the $B^- \to Λ_{c}^+ \overline{p} π^-$ mode.
△ Less
Submitted 22 May, 2024; v1 submitted 21 May, 2024;
originally announced May 2024.
-
Transverse polarization measurement of $Λ$ hyperons in $p$Ne collisions at $\sqrt{s_{NN}}$ = 68.4 GeV with the $\mbox{LHCb}$ detector
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
T. Ackernley,
A. A. Adefisoye,
B. Adeva,
M. Adinolfi,
P. Adlarson,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato,
J. L. Amey,
Y. Amhis
, et al. (1065 additional authors not shown)
Abstract:
A measurement of the transverse polarization of the $Λ$ and $\barΛ$ hyperons in $p$Ne fixed-target collisions at $\sqrt{s_{NN}}$ = 68.4 GeV is presented using data collected by the LHCb detector. The polarization is studied using the decay $Λ\rightarrow p π^-$ together with its charge conjugated process, the integrated values measured are…
▽ More
A measurement of the transverse polarization of the $Λ$ and $\barΛ$ hyperons in $p$Ne fixed-target collisions at $\sqrt{s_{NN}}$ = 68.4 GeV is presented using data collected by the LHCb detector. The polarization is studied using the decay $Λ\rightarrow p π^-$ together with its charge conjugated process, the integrated values measured are
$$ P_Λ = 0.029 \pm 0.019 \, (\rm{stat}) \pm 0.012 \, (\rm{syst}) \, , $$ $$ P_{\barΛ} = 0.003 \pm 0.023 \, (\rm{stat}) \pm 0.014 \,(\rm{syst}) \,. $$
Furthermore, the results are shown as a function of the Feynman~$x$~variable, transverse momentum, pseudorapidity and rapidity of the hyperons, and are compared with previous measurements.
△ Less
Submitted 24 May, 2024; v1 submitted 18 May, 2024;
originally announced May 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Development of novel low-mass module concepts based on MALTA monolithic pixel sensors
Authors:
J Weick,
F Dachs,
P Riedler,
M Vicente Barreto Pinto,
A M. Zoubir,
L Flores Sanz de Acedo,
I Asensi Tortajada,
V Dao,
D Dobrijevic,
H Pernegger,
M Van Rijnbach,
A Sharma,
C Solans Sanchez,
R de Oliveira,
D Dannheim,
J V Schmidt
Abstract:
The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire modu…
▽ More
The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire module via one chip only. Novel technologies such as Anisotropic Conductive Films (ACF) and nanowires have been investigated to build a compact module. A lightweight flex with 17 μm trace spacing has been designed, allowing compact packaging with a direct attachment of the chip connection pads to the flex using these interconnection technologies. This contribution shows the current state of our work towards a flexible, low material, dense and reliable packaging and modularization of pixel detectors.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Characterization of Charge Spreading and Gain of Encapsulated Resistive Micromegas Detectors for the Upgrade of the T2K Near Detector Time Projection Chambers
Authors:
D. Attie,
O. Ballester,
M. Batkiewicz-Kwasnia,
P. Billoir,
A. Blondel,
S. Bolognesi,
R. Boullon,
D. Calvet,
M. P. Casado,
M. G. Catanesi,
M. Cicerchia,
G. Cogo,
P. Colas,
G. Collazuol,
D. D Ago,
C. Dalmazzon,
T. Daret,
A. Delbart,
A. De Lorenzis,
R. de Oliveira,
S. Dolan,
K. Dygnarowiczi,
J. Dumarchez,
S. Emery-Schren,
A. Ershova
, et al. (70 additional authors not shown)
Abstract:
An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with 16 charge readout resistive Micromegas modules. A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and relia…
▽ More
An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with 16 charge readout resistive Micromegas modules. A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and reliable operation of the detectors once installed. A dedicated X-ray test bench is used to characterize the detectors by scanning each pad individually and to precisely measure the uniformity of the gain and the deposited energy resolution over the pad plane. An energy resolution of about 10% is obtained. A detailed physical model has been developed to describe the charge dispersion phenomena in the resistive Micromegas anode. The detailed physical description includes initial ionization, electron drift, diffusion effects and the readout electronics effects. The model provides an excellent characterization of the charge spreading of the experimental measurements and allowed the simultaneous extraction of gain and RC information of the modules.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Microchannel cooling for the LHCb VELO Upgrade I
Authors:
Oscar Augusto De Aguiar Francisco,
Wiktor Byczynski,
Kazu Akiba,
Claudia Bertella,
Alexander Bitadze,
Matthew Brock,
Bartosz Bulat,
Guillaume Button,
Jan Buytaert,
Stefano De Capua,
Riccardo Callegari,
Christine Castellana,
Andrea Catinaccio,
Catherine Charrier,
Collette Charvet,
Victor Coco,
Paula Collins,
Jordan Degrange,
Raphael Dumps,
Diego Alvarez Feito,
Julian Freestone,
Mariusz Jedrychowski,
Vinicius Franco Lima,
Abraham Gallas,
Wouter Hulsbergen
, et al. (35 additional authors not shown)
Abstract:
The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures…
▽ More
The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures was completed in September 2021. This paper describes the R\&D path supporting the microchannel production and assembly and the motivation for the design choices. The microchannel coolers have excellent thermal peformance, low and uniform mass, no thermal expansion mismatch with the ASICs and are radiation hard. The fluidic and thermal performance is presented.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Development of very-thick transparent GEMs with wavelength-shifting capability for noble element TPCs
Authors:
M. Kuźniak,
D. González-Díaz,
P. Amedo,
C. D. R. Azevedo,
D. J. Fernández-Posada,
M. Kuźwa,
S. Leardini,
A. Leonhardt,
T. Łęcki,
L. Manzanillas,
D. Muenstermann,
G. Nieradka,
R. de Oliveira,
T. R. Pollmann,
A. Saá Hernández,
T. Sworobowicz,
C. Türkoğlu,
S. Williams
Abstract:
A new concept for the simultaneous detection of primary and secondary scintillation in time projection chambers is proposed. Its core element is a type of very-thick GEM structure supplied with transparent electrodes and machined from a polyethylene naphthalate plate, a natural wavelength-shifter. Such a device has good prospects for scalability and, by virtue of its genuine optical properties, it…
▽ More
A new concept for the simultaneous detection of primary and secondary scintillation in time projection chambers is proposed. Its core element is a type of very-thick GEM structure supplied with transparent electrodes and machined from a polyethylene naphthalate plate, a natural wavelength-shifter. Such a device has good prospects for scalability and, by virtue of its genuine optical properties, it can improve on the light collection efficiency, energy threshold and resolution of conventional micropattern gas detectors. This, together with the intrinsic radiopurity of its constituting elements, offers advantages for noble gas and liquid based time projection chambers, used for dark matter searches and neutrino experiments. Production, optical and electrical characterization, and first measurements performed with the new device are reported.
△ Less
Submitted 15 March, 2022; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
T2K ND280 Upgrade -- Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
D. Attié,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
J. Boix,
S. Bolognesi
, et al. (359 additional authors not shown)
Abstract:
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve…
▽ More
In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented.
△ Less
Submitted 14 October, 2020; v1 submitted 11 January, 2019;
originally announced January 2019.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Charge Transfer Properties Through Graphene for Applications in Gaseous Detectors
Authors:
S. Franchino,
D. Gonzalez-Diaz,
R. Hall-Wilton,
R. B. Jackman,
H. Muller,
T. T. Nguyen,
R. de Oliveira,
E. Oliveri,
D. Pfeiffer,
F. Resnati,
L. Ropelewski,
J. Smith,
M. van Stenis,
C. Streli,
P. Thuiner,
R. Veenhof
Abstract:
Graphene is a single layer of carbon atoms arranged in a honeycomb lattice with remarkable mechanical and electrical properties. Regarded as the thinnest and narrowest conductive mesh, it has drastically different transmission behaviours when bombarded with electrons and ions in vacuum. This property, if confirmed in gas, may be a definitive solution for the ion back-flow problem in gaseous detect…
▽ More
Graphene is a single layer of carbon atoms arranged in a honeycomb lattice with remarkable mechanical and electrical properties. Regarded as the thinnest and narrowest conductive mesh, it has drastically different transmission behaviours when bombarded with electrons and ions in vacuum. This property, if confirmed in gas, may be a definitive solution for the ion back-flow problem in gaseous detectors. In order to ascertain this aspect, graphene layers of dimensions of about 2x2cm$^2$, grown on a copper substrate, are transferred onto a flat metal surface with holes, so that the graphene layer is freely suspended. The graphene and the support are installed into a gaseous detector equipped with a triple Gaseous Electron Multiplier (GEM), and the transparency properties to electrons and ions are studied in gas as a function of the electric fields. The techniques to produce the graphene samples are described, and we report on preliminary tests of graphene-coated GEMs.
△ Less
Submitted 16 December, 2015;
originally announced December 2015.
-
The Resistive-WELL detector: a compact spark-protected single amplification-stage MPGD
Authors:
G. Bencivenni,
R. De Oliveira,
G. Morello,
M. Poli Lener
Abstract:
In this work we present a novel idea for a compact spark-protected single amplification stage Micro-Pattern Gas Detector (MPGD). The detector amplification stage, realized with a structure very similar to a GEM foil, is embedded through a resistive layer in the readout board. A cathode electrode, defining the gas conversion/drift gap, completes the detector mechanics. The new structure, that we ca…
▽ More
In this work we present a novel idea for a compact spark-protected single amplification stage Micro-Pattern Gas Detector (MPGD). The detector amplification stage, realized with a structure very similar to a GEM foil, is embedded through a resistive layer in the readout board. A cathode electrode, defining the gas conversion/drift gap, completes the detector mechanics. The new structure, that we call Resistive-WELL (R-WELL), has some characteristics in common with previous MPGDs, such as C.A.T. and WELL, developed more than ten years ago. The prototype object of the present study has been realized in the 2009 by TE-MPE-EM Workshop at CERN. The new architecture is a very compact MPGD, robust against discharges and exhibiting a large gain ($\sim$6$\times$10$^3$), simple to construct and easy for engineering and then suitable for large area tracking devices as well as huge calorimetric apparata.
△ Less
Submitted 10 November, 2014;
originally announced November 2014.
-
Ageing studies of resistive Micromegas detectors for the HL-LHC
Authors:
J. Galan,
D. Attie,
E. Ferrer-Ribas,
A. Giganon,
I. Giomataris,
S. Herlant,
F. Jeanneau,
A. Peyaud,
Ph. Schune,
T. Alexopoulos,
M. Byszewski,
G. Iakovidis,
P. Iengo,
K. Ntekas,
S. Leontsinis,
R. de Oliveira,
Y. Tsipolitis,
J. Wotschack
Abstract:
Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to asse…
▽ More
Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiations (X-rays, cold neutrons, 60 Co gammas) up to an equivalent HL-LHC time of more than five years without showing any degradation of the performances in terms of gain and energy resolution. Beam test studies took place in October 2012 to assess the tracking performances (efficiency, spatial resolution,...). Results of ageing studies and beam test performances are reported in this paper.
△ Less
Submitted 7 April, 2013;
originally announced April 2013.
-
An ageing study of resistive micromegas for the HL-LHC environment
Authors:
J. Galán,
D. Attié,
E. Ferrer-Ribas,
A. Giganon,
I. Giomataris,
S. Herlant,
F. Jeanneau,
A. Peyaud,
Ph. Schune,
T. Alexopoulos,
M. Byszewski,
G. Iakovidis,
P. Iengo,
K. Ntekas,
S. Leontsinis,
R. de Oliveira,
Y. Tsipolitis,
J. Wotschack
Abstract:
Resistive-anode micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working at high flux and high ionizing radiation like in the HL-LHC (up to ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to as…
▽ More
Resistive-anode micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working at high flux and high ionizing radiation like in the HL-LHC (up to ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiation (X-rays, cold neutrons, $^{60}$Co gammas and alphas) above the equivalent charge produced at the detector in five HL-LHC running years without showing any degradation of the performances in terms of gain and energy resolution. This study has been completed with the characterization of the tracking performances in terms of efficiency and spatial resolution, verifying the compatibility of results obtained with both resistive micromegas detectors, irradiated and non-irradiated one.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Construction and Performance of Large-Area Triple-GEM Prototypes for Future Upgrades of the CMS Forward Muon System
Authors:
M. Tytgat,
A. Marinov,
N. Zaganidis,
Y. Ban,
J. Cai,
H. Teng,
A. Mohapatra,
T. Moulik,
M. Abbrescia,
A. Colaleo,
G. de Robertis,
F. Loddo,
M. Maggi,
S. Nuzzo,
S. A. Tupputi,
L. Benussi,
S. Bianco,
S. Colafranceschi,
D. Piccolo,
G. Raffone,
G. Saviano,
M. G. Bagliesi,
R. Cecchi,
G. Magazzu,
E. Oliveri
, et al. (34 additional authors not shown)
Abstract:
At present, part of the forward RPC muon system of the CMS detector at the CERN LHC remains uninstrumented in the high-ηregion. An international collaboration is investigating the possibility of covering the 1.6 < |η| < 2.4 region of the muon endcaps with large-area triple-GEM detectors. Given their good spatial resolution, high rate capability, and radiation hardness, these micro-pattern gas dete…
▽ More
At present, part of the forward RPC muon system of the CMS detector at the CERN LHC remains uninstrumented in the high-ηregion. An international collaboration is investigating the possibility of covering the 1.6 < |η| < 2.4 region of the muon endcaps with large-area triple-GEM detectors. Given their good spatial resolution, high rate capability, and radiation hardness, these micro-pattern gas detectors are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in a future upgrade of the CMS detector. A general overview of this feasibility study will be presented. The design and construction of small (10\times10 cm2) and full-size trapezoidal (1\times0.5 m2) triple-GEM prototypes will be described. During detector assembly, different techniques for stretching the GEM foils were tested. Results from measurements with x-rays and from test beam campaigns at the CERN SPS will be shown for the small and large prototypes. Preliminary simulation studies on the expected muon reconstruction and trigger performances of this proposed upgraded muon system will be reported.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
-
Aging studies of Micromegas prototypes for the HL-LHC
Authors:
J. Galan,
D. Attie,
J. Derre,
E. Ferrer Ribas,
A. Giganon,
I. Giomataris,
F. Jeanneau,
J. Manjarres,
R. de Oliveira,
P. Schune,
M. Titov,
J. Wotschack
Abstract:
The micromegas technology is a promising candidate to replace the forward muon chambers for the luminosity upgrade of ATLAS. The LHC accelerator luminosity will be five times the nominal one, increasing background and pile-up event probability. This requires detector performances which are currently under study in intensive R&D activities. Aging is one of the key issues for a high-luminosity LHC a…
▽ More
The micromegas technology is a promising candidate to replace the forward muon chambers for the luminosity upgrade of ATLAS. The LHC accelerator luminosity will be five times the nominal one, increasing background and pile-up event probability. This requires detector performances which are currently under study in intensive R&D activities. Aging is one of the key issues for a high-luminosity LHC application. For this reason, we study the properties of resistive micromegas detectors under intense X-ray radiation and under thermal neutrons in different CEA-Saclay facilities. This study is complementary to those already performed using fast neutrons.
△ Less
Submitted 25 November, 2011;
originally announced November 2011.
-
Test beam results of the GE1/1 prototype for a future upgrade of the CMS high-$η$ muon system
Authors:
D. Abbaneo,
M. Abbrescia,
C. Armagnaud,
P. Aspell,
M. G. Bagliesi,
Y. Ban,
S. Bally,
L. Benussi,
U. Berzano,
S. Bianco,
J. Bos,
K. Bunkowski,
J. Cai,
R. Cecchi,
J. P. Chatelain,
J. Christiansen,
S. Colafranceschi,
A. Colaleo,
A. Conde Garcia,
E. David,
G. de Robertis,
R. De Oliveira,
S. Duarte Pinto,
S. Ferry,
F. Formenti
, et al. (33 additional authors not shown)
Abstract:
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the $1.6<| η|<2.4$ endcap region. With a sufficiently fine segmentation GEMs can provide precision tracking as well as fast trigger information. The main objective is to contribute to the improvement of the CMS muon trigger. The const…
▽ More
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the $1.6<| η|<2.4$ endcap region. With a sufficiently fine segmentation GEMs can provide precision tracking as well as fast trigger information. The main objective is to contribute to the improvement of the CMS muon trigger. The construction of large-area GEM detectors is challenging both from the technological and production aspects. In view of the CMS upgrade we have designed and built the largest full-size Triple-GEM muon detector, which is able to meet the stringent requirements given the hostile environment at the high-luminosity LHC. Measurements were performed during several test beam campaigns at the CERN SPS in 2010 and 2011. The main issues under study are efficiency, spatial resolution and timing performance with different inter-electrode gap configurations and gas mixtures. In this paper results of the performance of the prototypes at the beam tests will be discussed.
△ Less
Submitted 30 November, 2011; v1 submitted 21 November, 2011;
originally announced November 2011.
-
A spark-resistant bulk-micromegas chamber for high-rate applications
Authors:
J. Burnens,
R. de Oliveira,
G. Glonti,
O. Pizzirusso,
V. Polychronakos,
G. Sekhniaidze,
J. Wotschack
Abstract:
We report on the design and performance of a spark-resistant bulk-micromegas chamber. The principle of this design lends itself to the construction of large-area muon chambers for the upgrade of the detectors at the Large Hadron Collider at CERN for luminosities in excess of 10**34/cm2/s or other high-rate applications.
We report on the design and performance of a spark-resistant bulk-micromegas chamber. The principle of this design lends itself to the construction of large-area muon chambers for the upgrade of the detectors at the Large Hadron Collider at CERN for luminosities in excess of 10**34/cm2/s or other high-rate applications.
△ Less
Submitted 24 November, 2010;
originally announced November 2010.
