Showing 1–41 of 41 results for author: Stanitzki, M

ADENIUM -- A demonstrator for a next-generation beam telescope at DESY

Authors: Yi Liu, Changqing Feng, Ingrid-Maria Gregor, Adrian Herkert, Lennart Huth, Marcel Stanitzki, Yao Teng, Chenfei Yang

Abstract: High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor bas… ▽ More High-resolution beam telescopes for charged particle tracking are one of the most important and equally demanding infrastructure items at test beam facilities. The main purpose of beam telescopes is to provide precise reference track information of beam particles to measure the performance of a device under test (DUT). In this report the development of the ADENIUM beam telescope (ALPIDE sensor based DESY Next test beam Instrument) as a demonstrator and prototype for a next-generation beam telescope is presented. The ADENIUM beam telescope features up to six pixelated reference planes framed by plastic scintillators for triggering. ADENIUM is capable of replacing the currently used EUDET-type beam telescopes without impacting existing DUT implementations due to the integration of the telescope DAQ into EUDAQ2. In this report the concept and design of the ADENIUM telescope as well as its performance are discussed. The telescope's pointing resolution is determined in different configurations. For an optimal setup at an momentum of 5.6 GeV with an ALPIDE as DUT, a resolution better than 3 um has been extracted. No rate limitations have been observed at the DESY II test beam. △ Less

Submitted 1 June, 2023; v1 submitted 14 January, 2023; originally announced January 2023.

Comments: 11 pages, 8 figures

Report number: PUBDB-2022-07438

TelePix -- A fast region of interest trigger and timing layer for the EUDET Telescopes

Authors: Heiko Augustin, Sebastian Dittmeier, Jan Hammerich, Adrian Herkert, Lennart Huth, David Immig, Ivan Perić, André Schöning, Adriana Simancas, Marcel Stanitzki, Benjamin Weinläder

Abstract: Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter archite… ▽ More Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter architecture to a precision of approximately 230 $μ$s. Since the demand on particle rates -- and hence track multiplicities -- is increasing timing is becoming more relevant. DESY foresees several upgrades of the telescopes. TelePix is an upgrade project to provide track timestam** with a precision of better than 5 ns and a configurable region of interest to trigger the telescope readout. Small scale prototypes have been characterised in laboratory and test beam measurements. Laboratory tests with an injection corresponding to 2300 electrons show a S/N of above 20. Test beam characterization shows efficiencies of above 99% over a threshold range of more than 100 mV and time resolutions of 2.4 ns at low noise rates. △ Less

Submitted 20 December, 2022; originally announced December 2022.

Comments: Preprint submitted to Proceedings of the 15th Pisa Meeting on Advanced Detectors

Upgrading the Beam Telescopes at the DESY II Test Beam Facility

Authors: H. Augustin, R. Diener, S. Dittmeier, P. M. Freeman, J. Hammerich, A. Herkert, L. Huth, D. Immig, U. Krämer, N. Meyners, I. Perić, O. Schäfer, A. Schöning, A. Simancas, M. Stanitzki, D. Stuart, B. Weinläder

Abstract: The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered… ▽ More The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered readout and a readout time of > 115 $μ$s. If the highest available rates are used, multiple particles are traversing the telescopes within one readout frame, thus creating ambiguities that cannot be resolved without additional timing layers. Several upgrades are currently investigated and tested: Firstly, a fast monolithic pixel sensor, the TelePix, to provide precise track timing and triggering on a region of interest is proposed to overcome this limitation. The TelePix is a 180 nm HV-CMOS sensor that has been developed jointly by DESY, KIT and the University of Heidelberg and designed at KIT. In this publication, the performance evaluation is presented: The difference between two amplifier designs is evaluated. A high hit detection efficiency of above 99.9 % combined with a time resolution of below 4 ns at negligible pixel noise rates is determined. Finally, the digital hit output to provide region of interest triggering is evaluated and shows a short absolute delay with respect to a traditional trigger scintillator as well as an excellent time resolution. Secondly, a fast LGAD plane has been proposed to provide a time resolution of a few 10 ps, which is foreseen to drastically improve the timing performance of the telescope. Time resolutions of below 70 ps have been determined in collaboration with the University of California, Santa Barbara. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Journal ref: NIM-A 1040,167-183, 2022

The Tangerine project: Development of high-resolution 65 nm silicon MAPS

Authors: Håkan Wennlöf, Ankur Chauhan, Manuel Del Rio Viera, Doris Eckstein, Finn Feindt, Ingrid-Maria Gregor, Karsten Hansen, Lennart Huth, Larissa Mendes, Budi Mulyanto, Daniil Rastorguev, Christian Reckleben, Sara Ruiz Daza, Paul Schütze, Adriana Simancas, Simon Spannagel, Marcel Stanitzki, Anastasiia Velyka, Gianpiero Vignola

Abstract: The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced… ▽ More The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced power consumption and material budget compared to other processes. The process is envisioned to be used in for example the next ALICE inner tracker upgrade, and in experiments at the electron-ion collider. The initial goal of the three-year Tangerine project is to develop and test a sensor in a 65 nm CMOS imaging process that can be used in test beam telescopes at DESY, providing excellent spatial resolution and high time resolution, and thus demonstrating the capabilities of the process. The project covers all aspects of sensor R&D, from electronics and sensor design using simulations, to prototype test chip characterisation in labs and at test beams. The sensor design simulations are performed by using a powerful combination of detailed electric field simulations using technology computer-aided design and high-statistics Monte Carlo simulations using the Allpix Squared framework. A first prototype test chip in the process has been designed and produced, and successfully operated and tested both in labs and at test beams. △ Less

Submitted 11 June, 2022; originally announced June 2022.

Comments: 5 pages, 5 figures. Proceedings of VCI 2022: The 16th Vienna Conference on Instrumentation, submitted to Nucl. Instrum. Methods Phys. Res. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1039C (2022) 167025

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Updating the SiD Detector concept

Authors: M. Breidenbach, J. E. Brau, P. Burrows, T. Markiewicz, M. Stanitzki, J. Strube, A. P. White

Abstract: The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momen… ▽ More The SiD Detector is one of two detector designs for the future International Linear Collider (ILC) that were validated in 2012 SiD features a compact, cost-constrained design for precision Higgs and other measurements, and sensitivity to a wide range of possible new phenomena. A robust silicon vertex and tracking system, combined with a five Tesla central solenoidal field, provides excellent momentum resolution. The highly granular calorimeter system is optimized for Particle Flow application to achieve very good jet energy resolution over a wide range of energies. With a potential construction date of the ILC moving closer, it is now the time to review the design and technology decision that have been made during the DBD phase and reconsider them in the light of the recent technological advances. For each area of SiD development R&D topics and opportunities for participation will be discussed. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Map** the material distribution of a complex structure in an electron beam

Authors: Luise Poley, Ulf Stolzenberg, Benjamin Schwenker, Ariane Frey, Peter Göttlicher, Carlos Marinas, Marcel Stanitzki, Bernd Stelzer

Abstract: The simulation and analysis of High Energy Physics experiments require a realistic simulation of the detector material and its distribution. The challenge is to describe all active and passive parts of large scale detectors like ATLAS in terms of their size, position and material composition. The common method for estimating the radiation length by weighing individual components, adding up their c… ▽ More The simulation and analysis of High Energy Physics experiments require a realistic simulation of the detector material and its distribution. The challenge is to describe all active and passive parts of large scale detectors like ATLAS in terms of their size, position and material composition. The common method for estimating the radiation length by weighing individual components, adding up their contributions and averaging the resulting material distribution over extended structures provides a good general estimate, but can deviate significantly from the material actually present. A method has been developed to assess its material distribution with high spatial resolution using the reconstructed scattering angles and hit positions of high energy electron tracks traversing an object under investigation. The study presented here shows measurements for an extended structure with a highly inhomogeneous material distribution. The structure under investigation is an End-of-Substructure-card prototype designed for the ATLAS Inner Tracker strip tracker -- a PCB populated with components of a large range of material budgets and sizes. The measurements presented here summarise requirements for data samples and reconstructed electron tracks for reliable image reconstruction of large scale, inhomogeneous samples, choices of pixel sizes compared to the size of features under investigation as well as a bremsstrahlung correction for high material densities and thicknesses. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: published in Journal of Instrumentation, Volume 16, January 2021

Lycoris -- a large-area, high resolution beam telescope

Authors: James Brau, Martin Breidenbach, Dietrich R. Freytag, Claus Kleinwort, Uwe Kraemer, Benjamin A. Reese, Sebastiaan Roelofs, Marcel Stanitzki, Amanda Steinhebel, Dimitra Tsionou, Mengqing Wu

Abstract: A high-resolution beam telescope is one of the most important and demanding infrastructure components at any test beam facility. Its main purpose is to provide reference particle tracks from the incoming test beam particles to the test beam users, which allows measurement of the performance of the device-under-test (DUT). \LYCORIS, a six-plane compact beam telescope with an active area of $\sim$10… ▽ More A high-resolution beam telescope is one of the most important and demanding infrastructure components at any test beam facility. Its main purpose is to provide reference particle tracks from the incoming test beam particles to the test beam users, which allows measurement of the performance of the device-under-test (DUT). \LYCORIS, a six-plane compact beam telescope with an active area of $\sim$10$\times$\SI{10}{\square\centi\metre} (extensible to 10$\times$\SI{20}{\square\centi\metre}) was installed at the \DIITBF in 2019, to provide a precise momentum measurement in a \SI{1}{\tesla} solenoid magnet or to provide tracking over a large area. The overall design of \LYCORIS will be described as well as the performance of the chosen silicon sensor. The \SI{25}{\micro\metre} pitch micro-strip sensor used for \LYCORIS was originally designed for the \SID detector concept for the International Linear Collider. It adopts a second metallization layer to route signals from strips to the bump-bonded \KPIX ASIC and uses a wire-bonded flex cable for the connection to the DAQ and the power supply system. This arrangement eliminates the need for a dedicated hybrid PCB. Its performance was tested for the first time in this project. The system has been evaluated at the \DIITBF in several test-beam campaigns and has demonstrated an average single-point resolution of \SI{7.07}{\micro\meter}. △ Less

Submitted 28 May, 2021; v1 submitted 21 December, 2020; originally announced December 2020.

Comments: 43 pages, 37 figures

The ABC130 barrel module prototy** programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

Performance of Julia for High Energy Physics Analyses

Authors: Marcel Stanitzki, Jan Strube

Abstract: We argue that the Julia programming language is a compelling alternative to implementations in Python and C++ for common data analysis workflows in high energy physics. We compare the speed of implementations of different workflows in Julia with those in Python and C++. Our studies show that the Julia implementations are competitive for tasks that are dominated by computational load rather than da… ▽ More We argue that the Julia programming language is a compelling alternative to implementations in Python and C++ for common data analysis workflows in high energy physics. We compare the speed of implementations of different workflows in Julia with those in Python and C++. Our studies show that the Julia implementations are competitive for tasks that are dominated by computational load rather than data access. For work that is dominated by data access, we demonstrate an application with concurrent file reading and parallel data processing. △ Less

Submitted 12 January, 2021; v1 submitted 24 March, 2020; originally announced March 2020.

Comments: 16 pages, 4 pages, 1 table, 3 code listings

Report number: PNNL-SA-151985 DESY 20-056

Journal ref: Computing and Software for Big Science (2021) 5:10

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

Authors: P. Ahlburg, S. Arfaoui, J. -H. Arling, H. Augustin, D. Barney, M. Benoit, T. Bisanz, E. Corrin, D. Cussans, D. Dannheim, J. Dreyling-Eschweiler, T. Eichhorn, A. Fiergolski, I. -M. Gregor, J. Grosse-Knetter, D. Haas, L. Huth, A. Irles, H. Jansen, J. Janssen, M. Keil, J. S. Keller, M. Kiehn, H. J. Kim, J. Kroll , et al. (32 additional authors not shown)

Abstract: EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed… ▽ More EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications. △ Less

Submitted 18 November, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 32 pages, 11 figures

EUDAQ2 -- A Flexible Data Acquisition Software Framework for Common Test Beams

Authors: Y. Liu, M. S. Amjad, P. Baesso, D. Cussans, J. Dreyling-Eschweiler, R. Ete, I. Gregor, L. Huth, A. Irles, H. Jansen, K. Krueger, J. Kvasnicka, R. Peschke, E. Rossi, A. Rummler, F. Sefkow, M. Stanitzki, M. Wing, M. Wu

Abstract: The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types… ▽ More The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types, ranging from tracking detectors to calorimeters. EUDAQ2 is suited as an overarching software that links individual detector readout systems and simplifies the integration of multiple detectors. The framework itself supports several triggering and event building modes. This flexibility makes test beams with multiple detectors significantly easier and more efficient, as EUDAQ2 can adapt to the characteristics of each detector prototype during testing. The system has been thoroughly tested during multiple test beams involving different detector prototypes. EUDAQ2 has now been released and is freely available under an open-source license. △ Less

Submitted 4 September, 2019; v1 submitted 23 July, 2019; originally announced July 2019.

Comments: 17 pages, 6 figures

The International Linear Collider. A Global Project

Authors: Hiroaki Aihara, Jonathan Bagger, Philip Bambade, Barry Barish, Ties Behnke, Alain Bellerive, Mikael Berggren, James Brau, Martin Breidenbach, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Dmitri Denisov, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Keisuke Fujii, Juan Fuster, Frank Gaede, Jie Gao, Paul Grannis, Christophe Grojean, Andrew Hutton , et al. (37 additional authors not shown)

Abstract: A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal… ▽ More A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years. △ Less

Submitted 28 January, 2019; originally announced January 2019.

The International Linear Collider. A European Perspective

Authors: Philip Bambade, Ties Behnke, Mikael Berggren, Ivanka Bozovic-Jelisavcic, Philip Burrows, Massimo Caccia, Paul Colas, Gerald Eigen, Lyn Evans, Angeles Faus-Golfe, Brian Foster, Juan Fuster, Frank Gaede, Christophe Grojean, Marek Idzik, Andrea Jeremie, Tadeusz Lesiak, Aharon Levy, Benno List, Jenny List, Joachim Mnich, Olivier Napoly, Carlo Pagani, Roman Poeschl, Francois Richard , et al. (9 additional authors not shown)

Abstract: The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-prec… ▽ More The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour. △ Less

Submitted 28 January, 2019; originally announced January 2019.

The DESY II Test Beam Facility

Authors: Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Ingrid-Maria Gregor, Ulrich Kötz, Uwe Krämer, Norbert Meyners, Natalia Potylitsina-Kube, Anne Schütz, Paul Schütze, Marcel Stanitzki

Abstract: DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed… ▽ More DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed high-precision pixel beam telescopes. This publication gives a detailed description of the facility, the available infrastructure, and the simulated and measured performance. △ Less

Submitted 26 October, 2018; v1 submitted 24 July, 2018; originally announced July 2018.

Comments: 63 pages, 67 figures

Report number: DESY 18-111

Summary and Conclusions of the First DESY Test Beam User Workshop

Authors: Jan-Hendrik Arling, M. Sohail Amjad, Laura Bandiera, Ties Behnke, Dominik Dannheim, Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Andreas Gerbershagen, Ingrid-Maria Gregor, Avetik Hayrapetyan, Hendrik Jansen, Jochen Kaminski, Jiri Kroll, Paolo Martinengo, Norbert Meyners, Christian Müntz, Luise Poley, Benjamin Schwenker, Marcel Stanitzki

Abstract: On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcomi… ▽ More On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcoming years and a first estimate of their needs for beam time in the long-term future beyond 2025. A special focus was also on additional improvements to the facility beyond its current capabilities. △ Less

Submitted 15 May, 2018; v1 submitted 1 February, 2018; originally announced February 2018.

Report number: DESY 18-019

A Study of the Impact of High Cross Section ILC Processes on the SiD Detector Design

Authors: Timothy Barklow, Luc d`Hautuille, Christopher Milke, Bruce Schumm, Anne Schütz, Marcel Stanitzki, Jan Strube

Abstract: The SiD concept is one of two proposed detectors to be mounted at the interaction region of the International Linear Collider (ILC). A substantial ILC background arises from low transverse momentum $\mathrm{e}^{+}\mathrm{e}^{-}$ pairs created by the interaction of the colliding beams' electromagnetic fields. In order to provide hermeticity and sensitivity to beam targeting parameters, a forward Be… ▽ More The SiD concept is one of two proposed detectors to be mounted at the interaction region of the International Linear Collider (ILC). A substantial ILC background arises from low transverse momentum $\mathrm{e}^{+}\mathrm{e}^{-}$ pairs created by the interaction of the colliding beams' electromagnetic fields. In order to provide hermeticity and sensitivity to beam targeting parameters, a forward Beamline Calorimeter (BeamCal) is being designed that will provide coverage down to 5 mrad from the outgoing beam trajectory, and intercept the majority of this pair background. Using the SiD simulation framework, the effect of this pair background on the SiD detector components, especially the vertex detector (VXD) and forward electromagnetic calorimeter (FCAL), is explored. In the case of the FCAL, backgrounds from Bhabha and two-photon processes are also considered. The consequence of several variants of the BeamCal geometry and ILC interaction region configuration are considered for both the vertex detector and BeamCal performance. △ Less

Submitted 25 September, 2016; originally announced September 2016.

Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

Authors: C. Barth, C. A. Betancourt, I. Bloch, F. Bögelspacher, W. de Boer, M. Daniels, A. Dierlamm, R. Eber, G. Eckerlin, D. Eckstein, T. Eichhorn, J. Erfle, L. Feld, E. Garutti, I. -M. Gregor, M. Guthoff, F. Hartmann, M. Hauser, U. Husemann, K. Jakobs, A. Junkes, W. Karpinski, K. Klein, S. Kuehn, H. Lacker , et al. (16 additional authors not shown)

Abstract: While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an env… ▽ More While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Physics at the Terascale" during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R&D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements. △ Less

Submitted 28 April, 2016; originally announced April 2016.

Physics at the e+ e- Linear Collider

Authors: G. Moortgat-Pick, H. Baer, M. Battaglia, G. Belanger, K. Fujii, J. Kalinowski, S. Heinemeyer, Y. Kiyo, K. Olive, F. Simon, P. Uwer, D. Wackeroth, P. M. Zerwas, A. Arbey, M. Asano, J. Bagger, P. Bechtle, A. Bharucha, J. Brau, F. Brummer, S. Y. Choi, A. Denner, K. Desch, S. Dittmaier, U. Ellwanger , et al. (38 additional authors not shown)

Abstract: A comprehensive review of physics at an e+e- Linear Collider in the energy range of sqrt{s}=92 GeV--3 TeV is presented in view of recent and expected LHC results, experiments from low energy as well as astroparticle physics.The report focuses in particular on Higgs boson, Top quark and electroweak precision physics, but also discusses several models of beyond the Standard Model physics such as Sup… ▽ More A comprehensive review of physics at an e+e- Linear Collider in the energy range of sqrt{s}=92 GeV--3 TeV is presented in view of recent and expected LHC results, experiments from low energy as well as astroparticle physics.The report focuses in particular on Higgs boson, Top quark and electroweak precision physics, but also discusses several models of beyond the Standard Model physics such as Supersymmetry, little Higgs models and extra gauge bosons. The connection to cosmology has been analyzed as well. △ Less

Submitted 13 August, 2015; v1 submitted 7 April, 2015; originally announced April 2015.

Comments: 179 pages, plots and references updated, version to be published at EPJC

Report number: DESY 14-241,CERN-PH-TH/2015-042

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

Measurement of the Mass Difference Between Top and Anti-top Quarks at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-b… ▽ More We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-by-event the mass difference to construct templates for top-quark signal events and background events. The resulting mass difference distribution of data compared to signal and background templates using a likelihood fit yields $ΔM_{top} = {M}_{t} - {M}_{\bar{t}} = -1.95 $pm$ 1.11 (stat) $pm$ 0.59 (syst)$ and is in agreement with the standard model prediction of no mass difference. △ Less

Submitted 28 January, 2013; v1 submitted 23 October, 2012; originally announced October 2012.

Comments: Accepted in Phys. Rev. D

Report number: FERMILAB-PUB-12-577-E

Journal ref: Phys. Rev. D 87, 052013 (2013)

Search for the Higgs boson in the all-hadronic final state using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (491 additional authors not shown)

Abstract: This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs… ▽ More This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs boson, or from the incoming quarks that produced the Higgs boson through the vector-boson fusion process. The search is performed using a sample of \sqrt{s} = 1.96 TeV proton-antiproton collisions corresponding to an integrated luminosity of 9.45 fb-1 recorded by the CDF II detector. The data are in agreement with the background model and 95% credibility level upper limits on Higgs boson production are set as a function of the Higgs boson mass. The median expected (observed) limit for a 125GeV/c2 Higgs boson is 11.0 (9.0) times the predicted standard model rate. △ Less

Submitted 29 November, 2012; v1 submitted 31 August, 2012; originally announced August 2012.

Comments: Submitted to Journal of High Energy Physics

Report number: FERMILAB-PUB-12-493-E

Precision Top-Quark Mass Measurements at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jet… ▽ More We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the $W$ boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with {\it in situ} calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, $\mtop = 172.85 $\pm$ 0.71 (stat) $\pm$ 0.85 (syst) GeV/c^{2}.$ △ Less

Submitted 29 July, 2012; originally announced July 2012.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-12-416-E

Journal ref: Phys. Rev. Lett. 109, 152003 (2012)

An inclusive search for the Higgs boson in the four-lepton final state at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events… ▽ More An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events are selected and found to be consistent with the background expectation. We set a 95% credibility limit on the production cross section times the branching ratio and subsequent decay to the four lepton final state for hypothetical Higgs boson masses between 120 GeV/c^2 and 300 GeV/c^2. △ Less

Submitted 20 July, 2012; originally announced July 2012.

Comments: 8 pages, 3 figures

Report number: FERMILAB-PUB-12-399-E

Search for a low mass Standard Model Higgs boson in the tau-tau decay channel in $p\bar{p}$ collisions at $\sqrt{s}$ = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (491 additional authors not shown)

Abstract: We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified th… ▽ More We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified through its semi-hadronic decay.Since no significant excess is observed, a 95% credibility level upper limit on the production cross section times branching ratio to the tau-tau final state is set for hypothetical Higgs boson masses between 100 and 150 GeV/$c^2$. For a Higgs boson of 120 GeV/$c^2$ the observed (expected) limit is 14.6 (15.3) the predicted value. △ Less

Submitted 23 January, 2012; originally announced January 2012.

Comments: 8 pages, 3 figures, submitted to Phys. Rev. Lett

Report number: PUB-12-017-E

Search for Standard Model Higgs Boson Production in Association with a W Boson Using a Matrix Element Technique at CDF in p-bar{p} Collisions at sqrt{s} = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions… ▽ More This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions for signal and background are fit to the observed events using a binned likelihood approach to search for the Higgs boson signal. We find no evidence for a Higgs boson, and 95% confidence level (C.L.) upper limits are set on the Higgs boson production rate. The observed limits range from 3.5 to 37.6 relative to the standard model expectation for Higgs boson masses between 100 and 150 GeV. The 95% C.L. expected limit is estimated from the median of an ensemble of simulated experiments and varies between 2.9 and 32.7 relative to the production rate predicted by the standard model over the Higgs boson mass range studied. △ Less

Submitted 18 April, 2012; v1 submitted 19 December, 2011; originally announced December 2011.

Report number: FERMILAB-PUB-11-664-E

Journal ref: Phys. Rev. D. 85, 072001 (2012)

Measurement of ZZ production in leptonic final states at {\surd}s of 1.96 TeV at CDF

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the… ▽ More In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the Z. The combined measured cross section for pp {\to} ZZ is 1.64^(+0.44)_(-0.38) pb. This is the most precise measurement of the ZZ production cross section in 1.96 TeV pp collisions to date. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-656-E

Journal ref: Phys. Rev. Lett. 108, 101801 (2012)

Search for Standard Model Higgs Boson Production in Association with a W Boson at CDF

Authors: T. Aaltonen, B. Álvarez González, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (476 additional authors not shown)

Abstract: We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds… ▽ More We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds of triggers. The first kind required high-p$_T$ charged leptons and the second required both missing transverse energy and jets. The search selects events consistent with a signature of a single lepton ($e^\pm/μ^\pm$), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method and a jet probability tagging method. Kinematic information is fed in an artificial neural network to improve discrimination between signal and background. The search finds that both the observed number of events and the neural network output distributions are consistent with the standard model background expectations, and sets 95% confidence level upper limits on the production cross section times branching ratio. The limits are expressed as a ratio to the standard model production rate. The limits range from 3.6 (4.3 expected) to 61.1 (43.2 expected) for Higgs masses from 100 to 150 GeV/$c^{2}$, respectively. △ Less

Submitted 8 December, 2011; originally announced December 2011.

Journal ref: Phys.Rev.D 85 (2012) 052002

Search for new phenomena in events with two $Z$ bosons and missing transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (490 additional authors not shown)

Abstract: We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmet… ▽ More We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmetric particles. We study the final state in which one $Z$ boson decays to two charged leptons and the second decays hadronically. In data corresponding to an integrated luminosity of 4.2 fb$^{-1}$ from proton-antiproton collisions recorded by the CDF II detector at the Tevatron, with center-of-mass energy of 1.96 TeV, we find agreement between data and standard-model backgrounds. We calculate 95% confidence level upper limits on the cross section of the process $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$ ranging from 50 fb to 1 pb, depending on the masses of $X_1$ and $X_2$. △ Less

Submitted 7 December, 2011; originally announced December 2011.

Comments: 7 pages, 4 figures. Submitted Phys. Rev. D

Report number: FERMILAB-PUB-11-645-E

Journal ref: Phys. Rev. D 85, 011104(R) (2012)

Search for a Higgs Boson in the Diphoton Final State in p-pbar Collisions at sqrt(s) = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass.… ▽ More A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass. The limits are interpreted in the context of the standard model and one fermiophobic benchmark model where the data exclude fermiophobic Higgs bosons with masses below 114 GeV/c^2 at a 95% Bayesian credibility level. △ Less

Submitted 21 December, 2011; v1 submitted 20 September, 2011; originally announced September 2011.

Comments: Submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-482-E-PPD

Search for WZ+ZZ production with MET + jets with b enhancement at sqrt(s) = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (491 additional authors not shown)

Abstract: Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic… ▽ More Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic decays of $WZ$ and $ZZ$, and we measure the sum of these processes. The number of signal events is extracted using a simultaneous fit to the invariant mass distribution of the two jets for events with two $b$-jet candidates and events without two $b$-jet candidates. We measure a cross section $σ(p\bar{p}\to WZ,ZZ) = 5.8^{+3.6}_{-3.0}$ pb, in agreement with the standard model. △ Less

Submitted 13 January, 2012; v1 submitted 9 August, 2011; originally announced August 2011.

Comments: 10 pages, 5 figures

Report number: FERMILAB-PUB-11-375-E-PPD

Journal ref: Phys. Rev. D 85, 012002 (2012)

Measurement of the top-quark mass in the lepton+jets channel using a matrix element technique with the CDF II detector

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (490 additional authors not shown)

Abstract: A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event pro… ▽ More A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event probability density functions are calculated using signal and background matrix elements, as well as a set of parameterized jet-to-parton transfer functions. The likelihood function is maximized with respect to the top-quark mass, the signal fraction in the sample, and a correction to the jet energy scale (JES) calibration of the calorimeter jets. The simultaneous measurement of the JES correction ($\JES$) amounts to an additional \textit{in situ} jet energy calibration based on the known mass of the hadronically decaying $W$ boson. Using the data sample of 578 lepton+jets candidate events, corresponding to 3.2 $fb^{-1}$ of integrated luminosity, the top-quark mass is measured to be $m_t = \rm 172.4 \pm 1.4\:(stat+\JES) \pm 1.3\:(syst) GeV/{\it c}^2$. △ Less

Submitted 21 September, 2011; v1 submitted 8 August, 2011; originally announced August 2011.

Comments: 9 pages, 4 figures, 3 tables, accepted Phys. Rev. D Rapid Communications

Report number: FERMILAB-PUB-11-374-E-PPD

Journal ref: Phys. Rev. D 84, 071105(R) (2011)

Search for a Heavy Top-Like Quark in p\bar{p} Collisions at {\surd}s = 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, B. Álvarez Gonzálezv, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barriaee, P. Bartos, M. Baucecc , et al. (490 additional authors not shown)

Abstract: We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets… ▽ More We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets. By performing a fit to the two-dimensional distribution of total transverse energy versus reconstructed t quark mass, we set upper limits on the t \bar{t} production cross section and exclude a standard model fourth-generation t' quark decaying to W b (W q) with mass below 358 (340) GeV/c2 at 95% CL. △ Less

Submitted 4 November, 2011; v1 submitted 19 July, 2011; originally announced July 2011.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-11-333-E-PPD

Journal ref: Phys. Rev. Lett. 107, 261801 (2011)

Measurement of branching ratio and Bs0 lifetime in the decay Bs0 -> J/psi f0(980) at CDF

Authors: CDF Collaboration, T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (490 additional authors not shown)

Abstract: We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP… ▽ More We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP eigenstate and corresponds in the standard model to the lifetime of the heavy Bs0 eigenstate. We also measure the product of branching fractions of Bs0 -> J/psi f0(980) and f0(980) -> pi+ pi- relative to the product of branching fractions of Bs0 -> J/psi phi and phi -> K+ K- to be R_f0/phi = 0.257 +_0.020(stat) +-0.014(syst), which is the most precise determination of this quantity to date. △ Less

Submitted 12 September, 2011; v1 submitted 18 June, 2011; originally announced June 2011.

Comments: accepted by Phys. Rev. D

Report number: FERMILAB-PUB-11-279-E

Measurement of the Top Pair Production Cross Section in the Lepton + Jets Channel Using a Jet Flavor Discriminant

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (491 additional authors not shown)

Abstract: We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one… ▽ More We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one b-tagged jet. We perform a simultaneous fit to a jet flavor discriminant across nine samples defined by the number of jets and b-tags. We measure a top cross section of $σ_{t\bar{t}} = 7.64 \pm 0.57 \mathrm{(stat + syst)} \pm 0.45 \mathrm{(luminosity)}$ pb. An advantage of this approach is that many systematic uncertainties are measured in situ and inversely scale with integrated luminosity. △ Less

Submitted 20 September, 2011; v1 submitted 24 March, 2011; originally announced March 2011.

Comments: 7 pages 2 figures, published in PRD as a Rapid Communication, Aug 2011

Journal ref: Phys.Rev.D84:031101,2011

Search for New Dielectron Resonances and Randall-Sundrum Gravitons at the Collider Detector at Fermilab

Authors: T. Aaltonen, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, G. Bauer , et al. (489 additional authors not shown)

Abstract: A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model.… ▽ More A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model. Combined with the 5.4/fb diphoton analysis, the RS-graviton lower mass limit for the coupling k/\bar{M}_{Pl}=0.1 is 1058 GeV/c^2, making it the strongest limit to date. △ Less

Submitted 6 June, 2011; v1 submitted 23 March, 2011; originally announced March 2011.

Comments: 7 pages, 4 figures, 1 table

Journal ref: Phys.Rev.Lett.107:051801,2011

Design Study for a SuperB Pixel Vertex Detector

Authors: A. Bevan, J. Crooks, A. Lintern, A. Nichols, M. Stanitzki, R. Turchetta, F. F. Wilson

Abstract: We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyon… ▽ More We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyond the Standard Model. We investigate different configurations and compare with the baseline designs for the SuperB and BaBar experiments. △ Less

Submitted 11 August, 2010; originally announced August 2010.

Comments: 8 pages and 8 figures, submitted to NIM

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

Authors: The CDF Collaboration, T. Aaltonen, J. Adelman, B. Alvarez Gonzalez, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, A. Apresyan, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, A. Attal, A. Aurisano, F. Azfar, W. Badgett, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, G. Bauer , et al. (554 additional authors not shown)

Abstract: We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We u… ▽ More We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of η-φspace; toward, away, and transverse, where φis the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions. △ Less

Submitted 16 March, 2010; originally announced March 2010.

Comments: Submitted to Phys.Rev.D

Report number: FERMILAB-PUB-10-053-E

Journal ref: Phys.Rev.D82:034001,2010

Analysis of the Decay $e^{+} e^{-} \to \text{invisible} + H(\to μμ)$ at a Collision Energy of 500 GeV

Authors: Jan Strube, Marcel Stanitzki

Abstract: The analysis of $e^{+} e^{-} \to \text{invisible} + H(\to μμ)$ at a next generation linear collider presents an opportunity to study the coupling of the Yukawa couplings of the second generation in a clean environment. We give an overview over the experimental challenges of this analysis at a collision energy of 500 GeV and present an outlook to the results of the analysis at a collision energy… ▽ More The analysis of $e^{+} e^{-} \to \text{invisible} + H(\to μμ)$ at a next generation linear collider presents an opportunity to study the coupling of the Yukawa couplings of the second generation in a clean environment. We give an overview over the experimental challenges of this analysis at a collision energy of 500 GeV and present an outlook to the results of the analysis at a collision energy of 250 GeV. △ Less

Submitted 18 February, 2009; originally announced February 2009.

Comments: 4 pages, presented at LCWS08 in Chicago

Detector Optimization for SiD using PFA

Authors: Marcel Stanitzki

Abstract: A summary of the optimization of the SiD detector is given. To optimize its performance in terms of Particle Flow Algorithms (PFA), five basic detector parameters have been varied and the impact on the obtained energy resolution using Particle Flow Algorithms has been studied using di-jets events. Finally the optimized detector used for the Letter of Intent (LoI) is briefly summarized as a resul… ▽ More A summary of the optimization of the SiD detector is given. To optimize its performance in terms of Particle Flow Algorithms (PFA), five basic detector parameters have been varied and the impact on the obtained energy resolution using Particle Flow Algorithms has been studied using di-jets events. Finally the optimized detector used for the Letter of Intent (LoI) is briefly summarized as a result from these studies. △ Less

Submitted 18 February, 2009; originally announced February 2009.

Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV

Authors: The CDF Collaboration, D. Acosta, J. Adelman, T. Affolder, T. Akimoto, M. G. Albrow, D. Ambrose, S. Amerio, D. Amidei, A. Anastassov, K. Anikeev, A. Annovi, J. Antos, M. Aoki, G. Apollinari, T. Arisawa, J-F. Arguin, A. Artikov, W. Ashmanskas, A. Attal, F. Azfar, P. Azzi-Bacchetta, N. Bacchetta, H. Bachacou, W. Badgett , et al. (605 additional authors not shown)

Abstract: We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.… ▽ More We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively. △ Less

Submitted 29 June, 2005; originally announced June 2005.

Comments: submitted to PRL

Report number: FERMILAB-PUB-05-254-E

Journal ref: Phys.Rev.D72:051107,2005