-
The decays $Σ^{+}\to p \ell^{+}\ell^{-}$ within the standard model and beyond
Authors:
Arnab Roy,
Jusak Tandean,
German Valencia
Abstract:
Motivated by the LHCb measurement of the hyperon decay mode $Σ^+\to pμ^+μ^-$ and prospects for improvement, we revisit the estimates for the rate and muon forward-backward asymmetry within the standard model and beyond. The standard model prediction has a fourfold ambiguity, and we suggest ways to resolve it with other measurements, including possible studies of $Σ^+\to p e^+e^-$ in the BESIII and…
▽ More
Motivated by the LHCb measurement of the hyperon decay mode $Σ^+\to pμ^+μ^-$ and prospects for improvement, we revisit the estimates for the rate and muon forward-backward asymmetry within the standard model and beyond. The standard model prediction has a fourfold ambiguity, and we suggest ways to resolve it with other measurements, including possible studies of $Σ^+\to p e^+e^-$ in the BESIII and LHCb experiments. We use the recent BESIII measurements of $Σ^+\to p γ$ and $Σ^+\to Nπ$ to reduce the uncertainty in the long-distance contribution to $Σ^+\to pμ^+μ^-$. Beyond the standard model, we consider a general effective Hamiltonian at low energy with ten operators whose Wilson coefficients parametrize the new physics. We derive expressions for the $Σ^+\to pμ^+μ^-$ rate and the associated muon forward-backward asymmetry in terms of these coefficients. Finally, we implement the existing constraints from kaon decays, pointing out the extent to which this hyperon mode can constrain the directions in parameter space to which the kaons are not sensitive.
△ Less
Submitted 9 May, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Strategies for Machine Learning Applied to Noisy HEP Datasets: Modular Solid State Detectors from SuperCDMS
Authors:
P. B. Cushman,
M. C. Fritts,
A. D. Chambers,
A. Roy,
T. Li
Abstract:
Background reduction in the SuperCDMS dark matter experiment depends on removing surface events within individual detectors by identifying the location of each incident particle interaction. Position reconstruction is achieved by combining pulse shape information over multiple phonon channels, a task well-suited to machine learning techniques. Data from an Am-241 scan of a SuperCDMS SNOLAB detecto…
▽ More
Background reduction in the SuperCDMS dark matter experiment depends on removing surface events within individual detectors by identifying the location of each incident particle interaction. Position reconstruction is achieved by combining pulse shape information over multiple phonon channels, a task well-suited to machine learning techniques. Data from an Am-241 scan of a SuperCDMS SNOLAB detector was used to study a selection of statistical approaches, including linear regression, artificial neural networks, and symbolic regression. Our results showed that simpler linear regression models were better able than artificial neural networks to generalize on such a noisy and minimal data set, but there are indications that certain architectures and training configurations can counter overfitting tendencies. This study will be repeated on a more complete SuperCDMS data set (in progress) to explore the interplay between data quality and the application of neural networks.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Constraining Asymmetric Dark Matter using Colliders and Direct Detection
Authors:
Arnab Roy,
Basudeb Dasgupta,
Monoranjan Guchait
Abstract:
We reappraise the viability of asymmetric dark matter (ADM) realized as a Dirac fermion coupling dominantly to the Standard Model fermions. Treating the interactions of such a DM particle with quarks/leptons in an effective-interactions framework, we derive updated constraints using mono-jet searches from the Large Hadron Collider (LHC) and mono-photon searches at the Large Electron-Positron (LEP)…
▽ More
We reappraise the viability of asymmetric dark matter (ADM) realized as a Dirac fermion coupling dominantly to the Standard Model fermions. Treating the interactions of such a DM particle with quarks/leptons in an effective-interactions framework, we derive updated constraints using mono-jet searches from the Large Hadron Collider (LHC) and mono-photon searches at the Large Electron-Positron (LEP) collider. We carefully model the detectors used in these experiments, which is found to have significant impact. The constraint of efficient annihilation of the symmetric part of the ADM, as well as other observational constraints are synthesized to produce a global picture. Consistent with previous work, we find that ADM with mass in the range $1-100$ GeV is strongly constrained, thus ruling out its best motivated mass range. However, we find that leptophilic ADM remains allowed for $\gtrsim 10$ GeV DM, including bounds from colliders, direct detection, and stellar heating. We forecast that the Future Circular Collider for electron-positron collisions (FCC-ee) will improve sensitivity to DM-lepton interactions by almost an order of magnitude.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
First observation of liquid xenon electroluminescence with a Microstrip Plate
Authors:
G. Martinez-Lema,
V. Chepel,
A. Roy,
A. Breskin
Abstract:
We report on the first observation of electroluminescence amplification with a Microstrip Plate immersed in liquid xenon. The electroluminescence of the liquid, induced by alpha-particles, was observed in an intense non-uniform electric field in the vicinity of 8-$μ$m narrow anode strips interlaced with wider cathode ones, deposited on the same side of a glass substrate. The electroluminescence yi…
▽ More
We report on the first observation of electroluminescence amplification with a Microstrip Plate immersed in liquid xenon. The electroluminescence of the liquid, induced by alpha-particles, was observed in an intense non-uniform electric field in the vicinity of 8-$μ$m narrow anode strips interlaced with wider cathode ones, deposited on the same side of a glass substrate. The electroluminescence yield in the liquid reached a value of $(35.5 \pm 2.6)$ VUV photons/electron. We propose ways of enhancing this response with more appropriate microstructures towards their potential incorporation as sensing elements in single-phase noble-liquid detectors.
△ Less
Submitted 23 January, 2024; v1 submitted 22 December, 2023;
originally announced December 2023.
-
Electron transfer efficiency in liquid xenon across THGEM holes
Authors:
G. Martínez-Lema,
A. Roy,
A. Breskin,
L. Arazi
Abstract:
Dual-phase liquid-xenon time projection chambers (LXe TPCs) deploying a few tonnes of liquid are presently leading the search for WIMP dark matter. Scaling these detectors to 10-fold larger fiducial masses, while improving their sensitivity to low-mass WIMPs presents difficult challenges in detector design. Several groups are considering a departure from current schemes, towards either single-phas…
▽ More
Dual-phase liquid-xenon time projection chambers (LXe TPCs) deploying a few tonnes of liquid are presently leading the search for WIMP dark matter. Scaling these detectors to 10-fold larger fiducial masses, while improving their sensitivity to low-mass WIMPs presents difficult challenges in detector design. Several groups are considering a departure from current schemes, towards either single-phase liquid-only TPCs, or dual-phase detectors where the electroluminescence region consists of patterned electrodes. Here, we discuss the possible use of Thick Gaseous Electron Multipliers (THGEMs) coated with a VUV photocathode and immersed in LXe as a building block in such designs. We focus on the transfer efficiencies of ionization electrons and photoelectrons emitted from the photocathode through the electrode holes, and show experimentally that efficiencies approaching 100 % can be achieved with realistic voltage settings. The observed voltage dependence of the transfer efficiencies is consistent with electron transport simulations once diffusion and charging-up effects are included.
△ Less
Submitted 9 November, 2023; v1 submitted 16 August, 2023;
originally announced August 2023.
-
Ising Meson Spectroscopy on a Noisy Digital Quantum Simulator
Authors:
Christopher Lamb,
Yicheng Tang,
Robert Davis,
Ananda Roy
Abstract:
Quantum simulation has the potential to be an indispensable technique for the investigation of non-perturbative phenomena in strongly-interacting quantum field theories (QFTs). In the modern quantum era, with Noisy Intermediate Scale Quantum~(NISQ) simulators widely available and larger-scale quantum machines on the horizon, it is natural to ask: what non-perturbative QFT problems can be solved wi…
▽ More
Quantum simulation has the potential to be an indispensable technique for the investigation of non-perturbative phenomena in strongly-interacting quantum field theories (QFTs). In the modern quantum era, with Noisy Intermediate Scale Quantum~(NISQ) simulators widely available and larger-scale quantum machines on the horizon, it is natural to ask: what non-perturbative QFT problems can be solved with the existing quantum hardware? We show that existing noisy quantum machines can be used to analyze the energy spectrum of a large family of strongly-interacting 1+1D QFTs. The latter exhibit a wide-range of non-perturbative effects like `quark confinement' and `false vacuum decay' which are typically associated with higher-dimensional QFTs of elementary particles. We perform quench experiments on IBM's ibmq_mumbai quantum simulator to compute the energy spectrum of 1+1D quantum Ising model with a longitudinal field. The latter model is particularly interesting due to the formation of mesonic bound states arising from a confining potential for the Ising domain-walls, reminiscent of t'Hooft's model of two-dimensional quantum chromodynamics. Our results demonstrate that digital quantum simulation in the NISQ era has the potential to be a viable alternative to numerical techniques such as density matrix renormalization group or the truncated conformal space methods for analyzing QFTs.
△ Less
Submitted 10 June, 2024; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Using a DSL to read ROOT TTrees faster in Uproot
Authors:
Aryan Roy,
Jim Pivarski
Abstract:
Uproot reads ROOT TTrees using pure Python. For numerical and (singly) jagged arrays, this is fast because a whole block of data can be interpreted as an array without modifying the data. For other cases, such as arrays of std::vector<std::vector<float>>, numerical data are interleaved with structure, and the only way to deserialize them is with a sequential algorithm. When written in Python, such…
▽ More
Uproot reads ROOT TTrees using pure Python. For numerical and (singly) jagged arrays, this is fast because a whole block of data can be interpreted as an array without modifying the data. For other cases, such as arrays of std::vector<std::vector<float>>, numerical data are interleaved with structure, and the only way to deserialize them is with a sequential algorithm. When written in Python, such algorithms are very slow.
We solve this problem by writing the same logic in a language that can be executed quickly. AwkwardForth is a Domain Specific Language (DSL), based on Standard Forth with I/O extensions for making Awkward Arrays, and it can be interpreted as a fast virtual machine without requiring LLVM as a dependency. We generate code as late as possible to take advantage of optimization opportunities. All ROOT types previously implemented with Python have been converted to AwkwardForth. Double and triple-jagged arrays, for example, are 400x faster in AwkwardForth than in Python, with multithreaded scaling up to 1 second/GB because AwkwardForth releases the Python GIL. We also investigate the possibility of JIT-compiling the generated AwkwardForth code using LLVM to increase the performance gains. In this paper, we describe design aspects, performance studies, and future directions in accelerating Uproot with AwkwardForth.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
FAIR AI Models in High Energy Physics
Authors:
Javier Duarte,
Haoyang Li,
Avik Roy,
Ruike Zhu,
E. A. Huerta,
Daniel Diaz,
Philip Harris,
Raghav Kansal,
Daniel S. Katz,
Ishaan H. Kavoori,
Volodymyr V. Kindratenko,
Farouk Mokhtar,
Mark S. Neubauer,
Sang Eon Park,
Melissa Quinnan,
Roger Rusack,
Zhizhen Zhao
Abstract:
The findable, accessible, interoperable, and reusable (FAIR) data principles provide a framework for examining, evaluating, and improving how data is shared to facilitate scientific discovery. Generalizing these principles to research software and other digital products is an active area of research. Machine learning (ML) models -- algorithms that have been trained on data without being explicitly…
▽ More
The findable, accessible, interoperable, and reusable (FAIR) data principles provide a framework for examining, evaluating, and improving how data is shared to facilitate scientific discovery. Generalizing these principles to research software and other digital products is an active area of research. Machine learning (ML) models -- algorithms that have been trained on data without being explicitly programmed -- and more generally, artificial intelligence (AI) models, are an important target for this because of the ever-increasing pace with which AI is transforming scientific domains, such as experimental high energy physics (HEP). In this paper, we propose a practical definition of FAIR principles for AI models in HEP and describe a template for the application of these principles. We demonstrate the template's use with an example AI model applied to HEP, in which a graph neural network is used to identify Higgs bosons decaying to two bottom quarks. We report on the robustness of this FAIR AI model, its portability across hardware architectures and software frameworks, and its interpretability.
△ Less
Submitted 29 December, 2023; v1 submitted 9 December, 2022;
originally announced December 2022.
-
FAIR Principles for data and AI models in high energy physics research and education
Authors:
Avik Roy
Abstract:
In recent years, digital object management practices to support findability, accessibility, interoperability, and reusability (FAIR) have begun to be adopted across a number of data-intensive scientific disciplines. These digital objects include datasets, AI models, software, notebooks, workflows, documentation, etc. With the collective dataset at the Large Hadron Collider scheduled to reach the z…
▽ More
In recent years, digital object management practices to support findability, accessibility, interoperability, and reusability (FAIR) have begun to be adopted across a number of data-intensive scientific disciplines. These digital objects include datasets, AI models, software, notebooks, workflows, documentation, etc. With the collective dataset at the Large Hadron Collider scheduled to reach the zettabyte scale by the end of 2032, the experimental particle physics community is looking at unprecedented data management challenges. It is expected that these grand challenges may be addressed by creating end-to-end AI frameworks that combine FAIR and AI-ready datasets, advances in AI, modern computing environments, and scientific data infrastructure. In this work, the FAIR4HEP collaboration explores the interpretation of FAIR principles in the context of data and AI models for experimental high energy physics research. We investigate metrics to quantify the FAIRness of experimental datasets and AI models, and provide open source notebooks to guide new users on the use of FAIR principles in practice.
△ Less
Submitted 27 November, 2022;
originally announced November 2022.
-
Interpretability of an Interaction Network for identifying $H \rightarrow b\bar{b}$ jets
Authors:
Avik Roy,
Mark S. Neubauer
Abstract:
Multivariate techniques and machine learning models have found numerous applications in High Energy Physics (HEP) research over many years. In recent times, AI models based on deep neural networks are becoming increasingly popular for many of these applications. However, neural networks are regarded as black boxes -- because of their high degree of complexity it is often quite difficult to quantit…
▽ More
Multivariate techniques and machine learning models have found numerous applications in High Energy Physics (HEP) research over many years. In recent times, AI models based on deep neural networks are becoming increasingly popular for many of these applications. However, neural networks are regarded as black boxes -- because of their high degree of complexity it is often quite difficult to quantitatively explain the output of a neural network by establishing a tractable input-output relationship and information propagation through the deep network layers. As explainable AI (xAI) methods are becoming more popular in recent years, we explore interpretability of AI models by examining an Interaction Network (IN) model designed to identify boosted $H\to b\bar{b}$ jets amid QCD background. We explore different quantitative methods to demonstrate how the classifier network makes its decision based on the inputs and how this information can be harnessed to reoptimize the model-making it simpler yet equally effective. We additionally illustrate the activity of hidden layers within the IN model as Neural Activation Pattern (NAP) diagrams. Our experiments suggest NAP diagrams reveal important information about how information is conveyed across the hidden layers of deep model. These insights can be useful to effective model reoptimization and hyperparameter tuning.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Deep Learning for the Matrix Element Method
Authors:
Matthew Feickert,
Mihir Katare,
Mark Neubauer,
Avik Roy
Abstract:
Extracting scientific results from high-energy collider data involves the comparison of data collected from the experiments with synthetic data produced from computationally-intensive simulations. Comparisons of experimental data and predictions from simulations increasingly utilize machine learning (ML) methods to try to overcome these computational challenges and enhance the data analysis. There…
▽ More
Extracting scientific results from high-energy collider data involves the comparison of data collected from the experiments with synthetic data produced from computationally-intensive simulations. Comparisons of experimental data and predictions from simulations increasingly utilize machine learning (ML) methods to try to overcome these computational challenges and enhance the data analysis. There is increasing awareness about challenges surrounding interpretability of ML models applied to data to explain these models and validate scientific conclusions based upon them. The matrix element (ME) method is a powerful technique for analysis of particle collider data that utilizes an \textit{ab initio} calculation of the approximate probability density function for a collision event to be due to a physics process of interest. The ME method has several unique and desirable features, including (1) not requiring training data since it is an \textit{ab initio} calculation of event probabilities, (2) incorporating all available kinematic information of a hypothesized process, including correlations, without the need for feature engineering and (3) a clear physical interpretation in terms of transition probabilities within the framework of quantum field theory. These proceedings briefly describe an application of deep learning that dramatically speeds-up ME method calculations and novel cyberinfrastructure developed to execute ME-based analyses on heterogeneous computing platforms.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
FAIR for AI: An interdisciplinary and international community building perspective
Authors:
E. A. Huerta,
Ben Blaiszik,
L. Catherine Brinson,
Kristofer E. Bouchard,
Daniel Diaz,
Caterina Doglioni,
Javier M. Duarte,
Murali Emani,
Ian Foster,
Geoffrey Fox,
Philip Harris,
Lukas Heinrich,
Shantenu Jha,
Daniel S. Katz,
Volodymyr Kindratenko,
Christine R. Kirkpatrick,
Kati Lassila-Perini,
Ravi K. Madduri,
Mark S. Neubauer,
Fotis E. Psomopoulos,
Avik Roy,
Oliver Rübel,
Zhizhen Zhao,
Ruike Zhu
Abstract:
A foundational set of findable, accessible, interoperable, and reusable (FAIR) principles were proposed in 2016 as prerequisites for proper data management and stewardship, with the goal of enabling the reusability of scholarly data. The principles were also meant to apply to other digital assets, at a high level, and over time, the FAIR guiding principles have been re-interpreted or extended to i…
▽ More
A foundational set of findable, accessible, interoperable, and reusable (FAIR) principles were proposed in 2016 as prerequisites for proper data management and stewardship, with the goal of enabling the reusability of scholarly data. The principles were also meant to apply to other digital assets, at a high level, and over time, the FAIR guiding principles have been re-interpreted or extended to include the software, tools, algorithms, and workflows that produce data. FAIR principles are now being adapted in the context of AI models and datasets. Here, we present the perspectives, vision, and experiences of researchers from different countries, disciplines, and backgrounds who are leading the definition and adoption of FAIR principles in their communities of practice, and discuss outcomes that may result from pursuing and incentivizing FAIR AI research. The material for this report builds on the FAIR for AI Workshop held at Argonne National Laboratory on June 7, 2022.
△ Less
Submitted 1 August, 2023; v1 submitted 30 September, 2022;
originally announced October 2022.
-
Exploring SMEFT operators in the tHq production at the LHC
Authors:
Monoranjan Guchait,
Arnab Roy
Abstract:
We study the top-quark production along with a Higgs boson and a jet (tHq) at the LHC experiment within the framework of the Standard Model Effective Field Theory (SMEFT). A strategy is developed to constrain the Wilson Coefficients (WC) corresponding to the associated SMEFT operators using the latest LHC measurements. The best-fit values of these WCs are presented. Finally, we demonstrate the fea…
▽ More
We study the top-quark production along with a Higgs boson and a jet (tHq) at the LHC experiment within the framework of the Standard Model Effective Field Theory (SMEFT). A strategy is developed to constrain the Wilson Coefficients (WC) corresponding to the associated SMEFT operators using the latest LHC measurements. The best-fit values of these WCs are presented. Finally, we demonstrate the feasibility of finding the effects of these operators on various kinematical observables of the tHq process at the LHC. We find that for a set of best-fitted values of the considered WCs, the excess of signal over the backgrounds can be achieved with a reasonable significance at the center of mass energy $\sqrt{s}=13$ TeV and for integrated luminosity options ${\cal L}=$300 $\rm fb^{-1}$ and 3000 $\rm fb^{-1}$.
△ Less
Submitted 28 September, 2023; v1 submitted 11 October, 2022;
originally announced October 2022.
-
A Detailed Study of Interpretability of Deep Neural Network based Top Taggers
Authors:
Ayush Khot,
Mark S. Neubauer,
Avik Roy
Abstract:
Recent developments in the methods of explainable AI (XAI) allow researchers to explore the inner workings of deep neural networks (DNNs), revealing crucial information about input-output relationships and realizing how data connects with machine learning models. In this paper we explore interpretability of DNN models designed to identify jets coming from top quark decay in high energy proton-prot…
▽ More
Recent developments in the methods of explainable AI (XAI) allow researchers to explore the inner workings of deep neural networks (DNNs), revealing crucial information about input-output relationships and realizing how data connects with machine learning models. In this paper we explore interpretability of DNN models designed to identify jets coming from top quark decay in high energy proton-proton collisions at the Large Hadron Collider (LHC). We review a subset of existing top tagger models and explore different quantitative methods to identify which features play the most important roles in identifying the top jets. We also investigate how and why feature importance varies across different XAI metrics, how correlations among features impact their explainability, and how latent space representations encode information as well as correlate with physically meaningful quantities. Our studies uncover some major pitfalls of existing XAI methods and illustrate how they can be overcome to obtain consistent and meaningful interpretation of these models. We additionally illustrate the activity of hidden layers as Neural Activation Pattern (NAP) diagrams and demonstrate how they can be used to understand how DNNs relay information across the layers and how this understanding can help to make such models significantly simpler by allowing effective model reoptimization and hyperparameter tuning. These studies not only facilitate a methodological approach to interpreting models but also unveil new insights about what these models learn. Incorporating these observations into augmented model design, we propose the Particle Flow Interaction Network (PFIN) model and demonstrate how interpretability-inspired model augmentation can improve top tagging performance.
△ Less
Submitted 5 July, 2023; v1 submitted 9 October, 2022;
originally announced October 2022.
-
Making Digital Objects FAIR in High Energy Physics: An Implementation for Universal FeynRules Output (UFO) Models
Authors:
Mark S. Neubauer,
Avik Roy,
Zijun Wang
Abstract:
Research in the data-intensive discipline of high energy physics (HEP) often relies on domain-specific digital contents. Reproducibility of research relies on proper preservation of these digital objects. This paper reflects on the interpretation of principles of Findability, Accessibility, Interoperability, and Reusability (FAIR) in such context and demonstrates its implementation by describing t…
▽ More
Research in the data-intensive discipline of high energy physics (HEP) often relies on domain-specific digital contents. Reproducibility of research relies on proper preservation of these digital objects. This paper reflects on the interpretation of principles of Findability, Accessibility, Interoperability, and Reusability (FAIR) in such context and demonstrates its implementation by describing the development of an end-to-end support infrastructure for preserving and accessing Universal FeynRules Output (UFO) models guided by the FAIR principles. UFO models are custom-made python libraries used by the HEP community for Monte Carlo simulation of collider physics events. Our framework provides simple but robust tools to preserve and access the UFO models and corresponding metadata in accordance with the FAIR principles.
△ Less
Submitted 15 March, 2023; v1 submitted 20 September, 2022;
originally announced September 2022.
-
Dynamics of Hot QCD Matter -- Current Status and Developments
Authors:
Santosh K. Das,
Prabhakar Palni,
Jhuma Sannigrahi,
Jan-e Alam,
Cho Win Aung,
Yoshini Bailung,
Debjani Banerjee,
Gergely Gábor Barnaföldi,
Subash Chandra Behera,
Partha Pratim Bhaduri,
Samapan Bhadury,
Rajesh Biswas,
Pritam Chakraborty,
Vinod Chandra,
Prottoy Das,
Sadhana Dash,
Saumen Datta,
Sudipan De,
Vaishnavi Desai,
Suman Deb,
Debarshi Dey,
Jayanta Dey,
Sabyasachi Ghosh,
Najmul Haque,
Mujeeb Hasan
, et al. (42 additional authors not shown)
Abstract:
The discovery and characterization of hot and dense QCD matter, known as Quark Gluon Plasma (QGP), remains the most international collaborative effort and synergy between theorists and experimentalists in modern nuclear physics to date. The experimentalists around the world not only collect an unprecedented amount of data in heavy-ion collisions, at Relativistic Heavy Ion Collider (RHIC), at Brook…
▽ More
The discovery and characterization of hot and dense QCD matter, known as Quark Gluon Plasma (QGP), remains the most international collaborative effort and synergy between theorists and experimentalists in modern nuclear physics to date. The experimentalists around the world not only collect an unprecedented amount of data in heavy-ion collisions, at Relativistic Heavy Ion Collider (RHIC), at Brookhaven National Laboratory (BNL) in New York, USA, and the Large Hadron Collider (LHC), at CERN in Geneva, Switzerland but also analyze these data to unravel the mystery of this new phase of matter that filled a few microseconds old universe, just after the Big Bang. In the meantime, advancements in theoretical works and computing capability extend our wisdom about the hot-dense QCD matter and its dynamics through mathematical equations. The exchange of ideas between experimentalists and theoreticians is crucial for the progress of our knowledge. The motivation of this first conference named "HOT QCD Matter 2022" is to bring the community together to have a discourse on this topic. In this article, there are 36 sections discussing various topics in the field of relativistic heavy-ion collisions and related phenomena that cover a snapshot of the current experimental observations and theoretical progress. This article begins with the theoretical overview of relativistic spin-hydrodynamics in the presence of the external magnetic field, followed by the Lattice QCD results on heavy quarks in QGP, and finally, it ends with an overview of experiment results.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Data Science and Machine Learning in Education
Authors:
Gabriele Benelli,
Thomas Y. Chen,
Javier Duarte,
Matthew Feickert,
Matthew Graham,
Lindsey Gray,
Dan Hackett,
Phil Harris,
Shih-Chieh Hsu,
Gregor Kasieczka,
Elham E. Khoda,
Matthias Komm,
Mia Liu,
Mark S. Neubauer,
Scarlet Norberg,
Alexx Perloff,
Marcel Rieger,
Claire Savard,
Kazuhiro Terao,
Savannah Thais,
Avik Roy,
Jean-Roch Vlimant,
Grigorios Chachamis
Abstract:
The growing role of data science (DS) and machine learning (ML) in high-energy physics (HEP) is well established and pertinent given the complex detectors, large data, sets and sophisticated analyses at the heart of HEP research. Moreover, exploiting symmetries inherent in physics data have inspired physics-informed ML as a vibrant sub-field of computer science research. HEP researchers benefit gr…
▽ More
The growing role of data science (DS) and machine learning (ML) in high-energy physics (HEP) is well established and pertinent given the complex detectors, large data, sets and sophisticated analyses at the heart of HEP research. Moreover, exploiting symmetries inherent in physics data have inspired physics-informed ML as a vibrant sub-field of computer science research. HEP researchers benefit greatly from materials widely available materials for use in education, training and workforce development. They are also contributing to these materials and providing software to DS/ML-related fields. Increasingly, physics departments are offering courses at the intersection of DS, ML and physics, often using curricula developed by HEP researchers and involving open software and data used in HEP. In this white paper, we explore synergies between HEP research and DS/ML education, discuss opportunities and challenges at this intersection, and propose community activities that will be mutually beneficial.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Explainable AI for High Energy Physics
Authors:
Mark S. Neubauer,
Avik Roy
Abstract:
Neural Networks are ubiquitous in high energy physics research. However, these highly nonlinear parameterized functions are treated as \textit{black boxes}- whose inner workings to convey information and build the desired input-output relationship are often intractable. Explainable AI (xAI) methods can be useful in determining a neural model's relationship with data toward making it \textit{interp…
▽ More
Neural Networks are ubiquitous in high energy physics research. However, these highly nonlinear parameterized functions are treated as \textit{black boxes}- whose inner workings to convey information and build the desired input-output relationship are often intractable. Explainable AI (xAI) methods can be useful in determining a neural model's relationship with data toward making it \textit{interpretable} by establishing a quantitative and tractable relationship between the input and the model's output. In this letter of interest, we explore the potential of using xAI methods in the context of problems in high energy physics.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Development of a water-based cooling system for the Muon Chamber detector system of the CBM experiment
Authors:
Sumit Kumar Kundu,
Saikat Biswas,
Subhasis Chattopadhyay,
Supriya Das,
Anand Kumar Dubey,
Chandrasekhar Ghosh,
Ajit Kumar,
Ankhi Roy,
Jogender Saini,
Susnata Seth,
Sidharth Kumar Prasad
Abstract:
A water-based cooling system is being investigated to meet the cooling requirement of the Gas Electron Multiplier (GEM) based Muon Chamber (MuCh) detector system of the Compressed Baryonic Matter (CBM) experiment at GSI, Germany. The system is based on circulating cold water through the channels inside an aluminium plate. The aluminium plate is attached to a GEM chamber. A feasibility study is con…
▽ More
A water-based cooling system is being investigated to meet the cooling requirement of the Gas Electron Multiplier (GEM) based Muon Chamber (MuCh) detector system of the Compressed Baryonic Matter (CBM) experiment at GSI, Germany. The system is based on circulating cold water through the channels inside an aluminium plate. The aluminium plate is attached to a GEM chamber. A feasibility study is conducted on one small and two real-size prototype cooling plates. A microcontroller based unit has been built and integrated into the system to achieve automatic control and monitoring of temperature on plate surface. The real-size prototypes have been used in a test beam experiment at the CERN SPS (Super Proton Synchrotron) with the lead beam on a lead target. A setup using three prototype modules has been prepared in the lab for testing in a simulated real life environment. This paper discusses the working principle, mechanical design, fabrication, and test results of the cooling prototypes in detail.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Snowmass 2021 CMB-S4 White Paper
Authors:
Kevork Abazajian,
Arwa Abdulghafour,
Graeme E. Addison,
Peter Adshead,
Zeeshan Ahmed,
Marco Ajello,
Daniel Akerib,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Mustafa A. Amin,
Mandana Amiri,
Adam Anderson,
Behzad Ansarinejad,
Melanie Archipley,
Kam S. Arnold,
Matt Ashby,
Han Aung,
Carlo Baccigalupi,
Carina Baker,
Abhishek Bakshi,
Debbie Bard,
Denis Barkats,
Darcy Barron,
Peter S. Barry
, et al. (331 additional authors not shown)
Abstract:
This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.
This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
Authors:
G. Aad,
A. V. Akimov,
K. Al Khoury,
M. Aleksa,
T. Andeen,
C. Anelli,
N. Aranzabal,
C. Armijo,
A. Bagulia,
J. Ban,
T. Barillari,
F. Bellachia,
M. Benoit,
F. Bernon,
A. Berthold,
H. Bervas,
D. Besin,
A. Betti,
Y. Bianga,
M. Biaut,
D. Boline,
J. Boudreau,
T. Bouedo,
N. Braam,
M. Cano Bret
, et al. (173 additional authors not shown)
Abstract:
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Cons…
▽ More
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system.
△ Less
Submitted 16 May, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
An array-oriented Python interface for FastJet
Authors:
Aryan Roy,
Jim Pivarski,
Chad Wells Freer
Abstract:
Analysis on HEP data is an iterative process in which the results of one step often inform the next. In an exploratory analysis, it is common to perform one computation on a collection of events, then view the results (often with histograms) to decide what to try next. Awkward Array is a Scikit-HEP Python package that enables data analysis with array-at-a-time operations to implement cuts as slice…
▽ More
Analysis on HEP data is an iterative process in which the results of one step often inform the next. In an exploratory analysis, it is common to perform one computation on a collection of events, then view the results (often with histograms) to decide what to try next. Awkward Array is a Scikit-HEP Python package that enables data analysis with array-at-a-time operations to implement cuts as slices, combinatorics as composable functions, etc. However, most C++ HEP libraries, such as FastJet, have an imperative, one-particle-at-a-time interface, which would be inefficient in Python and goes against the grain of the array-at-a-time logic of scientific Python. Therefore, we developed fastjet, a pip-installable Python package that provides FastJet C++ binaries, the classic (particle-at-a-time) Python interface, and the new array-oriented interface for use with Awkward Array.
The new interface streamlines interoperability with scientific Python software beyond HEP, such as machine learning. In one case, adopting this library along with other array-oriented tools accelerated HEP analysis code by a factor of 20. It was designed to be easily integrated with libraries in the Scikit-HEP ecosystem, including Uproot (file I/O), hist (histogramming), Vector (Lorentz vectors), and Coffea (high-level glue). We discuss the design of the fastjet Python library, integrating the classic interface with the array oriented interface and with the Vector library for Lorentz vector operations. The new interface was developed as open source.
△ Less
Submitted 8 February, 2022;
originally announced February 2022.
-
Non-resonant Diagrams for Single Production of Top and Bottom Partners
Authors:
Avik Roy,
Timothy Andeen
Abstract:
The search for Top and Bottom Partners is a major focus of analyses at both the ATLAS and CMS experiments. When singly produced, these vector-like partners of the Standard Model third generation quarks retain a sizeable cross-section that makes them attractive search candidates in their respective topologies. While most efforts have concentrated on the resonant mode for single production of these…
▽ More
The search for Top and Bottom Partners is a major focus of analyses at both the ATLAS and CMS experiments. When singly produced, these vector-like partners of the Standard Model third generation quarks retain a sizeable cross-section that makes them attractive search candidates in their respective topologies. While most efforts have concentrated on the resonant mode for single production of these hypothetical particles, the most dominant mode at narrow widths, recent studies have revealed a wide and rich phenomenology involving the non-resonant diagrams. In this letter we categorically investigate the impact of the non-resonant diagrams on different Top and Bottom partner single production topologies and their impact on the inclusive cross-section estimation. We also propose a parameterization for calculating the the correction factor to the single vector-like quark production cross-section when such diagrams are included.
△ Less
Submitted 10 February, 2022; v1 submitted 5 February, 2022;
originally announced February 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Differential Cross Sections for Neutron-Proton Scattering in the Region of the $d^*(2380)$ Dibaryon Resonance
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berłowski,
H. Bhatt,
M. Büscher,
H. Calén,
I. Ciepał,
H. Clement,
D. Coderre,
E. Czerwiński,
K. Demmich,
E. Doroshkevich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Föhl,
K. Fransson,
F. Goldenbaum,
P. Goslawski,
A. Goswami
, et al. (80 additional authors not shown)
Abstract:
Differential cross sections have been extracted from exclusive and kinematically complete high-statistics measurements of quasifree polarized $\vec{n}p$ scattering performed in the energy region of the $d^*(2380)$ dibaryon resonance covering the the range of beam energies $T_n$ = 0.98 - 1.29 GeV ($\sqrt s$ = 2.32 - 2.44 GeV). The experiment was carried out with the WASA-at-COSY setup having a pola…
▽ More
Differential cross sections have been extracted from exclusive and kinematically complete high-statistics measurements of quasifree polarized $\vec{n}p$ scattering performed in the energy region of the $d^*(2380)$ dibaryon resonance covering the the range of beam energies $T_n$ = 0.98 - 1.29 GeV ($\sqrt s$ = 2.32 - 2.44 GeV). The experiment was carried out with the WASA-at-COSY setup having a polarized deuteron beam im**ed on the hydrogen pellet target and utilizing the quasifree process $dp \to np + p_{spectator}$. That way the $np$ differential cross section $σ(Θ)$ was measured over a large angular range. The obtained angular distributions complement the corresponding analyzing power $A_y(Θ)$ measurements published previously. A SAID partial-wave analysis incorporating the new data strengthens the finding of a resonance pole in the coupled $^3D_3 - ^3G_3$ waves.
△ Less
Submitted 29 March, 2020;
originally announced March 2020.
-
Novel Interpretation Strategy for Searches of Singly Produced Vector-like Quarks at the LHC
Authors:
Avik Roy,
Nikiforos Nikiforou,
Nuno Castro,
Timothy Andeen
Abstract:
Vector-like Quarks (VLQs) are potential signatures of physics beyond the Standard Model at the TeV energy scale and major efforts have been put forward at both ATLAS and CMS experiments in search of these particles. In order to make these search results more relatable in the context of most plausible theories of VLQs, it is deemed important to present the analysis results in a general fashion. We…
▽ More
Vector-like Quarks (VLQs) are potential signatures of physics beyond the Standard Model at the TeV energy scale and major efforts have been put forward at both ATLAS and CMS experiments in search of these particles. In order to make these search results more relatable in the context of most plausible theories of VLQs, it is deemed important to present the analysis results in a general fashion. We investigate the challenges associated with such interpretations of singly produced VLQ searches and propose a generalized, semi-analytical framework that allows a model-independent casting of the results in terms of unconstrained, free parameters of the VLQ Lagrangian. We also propose a simple parameterization of the correction factor to the single VLQ production cross-section at large decay widths. We illustrate how the proposed framework can be used to conveniently represent statistical limits by numerically reinterpreting results from benchmark ATLAS and CMS analyses.
△ Less
Submitted 24 June, 2020; v1 submitted 1 March, 2020;
originally announced March 2020.
-
CMB-S4 Science Case, Reference Design, and Project Plan
Authors:
Kevork Abazajian,
Graeme Addison,
Peter Adshead,
Zeeshan Ahmed,
Steven W. Allen,
David Alonso,
Marcelo Alvarez,
Adam Anderson,
Kam S. Arnold,
Carlo Baccigalupi,
Kathy Bailey,
Denis Barkats,
Darcy Barron,
Peter S. Barry,
James G. Bartlett,
Ritoban Basu Thakur,
Nicholas Battaglia,
Eric Baxter,
Rachel Bean,
Chris Bebek,
Amy N. Bender,
Bradford A. Benson,
Edo Berger,
Sanah Bhimani,
Colin A. Bischoff
, et al. (200 additional authors not shown)
Abstract:
We present the science case, reference design, and project plan for the Stage-4 ground-based cosmic microwave background experiment CMB-S4.
We present the science case, reference design, and project plan for the Stage-4 ground-based cosmic microwave background experiment CMB-S4.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
An Isotensor Dibaryon in the $pp \to ppπ^+π^-$ Reaction?
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berłowski,
A. Bondar,
M. Büscher,
H. Calén,
I. Ciepał,
H. Clement,
E. Czerwiński,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Föhl,
K. Fransson,
F. Goldenbaum,
A. Goswami,
K. Grigoryev,
L. Heijkenskjöld,
V. Hejny
, et al. (59 additional authors not shown)
Abstract:
Exclusive measurements of the quasi-free $pp \to ppπ^+π^-$ reaction have been carried out at WASA@COSY by means of $pd$ collisions at $T_p$ = 1.2 GeV. Total and differential cross sections have been extracted covering the energy region $T_p = 1.08 - 1.36$ GeV, which is the region of $N^*(1440)$ and $Δ(1232)Δ(1232)$ resonance excitations. Calculations describing these excitations by $t$-channel mes…
▽ More
Exclusive measurements of the quasi-free $pp \to ppπ^+π^-$ reaction have been carried out at WASA@COSY by means of $pd$ collisions at $T_p$ = 1.2 GeV. Total and differential cross sections have been extracted covering the energy region $T_p = 1.08 - 1.36$ GeV, which is the region of $N^*(1440)$ and $Δ(1232)Δ(1232)$ resonance excitations. Calculations describing these excitations by $t$-channel meson exchange are at variance with the measured differential cross sections and underpredict substantially the experimental total cross section. An isotensor $ΔN$ dibaryon resonance with $I(J^P) = 2(1^+)$ produced associatedly with a pion is able to overcome these deficiencies.
△ Less
Submitted 27 June, 2018; v1 submitted 8 March, 2018;
originally announced March 2018.
-
On the Production of an Isotensor Dibaryon in the $pp \to ppπ^+π^-$ Reaction
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berłowski,
A. Bondar,
M. Büscher,
H. Calén,
I. Ciepał,
H. Clement,
E. Czerwiński,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Föhl,
K. Fransson,
F. Goldenbaum,
A. Goswami,
K. Grigoryev,
L. Heijkenskjöld,
V. Hejny
, et al. (59 additional authors not shown)
Abstract:
Exclusive measurements of the quasi-free $pp \to ppπ^+π^-$ reaction have been performed by means of $pd$ collisions at $T_p$ = 1.2 GeV using the WASA detector setup at COSY. Total and differential cross sections have been obtained covering the energy region $T_p = 1.08 - 1.36$ GeV ($\sqrt s$ = 2.35 - 2.46 GeV), which includes the regions of $N^*(1440)$ and $Δ(1232)Δ(1232)$ resonance excitations. C…
▽ More
Exclusive measurements of the quasi-free $pp \to ppπ^+π^-$ reaction have been performed by means of $pd$ collisions at $T_p$ = 1.2 GeV using the WASA detector setup at COSY. Total and differential cross sections have been obtained covering the energy region $T_p = 1.08 - 1.36$ GeV ($\sqrt s$ = 2.35 - 2.46 GeV), which includes the regions of $N^*(1440)$ and $Δ(1232)Δ(1232)$ resonance excitations. Calculations describing these excitations by $t$-channel meson exchange are at variance with experimental differential cross sections and underpredict substantially the measured total cross section. An isotensor $ΔN$ dibaryon resonance with $I(J^P) = 2(1^+)$ produced associatedly with a pion is able to overcome these deficiencies. Such a dibaryon was predicted by Dyson and Xuong and more recently calculated by Gal and Garcilazo.
△ Less
Submitted 10 August, 2018; v1 submitted 8 March, 2018;
originally announced March 2018.
-
Search for $C$ violation in the decay $η\rightarrowπ^0+e^++e^-$ with WASA-at-COSY
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berłowski,
A. Bondar,
M. Büscher,
H. Calén,
I. Ciepał,
H. Clement,
E. Czerwiński,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Föhl,
K. Fransson,
F. Goldenbaum,
A. Goswami,
K. Grigoryev,
C. -O. Gullström,
C. Hanhart
, et al. (68 additional authors not shown)
Abstract:
We report on the investigation of the rare decay $η\rightarrowπ^0+\text{e}^++\text{e}^-$ which is of interest to study both $C$ violation in the electromagnetic interaction and to search for contributions from physics beyond the Standard Model, since the allowed decay via a two-photon intermediate state is strongly suppressed. The experiment has been performed using the WASA-at-COSY installation,…
▽ More
We report on the investigation of the rare decay $η\rightarrowπ^0+\text{e}^++\text{e}^-$ which is of interest to study both $C$ violation in the electromagnetic interaction and to search for contributions from physics beyond the Standard Model, since the allowed decay via a two-photon intermediate state is strongly suppressed. The experiment has been performed using the WASA-at-COSY installation, located at the COSY accelerator of the Forschungszentrum Jülich, Germany. In total $3\times10^7$ events of the reaction $\text{p}+\text{d}\rightarrow{^3\text{He}}+η$ have been recorded at an excess energy of $Q = 59.8\,\textrm{MeV}$. Based on this data set the $C$ parity violating decay $η\rightarrowπ^0+γ^*\rightarrowπ^0+\textrm{e}^++\textrm{e}^-$ via a single-photon intermediate state has been searched for, resulting in new upper limits of $Γ\left(η\rightarrowπ^0+\textrm{e}^++\textrm{e}^-\right)/ Γ\left(η\rightarrowπ^++π^-+π^0\right) < 3.28\times10^{-5}$ and $Γ\left(η\rightarrowπ^0+\textrm{e}^++\textrm{e}^-\right)/ Γ\left(η\rightarrow\textrm{all}\right) < 7.5\times10^{-6}\ (\textrm{CL} = 90\,\%)$, respectively.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Exclusive photoproduction of $π^0$ up to large values of Mandelstam variables $s, t$ and $u$ with CLAS
Authors:
M. C. Kunkel,
32,
18 M. J. Amaryan,
32,
I. I. Strakovsky,
16 J. Ritman,
3,
18 G. R. Goldstein,
43 K. P. Adhikari,
28 S Adhikari,
13 H. Avakian,
39 J. Ball,
7 I. Balossino,
19 L. Barion,
19 M. Battaglieri,
21 V. Batourine,
39,
27 I. Bedlinskiy,
25 A. S. Biselli,
11,
5 S. Boiarinov,
39 W. J. Briscoe,
16 W. K. Brooks,
40,
39 S. Bueltmann
, et al. (147 additional authors not shown)
Abstract:
Exclusive photoproduction cross sections have been measured for the process $γp \rightarrow pπ^0(e^+e^-(γ))$ with the Dalitz decay final state using tagged photon energies in the range of $E_γ = 1.275-5.425$ GeV. The complete angular distribution of the final state $π^0$, for the entire photon energy range up to large values of $t$ and $u$, has been measured for the first time. The data obtained s…
▽ More
Exclusive photoproduction cross sections have been measured for the process $γp \rightarrow pπ^0(e^+e^-(γ))$ with the Dalitz decay final state using tagged photon energies in the range of $E_γ = 1.275-5.425$ GeV. The complete angular distribution of the final state $π^0$, for the entire photon energy range up to large values of $t$ and $u$, has been measured for the first time. The data obtained show that the cross section $dσ/dt$, at mid to large angles, decreases with energy as $s^{-6.89\pm 0.26} $. This is in agreement with the perturbative QCD quark counting rule prediction of $s^{-7} $. Paradoxically, the size of angular distribution of measured cross sections is greatly underestimated by the QCD based Generalized Parton Distribution mechanism at highest available invariant energy $s=11$ GeV$^2$. At the same time, the Regge exchange based models for $π^0$ photoproduction are more consistent with experimental data.
△ Less
Submitted 29 December, 2017;
originally announced December 2017.
-
Spin dependence of η meson production in proton-proton collisions close to threshold
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
S. D. Bass,
F. S. Bergmann,
M. Berlowski,
A. Bondar,
M. Buscher,
H. Calen,
I. Ciepal,
H. Clement,
E. Czerwinski,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Fohl,
K. Fransson,
F. Goldenbaum,
A. Goswami,
K. Grigoryev,
K. Grigoryev
, et al. (67 additional authors not shown)
Abstract:
Taking advantage of the high acceptance and axial symmetry of the WASA-at-COSY detector, and the high degree of the polarized proton beam of COSY, the reaction pp{\to} ppη has been measured close to threshold to explore the analyzing power Ay. The angular distribution of Ay is determined with the precision improved by more than one order of magnitude with respect to previous results allowing a fir…
▽ More
Taking advantage of the high acceptance and axial symmetry of the WASA-at-COSY detector, and the high degree of the polarized proton beam of COSY, the reaction pp{\to} ppη has been measured close to threshold to explore the analyzing power Ay. The angular distribution of Ay is determined with the precision improved by more than one order of magnitude with respect to previous results allowing a first accurate comparison with theoretical predictions. The determined analyzing power is consistent with zero for an excess energy of Q = 15 MeV signaling s wave production with no evidence for higher partial waves. At Q = 72 MeV the data reveals strong interference of P s and P p partial waves and cancellation of (P p) and Ss*Sd contributions. These results rule out the presently available theoretical predictions for the production mechanism of the η meson.
△ Less
Submitted 28 November, 2017; v1 submitted 13 September, 2017;
originally announced September 2017.
-
Simulation study of energy resolution, position resolution and $π^0$-$γ$ separation of a sampling electromagnetic calorimeter at high energies
Authors:
Ashim Roy,
Shilpi Jain,
Sunanda Banerjee,
Satyaki Bhattacharya,
Gobinda Majumder
Abstract:
A simulation study of energy resolution, position resolution, and $π^0$-$γ$ separation using multivariate methods of a sampling calorimeter is presented. As a realistic example, the geometry of the calorimeter is taken from the design geometry of the Shashlik calorimeter which was considered as a candidate for CMS endcap for the phase II of LHC running. The methods proposed in this paper can be ea…
▽ More
A simulation study of energy resolution, position resolution, and $π^0$-$γ$ separation using multivariate methods of a sampling calorimeter is presented. As a realistic example, the geometry of the calorimeter is taken from the design geometry of the Shashlik calorimeter which was considered as a candidate for CMS endcap for the phase II of LHC running. The methods proposed in this paper can be easily adapted to various geometrical layouts of a sampling calorimeter. Energy resolution is studied for different layouts and different absorber-scintillator combinations of the Shashlik detector. It is shown that a boosted decision tree using fine grained information of the calorimeter can perform three times better than a cut-based method for separation of $π^0$ from $γ$ over a large energy range of 20 GeV-200 GeV.
△ Less
Submitted 21 June, 2017; v1 submitted 15 March, 2017;
originally announced March 2017.
-
Isoscalar Single-Pion Production in the Region of Roper and $d^*(2380)$ Resonances
Authors:
WASA-at-COSY Collaboration,
:,
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berłowski,
H. Bhatt,
A. Bondar,
M. Büscher,
H. Calen,
I. Ciepał,
H. Clement,
E. Czerwinski,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Föhl,
K. Fransson,
F. Goldenbaum,
A. Goswami K. Grigoryev
, et al. (69 additional authors not shown)
Abstract:
Exclusive measurements of the quasi-free $pn \to ppπ^-$ and $pp \to ppπ^0$ reactions have been performed by means of $pd$ collisions at $T_p$ = 1.2 GeV using the WASA detector setup at COSY. Total and differential cross sections have been obtained covering the energy region $T_p = 0.95 - 1.3$ GeV ($\sqrt s$ = 2.3 - 2.46 GeV), which includes the regions of $Δ(1232)$, $N^*(1440)$ and $d^*(2380)$ res…
▽ More
Exclusive measurements of the quasi-free $pn \to ppπ^-$ and $pp \to ppπ^0$ reactions have been performed by means of $pd$ collisions at $T_p$ = 1.2 GeV using the WASA detector setup at COSY. Total and differential cross sections have been obtained covering the energy region $T_p = 0.95 - 1.3$ GeV ($\sqrt s$ = 2.3 - 2.46 GeV), which includes the regions of $Δ(1232)$, $N^*(1440)$ and $d^*(2380)$ resonance excitations. From these measurements the isoscalar single-pion production has been extracted, for which data existed so far only below $T_p$ = 1 GeV. We observe a substantial increase of this cross section above 1 GeV, which can be related to the Roper resonance $N^*(1440)$, the strength of which shows up isolated from the $Δ$ resonance in the isoscalar $(Nπ)_{I=0}$ invariant-mass spectrum. No evidence for a decay of the dibaryon resonance $d^*(2380)$ into the isoscalar $(NNπ)_{I=0}$ channel is found. An upper limit of 90 $μ$b (90 $\%$ C.L.) corresponding to a branching ratio of 5 $\%$ has been deduced.
△ Less
Submitted 9 June, 2020; v1 submitted 23 February, 2017;
originally announced February 2017.
-
Feasibility study for the measurement of $πN$ TDAs at PANDA in $\bar{p}p\to J/ψπ^0$
Authors:
PANDA Collaboration,
B. Singh,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
M. Fink,
F. H. Heinsius,
T. Held,
T. Holtmann,
S. Jasper,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann,
M. Kümmel,
S. Leiber
, et al. (488 additional authors not shown)
Abstract:
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as…
▽ More
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the $\bar{p}p\toπ^+π^-π^0$ and $\bar{p}p\to J/ψπ^0π^0$ reactions are performed with PandaRoot, the simulation and analysis software framework of the PANDA experiment. It is shown that the measurement can be done at PANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity.
△ Less
Submitted 7 October, 2016;
originally announced October 2016.
-
Search for an Isospin I =3 Dibaryon
Authors:
P. Adlarson,
W. Augustyniak,
W. Bardan,
M. Bashkanov,
F. S. Bergmann,
M. Berlowski,
H. Bhatt,
A. Bondar,
M. Buescher,
H. Calen,
I. Ciepa,
H. Clement,
E. Czerwinski,
K. Demmich,
R. Engels,
A. Erven,
W. Erven,
W. Eyrich,
P. Fedorets,
K. Foehl,
K. Fransson,
F. Goldenbaum,
A. Goswami,
K. Grigoryev,
C. -O. Gullstroem
, et al. (69 additional authors not shown)
Abstract:
Various theoretical calculations based on QCD or hadronic interactions predict that in addition to the recently observed dibaryon resonance $d^*(2380)$ with $I(J^P) = 0(3^+)$ there should also exist a dibaryon resonance with mirrored quantum numbers $I(J^P) = 3(0^+)$. We report here on a search for such a $NN$-decoupled state in data on the $pp \to ppπ^+π^+π^-π^-$ reaction. Since no clear-cut evid…
▽ More
Various theoretical calculations based on QCD or hadronic interactions predict that in addition to the recently observed dibaryon resonance $d^*(2380)$ with $I(J^P) = 0(3^+)$ there should also exist a dibaryon resonance with mirrored quantum numbers $I(J^P) = 3(0^+)$. We report here on a search for such a $NN$-decoupled state in data on the $pp \to ppπ^+π^+π^-π^-$ reaction. Since no clear-cut evidence has been found, we give upper limits for the production cross section of such a resonance in the mass range 2280 - 2500 MeV.
△ Less
Submitted 4 October, 2016; v1 submitted 9 June, 2016;
originally announced June 2016.
-
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR
Authors:
PANDA Collaboration,
B. Singh,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
B. Liu,
H. Liu,
Z. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
M. Fink,
F. Heinsius,
T. Held,
T. Holtmann,
S. Jasper,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann,
M. Kümmel,
S. Leiber
, et al. (482 additional authors not shown)
Abstract:
Simulation results for future measurements of electromagnetic proton form factors at \PANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel $\bar p p \to e^+ e^-$ is studied on the basis of two different but consistent procedures. The suppression of the main background chann…
▽ More
Simulation results for future measurements of electromagnetic proton form factors at \PANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel $\bar p p \to e^+ e^-$ is studied on the basis of two different but consistent procedures. The suppression of the main background channel, $\textit{i.e.}$ $\bar p p \to π^+ π^-$, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. However, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.
△ Less
Submitted 29 September, 2016; v1 submitted 3 June, 2016;
originally announced June 2016.
-
Long Term Performance Studies of Large Oil-Free Bakelite Resistive Plate Chamber
Authors:
Rajesh Ganai,
Arindam Roy,
Mehul Kumar Shiroya,
Kshitij Agarwal,
Zubayer Ahammed,
Subikash Choudhury,
Subhasis Chattopadhyay
Abstract:
Several high energy physics and neutrino physics experiments worldwide require large-size RPCs to cover wide acceptances. The muon tracking systems in the Iron calorimeter (ICAL) in the INO experiment, India and the near detector in DUNE at Fermilab are two such examples. A (240 cm $\times$ 120 cm $\times$ 0.2 cm) bakelite RPC has been built and tested at Variable Energy Cyclotron Centre, Kolkata,…
▽ More
Several high energy physics and neutrino physics experiments worldwide require large-size RPCs to cover wide acceptances. The muon tracking systems in the Iron calorimeter (ICAL) in the INO experiment, India and the near detector in DUNE at Fermilab are two such examples. A (240 cm $\times$ 120 cm $\times$ 0.2 cm) bakelite RPC has been built and tested at Variable Energy Cyclotron Centre, Kolkata, using indigenous materials procured from the local market. No additional lubricant, like oil has been used on the electrode surfaces for smoothening. The chamber is in operation for $>$ 365 days. We have tested the chamber for its long term operation. The leakage current, bulk resistivity, efficiency, noise rate and time resolution of the chamber have been found to be quite stable during the testing peroid. It showed an efficiency $>$ 95$\%$ with an average time resolution of $\sim$0.83 ns at the point of measurement at 9000 V throughout the testing period. Details of the long term performance of the chamber have been discussed.
△ Less
Submitted 15 April, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
Study of Performance of Bakelite Resistive Plate Chamber (RPC)
Authors:
R. Ganai,
K. Agarwal,
A. Roy,
B. Muduli,
S. Chattopadhyay,
Z. Ahammed,
G. Das,
S. Ramnarayan
Abstract:
Resistive Plate Chamber (RPC) is a type of gaseous detector having excellent time and position resolutions. VECC is involved in the R\&D of indigenously developed bakelite RPCs. The largest size of bakelite RPC developed in India is 100 cm $\times$ 100 cm. We present here the test results of a bakelite sample along with the cosmic ray test results of a bakelite RPC (30 cm $\times$ 30 cm $\times$ 0…
▽ More
Resistive Plate Chamber (RPC) is a type of gaseous detector having excellent time and position resolutions. VECC is involved in the R\&D of indigenously developed bakelite RPCs. The largest size of bakelite RPC developed in India is 100 cm $\times$ 100 cm. We present here the test results of a bakelite sample along with the cosmic ray test results of a bakelite RPC (30 cm $\times$ 30 cm $\times$ 0.2cm) fabricated at VECC. The steps taken towards the development of a large size (240 cm $\times$ 120 cm $\times$ 0.2 cm) bakelite RPC have also been discussed.
△ Less
Submitted 14 March, 2016;
originally announced March 2016.
-
Measurement of the transverse single-spin asymmetry in $p^\uparrow+p \to W^{\pm}/Z^0$ at RHIC
Authors:
STAR Collaboration,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
A. Attri,
G. S. Averichev,
X. Bai,
V. Bairathi,
A. Banerjee,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
J. Bouchet,
J. D. Brandenburg
, et al. (312 additional authors not shown)
Abstract:
We present the measurement of the transverse single-spin asymmetry of weak boson production in transversely polarized proton-proton collisions at $\sqrt{s} = 500~\text{GeV}$ by the STAR experiment at RHIC. The measured observable is sensitive to the Sivers function, one of the transverse momentum dependent parton distribution functions, which is predicted to have the opposite sign in proton-proton…
▽ More
We present the measurement of the transverse single-spin asymmetry of weak boson production in transversely polarized proton-proton collisions at $\sqrt{s} = 500~\text{GeV}$ by the STAR experiment at RHIC. The measured observable is sensitive to the Sivers function, one of the transverse momentum dependent parton distribution functions, which is predicted to have the opposite sign in proton-proton collisions from that observed in deep inelastic lepton-proton scattering. These data provide the first experimental investigation of the non-universality of the Sivers function, fundamental to our understanding of QCD.
△ Less
Submitted 19 February, 2016; v1 submitted 18 November, 2015;
originally announced November 2015.
-
Fabrication and Characterisation of Oil-Free Large High Pressure Laminate Resistive Plate Chamber
Authors:
Rajesh Ganai,
Arindam Roy,
Kshitij Agarwal,
Zubayer Ahammed,
Subikash Choudhury,
Subhasis Chattopadhyay
Abstract:
A large (240 cm $\times$ 120 cm $\times$ 0.2 cm) oil-free High Pressure Laminate (HPL), commonly referred as "bakelite", Resistive Plate Chamber (RPC) has been developed at VECC-Kolkata using locally available P-302 OLTC grade HPL. The chamber has been operated in streamer mode using Argon, Freon(R134a) and Iso-butane in a ratio of 34:57:9 by volume. The electrodes and glue samples have been chara…
▽ More
A large (240 cm $\times$ 120 cm $\times$ 0.2 cm) oil-free High Pressure Laminate (HPL), commonly referred as "bakelite", Resistive Plate Chamber (RPC) has been developed at VECC-Kolkata using locally available P-302 OLTC grade HPL. The chamber has been operated in streamer mode using Argon, Freon(R134a) and Iso-butane in a ratio of 34:57:9 by volume. The electrodes and glue samples have been characterised by measuring their electrical parameters like bulk resistivity and surface resistivity. The performance of the chamber has been studied by measuring the efficiency, its uniformity and stability in detection of cosmic muons. Timing measurement has been performed at a central location of the chamber. The chamber showed an efficiency $>$95$\%$ and time resolution ($σ$), at the point of measurement, $\sim$0.83 ns at 9000V. Details of the material characterisation, fabrication procedure and performance studies have been discussed.
△ Less
Submitted 22 April, 2016; v1 submitted 7 October, 2015;
originally announced October 2015.
-
Photoproduction of ω Mesons off the Proton
Authors:
A. Wilson,
V. Crede,
A. V. Anisovich,
J. C. S. Bacelar,
B. Bantes,
O. Bartholomy,
D. Bayadilov,
R. Beck,
Y. A. Beloglazov,
K. T. Brinkmann,
R. Castelijns,
H. Dutz,
D. Elsner,
R. Ewald,
F. Frommberger,
M. Fuchs,
Chr. Funke,
R. Gregor,
A. Gridnev,
E. Gutz,
J. Hannappel,
W. Hillert,
P. Hoffmeister,
I. Horn,
I. Jaegle
, et al. (40 additional authors not shown)
Abstract:
The differential cross sections and unpolarized spin-density matrix elements for the reaction $γp\to pω$ were measured using the CBELSA/TAPS experiment for initial photon energies ranging from the reaction threshold to 2.5 GeV. These observables were measured from the radiative decay of the $ω$ meson, $ω\toπ^0γ$. The cross sections cover the full angular range and show the full extent of the $t$-c…
▽ More
The differential cross sections and unpolarized spin-density matrix elements for the reaction $γp\to pω$ were measured using the CBELSA/TAPS experiment for initial photon energies ranging from the reaction threshold to 2.5 GeV. These observables were measured from the radiative decay of the $ω$ meson, $ω\toπ^0γ$. The cross sections cover the full angular range and show the full extent of the $t$-channel forward rise. The overall shape of the angular distributions in the differential cross sections and unpolarized spin-density matrix elements are in fair agreement with previous data. In addition, for the first time, a beam of linearly-polarized tagged photons in the energy range from 1150 MeV to 1650 MeV was used to extract polarized spin-density matrix elements.
These data were included in the Bonn-Gatchina partial wave analysis (PWA). The dominant contribution to $ω$ photoproduction near threshold was found to be the $3/2^+$ partial wave, which is primarily due to the sub-threshold $N(1720)\,3/2^+$ resonance. At higher energies, pomeron-exchange was found to dominate whereas $π$-exchange remained small. These $t$-channel contributions as well as further contributions from nucleon resonances were necessary to describe the entire dataset: the $1/2^-$, $3/2^-$, and $5/2^+$ partial waves were also found to contribute significantly.
△ Less
Submitted 6 August, 2015;
originally announced August 2015.
-
Centrality and transverse momentum dependence of elliptic flow of multi-strange hadrons and $φ$ meson in Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV
Authors:
STAR Collaboration,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
X. Bai,
V. Bairathi,
A. Banerjee,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
J. Bouchet,
A. V. Brandin,
I. Bunzarov
, et al. (311 additional authors not shown)
Abstract:
We present high precision measurements of elliptic flow near midrapidity ($|y|<1.0$) for multi-strange hadrons and $φ$ meson as a function of centrality and transverse momentum in Au+Au collisions at center of mass energy $\sqrt{s_{NN}}=$ 200 GeV. We observe that the transverse momentum dependence of $φ$ and $Ω$ $v_{2}$ is similar to that of $π$ and $p$, respectively, which may indicate that the h…
▽ More
We present high precision measurements of elliptic flow near midrapidity ($|y|<1.0$) for multi-strange hadrons and $φ$ meson as a function of centrality and transverse momentum in Au+Au collisions at center of mass energy $\sqrt{s_{NN}}=$ 200 GeV. We observe that the transverse momentum dependence of $φ$ and $Ω$ $v_{2}$ is similar to that of $π$ and $p$, respectively, which may indicate that the heavier strange quark flows as strongly as the lighter up and down quarks. This observation constitutes a clear piece of evidence for the development of partonic collectivity in heavy-ion collisions at the top RHIC energy. Number of constituent quark scaling is found to hold within statistical uncertainty for both 0-30$\%$ and 30-80$\%$ collision centrality. There is an indication of the breakdown of previously observed mass ordering between $φ$ and proton $v_{2}$ at low transverse momentum in the 0-30$\%$ centrality range, possibly indicating late hadronic interactions affecting the proton $v_{2}$.
△ Less
Submitted 13 January, 2016; v1 submitted 19 July, 2015;
originally announced July 2015.
-
Measurements of Dielectron Production in Au$+$Au Collisions at $\sqrt{s_{\rm NN}}$ = 200 GeV from the STAR Experiment
Authors:
STAR Collaboration,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
J. Alford,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
A. Banerjee,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
J. Bouchet,
A. V. Brandin,
I. Bunzarov,
T. P. Burton
, et al. (308 additional authors not shown)
Abstract:
We report on measurements of dielectron ($e^+e^-$) production in Au$+$Au collisions at a center-of-mass energy of 200 GeV per nucleon-nucleon pair using the STAR detector at RHIC. Systematic measurements of the dielectron yield as a function of transverse momentum ($p_{\rm T}$) and collision centrality show an enhancement compared to a cocktail simulation of hadronic sources in the low invariant-m…
▽ More
We report on measurements of dielectron ($e^+e^-$) production in Au$+$Au collisions at a center-of-mass energy of 200 GeV per nucleon-nucleon pair using the STAR detector at RHIC. Systematic measurements of the dielectron yield as a function of transverse momentum ($p_{\rm T}$) and collision centrality show an enhancement compared to a cocktail simulation of hadronic sources in the low invariant-mass region ($M_{ee}<$ 1 GeV/$c^2$). This enhancement cannot be reproduced by the $ρ$-meson vacuum spectral function. In minimum-bias collisions, in the invariant-mass range of 0.30 $-$ 0.76 GeV/$c^2$, integrated over the full $p_{\rm T}$ acceptance, the enhancement factor is 1.76 $\pm$ 0.06 (stat.) $\pm$ 0.26 (sys.) $\pm$ 0.29 (cocktail). The enhancement factor exhibits weak centrality and $p_{\rm T}$ dependence in STAR's accessible kinematic regions, while the excess yield in this invariant-mass region as a function of the number of participating nucleons follows a power-law shape with a power of 1.44 $\pm$ 0.10. Models that assume an in-medium broadening of the $ρ$ meson spectral function consistently describe the observed excess in these measurements. Additionally, we report on measurements of $ω$ and $φ$-meson production through their $e^+e^-$ decay channel. These measurements show good agreement with Tsallis Blast-Wave model predictions as well as, in the case of the $φ$-meson, results through its $K^+K^-$ decay channel. In the intermediate invariant-mass region (1.1$<M_{ee}<$ 3 GeV/$c^2$), we investigate the spectral shapes from different collision centralities. Physics implications for possible in-medium modification of charmed hadron production and other physics sources are discussed.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Observation of Transverse Spin-Dependent Azimuthal Correlations of Charged Pion Pairs in $p^\uparrow+p$ at $\sqrt{s}=200$ GeV
Authors:
STAR Collaboration,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
J. Alford,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
A. Banerjee,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
J. Bouchet,
A. V. Brandin,
I. Bunzarov,
T. P. Burton
, et al. (308 additional authors not shown)
Abstract:
We report the observation of transverse polarization-dependent azimuthal correlations in charged pion pair production with the STAR experiment in $p^\uparrow+p$ collisions at RHIC. These correlations directly probe quark transversity distributions. We measure signals in excess of five standard deviations at high transverse momenta, at high pseudorapidities eta>0.5, and for pair masses around the m…
▽ More
We report the observation of transverse polarization-dependent azimuthal correlations in charged pion pair production with the STAR experiment in $p^\uparrow+p$ collisions at RHIC. These correlations directly probe quark transversity distributions. We measure signals in excess of five standard deviations at high transverse momenta, at high pseudorapidities eta>0.5, and for pair masses around the mass of the rho-meson. This is the first direct transversity measurement in p+p collisions. Comparing the results to data from lepton-nucleon scattering will test the universality of these spin-dependent quantities.
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
Energy dependence of acceptance-corrected dielectron excess mass spectrum at mid-rapidity in Au+Au collisions at $\sqrt{s_{NN}} = 19.6$ and 200 GeV
Authors:
STAR Collaboration,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
J. Alford,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
A. Banerjee,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
J. Bouchet,
A. V. Brandin,
I. Bunzarov,
T. P. Burton
, et al. (312 additional authors not shown)
Abstract:
The acceptance-corrected dielectron excess mass spectra, where the known hadronic sources have been subtracted from the inclusive dielectron mass spectra, are reported for the first time at mid-rapidity $|y_{ee}|<1$ in minimum-bias Au+Au collisions at $\sqrt{s_{NN}}$ = 19.6 and 200 GeV. The excess mass spectra are consistently described by a model calculation with a broadened $ρ$ spectral function…
▽ More
The acceptance-corrected dielectron excess mass spectra, where the known hadronic sources have been subtracted from the inclusive dielectron mass spectra, are reported for the first time at mid-rapidity $|y_{ee}|<1$ in minimum-bias Au+Au collisions at $\sqrt{s_{NN}}$ = 19.6 and 200 GeV. The excess mass spectra are consistently described by a model calculation with a broadened $ρ$ spectral function for $M_{ee}<1.1$ GeV/$c^{2}$. The integrated dielectron excess yield at $\sqrt{s_{NN}}$ = 19.6 GeV for $0.4<M_{ee}<0.75$ GeV/$c^2$, normalized to the charged particle multiplicity at mid-rapidity, has a value similar to that in In+In collisions at $\sqrt{s_{NN}}$ = 17.3 GeV. For $\sqrt{s_{NN}}$ = 200 GeV, the normalized excess yield in central collisions is higher than that at $\sqrt{s_{NN}}$ = 17.3 GeV and increases from peripheral to central collisions. These measurements indicate that the lifetime of the hot, dense medium created in central Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV is longer than those in peripheral collisions and at lower energies.
△ Less
Submitted 24 September, 2015; v1 submitted 21 January, 2015;
originally announced January 2015.
-
Neutron-Antineutron Oscillations: Theoretical Status and Experimental Prospects
Authors:
D. G. Phillips II,
W. M. Snow,
K. Babu,
S. Banerjee,
D. V. Baxter,
Z. Berezhiani,
M. Bergevin,
S. Bhattacharya,
G. Brooijmans,
L. Castellanos,
M-C. Chen,
C. E. Coppola,
R. Cowsik,
J. A. Crabtree,
P. Das,
E. B. Dees,
A. Dolgov,
P. D. Ferguson,
M. Frost,
T. Gabriel,
A. Gal,
F. Gallmeier,
K. Ganezer,
E. Golubeva,
G. Greene
, et al. (38 additional authors not shown)
Abstract:
This paper summarizes the relevant theoretical developments, outlines some ideas to improve experimental searches for free neutron-antineutron oscillations, and suggests avenues for future improvement in the experimental sensitivity.
This paper summarizes the relevant theoretical developments, outlines some ideas to improve experimental searches for free neutron-antineutron oscillations, and suggests avenues for future improvement in the experimental sensitivity.
△ Less
Submitted 18 October, 2015; v1 submitted 4 October, 2014;
originally announced October 2014.