Showing 1–33 of 33 results for author: Irles, A

Probing gauge-Higgs Unification models at the ILC with quark-antiquark forward-backward asymmetry at center-of-mass energies above the Z mass

Authors: A. Irles, J. P. Márquez, R. Pöschl, F. Richard, A. Saibel, H. Yamamoto, N. Yamatsu

Abstract: The International Linear Collider (ILC) will allow the precise study of $e^{-}e^{+}\rightarrow q\bar{q}$ interactions at different center-of-mass energies from the $Z$-pole to 1 TeV. In this paper, we discuss the experimental prospects for measuring differential observables in $e^{-}e^{+}\rightarrow b\bar{b}$ and $e^{-}e^{+}\rightarrow c\bar{c}$ at the ILC baseline energies, 250 and 500 GeV. The s… ▽ More The International Linear Collider (ILC) will allow the precise study of $e^{-}e^{+}\rightarrow q\bar{q}$ interactions at different center-of-mass energies from the $Z$-pole to 1 TeV. In this paper, we discuss the experimental prospects for measuring differential observables in $e^{-}e^{+}\rightarrow b\bar{b}$ and $e^{-}e^{+}\rightarrow c\bar{c}$ at the ILC baseline energies, 250 and 500 GeV. The study is based on full simulation and reconstruction of the International Large Detector (ILD) concept. Two gauge-Higgs unification models predicting new high-mass resonances beyond the Standard Model are discussed. These models predict sizable deviations of the forward-backward observables at the ILC running above the $Z$ mass and with longitudinally polarized electron and positron beams. The ability of the ILC to probe these models via high-precision measurements of the forward-backward asymmetry is discussed. Alternative scenarios at other energies and beam polarization schemes are also discussed, extrapolating the estimated uncertainties from the two baseline scenarios. △ Less

Submitted 31 May, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Report number: ILD-PHYS-2024-001

Journal ref: Eur. Phys. J. C 84, 537 (2024)

Focus topics for the ECFA study on Higgs / Top / EW factories

Authors: Jorge de Blas, Patrick Koppenburg, Jenny List, Fabio Maltoni, Juan Alcaraz Maestre, Juliette Alimena, John Alison, Patrizia Azzi, Paolo Azzurri, Emanuele Bagnaschi, Timothy Barklow, Matthew J. Basso, Josh Bendavid, Martin Beneke, Eli Ben-Haim, Mikael Berggren, Marzia Bordone, Ivanka Bozovic, Valentina Cairo, Nuno Filipe Castro, Marina Cobal, Paula Collins, Mogens Dam, Valerio Dao, Matteo Defranchis , et al. (83 additional authors not shown)

Abstract: In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. △ Less

Submitted 18 January, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Comments: v3: fixed spelling of two authors

Exploring hidden sectors with two-particle angular correlations at future $e^{+}e^{-}$ colliders

Authors: E. Musumeci, A. Irles, R. Perez-Ramos, I. Corredoira, E. Sarkisyan-Grinbaum, V. A. Mitsou, M. A. Sanchis-Lozano

Abstract: Future $e^+e^-$ colliders are called to play a fundamental role in measuring Standard Model (SM) parameters with unprecedented precision and the discovery of physics beyond the SM (BSM). This study focus on a QCD-like Hidden Valley (HV) scenario, with relatively light v-quarks ($\lesssim 100$ GeV), perturbing the QCD partonic cascade and increasing azimuthal and (pseudo)rapidity correlations of fi… ▽ More Future $e^+e^-$ colliders are called to play a fundamental role in measuring Standard Model (SM) parameters with unprecedented precision and the discovery of physics beyond the SM (BSM). This study focus on a QCD-like Hidden Valley (HV) scenario, with relatively light v-quarks ($\lesssim 100$ GeV), perturbing the QCD partonic cascade and increasing azimuthal and (pseudo)rapidity correlations of final-state SM hadrons. Using Pythia8 and detector fast simulation tools we study $ridge$-$like$ structures arising in the two-particle angular correlation function, including selection cuts and detector effects. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: To be submitted to PRL

Report number: IFIC/23-50

Technical Design Report for the LUXE Experiment

Authors: H. Abramowicz, M. Almanza Soto, M. Altarelli, R. Aßmann, A. Athanassiadis, G. Avoni, T. Behnke, M. Benettoni, Y. Benhammou, J. Bhatt, T. Blackburn, C. Blanch, S. Bonaldo, S. Boogert, O. Borysov, M. Borysova, V. Boudry, D. Breton, R. Brinkmann, M. Bruschi, F. Burkart, K. Büßer, N. Cavanagh, F. Dal Corso, W. Decking , et al. (109 additional authors not shown)

Abstract: This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger fiel… ▽ More This Technical Design Report presents a detailed description of all aspects of the LUXE (Laser Und XFEL Experiment), an experiment that will combine the high-quality and high-energy electron beam of the European XFEL with a high-intensity laser, to explore the uncharted terrain of strong-field quantum electrodynamics characterised by both high energy and high intensity, reaching the Schwinger field and beyond. The further implications for the search of physics beyond the Standard Model are also discussed. △ Less

Submitted 2 August, 2023; v1 submitted 1 August, 2023; originally announced August 2023.

Probing non-perturbative QED and new physics with a LUXE-type experiment at the ILC

Authors: A. Irles

Abstract: The proposed LUXE experiment (LASER Und XFEL Experiment) at DESY, Hamburg, using the 16.5 GeV electron beam from the European XFEL, aims to probe QED in the non-perturbative regime created in collisions between high-intensity laser pulses and high-energy electron or photon beams. In this strong-field regime, where the electromagnetic field of the laser is above the Schwinger limit, physical electr… ▽ More The proposed LUXE experiment (LASER Und XFEL Experiment) at DESY, Hamburg, using the 16.5 GeV electron beam from the European XFEL, aims to probe QED in the non-perturbative regime created in collisions between high-intensity laser pulses and high-energy electron or photon beams. In this strong-field regime, where the electromagnetic field of the laser is above the Schwinger limit, physical electron-positron pairs will be created from the QED vacuum, similar to Hawking radiation from black holes. LUXE intends to measure the positron production rate in an unprecedented intensity regime, in and beyond the regime expected in the beam-beam interaction of future electron-positron colliders. This setup also provides a unique opportunity to probe physics beyond the standard model by leveraging the large photon flux generated at LUXE, probing axion-like particles (ALPs) at a reach comparable to FASER2 and NA62. In this contribution, we will give an overview of the LUXE experimental setup and its challenges and explore the sensitivity of a LUXE-type experiment using the ILC$'$s or another future Higgs factory$'$s electron beam instead of the EU.XFEL one. △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.3

Report number: LUXE-PROC-2023-003, IFIC/23-35

Experimental prospects for precision observables in $e^{-}e^{+}\rightarrow q\bar{q}$ with $q=b,c$ processes at the ILC operating at 250 and 500 GeV of center of mass

Authors: A. Irles, J. P. Marquez

Abstract: Future Higgs Factories will allow the precise study of $e^{-}e^{+}\rightarrow q\bar{q}$ with $q=s,c,b,t$ interactions at different energies, from the Z-pole up to high energies never reached before. In this contribution, we will discuss the experimental prospects for the measurement of differential observables in $e^{-}e^{+}\rightarrow b\bar{b}$ and $e^{-}e^{+}\rightarrow c\bar{c}$ processes at hi… ▽ More Future Higgs Factories will allow the precise study of $e^{-}e^{+}\rightarrow q\bar{q}$ with $q=s,c,b,t$ interactions at different energies, from the Z-pole up to high energies never reached before. In this contribution, we will discuss the experimental prospects for the measurement of differential observables in $e^{-}e^{+}\rightarrow b\bar{b}$ and $e^{-}e^{+}\rightarrow c\bar{c}$ processes at high energies, 250 and 500 GeV, using full simulation samples and the full reconstruction chain from the ILD concept group. These processes call for superb primary and secondary vertex measurements, a high tracking efficiency to correctly measure the vertex charge and excellent hadron identification capabilities using $dE/dx$. This latter aspect will be discussed in detail together with its implementation within the standard flavour tagging tools developed for ILD (LCFI+). In addition, prospects associated with potential improvements using cluster counting techniques instead of traditional $dE/dx$ will be discussed. △ Less

Submitted 30 October, 2023; v1 submitted 27 July, 2023; originally announced July 2023.

Comments: This work was carried out in the framework of the ILD concept group. Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.3

Report number: ILD-PHYS-PROC--2023-004. IFIC/23-37

Two-particle angular correlations in the search for new physics at future $e^+e^-$ colliders

Authors: E. Musumeci, R. Perez-Ramos, A. Irles, I. Corredoira, V. A. Mitsou, E. Sarkisyan-Grinbaum, M. A. Sanchis-Lozano

Abstract: The analysis of angular particle correlations can yield valuable insights into the initial state of matter in high-energy collisions, thereby potentially revealing the existence of Beyond the Standard Model scenarios such as Hidden Valley (HV). In this study, we focus on a QCD-like hidden sector with relatively massive HV quarks ($\lesssim 100$~GeV) which might enlarge and strengthen azimuthal cor… ▽ More The analysis of angular particle correlations can yield valuable insights into the initial state of matter in high-energy collisions, thereby potentially revealing the existence of Beyond the Standard Model scenarios such as Hidden Valley (HV). In this study, we focus on a QCD-like hidden sector with relatively massive HV quarks ($\lesssim 100$~GeV) which might enlarge and strengthen azimuthal correlations of final-state SM hadrons. In particular, we study the formation and possible observation of \textit{ridge-like} structures in the angular two-particle correlation function at future $e^+e^-$ colliders, with a much cleaner environment than in hadron colliders, such as the LHC. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.3

Report number: IFIC/23-36

Experimental methods and prospects on the measurement of electroweak $b$ and $c$-quark observables at the ILC operating at 250 GeV

Authors: A. Irles, R. Pöschl, F. Richard

Abstract: This paper describes a comprehensive experimental study on viability and prospects for the measurement of electroweak observables in $e^{+}e^{-}\rightarrow b\bar{b}$ and $e^{+}e^{-}\rightarrow c\bar{c}$ processes at the International Linear Collider (ILC) operating at 250 GeV of centre of mass energy. The ILC will produce electron and positron beams with different degrees of longitudinal polarisat… ▽ More This paper describes a comprehensive experimental study on viability and prospects for the measurement of electroweak observables in $e^{+}e^{-}\rightarrow b\bar{b}$ and $e^{+}e^{-}\rightarrow c\bar{c}$ processes at the International Linear Collider (ILC) operating at 250 GeV of centre of mass energy. The ILC will produce electron and positron beams with different degrees of longitudinal polarisation (up to 80$\%$ for electrons and $30\%$ for positrons). The studies are based on a detailed simulation of the International Large Detector (ILD) concept. This will allow to inspect in detail the four independent chirality combinations of the electroweak couplings to electrons and other fermions and also perform background free analysis. The ILD design is based on the particle flow approach and the excellent vertexing and tracking capabilities, including charged hadron identification thanks to the $dE/dx$. We evaluate the main sources of experimental systematic uncertainties and identify the key design aspects of the accelerator and detector that are crucial to achieve the required per mil level accuracy that matches the expected statistical accuracy. △ Less

Submitted 19 December, 2023; v1 submitted 20 June, 2023; originally announced June 2023.

Comments: 35 pages, 21 figures, ILD concept group

Report number: ILD-PHYS-PUB--2023-001, IFIC/23-38

Detector Challenges of the strong-field QED experiment LUXE at the European XFEL

Authors: Adrián Irles

Abstract: The LUXE (Laser Und XFEL Experiment) aims at studying high-field QED in electron-laser and photon-laser interactions, with the 16.5 GeV electron beam of the European XFEL and a laser beam with a power of up to 350 TW. The experiment will measure the spectra of electrons, positrons and photons in expected ranges of $10^{-3}$ to $10^9$ per 1 Hz bunch crossing, depending on the laser power and focus.… ▽ More The LUXE (Laser Und XFEL Experiment) aims at studying high-field QED in electron-laser and photon-laser interactions, with the 16.5 GeV electron beam of the European XFEL and a laser beam with a power of up to 350 TW. The experiment will measure the spectra of electrons, positrons and photons in expected ranges of $10^{-3}$ to $10^9$ per 1 Hz bunch crossing, depending on the laser power and focus. These measurements have to be performed in the presence of a low-energy high radiation background. To meet these challenges, for high-rate electron and photon fluxes, the experiment will make use of dedicated physics-driven detectors at specific locations downstream of the interaction point. △ Less

Submitted 13 May, 2023; originally announced May 2023.

Comments: contribution to the 2023 Electroweak session of the 57th Rencontres de Moriond

Report number: LUXE-PROC-2023-001, IFIC/23-39

Report of the Topical Group on Top quark physics and heavy flavor production for Snowmass 2021

Authors: Reinhard Schwienhorst, Doreen Wackeroth, Kaustubh Agashe, Simone Alioli, Javier Aparisi, Giuseppe Bevilacqua, Huan-Yu Bi, Raymond Brock, Abel Gutierrez Camacho, Fernando Febres Cordero, Jorge de Blas, Regina Demina, Yong Du, Gauthier Durieux, Jarrett Fein, Roberto Franceschini, Juan Fuster, Maria Vittoria Garzelli, Alessandro Gavardi, Jason Gombas, Christoph Grojean, Jiale Gu, Marco Guzzi, Heribertus Bayu Hartanto, Andre Hoang , et al. (46 additional authors not shown)

Abstract: This report summarizes the work of the Energy Frontier Topical Group on EW Physics: Heavy flavor and top quark physics (EF03) of the 2021 Community Summer Study (Snowmass). It aims to highlight the physics potential of top-quark studies and heavy-flavor production processes (bottom and charm) at the HL-LHC and possible future hadron and lepton colliders and running scenarios. This report summarizes the work of the Energy Frontier Topical Group on EW Physics: Heavy flavor and top quark physics (EF03) of the 2021 Community Summer Study (Snowmass). It aims to highlight the physics potential of top-quark studies and heavy-flavor production processes (bottom and charm) at the HL-LHC and possible future hadron and lepton colliders and running scenarios. △ Less

Submitted 6 November, 2022; v1 submitted 22 September, 2022; originally announced September 2022.

Report of the Topical Group on Electroweak Precision Physics and Constraining New Physics for Snowmass 2021

Authors: Alberto Belloni, Ayres Freitas, Jun** Tian, Juan Alcaraz Maestre Aram Apyan, Bianca Azartash-Namin, Paolo Azzurri, Swagato Banerjee, Jakob Beyer, Saptaparna Bhattacharya, Jorge de Blas, Alain Blondel, Daniel Britzger, Mogens Dam, Yong Du, David d'Enterria, Keisuke Fujii, Christophe Grojean, Jiayin Gu, Tao Han, Michael Hildreth, Adrián Irles, Patrick Janot, Daniel Jeans, Mayuri Kawale, Elham E Khoda , et al. (43 additional authors not shown)

Abstract: The precise measurement of physics observables and the test of their consistency within the standard model (SM) are an invaluable approach, complemented by direct searches for new particles, to determine the existence of physics beyond the standard model (BSM). Studies of massive electroweak gauge bosons (W and Z bosons) are a promising target for indirect BSM searches, since the interactions of p… ▽ More The precise measurement of physics observables and the test of their consistency within the standard model (SM) are an invaluable approach, complemented by direct searches for new particles, to determine the existence of physics beyond the standard model (BSM). Studies of massive electroweak gauge bosons (W and Z bosons) are a promising target for indirect BSM searches, since the interactions of photons and gluons are strongly constrained by the unbroken gauge symmetries. They can be divided into two categories: (a) Fermion scattering processes mediated by s- or t-channel W/Z bosons, also known as electroweak precision measurements; and (b) multi-boson processes, which include production of two or more vector bosons in fermion-antifermion annihilation, as well as vector boson scattering (VBS) processes. The latter categories can test modifications of gauge-boson self-interactions, and the sensitivity is typically improved with increased collision energy. This report evaluates the achievable precision of a range of future experiments, which depend on the statistics of the collected data sample, the experimental and theoretical systematic uncertainties, and their correlations. In addition it presents a combined interpretation of these results, together with similar studies in the Higgs and top sector, in the Standard Model effective field theory (SMEFT) framework. This framework provides a model-independent prescription to put generic constraints on new physics and to study and combine large sets of experimental observables, assuming that the new physics scales are significantly higher than the EW scale. △ Less

Submitted 28 November, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Comments: 55 pages; Report of the EF04 topical group for Snowmass 2021; v2: few typos corrected and references added

Snowmass White Paper: prospects for measurements of the bottom quark mass

Authors: Javier Aparisi, Juan Fuster, Andre Hoang, Adrian Irles, Christopher Lepenik, Vicent Mateu, German Rodrigo, Michael Spira, Seidai Tairafune, Jun** Tian, Marcel Vos, Hitoshi Yamamoto, Ryo Yonamine

Abstract: In this white paper for the Snowmass '21 community planning exercise we provide quantitative prospects for bottom quark mass measurements in high-energy collisions at future colliders that can provide a precise test of the scale evolution, or "running" of quark masses predicted by QCD. In this white paper for the Snowmass '21 community planning exercise we provide quantitative prospects for bottom quark mass measurements in high-energy collisions at future colliders that can provide a precise test of the scale evolution, or "running" of quark masses predicted by QCD. △ Less

Submitted 31 March, 2022; originally announced March 2022.

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

Energy reconstruction of hadronic showers at the CERN PS and SPS using the Semi-Digital Hadronic Calorimeter

Authors: I. Laktineh, B. Liu, D. Boumediene, Y. W. Baek, D-W. Kim, S. C. Lee, B. G. Min, S. W. Park, Y. Deguchi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, L. Caponetto, C. Combaret, G. Garillot, G. Grenier, J-C. Ianigro, T. Kurca, I. Laktineh, B. Liu, B. Li, N. Lumb , et al. (53 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm… ▽ More The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) is the first technological prototype in a family of high-granularity calorimeters developed by the CALICE Collaboration to equip the experiments of future lepton colliders. The SDHCAL is a sampling calorimeter using stainless steel for absorber and Glass Resistive Plate Chambers (GRPC) as a sensitive medium. The GRPC are read out by 1~cm $\times$ 1~cm pickup pads combined to a multi-threshold electronics. The prototype was exposed to hadron beams in both the CERN PS and the SPS beamlines in 2015 allowing the test of the SDHCAL in a large energy range from 3~GeV to 80~GeV. After introducing the method used to select the hadrons of our data and reject the muon and electron contamination, we present the energy reconstruction approach that we apply to the data collected from both beamlines and we discuss the response linearity and the energy resolution of the SDHCAL. The results obtained in the two beamlines confirm the excellent SDHCAL performance observed with the data collected with the same prototype in the SPS beamline in 2012. They also show the stability of the SDHCAL in different beam conditions and different time periods. △ Less

Submitted 19 February, 2022; originally announced February 2022.

Comments: 21 pages,23 figures

Report number: CALICE-PUB-2022-001

$m_b$ at $m_H$: the running bottom quark mass and the Higgs boson

Authors: Javier Aparisi, Juan Fuster, André Hoang, Adrián Irles, Christopher Lepenik, Germán Rodrigo, Michael Spira, Seidai Tairafune, Marcel Vos, Hitoshi Yamamoto, Ryo Yonamine

Abstract: We present a new measurement of the bottom quark mass in the $\bar{MS}$ scheme at the renormalization scale of the Higgs boson mass from measurements of Higgs boson decay rates at the LHC: $m_b(m_H)= 2.60^{+0.36}_{-0.31}$ GeV. The measurement has a negligible theory uncertainty and excellent prospects to improve at the HL-LHC and a future Higgs factory. Confronting this result, and $m_b(m_b)$ from… ▽ More We present a new measurement of the bottom quark mass in the $\bar{MS}$ scheme at the renormalization scale of the Higgs boson mass from measurements of Higgs boson decay rates at the LHC: $m_b(m_H)= 2.60^{+0.36}_{-0.31}$ GeV. The measurement has a negligible theory uncertainty and excellent prospects to improve at the HL-LHC and a future Higgs factory. Confronting this result, and $m_b(m_b)$ from low-energy measurements and $m_b(m_Z)$ from $Z-$pole data, with the prediction of the scale evolution of the renormalization group equations, we find strong evidence for the "running" of the bottom quark mass. △ Less

Submitted 21 March, 2022; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: 4 pages + 2 figures + 2 pages of supplementary material

Results of the 2021 ECFA Early-Career Researcher Survey on Training in Instrumentation

Authors: ECFA Early-Career Researcher Panel, :, Anamika Aggarwal, Chiara Amendola, Liliana Apolinario, Jan-Hendrik Arling, Adi Ashkenazi, Kamil Augsten, Julien Baglio, Evelin Bakos, Liron Barak, Diogo Bastos, Bugra Bilin, Silvia Biondi, Neven Blaskovic Kraljevic, Lydia Brenner, Francesco Brizioli, Antoine Camper, Alessandra Camplani, Xabier Cid Vidal, Hüseyin Dag, Flavia de Almeida Dias, Eleonora Diociaiuti, Lennart van Doremalen, Katherine Dunne , et al. (52 additional authors not shown)

Abstract: The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the European ECR community. A working group within the ECFA ECR panel held a Townhall Meeting to get first input, and then designed and broadly circulated a detailed survey to gather feedback from the larger ECR community. A tota… ▽ More The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the European ECR community. A working group within the ECFA ECR panel held a Townhall Meeting to get first input, and then designed and broadly circulated a detailed survey to gather feedback from the larger ECR community. A total of 473 responses to this survey were received, providing a useful overview of the experiences of ECRs in instrumentation training and related topics. This report summarises the feedback received, and is intended to serve as an input to the ECFA Detector R&D Roadmap process. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Comments: Editors: Jan-Hendrik Arling, Katherine Dunne, Armin Ilg, Adrián Irles, Predrag Milenovic, Steven Schramm, Mariana Shopova, and Sarah Williams

Prospects for the measurement of the $b$-quark mass at the ILC

Authors: Juan Fuster, Adrian Irles, German Rodrigo, Seidai Tairafune, Marcel Vos, Hitoshi Yamamoto, Ryo Yonamine

Abstract: This note presents an analysis of the potential of future high-energy electron-positron colliders to measure the $b$-quark mass. We perform a full-simulation study of the measurement of the ratio of the three-jet rates in events with $b\bar{b}(g)$ and $q\bar{q}(g)$ production, $R_{3}^{bl}$, and assess the dominant uncertainties, including theory and experimental systematic uncertainties. We find t… ▽ More This note presents an analysis of the potential of future high-energy electron-positron colliders to measure the $b$-quark mass. We perform a full-simulation study of the measurement of the ratio of the three-jet rates in events with $b\bar{b}(g)$ and $q\bar{q}(g)$ production, $R_{3}^{bl}$, and assess the dominant uncertainties, including theory and experimental systematic uncertainties. We find that the ILC "Higgs factory" stage, with an integrated luminosity of 2 ab$^{-1}$ at $\sqrt{s}=$ 250 GeV can measure the $b-$quark $bar{MS}$ mass at a scale of 250 GeV ($m_b(250~$GeV$)$) with a precision of 1 GeV. From this result we extrapolate the potential of the GigaZ run running at $\sqrt{s}= m_Z$. We expect $m_b(m_Z)$ can be determined with an 0.12 GeV uncertainty, exceeding the precision of the LEP and SLD measurements by a factor $\sim$3. △ Less

Submitted 20 April, 2021; originally announced April 2021.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS2021), 15-18 March 2021. C21-03-15.1

Report number: IFIC/21-10, ILD-PHYS-PUB-2021-001

ILC Study Questions for Snowmass 2021

Authors: Keisuke Fujii, Christophe Grojean, Michael E. Peskin, Tim Barklow, Yuanning Gao, Shinya Kanemura, Jenny List, Mihoko Nojiri, Maxim Perelstein, Roman Poeschl, Juergen Reuter, Frank Simon, Tomohiko Tanabe, James D. Wells, Mikael Berggren, Esteban Fullana, Juan Fuster, Frank Gaede, Stefania Gori, Daniel Jeans, Adrian Irles, Sunghoon Jung, Shin-Ichi Kawada, Shigeki Matsumoto, Chris Potter , et al. (10 additional authors not shown)

Abstract: To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ stu… ▽ More To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ studies at Snowmass. △ Less

Submitted 20 January, 2021; v1 submitted 7 July, 2020; originally announced July 2020.

Comments: 49 pages, 1 figure, 1 table; v2: correction of some web links; v3: new Section 3 with a description of the ILC simulation framework put in place for Snowmass

Report number: DESY 20-112, KEK Preprint 2020-8, IFIC/20-34, LCTP-20-14 SLAC-PUB-17543

CALICE SiW ECAL -- Development and test of the chip-on-board PCB solution

Authors: Adrian Irles

Abstract: The highly granular silicon-tungsten electromagnetic calorimeter (SiW ECAL) is the reference design of the ECAL for the International Large Detector (ILD) concept, one of the two detector concepts proposed for the future International Linear Collider (ILC). Prototypes for this type of detector are developed within the CALICE Collaboration. This contribution reports on the development of an ultra-t… ▽ More The highly granular silicon-tungsten electromagnetic calorimeter (SiW ECAL) is the reference design of the ECAL for the International Large Detector (ILD) concept, one of the two detector concepts proposed for the future International Linear Collider (ILC). Prototypes for this type of detector are developed within the CALICE Collaboration. This contribution reports on the development of an ultra-thin PCB called Chip-on-Board (COB) that is equipped with wirebonded ASICs and pixelated silicon wafers. This set will form the basic unit of detection of the SiW ECAL. It will favour the design of an ultra compact calorimeter since these boards feature a thickness of 1.2 mm to be compared with the 3 mm of the default solution variant using ASICs in BGA packaging. We report also on the first results obtained with the COB boards on a beam test at DESY. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: Talk presented at the International Conference on Calorimetry at the High Energy Frontier (CHEF 2019) Fukuoka, Japan, 25 November-29 November, 2019, C19-11-25.3. arXiv admin note: substantial text overlap with arXiv:2004.12792

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

Authors: D. Boumediene, A. **ault, M. Tytgat, B. Bilki, D. Northacker, Y. Onel, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, Y. Deguchi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, L. Caponetto, C. Combaret, R. Ete G. Garillot, G. Grenier, J-C. Ianigro, T. Kurca, I. Laktineh , et al. (65 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines… ▽ More The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-granularity calorimeters developed by the CALICE collaboration to equip the experiments of future leptonic colliders. It was exposed to beams of hadrons, electrons and muons several times in the CERN PS and SPS beamlines between 2012 and 2018. We present here a new method of particle identification within the SDHCAL using the Boosted Decision Trees (BDT) method applied to the data collected in 2015. The performance of the method is tested first with Geant4-based simulated events and then on the data collected by the SDHCAL in the energy range between 10 and 80~GeV with 10~GeV energy steps. The BDT method is then used to reject the electrons and muons that contaminate the SPS hadron beams. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Report number: CALICE-PUB-2020-001

CALICE SiW ECAL -- Development and performance of a highly compact digital readout system

Authors: D. Breton, A. Irles, J. Jeglot, J. Maalmi, R. Pöschl, D. Zerwas

Abstract: A highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) is the reference design of the ECAL of the International Large Detector (ILD) concept, one of the two detector concepts for the detector(s) at the future International Linear Collider. Prototypes for this type of detector are developed within the CALICE Collaboration. During the last year a highly compact digital readout sys… ▽ More A highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) is the reference design of the ECAL of the International Large Detector (ILD) concept, one of the two detector concepts for the detector(s) at the future International Linear Collider. Prototypes for this type of detector are developed within the CALICE Collaboration. During the last year a highly compact digital readout system has been built. The system has been used for the first time in a beam test in Summer 2019 at DESY. This article summarises the main features of the system and report on its performance during the beam test. △ Less

Submitted 30 March, 2020; v1 submitted 21 February, 2020; originally announced February 2020.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS2019), Sendai, Japan, 28 October-1 November, 2019, C19-10-28, and the International Conference on Calorimetry at the High Energy Frontier (CHEF 2019) Fukuoka, Japan, 25 November-29 November, 2019, C19-11-25.3

Production and measurement of $e^{+}e^{-}\rightarrow c\bar{c}$ signatures at the 250 GeV ILC

Authors: A. Irles, R. Pöeschl, F. Richard

Abstract: This document discusses for the first time the experimental prospects on the measurement of cross section and the forward-backward asymmetry in $e^{-}e^{+}\rightarrow c\bar{c}$ collisions at 250 GeV at the International Linear Collider operating polarised beams. The cross section will be normalised to the total hadronic cross section. We discuss the results for an analysis assuming the integrated… ▽ More This document discusses for the first time the experimental prospects on the measurement of cross section and the forward-backward asymmetry in $e^{-}e^{+}\rightarrow c\bar{c}$ collisions at 250 GeV at the International Linear Collider operating polarised beams. The cross section will be normalised to the total hadronic cross section. We discuss the results for an analysis assuming the integrated luminosity of 2000 fb$^{-1}$ foreseen in the baseline project. The measurement requires determining the charge of both jets identified as originated by a $c$-quark. The charge measurement is optimally performed using the precise micro-vertex detector of the detector ILD and the charged kaon identification provided by the $\frac{dE}{dx}$ information of its TPC. Thanks to the beam polarisation, we can separate the four independent chirality combinations of the electroweak couplings, enhancing in this way the sensitivity to new physics effects. We show that due to the unprecedented precision that will be achieved by the ILC for these observables, the ILC will be sensitive to the existence of beyond the standard model Randal Sundrum resonances of several tens of TeV. △ Less

Submitted 13 February, 2020; originally announced February 2020.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS2019), Sendai, Japan, 28 October-1 November, 2019. C19-10-28

Report on the ECFA Early-Career Researchers Debate on the 2020 European Strategy Update for Particle Physics

Authors: N. Andari, L. Apolinário, K. Augsten, E. Bakos, I. Bellafont, L. Beresford, A. Bethani, J. Beyer, L. Bianchini, C. Bierlich, B. Bilin, K. L. Bjørke, E. Bols, P. A. Brás, L. Brenner, E. Brondolin, P. Calvo, B. Capdevila, I. Cioara, L. N. Cojocariu, F. Collamati, A. de Wit, F. Dordei, M. Dordevic, T. A. du Pree , et al. (96 additional authors not shown)

Abstract: A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the E… ▽ More A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the ECRs discussed future colliders in terms of the physics prospects, their implications for accelerator and detector technology as well as computing and software. The discussion was organised into several topic areas. From these areas two common themes were particularly highlighted by the ECRs: sociological and human aspects; and issues of the environmental impact and sustainability of our research. △ Less

Submitted 7 February, 2020; originally announced February 2020.

Comments: Editors: A. Bethani, E. Brondolin, A. A. Elliot, J. García Pardiñas, G. Gilles, L. Gouskos, E. Gouveia, E. Graverini, N. Hermansson-Truedsson, A. Irles, H. Jansen, K. H. Mankinen, E. Manoni, A. Mathad, J. McFayden, M. Queitsch-Maitland, J. Rembser, E. T. J. Reynolds, R. Schöfbeck, P. Schwendimann, S. Sekmen, P. Sznajder, S. L. Williams, D. Zanzi

Report number: CERN-OPEN-2020-006

EUDAQ $-$ A Data Acquisition Software Framework for Common Beam Telescopes

Authors: P. Ahlburg, S. Arfaoui, J. -H. Arling, H. Augustin, D. Barney, M. Benoit, T. Bisanz, E. Corrin, D. Cussans, D. Dannheim, J. Dreyling-Eschweiler, T. Eichhorn, A. Fiergolski, I. -M. Gregor, J. Grosse-Knetter, D. Haas, L. Huth, A. Irles, H. Jansen, J. Janssen, M. Keil, J. S. Keller, M. Kiehn, H. J. Kim, J. Kroll , et al. (32 additional authors not shown)

Abstract: EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed… ▽ More EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications. △ Less

Submitted 18 November, 2019; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 32 pages, 11 figures

EUDAQ2 -- A Flexible Data Acquisition Software Framework for Common Test Beams

Authors: Y. Liu, M. S. Amjad, P. Baesso, D. Cussans, J. Dreyling-Eschweiler, R. Ete, I. Gregor, L. Huth, A. Irles, H. Jansen, K. Krueger, J. Kvasnicka, R. Peschke, E. Rossi, A. Rummler, F. Sefkow, M. Stanitzki, M. Wing, M. Wu

Abstract: The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types… ▽ More The data acquisition software framework, EUDAQ, was originally developed to read out data from the EUDET-type pixel telescopes. This was successfully used in many test beam campaigns in which an external position and time reference were required. The software has recently undergone a significant upgrade, EUDAQ2, which is a generic, modern and modular system for use by many different detector types, ranging from tracking detectors to calorimeters. EUDAQ2 is suited as an overarching software that links individual detector readout systems and simplifies the integration of multiple detectors. The framework itself supports several triggering and event building modes. This flexibility makes test beams with multiple detectors significantly easier and more efficient, as EUDAQ2 can adapt to the characteristics of each detector prototype during testing. The system has been thoroughly tested during multiple test beams involving different detector prototypes. EUDAQ2 has now been released and is freely available under an open-source license. △ Less

Submitted 4 September, 2019; v1 submitted 23 July, 2019; originally announced July 2019.

Comments: 17 pages, 6 figures

Complementarity between ILC250 and ILC-GigaZ

Authors: A. Irles, R. Pöschl, F. Richard, H. Yamamoto

Abstract: In view of the very precise measurements on fermion couplings which will be performed at ILC250 with polarized beams, there is emerging evidence that the LEP1/SLC measurements on these couplings are an order of magnitude too imprecise to match the accuracies reachable at ILC250. This will therefore severely limit the indirect sensitivity to new resonances and require revisiting the possibility to… ▽ More In view of the very precise measurements on fermion couplings which will be performed at ILC250 with polarized beams, there is emerging evidence that the LEP1/SLC measurements on these couplings are an order of magnitude too imprecise to match the accuracies reachable at ILC250. This will therefore severely limit the indirect sensitivity to new resonances and require revisiting the possibility to run ILC at the Z pole with polarized electrons. This work was done as a contribution to the ESU 2018-2020. △ Less

Submitted 7 June, 2019; v1 submitted 1 May, 2019; originally announced May 2019.

Comments: Work presented at the Linear Collider Community Meeting, 8-9 April 2019, in Lausanne https://indico.cern.ch/event/789524/

Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype

Authors: CALICE Collaboration, G. Eigen, T. Price, N. K. Watson, A. Winter, Y. Do, A. Khan, D. Kim, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, J. Apostolakis, J. Giraud, D. Grondin, J. -Y. Hostachy, O. Bach, V. Bocharnikov, E. Brianne , et al. (81 additional authors not shown)

Abstract: A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorith… ▽ More A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated. △ Less

Submitted 18 September, 2019; v1 submitted 16 February, 2019; originally announced February 2019.

Comments: 21 pages, 21 figures

Report number: CALICE-PUB-2019-002

Journal ref: Nucl.Instrum.Meth. A937 (2019) 41-52

Extracting the top-quark running mass using $t\bar{t}$+1-jet events produced at the Large Hadron Collider

Authors: J. Fuster, A. Irles, D. Melini, P. Uwer, M. Vos

Abstract: We present the calculation of the next-to-leading order QCD corrections for top-quark pair production in association with an additional jet at hadron colliders, using the modified minimal subtraction scheme to renormalize the top-quark mass. The results are compared to measurements at the Large Hadron Collider run I. In particular, we determine the top-quark running mass from a fit of the theoreti… ▽ More We present the calculation of the next-to-leading order QCD corrections for top-quark pair production in association with an additional jet at hadron colliders, using the modified minimal subtraction scheme to renormalize the top-quark mass. The results are compared to measurements at the Large Hadron Collider run I. In particular, we determine the top-quark running mass from a fit of the theoretical results presented here to the LHC data. △ Less

Submitted 8 December, 2017; v1 submitted 3 April, 2017; originally announced April 2017.

Report number: HU-EP-17/05, LAL 17-034, DESY 17-053

Journal ref: Eur.Phys.J. C77 (2017) no.11, 794 (2017-11-22)

Top physics at high-energy lepton colliders

Authors: M. Vos, G. Abbas, M. Beneke, S. Bilokin, M. Costa, S. De Curtis, K. Fujii, J. Fuster, I. Garcia Garcia, P. Gomis, A. Hoang, A. Irles, Y. Kiyo, M. Kurata, L. Linssen, J. List, M. Nebot, M. Perello Rosello, R. Poeschl, N. Quach, J. Reuter, F. Richard, G. Rodrigo, Ph. Roloff, E. Ros , et al. (3 additional authors not shown)

Abstract: A summary is presented of the workshop "top physics at linear colliders" that was held at IFIC Valencia from the 30th of June to the 3rd July 2015. We present an up-to-date status report of studies into the potential for top quark physics of lepton colliders with an energy reach that exceeds the top quark pair production threshold, with a focus on the linear collider projects ILC and CLIC. This su… ▽ More A summary is presented of the workshop "top physics at linear colliders" that was held at IFIC Valencia from the 30th of June to the 3rd July 2015. We present an up-to-date status report of studies into the potential for top quark physics of lepton colliders with an energy reach that exceeds the top quark pair production threshold, with a focus on the linear collider projects ILC and CLIC. This summary shows that such projects can offer very competitive determinations of top quark properties (mass, width) and its interactions with other Standard Model particles, in particular electroweak gauge bosons and the Higgs boson. In both areas the prospects exceed the LHC potential significantly - often by an order of magnitude. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Report number: DESY 16-038, IFIC 16-12

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

Authors: Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, J. Apostolakis, G. Folger, C. Grefe, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, C. Carloganu, V. Français, G. Cho, D-W. Kim, S. C. Lee, W. Park, S. Vallecorsa, S. Cauwenbergh, M. Tytgat, A. **ault, N. Zaganidis, E. Brianne, A. Ebrahimi , et al. (103 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e… ▽ More The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated. △ Less

Submitted 15 April, 2016; originally announced April 2016.

First results of the CALICE SDHCAL technological prototype

Authors: V. Buridon, C. Combaret, L. Caponetto, R. Eté, G. Garillot, G. Grenier, R. Han, J. C. Ianigro, R. Kieffer, I. Laktineh, N. Lumb, H. Mathez, L. Mirabito, A. Petrukhin, A. Steen, J. Berenguer Antequera, E. Calvo Alamillo, M. -C. Fouz, J. Marin, J. Puerta-Pelayo, A. Verdugo, E. Cortina Gil, S. Mannai, S. Cauwenbergh, M. Tytgat , et al. (96 additional authors not shown)

Abstract: The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDH… ▽ More The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDHCAL during the test beam was found to be very satisfactory with an efficiency exceeding 90% for almost all of the 48 active layers. A linear response (within 5%) and a good energy resolution are obtained for a large range of hadronic energies (5-80GeV) by applying appropriate calibration coefficients to the collected data for both the Digital (Binary) and the Semi-Digital (Multi-threshold) modes of the SDHCAL prototype. The Semi-Digital mode shows better performance at energies exceeding 30GeV △ Less

Submitted 20 March, 2016; v1 submitted 6 February, 2016; originally announced February 2016.

Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

Authors: The CALICE collaboration, M. Chefdeville, Y. Karyotakis, J. Repond, J. Schlereth, L. Xia, G. Eigen, J. S. Marshall, M. A. Thomson, D. R. Ward, N. Alipour Tehrani, J. Apostolakis, D. Dannheim, K. Elsener, G. Folger, C. Grefe, V. Ivantchenko, M. Killenberg, W. Klempt, E. van der Kraaij, L. Linssen, A. -I. Lucaci-Timoce, A. Münnich, S. Poss, A. Ribon , et al. (158 additional authors not shown)

Abstract: We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolutio… ▽ More We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010. △ Less

Submitted 11 December, 2015; v1 submitted 2 September, 2015; originally announced September 2015.

Comments: 35 pages, 21 figures, 8 tables

Journal ref: 2015 JINST 10 P12006

A new observable to measure the top-quark mass at hadron colliders

Authors: Simone Alioli, Patricia Fernandez, Juan Fuster, Adrian Irles, Sven-Olaf Moch, Peter Uwer, Marcel Vos

Abstract: A new method to measure the top-quark mass in high energetic hadron collisions is presented. We use theoretical predictions calculated at next-to-leading order accuracy in quantum chromodynamics to study the (normalized) differential distribution of the \ttbaronejet cross section with respect to its invariant mass $\sqrt{\sttj}$. The sensitivity of the method to the top-quark mass together with th… ▽ More A new method to measure the top-quark mass in high energetic hadron collisions is presented. We use theoretical predictions calculated at next-to-leading order accuracy in quantum chromodynamics to study the (normalized) differential distribution of the \ttbaronejet cross section with respect to its invariant mass $\sqrt{\sttj}$. The sensitivity of the method to the top-quark mass together with the impact of various theoretical and experimental uncertainties has been investigated and quantified. The new method allows for a complementary measurement of the top-quark mass parameter and has a high potential to become competitive in precision with respect to established approaches. Furthermore we emphasize that in the proposed method the mass parameter is uniquely defined through one-loop renormalization. △ Less

Submitted 26 March, 2013; originally announced March 2013.

Report number: DESY 13-014, HU-EP-12/30, IFIC/13-08, LPN 13-011, SFB/CPP-13-06