-
In-beam performance of a Resistive Plate Chamber operated with eco-friendly gas mixtures
Authors:
L. Quaglia,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati,
M. Gagliardi
, et al. (32 additional authors not shown)
Abstract:
ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identifi…
▽ More
ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identification purposes. The correct operation of these detectors is ensured by the choice of the proper gas mixture. Currently they are operated with a mixture of C$_{2}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ but, starting from 2017, new EU regulations have enforced a progressive phase-out of C$_{2}$H$_{2}$F$_{4}$ because of its large Global Warming Potential (GWP), making it difficult and costly to purchase. CERN asked LHC experiments to reduce greenhouse gases emissions, to which RPC operation contributes significantly. A possible candidate for C$_{2}$H$_{2}$F$_{4}$ replacement is the C$_{3}$H$_{2}$F$_{4}$ (diluted with other gases, such as CO$_{2}$), which has been extensively tested using cosmic rays. Promising gas mixtures have been devised; the next crucial steps are the detailed in-beam characterization of such mixtures as well as the study of their performance under increasing irradiation levels. This contribution will describe the methodology and results of beam tests carried out at the CERN GIF++ (equipped with a high activity $^{137}$Cs source and muon beam) with an ALICE-like RPC prototype, operated with several mixtures with varying proportions of CO$_{2}$, C$_{3}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ . Absorbed currents, efficiencies, prompt charges, cluster sizes, time resolutions and rate capabilities will be presented, both from digitized (for detailed shape and charge analysis) and discriminated (using the same front-end electronics as employed in ALICE) signals.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging
Authors:
The RPC ECOGas@GIF++ collaboration,
:,
L. Quaglia,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti
, et al. (35 additional authors not shown)
Abstract:
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, invo…
▽ More
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, involving ALICE, ATLAS, CMS, LHCb/SHiP, and EP-DT communities, has undertaken intensive R\&D efforts to explore new gas mixtures for RPC technology.
A leading alternative under investigation is HFO1234ze, boasting a low GWP of 6 and demonstrating reasonable performance compared to R-134a. Over the past few years, RPC detectors with slightly different characteristics and electronics have been studied using HFO and CO$_{2}$-based gas mixtures at the CERN Gamma Irradiation Facility. An aging test campaign was launched in August 2022, and during the latest test beam in July 2023, all detector systems underwent evaluation. This contribution will report the results of the aging studies and the performance evaluations of the detectors with and without irradiation.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility
Authors:
L. Quaglia,
D. Ramos,
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
D. Boscherini,
F. Bordon,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciacco,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati
, et al. (33 additional authors not shown)
Abstract:
Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in a…
▽ More
Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in avalanche mode and in view of evaluating possible ageing effects after long high background irradiation periods, e.g. High-Luminosity LHC phase. This challenging research is also part of a task of the European AidaInnova project.
A promising eco-friendly gas identified for RPC operation is the tetrafluoruropropene (C$_{3}$H$_{2}$F$_{4}$, commercially known as HFO-1234ze) that has been studied at the CERN GIF++ in combination with different percentages of CO$_2$. Between the end of 2021 and 2022 several beam tests have been carried out to establish the performance of RPCs operated with such mixtures before starting the irradiation campaign for the ageing study.
Results of these tests for different RPCs layouts and different gas mixtures, under increasing background rates are presented here, together with the preliminary outcome of the detector ageing tests.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures
Authors:
M. Abbrescia,
G. Aielli,
R. Aly,
M. C. Arena,
M. Barroso,
L. Benussi,
S. Bianco,
F. Bordon,
D. Boscherini,
A. Bruni,
S. Buontempo,
M. Busato,
P. Camarri,
R. Cardarelli,
L. Congedo,
D. De Jesus Damiao,
M. De Serio,
A. Di Ciaccio,
L. Di Stante,
P. Dupieux,
J. Eysermans,
A. Ferretti,
G. Galati,
M. Gagliardi,
R. Guida
, et al. (30 additional authors not shown)
Abstract:
Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider exp…
▽ More
Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider experiments, were performed, and demonstrate a performance basically similar to the one obtained with the gas mixtures currently in use, based on Tetrafluoroethane, which is being progressively phased out for its possible contribution to the greenhouse effect. Long term aging tests are also being carried out, with the goal to demonstrate the possibility of using these eco-friendly gas mixtures during the whole High Luminosity phase of the Large Hadron Collider.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Searching for an eco-friendly gas mixture for the ALICE Resistive Plate Chambers
Authors:
Luca Quaglia,
R. Cardarelli,
B. Liberti,
E. Pastori,
G. Proto,
G. Aielli,
P. Camarri,
A. Di Ciacco,
L. Di Stante,
R. Santonico,
G. Alberghi,
D. Boscherini,
A. Bruni,
L. Massa,
A. Polini,
M. Romano,
L. Benussi,
S. Bianco,
L. Passamonti,
D. Piccolo,
D. Pierluigi,
A. Russo M. Ferrini,
G. Saviano,
M. Abbrescia,
L. Congedo
, et al. (25 additional authors not shown)
Abstract:
The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2…
▽ More
The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2014. Even though research activities are excluded from these regulations, the phase-down will inevitably increase their price and CERN is also aiming to cut down on its emissions. For these reasons it is crucial to find a more eco-friendly gas mixture for RPCs by the time of the LHC long shutdown 3, foreseen in 2026. Since $C_{2}H_{2}F_{4}$ is the main contributor to the mixture GWP, an extensive R&D process has started to replace it with tetrafluoropropene ($C_{3}H_{2}F_{4}$), due to its chemical similarity with $C_{2}H_{2}F_{4}$ and its low GWP (around 7). Preliminary tests with cosmic rays have shown promising results in terms of detector performance. The next step is to study the long-term behavior of RPCs operated with these new gas mixtures (aging studies). Since this is a subject of interest for all (and not only) the LHC experiments, a collaboration, ECOgas@GIF++, was setup to carry out joint studies. Among others, a small ALICE-like RPC was installed at the Gamma Irradiation Facility at CERN, where they are exposed to a strong radiation field, coming from a 12.5 TBq $^{137}$Cs source, which allows one to simulate many years of operation in a relatively short time. The facility also provides a muon beam at specific times of the year, which can be used to study the detector performance (e.g. efficiency and cluster size) during and after irradiation.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Electron Collision Cross Sections in Tetrafluoropropene HFO1234ze(E) for Gas Mixtures in Resistive Plate Chambers
Authors:
Antonio Bianchi,
Alessandro Ferretti,
Martino Gagliardi,
Ermanno Vercellin
Abstract:
In recent years, there has been growing interest in tetrafluoropropene HFO1234ze(E) (C$_{3}$H$_{2}$F$_{4}$) for Resistive Plate Chambers (RPCs). This novel gas is considered a promising alternative to the standard mixtures currently used in RPCs, thanks to its low global warming potential. The knowledge of electron collision cross sections in C$_{3}$H$_{2}$F$_{4}$ enables reliable predictions of e…
▽ More
In recent years, there has been growing interest in tetrafluoropropene HFO1234ze(E) (C$_{3}$H$_{2}$F$_{4}$) for Resistive Plate Chambers (RPCs). This novel gas is considered a promising alternative to the standard mixtures currently used in RPCs, thanks to its low global warming potential. The knowledge of electron collision cross sections in C$_{3}$H$_{2}$F$_{4}$ enables reliable predictions of electron transport coefficients and reaction rates in C$_{3}$H$_{2}$F$_{4}$-based gas mixtures. This allows for optimizing the C$_{3}$H$_{2}$F$_{4}$-based gas mixtures to achieve the desired performance in RPCs.
From measurements of electron transport coefficients and reaction rates, a complete set of scattering cross sections for electrons in C$_{3}$H$_{2}$F$_{4}$ has been derived. Validation of the electron collision cross sections is achieved through systematic comparisons of electron swarm parameters with experimental data in both pure C$_{3}$H$_{2}$F$_{4}$ and C$_{3}$H$_{2}$F$_{4}$/CO$_{2}$ gas mixtures. Given the influence of electron attachment in C$_{3}$H$_{2}$F$_{4}$ by the gas density, this work also includes precise calculations of the critical electric field strength in such mixtures. This set of cross sections has been further utilized to compute the effective ionization Townsend coefficient in gas mixtures containing C$_{3}$H$_{2}$F$_{4}$, potentially applicable for RPCs.
△ Less
Submitted 9 March, 2024; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Performance and aging studies for the ALICE muon RPCs
Authors:
Luca Quaglia,
Antonio Bianchi,
Alessandro Ferretti,
Martino Gagliardi,
Diego Stocco,
Roberto Guida,
Beatrice Mandelli,
Laura Alvigini
Abstract:
The ALICE muon trigger (MTR) system consists of 72 Resistive Plate Chamber (RPC) detectors arranged in two stations, each composed of two planes with 18 RPCs per plane. The detectors are operated in maxi-avalanche mode using a mixture of 89.7% C$_2$H$_2$F$_4$, 10% i-C$_4$H$_{10}$ and 0.3% SF$_6$. A number of detector performance indicators, such as efficiency and dark current, have been monitored…
▽ More
The ALICE muon trigger (MTR) system consists of 72 Resistive Plate Chamber (RPC) detectors arranged in two stations, each composed of two planes with 18 RPCs per plane. The detectors are operated in maxi-avalanche mode using a mixture of 89.7% C$_2$H$_2$F$_4$, 10% i-C$_4$H$_{10}$ and 0.3% SF$_6$. A number of detector performance indicators, such as efficiency and dark current, have been monitored over time throughout the LHC Run2 (2015-18). While the efficiency showed very good stability, a steady increase in the absorbed dark current was observed.
Since the end of 2018, the LHC has entered a phase of long shutdown, during which the ALICE experiment will be upgraded to cope with the next phase of data taking, expected in 2021. The MTR is undergoing a major upgrade of the front-end and readout electronics, and will change its functionalities, becoming a Muon Identifier. Only the replacement of the most irradiated RPCs is planned during the upgrade. It is therefore important to perform dedicated studies to gain further insights into the status of the detector. In particular, two RPCs were flushed with pure Ar gas for a prolonged period of time and a plasma was created by fully ionizing the gas. The output gas was analyzed using a Gas Chromatograph combined with a Mass Spectrometer and the possible presence of fluorinated compounds originating from the interaction of the plasma with the inner surfaces of the detector has been assessed using an Ion-Selective Electrode station.
This contribution will include a detailed review of the ALICE muon RPC performance at the LHC. The procedure and results of the argon plasma test, described above, are also discussed.
△ Less
Submitted 28 January, 2021; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Characterization of tetrafluoropropene-based gas mixtures for the Resistive Plate Chambers of the ALICE muon spectrometer
Authors:
A. Bianchi,
S. Delsanto,
P. Dupieux,
A. Ferretti,
M. Gagliardi,
B. Joly,
S. P. Manen,
M. Marchisone,
L. Micheletti,
A. Rosano,
E. Vercellin
Abstract:
The muon identification system of the ALICE experiment at the CERN LHC is based on Resistive Plate Chamber (RPC) detectors. These RPCs are operated in the so-called maxi-avalanche mode with a gas mixture made of tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), sulfur hexafluoride (SF$_{6}$) and isobutane (i-C$_{4}$H$_{10}$). All of these components are greenhouse gases: in particular, the first two gase…
▽ More
The muon identification system of the ALICE experiment at the CERN LHC is based on Resistive Plate Chamber (RPC) detectors. These RPCs are operated in the so-called maxi-avalanche mode with a gas mixture made of tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), sulfur hexafluoride (SF$_{6}$) and isobutane (i-C$_{4}$H$_{10}$). All of these components are greenhouse gases: in particular, the first two gases are already phasing out of production, due to recent European Union regulations, and their cost is progressively increasing. Therefore, finding a new eco-friendly gas mixture has become extremely important in order to reduce the impact of the RPC operation on the environment, and for economic reasons. Due to the similar chemical structure, hydrofluoroolefins appear appropriate candidates to replace C$_{2}$H$_{2}$F$_{4}$ thanks to their very low GWPs, especially tetrafluoropropene (C$_{3}$H$_{2}$F$_{4}$) with the trade name HFO1234ze. In order to identify an eco-friendly gas mixture fulfilling the requirements for operation in the ALICE environment in the coming years, a dedicated experimental set-up has been built to carry out R&D studies on promising gas mixtures. Measurements have been performed with a small-size RPC equipped with the front-end electronics, providing signal amplification, developed for ALICE operation at high luminosity after the LHC Long Shutdown 2. HFO1234ze-based mixtures with the addition of CO$_{2}$ are discussed in this paper as well as the role of i-C$_{4}$H$_{10}$ and SF$_{6}$ as quenchers in such mixtures.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Performance of the RPC-based ALICE muon trigger system at the LHC
Authors:
Francesco Bossù,
Martino Gagliardi,
Massimiliano Marchisone,
ALICE Collaboration
Abstract:
The forward muon spectrometer of ALICE (A Large Ion Collider Experiment) is equipped with a trigger system made of four planes of Resistive Plate Chambers (RPC), arranged in two stations with two planes each, for a total area of about 140 m2 . The system provides single and di-muon triggers with suitable transverse momentum selection, optimised for the physics of quarkonia and open heavy flavour.…
▽ More
The forward muon spectrometer of ALICE (A Large Ion Collider Experiment) is equipped with a trigger system made of four planes of Resistive Plate Chambers (RPC), arranged in two stations with two planes each, for a total area of about 140 m2 . The system provides single and di-muon triggers with suitable transverse momentum selection, optimised for the physics of quarkonia and open heavy flavour. In the first two years of data-taking at the Large Hadron Collider (2010 and 2011) the 72 RPCs were operated in highly saturated avalanche mode in both pp and Pb-Pb collisions. The integrated charge was about 1.3 mC/cm2 on average and 3.5 mC/cm2 for the most exposed detectors. This paper describes two main results. The first result is the determination of the RPC performance, with particular focus on the stability of the main detector parameters such as efficiency, dark current, and dark rate. The second result is the measurement of the muon trigger performance in Pb-Pb collisions at sqrt(s_NN) = 2.76 TeV, in terms of the reliability and stability of the trigger decision logic.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
-
Measurement of J/psi production at the LHC with the ALICE experiment
Authors:
M. Gagliardi
Abstract:
ALICE (A Large Ion Collider Experiment) aims at studying the behaviour of nuclear matter at high energy densities and the transition to the Quark Gluon Plasma (QGP), expected to occur in ultra-relativistic heavy ion collisions. Quarkonia production measurements in both Pb-Pb and pp collisions play a crucial role in the ALICE physics program. Quarkonium detection is possible in ALICE at both forwar…
▽ More
ALICE (A Large Ion Collider Experiment) aims at studying the behaviour of nuclear matter at high energy densities and the transition to the Quark Gluon Plasma (QGP), expected to occur in ultra-relativistic heavy ion collisions. Quarkonia production measurements in both Pb-Pb and pp collisions play a crucial role in the ALICE physics program. Quarkonium detection is possible in ALICE at both forward (in the dimuon channel) and mid-rapidity (in the dielectron channel). In 2010, the Large Hadron Collider has provided pp collisions at sqrt(s)=7 TeV and Pb-Pb collisions at sqrt(sNN)=2.76 TeV. The ALICE results on J/psi production in pp collisions are presented, along with the status of the Pb-Pb analysis.
△ Less
Submitted 25 September, 2011;
originally announced September 2011.
-
Measurement of reference cross sections in pp and Pb-Pb collisions at the LHC in van der Meer scans with the ALICE detector
Authors:
Martino Gagliardi
Abstract:
Reference cross sections have been measured with the ALICE detector in both pp and Pb-Pb collisions, in dedicated luminosity calibration experiments (van der Meer scans) at the LHC. The results and their uncertainties are discussed, together with a few selected applications.
Reference cross sections have been measured with the ALICE detector in both pp and Pb-Pb collisions, in dedicated luminosity calibration experiments (van der Meer scans) at the LHC. The results and their uncertainties are discussed, together with a few selected applications.
△ Less
Submitted 25 September, 2011;
originally announced September 2011.
-
Phenomenological interpolation of the inclusive J/psi cross section to proton-proton collisions at 2.76 TeV and 5.5 TeV
Authors:
F. Bossu,
Z. Conesa del Valle,
A. de Falco,
M. Gagliardi,
S. Grigoryan,
G. Martínez García
Abstract:
We present a study of the inclusive J/psi cross section at 2.76 TeV and 5.5 TeV. The energy dependence of the cross section, rapidity and transverse momentum distributions are evaluated phenomenologically. Their knowledge is crucial as a reference for the interpretation of A-A and p-A J/psi results at the LHC. Our approach is the following: first, we estimate the energy evolution of the pt-integra…
▽ More
We present a study of the inclusive J/psi cross section at 2.76 TeV and 5.5 TeV. The energy dependence of the cross section, rapidity and transverse momentum distributions are evaluated phenomenologically. Their knowledge is crucial as a reference for the interpretation of A-A and p-A J/psi results at the LHC. Our approach is the following: first, we estimate the energy evolution of the pt-integrated J/psi cross section at mid-rapidity; then, we evaluate the rapidity dependence; finally, we study the transverse momentum distribution trend. Whenever possible, both theory driven (based on pQCD predictions) and functional form (data driven fits) calculations are discussed. Our predictions are compared with the recently obtained results by the ALICE collaboration in pp collisions at 2.76 TeV.
△ Less
Submitted 24 April, 2012; v1 submitted 11 March, 2011;
originally announced March 2011.
