-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Focus topics for the ECFA study on Higgs / Top / EW factories
Authors:
Jorge de Blas,
Patrick Koppenburg,
Jenny List,
Fabio Maltoni,
Juan Alcaraz Maestre,
Juliette Alimena,
John Alison,
Patrizia Azzi,
Paolo Azzurri,
Emanuele Bagnaschi,
Timothy Barklow,
Matthew J. Basso,
Josh Bendavid,
Martin Beneke,
Eli Ben-Haim,
Mikael Berggren,
Marzia Bordone,
Ivanka Bozovic,
Valentina Cairo,
Nuno Filipe Castro,
Marina Cobal,
Paula Collins,
Mogens Dam,
Valerio Dao,
Matteo Defranchis
, et al. (83 additional authors not shown)
Abstract:
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
△ Less
Submitted 18 January, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Running of the top quark mass at NNLO in QCD
Authors:
Matteo M. Defranchis,
Jan Kieseler,
Katerina Lipka,
Javier Mazzitelli
Abstract:
The running of the top quark mass ($m_\mathrm{t}$) is probed at the next-to-next-to-leading order (NNLO) in quantum chromodynamics (QCD) for the first time. The result is obtained by comparing calculations in the modified minimal subtraction ($\mathrm{\bar{MS}}$) renormalisation scheme to a differential measurement of the top quark-antiquark ($\mathrm{t\bar{t}}$) production cross section at…
▽ More
The running of the top quark mass ($m_\mathrm{t}$) is probed at the next-to-next-to-leading order (NNLO) in quantum chromodynamics (QCD) for the first time. The result is obtained by comparing calculations in the modified minimal subtraction ($\mathrm{\bar{MS}}$) renormalisation scheme to a differential measurement of the top quark-antiquark ($\mathrm{t\bar{t}}$) production cross section at $\sqrt{s} = 13~\mathrm{TeV}$. The scale dependence of $m_\mathrm{t}$ is extracted as a function of the invariant mass of the $\mathrm{t\bar{t}}$ system, up to an energy scale of about $0.5~\mathrm{TeV}$. The observed running is found to be in good agreement with the three-loop solution of the QCD renormalisation group equations.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Top quark mass and cross sections in ATLAS and CMS
Authors:
Matteo M. Defranchis
Abstract:
With the large data set delivered during the second run of the CERN LHC, inclusive and differential measurements of the top quark-antiquark production cross section at the ATLAS and CMS experiments often reach a precision that is comparable or superior to that of the corresponding theoretical calculations. The results of these measurements can be used to test the validity of perturbative quantum c…
▽ More
With the large data set delivered during the second run of the CERN LHC, inclusive and differential measurements of the top quark-antiquark production cross section at the ATLAS and CMS experiments often reach a precision that is comparable or superior to that of the corresponding theoretical calculations. The results of these measurements can be used to test the validity of perturbative quantum chromodynamics (QCD), and to precisely extract the values of parameters of the QCD Lagrangian such as the top quark mass ($m_\mathrm{t}$). The value of $m_\mathrm{t}$ can also be measured, with higher precision, by fully or partially reconstructing the invariant mass of the top quark decay products. However, the results of these measurements lack a clear theoretical interpretation. In these proceedings, the most recent measurements of the top quark mass and cross sections by ATLAS and CMS are presented.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Measuring standard model parameters using top-quark cross sections in ATLAS and CMS
Authors:
Matteo M. Defranchis
Abstract:
Theoretical predictions of top-quark cross sections depend on the values of the parameters of the quantum chromodynamics Lagrangian, such as the strong coupling constant and the mass of the top quark, but also on parameters of the electroweak sector of the standard model and parton distribution functions. Comparisons between state-of-the-art calculations and recent measurements at the ATLAS and CM…
▽ More
Theoretical predictions of top-quark cross sections depend on the values of the parameters of the quantum chromodynamics Lagrangian, such as the strong coupling constant and the mass of the top quark, but also on parameters of the electroweak sector of the standard model and parton distribution functions. Comparisons between state-of-the-art calculations and recent measurements at the ATLAS and CMS experiments at the CERN LHC allow for the precise determination of these parameters. In this proceeding, the most recent results by the two collaborations are summarized and discussed.
△ Less
Submitted 8 April, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Probing QCD using top quark pair production at $\sqrt{s} = 13~\mathrm{TeV}$ in CMS
Authors:
Matteo M. Defranchis
Abstract:
Measurements of the top quark-antiquark pair production cross section, $σ_\mathrm{t\bar{t}}$, can be used to constrain the strong coupling constant, $α_{S}$, the top quark mass, $m_\mathrm{t}$, and the parton distribution functions (PDFs). In this poster, the two most recent relevant results published by the CMS Collaboration are presented. The analyses are performed using proton-proton collision…
▽ More
Measurements of the top quark-antiquark pair production cross section, $σ_\mathrm{t\bar{t}}$, can be used to constrain the strong coupling constant, $α_{S}$, the top quark mass, $m_\mathrm{t}$, and the parton distribution functions (PDFs). In this poster, the two most recent relevant results published by the CMS Collaboration are presented. The analyses are performed using proton-proton collision data at a centre-of-mass energy of 13 TeV recorded by the CMS detector at the CERN LHC in 2016, corresponding to an integrated luminosity of $35.9~\mathrm{fb^{-1}}$. In the first one, $α_{S}$ and $m_\mathrm{t}$ are extracted independently from a measurement of the inclusive $σ_\mathrm{t\bar{t}}$, using next-to-next-to-leading order theoretical predictions. In the second, a measurement of the normalized triple-differential $\mathrm{t\bar{t}}$ cross section is performed; the result is then used together with HERA deep-inelastic scattering data to perform a simultaneous determination of $α_{S}$, $m_\mathrm{t}$, and the PDFs, at next-to-leading order. As a result, the uncertainty in the gluon PDF and its correlation with $α_{S}$ are significantly reduced at high parton momentum fraction, the kinematic range probed by $\mathrm{t\bar{t}}$ production. The result also yields the most precise determination of the top quark pole mass, to date.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
First experimental investigation of the running of the top quark mass
Authors:
Matteo M. Defranchis
Abstract:
The first experimental investigation of the running of the top quark mass is presented. The running, defined in the modified minimal subtraction ($\mathrm{\overline{MS}}$) renormalization scheme, is extracted from a measurement of the differential top quark-antiquark ($\mathrm{t\bar{t}}$) production cross section as a function of the invariant mass of the $\mathrm{t\bar{t}}$ system using theoretic…
▽ More
The first experimental investigation of the running of the top quark mass is presented. The running, defined in the modified minimal subtraction ($\mathrm{\overline{MS}}$) renormalization scheme, is extracted from a measurement of the differential top quark-antiquark ($\mathrm{t\bar{t}}$) production cross section as a function of the invariant mass of the $\mathrm{t\bar{t}}$ system using theoretical predictions at next-to-leading order. The measurement is performed using proton-proton collisions at a centre-of-mass energy of $13~\mathrm{TeV}$ recorded by the CMS detector at the CERN LHC in 2016, corresponding to an integrated luminosity of $35.9~\mathrm{fb^{-1}}$. Candidate $\mathrm{t\bar{t}}$ events are selected in the final state with an electron and a muon of opposite charge, and the differential cross section is determined at the parton level by means of a maximum-likelihood fit to multidifferential distributions. The extracted running is found to be compatible with the solution of the corresponding renormalization group equation, up to a scale on the order of $1~\mathrm{TeV}$.
△ Less
Submitted 17 January, 2020; v1 submitted 14 January, 2020;
originally announced January 2020.
-
Measurements of the inclusive $\rm t\bar{t}$ production cross section at the ATLAS and CMS experiments
Authors:
Matteo M. Defranchis
Abstract:
The results of the most recent measurements of the inclusive $\mathrm{t\bar{t}}$ cross section performed by the ATLAS and CMS experiments at the CERN LHC are summarized. These include results obtained in proton-proton collisions at different centre-of-mass energies, and the first observation of $\mathrm{t\bar{t}}$ production in proton-lead collisions. A new result at $\sqrt{s} = 13~\mathrm{TeV}$ b…
▽ More
The results of the most recent measurements of the inclusive $\mathrm{t\bar{t}}$ cross section performed by the ATLAS and CMS experiments at the CERN LHC are summarized. These include results obtained in proton-proton collisions at different centre-of-mass energies, and the first observation of $\mathrm{t\bar{t}}$ production in proton-lead collisions. A new result at $\sqrt{s} = 13~\mathrm{TeV}$ by the CMS Collaboration is presented for the first time at this conference. In this analysis, the total cross section is determined both for a fixed top quark mass value in the simulation of $m_{\mathrm{t}}^{\mathrm{MC}} = 172.5~\mathrm{GeV}$, and simultaneously with $m_{\mathrm{t}}^{\mathrm{MC}}$.
△ Less
Submitted 30 January, 2019;
originally announced January 2019.
