-
An arm length stabilization system for KAGRA and future gravitational-wave detectors
Authors:
T. Akutsu,
M. Ando,
K. Arai,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
Y. Aso,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
H. Chu,
Y-K. Chu,
K. Doi,
S. Eguchi,
Y. Enomoto
, et al. (181 additional authors not shown)
Abstract:
Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh…
▽ More
Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.
△ Less
Submitted 28 November, 2019; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Application of the independent component analysis to the iKAGRA data
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
H. Chu,
Y-K. Chu
, et al. (227 additional authors not shown)
Abstract:
We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform…
▽ More
We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.
△ Less
Submitted 1 June, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
L. Baiotti,
M. A. Barton,
K. Cannon,
E. Capocasa,
C-S. Chen,
T-W. Chiu,
K. Cho,
Y-K. Chu,
K. Craig,
W. Creus,
K. Doi,
K. Eda
, et al. (179 additional authors not shown)
Abstract:
KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic…
▽ More
KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors.
△ Less
Submitted 11 January, 2019;
originally announced January 2019.
-
KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector
Authors:
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
L. Baiotti,
M. A. Barton,
K. Cannon,
E. Capocasa,
C-S. Chen,
T-W. Chiu,
K. Cho,
Y-K. Chu,
K. Craig,
W. Creus,
K. Doi,
K. Eda,
Y. Enomoto
, et al. (169 additional authors not shown)
Abstract:
The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel…
▽ More
The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate.
△ Less
Submitted 20 November, 2018;
originally announced November 2018.
-
Measurement of optical losses in a high-finesse 300 m filter cavity for broadband quantum noise reduction in gravitational-wave detectors
Authors:
Eleonora Capocasa,
Yuefan Guo,
Marc Eisenmann,
Yuhang Zhao,
Akihiro Tomura,
Koji Arai,
Yoichi Aso,
Manuel Marchiò,
Laurent Pinard,
Pierre Prat,
Kentaro Somiya,
Roman Schnabel,
Matteo Tacca,
Ryutaro Takahashi,
Daisuke Tatsumi,
Matteo Leonardi,
Matteo Barsuglia,
Raffaele Flaminio
Abstract:
Earth-based gravitational-wave detectors will be limited by quantum noise in a large part of their spectrum. The most promising technique to achieve a broadband reduction of such noise is the injection of a frequency dependent squeezed vacuum state from the output port of the detector, whit the squeeze angle rotated by the reflection off a Fabry-Perot filter cavity. One of the most important param…
▽ More
Earth-based gravitational-wave detectors will be limited by quantum noise in a large part of their spectrum. The most promising technique to achieve a broadband reduction of such noise is the injection of a frequency dependent squeezed vacuum state from the output port of the detector, whit the squeeze angle rotated by the reflection off a Fabry-Perot filter cavity. One of the most important parameters limiting the squeezing performance is represented by the optical losses of the filter cavity. We report here the operation of a 300 m filter cavity prototype installed at the National Astronomical Observatory of Japan (NAOJ). The cavity is designed to obtain a rotation of the squeeze angle below 100 Hz. After achieving the resonance of the cavity with a multi-wavelength technique, the round trip losses have been measured to be between 50 ppm and 90 ppm. This result demonstrates that with realistic assumption on the input squeeze factor and on the other optical losses, a quantum noise reduction of at least 4 dB in the frequency region dominated by radiation pressure can be achieved.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Construction of KAGRA: an Underground Gravitational Wave Observatory
Authors:
T. Akutsu,
M. Ando,
S. Araki,
A. Araya,
T. Arima,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
L. Baiotti,
M. A. Barton,
D. Chen,
K. Cho,
K. Craig,
R. DeSalvo,
K. Doi,
K. Eda,
Y. Enomoto,
R. Flaminio,
S. Fujibayashi,
Y. Fujii,
M. -K. Fujimoto,
M. Fukushima,
T. Furuhata
, et al. (202 additional authors not shown)
Abstract:
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet…
▽ More
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.
△ Less
Submitted 11 December, 2017; v1 submitted 30 November, 2017;
originally announced December 2017.
-
The status of KAGRA underground cryogenic gravitational wave telescope
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
M. A. Barton,
K. Cannon,
K. Craig,
W. Creus,
K. Doi,
K. Eda,
Y. Enomoto,
R. Flaminio,
Y. Fujii,
M. -K. Fujimoto,
T. Furuhata,
S. Haino,
K. Hasegawa,
K. Hashino,
K. Hayama,
S. Hirobayashi
, et al. (126 additional authors not shown)
Abstract:
KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial ph…
▽ More
KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
Guided Lock of a Suspended Optical Cavity Enhanced by a Higher Order Extrapolation
Authors:
Kiwamu Izumi,
Koji Arai,
Daisuke Tatsumi,
Ryutaro Takahashi,
Osamu Miyakawa,
Masa-Katsu Fujimoto
Abstract:
Lock acquisition of a suspended optical cavity can be a highly stochastic process and is therefore nontrivial. Guided lock is a method to make lock acquisition less stochastic by decelerating the motion of the cavity length based on an extrapolation of the motion from an instantaneous velocity measurement. We propose an improved scheme which is less susceptible to seismic disturbances by incorpora…
▽ More
Lock acquisition of a suspended optical cavity can be a highly stochastic process and is therefore nontrivial. Guided lock is a method to make lock acquisition less stochastic by decelerating the motion of the cavity length based on an extrapolation of the motion from an instantaneous velocity measurement. We propose an improved scheme which is less susceptible to seismic disturbances by incorporating the acceleration as a higher order correction in the extrapolation. We implemented the new scheme in a 300-m suspended Fabry-Perot cavity and improved the success rate of lock acquisition by a factor of 30.
△ Less
Submitted 5 April, 2017;
originally announced April 2017.
-
Interferometer design of the KAGRA gravitational wave detector
Authors:
Yoichi Aso,
Yuta Michimura,
Kentaro Somiya,
Masaki Ando,
Osamu Miyakawa,
Takanori Sekiguchi,
Daisuke Tatsumi,
Hiroaki Yamamoto
Abstract:
KAGRA is a cryogenic interferometric gravitational wave detector being constructed at the underground site of Kamioka mine in Gifu prefecture, Japan. We performed an optimization of the interferomter design, to achieve the best sensitivity and a stable operation, with boundary conditions of classical noises and under various practical constraints, such as the size of the tunnel or the mirror cooli…
▽ More
KAGRA is a cryogenic interferometric gravitational wave detector being constructed at the underground site of Kamioka mine in Gifu prefecture, Japan. We performed an optimization of the interferomter design, to achieve the best sensitivity and a stable operation, with boundary conditions of classical noises and under various practical constraints, such as the size of the tunnel or the mirror cooling capacity. Length and alignment sensing schemes for the robust control of the interferometer are developed. In this paper, we describe the detailed design of the KAGRA interferometer as well as the reasoning behind design choices.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector
Authors:
Takashi Uchiyama,
Shinji Miyoki,
Souichi Telada,
Kazuhiro Yamamoto,
Masatake Ohashi,
Kazuhiro Agatsuma,
Koji Arai,
Masa-Katsu Fujimoto,
Tomiyoshi Haruyama,
Seiji Kawamura,
Osamu Miyakawa,
Naoko Ohishi,
Takanori Saito,
Takakazu Shintomi,
Toshikazu Suzuki,
Ryutaro Takahashi,
Daisuke Tatsumi
Abstract:
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17\,K and 18\,K. The detector sensitivity, which was limited by the mirror's…
▽ More
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17\,K and 18\,K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90\,Hz to 240\,Hz by cooling the mirrors. The improved sensitivity reached a maximum of $2.2 \times 10^{-19}\,\textrm{m}/\sqrt{\textrm{Hz}}$ at 165\,Hz.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
-
Prospects for true calorimetry on Kerr black holes in core-collapse supernovae and mergers
Authors:
Maurice H. P. M. van Putten,
Nobuyuki Kanda,
Hideyuki Tagoshi,
Daisuke Tatsumi,
Fujimoto Masa-Katsu,
Massimo Della Valle
Abstract:
Observational evidence for black hole spin down has been found in the normalized light curves of long GRBs in the BATSE catalogue. Over the duration $T_{90}$ of the burst, matter swept up by the central black hole is susceptible to non-axisymmetries producing gravitational radiation with a negative chirp. A time sliced matched filtering method is introduced to capture phase-coherence on intermedia…
▽ More
Observational evidence for black hole spin down has been found in the normalized light curves of long GRBs in the BATSE catalogue. Over the duration $T_{90}$ of the burst, matter swept up by the central black hole is susceptible to non-axisymmetries producing gravitational radiation with a negative chirp. A time sliced matched filtering method is introduced to capture phase-coherence on intermediate timescales, $τ$, here tested by injection of templates into experimental strain noise, $h_n(t)$. For TAMA 300, $h_n(f)\simeq 10^{-21}$ Hz$^{-\frac{1}{2}}$ at $f=1$ kHz gives a sensitivity distance for a reasonably accurate extraction of the trajectory in the time frequency domain of about $D\simeq 0.07-0.10$ Mpc for spin fown of black holes of mass $M=10-12M_\odot$ with $τ=1$ s. Extrapolation to advanced detectors implies $D\simeq 35-50$ Mpc for $h_n(f)\simeq 2\times 10^{-24}$ Hz$^{-\frac{1}{2}}$ around 1 kHz, which will open a new window to rigorous calorimetry on Kerr black holes.
△ Less
Submitted 4 January, 2011;
originally announced January 2011.
-
Thermal-noise-limited underground interferometer CLIO
Authors:
Kazuhiro Agatsuma,
Koji Arai,
Masa-Katsu Fujimoto,
Seiji Kawamura,
Kazuaki Kuroda,
Osamu Miyakawa,
Shinji Miyoki,
Masatake Ohashi,
Toshikazu Suzuki,
Ryutaro Takahashi,
Daisuke Tatsumi,
Souichi Telada,
Takashi Uchiyama,
Kazuhiro Yamamoto,
CLIO collaborators
Abstract:
We report on the current status of CLIO (Cryogenic Laser Interferometer Observatory), which is a prototype interferometer for LCGT (Large Scale Cryogenic Gravitational-Wave Telescope). LCGT is a Japanese next-generation interferometric gravitational wave detector featuring the use of cryogenic mirrors and a quiet underground site. The main purpose of CLIO is to demonstrate a reduction of the mir…
▽ More
We report on the current status of CLIO (Cryogenic Laser Interferometer Observatory), which is a prototype interferometer for LCGT (Large Scale Cryogenic Gravitational-Wave Telescope). LCGT is a Japanese next-generation interferometric gravitational wave detector featuring the use of cryogenic mirrors and a quiet underground site. The main purpose of CLIO is to demonstrate a reduction of the mirror thermal noise by cooling the sapphire mirrors. CLIO is located in an underground site of the Kamioka mine, 1000 m deep from the mountain top, to verify its advantages. After a few years of commissioning work, we have achieved a thermal-noise-limited sensitivity at room temperature. One of the main results of noise hunting was the elimination of thermal noise caused by a conductive coil-holder coupled with a pendulum through magnets.
△ Less
Submitted 29 January, 2010; v1 submitted 16 November, 2009;
originally announced November 2009.
-
Effect of energy deposited by cosmic-ray particles on interferometric gravitational wave detectors
Authors:
Kazuhiro Yamamoto,
Hideaki Hayakawa,
Atsushi Okada,
Takashi Uchiyama,
Shinji Miyoki,
Masatake Ohashi,
Kazuaki Kuroda,
Nobuyuki Kanda,
Daisuke Tatsumi,
Yoshiki Tsunesada
Abstract:
We investigated the noise of interferometric gravitational wave detectors due to heat energy deposited by cosmic-ray particles. We derived a general formula that describes the response of a mirror against a cosmic-ray passage. We found that there are differences in the comic-ray responses (the dependence of temperature and cosmic-ray track position) in cases of interferometric and resonant gravi…
▽ More
We investigated the noise of interferometric gravitational wave detectors due to heat energy deposited by cosmic-ray particles. We derived a general formula that describes the response of a mirror against a cosmic-ray passage. We found that there are differences in the comic-ray responses (the dependence of temperature and cosmic-ray track position) in cases of interferometric and resonant gravitational wave detectors. The power spectral density of vibrations caused by low-energy secondary muons is 100-times smaller than the goal sensitivity of future second-generation interferometer projects, such as LCGT and Advanced LIGO. The arrival frequency of high-energy cosmic-ray muons that generate enough large showers inside mirrors of LCGT and Advanced LIGO is one per a millennium. We also discuss the probability of exotic-particle detection with interferometers.
△ Less
Submitted 3 August, 2008; v1 submitted 15 May, 2008;
originally announced May 2008.
-
Current status of the CLIO project
Authors:
K Yamamoto,
T Uchiyama,
S Miyoki,
M Ohashi,
K Kuroda,
H Ishitsuka,
T Akutsu,
S Telada,
T Tomaru,
T Suzuki,
N Sato,
Y Saito,
Y Higashi,
T Haruyama,
A Yamamoto,
T Shintomi,
D Tatsumi,
M Ando,
H Tagoshi,
N Kanda,
N Awaya,
S Yamagishi,
H Takahashi,
A Araya,
A Takamori
, et al. (5 additional authors not shown)
Abstract:
CLIO (Cryogenic Laser Interferometer Observatory) is a Japanese gravitational wave detector project. One of the main purposes of CLIO is to demonstrate thermal-noise suppression by cooling mirrors for a future Japanese project, LCGT (Large-scale Cryogenic Gravitational Telescope). The CLIO site is in Kamioka mine, as is LCGT. The progress of CLIO between 2005 and 2007 (room- and cryogenic-temper…
▽ More
CLIO (Cryogenic Laser Interferometer Observatory) is a Japanese gravitational wave detector project. One of the main purposes of CLIO is to demonstrate thermal-noise suppression by cooling mirrors for a future Japanese project, LCGT (Large-scale Cryogenic Gravitational Telescope). The CLIO site is in Kamioka mine, as is LCGT. The progress of CLIO between 2005 and 2007 (room- and cryogenic-temperature experiments) is introduced in this article. In a room-temperature experiment, we made efforts to improve the sensitivity. The current best sensitivity at 300 K is about $6 \times 10^{-21} /\sqrt{\rm Hz}$ around 400 Hz. Below 20 Hz, the strain (not displacement) sensitivity is comparable to that of LIGO, although the baselines of CLIO are 40-times shorter (CLIO: 100m, LIGO: 4km). This is because seismic noise is extremely small in Kamioka mine. We operated the interferometer at room temperature for gravitational wave observations. We obtained 86 hours of data. In the cryogenic experiment, it was confirmed that the mirrors were sufficiently cooled (14 K). However, we found that the radiation shield ducts transferred 300K radiation into the cryostat more effectively than we had expected. We observed that noise caused by pure aluminum wires to suspend a mirror was suppressed by cooling the mirror.
△ Less
Submitted 15 May, 2008;
originally announced May 2008.
-
Search for a stochastic background of 100-MHz gravitational waves with laser interferometers
Authors:
Tomotada Akutsu,
Seiji Kawamura,
Atsushi Nishizawa,
Koji Arai,
Kazuhiro Yamamoto,
Daisuke Tatsumi,
Shigeo Nagano,
Erina Nishida,
Takeshi Chiba,
Ryuichi Takahashi,
Naoshi Sugiyama,
Mitsuhiro Fukushima,
Toshitaka Yamazaki,
Masa-Katsu Fujimoto
Abstract:
This letter reports the results of a search for a stochastic background of gravitational waves (GW) at 100 MHz by laser interferometry. We have developed a GW detector, which is a pair of 75-cm baseline synchronous recycling (resonant recycling) interferometers. Each interferometer has a strain sensitivity of ~ 10^{-16} Hz^{-1/2} at 100 MHz. By cross-correlating the outputs of the two interferom…
▽ More
This letter reports the results of a search for a stochastic background of gravitational waves (GW) at 100 MHz by laser interferometry. We have developed a GW detector, which is a pair of 75-cm baseline synchronous recycling (resonant recycling) interferometers. Each interferometer has a strain sensitivity of ~ 10^{-16} Hz^{-1/2} at 100 MHz. By cross-correlating the outputs of the two interferometers within 1000 seconds, we found h_{100}^2 Omega_{gw} < 6 times 10^{25} to be an upper limit on the energy density spectrum of the GW background in a 2-kHz bandwidth around 100 MHz, where a flat spectrum is assumed.
△ Less
Submitted 9 August, 2008; v1 submitted 28 March, 2008;
originally announced March 2008.
-
Optimal Location of Two Laser-interferometric Detectors for Gravitational Wave Backgrounds at 100 MHz
Authors:
Atsushi Nishizawa,
Seiji Kawamura,
Tomotada Akutsu,
Koji Arai,
Kazuhiro Yamamoto,
Daisuke Tatsumi,
Erina Nishida,
Masa-aki Sakagami,
Takeshi Chiba,
Ryuichi Takahashi,
Naoshi Sugiyama
Abstract:
Recently, observational searches for gravitational wave background (GWB) have been developed and given constraints on the energy density of GWB in a broad range of frequencies. These constraints have already resulted in the rejection of some theoretical models of relatively large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though an indirect limit ex…
▽ More
Recently, observational searches for gravitational wave background (GWB) have been developed and given constraints on the energy density of GWB in a broad range of frequencies. These constraints have already resulted in the rejection of some theoretical models of relatively large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though an indirect limit exists due to He4 abundance due to big-bang nucleosynthesis. In our previous paper, we investigated the detector designs that can effectively respond to GW at high frequencies, where the wavelength of GW is comparable to the size of a detector, and found that the configuration, a so-called synchronous-recycling interferometer is best at these sensitivity. In this paper, we investigated the optimal location of two synchronous-recycling interferometers and derived their cross-correlation sensitivity to GWB. We found that the sensitivity is nearly optimized and hardly changed if two coaligned detectors are located within a range 0.2 m, and that the sensitivity achievable in an experiment is far below compared with the constraint previously obtained in experiments.
△ Less
Submitted 27 January, 2008;
originally announced January 2008.
-
Laser-interferometric Detectors for Gravitational Wave Background at 100 MHz : Detector Design and Sensitivity
Authors:
Atsushi Nishizawa,
Seiji Kawamura,
Tomotada Akutsu,
Koji Arai,
Kazuhiro Yamamoto,
Daisuke Tatsumi,
Erina Nishida,
Masa-aki Sakagami,
Takeshi Chiba,
Ryuichi Takahashi,
Naoshi Sugiyama
Abstract:
Recently, observational searches for gravitational wave background (GWB) have developed and given direct and indirect constraints on the energy density of GWB in a broad range of frequencies. These constraints have already rejected some theoretical models of large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though the indirect limit by He4 abundance…
▽ More
Recently, observational searches for gravitational wave background (GWB) have developed and given direct and indirect constraints on the energy density of GWB in a broad range of frequencies. These constraints have already rejected some theoretical models of large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though the indirect limit by He4 abundance due to big-bang nucleosynthesis exists. In this paper, we propose an experiment with laser interferometers searching GWB at 100 MHz. We considered three detector designs and evaluated the GW response functions of a single detector. As a result, we found that, at 100 MHz, the most sensitive detector is the design, a so-called synchronous recycling interferometer, which has better sensitivity than an ordinary Fabry-Perot Michelson interferometer by a factor of 3.3 at 100 MHz. We also give the best sensitivity achievable at 100 MHz with realistic experimental parameters.
△ Less
Submitted 30 January, 2008; v1 submitted 10 October, 2007;
originally announced October 2007.
-
Current status of Japanese detectors
Authors:
Daisuke Tatsumi,
Ryutaro Takahashi,
Koji Arai,
Noriyasu Nakagawa,
Kazuhiro Agatsuma,
Toshitaka Yamazaki,
Mitsuhiro Fukushima,
Masa-Katsu Fujimoto,
Akiteru Takamori,
Alessandro Bertolini,
Virginio Sannibale,
Riccardo DeSalvo,
Szabolcs Marka,
Masaki Ando,
Kimio Tsubono,
Tomomi Akutsu,
Kazuhiro Yamamoto,
Hideki Ishitsuka,
Takashi Uchiyama,
Shinji Miyoki,
Masatake Ohashi,
Kazuaki Kuroda,
Norichika Awaya,
Nobuyuki Kanda,
Akito Araya
, et al. (7 additional authors not shown)
Abstract:
Current status of TAMA and CLIO detectors in Japan is reported in this article. These two interferometric gravitational-wave detectors are being developed for the large cryogenic gravitational wave telescope (LCGT) which is a future plan for detecting gravitational wave signals at least once per year.
TAMA300 is being upgraded to improve the sensitivity in low frequency region after the last o…
▽ More
Current status of TAMA and CLIO detectors in Japan is reported in this article. These two interferometric gravitational-wave detectors are being developed for the large cryogenic gravitational wave telescope (LCGT) which is a future plan for detecting gravitational wave signals at least once per year.
TAMA300 is being upgraded to improve the sensitivity in low frequency region after the last observation experiment in 2004. To reduce the seismic noises, we are installing new seismic isolation system, which is called TAMA Seismic Attenuation System, for the four test masses. We confirmed stable mass locks of a cavity and improvements of length and angular fluctuations by using two SASs. We are currently optimizing the performance of the third and fourth SASs. We continue TAMA300 operation and R&D studies for LCGT. Next data taking in the summer of 2007 is planned.
CLIO is a 100-m baseline length prototype detector for LCGT to investigate interferometer performance in cryogenic condition. The key features of CLIO are that it locates Kamioka underground site for low seismic noise level, and adopts cryogenic Sapphire mirrors for low thermal noise level. The first operation of the cryogenic interferometer was successfully demonstrated in February of 2006. Current sensitivity at room temperature is close to the target sensitivity within a factor of 4. Several observation experiments at room temperature have been done. Once the displacement noise reaches at thermal noise level of room temperature, its improvement by cooling test mass mirrors should be demonstrated.
△ Less
Submitted 22 April, 2007;
originally announced April 2007.
-
Plans for the LIGO-TAMA Joint Search for Gravitational Wave Bursts
Authors:
Patrick J. Sutton,
Masaki Ando,
Patrick Brady,
Laura Cadonati,
Alessandra Di Credico,
Stephen Fairhurst,
Lee Samuel Finn,
Nobuyuki Kanda,
Erik Katsavounidis,
Sergey Klimenko,
Albert Lazzarini,
Szabolcs Marka,
John W. C. McNabb,
Saikat Ray Majumder,
Peter R. Saulson,
Hideyuki Tagoshi,
Hirotaka Takahashi,
Ryutaro Takahashi,
Daisuke Tatsumi,
Yoshiki Tsunesada,
S. E. Whitcomb
Abstract:
We describe the plans for a joint search for unmodelled gravitational wave bursts being carried out by the LIGO and TAMA collaborations using data collected during February-April 2003. We take a conservative approach to detection, requiring candidate gravitational wave bursts to be seen in coincidence by all four interferometers. We focus on some of the complications of performing this coinciden…
▽ More
We describe the plans for a joint search for unmodelled gravitational wave bursts being carried out by the LIGO and TAMA collaborations using data collected during February-April 2003. We take a conservative approach to detection, requiring candidate gravitational wave bursts to be seen in coincidence by all four interferometers. We focus on some of the complications of performing this coincidence analysis, in particular the effects of the different alignments and noise spectra of the interferometers.
△ Less
Submitted 28 December, 2004;
originally announced December 2004.
-
Observation results by the TAMA300 detector on gravitational wave bursts from stellar-core collapses
Authors:
Masaki Ando,
Koji Arai,
Youichi Aso,
Peter Beyersdorf,
Kazuhiro Hayama,
Yukiyoshi Iida,
Nobuyuki Kanda,
Seiji Kawamura,
Kazuhiro Kondo,
Norikatsu Mio,
Shinji Miyoki,
Shigenori Moriwaki,
Shigeo Nagano,
Kenji Numata,
Shuichi Sato,
Kentaro Somiya,
Hideyuki Tagoshi,
Hirotaka Takahashi,
Ryutaro Takahashi,
Daisuke Tatsumi,
Yoshiki Tsunesada,
Zong-Hong Zhu
Abstract:
We present data-analysis schemes and results of observations with the TAMA300 gravitational-wave detector, targeting burst signals from stellar-core collapse events. In analyses for burst gravitational waves, the detection and fake-reduction schemes are different from well-investigated ones for a chirp-wave analysis, because precise waveform templates are not available. We used an excess-power f…
▽ More
We present data-analysis schemes and results of observations with the TAMA300 gravitational-wave detector, targeting burst signals from stellar-core collapse events. In analyses for burst gravitational waves, the detection and fake-reduction schemes are different from well-investigated ones for a chirp-wave analysis, because precise waveform templates are not available. We used an excess-power filter for the extraction of gravitational-wave candidates, and developed two methods for the reduction of fake events caused by non-stationary noises of the detector. These analysis schemes were applied to real data from the TAMA300 interferometric gravitational wave detector. As a result, fake events were reduced by a factor of about 1000 in the best cases. The resultant event candidates were interpreted from an astronomical viewpoint. We set an upper limit of 2.2x10^3 events/sec on the burst gravitational-wave event rate in our Galaxy with a confidence level of 90%. This work sets a milestone and prospects on the search for burst gravitational waves, by establishing an analysis scheme for the observation data from an interferometric gravitational wave detector.
△ Less
Submitted 5 November, 2004;
originally announced November 2004.
-
On Detection of Black Hole Quasi-Normal Ringdowns: Detection Efficiency and Waveform Parameter Determination in Matched Filtering
Authors:
Yoshiki Tsunesada,
Nobuyuki Kanda,
Hiroyuki Nakano,
Daisuke Tatsumi,
Masaki Ando,
Misao Sasaki,
Hideyuki Tagoshi,
Hirotaka Takahashi
Abstract:
Gravitational radiation from a slightly distorted black hole with ringdown waveform is well understood in general relativity. It provides a probe for direct observation of black holes and determination of their physical parameters, masses and angular momenta (Kerr parameters). For ringdown searches using data of gravitational wave detectors, matched filtering technique is useful. In this paper,…
▽ More
Gravitational radiation from a slightly distorted black hole with ringdown waveform is well understood in general relativity. It provides a probe for direct observation of black holes and determination of their physical parameters, masses and angular momenta (Kerr parameters). For ringdown searches using data of gravitational wave detectors, matched filtering technique is useful. In this paper, we describe studies on problems in matched filtering analysis in realistic gravitational wave searches using observational data. Above all, we focus on template constructions, matches or signal-to-noise ratios (SNRs), detection probabilities for Galactic events, and accuracies in evaluation of waveform parameters or black hole hairs. We have performed matched filtering analysis for artificial ringdown signals which are generated with Monte-Carlo technique and injected into the TAMA300 observational data. It is shown that with TAMA300 sensitivity, the detection probability for Galactic ringdown events is about 50% for black holes of masses greater than $20 M_{\odot}$ with SNR $> 10$. The accuracies in waveform parameter estimations are found to be consistent with the template spacings, and resolutions for black hole masses and the Kerr parameters are evaluated as a few % and $\sim 40 %$, respectively. They can be improved up to $< 0.9 %$ and $< 24 %$ for events of ${\rm SNR} \ge 10$ by using fine-meshed template bank in the hierarchical search strategy.
△ Less
Submitted 8 October, 2004;
originally announced October 2004.
-
Ultra-stable performance of an underground-based laser interferometer observatory for gravitational waves
Authors:
S. Sato,
S. Miyoki,
S. Telada,
D. Tatsumi,
A. Araya,
M. Ohashi,
Y. Totsuka,
M. Fukushima,
M. -K. Fujimoto
Abstract:
In order to detect the rare astrophysical events that generate gravitational wave (GW) radiation, sufficient stability is required for GW antennas to allow long-term observation. In practice, seismic excitation is one of the most common disturbances effecting stable operation of suspended-mirror laser interferometers. A straightforward means to allow more stable operation is therefore to locate…
▽ More
In order to detect the rare astrophysical events that generate gravitational wave (GW) radiation, sufficient stability is required for GW antennas to allow long-term observation. In practice, seismic excitation is one of the most common disturbances effecting stable operation of suspended-mirror laser interferometers. A straightforward means to allow more stable operation is therefore to locate the antenna, the ``observatory'', at a ``quiet'' site. A laser interferometer gravitational wave antenna with a baseline length of 20m (LISM) was developed at a site 1000m underground, near Kamioka, Japan. This project was a unique demonstration of a prototype laser interferometer for gravitational wave observation located underground. The extremely stable environment is the prime motivation for going underground. In this paper, the demonstrated ultra-stable operation of the interferometer and a well-maintained antenna sensitivity are reported.
△ Less
Submitted 18 March, 2004;
originally announced March 2004.
-
Force measurements of a superconducting-film actuator for a cryogenic interferometric gravitational-wave detector
Authors:
N. Sato,
T. Haruyama,
N. Kanda,
K. Kuroda,
S. Miyoki,
M. Ohashi,
Y. Saito,
T. Shintomi,
T. Suzuki,
D. Tatsumi,
C. Taylor,
T. Tomaru,
T. Uchiyama,
A. Yamamoto
Abstract:
We measured forces applied by an actuator with a YBCO film at near 77 K for the Large-scale Cryogenic Gravitational-wave Telescope (LCGT) project. An actuator consisting of both a YBCO film of 1.6 micrometers thickness and 0.81 square centimeters area and a solenoid coil exerted a force of up to 0.2 mN on a test mass. The presented actuator system can be used to displace the mirror of LCGT for f…
▽ More
We measured forces applied by an actuator with a YBCO film at near 77 K for the Large-scale Cryogenic Gravitational-wave Telescope (LCGT) project. An actuator consisting of both a YBCO film of 1.6 micrometers thickness and 0.81 square centimeters area and a solenoid coil exerted a force of up to 0.2 mN on a test mass. The presented actuator system can be used to displace the mirror of LCGT for fringe lock of the interferometer.
△ Less
Submitted 4 June, 2002;
originally announced June 2002.
-
Determining the Cosmic Equation of State Using Future Gravitational Wave Detectors
Authors:
Zong-Hong Zhu,
Masa-Katsu Fujimoto,
Daisuke Tatsumi
Abstract:
The expected chirp mass distribution of observed events for future gravitational wave detectors is extensively investigated in the presence of an exotic fluid component with an arbitrary equation of state, $-1 \leq ω_x \equiv p_x/ρ_x < 0$, i.e., the so-called dark energy component. The results for a flat model dominated by a dark energy are compared to those for the standard flat model dominated…
▽ More
The expected chirp mass distribution of observed events for future gravitational wave detectors is extensively investigated in the presence of an exotic fluid component with an arbitrary equation of state, $-1 \leq ω_x \equiv p_x/ρ_x < 0$, i.e., the so-called dark energy component. The results for a flat model dominated by a dark energy are compared to those for the standard flat model dominated by cold dark matter. It is found that for a flat universe the chirp mass distribution shows a sensitive dependence on $ω_x$, which may provide an independent and robust constraint on the cosmic equation of state.
△ Less
Submitted 13 July, 2001;
originally announced July 2001.
-
Cryogenic measurement of the optical absorption coefficient in sapphire crystals at 1.064(micro)m for the Large-scale Cryogenic Gravitational wave Telescope
Authors:
Takayuki Tomaru,
Takashi Uchiyama,
Daisuke Tatsumi,
Shinji Miyoki,
Masatake Ohashi,
Kazuaki Kuroda,
Toshikazu Suzuki,
Akira Yamamoto,
Takakazu Shintomi
Abstract:
We have applied laser calorimetry to the measurement of optical absorption in mono-crystalline sapphire at cryogenic temperatures. Sapphire is a promising candidate for the mirror substrates of the Large-scale Cryogenic Gravitational wave Telescope. The optical absorption coefficients of different sapphire samples at a wavelength of 1.064(micro)m at 5K were found to average 90ppm/cm.
We have applied laser calorimetry to the measurement of optical absorption in mono-crystalline sapphire at cryogenic temperatures. Sapphire is a promising candidate for the mirror substrates of the Large-scale Cryogenic Gravitational wave Telescope. The optical absorption coefficients of different sapphire samples at a wavelength of 1.064(micro)m at 5K were found to average 90ppm/cm.
△ Less
Submitted 8 March, 2001; v1 submitted 17 January, 2001;
originally announced January 2001.
-
The First Search for Gravitational Waves from Inspiraling Compact Binaries using TAMA300 data
Authors:
Hideyuki Tagoshi,
Nobuyuki Kanda,
Takahiro Tanaka,
Daisuke Tatsumi,
Souichi Telada
Abstract:
We analyzed 6 hours of data from the TAMA300 detector by matched filtering, searching for gravitational waves from inspiraling compact binaries. We incorporated a two-step hierarchical search strategy in matched filtering. We obtained an upper limit of 0.59/hour (C.L.=90%) on the event rate of inspirals of compact binaries with mass between 0.3M_solar and 10M_solar and with signal-to-noise ratio…
▽ More
We analyzed 6 hours of data from the TAMA300 detector by matched filtering, searching for gravitational waves from inspiraling compact binaries. We incorporated a two-step hierarchical search strategy in matched filtering. We obtained an upper limit of 0.59/hour (C.L.=90%) on the event rate of inspirals of compact binaries with mass between 0.3M_solar and 10M_solar and with signal-to-noise ratio greater than 7.2. The distance of 1.4M_solar (0.5M_solar) binaries which produce the signal-to-noise ratio 7.2 was estimated to be 6.2kpc (2.9kpc) when the position of the source on the sky and the inclination angle of the binaries were optimal.
△ Less
Submitted 4 December, 2000;
originally announced December 2000.
-
Mechanical quality factor of a sapphire fiber at cryogenic temperatures
Authors:
T. Uchiyama,
T. Tomaru,
D. Tatsumi,
S. Miyoki,
M. Ohashi,
K. Kuroda,
T. Suzuki,
A. Yamamoto,
T. Shintomi
Abstract:
A mechanical quality factor of $1.1 \times 10^{7}$ was obtained for the 199 Hz bending vibrational mode in a monocrystalline sapphire fiber at 6 K. Consequently, we confirm that pendulum thermal noise of cryogenic mirrors used for gravitational wave detectors can be reduced by the sapphire fiber suspension.
A mechanical quality factor of $1.1 \times 10^{7}$ was obtained for the 199 Hz bending vibrational mode in a monocrystalline sapphire fiber at 6 K. Consequently, we confirm that pendulum thermal noise of cryogenic mirrors used for gravitational wave detectors can be reduced by the sapphire fiber suspension.
△ Less
Submitted 27 July, 2000;
originally announced July 2000.
