-
Precision measurements of the magnetic parameters of LISA Pathfinder test masses
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M De Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
A precise characterization of the magnetic properties of LISA Pathfinder free falling test-masses is of special interest for future gravitational wave observatory in space. Magnetic forces have an important impact on the instrument sensitivity in the low frequency regime below the millihertz. In this paper we report on the magnetic injection experiments performed throughout LISA Pathfinder operati…
▽ More
A precise characterization of the magnetic properties of LISA Pathfinder free falling test-masses is of special interest for future gravitational wave observatory in space. Magnetic forces have an important impact on the instrument sensitivity in the low frequency regime below the millihertz. In this paper we report on the magnetic injection experiments performed throughout LISA Pathfinder operations. We show how these experiments allowed a high precision estimate of the instrument magnetic parameters. The remanent magnetic moment was found to have a modulus of $(0.245\pm0.081)\,\rm{nAm}^2$, the x-component of the background magnetic field within the test masses position was measured to be $(414 \pm 74)$ nT and its gradient had a value of $(-7.4\pm 2.1)\,μ$T/m. Finally, we also measured the test mass magnetic susceptibility to be $(-3.35\pm0.15)\times$10$^{-5}$ in the low frequency regime. All results are in agreement with on-ground estimates.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Magnetic-induced force noise in LISA Pathfinder free-falling test masses
Authors:
M Armano,
H Audley,
J Baird,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
A M Cruise,
K Danzmann,
M De Deus Silva,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli,
V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini,
F Gibert,
R Giusteri,
C Grimani,
J Grzymisch
, et al. (53 additional authors not shown)
Abstract:
LISA Pathfinder was a mission designed to test key technologies required for gravitational wave detection in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime, which corresponds to the measurement band of interest for future space-borne gravitational wave observatories. Magnetic-induced forces couple to the test mass motion, introducing a c…
▽ More
LISA Pathfinder was a mission designed to test key technologies required for gravitational wave detection in space. Magnetically driven forces play a key role in the instrument sensitivity in the low-frequency regime, which corresponds to the measurement band of interest for future space-borne gravitational wave observatories. Magnetic-induced forces couple to the test mass motion, introducing a contribution to the relative acceleration noise between the free falling test masses. In this Letter we present the first complete estimate of this term of the instrument performance model. Our results set the magnetic-induced acceleration noise during the February 2017 noise run of $\rm 0.25_{-0.08}^{+0.15}\,fm\,s^{-2}/\sqrt{Hz}$ at 1 mHz and $\rm 1.01_{-0.24}^{+0.73}\, fm\,s^{-2}/\sqrt{Hz}$ at 0.1 mHz. We also discuss how the non-stationarities of the interplanetary magnetic field can affect these values during extreme space weather conditions.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
NanoNewton electrostatic force actuators for femtoNewton-sensitive measurements: system performance test in the LISA Pathfinder mission
Authors:
M Armano,
H Audley,
J Baird,
M Bassan,
P Binetruy,
M Born,
D Bortoluzzi,
E Castelli,
A Cavalleri,
A Cesarini,
V Chiavegato,
A M Cruise,
D Dal Bosco,
K Danzmann,
M De Deus Silva,
R De Rosa,
L Di Fiore,
I Diepholz,
G Dixon,
R Dolesi,
L Ferraioli V Ferroni,
E D Fitzsimons,
M Freschi,
L Gesa,
D Giardini
, et al. (65 additional authors not shown)
Abstract:
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to le…
▽ More
Electrostatic force actuation is a key component of the system of geodesic reference test masses (TM) for the LISA orbiting gravitational wave observatory and in particular for performance at low frequencies, below 1 mHz, where the observatory sensitivity is limited by stray force noise. The system needs to apply forces of order 10$^{-9}$ N while limiting fluctuations in the measurement band to levels approaching 10$^{-15}$ N/Hz$^{1/2}$. We present here the LISA actuation system design, based on audio-frequency voltage carrier signals, and results of its in-flight performance test with the LISA Pathfinder test mission. In LISA, TM force actuation is used to align the otherwise free-falling TM to the spacecraft-mounted optical metrology system, without any forcing along the critical gravitational wave-sensitive interferometry axes. In LISA Pathfinder, on the other hand, the actuation was used also to stabilize the TM along the critical $x$ axis joining the two TM, with the commanded actuation force entering directly into the mission's main differential acceleration science observable. The mission allowed demonstration of the full compatibility of the electrostatic actuation system with the LISA observatory requirements, including dedicated measurement campaigns to amplify, isolate, and quantify the two main force noise contributions from the actuation system, from actuator gain noise and from low frequency ``in band'' voltage fluctuations. These campaigns have shown actuation force noise to be a relevant, but not dominant, noise source in LISA Pathfinder and have allowed performance projections for the conditions expected in the LISA mission.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
Glitch systematics on the observation of massive black-hole binaries with LISA
Authors:
Alice Spadaro,
Riccardo Buscicchio,
Daniele Vetrugno,
Antoine Klein,
Davide Gerosa,
Stefano Vitale,
Rita Dolesi,
William Joseph Weber,
Monica Colpi
Abstract:
Detecting and coherently characterizing thousands of gravitational-wave signals is a core data-analysis challenge for the Laser Interferometer Space Antenna (LISA). Transient artifacts, or "glitches", with disparate morphologies are expected to be present in the data, potentially affecting the scientific return of the mission. We present the first joint reconstruction of short-lived astrophysical…
▽ More
Detecting and coherently characterizing thousands of gravitational-wave signals is a core data-analysis challenge for the Laser Interferometer Space Antenna (LISA). Transient artifacts, or "glitches", with disparate morphologies are expected to be present in the data, potentially affecting the scientific return of the mission. We present the first joint reconstruction of short-lived astrophysical signals and noise artifacts. Our analysis is inspired by glitches observed by the LISA Pathfinder mission, including both acceleration and fast displacement transients. We perform full Bayesian inference using LISA time-delay interferometric data and gravitational waveforms describing mergers of massive black holes. We focus on a representative binary with a detector-frame total mass of $6 \times 10^7 M_\odot$ at redshift $5$, yielding a signal lasting $\sim 30~\mathrm{h}$ in the LISA sensitivity band. We explore two glitch models of different flexibility, namely a fixed parametric family and a shapelet decomposition. In the most challenging scenario, we report a complete loss of the gravitational-wave signal if the glitch is ignored; more modest glitches induce biases on the black-hole parameters. On the other hand, a joint inference approach fully sanitizes the reconstruction of both the astrophysical and the glitch signal. We also inject a variety of glitch morphologies in isolation, without a superimposed gravitational signal, and show we can identify the correct transient model. Our analysis is an important step** stone toward a realistic treatment of LISA data in the context of the highly sought-after "global fit".
△ Less
Submitted 21 December, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Temperature stability in the sub-milliHertz band with LISA Pathfinder
Authors:
M. Armano,
H. Audley,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
E. Castelli,
A. Cavalleri,
A. Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
I. Diepholz,
G. Dixon,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
E. D. Fitzsimons,
M. Freschi,
L. Gesa,
F. Gibert,
D. Giardini,
R. Giusteri,
C. Grimani,
J. Grzymisch
, et al. (57 additional authors not shown)
Abstract:
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall acc…
▽ More
LISA Pathfinder (LPF) was a technology pioneering mission designed to test key technologies required for gravitational wave detection in space. In the low frequency regime (milli-Hertz and below), where space-based gravitational wave observatories will operate, temperature fluctuations play a crucial role since they can couple into the interferometric measurement and the test masses' free-fall accuracy in many ways. A dedicated temperature measurement subsystem, with noise levels in 10$\,μ$K$\,$Hz$^{-1/2}$ down to $1\,$mHz was part of the diagnostics unit on board LPF. In this paper we report on the temperature measurements throughout mission operations, characterize the thermal environment, estimate transfer functions between different locations and report temperature stability (and its time evolution) at frequencies as low as 10$\,μ$Hz, where typically values around $1\,$K$\,$Hz$^{-1/2}$ were measured.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Optimal design of calibration signals in space borne gravitational wave detectors
Authors:
M. Nofrarias,
N. Karnesis,
F. Gibert,
M. Armano,
H. Audley. K. Danzmann,
I. Diepholz,
R. Dolesi,
L. Ferraioli,
V. Ferroni,
M. Hewitson,
M. Hueller,
H. Inchauspe,
O. Jennrich,
N. Korsakova. P. W. McNamara,
E. Plagnol,
J. I. Thorpe,
D. Vetrugno,
S. Vitale,
P. Wass,
W. J. Weber
Abstract:
Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterisation of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter…
▽ More
Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterisation of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter estimation methods being used to determine the parameters describing the system. The relevance of experiment design is particularly significant for the LISA Pathfinder mission, which will spend most of its operation time performing experiments to characterise key technologies for future space borne gravitational wave observatories. Here we propose a framework to derive the optimal signals ---in terms of minimum parameter uncertainty--- to be injected to these instruments during its calibration phase. We compare our results with an alternative numerical algorithm which achieves an optimal input signal by iteratively improving an initial guess. We show agreement of both approaches when applied to the LISA Pathfinder case.
△ Less
Submitted 30 November, 2015;
originally announced November 2015.
-
Free-flight experiments in LISA Pathfinder
Authors:
M. Armano,
H. Audley,
G. Auger,
J. Baird,
P. Binetruy,
M. Born,
D. Bortoluzzi,
N. Brandt,
A. Bursi,
M. Caleno,
A. Cavalleri,
A. Cesarini,
M. Cruise,
C. Cutler,
K. Danzmann,
I. Diepholz,
R. Dolesi,
N. Dunbar,
L. Ferraioli,
V. Ferroni,
E. Fitzsimons,
M. Freschi,
J. Gallegos,
C. Garcia. Marirrodriga,
R. Gerndt
, et al. (67 additional authors not shown)
Abstract:
The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is co…
▽ More
The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is contained within the same spacecraft, it is necessary to apply forces on it to maintain its position and attitude relative to the spacecraft. These forces are a potential source of acceleration noise in the LISA Pathfinder system that are not present in the full LISA configuration. While LISA Pathfinder has been designed to meet it's primary mission requirements in the presence of this noise, recent estimates suggest that the on-orbit performance may be limited by this `suspension noise'. The drift-mode or free-flight experiments provide an opportunity to mitigate this noise source and further characterize the underlying disturbances that are of interest to the designers of LISA-like instruments. This article provides a high-level overview of these experiments and the methods under development to analyze the resulting data.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
-
Data series subtraction with unknown and unmodeled background noise
Authors:
Stefano Vitale,
Giuseppe Congedo,
Rita Dolesi,
Valerio Ferroni,
Mauro Hueller,
Daniele Vetrugno,
William Joseph Weber,
Heather Audley,
Karsten Danzmann,
Ingo Diepholz,
Martin Hewitson,
Natalia Korsakova,
Luigi Ferraioli,
Ferran Gibert,
Nikolaos Karnesis,
Miquel Nofrarias,
Henri Inchauspe,
Eric Plagnol,
Oliver Jennrich,
Paul W. McNamara,
Michele Armano,
James Ira Thorpe,
Peter Wass
Abstract:
LISA Pathfinder (LPF), ESA's precursor mission to a gravitational wave observatory, will measure the degree to which two test-masses can be put into free-fall, aiming to demonstrate a residual relative acceleration with a power spectral density (PSD) below 30 fm/s$^2$/Hz$^{1/2}$ around 1 mHz. In LPF data analysis, the measured relative acceleration data series must be fit to other various measured…
▽ More
LISA Pathfinder (LPF), ESA's precursor mission to a gravitational wave observatory, will measure the degree to which two test-masses can be put into free-fall, aiming to demonstrate a residual relative acceleration with a power spectral density (PSD) below 30 fm/s$^2$/Hz$^{1/2}$ around 1 mHz. In LPF data analysis, the measured relative acceleration data series must be fit to other various measured time series data. This fitting is required in different experiments, from system identification of the test mass and satellite dynamics to the subtraction of noise contributions from measured known disturbances. In all cases, the background noise, described by the PSD of the fit residuals, is expected to be coloured, requiring that we perform such fits in the frequency domain. This PSD is unknown {\it a priori}, and a high accuracy estimate of this residual acceleration noise is an essential output of our analysis. In this paper we present a fitting method based on Bayesian parameter estimation with an unknown frequency-dependent background noise. The method uses noise marginalisation in connection with averaged Welch's periodograms to achieve unbiased parameter estimation, together with a consistent, non-parametric estimate of the residual PSD. Additionally, we find that the method is equivalent to some implementations of iteratively re-weighted least-squares fitting. We have tested the method both on simulated data of known PSD, and to analyze differential acceleration from several experiments with the LISA Pathfinder end-to-end mission simulator.
△ Less
Submitted 4 August, 2014; v1 submitted 18 April, 2014;
originally announced April 2014.
-
State space modelling and data analysis exercises in LISA Pathfinder
Authors:
M Nofrarias,
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
J Bogenstahl,
D Bortoluzzi,
N Brandt,
M Caleno,
A Cavalleri,
G Congedo,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon,
R Dolesi,
N Dunbar,
J Fauste,
L Ferraioli,
V Ferroni W Fichter,
E Fitzsimons
, et al. (61 additional authors not shown)
Abstract:
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission an…
▽ More
LISA Pathfinder is a mission planned by the European Space Agency to test the key technologies that will allow the detection of gravitational waves in space. The instrument on-board, the LISA Technology package, will undergo an exhaustive campaign of calibrations and noise characterisation campaigns in order to fully describe the noise model. Data analysis plays an important role in the mission and for that reason the data analysis team has been develo** a toolbox which contains all the functionalities required during operations. In this contribution we give an overview of recent activities, focusing on the improvements in the modelling of the instrument and in the data analysis campaigns performed both with real and simulated data.
△ Less
Submitted 21 June, 2013; v1 submitted 19 June, 2013;
originally announced June 2013.
-
Space-borne gravitational wave detectors as time-delayed differential dynamometers
Authors:
Giuseppe Congedo,
Rita Dolesi,
Mauro Hueller,
Stefano Vitale,
William J. Weber
Abstract:
The basic constituent of many space-borne gravitational missions, in particular for interferometric gravitational waves detectors, is the so-called link made out of a satellite sending an electromagnetic beam to a second satellite. We illustrate how, by measuring the time derivative of the frequency of the received beam, the link behaves as a differential, time-delayed dynamometer in which the eff…
▽ More
The basic constituent of many space-borne gravitational missions, in particular for interferometric gravitational waves detectors, is the so-called link made out of a satellite sending an electromagnetic beam to a second satellite. We illustrate how, by measuring the time derivative of the frequency of the received beam, the link behaves as a differential, time-delayed dynamometer in which the effect of gravity is exactly equivalent to an effective differential force applied to the two satellites. We also show that this differential force gives an integrated measurement of curvature along the beam. Finally, we discuss how this approach can be implemented to benefit the data analysis of gravitational wave detectors.
△ Less
Submitted 16 July, 2013; v1 submitted 6 June, 2013;
originally announced June 2013.
-
The Gravitational Universe
Authors:
The eLISA Consortium,
:,
P. Amaro Seoane,
S. Aoudia,
H. Audley,
G. Auger,
S. Babak,
J. Baker,
E. Barausse,
S. Barke,
M. Bassan,
V. Beckmann,
M. Benacquista,
P. L. Bender,
E. Berti,
P. Binétruy,
J. Bogenstahl,
C. Bonvin,
D. Bortoluzzi,
N. C. Brause,
J. Brossard,
S. Buchman,
I. Bykov,
J. Camp,
C. Caprini
, et al. (136 additional authors not shown)
Abstract:
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in th…
▽ More
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in the Universe, and much of its action is dark. Opening a gravitational window on the Universe will let us go further than any alternative. Gravity has its own messenger: Gravitational waves, ripples in the fabric of spacetime. They travel essentially undisturbed and let us peer deep into the formation of the first seed black holes, exploring redshifts as large as z ~ 20, prior to the epoch of cosmic re-ionisation. Exquisite and unprecedented measurements of black hole masses and spins will make it possible to trace the history of black holes across all stages of galaxy evolution, and at the same time constrain any deviation from the Kerr metric of General Relativity. eLISA will be the first ever mission to study the entire Universe with gravitational waves. eLISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using gravitational waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the early processes at TeV energies, has guaranteed sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales around singularities and black holes, all the way to cosmological dimensions.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.
-
The interaction between stray electrostatic fields and a charged free-falling test mass
Authors:
F. Antonucci,
A. Cavalleri,
R. Dolesi,
M. Hueller,
D. Nicolodi,
H. B. Tu,
S. Vitale,
W. J. Weber
Abstract:
We present an experimental analysis of force noise caused by stray electrostatic fields acting on a charged test mass inside a conducting enclosure, a key problem for precise gravitational experiments. Measurement of the average field that couples to test mass charge, and its fluctuations, is performed with two independent torsion pendulum techniques, including direct measurement of the forces cau…
▽ More
We present an experimental analysis of force noise caused by stray electrostatic fields acting on a charged test mass inside a conducting enclosure, a key problem for precise gravitational experiments. Measurement of the average field that couples to test mass charge, and its fluctuations, is performed with two independent torsion pendulum techniques, including direct measurement of the forces caused by a change in electrostatic charge. We analyze the problem with an improved electrostatic model that, coupled with the experimental data, also indicates how to correctly measure and null the stray field that interacts with test mass charge. Our measurements allow a conservative upper limit on acceleration noise, of 2 fm/s$^2$\rthz\ for frequencies above 0.1 mHz, for the interaction between stray fields and charge in the LISA gravitational wave mission.
△ Less
Submitted 7 May, 2012; v1 submitted 9 April, 2012;
originally announced April 2012.
-
Brownian force noise from molecular collisions and the sensitivity of advanced gravitational wave observatories
Authors:
R. Dolesi,
M. Hueller,
D. Nicolodi,
D. Tombolato,
S. Vitale,
P. J. Wass,
W. J. Weber,
M. Evans,
P. Fritschel,
R. Weiss,
J. H. Gundlach,
C. A. Hagedorn,
S. Schlamminger,
G. Ciani,
A. Cavalleri
Abstract:
We present an analysis of Brownian force noise from residual gas dam** of reference test masses as a fundamental sensitivity limit in small force experiments. The resulting acceleration noise increases significantly when the distance of the test mass to the surrounding experimental apparatus is smaller than the dimension of the test mass itself. For the Advanced LIGO interferometric gravitationa…
▽ More
We present an analysis of Brownian force noise from residual gas dam** of reference test masses as a fundamental sensitivity limit in small force experiments. The resulting acceleration noise increases significantly when the distance of the test mass to the surrounding experimental apparatus is smaller than the dimension of the test mass itself. For the Advanced LIGO interferometric gravitational wave observatory, where the relevant test mass is a suspended 340 mm diameter cylindrical end mirror, the force noise power is increased by roughly a factor 40 by the presence of a similarly shaped reaction mass at a nominal separation of 5 mm. The force noise, of order 20 fN\rthz\ for $2 \times 10^{-6}$ Pa of residual H$_2$ gas, rivals quantum optical fluctuations as the dominant noise source between 10 and 30 Hz. We present here a numerical and analytical analysis for the gas dam** force noise for Advanced LIGO, backed up by experimental evidence from several recent measurements. Finally, we discuss the impact of residual gas dam** on the gravitational wave sensitivity and possible mitigation strategies.
△ Less
Submitted 30 September, 2011; v1 submitted 16 August, 2011;
originally announced August 2011.
-
Increased Brownian force noise from molecular impacts in a constrained volume
Authors:
A. Cavalleri,
G. Ciani,
R. Dolesi,
A. Heptonstall,
M. Hueller,
D. Nicolodi,
S. Rowan,
D. Tombolato,
S. Vitale,
P. J. Wass,
W. J. Weber
Abstract:
We report on residual gas dam** of the motion of a macroscopic test mass enclosed in a nearby housing in the molecular flow regime. The dam** coefficient, and thus the associated thermal force noise, is found to increase significantly when the distance between test mass and surrounding walls is smaller than the test mass itself. The effect has been investigated with two torsion pendulums of di…
▽ More
We report on residual gas dam** of the motion of a macroscopic test mass enclosed in a nearby housing in the molecular flow regime. The dam** coefficient, and thus the associated thermal force noise, is found to increase significantly when the distance between test mass and surrounding walls is smaller than the test mass itself. The effect has been investigated with two torsion pendulums of different geometry and has been modelled in a numerical simulation whose predictions are in good agreement with the measurements. Relevant to a wide variety of small-force experiments, the residual-gas force noise power for the test masses in the LISA gravitational wave observatory is roughly a factor 15 larger than in an infinite gas volume, though still compatible with the target acceleration noise of 3 fm s^-2 Hz^-1/2 at the foreseen pressure below 10^-6 Pa.
△ Less
Submitted 13 July, 2011;
originally announced July 2011.
-
From laboratory experiments to LISA Pathfinder: achieving LISA geodesic motion
Authors:
F Antonucci,
M Armano,
H Audley,
G Auger,
M Benedetti,
P Binetruy,
C Boatella,
J Bogenstahl,
D Bortoluzzi,
P Bosetti,
N Brandt,
M Caleno,
A Cavalleri,
M Cesa,
M Chmeissani,
G Ciani,
A Conchillo,
G Congedo,
I Cristofolini,
M Cruise,
K Danzmann,
F De Marchi,
M Diaz-Aguilo,
I Diepholz,
G Dixon
, et al. (76 additional authors not shown)
Abstract:
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA t…
▽ More
This paper presents a quantitative assessment of the performance of the upcoming LISA Pathfinder geodesic explorer mission. The findings are based on the results of extensive ground testing and simulation campaigns using flight hardware and flight control and operations algorithms. The results show that, for the central experiment of measuring the stray differential acceleration between the LISA test masses, LISA Pathfinder will be able to verify the overall acceleration noise to within a factor two of the LISA requirement at 1 mHz and within a factor 6 at 0.1 mHz. We also discuss the key elements of the physical model of disturbances, coming from LISA Pathfinder and ground measurement, that will guarantee the LISA performance.
△ Less
Submitted 20 January, 2011; v1 submitted 29 December, 2010;
originally announced December 2010.
-
Thermal gradient-induced forces on geodetic reference masses for LISA
Authors:
L. Carbone,
A. Cavalleri,
G. Ciani,
R. Dolesi,
M. Hueller,
D. Tombolato,
S. Vitale,
W. J. Weber
Abstract:
The low frequency sensitivity of space-borne gravitational wave observatories will depend critically on the geodetic purity of the trajectories of orbiting test masses. Fluctuations in the temperature difference across the enclosure surrounding the free-falling test mass can produce noisy forces through several processes, including the radiometric effect, radiation pressure, and outgassing. We p…
▽ More
The low frequency sensitivity of space-borne gravitational wave observatories will depend critically on the geodetic purity of the trajectories of orbiting test masses. Fluctuations in the temperature difference across the enclosure surrounding the free-falling test mass can produce noisy forces through several processes, including the radiometric effect, radiation pressure, and outgassing. We present here a detailed experimental investigation of thermal gradient-induced forces for the LISA gravitational wave mission and the LISA Pathfinder, employing high resolution torsion pendulum measurements of the torque on a LISA-like test mass suspended inside a prototype of the LISA gravitational reference sensor that will surround the test mass in orbit. The measurement campaign, accompanied by numerical simulations of the radiometric and radiation pressure effects, allows a more accurate and representative characterization of thermal-gradient forces in the specific geometry and environment relevant to LISA free-fall. The pressure dependence of the measured torques allows clear identification of the radiometric effect, in quantitative agreement with the model developed. In the limit of zero gas pressure, the measurements are most likely dominated by outgassing, but at a low level that does not threaten the LISA sensitivity goals.
△ Less
Submitted 29 June, 2007;
originally announced June 2007.
-
Torsion pendulum facility for direct force measurements of LISA GRS related disturbances
Authors:
L. Carbone,
A. Cavalleri,
G. Ciani,
R. Dolesi,
M. Hueller,
D. Tombolato,
S. Vitale,
W. J. Weber
Abstract:
A four mass torsion pendulum facility for testing of the LISA GRS is under development in Trento. With a LISA-like test mass suspended off-axis with respect to the pendulum fiber, the facility allows for a direct measurement of surface force disturbances arising in the GRS. We present here results with a prototype pendulum integrated with very large-gap sensors, which allows an estimate of the i…
▽ More
A four mass torsion pendulum facility for testing of the LISA GRS is under development in Trento. With a LISA-like test mass suspended off-axis with respect to the pendulum fiber, the facility allows for a direct measurement of surface force disturbances arising in the GRS. We present here results with a prototype pendulum integrated with very large-gap sensors, which allows an estimate of the intrinsic pendulum noise floor in the absence of sensor related force noise. The apparatus has shown a torque noise near to its mechanical thermal noise limit, and would allow to place upper limits on GRS related disturbances with a best sensitivity of 300 fN/Hz^(1/2) at 1mHz, a factor 50 from the LISA goal. Also, we discuss the characterization of the gravity gradient noise, one environmental noise source that could limit the apparatus performances, and report on the status of development of the facility.
△ Less
Submitted 6 November, 2006;
originally announced November 2006.
-
Upper limits to surface force disturbances on LISA proof masses and the possibility of observing galactic binaries
Authors:
Ludovico Carbone,
Giacomo Ciani,
Rita Dolesi,
Mauro Hueller,
David Tombolato,
Stefano Vitale,
William Joseph Weber,
Antonella Cavalleri
Abstract:
We report on the measurement of parasitic surface force noise on a hollow replica of a LISA (Laser Interferometer Space Antenna for the observation of gravitational waves) proof mass surrounded by a faithful representation of its in flight surroundings, namely the capacitive sensor used to detect proof-mass motion. Parasitic forces are detected through the corresponding torque exerted on the pro…
▽ More
We report on the measurement of parasitic surface force noise on a hollow replica of a LISA (Laser Interferometer Space Antenna for the observation of gravitational waves) proof mass surrounded by a faithful representation of its in flight surroundings, namely the capacitive sensor used to detect proof-mass motion. Parasitic forces are detected through the corresponding torque exerted on the proof mass and measured with a torsion pendulum in the frequency range 0.1 30 mHz. The sensor electrodes, electrode housing and associated readout electronics have the same nominal design as for the flight hardware, including 4 mm gaps around the proof mass along the sensitive laser interferometry axis. We show that the measured upper limit for surface forces would allow detection of a number of galactic binaries signals with signal to noise ratio up to approximately 40 for 1 year integration. We also discuss how the flight test under development, LISA Pathfinder, will substantially improve this limit, approaching the performance required for LISA.
△ Less
Submitted 8 November, 2006; v1 submitted 5 November, 2006;
originally announced November 2006.
-
Characterization of disturbance sources for LISA: torsion pendulum results
Authors:
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale,
W. J. Weber
Abstract:
A torsion pendulum allows ground-based investigation of the purity of free-fall for the LISA test masses inside their capacitive position sensor. This paper presents recent improvements in our torsion pendulum facility that have both increased the pendulum sensitivity and allowed detailed characterization of several important sources of acceleration noise for the LISA test masses. We discuss her…
▽ More
A torsion pendulum allows ground-based investigation of the purity of free-fall for the LISA test masses inside their capacitive position sensor. This paper presents recent improvements in our torsion pendulum facility that have both increased the pendulum sensitivity and allowed detailed characterization of several important sources of acceleration noise for the LISA test masses. We discuss here an improved upper limit on random force noise originating in the sensor. Additionally, we present new measurement techniques and preliminary results for characterizing the forces caused by the sensor's residual electrostatic fields, dielectric losses, residual spring-like coupling, and temperature gradients.
△ Less
Submitted 21 December, 2004;
originally announced December 2004.
-
Measuring the LISA test mass magnetic proprieties with a torsion pendulum
Authors:
M. Hueller,
M. Armano,
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
S. Vitale,
W. J. Weber
Abstract:
Achieving the low frequency LISA sensitivity requires that the test masses acting as the interferometer end mirrors are free-falling with an unprecedented small degree of deviation. Magnetic disturbances, originating in the interaction of the test mass with the environmental magnetic field, can significantly deteriorate the LISA performance and can be parameterized through the test mass remnant…
▽ More
Achieving the low frequency LISA sensitivity requires that the test masses acting as the interferometer end mirrors are free-falling with an unprecedented small degree of deviation. Magnetic disturbances, originating in the interaction of the test mass with the environmental magnetic field, can significantly deteriorate the LISA performance and can be parameterized through the test mass remnant dipole moment $\vec{m}_r$ and the magnetic susceptibility $χ$. While the LISA test flight precursor LTP will investigate these effects during the preliminary phases of the mission, the very stringent requirements on the test mass magnetic cleanliness make ground-based characterization of its magnetic proprieties paramount. We propose a torsion pendulum technique to accurately measure on ground the magnetic proprieties of the LISA/LTP test masses.
△ Less
Submitted 2 May, 2005; v1 submitted 19 December, 2004;
originally announced December 2004.
-
Improved Torsion Pendulum for Ground Testing of LISA Displacement Sensors
Authors:
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale,
W. J. Weber
Abstract:
We discuss a new torsion pendulum design for ground testing of prototype LISA (Laser Interferometer Space Antenna) displacement sensors. This new design is directly sensitive to net forces and therefore provides a more representative test of the noisy forces and parasitic stiffnesses acting on the test mass as compared to previous ground-based experiments. We also discuss a specific application…
▽ More
We discuss a new torsion pendulum design for ground testing of prototype LISA (Laser Interferometer Space Antenna) displacement sensors. This new design is directly sensitive to net forces and therefore provides a more representative test of the noisy forces and parasitic stiffnesses acting on the test mass as compared to previous ground-based experiments. We also discuss a specific application to the measurement of thermal gradient effects.
△ Less
Submitted 9 November, 2004;
originally announced November 2004.
-
Measuring random force noise for LISA aboard the LISA Pathfinder mission
Authors:
D. Bortoluzzi,
L. Carbone,
A. Cavalleri,
M. Da Lio,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale,
W. J. Weber
Abstract:
The LTP (LISA Testflight Package), to be flown aboard the ESA / NASA LISA Pathfinder mission, aims to demonstrate drag-free control for LISA test masses with acceleration noise below 30 fm/s^2/Hz^1/2 from 1-30 mHz. This paper describes the LTP measurement of random, position independent forces acting on the test masses. In addition to putting an overall upper limit for all source of random force…
▽ More
The LTP (LISA Testflight Package), to be flown aboard the ESA / NASA LISA Pathfinder mission, aims to demonstrate drag-free control for LISA test masses with acceleration noise below 30 fm/s^2/Hz^1/2 from 1-30 mHz. This paper describes the LTP measurement of random, position independent forces acting on the test masses. In addition to putting an overall upper limit for all source of random force noise, LTP will measure the conversion of several key disturbances into acceleration noise and thus allow a more detailed characterization of the drag-free performance to be expected for LISA.
△ Less
Submitted 4 February, 2004;
originally announced February 2004.
-
Upper limits on stray force noise for LISA
Authors:
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale,
W. J. Weber
Abstract:
We have developed a torsion pendulum facility for LISA gravitational reference sensor ground testing that allows us to put significant upper limits on residual stray forces exerted by LISA-like position sensors on a representative test mass and to characterize specific sources of disturbances for LISA. We present here the details of the facility, the experimental procedures used to maximize its…
▽ More
We have developed a torsion pendulum facility for LISA gravitational reference sensor ground testing that allows us to put significant upper limits on residual stray forces exerted by LISA-like position sensors on a representative test mass and to characterize specific sources of disturbances for LISA. We present here the details of the facility, the experimental procedures used to maximize its sensitivity, and the techniques used to characterize the pendulum itself that allowed us to reach a torque sensitivity below 20 fNm /sqrt{Hz} from 0.3 to 10 mHz. We also discuss the implications of the obtained results for LISA.
△ Less
Submitted 28 October, 2003;
originally announced October 2003.
-
Possibilities for Measurement and Compensation of Stray DC Electric Fields Acting on Drag-Free Test Masses
Authors:
W. J. Weber,
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale
Abstract:
DC electric fields can combine with test mass charging and thermal dielectric voltage noise to create significant force noise acting on the drag-free test masses in the LISA (Laser Interferometer Space Antenna) gravitational wave mission. This paper proposes a simple technique to measure and compensate average stray DC potentials at the mV level, yielding substantial reduction in this source of…
▽ More
DC electric fields can combine with test mass charging and thermal dielectric voltage noise to create significant force noise acting on the drag-free test masses in the LISA (Laser Interferometer Space Antenna) gravitational wave mission. This paper proposes a simple technique to measure and compensate average stray DC potentials at the mV level, yielding substantial reduction in this source of force noise. We discuss the attainable resolution for both flight and ground based experiments.
△ Less
Submitted 13 September, 2003;
originally announced September 2003.
-
Achieving geodetic motion for LISA test masses: ground testing result
Authors:
L. Carbone,
A. Cavalleri,
R. Dolesi,
C. D. Hoyle,
M. Hueller,
S. Vitale,
W. J. Weber
Abstract:
The low-frequency resolution of space-based gravitational wave observatories such as LISA (Laser Interferometry Space Antenna) hinges on the orbital purity of a free-falling reference test mass inside a satellite shield. We present here a torsion pendulum study of the forces that will disturb an orbiting test mass inside a LISA capacitive position sensor. The pendulum, with a measured torque noi…
▽ More
The low-frequency resolution of space-based gravitational wave observatories such as LISA (Laser Interferometry Space Antenna) hinges on the orbital purity of a free-falling reference test mass inside a satellite shield. We present here a torsion pendulum study of the forces that will disturb an orbiting test mass inside a LISA capacitive position sensor. The pendulum, with a measured torque noise floor below 10 fNm/sqrt{Hz} from 0.6 to 10 mHz, has allowed placement of an upper limit on sensor force noise contributions, measurement of the sensor electrostatic stiffness at the 5% level, and detection and compensation of stray DC electrostatic biases at the mV level.
△ Less
Submitted 4 February, 2004; v1 submitted 2 July, 2003;
originally announced July 2003.
