-
Self-Tuning Network Control Architectures with Joint Sensor and Actuator Selection
Authors:
Karthik Ganapathy,
Iman Shames,
Mathias Hudoba de Badyn,
Tyler Summers
Abstract:
We formulate a mathematical framework for designing a self-tuning network control architecture, and propose a computationally-feasible greedy algorithm for online architecture optimization. In this setting, the locations of active sensors and actuators in the network, as well as the feedback control policy are jointly adapted using all available information about the network states and dynamics to…
▽ More
We formulate a mathematical framework for designing a self-tuning network control architecture, and propose a computationally-feasible greedy algorithm for online architecture optimization. In this setting, the locations of active sensors and actuators in the network, as well as the feedback control policy are jointly adapted using all available information about the network states and dynamics to optimize a performance criterion. We show that the case with full-state feedback can be solved with dynamic programming, and in the linear-quadratic setting, the optimal cost functions and policies are piecewise quadratic and piecewise linear, respectively. Our framework is extended for joint sensor and actuator selection for dynamic output feedback control with both control performance and architecture costs. For large networks where exhaustive architecture search is prohibitive, we describe a greedy heuristic for actuator selection and propose a greedy swap** algorithm for joint sensor and actuator selection. Via numerical experiments, we demonstrate a dramatic performance improvement of greedy self-tuning architectures over fixed architectures. Our general formulation provides an extremely rich and challenging problem space with opportunities to apply a wide variety of approximation methods from stochastic control, system identification, reinforcement learning, and static architecture design for practical model-based control.
△ Less
Submitted 19 January, 2024;
originally announced February 2024.
-
Degradation-aware data-enabled predictive control of energy hubs
Authors:
Varsha Behrunani,
Marta Zagorowska,
Mathias Hudoba de Badyn,
Francesco Ricca,
Philipp Heer,
John Lygeros
Abstract:
Mitigating the energy use in buildings, together with satisfaction of comfort requirements are the main objectives of efficient building control systems. Augmenting building energy systems with batteries can improve the energy use of a building, while posing the challenge of considering battery degradation during control operation. We demonstrate the performance of a data-enabled predictive contro…
▽ More
Mitigating the energy use in buildings, together with satisfaction of comfort requirements are the main objectives of efficient building control systems. Augmenting building energy systems with batteries can improve the energy use of a building, while posing the challenge of considering battery degradation during control operation. We demonstrate the performance of a data-enabled predictive control (DeePC) approach applied to a single multi-zone building and an energy hub comprising an electric heat pump and a battery. In a comparison with a standard rule-based controller, results demonstrate that the performance of DeePC is superior in terms of satisfaction of comfort constraints without increasing grid power consumption. Moreover, DeePC achieved two-fold decrease in battery degradation over one year, as compared to a rule-based controller.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Stability and Robustness of Distributed Suboptimal Model Predictive Control
Authors:
Giuseppe Belgioioso,
Dominic Liao-McPherson,
Mathias Hudoba de Badyn,
Nicolas Pelzmann,
John Lygeros,
Florian Dörfler
Abstract:
In distributed model predictive control (MPC), the control input at each sampling time is computed by solving a large-scale optimal control problem (OCP) over a finite horizon using distributed algorithms. Typically, such algorithms require several (virtually, infinite) communication rounds between the subsystems to converge, which is a major drawback both computationally and from an energetic per…
▽ More
In distributed model predictive control (MPC), the control input at each sampling time is computed by solving a large-scale optimal control problem (OCP) over a finite horizon using distributed algorithms. Typically, such algorithms require several (virtually, infinite) communication rounds between the subsystems to converge, which is a major drawback both computationally and from an energetic perspective (for wireless systems). Motivated by these challenges, we propose a suboptimal distributed MPC scheme in which the total communication burden is distributed also in time, by maintaining a running solution estimate for the large-scale OCP and updating it at each sampling time. We demonstrate that, under some regularity conditions, the resulting suboptimal MPC control law recovers the qualitative robust stability properties of optimal MPC, if the communication budget at each sampling time is large enough.
△ Less
Submitted 27 March, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Physics-informed linear regression is competitive with two Machine Learning methods in residential building MPC
Authors:
Felix Bünning,
Benjamin Huber,
Adrian Schalbetter,
Ahmed Aboudonia,
Mathias Hudoba de Badyn,
Philipp Heer,
Roy S. Smith,
John Lygeros
Abstract:
Because physics-based building models are difficult to obtain as each building is individual, there is an increasing interest in generating models suitable for building MPC directly from measurement data. Machine learning methods have been widely applied to this problem and validated mostly in simulation; there are, however, few studies on a direct comparison of different models or validation in r…
▽ More
Because physics-based building models are difficult to obtain as each building is individual, there is an increasing interest in generating models suitable for building MPC directly from measurement data. Machine learning methods have been widely applied to this problem and validated mostly in simulation; there are, however, few studies on a direct comparison of different models or validation in real buildings to be found in the literature. Methods that are indeed validated in application often lead to computationally complex non-convex optimization problems. Here we compare physics-informed Autoregressive-Moving-Average with Exogenous Inputs (ARMAX) models to Machine Learning models based on Random Forests and Input Convex Neural Networks and the resulting convex MPC schemes in experiments on a practical building application with the goal of minimizing energy consumption while maintaining occupant comfort, and in a numerical case study. We demonstrate that Predictive Control in general leads to savings between 26% and 49% of heating and cooling energy, compared to the building's baseline hysteresis controller. Moreover, we show that all model types lead to satisfactory control performance in terms of constraint satisfaction and energy reduction. However, we also see that the physics-informed ARMAX models have a lower computational burden, and a superior sample efficiency compared to the Machine Learning based models. Moreover, even if abundant training data is available, the ARMAX models have a significantly lower prediction error than the Machine Learning models, which indicates that the encoded physics-based prior of the former cannot independently be found by the latter.
△ Less
Submitted 26 January, 2022; v1 submitted 29 October, 2021;
originally announced October 2021.
-
Distributed Model Predictive Control of Buildings and Energy Hubs
Authors:
Nicolas Lefebure,
Mohammad Khosravi,
Mathias Hudoba de Badyn,
Felix Bünning,
John Lygeros,
Colin Jones,
Roy S. Smith
Abstract:
Model predictive control (MPC) strategies can be applied to the coordination of energy hubs to reduce their energy consumption. Despite the effectiveness of these techniques, their potential for energy savings are potentially underutilized due to the fact that energy demands are often assumed to be fixed quantities rather than controlled dynamic variables. The joint optimization of energy hubs and…
▽ More
Model predictive control (MPC) strategies can be applied to the coordination of energy hubs to reduce their energy consumption. Despite the effectiveness of these techniques, their potential for energy savings are potentially underutilized due to the fact that energy demands are often assumed to be fixed quantities rather than controlled dynamic variables. The joint optimization of energy hubs and buildings' energy management systems can result in higher energy savings. This paper investigates how different MPC strategies perform on energy management systems in buildings and energy hubs. We first discuss two MPC approaches; centralized and decentralized. While the centralized control strategy offers optimal performance, its implementation is computationally prohibitive and raises privacy concerns. On the other hand, the decentralized control approach, which offers ease of implementation, displays significantly lower performance. We propose a third strategy, distributed control based on dual decomposition, which has the advantages of both approaches. Numerical case studies and comparisons demonstrate that the performance of distributed control is close to the performance of the centralized case, while maintaining a significantly lower computational burden, especially in large-scale scenarios with many agents. Finally, we validate and verify the reliability of the proposed method through an experiment on a full-scale energy hub system in the NEST demonstrator in Dübendorf, Switzerland.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
Distributed Feedback Optimisation for Robotic Coordination
Authors:
Antonio Terpin,
Sylvain Fricker,
Michel Perez,
Mathias Hudoba de Badyn,
Florian Dörfler
Abstract:
Feedback optimisation is an emerging technique aiming at steering a system to an optimal steady state for a given objective function. We show that it is possible to employ this control strategy in a distributed manner. Moreover, we prove asymptotic convergence to the set of optimal configurations. To this scope, we show that exponential stability is needed only for the portion of the state that af…
▽ More
Feedback optimisation is an emerging technique aiming at steering a system to an optimal steady state for a given objective function. We show that it is possible to employ this control strategy in a distributed manner. Moreover, we prove asymptotic convergence to the set of optimal configurations. To this scope, we show that exponential stability is needed only for the portion of the state that affects the objective function. This is showcased by driving a swarm of agents towards a target location while maintaining a target formation. Finally, we provide a sufficient condition on the topological structure of the specified formation to guarantee convergence of the swarm in formation around the target location.
△ Less
Submitted 27 February, 2022; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Input Convex Neural Networks for Building MPC
Authors:
Felix Bünning,
Adrian Schalbetter,
Ahmed Aboudonia,
Mathias Hudoba de Badyn,
Philipp Heer,
John Lygeros
Abstract:
Model Predictive Control in buildings can significantly reduce their energy consumption. The cost and effort necessary for creating and maintaining first principle models for buildings make data-driven modelling an attractive alternative in this domain. In MPC the models form the basis for an optimization problem whose solution provides the control signals to be applied to the system. The fact tha…
▽ More
Model Predictive Control in buildings can significantly reduce their energy consumption. The cost and effort necessary for creating and maintaining first principle models for buildings make data-driven modelling an attractive alternative in this domain. In MPC the models form the basis for an optimization problem whose solution provides the control signals to be applied to the system. The fact that this optimization problem has to be solved repeatedly in real-time implies restrictions on the learning architectures that can be used. Here, we adapt Input Convex Neural Networks that are generally only convex for one-step predictions, for use in building MPC. We introduce additional constraints to their structure and weights to achieve a convex input-output relationship for multistep ahead predictions. We assess the consequences of the additional constraints for the model accuracy and test the models in a real-life MPC experiment in an apartment in Switzerland. In two five-day cooling experiments, MPC with Input Convex Neural Networks is able to keep room temperatures within comfort constraints while minimizing cooling energy consumption.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
