-
On the Energy Consumption of UAV Edge Computing in Non-Terrestrial Networks
Authors:
Alessandro Traspadini,
Marco Giordani,
Giovanni Giambene,
Tomaso De Cola,
Michele Zorzi
Abstract:
During the last few years, the use of Unmanned Aerial Vehicles (UAVs) equipped with sensors and cameras has emerged as a cutting-edge technology to provide services such as surveillance, infrastructure inspections, and target acquisition. However, this approach requires UAVs to process data onboard, mainly for person/object detection and recognition, which may pose significant energy constraints a…
▽ More
During the last few years, the use of Unmanned Aerial Vehicles (UAVs) equipped with sensors and cameras has emerged as a cutting-edge technology to provide services such as surveillance, infrastructure inspections, and target acquisition. However, this approach requires UAVs to process data onboard, mainly for person/object detection and recognition, which may pose significant energy constraints as UAVs are battery-powered. A possible solution can be the support of Non-Terrestrial Networks (NTNs) for edge computing. In particular, UAVs can partially offload data (e.g., video acquisitions from onboard sensors) to more powerful upstream High Altitude Platforms (HAPs) or satellites acting as edge computing servers to increase the battery autonomy compared to local processing, even though at the expense of some data transmission delays. Accordingly, in this study we model the energy consumption of UAVs, HAPs, and satellites considering the energy for data processing, offloading, and hovering. Then, we investigate whether data offloading can improve the system performance. Simulations demonstrate that edge computing can improve both UAV autonomy and end-to-end delay compared to onboard processing in many configurations.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Minimizing Energy Consumption for 5G NR Beam Management for RedCap Devices
Authors:
Manishika Rawat,
Matteo Pagin,
Marco Giordani,
Louis-Adrien Dufrene,
Quentin Lampin,
Michele Zorzi
Abstract:
In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, suc…
▽ More
In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, such as RedCap devices to support mid-market Internet of Things (IoT) use cases. In this context, this work aims at reducing the energy consumption during beam management for RedCap devices, while ensuring that the desired Quality of Service (QoS) requirements are met. To do so, we formalize an optimization problem in an Indoor Factory (InF) scenario to select the best beam management parameters, including the beam update periodicity and the beamwidth, to minimize energy consumption based on users' distribution and their speed. The analysis yields the regions of feasibility, i.e., the upper limit(s) on the beam management parameters for RedCap devices, that we use to provide design guidelines accordingly.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Modeling Interference for the Coexistence of 6G Networks and Passive Sensing Systems
Authors:
Paolo Testolina,
Michele Polese,
Josep M. Jornet,
Tommaso Melodia,
Michele Zorzi
Abstract:
Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100 GHz featu…
▽ More
Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100 GHz features several bands which are protected from active transmissions under current spectrum regulations. To provide more agile access to the spectrum for both services, active and passive users will have to coexist without harming passive sensing operations. In this paper, we provide the first, fundamental analysis of Radio Frequency Interference (RFI) that large-scale terrestrial deployments introduce in different satellite sensing systems now orbiting the Earth. We develop a geometry-based analysis and extend it into a data-driven model which accounts for realistic propagation, building obstruction, ground reflection, for network topology with up to $10^5$ nodes in more than $85$ km$^2$. We show that the presence of harmful RFI depends on several factors, including network load, density and topology, satellite orientation, and building density. The results and methodology provide the foundation for the development of coexistence solutions and spectrum policy towards 6G.
△ Less
Submitted 7 August, 2023; v1 submitted 27 July, 2023;
originally announced July 2023.
-
Distributionally Robust LQG control under Distributed Uncertainty
Authors:
Lucia Falconi,
Augusto Ferrante,
Mattia Zorzi
Abstract:
A new paradigm is proposed for the robustification of the LQG controller against distributional uncertainties on the noise process. Our controller optimizes the closed-loop performances in the worst possible scenario under the constraint that the noise distributional aberrance does not exceed a certain threshold limiting the relative entropy pseudo-distance between the actual noise distribution th…
▽ More
A new paradigm is proposed for the robustification of the LQG controller against distributional uncertainties on the noise process. Our controller optimizes the closed-loop performances in the worst possible scenario under the constraint that the noise distributional aberrance does not exceed a certain threshold limiting the relative entropy pseudo-distance between the actual noise distribution the nominal one. The main novelty is that the bounds on the distributional aberrance can be arbitrarily distributed along the whole disturbance trajectory. We discuss why this can, in principle, be a substantial advantage and we provide simulation results that substantiate such a principle.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Downlink Clustering-Based Scheduling of IRS-Assisted Communications With Reconfiguration Constraints
Authors:
Alberto Rech,
Matteo Pagin,
Leonardo Badia,
Stefano Tomasin,
Marco Giordani,
Jonathan Gambini,
Michele Zorzi
Abstract:
Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an I…
▽ More
Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an IRS-assisted time division multiple access (TDMA) cellular network where the reconfiguration of the IRS incurs a communication cost; thus, we aim at limiting the number of reconfigurations over time. Along these lines, we propose a clustering-based heuristic scheduling scheme that maximizes the cell sum capacity, subject to a fixed number of reconfigurations within a TDMA frame. First, the best configuration of each user equipment (UE), in terms of joint beamforming and optimal IRS configuration, is determined using an iterative algorithm. Then, we propose different clustering techniques to divide the UEs into subsets sharing the same sub-optimal IRS configuration, derived through distance- and capacity-based algorithms. Finally, UEs within the same cluster are scheduled accordingly. We provide extensive numerical results for different propagation scenarios, IRS sizes, and phase shifters quantization constraints, showing the effectiveness of our approach in supporting multi-user IRS systems with practical constraints.
△ Less
Submitted 12 February, 2024; v1 submitted 23 May, 2023;
originally announced May 2023.
-
Implementation of a Channel Model for Non-Terrestrial Networks in ns-3
Authors:
Mattia Sandri,
Matteo Pagin,
Marco Giordani,
Michele Zorzi
Abstract:
While the 5th generation (5G) of mobile networks has landed in the commercial area, the research community is exploring new functionalities for 6th generation (6G) networks, for example non-terrestrial networks (NTNs) via space/air nodes such as Unmanned Aerial Vehicles (UAVs), High Altitute Platforms (HAPs) or satellites. Specifically, satellite-based communication offers new opportunities for fu…
▽ More
While the 5th generation (5G) of mobile networks has landed in the commercial area, the research community is exploring new functionalities for 6th generation (6G) networks, for example non-terrestrial networks (NTNs) via space/air nodes such as Unmanned Aerial Vehicles (UAVs), High Altitute Platforms (HAPs) or satellites. Specifically, satellite-based communication offers new opportunities for future wireless applications, such as providing connectivity to remote or otherwise unconnected areas, complementing terrestrial networks to reduce connection downtime, as well as increasing traffic efficiency in hot spot areas. In this context, an accurate characterization of the NTN channel is the first step towards proper protocol design. Along these lines, this paper provides an ns-3 implementation of the 3rd Generation Partnership Project (3GPP) channel and antenna models for NTN described in Technical Report 38.811. In particular, we extend the ns-3 code base with new modules to implement the attenuation of the signal in air/space due to atmospheric gases and scintillation, and new mobility and fading models to account for the Geocentric Cartesian coordinate system of satellites. Finally, we validate the accuracy of our ns-3 module via simulations against 3GPP calibration results
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Downlink TDMA Scheduling for IRS-aided Communications with Block-Static Constraints
Authors:
Alberto Rech,
Matteo Pagin,
Stefano Tomasin,
Federico Moretto,
Leonardo Badia,
Marco Giordani,
Jonathan Gambini,
Michele Zorzi
Abstract:
Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequenc…
▽ More
Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequency the phase-shifts induced by their elements, thanks to a wire-like control channel to the next generation node base (gNB). Instead, in this work we investigate an IRS-aided time division multiple access (TDMA) cellular network, where the reconfiguration of the IRS may entail an energy or communication cost, and we aim at limiting the number of reconfigurations over time. We develop a clustering-based heuristic scheduling, which optimizes the system sum-rate subject to a given number of reconfigurations within the TDMA frame. To such end, we first cluster user equipments (UEs) with a similar optimal IRS configuration. Then, we compute an overall IRS cluster configuration, which can be thus kept constant while scheduling the whole UEs cluster. Numerical results show that our approach is effective in supporting IRSs-aided systems with practical constraints, achieving up to 85% of the throughput obtained by an ideal deployment, while providing a 50% reduction in the number of IRS reconfigurations.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Real-Time HAP-Assisted Vehicular Edge Computing for Rural Areas
Authors:
Alessandro Traspadini,
Marco Giordani,
Giovanni Giambene,
Michele Zorzi
Abstract:
Non-Terrestrial Networks (NTNs) are expected to be a key component of 6th generation (6G) networks to support broadband seamless Internet connectivity and expand the coverage even in rural and remote areas. In this context, High Altitude Platforms (HAPs) can act as edge servers to process computational tasks offloaded by energy-constrained terrestrial devices such as Internet of Things (IoT) senso…
▽ More
Non-Terrestrial Networks (NTNs) are expected to be a key component of 6th generation (6G) networks to support broadband seamless Internet connectivity and expand the coverage even in rural and remote areas. In this context, High Altitude Platforms (HAPs) can act as edge servers to process computational tasks offloaded by energy-constrained terrestrial devices such as Internet of Things (IoT) sensors and ground vehicles (GVs). In this paper, we analyze the opportunity to support Vehicular Edge Computing (VEC) via HAP in a rural scenario where GVs can decide whether to process data onboard or offload them to a HAP. We characterize the system as a set of queues in which computational tasks arrive according to a Poisson arrival process. Then, we assess the optimal VEC offloading factor to maximize the probability of real-time service, given latency and computational capacity constraints.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
On the Statistical Consistency of a Generalized Cepstral Estimator
Authors:
Bin Zhu,
Mattia Zorzi
Abstract:
We consider the problem to estimate the generalized cepstral coefficients of a stationary stochastic process or stationary multidimensional random field. It turns out that a naive version of the periodogram-based estimator for the generalized cepstral coefficients is not consistent. We propose a consistent estimator for those coefficients. Moreover, we show that the latter can be used in order to…
▽ More
We consider the problem to estimate the generalized cepstral coefficients of a stationary stochastic process or stationary multidimensional random field. It turns out that a naive version of the periodogram-based estimator for the generalized cepstral coefficients is not consistent. We propose a consistent estimator for those coefficients. Moreover, we show that the latter can be used in order to build a consistent estimator for a particular class of cascade linear stochastic systems.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Pilot Reuse in Cell-Free Massive MIMO Systems: A Diverse Clustering Approach
Authors:
Salman Mohebi,
Andrea Zanella,
Michele Zorzi
Abstract:
Distributed or Cell-free (CF) massive Multiple-Input, Multiple-Output (mMIMO), has been recently proposed as an answer to the limitations of the current network-centric systems in providing high-rate ubiquitous transmission. The capability of providing uniform service level makes CF mMIMO a potential technology for beyond-5G and 6G networks. The acquisition of accurate Channel State Information (C…
▽ More
Distributed or Cell-free (CF) massive Multiple-Input, Multiple-Output (mMIMO), has been recently proposed as an answer to the limitations of the current network-centric systems in providing high-rate ubiquitous transmission. The capability of providing uniform service level makes CF mMIMO a potential technology for beyond-5G and 6G networks. The acquisition of accurate Channel State Information (CSI) is critical for different CF mMIMO operations. Hence, an uplink pilot training phase is used to efficiently estimate transmission channels. The number of available orthogonal pilot signals is limited, and reusing these pilots will increase co-pilot interference. This causes an undesirable effect known as pilot contamination that could reduce the system performance. Hence, a proper pilot reuse strategy is needed to mitigate the effects of pilot contamination. In this paper, we formulate pilot assignment in CF mMIMO as a diverse clustering problem and propose an iterative maxima search scheme to solve it. In this approach, we first form the clusters of User Equipments (UEs) so that the intra-cluster diversity maximizes and then assign the same pilots for all UEs in the same cluster. The numerical results show the proposed techniques' superiority over other methods concerning the achieved uplink and downlink average and per-user data rate.
△ Less
Submitted 17 December, 2022;
originally announced December 2022.
-
Hidden Factor estimation in Dynamic Generalized Factor Analysis Models
Authors:
Giorgio Picci,
Lucia Falconi,
Augusto Ferrante,
Mattia Zorzi
Abstract:
This paper deals with the estimation of the hidden factor in Dynamic Generalized Factor Analysis via a generalization of Kalman filtering. Asymptotic consistency is discussed and it is shown that the Kalman one-step predictor is not the right tool while the pure filter yields a consistent estimate.
This paper deals with the estimation of the hidden factor in Dynamic Generalized Factor Analysis via a generalization of Kalman filtering. Asymptotic consistency is discussed and it is shown that the Kalman one-step predictor is not the right tool while the pure filter yields a consistent estimate.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Distributed Resource Allocation for URLLC in IIoT Scenarios: A Multi-Armed Bandit Approach
Authors:
Francesco Pase,
Marco Giordani,
Giampaolo Cuozzo,
Sara Cavallero,
Joseph Eichinger,
Roberto Verdone,
Michele Zorzi
Abstract:
This paper addresses the problem of enabling inter-machine Ultra-Reliable Low-Latency Communication (URLLC) in future 6G Industrial Internet of Things (IIoT) networks. As far as the Radio Access Network (RAN) is concerned, centralized pre-configured resource allocation requires scheduling grants to be disseminated to the User Equipments (UEs) before uplink transmissions, which is not efficient for…
▽ More
This paper addresses the problem of enabling inter-machine Ultra-Reliable Low-Latency Communication (URLLC) in future 6G Industrial Internet of Things (IIoT) networks. As far as the Radio Access Network (RAN) is concerned, centralized pre-configured resource allocation requires scheduling grants to be disseminated to the User Equipments (UEs) before uplink transmissions, which is not efficient for URLLC, especially in case of flexible/unpredictable traffic. To alleviate this burden, we study a distributed, user-centric scheme based on machine learning in which UEs autonomously select their uplink radio resources without the need to wait for scheduling grants or preconfiguration of connections. Using simulation, we demonstrate that a Multi-Armed Bandit (MAB) approach represents a desirable solution to allocate resources with URLLC in mind in an IIoT environment, in case of both periodic and aperiodic traffic, even considering highly populated networks and aggressive traffic.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
System Architecture and Communication Infrastructure for the RoboVaaS project
Authors:
Emanuele Coccolo,
Cosmin Delea,
Fabian Steinmetz,
Roberto Francescon,
Alberto Signori,
Ching Nok Au,
Filippo Campagnaro,
Vincent Schneider,
Federico Favaro,
Johannes Oeffner,
Christian Renner,
Michele Zorzi
Abstract:
Current advancements in waterborne autonomous systems, together with the development of cloud-based service-oriented architectures and the recent availability of low-cost underwater acoustic modems and long-range above water wireless devices, enabled the development of new applications to support ships and port activities. Unmanned Surface Vehicle (USV) can, for instance, be used to perform bathym…
▽ More
Current advancements in waterborne autonomous systems, together with the development of cloud-based service-oriented architectures and the recent availability of low-cost underwater acoustic modems and long-range above water wireless devices, enabled the development of new applications to support ships and port activities. Unmanned Surface Vehicle (USV) can, for instance, be used to perform bathymetry and environmental data collection tasks to ensure under-keel clearance and to monitor the quality of the water. Similarly, Remotely Operated Vehicles (ROVs) can be deployed to inspect ship hulls and typical port infrastructure elements, such as quay and sheet pilling walls. In this paper we present the complete system deployed for the small-scale demonstrations of the Robotic Vessels as-a-Service (RoboVaaS) project, which introduces an on-demand service-based cloud system that dispatches Unmanned Vehicles (UVs) capable of performing the required service either autonomously or piloted. These vessels are able to interact with sensors deployed in the port and with the shore station through an integrated underwater and above water network. The developed system has been validated through sea trials and showcased through an underwater sensor data collection service. The results of the test presented in this paper provide a proof-of-concept of the system design and indicate its technical feasibility. It also shows the need for further developments for a mature technology allowing on-demand robotic maritime assistance services in real operational scenarios.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
An Open Framework to Model Diffraction by Dynamic Blockers in Millimeter Wave Simulations
Authors:
Paolo Testolina,
Mattia Lecci,
Alessandro Traspadini,
Michele Zorzi
Abstract:
The millimeter wave (mmWave) band will be exploited to address the growing demand for high data rates and low latency. The higher frequencies, however, are prone to limitations on the propagation of the signal in the environment. Thus, highly directional beamforming is needed to increase the antenna gain. Another crucial problem of the mmWave frequencies is their vulnerability to blockage by physi…
▽ More
The millimeter wave (mmWave) band will be exploited to address the growing demand for high data rates and low latency. The higher frequencies, however, are prone to limitations on the propagation of the signal in the environment. Thus, highly directional beamforming is needed to increase the antenna gain. Another crucial problem of the mmWave frequencies is their vulnerability to blockage by physical obstacles. To this aim, we studied the problem of modeling the impact of second-order effects on mmWave channels, specifically the susceptibility of the mmWave signals to physical blockers. With respect to existing works on this topic, our project focuses on scenarios where mmWaves interact with multiple, dynamic blockers. Our open source software includes diffraction-based blockage models and interfaces directly with an open source Radio Frequency (RF) ray-tracing software.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
Temporal Characterization of VR Traffic for Network Slicing Requirement Definition
Authors:
Federico Chiariotti,
Matteo Drago,
Paolo Testolina,
Mattia Lecci,
Andrea Zanella,
Michele Zorzi
Abstract:
Over the past few years, the concept of VR has attracted increasing interest thanks to its extensive industrial and commercial applications. Currently, the 3D models of the virtual scenes are generally stored in the VR visor itself, which operates as a standalone device. However, applications that entail multi-party interactions will likely require the scene to be processed by an external server a…
▽ More
Over the past few years, the concept of VR has attracted increasing interest thanks to its extensive industrial and commercial applications. Currently, the 3D models of the virtual scenes are generally stored in the VR visor itself, which operates as a standalone device. However, applications that entail multi-party interactions will likely require the scene to be processed by an external server and then streamed to the visors. However, the stringent Quality of Service (QoS) constraints imposed by VR's interactive nature require Network Slicing (NS) solutions, for which profiling the traffic generated by the VR application is crucial. To this end, we collected more than 4 hours of traces in a real setup and analyzed their temporal correlation. More specifically, we focused on the CBR encoding mode, which should generate more predictable traffic streams. From the collected data, we then distilled two prediction models for future frame size, which can be instrumental in the design of dynamic resource allocation algorithms. Our results show that even the state-of-the-art H.264 CBR mode can have significant fluctuations, which can impact the NS optimization. We then exploited the proposed models to dynamically determine the Service Level Agreement (SLA) parameters in an NS scenario, providing service with the required QoS while minimizing resource usage.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Repulsive Clustering Based Pilot Assignment for Cell-Free Massive MIMO Systems
Authors:
Salman Mohebi,
Andrea Zanella,
Michele Zorzi
Abstract:
Thanks to its capability to provide a uniform service rate for the User Equipments (UEs), Cell-free (CF) massive Multiple-Input, Multiple-Output (mMIMO), has recently attracted considerable attention, both in academia and in industry, and so is considered as one of the potential technologies for beyond-5G and 6G. However, the reuse of the same pilot signals by multiple users can create the so-call…
▽ More
Thanks to its capability to provide a uniform service rate for the User Equipments (UEs), Cell-free (CF) massive Multiple-Input, Multiple-Output (mMIMO), has recently attracted considerable attention, both in academia and in industry, and so is considered as one of the potential technologies for beyond-5G and 6G. However, the reuse of the same pilot signals by multiple users can create the so-called pilot contamination problem, which can hinder the CF mMIMO from unlocking its full performance. In this paper, we address the challenge by formulating the pilot assignment as a maximally diverse clustering problem and propose an efficient yet straightforward repulsive clustering-based pilot assignment scheme to mitigate the effects of pilot contamination on CF mMIMO. The numerical results show the superiority of the proposed technique compared to some other methods with respect to the achieved uplink per-user rate.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
End-to-End Simulation of 5G Networks Assisted by IRS and AF Relays
Authors:
Matteo Pagin,
Marco Giordani,
Amir Ashtari Gargari,
Alberto Rech,
Federico Moretto,
Stefano Tomasin,
Jonathan Gambini,
Michele Zorzi
Abstract:
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the…
▽ More
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the research community has been investigating Intelligent Reflective Surfaces (IRSs) and Amplify-and-Forward (AF) relays as more energy-efficient alternatives to solve coverage issues in 5G scenarios. Along these lines, this paper relies on a new simulation framework, based on ns-3, to simulate IRS/AF systems with a full-stack, end-to-end perspective, with considerations on to the impact of the channel model and the protocol stack of 5G NR networks. Our goal is to demonstrate whether these technologies can be used to relay 5G traffic requests and, if so, how to dimension IRS/AF nodes as a function of the number of end users.
△ Less
Submitted 4 March, 2022; v1 submitted 2 March, 2022;
originally announced March 2022.
-
UAV/HAP-Assisted Vehicular Edge Computing in 6G: Where and What to Offload?
Authors:
Alessandro Traspadini,
Marco Giordani,
Michele Zorzi
Abstract:
In the context of 6th generation (6G) networks, vehicular edge computing (VEC) is emerging as a promising solution to let battery-powered ground vehicles with limited computing and storage resources offload processing tasks to more powerful devices. Given the dynamic vehicular environment, VEC systems need to be as flexible, intelligent, and adaptive as possible. To this aim, in this paper we stud…
▽ More
In the context of 6th generation (6G) networks, vehicular edge computing (VEC) is emerging as a promising solution to let battery-powered ground vehicles with limited computing and storage resources offload processing tasks to more powerful devices. Given the dynamic vehicular environment, VEC systems need to be as flexible, intelligent, and adaptive as possible. To this aim, in this paper we study the opportunity to realize VEC via non-terrestrial networks (NTNs), where ground vehicles offload resource-hungry tasks to Unmanned Aerial Vehicles (UAVs), High Altitude Platforms (HAPs), or a combination of the two. We define an optimization problem in which tasks are modeled as a Poisson arrival process, and apply queuing theory to find the optimal offloading factor in the system. Numerical results show that aerial-assisted VEC is feasible even in dense networks, provided that high-capacity HAP/UAV platforms are available.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Temporal Characterization of XR Traffic with Application to Predictive Network Slicing
Authors:
Mattia Lecci,
Federico Chiariotti,
Matteo Drago,
Andrea Zanella,
Michele Zorzi
Abstract:
Over the past few years, eXtended Reality (XR) has attracted increasing interest thanks to its extensive industrial and commercial applications, and its popularity is expected to rise exponentially over the next decade. However, the stringent Quality of Service (QoS) constraints imposed by XR's interactive nature require Network Slicing (NS) solutions to support its use over wireless connections:…
▽ More
Over the past few years, eXtended Reality (XR) has attracted increasing interest thanks to its extensive industrial and commercial applications, and its popularity is expected to rise exponentially over the next decade. However, the stringent Quality of Service (QoS) constraints imposed by XR's interactive nature require Network Slicing (NS) solutions to support its use over wireless connections: in this context, quasi-Constant Bit Rate (CBR) encoding is a promising solution, as it can increase the predictability of the stream, making the network resource allocation easier. However, traffic characterization of XR streams is still a largely unexplored subject, particularly with this encoding. In this work, we characterize XR streams from more than 4 hours of traces captured in a real setup, analyzing their temporal correlation and proposing two prediction models for future frame size. Our results show that even the state-of-the-art H.264 CBR mode can have significant frame size fluctuations, which can impact the NS optimization. Our proposed prediction models can be applied to different traces, and even to different contents, achieving very similar performance. We also show the trade-off between network resource efficiency and XR QoS in a simple NS use case.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Full-stack Comparison of Channel Models for Networks Above 100 GHz in an Indoor Scenario
Authors:
Amir Ashtari Gargari,
Michele Polese,
Michele Zorzi
Abstract:
The Sixth Generation (6G) of mobile networks is expected to use carrier frequencies in the spectrum above 100 GHz, to satisfy the demands for higher data rates and bandwidth of future digital applications. The development of networking solutions at such high frequencies is challenged by the harsh propagation environment, and by the need for directional communications and signal processing at high…
▽ More
The Sixth Generation (6G) of mobile networks is expected to use carrier frequencies in the spectrum above 100 GHz, to satisfy the demands for higher data rates and bandwidth of future digital applications. The development of networking solutions at such high frequencies is challenged by the harsh propagation environment, and by the need for directional communications and signal processing at high data rates. A fundamental step in defining and develo** wireless networks above 100 GHz is given by an accurate performance evaluation. For simulations, this strongly depends on the accuracy of the modeling of the channel and of the interaction with the higher layers of the stack. This paper introduces the implementation of two recently proposed channel models (based on ray tracing and on a fully stochastic model) for the 140 GHz band for the ns-3 TeraSim module, which enables simulation of macro wireless networks in the sub-terahertz and terahertz spectrum. We also compare the two channel models with full-stack simulations in an indoor scenario, highlighting differences and similarities in how they interact with the protocol stack and antenna model of TeraSim.
△ Less
Submitted 13 October, 2021;
originally announced October 2021.
-
5G NR-Light at Millimeter Waves: Design Guidelines for Mid-Market IoT Use Cases
Authors:
Matteo Pagin,
Tommaso Zugno,
Marco Giordani,
Louis-Adrien Dufrene,
Quentin Lampin,
Michele Zorzi
Abstract:
5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower co…
▽ More
5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower complexity, energy efficient, mid-market Internet of Things (IoT) applications is still an on-going investigation, currently led by the 3GPP which is extending the NR standard with NR-Light specifications to support devices with reduced capabilities (REDCAP). While REDCAP devices may also operate at mmWaves to improve the network performance, hardware/software simplifications are needed to support balanced and mixed requirements compared to 5G NR systems. In this context, the contributions of this paper are threefold. First, we present some NR-Light use cases for which the support of the mmWave bands is desirable. Second, we describe how 5G NR can be simplified to achieve NR-Light requirements and expectations. Finally, we evaluate via simulation the performance of NR-Light devices operating at mmWaves in an industrial IoT setup, in terms of cost and complexity, throughput, and latency.
△ Less
Submitted 9 January, 2023; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Energy-Efficient Design for RIS-assisted UAVcommunications in beyond-5G Networks
Authors:
Anay Ajit Deshpande,
Cristian J. Vaca-Rubio,
Salman Mohebi,
Dariush Salami,
Elisabeth de Carvalho,
Petar Popovski,
Stephan Sigg,
Michele Zorzi,
Andrea Zanella
Abstract:
The usage of Reconfigurable Intelligent Surfaces (RIS) in conjunction with Unmanned Ariel Vehicles (UAVs) is being investigated as a way to provide energy-efficient communication to ground users in dense urban areas. In this paper, we devise an optimization scenario to reduce overall energy consumption in the network while guaranteeing certain Quality of Service (QoS) to the ground users in the ar…
▽ More
The usage of Reconfigurable Intelligent Surfaces (RIS) in conjunction with Unmanned Ariel Vehicles (UAVs) is being investigated as a way to provide energy-efficient communication to ground users in dense urban areas. In this paper, we devise an optimization scenario to reduce overall energy consumption in the network while guaranteeing certain Quality of Service (QoS) to the ground users in the area. Due to the complex nature of the optimization problem, we provide a joint UAV trajectory and RIS phase decision to minimize transmission power of the UAV and Base Station (BS) that yields good performance with lower complexity. So, the proposed method uses a Successive Convex Approximation (SCA) to iteratively determine a joint optimal solution for UAV Trajectory, RIS phase and BS and UAV Transmission Power. The approach has, therefore, been analytically evaluated under different sets of criterion.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
An Open Framework for Analyzing and Modeling XR Network Traffic
Authors:
Mattia Lecci,
Matteo Drago,
Andrea Zanella,
Michele Zorzi
Abstract:
Thanks to recent advancements in the technology, eXtended Reality (XR) applications are gaining a lot of momentum, and they will surely become increasingly popular in the next decade. These new applications, however, require a step forward also in terms of models to simulate and analyze this type of traffic sources in modern communication networks, in order to guarantee to the users state of the a…
▽ More
Thanks to recent advancements in the technology, eXtended Reality (XR) applications are gaining a lot of momentum, and they will surely become increasingly popular in the next decade. These new applications, however, require a step forward also in terms of models to simulate and analyze this type of traffic sources in modern communication networks, in order to guarantee to the users state of the art performance and Quality of Experience (QoE). Recognizing this need, in this work, we present a novel open-source traffic model, which researchers can use as a starting point both for improvements of the model itself and for the design of optimized algorithms for the transmission of these peculiar data flows. Along with the mathematical model and the code, we also share with the community the traces that we gathered for our study, collected from freely available applications such as Minecraft VR, Google Earth VR, and Virus Popper. Finally, we propose a roadmap for the construction of an end-to-end framework that fills this gap in the current state of the art.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
A Full-Stack Open-Source Framework for Antenna and Beamforming Evaluation in mmWave 5G NR
Authors:
Mattia Lecci,
Tommaso Zugno,
Silvia Zampato,
Michele Zorzi
Abstract:
Millimeter wave (mmWave) communication represents one of the main innovations of the next generation of wireless technologies, allowing users to reach unprecedented data rates. To overcome the high path loss at mmWave frequencies, these systems make use of directional antennas able to focus the transmit power into narrow beams using BeamForming (BF) techniques, thus making the communication direct…
▽ More
Millimeter wave (mmWave) communication represents one of the main innovations of the next generation of wireless technologies, allowing users to reach unprecedented data rates. To overcome the high path loss at mmWave frequencies, these systems make use of directional antennas able to focus the transmit power into narrow beams using BeamForming (BF) techniques, thus making the communication directional. This new paradigm opens up a set of challenges for the design of efficient wireless systems, in which antenna and BF components play an important role also at the higher layer of the protocol stack. For this reason, accurate modeling of these components in a full-stack simulation is of primary importance to understand the overall system behavior. This paper proposes a novel framework for the end-to-end simulation of 5G mmWave cellular networks, including a ray-tracing based channel model and accurate models for antenna arrays and BF schemes. We showcase this framework by evaluating the performance of different antenna and BF configurations considering both link-level and end-to-end metrics and present the obtained results.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
On the Beamforming Design of Millimeter Wave UAV Networks: Power vs. Capacity Trade-Offs
Authors:
Yang Wang,
Marco Giordani,
Michele Zorzi
Abstract:
The millimeter wave (mmWave) technology enables unmanned aerial vehicles (UAVs) to offer broadband high-speed wireless connectivity in fifth generation (5G) and beyond (6G) networks. However, the limited footprint of a single UAV implementing analog beamforming (ABF) requires multiple aerial stations to operate in swarms to provide ubiquitous network coverage, thereby posing serious constraints in…
▽ More
The millimeter wave (mmWave) technology enables unmanned aerial vehicles (UAVs) to offer broadband high-speed wireless connectivity in fifth generation (5G) and beyond (6G) networks. However, the limited footprint of a single UAV implementing analog beamforming (ABF) requires multiple aerial stations to operate in swarms to provide ubiquitous network coverage, thereby posing serious constraints in terms of battery power consumption and swarm management. A possible remedy is to investigate the concept of hybrid beamforming (HBF) transceivers, which use a combination of analog beamformers as a solution to achieve higher flexibility in the beamforming design. This approach permits multiple ground users to be served simultaneously by the same UAV station, despite involving higher energy consumption in the radio frequency (RF) domain than its ABF counterpart. This paper presents a tractable stochastic analysis to characterize the downlink ergodic capacity and power consumption of UAV mmWave networks in an urban scenario, focusing on the trade-off between ABF and HBF architectures. A multi-beam coverage model is derived as a function of several UAV-specific parameters, including the number of UAVs, the deployment altitude, the antenna configuration, and the beamforming design. Our results, validated by simulation, show that, while ABF achieves better ergodic capacity at high altitudes, an HBF configuration with multiple beams, despite the use of more power-hungry RF blocks, consumes less power all the time with limited capacity degradation.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Full-stack Hybrid Beamforming in mmWave 5G Networks
Authors:
Felipe Gomez-Cuba,
Tommaso Zugno,
Junseok Kim,
Michele Polese,
Saewoong Bahk,
Michele Zorzi
Abstract:
This paper analyzes Hybrid Beamforming (HBF) and Multi-User Multiple-Input Multiple-Output (MU-MIMO) in millimeter wave (mmWave) 5th generation (5G) cellular networks considering the full protocol stack with TCP/IP traffic and MAC scheduling. Prior work on HBF and MU-MIMO has assumed full-buffer transmissions and studied link-level performance. We report non-trivial interactions between the HBF te…
▽ More
This paper analyzes Hybrid Beamforming (HBF) and Multi-User Multiple-Input Multiple-Output (MU-MIMO) in millimeter wave (mmWave) 5th generation (5G) cellular networks considering the full protocol stack with TCP/IP traffic and MAC scheduling. Prior work on HBF and MU-MIMO has assumed full-buffer transmissions and studied link-level performance. We report non-trivial interactions between the HBF technique, the front-loaded channel estimation pilot scheme in NR, and the constraints of MU-MIMO scheduling. We also report that joint multi-user beamforming design is imperative, in the sense that the MU-MIMO system cannot be fully exploited when implemented as a mere collection of single-user analog beams working in parallel. By addressing these issues, throughput can be dramatically increased in mmWave 5G networks by means of Spatial Division Multiple Access (SDMA).
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Accuracy vs. Complexity for mmWave Ray-Tracing: A Full Stack Perspective
Authors:
Mattia Lecci,
Paolo Testolina,
Michele Polese,
Marco Giordani,
Michele Zorzi
Abstract:
The millimeter wave (mmWave) band will provide multi-gigabits-per-second connectivity in the radio access of future wireless systems. The high propagation loss in this portion of the spectrum calls for the deployment of large antenna arrays to compensate for the loss through high directional gain, thus introducing a spatial dimension in the channel model to accurately represent the performance of…
▽ More
The millimeter wave (mmWave) band will provide multi-gigabits-per-second connectivity in the radio access of future wireless systems. The high propagation loss in this portion of the spectrum calls for the deployment of large antenna arrays to compensate for the loss through high directional gain, thus introducing a spatial dimension in the channel model to accurately represent the performance of a mmWave network. In this perspective, ray-tracing can characterize the channel in terms of Multi Path Components (MPCs) to provide a highly accurate model, at the price of extreme computational complexity (e.g., for processing detailed environment information about the propagation), which limits the scalability of the simulations. In this paper, we present possible simplifications to improve the trade-off between accuracy and complexity in ray-tracing simulations at mmWaves by reducing the total number of MPCs. The effect of such simplifications is evaluated from a full-stack perspective through end-to-end simulations, testing different configuration parameters, propagation scenarios, and higher-layer protocol implementations. We then provide guidelines on the optimal degree of simplification, for which it is possible to reduce the complexity of simulations with a minimal reduction in accuracy for different deployment scenarios.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
User Selection in Millimeter Wave Massive MIMO System using Convolutional Neural Networks
Authors:
Salman Khalid,
Waqas bin Abbas,
Farhan Khalid,
Michele Zorzi
Abstract:
A hybrid architecture for millimeter wave (mmW) massive MIMO systems is considered practically implementable due to low power consumption and high energy efficiency. However, due to the limited number of RF chains, user selection becomes necessary for such architecture. Traditional user selection algorithms suffer from high computational complexity and, therefore, may not be scalable in 5G and bey…
▽ More
A hybrid architecture for millimeter wave (mmW) massive MIMO systems is considered practically implementable due to low power consumption and high energy efficiency. However, due to the limited number of RF chains, user selection becomes necessary for such architecture. Traditional user selection algorithms suffer from high computational complexity and, therefore, may not be scalable in 5G and beyond wireless mobile communications. To address this issue, in this letter we propose a low complexity CNN framework for user selection. The proposed CNN accepts as input the channel matrix and gives as output the selected users. Simulation results show that the proposed CNN performs close to optimal exhaustive search in terms of achievable rate, with negligible computational complexity. In addition, CNN based user selection outperforms the evolutionary algorithm and the greedy algorithm in terms of both achievable rate and computational complexity. Finally, simulation results also show that the proposed CNN based user selection scheme is robust to channel imperfections.
△ Less
Submitted 30 June, 2020;
originally announced June 2020.
-
Quasi-Deterministic Channel Model for mmWaves: Mathematical Formalization and Validation
Authors:
Mattia Lecci,
Michele Polese,
Chieh** Lai,
Jian Wang,
Camillo Gentile,
Nada Golmie,
Michele Zorzi
Abstract:
5G and beyond networks will use, for the first time ever, the millimeter wave (mmWave) spectrum for mobile communications. Accurate performance evaluation is fundamental to the design of reliable mmWave networks, with accuracy rooted in the fidelity of the channel models. At mmWaves, the model must account for the spatial characteristics of propagation since networks will employ highly directional…
▽ More
5G and beyond networks will use, for the first time ever, the millimeter wave (mmWave) spectrum for mobile communications. Accurate performance evaluation is fundamental to the design of reliable mmWave networks, with accuracy rooted in the fidelity of the channel models. At mmWaves, the model must account for the spatial characteristics of propagation since networks will employ highly directional antennas to counter the much greater pathloss. In this regard, Quasi-Deterministic (QD) models are highly accurate channel models, which characterize the propagation in terms of clusters of multipath components, given by a reflected ray and multiple diffuse components of any given Computer Aided Design (CAD) scenario. This paper introduces a detailed mathematical formulation for QD models at mmWaves, that can be used as a reference for their implementation and development. Moreover, it compares channel instances obtained with an open source NIST QD model implementation against real measurements at 60 GHz, substantiating the accuracy of the model. Results show that, when comparing the proposed model and deterministic rays alone with a measurement campaign, the Kolmogorov-Smirnov (KS) test of the QD model improves by up to 0.537.
△ Less
Submitted 9 February, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Toward End-to-End, Full-Stack 6G Terahertz Networks
Authors:
Michele Polese,
Josep Jornet,
Tommaso Melodia,
Michele Zorzi
Abstract:
Recent evolutions in semiconductors have brought the terahertz band in the spotlight as an enabler for terabit-per-second communications in 6G networks. Most of the research so far, however, has focused on understanding the physics of terahertz devices, circuitry and propagation, and on studying physical layer solutions. However, integrating this technology in complex mobile networks requires a pr…
▽ More
Recent evolutions in semiconductors have brought the terahertz band in the spotlight as an enabler for terabit-per-second communications in 6G networks. Most of the research so far, however, has focused on understanding the physics of terahertz devices, circuitry and propagation, and on studying physical layer solutions. However, integrating this technology in complex mobile networks requires a proper design of the full communication stack, to address link- and system-level challenges related to network setup, management, coordination, energy efficiency, and end-to-end connectivity. This paper provides an overview of the issues that need to be overcome to introduce the terahertz spectrum in mobile networks, from a MAC, network and transport layer perspective, with considerations on the performance of end-to-end data flows on terahertz connections.
△ Less
Submitted 4 January, 2021; v1 submitted 16 May, 2020;
originally announced May 2020.
-
Millimeter Wave Remove UAV Control and Communications for Public Safety Scenarios
Authors:
William Xia,
Michele Polese,
Marco Mezzavilla,
Giuseppe Loianno,
Sundeep Rangan,
Michele Zorzi
Abstract:
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high throughput and low latency connectivity between the UAV and a remote command center. However, maintaining reliable aerial communication in the mmWave bands is challeng…
▽ More
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high throughput and low latency connectivity between the UAV and a remote command center. However, maintaining reliable aerial communication in the mmWave bands is challenging due to the need to support high speed beam tracking and overcome blockage. This paper provides a simulation study aimed at assessing the feasibility of public safety UAV connectivity through a 5G link at 28 GHz. Real flight motion traces are captured during maneuvers similar to those expected in public safety settings. The motions traces are then incorporated into a detailed mmWave network simulator that models the channel, blockage, beamforming and full 3GPP protocol stack. We show that 5G mmWave communications can deliver throughput up to 1 Gbps with consistent sub ms latency when the base station is located near the mission area, enabling remote offloading of the UAV control and perception algorithms.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
M$^2$-Spectral Estimation: A Flexible Approach Ensuring Rational Solutions
Authors:
Bin Zhu,
Augusto Ferrante,
Johan Karlsson,
Mattia Zorzi
Abstract:
This paper concerns a spectral estimation problem for multivariate (i.e., vector-valued) signals defined on a multidimensional domain, abbreviated as M$^2$. The problem is posed as solving a finite number of trigonometric moment equations for a nonnegative matricial measure, which is well known as the \emph{covariance extension problem} in the literature of systems and control. This inverse proble…
▽ More
This paper concerns a spectral estimation problem for multivariate (i.e., vector-valued) signals defined on a multidimensional domain, abbreviated as M$^2$. The problem is posed as solving a finite number of trigonometric moment equations for a nonnegative matricial measure, which is well known as the \emph{covariance extension problem} in the literature of systems and control. This inverse problem and its various generalizations have been extensively studied in the past three decades, and they find applications in diverse fields such as modeling and system identification, signal and image processing, robust control, circuit theory, etc. In this paper, we address the challenging M$^2$ version of the problem, and elaborate on a solution technique via convex optimization with the $τ$-divergence family. As a major contribution of this work, we show that by properly choosing the parameter of the divergence index, the optimal spectrum is a rational function, that is, the solution is a spectral density which can be represented by a finite-dimensional system, as desired in many practical applications.
△ Less
Submitted 12 October, 2021; v1 submitted 30 April, 2020;
originally announced April 2020.
-
Coverage Analysis of UAVs in Millimeter Wave Networks: A Stochastic Geometry Approach
Authors:
Matilde Boschiero,
Marco Giordani,
Michele Polese,
Michele Zorzi
Abstract:
Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV…
▽ More
Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV context, however, mmWave operations may incur severe signal attenuation and sensitivity to blockage, especially considering the very long transmission distances involved. In this paper, we present a tractable stochastic analysis to characterize the coverage probability of UAV stations operating at mmWaves. We exemplify some of the trade-offs to be considered when designing solutions for millimeter wave (mmWave) scenarios, such as the beamforming configuration, and the UAV altitude and deployment.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Implementation of A Spatial Channel Model for ns-3
Authors:
Tommaso Zugno,
Michele Polese,
Natale Patriciello,
Biljana Bojović,
Sandra Lagen,
Michele Zorzi
Abstract:
The next generation of wireless networks will feature a more flexible radio access design, integrating multiple new technological solutions (e.g., massive Multiple-Input Multiple-Output (MIMO), millimeter waves) to satisfy different verticals and use cases. The performance evaluation of these networks will require more complex models to represent the interactions of different components of the net…
▽ More
The next generation of wireless networks will feature a more flexible radio access design, integrating multiple new technological solutions (e.g., massive Multiple-Input Multiple-Output (MIMO), millimeter waves) to satisfy different verticals and use cases. The performance evaluation of these networks will require more complex models to represent the interactions of different components of the networks accurately. For example, channel models, which are of paramount importance to precisely characterize the behavior of such systems, need to account for multi-antenna systems and new frequency bands. This paper presents the ns-3 implementation of a spatial channel model for the 0.5-100 GHz spectrum, following the 3GPP Technical Report 38.901. The code, designed to be flexible and easily extensible, is integrated in ns-3's antenna, propagation and spectrum models, and offers the support for the investigation of future wireless systems in ns-3.
△ Less
Submitted 19 May, 2020; v1 submitted 21 February, 2020;
originally announced February 2020.
-
Simplified Ray Tracing for the Millimeter Wave Channel: A Performance Evaluation
Authors:
Mattia Lecci,
Paolo Testolina,
Marco Giordani,
Michele Polese,
Tanguy Ropitault,
Camillo Gentile,
Neeraj Varshney,
Anuraag Bodi,
Michele Zorzi
Abstract:
Millimeter-wave (mmWave) communication is one of the cornerstone innovations of fifth-generation (5G) wireless networks, thanks to the massive bandwidth available in these frequency bands. To correctly assess the performance of such systems, however, it is essential to have reliable channel models, based on a deep understanding of the propagation characteristics of the mmWave signal. In this respe…
▽ More
Millimeter-wave (mmWave) communication is one of the cornerstone innovations of fifth-generation (5G) wireless networks, thanks to the massive bandwidth available in these frequency bands. To correctly assess the performance of such systems, however, it is essential to have reliable channel models, based on a deep understanding of the propagation characteristics of the mmWave signal. In this respect, ray tracers can provide high accuracy, at the expense of a significant computational complexity, which limits the scalability of simulations. To address this issue, in this paper we present possible simplifications that can reduce the complexity of ray tracing in the mmWave environment, without significantly affecting the accuracy of the model. We evaluate the effect of such simplifications on link-level metrics, testing different configuration parameters and propagation scenarios.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
Combining LoRaWAN and a New 3D Motion Model for Remote UAV Tracking
Authors:
Federico Mason,
Federico Chiariotti,
Martina Capuzzo,
Davide Magrin,
Andrea Zanella,
Michele Zorzi
Abstract:
Over the last few years, the many uses of Unmanned Aerial Vehicles (UAVs) have captured the interest of both the scientific and the industrial communities. A typical scenario consists in the use of UAVs for surveillance or target-search missions over a wide geographical area. In this case, it is fundamental for the command center to accurately estimate and track the trajectories of the UAVs by exp…
▽ More
Over the last few years, the many uses of Unmanned Aerial Vehicles (UAVs) have captured the interest of both the scientific and the industrial communities. A typical scenario consists in the use of UAVs for surveillance or target-search missions over a wide geographical area. In this case, it is fundamental for the command center to accurately estimate and track the trajectories of the UAVs by exploiting their periodic state reports. In this work, we design an ad hoc tracking system that exploits the Long Range Wide Area Network (LoRaWAN) standard for communication and an extended version of the Constant Turn Rate and Acceleration (CTRA) motion model to predict drone movements in a 3D environment. Simulation results on a publicly available dataset show that our system can reliably estimate the position and trajectory of a UAV, significantly outperforming baseline tracking approaches.
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
-
Non-Terrestrial Networks in the 6G Era: Challenges and Opportunities
Authors:
Marco Giordani,
Michele Zorzi
Abstract:
Many organizations recognize non-terrestrial networks (NTNs) as a key component to provide cost-effective and high-capacity connectivity in future 6th generation (6G) wireless networks. Despite this premise, there are still many questions to be answered for proper network design, including those associated to latency and coverage constraints. In this paper, after reviewing research activities on N…
▽ More
Many organizations recognize non-terrestrial networks (NTNs) as a key component to provide cost-effective and high-capacity connectivity in future 6th generation (6G) wireless networks. Despite this premise, there are still many questions to be answered for proper network design, including those associated to latency and coverage constraints. In this paper, after reviewing research activities on NTNs, we present the characteristics and enabling technologies of NTNs in the 6G landscape and shed light on the challenges in the field that are still open for future research. As a case study, we evaluate the performance of an NTN scenario in which aerial/space vehicles use millimeter wave (mmWave) frequencies to provide access connectivity to on-the-ground mobile terminals as a function of different networking configurations.
△ Less
Submitted 26 April, 2021; v1 submitted 21 December, 2019;
originally announced December 2019.
-
An Adaptive Broadcasting Strategy for Efficient Dynamic Map** in Vehicular Networks
Authors:
Federico Mason,
Marco Giordani,
Federico Chiariotti,
Andrea Zanella,
Michele Zorzi
Abstract:
In this work, we face the issue of achieving an efficient dynamic map** in vehicular networking scenarios, i.e., to obtain an accurate estimate of the positions and trajectories of connected vehicles in a certain area. State of the art solutions are based on the periodic broadcasting of the position information of the network nodes, with an inter-transmission period set by a congestion control s…
▽ More
In this work, we face the issue of achieving an efficient dynamic map** in vehicular networking scenarios, i.e., to obtain an accurate estimate of the positions and trajectories of connected vehicles in a certain area. State of the art solutions are based on the periodic broadcasting of the position information of the network nodes, with an inter-transmission period set by a congestion control scheme. However, the movements and maneuvers of vehicles can often be erratic, making transmitted data inaccurate or downright misleading. To address this problem, we propose to adopt a dynamic transmission scheme based on the actual positioning error, sending new data when the estimate passes a preset error threshold. Furthermore, the proposed method adapts the error threshold to the operational context according to a congestion control algorithm that limits the collision probability among broadcast packet transmissions. This threshold-based strategy can reduce the network load by avoiding the transmission of redundant messages, and is shown to improve the overall positioning accuracy by more than 20% in realistic urban scenarios.
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
M$^2$-Spectral Estimation: A Relative Entropy Approach
Authors:
Bin Zhu,
Augusto Ferrante,
Johan Karlsson,
Mattia Zorzi
Abstract:
This paper deals with M$^2$-signals, namely multivariate (or vector-valued) signals defined over a multidimensional domain. In particular, we propose an optimization technique to solve the covariance extension problem for stationary random vector fields. The multidimensional Itakura-Saito distance is employed as an optimization criterion to select the solution among the spectra satisfying a finite…
▽ More
This paper deals with M$^2$-signals, namely multivariate (or vector-valued) signals defined over a multidimensional domain. In particular, we propose an optimization technique to solve the covariance extension problem for stationary random vector fields. The multidimensional Itakura-Saito distance is employed as an optimization criterion to select the solution among the spectra satisfying a finite number of moment constraints. In order to avoid technicalities that may happen on the boundary of the feasible set, we deal with the discrete version of the problem where the multidimensional integrals are approximated by Riemann sums. The spectrum solution is also discrete, which occurs naturally when the underlying random field is periodic. We show that a solution to the discrete problem exists, is unique and depends smoothly on the problem data. Therefore, we have a well-posed problem whose solution can be tuned in a smooth manner. Finally, we have applied our theory to the target parameter estimation problem in an integrated system of automotive modules. Simulation results show that our spectral estimator has promising performance.
△ Less
Submitted 16 September, 2020; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Fusion of Sensors Data in Automotive Radar Systems: A Spectral Estimation Approach
Authors:
Bin Zhu,
Augusto Ferrante,
Johan Karlsson,
Mattia Zorzi
Abstract:
To accurately estimate locations and velocities of surrounding targets (cars) is crucial for advanced driver assistance systems based on radar sensors. In this paper we derive methods for fusing data from multiple radar sensors in order to improve the accuracy and robustness of such estimates. First we pose the target estimation problem as a multivariate multidimensional spectral estimation proble…
▽ More
To accurately estimate locations and velocities of surrounding targets (cars) is crucial for advanced driver assistance systems based on radar sensors. In this paper we derive methods for fusing data from multiple radar sensors in order to improve the accuracy and robustness of such estimates. First we pose the target estimation problem as a multivariate multidimensional spectral estimation problem. The problem is multivariate since each radar sensor gives rise to a measurement channel. Then we investigate how the use of the cross-spectra affects target estimates. We see that the use of the magnitude of the cross-spectrum significantly improves the accuracy of the target estimates, whereas an attempt to compensate the phase lag of the cross-spectrum only gives marginal improvement. This paper may be viewed as a first step towards applying high-resolution methods that builds on multidimensional multivariate spectral estimation for sensor fusion.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
Path Loss Models for V2V mmWave Communication: Performance Evaluation and Open Challenges
Authors:
Marco Giordani,
Takayuki Shimizu,
Andrea Zanella,
Takamasa Higuchi,
Onur Altintas,
Michele Zorzi
Abstract:
Recently, millimeter wave (mmWave) bands have been investigated as a means to enhance automated driving and address the challenging data rate and latency demands of emerging automotive applications. For the development of those systems to operate in bands above 6 GHz, there is a need to have accurate channel models able to predict the peculiarities of the vehicular propagation at these bands, espe…
▽ More
Recently, millimeter wave (mmWave) bands have been investigated as a means to enhance automated driving and address the challenging data rate and latency demands of emerging automotive applications. For the development of those systems to operate in bands above 6 GHz, there is a need to have accurate channel models able to predict the peculiarities of the vehicular propagation at these bands, especially as far as Vehicle-to-Vehicle (V2V) communications are concerned. In this paper, we validate the channel model that the 3GPP has proposed for NR-V2X systems, which (i) supports deployment scenarios for urban/highway propagation, and (ii) incorporates the effects of path loss, shadowing, line of sight probability, and static/dynamic blockage attenuation. We also exemplify the impact of several automotive-specific parameters on the overall network performance considering realistic system-level simulation assumptions for typical scenarios. Finally, we highlight potential inconsistencies of the model and provide recommendations for future measurement campaigns in vehicular environments.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
A Framework to Assess Value of Information in Future Vehicular Networks
Authors:
Marco Giordani,
Takamasa Higuchi,
Andrea Zanella,
Onur Altintas,
Michele Zorzi
Abstract:
Vehicles are becoming increasingly intelligent and connected, incorporating more and more sensors to support safer and more efficient driving. The large volume of data generated by such sensors, however, will likely saturate the capacity of vehicular communication technologies, making it challenging to guarantee the required quality of service. In this perspective, it is essential to assess the va…
▽ More
Vehicles are becoming increasingly intelligent and connected, incorporating more and more sensors to support safer and more efficient driving. The large volume of data generated by such sensors, however, will likely saturate the capacity of vehicular communication technologies, making it challenging to guarantee the required quality of service. In this perspective, it is essential to assess the value of information (VoI) provided by each data source, to prioritize the transmissions that have the greatest importance for the target applications. In this paper, we propose and evaluate a framework that uses analytic hierarchy multicriteria decision processes to predict VoI based on space, time, and quality attributes. Our results shed light on the impact of the propagation scenario, the sensor resolution, the type of observation, and the communication distance on the value assessment performance. In particular, we show that VoI evolves at different rates as a function of the target application's characteristics.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Low-latency Networking: Where Latency Lurks and How to Tame It
Authors:
Xiaolin Jiang,
Hossein S. Ghadikolaei,
Gabor Fodor,
Eytan Modiano,
Zhibo Pang,
Michele Zorzi,
Carlo Fischione
Abstract:
While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all…
▽ More
While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental performance limitations. We will be able to develop low-latency networks only if we address the problem of these complex interactions from the new point of view of sub-milliseconds latency. In this article, we propose a holistic analysis and classification of the main design principles and enabling technologies that will make it possible to deploy low-latency wireless communication networks. We argue that these design principles and enabling technologies must be carefully orchestrated to meet the stringent requirements and to manage the inherent trade-offs between low latency and traditional performance metrics. We also review currently ongoing standardization activities in prominent standards associations, and discuss open problems for future research.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
The role of noise modeling in the estimation of resting-state brain effective connectivity
Authors:
Giulia Prando,
Mattia Zorzi,
Alessandra Bertoldo,
Alessandro Chiuso
Abstract:
Causal relations among neuronal populations of the brain are studied through the so-called effective connectivity (EC) network. The latter is estimated from EEG or fMRI measurements, by inverting a generative model of the corresponding data. It is clear that the goodness of the estimated network heavily depends on the underlying modeling assumptions. In this present paper we consider the EC estima…
▽ More
Causal relations among neuronal populations of the brain are studied through the so-called effective connectivity (EC) network. The latter is estimated from EEG or fMRI measurements, by inverting a generative model of the corresponding data. It is clear that the goodness of the estimated network heavily depends on the underlying modeling assumptions. In this present paper we consider the EC estimation problem using fMRI data in resting-state condition. Specifically, we investigate on how to model endogenous fluctuations driving the neuronal activity.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Statistical Approaches for Initial Access in mmWave 5G Systems
Authors:
Hossein Soleimani,
Raùl Parada,
Stefano Tomasin,
Michele Zorzi
Abstract:
mmWave communication systems overcome high attenuation by using multiple antennas at both the transmitter and the receiver to perform beamforming. Upon entrance of a user equipment (UE) into a cell a scanning procedure must be performed by the base station in order to find the UE, in what is known as initial access (IA) procedure. In this paper we start from the observation that UEs are more likel…
▽ More
mmWave communication systems overcome high attenuation by using multiple antennas at both the transmitter and the receiver to perform beamforming. Upon entrance of a user equipment (UE) into a cell a scanning procedure must be performed by the base station in order to find the UE, in what is known as initial access (IA) procedure. In this paper we start from the observation that UEs are more likely to enter from some directions than from others, as they typically move along streets, while other movements are impossible due to the presence of obstacles. Moreover, users are entering with a given time statistics, for example described by inter-arrival times. In this context we propose scanning strategies for IA that take into account the entrance statistics. In particular, we propose two approaches: a memory-less random illumination (MLRI) algorithm and a statistic and memory-based illumination (SMBI) algorithm. The MLRI algorithm scans a random sector in each slot, based on the statistics of sector entrance, without memory. The SMBI algorithm instead scans sectors in a deterministic sequence selected according to the statistics of sector entrance and time of entrance, and taking into account the fact that the user has not yet been discovered (thus including memory). We assess the performance of the proposed methods in terms of average discovery time.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Complex Systems Science meets 5G and IoT
Authors:
Nicola Marchetti,
Irene Macaluso,
Nicholas Kaminski,
Merim Dzaferagic,
M. Majid Butt,
Marco Ruffini,
Saul Friedner,
Julie Bradford,
Andrea Zanella,
Michele Zorzi,
Linda Doyle
Abstract:
We propose a new paradigm for telecommunications, and develop a framework drawing on concepts from information (i.e., different metrics of complexity) and computational (i.e., agent based modeling) theory, adapted from complex system science. We proceed in a systematic fashion by dividing network complexity understanding and analysis into different layers. Modelling layer forms the foundation of t…
▽ More
We propose a new paradigm for telecommunications, and develop a framework drawing on concepts from information (i.e., different metrics of complexity) and computational (i.e., agent based modeling) theory, adapted from complex system science. We proceed in a systematic fashion by dividing network complexity understanding and analysis into different layers. Modelling layer forms the foundation of the proposed framework, supporting analysis and tuning layers. The modelling layer aims at capturing the significant attributes of networks and the interactions that shape them, through the application of tools such as agent-based modelling and graph theoretical abstractions, to derive new metrics that holistically describe a network. The analysis phase completes the core functionality of the framework by linking our new metrics to the overall network performance. The tuning layer augments this core with algorithms that aim at automatically guiding networks toward desired conditions. In order to maximize the impact of our ideas, the proposed approach is rooted in relevant, near-future architectures and use cases in 5G networks, i.e., Internet of Things (IoT) and self-organizing cellular networks.
△ Less
Submitted 31 October, 2017;
originally announced October 2017.
-
Spectrum Pooling in MmWave Networks: Opportunities, Challenges, and Enablers
Authors:
Federico Boccardi,
Hossein Shokri-Ghadikolaei,
Gabor Fodor,
Elza Erkip,
Carlo Fischione,
Marios Kountouris,
Petar Popovski,
and Michele Zorzi
Abstract:
Motivated by the intrinsic characteristics of mmWave technologies, we discuss the possibility of an authorization regime that allows spectrum sharing between multiple operators, also referred to as spectrum pooling. In particular, considering user rate as the performance measure, we assess the benefit of coordination among the networks of different operators, study the impact of beamforming both a…
▽ More
Motivated by the intrinsic characteristics of mmWave technologies, we discuss the possibility of an authorization regime that allows spectrum sharing between multiple operators, also referred to as spectrum pooling. In particular, considering user rate as the performance measure, we assess the benefit of coordination among the networks of different operators, study the impact of beamforming both at the base stations and at the user terminals, and analyze the pooling performance at different frequency carriers. We also discuss the enabling spectrum mechanisms, architectures, and protocols required to make spectrum pooling work in real networks. Our initial results show that, from a technical perspective, spectrum pooling at mmWave has the potential for a more efficient spectrum use than a traditional exclusive spectrum allocation to a single operator. However, further studies are needed in order to reach a thorough understanding of this matter, and we hope that this paper will help stimulate further research in this area.
△ Less
Submitted 3 March, 2016;
originally announced March 2016.
-
Sparse plus low-rank autoregressive identification in neuroimaging time series
Authors:
Raphaël Liégeois,
Bamdev Mishra,
Mattia Zorzi,
Rodolphe Sepulchre
Abstract:
This paper considers the problem of identifying multivariate autoregressive (AR) sparse plus low-rank graphical models. Based on the corresponding problem formulation recently presented, we use the alternating direction method of multipliers (ADMM) to efficiently solve it and scale it to sizes encountered in neuroimaging applications. We apply this decomposition on synthetic and real neuroimaging…
▽ More
This paper considers the problem of identifying multivariate autoregressive (AR) sparse plus low-rank graphical models. Based on the corresponding problem formulation recently presented, we use the alternating direction method of multipliers (ADMM) to efficiently solve it and scale it to sizes encountered in neuroimaging applications. We apply this decomposition on synthetic and real neuroimaging datasets with a specific focus on the information encoded in the low-rank structure of our model. In particular, we illustrate that this information captures the spatio-temporal structure of the original data, generalizing classical component analysis approaches.
△ Less
Submitted 30 March, 2015;
originally announced March 2015.
-
A Contraction Analysis of the Convergence of Risk-Sensitive Filters
Authors:
Bernard C. Levy,
Mattia Zorzi
Abstract:
A contraction analysis of risk-sensitive Riccati equations is proposed. When the state-space model is reachable and observable, a block-update implementation of the risk-sensitive filter is used to show that the N-fold composition of the Riccati map is strictly contractive with respect to the Riemannian metric of positive definite matrices, when N is larger than the number of states. The range of…
▽ More
A contraction analysis of risk-sensitive Riccati equations is proposed. When the state-space model is reachable and observable, a block-update implementation of the risk-sensitive filter is used to show that the N-fold composition of the Riccati map is strictly contractive with respect to the Riemannian metric of positive definite matrices, when N is larger than the number of states. The range of values of the risk-sensitivity parameter for which the map remains contractive can be estimated a priori. It is also found that a second condition must be imposed on the risk-sensitivity parameter and on the initial error variance to ensure that the solution of the risk-sensitive Riccati equation remains positive definite at all times. The two conditions obtained can be viewed as extending to the multivariable case an earlier analysis of Whittle for the scalar case.
△ Less
Submitted 6 May, 2013;
originally announced May 2013.
-
Cognitive Access Policies under a Primary ARQ process via Forward-Backward Interference Cancellation
Authors:
Nicolò Michelusi,
Petar Popovski,
Osvaldo Simeone,
Marco Levorato,
Michele Zorzi
Abstract:
This paper introduces a novel technique for access by a cognitive Secondary User (SU) using best-effort transmission to a spectrum with an incumbent Primary User (PU), which uses Type-I Hybrid ARQ. The technique leverages the primary ARQ protocol to perform Interference Cancellation (IC) at the SU receiver (SUrx). Two IC mechanisms that work in concert are introduced: Forward IC, where SUrx, after…
▽ More
This paper introduces a novel technique for access by a cognitive Secondary User (SU) using best-effort transmission to a spectrum with an incumbent Primary User (PU), which uses Type-I Hybrid ARQ. The technique leverages the primary ARQ protocol to perform Interference Cancellation (IC) at the SU receiver (SUrx). Two IC mechanisms that work in concert are introduced: Forward IC, where SUrx, after decoding the PU message, cancels its interference in the (possible) following PU retransmissions of the same message, to improve the SU throughput; Backward IC, where SUrx performs IC on previous SU transmissions, whose decoding failed due to severe PU interference. Secondary access policies are designed that determine the secondary access probability in each state of the network so as to maximize the average long-term SU throughput by opportunistically leveraging IC, while causing bounded average long-term PU throughput degradation and SU power expenditure. It is proved that the optimal policy prescribes that the SU prioritizes its access in the states where SUrx knows the PU message, thus enabling IC. An algorithm is provided to optimally allocate additional secondary access opportunities in the states where the PU message is unknown. Numerical results are shown to assess the throughput gain provided by the proposed techniques.
△ Less
Submitted 30 January, 2013;
originally announced February 2013.