Showing 1–17 of 17 results for author: Zargari, S

Optimization of Rate-Splitting Multiple Access with Integrated Sensing and Backscatter Communication

Authors: Diluka Galappaththige, Shayan Zargari, Chintha Tellambura, Geoffrey Ye Li

Abstract: An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA sc… ▽ More An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA schemes, splits messages into common and private streams. With RSMA, the set of common rate forms can be optimized to reduce interference. Optimized formulas are thus derived for communication rates for users, tags, and the BS's sensing rate, with the primary goal of enhancing the transmission efficiency of the BS. The optimization task involves minimizing the BS's overall transmission power by jointly optimizing the BS's beamforming vectors, the tag reflection coefficients, and user common rates. The alternating optimization method is employed to address this challenge. Concrete solutions are provided for the received beamformers, and semi-definite relaxation and slack-optimization techniques are adopted for transmit beamformers and reflection coefficients, respectively. For example, the proposed RSMA-assisted ISABC system achieves a 350% communication rate boost over a nonorthogonal multiple access-assisted ISABC, with only a 24% increase in transmit power, leveraging ten transmit/reception antennas at the BS. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 13 pages, 8 figures, Journal paper

Deep Reinforcement Learning Based Resource Allocation for MIMO Bistatic Backscatter Networks

Authors: S. Zargari, D. Galappaththige, C. Tellambura

Abstract: Bistatic backscatter communication promises ubiquitous, massive connectivity by utilizing passive tags to connect with a reader by reflecting carrier emitter (CE) signals for future Internet-of-Things (IoT) networks. This study focuses on the joint design of the transmit/received beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is thus formu… ▽ More Bistatic backscatter communication promises ubiquitous, massive connectivity by utilizing passive tags to connect with a reader by reflecting carrier emitter (CE) signals for future Internet-of-Things (IoT) networks. This study focuses on the joint design of the transmit/received beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is thus formulated, subject to satisfying the tag requirements. We develop a joint design through a series of trial-and-error interactions within the environment, driven by a predefined reward system in a continuous state and action context. We propose two deep reinforcement learning (DRL) algorithms to address the underlying optimization problem, namely deep deterministic policy gradient (DDPG) and soft actor-critic (SAC). Simulation results indicate that the proposed algorithm can learn from the environment and incrementally enhance its behavior, achieving performance that is on par with two leading benchmarks. Further, we also compared the performance of the proposed method with deep Q-network (DQN), double deep Q-network (DDQN), and dueling DQN (DuelDQN). For a system with twelve antennas, SAC leads with a 26.76% gain over DQN, followed by alternative optimization (AO) and DDPG at 23.02% and 19.16%. DDQN and DuelDQN show smaller improvements of 10.40% and 14.36%, respectively, against DQN. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Submitted to an IEEE Transactions Journal

Transmit Power Optimization for Integrated Sensing and Backscatter Communication

Authors: S. Zargari, D. Galappaththige, C. Tellambura

Abstract: Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of d… ▽ More Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of detecting backscatter tags and communicating with the user, leveraging the same temporal and frequency resources. The tag-reflected BS signals offer data to the user and enable the BS to sense the environment simultaneously. We derive both user and tag communication rates and the sensing rate of the BS. We jointly optimize the transmit/received beamformers and tag reflection coefficients to minimize the total BS power. To solve this problem, we employ the alternating optimization technique. We offer a closed-form solution for the received beamformers while utilizing semi-definite relaxation and slack-optimization for transmit beamformers and power reflection coefficients, respectively. For example, with ten transmit/reception antennas at the BS, ISABC delivers a 75% sum communication and sensing rates gain over a traditional backscatter while requiring a 3.4% increase in transmit power. Furthermore, ISABC with active tags only requires a 0.24% increase in transmit power over conventional integrated sensing and communication. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: Submitted to an IEEE Transactions Journal

A Riemannian Manifold Approach to Constrained Resource Allocation in ISAC

Authors: Shayan Zargari, Diluka Galappaththige, Chintha Tellambura, Vincent Poor

Abstract: This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) trans… ▽ More This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) transmit power limits. ALMO applies the principles of Riemannian manifold optimization (MO) to navigate the complex, non-convex landscape of the resource allocation problem. It efficiently leverages the augmented Lagrangian method to ensure adherence to constraints. We present comprehensive numerical results to validate our framework, which illustrates the ALMO method's superior capability to enhance the dual functionalities of communication and sensing in ISAC systems. For instance, with 12 antennas and 30 dBm BS transmit power, our proposed ALMO algorithm delivers a 10.1% sum rate gain over a benchmark optimization-based algorithm. This work demonstrates significant improvements in system performance and contributes a new algorithmic perspective to ISAC resource management. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: 13 pages, 11 figures, submitted to an IEEE Transactions Journal

Sensing and Backscatter Communication Integration: Realizing Efficiency in Wireless Systems for IoT

Authors: Shayan Zargari, Diluka Galappaththige, Chintha Tellambura

Abstract: In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical devel… ▽ More In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical developments and principles of BackCom, we establish the foundational understanding crucial for integrating advanced sensing methodologies. Our study adopts a mixed-method approach, combining quantitative analyses of system performances with qualitative assessments of various integration techniques. Furthermore, these integrated systems showcase enhanced adaptability in dynamic environments, a pivotal attribute for future IoT applications. These findings hold profound implications for industries focusing on smart technologies, as they underscore the potential for achieving both sustainable and efficient communication. Our research distinguishes itself by not only highlighting the benefits but also addressing the challenges faced in this integration, providing a comprehensive overview of the topic. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 8 pages, 6 figures, Magazine

Signal Detection in Ambient Backscatter Systems: Fundamentals, Methods, and Trends

Authors: Shayan Zargari, Azar Hakimi, Fatemeh Rezaei, Chintha Tellambura, Amine Maaref

Abstract: Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the ra… ▽ More Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the radio frequency (RF) signals by themselves. Thus, these backscatter tags can be low-cost and battery-free. The RF signals can be ambient sources such as wireless-fidelity (Wi-Fi), cellular, or television (TV) signals, or the system can generate them externally. Backscatter channel characteristics are different from conventional point-to-point or cooperative relay channels. These systems are also affected by a strong interference link between the RF source and the tag besides the direct and backscattering links, making signal detection challenging. This paper provides an overview of the fundamentals, challenges, and ongoing research in signal detection for AmBC networks. It delves into various detection methods, discussing their advantages and drawbacks. The paper's emphasis on signal detection sets it apart and positions it as a valuable resource for IoT and wireless communication professionals and researchers. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: Accepted for publication in the IEEE Access

Enhancing AmBC Systems with Deep Learning for Joint Channel Estimation and Signal Detection

Authors: S. Zargari, A. Hakimi, C. Tellambura, A. Maaref

Abstract: The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channe… ▽ More The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channel and RF-source parameters. To address this challenge, we propose an innovative approach using a deep neural network (DNN) for channel state estimation (CSI) and signal detection within AmBC systems. Unlike traditional methods that separate CSI estimation and data detection, our approach leverages a DNN to implicitly estimate CSI and simultaneously detect data. The DNN model, trained offline using simulated data derived from channel statistics, excels in online data recovery, ensuring robust performance in practical scenarios. Comprehensive evaluations validate the superiority of our proposed DNN method over traditional detectors, particularly in terms of bit error rate (BER). In high signal-to-noise ratio (SNR) conditions, our method exhibits an impressive approximately 20% improvement in BER performance compared to the maximum likelihood (ML) approach. These results underscore the effectiveness of our developed approach for AmBC channel estimation and signal detection. In summary, our method outperforms traditional detectors, bolstering the reliability and efficiency of AmBC systems, even in challenging channel conditions. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Comments: Accepted for publication in the IEEE Transactions on Communications

Improved Energy-Based Signal Detection for Ambient Backscatter Communications

Authors: S. Zargari, C. Tellambura, A. Maaref

Abstract: In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint… ▽ More In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint correlation-energy detector (JCED) based on the first-order correlation of the received samples and (2) An improved energy detector (IED) based on the p-th norm of the received signal vector. We compare the performance of IED and TED under the generalized noise model using McLeish distribution and derive a general analytical formula for the area under the receiver operating characteristic (ROC) curves. Based on our results, both detectors outperform TED. For example, the probability of detection with a false alarm rate of 1\% for JCED and IED is 22.97\% and 5.41\% higher, respectively, compared to TED for a single-antenna reader. Using the direct interference cancellation (DIC) technique, these gains are 34.92\% and 3.7\%, respectively. With a four-antenna array at the reader and a 5\% false alarm rate, the JCED shows a significant BER improvement of 28.68\% without DIC and 48.21\% with DIC. △ Less

Submitted 12 June, 2024; v1 submitted 22 June, 2023; originally announced June 2023.

Comments: This paper has been accepted by IEEE TVT

User Scheduling and Trajectory Optimization for Energy-Efficient IRS-UAV Networks with SWIPT

Authors: S. Zargari, A. Hakimi, C. Tellambura, S. Herath

Abstract: This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests… ▽ More This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests energy with a non-linear energy harvesting circuit and reflects the incident signals by controlling its reflection coefficients and phase shifts. The trajectory of the UAV impacts the efficiency of these operations. We minimize the maximum energy consumption of all users by joint optimization of user scheduling, UAV trajectory/velocity, and IRS phase shifts/reflection coefficients while guaranteeing each user's minimum required data rate and harvested energy of the IRS. We first derive a closed-form solution for the IRS phase shifts and then address the non-convexity of the critical problem. Finally, we propose an alternating optimization (AO) algorithm to optimize the remaining variables iteratively. We demonstrate the gains over several benchmarks. For instance, with a 50-element IRS, min-max energy consumption can be as low as 0.0404 (Joule), a 7.13% improvement over the No IRS case (achieving 0.0435 (Joule)). We also show that IRS-UAV without EH performs best at the cost of circuit power consumption of the IRS (a 20% improvement over the No IRS case). △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: Accepted for publication in the IEEE Transactions on Vehicular Technology

IRS-Enabled Backscattering in a Downlink Non-Orthogonal Multiple Access System

Authors: Azar Hakimi, Shayan Zargari, Chintha Tellambura, Sanjeewa Herath

Abstract: Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest… ▽ More Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest primary user by jointly optimizing the IRS phase shifts, power splitting (PS) factor at the AP, and NOMA power coefficients while guaranteeing the quality of service (QoS) for both weak user and IRS data in the primary and secondary systems, respectively. The resulting optimization problem is non-convex. Thus, we split it into three parts and develop an alternating optimization (AO) algorithm. The advantage is that we derive closed-form solutions for the PS factor and NOMA power coefficients in the first two parts. In the third part, we optimize the phase shifts by exploiting semi-definite relaxation (SDR) and penalty techniques to handle the unit-modulus constraints. This algorithm achieves substantial gains (e.g., 40--68%) compared to relevant baseline schemes. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: Accepted for publication in the IEEE Communications Letters

Multiuser MISO PS-SWIPT Systems: Active or Passive RIS?

Authors: Shayan Zargari, Azar Hakimi, Chintha Tellambura, Sanjeewa Herath

Abstract: Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wire… ▽ More Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonlinear energy harvesting model. The goal is to minimize the base station (BS) transmit power by optimizing its beamformers, PS ratios, and RIS phase shifts/amplification factors. The simulation results show significant improvements (e.g., 19% and 28%) with the maximum reflect power of 10 mW and 15 mW, respectively, compared to the passive RIS without higher computational complexity cost. We also show the robustness of the proposed algorithm against imperfect channel state information. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: Accepted for publication in the IEEE Wireless Communications Letters

Energy-Efficient Hybrid Offloading for Backscatter-Assisted Wirelessly Powered MEC with Reconfigurable Intelligent Surfaces

Authors: S. Zargari, C. Tellambura, S. Herath

Abstract: We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optim… ▽ More We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optimize the time/power allocations, local computing frequencies, execution times, backscattering coefficients, and RIS phase shifts.} This goal results in a multi-objective optimization problem (MOOP) with conflicting objectives. Thus, we simultaneously maximize system throughput and minimize energy consumption via the Tchebycheff method, transforming into two single-objective optimization problems (SOOPs). For throughput maximization, we exploit alternating optimization (AO) to yield two sub-problems. For the first one, we derive closed-form resource allocations. For the second one, we design the RIS phase shifts via semi-definite relaxation, a difference of convex functions programming, majorization minimization techniques, and a penalty function for enforcing a rank-one solution. For energy minimization, we derive closed-form resource allocations. We demonstrate the gains over several benchmarks. For instance, with a $20$-element RIS, EE can be as high as 3 (Mbits/Joule), a 150\% improvement over the no-RIS case (achieving only 2 (Mbits/Joule)). △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: The final version of this paper was accepted by IEEE Transactions on Mobile Computing

Resource Management for Transmit Power Minimization in UAV-Assisted RIS HetNets Supported by Dual Connectivity

Authors: Ata Khalili, Ehsan Mohammadi Monfard, Shayan Zargari, Mohammad Reza. Javan, Nader Mokari, Eduard A. Jorswieck

Abstract: This paper proposes a novel approach to improve the performance of a heterogeneous network (HetNet) supported by dual connectivity (DC) by adopting multiple unmanned aerial vehicles (UAVs) as passive relays that carry reconfigurable intelligent surfaces (RISs). More specifically, RISs are deployed under the UAVs termed as UAVs-RISs that operate over the micro-wave ($μ$W) channel in the sky to sust… ▽ More This paper proposes a novel approach to improve the performance of a heterogeneous network (HetNet) supported by dual connectivity (DC) by adopting multiple unmanned aerial vehicles (UAVs) as passive relays that carry reconfigurable intelligent surfaces (RISs). More specifically, RISs are deployed under the UAVs termed as UAVs-RISs that operate over the micro-wave ($μ$W) channel in the sky to sustain a strong line-of-sight (LoS) connection with the ground users. The macro-cell operates over the $μ$W channel based on orthogonal multiple access (OMA), while small base stations (SBSs) operate over the millimeter-wave (mmW) channel based on non-orthogonal multiple access (NOMA). We study the problem of total transmit power minimization by jointly optimizing the trajectory/velocity of each UAV, RISs' phase shifts, subcarrier allocations, and active beamformers at each BS. The underlying problem is highly non-convex and the global optimal solution is intractable. To handle it, we decompose the original problem into two subproblems, i.e., a subproblem which deals with the UAVs' trajectories/velocities, RISs' phase shifts, and subcarrier allocations for $μ$W; and a subproblem for active beamforming design and subcarrier allocation for mmW. In particular, we solve the first subproblem via the dueling deep Q-Network (DQN) learning approach by develo** a distributed algorithm which leads to a better policy evaluation. Then, we solve the active beamforming design and subcarrier allocation for the mmW via the successive convex approximation (SCA) method. Simulation results exhibit the effectiveness of the proposed resource allocation scheme compared to other baseline schemes. In particular, it is revealed that by deploying UAVs-RISs, the transmit power can be reduced by 6 dBm while maintaining similar guaranteed QoS. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: This paper has got Major Revision by IEEE TWC

Max-Min Fair Energy-Efficient Beamforming Design for Intelligent Reflecting Surface-Aided SWIPT Systems with Non-linear Energy Harvesting Model

Authors: Shayan Zargari, Ata Khalili, Qingqing Wu, Mohammad Robat Mili, Derrick Wing Kwan Ng

Abstract: This paper considers an intelligent reflecting sur-face (IRS)-aided simultaneous wireless information and power transfer (SWIPT) network, where multiple users decode data and harvest energy from the transmitted signal of a transmit-ter. The proposed design framework exploits the cost-effective IRS to establish favorable communication environment to improve the fair energy efficient. In particular,… ▽ More This paper considers an intelligent reflecting sur-face (IRS)-aided simultaneous wireless information and power transfer (SWIPT) network, where multiple users decode data and harvest energy from the transmitted signal of a transmit-ter. The proposed design framework exploits the cost-effective IRS to establish favorable communication environment to improve the fair energy efficient. In particular, we study the max-min energy efficiency (EE) of the system by jointly designing the transmit information and energy beamforming at the base station (BS), phase shifts at the IRS, as well as the power splitting (PS) ratio at all users subject to the minimum rate, minimum harvested energy, and transmit power constraints. The formulated problem is non-convex and thus challenging to be solved. We propose two algorithms namely penalty-based and inner approximation (IA)-based to handle the non-convexity of the optimization problem. As such, we divide the original problem into two sub-problems and apply the alternating optimization (AO) algorithm for both proposed algorithms to handle it iteratively. In particular, in the penalty-based algorithm for the first sub-problem, the semi-definite relaxation (SDR) technique, difference of convex functions (DC) programming, majorization-minimization (MM) approach, and fractional programming theory are exploited to transform the non-convex optimization problem into a convex form that can be addressed efficiently. For the second sub-problem, a penalty-based approach is proposed to handle the optimization on the phase shifts introduced by the IRS with the proposed algorithms. For the IA-based method, we optimize jointly beamforming vectors and phase shifts while the PS ratio is solved optimally in the first sub-problem... △ Less

Submitted 22 March, 2021; originally announced March 2021.

Comments: Minor Revision by IEEE TVT

Multi-Objective Resource Allocation for IRS-Aided SWIPT

Authors: A. Khalili, S. Zargari, Q. Wu, D. W. K. Ng, R. Zhang

Abstract: In this letter, we study the resource allocation for a multiuser intelligent reflecting surface (IRS)-aided simultaneous wireless information and power transfer (SWIPT) system. Specifically, a multi-antenna base station (BS) transmits energy and information signals simultaneously to multiple energy harvesting receivers (EHRs) and information decoding receivers (IDRs) assisted by an IRS. Under this… ▽ More In this letter, we study the resource allocation for a multiuser intelligent reflecting surface (IRS)-aided simultaneous wireless information and power transfer (SWIPT) system. Specifically, a multi-antenna base station (BS) transmits energy and information signals simultaneously to multiple energy harvesting receivers (EHRs) and information decoding receivers (IDRs) assisted by an IRS. Under this setup, we introduce a multi-objective optimization (MOOP) framework to investigate the fundamental trade-off between the data sum-rate maximization and the total harvested energy maximization, by jointly optimizing the energy/information beamforming vectors at the BS and the phase shifts at the IRS. This MOOP problem is first converted to a single-objective optimization problem (SOOP) via the $ε$-constraint method and then solved by majorization minimization (MM) and inner approximation (IA) techniques. Simulation results unveil a non-trivial trade-off between the considered competing objectives, as well as the superior performance of the proposed scheme as compared to various baseline schemes. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Comments: Accepted by IEEE Wireless Communications Letters

Resource Allocation of Dual-Hop VLC/RF Systems with Light Energy Harvesting

Authors: Shayan Zargari, Mehrdad Kolivand, S. Alireza Nezamalhosseini, Bahman Abolhassani, Lawrence R. Chen, Mohammad Hossein Kahaei

Abstract: In this paper, we study the time allocation optimization problem to maximize the sum throughput in a dual-hop heterogeneous visible light communication (VLC)/radio frequency (RF) communication system. Two scenarios are investigated in this paper. For the first scenario, we consider an optical wireless powered communication network (WPCN) in which all users harvest energy from the received lightwav… ▽ More In this paper, we study the time allocation optimization problem to maximize the sum throughput in a dual-hop heterogeneous visible light communication (VLC)/radio frequency (RF) communication system. Two scenarios are investigated in this paper. For the first scenario, we consider an optical wireless powered communication network (WPCN) in which all users harvest energy from the received lightwave over downlink (DL), and then they use the harvested energy to transmit information signals in the uplink (UL) channels based on the time division multiple access (TDMA) scheme. The optimal time allocation in the UL is obtained to maximize the sum throughput of all users. For the second scenario, the time switching simultaneous lightwave information and power transfer (TS-SLIPT) based on the dual-hop VLC/RF is assumed that the LED transmits information and power simultaneously in the first hop DL (i.e., VLC link). The harvested energy at the relay is used to transmit information signals over the UL in the second hop (i.e., RF link). We propose a multi-objective optimization problem (MOOP) to study the trade-off between UL and DL sum-rate maximization. The non-convex MOOP framework is then transformed into an equivalent form, which yields a set of Pareto optimal resource allocation policies. We also illustrate the effectiveness of the proposed approaches through numerical results. △ Less

Submitted 15 November, 2020; originally announced November 2020.

Joint Design of Transmit Beamforming, IRS Platform, and Power Splitting SWIPT Receivers for Downlink Cellular Multiuser MISO

Authors: Shayan Zargari, Shahrokh Farahmand, Bahman Abolhassani

Abstract: A multiple antenna base station (BS) with an intelligent reflecting surface (IRS) platform, and several single antenna users are considered in the downlink mode. Simultaneous wireless information and power transfer (SWIPT) is utilized by the BS via transmit beamforming to convey information and power to all devices. Each device applies power splitting (PS) to dedicate separate parts of received po… ▽ More A multiple antenna base station (BS) with an intelligent reflecting surface (IRS) platform, and several single antenna users are considered in the downlink mode. Simultaneous wireless information and power transfer (SWIPT) is utilized by the BS via transmit beamforming to convey information and power to all devices. Each device applies power splitting (PS) to dedicate separate parts of received power to information decoding and energy harvesting. We formulate a total transmit power minimization problem to jointly design the BS beamforming vectors, IRS phase shifts, and PS ratios at the receivers subject to minimum rate and harvested energy quality of service (QoS) constraints at all the receivers. First, we develop a block coordinate descent algorithm, also known as alternating optimization that can decrease the objective function with every iteration with guaranteed convergence. Afterwards, two low-complexity sub-optimal algorithms that rely on well-known maximum ratio transmission and zero-forcing beamforming techniques are introduced. These algorithms are beneficial when the number of BS antennas and/or number of users are large, or coherence times of channels are small. Simulations corroborate the expectation that by deploying a passive IRS, BS power can be reduced by $10-20$ dBw while maintaining similar guaranteed QoS. Furthermore, even the proposed sub-optimal algorithms outperform the globally optimal SWIPT solution without IRS for a modest number of IRS elements. △ Less

Submitted 25 July, 2020; originally announced July 2020.

Journal ref: Physical Communications 2021