-
A time-to-digital converter with steady calibration through single-photon detection
Authors:
Matías Rubén Bolaños Wagner,
Daniele Vogrig,
Paolo Villoresi,
Giuseppe Vallone,
Andrea Stanco
Abstract:
Time-to-Digital Converters (TDCs) are a crucial tool in a wide array of fields, in particular for quantum communication, where time taggers performance can severely affect the quality of the entire application. Nowadays, FPGA-based TDCs present a viable alternative to ASIC ones, once the nonlinear behaviour due to the intrinsic nature of the device is properly mitigated. To compensate said nonline…
▽ More
Time-to-Digital Converters (TDCs) are a crucial tool in a wide array of fields, in particular for quantum communication, where time taggers performance can severely affect the quality of the entire application. Nowadays, FPGA-based TDCs present a viable alternative to ASIC ones, once the nonlinear behaviour due to the intrinsic nature of the device is properly mitigated. To compensate said nonlinearities, a calibration procedure is required, usually based on an interpolation methods. Here we present the design and the demonstration of a TDC that is FPGA-based and showing a residual jitter of 27 ps, that is scalable for multichannel operation. The application in Quantum Key Distribution (QKD) is discussed with a unique calibration method based on the exploitation of single-photon detection that does not require to stop the data acquisition or to use any interpolation methods, thus increasing accuracy and removing data loss. The calibration was tested in a relevant environment, investigating the device behaviour between 5°C and 80°C. Moreover, our design is capable of continuously streaming up to 12 Mevents/s for up to ~1 week without the TDC overflowing.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
A Probabilistic Approach to Power System State Estimation using a Linear Algorithm
Authors:
Martin R. Wagner,
Marko Jereminov,
Amritanshu Pandey,
Larry Pileggi
Abstract:
An equivalent circuit formulation for power system analysis was demonstrated to improve robustness of Power Flow and enable more generalized modeling, including that for RTUs (Remote Terminal Units) and PMUs (Phasor Measurement Units). These measurement device models, together with an adjoint circuit based optimization framework, enable an alternative formulation to Power System State Estimation (…
▽ More
An equivalent circuit formulation for power system analysis was demonstrated to improve robustness of Power Flow and enable more generalized modeling, including that for RTUs (Remote Terminal Units) and PMUs (Phasor Measurement Units). These measurement device models, together with an adjoint circuit based optimization framework, enable an alternative formulation to Power System State Estimation (SE) that can be solved within the equivalent circuit formulation. In this paper, we utilize a linear RTU model to create a fully linear SE algorithm that includes PMU and RTU measurements to enable a probabilistic approach to SE. Results demonstrate that this is a practical approach that is well suited for real-world applications.
△ Less
Submitted 1 May, 2019;
originally announced May 2019.
-
Robust Sequential Steady-State Analysis of Cascading Outages
Authors:
Amritanshu Pandey,
Aayushya Agarwal,
Marko Jereminov,
Martin R. Wagner,
David M. Bromberg,
Larry Pileggi
Abstract:
Simulating potential cascading failures can be useful for avoiding or mitigating such events. Currently, existing steady-state analysis tools are ill-suited for simulating cascading outages as they do not model frequency dependencies, they require good initial conditions to converge, and they are unable to distinguish between a collapsed grid state from a hard-to-solve test case. In this paper, we…
▽ More
Simulating potential cascading failures can be useful for avoiding or mitigating such events. Currently, existing steady-state analysis tools are ill-suited for simulating cascading outages as they do not model frequency dependencies, they require good initial conditions to converge, and they are unable to distinguish between a collapsed grid state from a hard-to-solve test case. In this paper, we extend a circuit-theoretic approach for simulating the steady-state of a power grid to incorporate frequency deviations and implicit models for underfrequency and undervoltage load shedding. Using these models, we introduce a framework capable of robustly solving cascading outages of large-scale systems that can also locate infeasible regions. We demonstrate the efficacy of our approach by simulating entire cascading outages on more than 8000 nodes sample testcase.
△ Less
Submitted 21 November, 2019; v1 submitted 24 April, 2019;
originally announced April 2019.
-
Equivalent Circuit Programming for Estimating the State of a Power System
Authors:
Marko Jereminov,
Aleksandar Jovicic,
Martin R. Wagner,
Gabriela Hug,
Larry Pileggi
Abstract:
An Equivalent Circuit Programming (ECP) approach that expresses the optimality conditions of an optimization problem in terms of an equivalent circuit model and uses circuit simulation techniques to solve for an optimal solution, is applied to the state estimation problem for power systems. The benefits of using an equivalent circuit formulation for incorporating both Phasor Measurement Units (PMU…
▽ More
An Equivalent Circuit Programming (ECP) approach that expresses the optimality conditions of an optimization problem in terms of an equivalent circuit model and uses circuit simulation techniques to solve for an optimal solution, is applied to the state estimation problem for power systems. The benefits of using an equivalent circuit formulation for incorporating both Phasor Measurement Units (PMU) and Remote Terminal Units (RTU), as well as for reducing the nonlinearities of the state estimation problem was previously demonstrated. In this paper we further exploit the circuit nature of the state estimation problem to formulate not only the model but also the optimality conditions as an ECP problem. The efficiency and accuracy of our approach are demonstrated by estimating the states of large-scale power grids (80k+ buses).
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Linear Power Grid State Estimation with Modeling Uncertainties
Authors:
Martin R. Wagner,
Marko Jereminov,
Larry Pileggi
Abstract:
Recent advances in power system State Estimation (SE) have included equivalent circuit models for representing measurement data that allows incorporation of both PMU and RTU measurements within the state estimator. In this paper, we introduce a probabilistic framework with a new RTU model that renders the complete SE problem linear while not affecting its accuracy. It is demonstrated that the prob…
▽ More
Recent advances in power system State Estimation (SE) have included equivalent circuit models for representing measurement data that allows incorporation of both PMU and RTU measurements within the state estimator. In this paper, we introduce a probabilistic framework with a new RTU model that renders the complete SE problem linear while not affecting its accuracy. It is demonstrated that the probabilistic state of a system can be efficiently and accurately estimated not only with the uncertainties from the measurement data, but also while including variations from transmission network models. To demonstrate accuracy and scalability we present probabilistic state estimation results for the 82k test case that represents the transmission level grid of the entire USA. It is shown that the estimated state distributions include the true grid state, while their mean exactly corresponds to the estimated deterministic state obtained from the nonlinear state estimator.
△ Less
Submitted 12 December, 2018;
originally announced December 2018.
-
Evaluating Feasibility within Power Flow
Authors:
Marko Jereminov,
David M. Bromberg,
Amritanshu Pandey,
Martin R. Wagner,
Larry Pileggi
Abstract:
Recent development of techniques that improve the convergence properties of power flow simulation have been demonstrated to facilitate scaling to large system sizes (80k+ buses). However, the problem remains to reliably identify cases that are infeasible, system configurations that have no solution. In this paper, we use the circuit theoretic approach based on adjoint networks to evaluate the feas…
▽ More
Recent development of techniques that improve the convergence properties of power flow simulation have been demonstrated to facilitate scaling to large system sizes (80k+ buses). However, the problem remains to reliably identify cases that are infeasible, system configurations that have no solution. In this paper, we use the circuit theoretic approach based on adjoint networks to evaluate the feasibility of a power flow test case and further locate and quantify the source of infeasibility in the cases operating beyond the tip of the nose curve. By creating infeasibility current source models that are added to each node of the system model and further coupling each source to its corresponding node of the adjoint network, any locations of insufficient real or reactive power are captured by a non-zero response of the adjoint network. Furthermore, it is shown that the proposed joint simulation of power flow and its adjoint network models provide the optimally minimized currents that can be later utilized to inform corrective actions to restore the feasibility of power flow problems.
△ Less
Submitted 7 December, 2019; v1 submitted 5 September, 2018;
originally announced September 2018.
-
Robust Probabilistic Analysis of Transmission Power Systems based on Equivalent Circuit Formulation
Authors:
Martin R. Wagner,
Amritanshu Pandey,
Marko Jereminov,
Larry Pileggi
Abstract:
Recent advances in steady-state analysis of power systems have introduced the equivalent split-circuit approach and corresponding continuation methods that can reliably find the correct physical solution of large-scale power system problems. The improvement in robustness provided by these developments are the basis for improvements in other fields of power system research. Probabilistic Power Flow…
▽ More
Recent advances in steady-state analysis of power systems have introduced the equivalent split-circuit approach and corresponding continuation methods that can reliably find the correct physical solution of large-scale power system problems. The improvement in robustness provided by these developments are the basis for improvements in other fields of power system research. Probabilistic Power Flow studies are one of the areas of impact. This paper will describe a Simple Random Sampling Monte Carlo approach for probabilistic contingency analyses of transmission line power systems. The results are compared with those from Monte Carlo simulations using a standard power flow tool. Lastly, probabilistic contingency studies on two publicly available power system cases are presented.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Robust Power Flow and Three-Phase Power Flow Analyses
Authors:
Amritanshu Pandey,
Marko Jereminov,
Martin R. Wagner,
David M. Bromberg,
Gabriela Hug,
Larry Pileggi
Abstract:
Robust simulation is essential for reliable operation and planning of transmission and distribution power grids. At present, disparate methods exist for steady-state analysis of the transmission (power flow) and distribution power grid (three-phase power flow). Due to the non-linear nature of the problem, it is difficult for alternating current (AC) power flow and three-phase power flow analyses t…
▽ More
Robust simulation is essential for reliable operation and planning of transmission and distribution power grids. At present, disparate methods exist for steady-state analysis of the transmission (power flow) and distribution power grid (three-phase power flow). Due to the non-linear nature of the problem, it is difficult for alternating current (AC) power flow and three-phase power flow analyses to ensure convergence to the correct physical solution, particularly from arbitrary initial conditions, or when evaluating a change (e.g. contingency) in the grid. In this paper, we describe our equivalent circuit formulation approach with current and voltage variables that models both the positive sequence network of the transmission grid and three-phase network of the distribution grid without loss of generality. The proposed circuit models and formalism enable the extension and application of circuit simulation techniques to solve for the steady-state solution with excellent robustness of convergence. Examples for positive sequence transmission and three-phase distribution systems, including actual 75k+ nodes Eastern Interconnection transmission test cases and 8k+ nodes taxonomy distribution test cases, are solved from arbitrary initial guesses to demonstrate the efficacy of our approach.
△ Less
Submitted 8 August, 2018; v1 submitted 3 March, 2018;
originally announced March 2018.
-
Robust Convergence of Power Flow using Tx Step** Method with Equivalent Circuit Formulation
Authors:
Amritanshu Pandey,
Marko Jereminov,
Martin R. Wagner,
Gabriela Hug,
Larry Pileggi
Abstract:
Robust solving of critical large power flow cases (with 50k or greater buses) forms the backbone of planning and operation of any large connected power grid. At present, reliable convergence with applications of existing power flow tools to large power systems is contingent upon a good initial guess for the system state. To enable robust convergence for large scale systems starting with an arbitra…
▽ More
Robust solving of critical large power flow cases (with 50k or greater buses) forms the backbone of planning and operation of any large connected power grid. At present, reliable convergence with applications of existing power flow tools to large power systems is contingent upon a good initial guess for the system state. To enable robust convergence for large scale systems starting with an arbitrary initial guess, we extend our equivalent circuit formulation for power flow analysis to include a novel continuation method based on transmission line (Tx) step**. While various continuation methods have been proposed for use with the traditional PQV power flow formulation, these methods have either failed to completely solve the problem or have resulted in convergence to a low voltage solution. The proposed Tx Step** method in this paper demonstrates robust convergence to the high voltage solution from an arbitrary initial guess. Example systems, including 75k+ bus test cases representing different loading and operating conditions for Eastern Interconnection of the U.S. power grid, are solved from arbitrary initial guesses.Interconnection of the U.S. power grid, are solved from arbitrary initial guesses.
△ Less
Submitted 4 November, 2017;
originally announced November 2017.
