-
Time-Domain Channel Estimation for Extremely Large MIMO THz Communications with Beam Squint
Authors:
Evangelos Vlachos,
Aryan Kaushik,
Yonina C. Eldar,
George C. Alexandropoulos
Abstract:
In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the Terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures, which leads to frequency selectivity, a problem known as beam squint. Multi-carrier transmission schemes which are usually deployed to address this problem, suffe…
▽ More
In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the Terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures, which leads to frequency selectivity, a problem known as beam squint. Multi-carrier transmission schemes which are usually deployed to address this problem, suffer from high peak-to-average power ratio, which is specifically dominant in THz communications where low transmit power is realized. Diverging from the usual approach, we devise a novel channel estimation problem formulation in the time domain for single-carrier (SC) modulation, which favors transmissions in THz, and incorporate the beam-squint effect in a sparse vector recovery problem that is solved via sparse optimization tools. In particular, the beam squint and the sparse MIMO channel are jointly tracked by using an alternating minimization approach that decomposes the two estimation problems. The presented performance evaluation results validate that the proposed SC technique exhibits superior performance than the conventional one as well as than state-of-the-art multi-carrier approaches.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Millimeter Wave Channel Estimation for Lens based Hybrid MIMO with Low Resolution ADCs
Authors:
Evangelos Vlachos,
Aryan Kaushik,
Muhammad Z. Shakir
Abstract:
The high path loss associated with millimeter wave (mmWave) frequency communication can be compensated by large scale antenna arrays such as multiple-input multiple-output (MIMO) systems. The hybrid beamforming architecture which uses fewer radio frequency chains is implemented to reduce power consumption and hardware complexity, while still supporting multi-stream communication. We propose an eff…
▽ More
The high path loss associated with millimeter wave (mmWave) frequency communication can be compensated by large scale antenna arrays such as multiple-input multiple-output (MIMO) systems. The hybrid beamforming architecture which uses fewer radio frequency chains is implemented to reduce power consumption and hardware complexity, while still supporting multi-stream communication. We propose an efficient expectation-maximization (EM)-based mmWave channel estimator for a lens-based hybrid MIMO system with low resolution sampling at the receiver. The lens-based beamformer is investigated to provide increased antenna gain and reduced implementation complexity as the conventional beam selection network is excluded. Low resolution sampling at the analog-to-digital converters is implemented for reduced power consumption. The proposed solution with a robust maximum a posteriori estimator based on the EM algorithm performs better than the conventional EM approach and minimum mean square error baselines in medium to high signal-to-noise ratio regions.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Flexible Hybrid Beamforming for Spectrally Efficient 6G Joint Radar-Communications
Authors:
Aryan Kaushik,
Evangelos Vlachos,
Muhammad Z. Shakir,
Wonjae Shin,
Rongke Liu
Abstract:
Joint radar-communications (JRC) benefits from multi-functionality of radar and communication operations using same hardware and radio frequency (RF) spectrum resources. Thus JRC systems possess very high potential to be employed into the sixth generation (6G) standards. This paper designs a flexible beamformer for multiple-input multiple output (MIMO) JRC with maximized spectral efficiency (SE).…
▽ More
Joint radar-communications (JRC) benefits from multi-functionality of radar and communication operations using same hardware and radio frequency (RF) spectrum resources. Thus JRC systems possess very high potential to be employed into the sixth generation (6G) standards. This paper designs a flexible beamformer for multiple-input multiple output (MIMO) JRC with maximized spectral efficiency (SE). Hybrid beamforming is implemented which constitutes lesser number of RF chains than number of transmitter antennas. We jointly express JRC rate with communication and radar entities including a weighting factor which depicts the dominance of one operation over the other. The joint-SE based proposed method optimally selects the number of RF chains with flexible hynrid beamforming design. Furthermore, when the communication operation takes place the proposed method takes into account the interference occurring from the radar operation and vice-versa. Fractional programming based selection procedure is used for flexible beamforming and optimal number of RF chains while considering interference of each operation. Simulation results are presented and compared with different baselines to show effectiveness of the proposed flexible hybrid beamforming method.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Covariance-Based Hybrid Beamforming for Spectrally Efficient Joint Radar-Communications
Authors:
Evangelos Vlachos,
Aryan Kaushik
Abstract:
Joint radar-communications (JRC) is considered to be a vital technology in deploying the next generation systems, since its useful in decongestion of the radio frequency (RF) spectrum and utilising the same hardware resources for dual functions. Using JRC systems for dual function generates interference between both the operations which needs to be addressed in future standardization. Furthermore,…
▽ More
Joint radar-communications (JRC) is considered to be a vital technology in deploying the next generation systems, since its useful in decongestion of the radio frequency (RF) spectrum and utilising the same hardware resources for dual functions. Using JRC systems for dual function generates interference between both the operations which needs to be addressed in future standardization. Furthermore, JRC systems can be advanced by deploying hybrid beamforming which implements fewer number of RF chains than the number of transmit antennas. This paper designs a robust hybrid beamformer for minimizing the interference of a JRC transmitter via RF chain selection resulting into mutual information maximization. We consider a weighted mutual information for the dual function JRC system and implement a common analog beamformer for both the operations. The mutual information maximization problem is formulated which is non-convex and difficult to solve. The problem is simplified to convex form and solved using Dinkelbach approximation abased fractional programming. The performance of the optimal RF selection based proposed approach is evaluated, compared with baselines and its effectiveness is inferred via numerical results.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Energy Efficiency Maximization in Millimeter Wave Hybrid MIMO Systems for 5G and Beyond
Authors:
Aryan Kaushik,
John Thompson,
Evangelos Vlachos
Abstract:
At millimeter wave (mmWave) frequencies, the higher cost and power consumption of hardware components in multiple-input multiple output (MIMO) systems do not allow beamforming entirely at the baseband with a separate radio frequency (RF) chain for each antenna. In such scenarios, to enable spatial multiplexing, hybrid beamforming, which uses phase shifters to connect a fewer number of RF chains to…
▽ More
At millimeter wave (mmWave) frequencies, the higher cost and power consumption of hardware components in multiple-input multiple output (MIMO) systems do not allow beamforming entirely at the baseband with a separate radio frequency (RF) chain for each antenna. In such scenarios, to enable spatial multiplexing, hybrid beamforming, which uses phase shifters to connect a fewer number of RF chains to a large number of antennas is a cost effective and energy-saving alternative. This paper describes our research on fully adaptive transceivers that adapt their behaviour on a frame-by-frame basis, so that a mmWave hybrid MIMO system always operates in the most energy efficient manner. Exhaustive search based brute force approach is computationally intensive, so we study fractional programming as a low-cost alternative to solve the problem which maximizes energy efficiency. The performance results indicate that the resulting mmWave hybrid MIMO transceiver achieves significantly improved energy efficiency results compared to the baseline cases involving analogue-only or digital-only signal processing solutions, and shows performance trade-offs with the brute force approach.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
A Hardware Architecture for Reconfigurable Intelligent Surfaces with Minimal Active Elements for Explicit Channel Estimation
Authors:
George C. Alexandropoulos,
Evangelos Vlachos
Abstract:
Intelligent surfaces comprising of cost effective, nearly passive, and reconfigurable unit elements are lately gaining increasing interest due to their potential in enabling fully programmable wireless environments. They are envisioned to offer environmental intelligence for diverse communication objectives, when coated on various objects of the deployment area of interest. To achieve this overarc…
▽ More
Intelligent surfaces comprising of cost effective, nearly passive, and reconfigurable unit elements are lately gaining increasing interest due to their potential in enabling fully programmable wireless environments. They are envisioned to offer environmental intelligence for diverse communication objectives, when coated on various objects of the deployment area of interest. To achieve this overarching goal, the channels where the Reconfigurable Intelligent Surfaces (RISs) are involved need to be in principle estimated. However, this is a challenging task with the currently available hardware RIS architectures requiring lengthy training periods among the network nodes utilizing RIS-assisted wireless communication. In this paper, we present a novel RIS architecture comprising of any number of passive reflecting elements, a simple controller for their adjustable configuration, and a single Radio Frequency (RF) chain for baseband measurements. Capitalizing on this architecture and assuming sparse wireless channels in the beamspace domain, we present an alternating optimization approach for explicit estimation of the channel gains at the RIS elements attached to the single RF chain. Representative simulation results demonstrate the channel estimation accuracy and achievable end-to-end performance for various training lengths and numbers of reflecting unit elements.
△ Less
Submitted 25 May, 2022; v1 submitted 24 February, 2020;
originally announced February 2020.
-
Joint Bit Allocation and Hybrid Beamforming Optimization for Energy Efficient Millimeter Wave MIMO Systems
Authors:
Aryan Kaushik,
Evangelos Vlachos,
Christos Tsinos,
John Thompson,
Symeon Chatzinotas
Abstract:
In this paper, we aim to design highly energy efficient end-to-end communication for millimeter wave multiple-input multiple-output systems. This is done by jointly optimizing the digital-to-analog converter (DAC)/analog-to-digital converter (ADC) bit resolutions and hybrid beamforming matrices. The novel decomposition of the hybrid precoder and the hybrid combiner to three parts is introduced at…
▽ More
In this paper, we aim to design highly energy efficient end-to-end communication for millimeter wave multiple-input multiple-output systems. This is done by jointly optimizing the digital-to-analog converter (DAC)/analog-to-digital converter (ADC) bit resolutions and hybrid beamforming matrices. The novel decomposition of the hybrid precoder and the hybrid combiner to three parts is introduced at the transmitter (TX) and the receiver (RX), respectively, representing the analog precoder/combiner matrix, the DAC/ADC bit resolution matrix and the baseband precoder/combiner matrix. The unknown matrices are computed as a solution to the matrix factorization problem where the optimal fully digital precoder or combiner is approximated by the product of these matrices. A novel and efficient solution based on the alternating direction method of multipliers is proposed to solve these problems at both the TX and the RX. The simulation results show that the proposed solution, where the DAC/ADC bit allocation is dynamic during operation, achieves higher energy efficiency when compared with existing benchmark techniques that use fixed DAC/ADC bit resolutions.
△ Less
Submitted 10 March, 2020; v1 submitted 1 October, 2019;
originally announced October 2019.
-
Energy Efficient ADC Bit Allocation and Hybrid Combining for Millimeter Wave MIMO Systems
Authors:
Aryan Kaushik,
Christos Tsinos,
Evangelos Vlachos,
John Thompson
Abstract:
Low resolution analog-to-digital converters (ADCs) can be employed to improve the energy efficiency (EE) of a wireless receiver since the power consumption of each ADC is exponentially related to its sampling resolution and the hardware complexity. In this paper, we aim to jointly optimize the sampling resolution, i.e., the number of ADC bits, and analog/digital hybrid combiner matrices which prov…
▽ More
Low resolution analog-to-digital converters (ADCs) can be employed to improve the energy efficiency (EE) of a wireless receiver since the power consumption of each ADC is exponentially related to its sampling resolution and the hardware complexity. In this paper, we aim to jointly optimize the sampling resolution, i.e., the number of ADC bits, and analog/digital hybrid combiner matrices which provides highly energy efficient solutions for millimeter wave multiple-input multiple output systems. A novel decomposition of the hybrid combiner to three parts is introduced: the analog combiner matrix, the bit resolution matrix and the baseband combiner matrix. The unknown matrices are computed as the solution to a matrix factorization problem where the optimal, fully digital combiner is approximated by the product of these matrices. An efficient solution based on the alternating direction method of multipliers is proposed to solve this problem. The simulation results show that the proposed solution achieves high EE performance when compared with existing benchmark techniques that use fixed ADC resolutions.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
