-
Multicarrier ISAC: Advances in Waveform Design, Signal Processing and Learning under Non-Idealities
Authors:
Visa Koivunen,
Musa Furkan Keskin,
Henk Wymeersch,
Mikko Valkama,
Nuria González-Prelcic
Abstract:
This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna re…
▽ More
This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna resources. Focusing on multicarrier (MC) systems, which represent the most widely used communication waveforms, it explores the co-design and optimization of waveforms alongside multiantenna transceiver signal processing for communications and both monostatic and bistatic sensing applications of ISAC. Moreover, techniques of high practical relevance for overcoming and even harnessing challenges posed by non-idealities in actual transceiver implementations are considered. To operate in highly dynamic radio environments and target scenarios, both model-based structured optimization and learning-based methodologies for ISAC systems are covered, assessing their adaptability and learning capabilities under real-world conditions. The paper presents trade-offs in communication-centric and radar-sensing-centric approaches, aiming for an optimized balance in densely used spectrum.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Robust NLoS Localization in 5G mmWave Networks: Data-based Methods and Performance
Authors:
Roman Klus,
Jukka Talvitie,
Julia Vinogradova,
Gabor Fodor,
Johan Torsner,
Mikko Valkama
Abstract:
Ensuring smooth mobility management while employing directional beamformed transmissions in 5G millimeter-wave networks calls for robust and accurate user equipment (UE) localization and tracking. In this article, we develop neural network-based positioning models with time- and frequency-domain channel state information (CSI) data in harsh non-line-of-sight (NLoS) conditions. We propose a novel f…
▽ More
Ensuring smooth mobility management while employing directional beamformed transmissions in 5G millimeter-wave networks calls for robust and accurate user equipment (UE) localization and tracking. In this article, we develop neural network-based positioning models with time- and frequency-domain channel state information (CSI) data in harsh non-line-of-sight (NLoS) conditions. We propose a novel frequency-domain feature extraction, which combines relative phase differences and received powers across resource blocks, and offers robust performance and reliability. Additionally, we exploit the multipath components and propose an aggregate time-domain feature combining time-of-flight, angle-of-arrival and received path-wise powers. Importantly, the temporal correlations are also harnessed in the form of sequence processing neural networks, which prove to be of particular benefit for vehicular UEs. Realistic numerical evaluations in large-scale line-of-sight (LoS)-obstructed urban environment with moving vehicles are provided, building on full ray-tracing based propagation modeling. The results show the robustness of the proposed CSI features in terms of positioning accuracy, and that the proposed models reliably localize UEs even in the absence of a LoS path, clearly outperforming the state-of-the-art with similar or even reduced processing complexity. The proposed sequence-based neural network model is capable of tracking the UE position, speed and heading simultaneously despite the strong uncertainties in the CSI measurements. Finally, it is shown that differences between the training and online inference environments can be efficiently addressed and alleviated through transfer learning.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Integrated Monostatic Sensing and Full-Duplex Multiuser Communication for mmWave Systems
Authors:
Murat Bayraktar,
Nuria González-Prelcic,
Mikko Valkama,
Hao Chen,
Charlie Jianzhong Zhang
Abstract:
In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation…
▽ More
In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation of self-interference (SI) caused by simultaneous transmission and reception at the FD base station (BS). Additionally, MU interference needs to be handled by the precoder/combiner design. The resulting optimization problem involves non-convex constraints since hybrid analog/digital architectures utilize networks of phase shifters. To solve the proposed problem, we separate the optimization of each precoder/combiner, and design each one of them while fixing the others. The precoders at the FD BS are designed by reformulating the communication and sensing constraints as signal-to-leakage-plus-noise ratio (SLNR) maximization problems that consider SI and MU interference as leakage. Furthermore, we design the frequency-flat analog combiner such that the residual SI at the FD BS is minimized under communication and sensing gain constraints. Finally, we design an interference-aware digital combining stage that separates MU signals and target reflections. The communication performance and sensing results show that the proposed framework efficiently supports both functionalities simultaneously.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
The Integrated Sensing and Communication Revolution for 6G: Vision, Techniques, and Applications
Authors:
Nuria González-Prelcic,
Musa Furkan Keskin,
Ossi Kaltiokallio,
Mikko Valkama,
Davide Dardari,
Xiao Shen,
Yuan Shen,
Murat Bayraktar,
Henk Wymeersch
Abstract:
Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that har…
▽ More
Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that harnesses all these sensing data can not only enable additional sensing services, but also become more resilient to channel-dependent effects like blockage and better support adaptation in dynamic environments as networks reconfigure. In this paper, we provide a vision for integrated sensing and communication (ISAC) networks and an overview of how signal processing, optimization and machine learning techniques can be leveraged to make them a reality in the context of 6G. We also include some examples of the performance of several of these strategies when evaluated using a simulation framework based on a combination of ray tracing measurements and mathematical models that mix the digital and physical worlds.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Enhancing Physical Layer Security with Deep SIMO Auto-Encoder and RF Impairments Modeling
Authors:
Abdullahi Mohammad,
Mahmoud Tukur Kabir,
Mikko Valkama,
Bo Tan
Abstract:
This paper presents a novel approach to achieving secure wireless communication by leveraging the inherent characteristics of wireless channels through end-to-end learning using a single-input-multiple-output (SIMO) autoencoder (AE). To ensure a more realistic signal transmission, we derive the signal model that captures all radio frequency (RF) hardware impairments to provide reliable and secure…
▽ More
This paper presents a novel approach to achieving secure wireless communication by leveraging the inherent characteristics of wireless channels through end-to-end learning using a single-input-multiple-output (SIMO) autoencoder (AE). To ensure a more realistic signal transmission, we derive the signal model that captures all radio frequency (RF) hardware impairments to provide reliable and secure communication. Performance evaluations against traditional linear decoders, such as zero-forcing (ZR) and linear minimum mean square error (LMMSE), and the optimal nonlinear decoder, maximum likelihood (ML), demonstrate that the AE-based SIMO model exhibits superior bit error rate (BER) performance, but with a substantial gap even in the presence of RF hardware impairments. Additionally, the proposed model offers enhanced security features, preventing potential eavesdroppers from intercepting transmitted information and leveraging RF impairments for augmented physical layer security and device identification. These findings underscore the efficacy of the proposed end-to-end learning approach in achieving secure and robust wireless communication.
△ Less
Submitted 15 May, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Robust Snapshot Radio SLAM
Authors:
Ossi Kaltiokallio,
Elizaveta Rastorgueva-Foi,
Jukka Talvitie,
Yu Ge,
Henk Wymeersch,
Mikko Valkama
Abstract:
The intrinsic geometric connections between millimeter-wave (mmWave) signals and the propagation environment can be leveraged for simultaneous localization and map** (SLAM) in 5G and beyond networks. However, estimated channel parameters that are mismatched to the utilized geometric model can cause the SLAM solution to degrade. In this paper, we propose a robust snapshot radio SLAM algorithm for…
▽ More
The intrinsic geometric connections between millimeter-wave (mmWave) signals and the propagation environment can be leveraged for simultaneous localization and map** (SLAM) in 5G and beyond networks. However, estimated channel parameters that are mismatched to the utilized geometric model can cause the SLAM solution to degrade. In this paper, we propose a robust snapshot radio SLAM algorithm for mixed line-of-sight (LoS) and non-line-of-sight (NLoS) environments that can estimate the unknown user equipment (UE) state, map of the environment as well as the presence of the LoS path. The proposed method can accurately detect outliers and the LoS path, enabling robust estimation in both LoS and NLoS conditions. The proposed method is validated using 60 GHz experimental data, indicating superior performance compared to the state-of-the-art.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Time vs. Frequency Domain DPD for Massive MIMO: Methods and Performance Analysis
Authors:
Yibo Wu,
Ulf Gustavsson,
Mikko Valkama,
Alexandre Graell i Amat,
Henk Wymeersch
Abstract:
The use of up to hundreds of antennas in massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) poses a complexity challenge for digital predistortion (DPD) aiming to linearize the nonlinear power amplifiers (PAs). While the complexity for conventional time domain (TD) DPD scales with the number of PAs, frequency domain (FD) DPD has a comple…
▽ More
The use of up to hundreds of antennas in massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) poses a complexity challenge for digital predistortion (DPD) aiming to linearize the nonlinear power amplifiers (PAs). While the complexity for conventional time domain (TD) DPD scales with the number of PAs, frequency domain (FD) DPD has a complexity scaling with the number of user equipments (UEs). In this work, we provide a comprehensive analysis of different state-of-the-art TD and FD-DPD schemes in terms of complexity and linearization performance in both rich scattering and line-of-sight (LOS) channels. We also propose a novel low-complexity FD convolutional neural network (CNN) DPD. The analysis shows that FD-DPD, particularly the proposed FD CNN, is preferable in LOS scenarios with few users, due to the favorable trade-off between complexity and linearization performance. On the other hand, in scenarios with more users or isotropic scattering channels, significant intermodulation distortions among UEs degrade FD-DPD performance, making TD-DPD more suitable.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Millimeter-wave Radio SLAM: End-to-End Processing Methods and Experimental Validation
Authors:
Elizaveta Rastorgueva-Foi,
Ossi Kaltiokallio,
Yu Ge,
Matias Turunen,
Jukka Talvitie,
Bo Tan,
Musa Furkan Keskin,
Henk Wymeersch,
Mikko Valkama
Abstract:
In this article, we address the timely topic of cellular bistatic simultaneous localization and map** (SLAM) with specific focus on end-to-end processing solutions, from raw I/Q samples, via channel parameter estimation to user equipment (UE) and landmark location information in millimeter-wave (mmWave) networks, with minimal prior knowledge. Firstly, we propose a new multipath channel parameter…
▽ More
In this article, we address the timely topic of cellular bistatic simultaneous localization and map** (SLAM) with specific focus on end-to-end processing solutions, from raw I/Q samples, via channel parameter estimation to user equipment (UE) and landmark location information in millimeter-wave (mmWave) networks, with minimal prior knowledge. Firstly, we propose a new multipath channel parameter estimation solution that operates directly with beam reference signal received power (BRSRP) measurements, alleviating the need to know the true antenna beam-patterns or the underlying beamforming weights. Additionally, the method has built-in robustness against unavoidable antenna sidelobes. Secondly, we propose new snapshot SLAM algorithms that have increased robustness and identifiability compared to prior art, in practical built environments with complex clutter and multi-bounce propagation scenarios, and do not rely on any a priori motion model. The performance of the proposed methods is assessed at the 60 GHz mmWave band, via both realistic ray-tracing evaluations as well as true experimental measurements, in an indoor environment. A wide set of offered results demonstrate the improved performance, compared to the relevant prior art, in terms of the channel parameter estimation as well as the end-to-end SLAM performance. Finally, the article provides the measured 60 GHz data openly available for the research community, facilitating results reproducibility as well as further algorithm development.
△ Less
Submitted 20 May, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
JrCUP: Joint RIS Calibration and User Positioning for 6G Wireless Systems
Authors:
Pinjun Zheng,
Hui Chen,
Tarig Ballal,
Mikko Valkama,
Henk Wymeersch,
Tareq Y. Al-Naffouri
Abstract:
Reconfigurable intelligent surface (RIS)-assisted localization has attracted extensive attention as it can enable and enhance localization services in extreme scenarios. However, most existing works treat RISs as anchors with known positions and orientations, which is not realistic in applications with mobile or uncalibrated RISs. This work considers the joint RIS calibration and user positioning…
▽ More
Reconfigurable intelligent surface (RIS)-assisted localization has attracted extensive attention as it can enable and enhance localization services in extreme scenarios. However, most existing works treat RISs as anchors with known positions and orientations, which is not realistic in applications with mobile or uncalibrated RISs. This work considers the joint RIS calibration and user positioning (JrCUP) problem with an active RIS. We propose a novel two-stage method to solve the considered JrCUP problem. The first stage comprises a tensor-estimation of signal parameters via rotational invariance techniques (tensorESPRIT), followed by a channel parameters refinement using least-squares. In the second stage, a two-dimensional search algorithm is proposed to estimate the three-dimensional user and RIS positions, one-dimensional RIS orientation, and clock bias from the estimated channel parameters. The Cramer-Rao lower bounds of the channel parameters and localization parameters are derived to verify the effectiveness of the proposed tensorESPRIT-based algorithms. In addition, simulation results reveal that the active RIS can significantly improve the localization performance compared to the passive case under the same system power supply in practical regions. Moreover, we observe the presence of blind areas with limited JrCUP localization performance, which can be mitigated by either leveraging more prior information or deploying extra base stations.
△ Less
Submitted 4 January, 2024; v1 submitted 2 April, 2023;
originally announced April 2023.
-
Joint RIS Calibration and Multi-User Positioning
Authors:
Yi Lu,
Hui Chen,
Jukka Talvitie,
Henk Wymeersch,
Mikko Valkama
Abstract:
Reconfigurable intelligent surfaces (RISs) are expected to be a key component enabling the mobile network evolution towards a flexible and intelligent 6G wireless platform. In most of the research works so far, RIS has been treated as a passive base station (BS) with a known state, in terms of its location and orientation, to boost the communication and/or terminal positioning performance. However…
▽ More
Reconfigurable intelligent surfaces (RISs) are expected to be a key component enabling the mobile network evolution towards a flexible and intelligent 6G wireless platform. In most of the research works so far, RIS has been treated as a passive base station (BS) with a known state, in terms of its location and orientation, to boost the communication and/or terminal positioning performance. However, such performance gains cannot be guaranteed anymore when the RIS state is not perfectly known. In this paper, by taking the RIS state uncertainty into account, we formulate and study the performance of a joint RIS calibration and user positioning (JrCUP) scheme. From the Fisher information perspective, we formulate the JrCUP problem in a network-centric single-input multiple-output (SIMO) scenario with a single BS, and derive the analytical lower bound for the states of both user and RIS. We also demonstrate the geometric impact of different user locations on the JrCUP performance while also characterizing the performance under different RIS sizes. Finally, the study is extended to a multi-user scenario, shown to further improve the state estimation performance.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
MmWave Map** and SLAM for 5G and Beyond
Authors:
Yu Ge,
Ossi Kaltiokallio,
Hyowon Kim,
Jukka Talvitie,
Sunwoo Kim,
Lennart Svensson,
Mikko Valkama,
Henk Wymeersch
Abstract:
Device localization and radar-like map** are at the heart of integrated sensing and communication, enabling not only new services and applications, but can also improve communication quality with reduced overheads. These forms of sensing are however susceptible to data association problems, due to the unknown relation between measurements and detected objects or targets. In this chapter, we prov…
▽ More
Device localization and radar-like map** are at the heart of integrated sensing and communication, enabling not only new services and applications, but can also improve communication quality with reduced overheads. These forms of sensing are however susceptible to data association problems, due to the unknown relation between measurements and detected objects or targets. In this chapter, we provide an overview of the fundamental tools used to solve map**, tracking, and simultaneous localization and map** (SLAM) problems. We distinguish the different types of sensing problems and then focus on map** and SLAM as running examples. Starting from the applicable models and definitions, we describe the different algorithmic approaches, with a particular focus on how to deal with data association problems. In particular, methods based on random finite set theory and Bayesian graphical models are introduced in detail. A numerical study with synthetic and experimental data is then used to compare these approaches in a variety of scenarios.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Doppler Exploitation in Bistatic mmWave Radio SLAM
Authors:
Yu Ge,
Ossi Kaltiokallio,
Hui Chen,
Fan Jiang,
Jukka Talvitie,
Mikko Valkama,
Lennart Svensson,
Henk Wymeersch
Abstract:
Networks in 5G and beyond utilize millimeter wave (mmWave) radio signals, large bandwidths, and large antenna arrays, which bring opportunities in jointly localizing the user equipment and map** the propagation environment, termed as simultaneous localization and map** (SLAM). Existing approaches mainly rely on delays and angles, and ignore the Doppler, although it contains geometric informati…
▽ More
Networks in 5G and beyond utilize millimeter wave (mmWave) radio signals, large bandwidths, and large antenna arrays, which bring opportunities in jointly localizing the user equipment and map** the propagation environment, termed as simultaneous localization and map** (SLAM). Existing approaches mainly rely on delays and angles, and ignore the Doppler, although it contains geometric information. In this paper, we study the benefits of exploiting Doppler in SLAM through deriving the posterior Cramér-Rao bounds (PCRBs) and formulating the extended Kalman-Poisson multi-Bernoulli sequential filtering solution with Doppler as one of the involved measurements. Both theoretical PCRB analysis and simulation results demonstrate the efficacy of utilizing Doppler.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
Towards Length-Versatile and Noise-Robust Radio Frequency Fingerprint Identification
Authors:
Guanxiong Shen,
Junqing Zhang,
Alan Marshall,
Mikko Valkama,
Joseph Cavallaro
Abstract:
Radio frequency fingerprint identification (RFFI) can classify wireless devices by analyzing the signal distortions caused by the intrinsic hardware impairments. State-of-the-art neural networks have been adopted for RFFI. However, many neural networks, e.g., multilayer perceptron (MLP) and convolutional neural network (CNN), require fixed-size input data. In addition, many IoT devices work in low…
▽ More
Radio frequency fingerprint identification (RFFI) can classify wireless devices by analyzing the signal distortions caused by the intrinsic hardware impairments. State-of-the-art neural networks have been adopted for RFFI. However, many neural networks, e.g., multilayer perceptron (MLP) and convolutional neural network (CNN), require fixed-size input data. In addition, many IoT devices work in low signal-to-noise ratio (SNR) scenarios but the RFFI performance in such scenarios is rarely investigated. In this paper, we analyze the reason why MLP- and CNN-based RFFI systems are constrained by the input size. To overcome this, we propose four neural networks that can process signals of variable lengths, namely flatten-free CNN, long short-term memory (LSTM) network, gated recurrent unit (GRU) network and transformer. We adopt data augmentation during training which can significantly improve the model's robustness to noise. We compare two augmentation schemes, namely offline and online augmentation. The results show the online one performs better. During the inference, a multi-packet inference approach is further leveraged to improve the classification accuracy in low SNR scenarios. We take LoRa as a case study and evaluate the system by classifying 10 commercial-off-the-shelf LoRa devices in various SNR conditions. The online augmentation can boost the low-SNR classification accuracy by up to 50% and the multi-packet inference approach can further increase the accuracy by over 20%.
△ Less
Submitted 6 July, 2022;
originally announced July 2022.
-
Frequency-domain digital predistortion for Massive MU-MIMO-OFDM Downlink
Authors:
Yibo Wu,
Ulf Gustavsson,
Mikko Valkama,
Alexandre Graell i Amat,
Henk Wymeersch
Abstract:
Digital predistortion (DPD) is a method commonly used to compensate for the nonlinear effects of power amplifiers (PAs). However, the computational complexity of most DPD algorithms becomes an issue in the downlink of massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM), where potentially up to several hundreds of PAs in the base station (…
▽ More
Digital predistortion (DPD) is a method commonly used to compensate for the nonlinear effects of power amplifiers (PAs). However, the computational complexity of most DPD algorithms becomes an issue in the downlink of massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM), where potentially up to several hundreds of PAs in the base station (BS) require linearization. In this paper, we propose a convolutional neural network (CNN)-based DPD in the frequency domain, taking place before the precoding, where the dimensionality of the signal space depends on the number of users, instead of the number of BS antennas. Simulation results on generalized memory polynomial (GMP)-based PAs show that the proposed CNN-based DPD can lead to very large complexity savings as the number of BS antenna increases at the expense of a small increase in power to achieve the same symbol error rate (SER).
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Flexible fast-convolution processing for cellular radio evolution
Authors:
Juha Yli-Kaakinen,
Toni Levanen,
Arto Palin,
Markku Renfors,
Mikko Valkama
Abstract:
Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been considered recently as an effective tool for spectrum enhancement of OFDM-based waveforms. FC-based filtering approximates linear convolution by effective fast Fourier…
▽ More
Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been considered recently as an effective tool for spectrum enhancement of OFDM-based waveforms. FC-based filtering approximates linear convolution by effective fast Fourier transform (FFT)-based circular convolutions using partly overlap** processing blocks. In earlier work, we have shown that FC-based filtering is a very flexible and efficient tool for filtered-OFDM signal generation and receiver side subband filtering. In this paper, we present a symbol-synchronous FC-processing scheme flexibly allowing filter re-configuration time resolution equal to one OFDM symbol while supporting tight carrier-wise filtering for 5G NR in mixed-numerology scenarios with adjustable subcarrier spacings, center frequencies, and subband bandwidths as well as providing co-exitence with LTE. The proposed scheme is demonstrated to support envisioned use cases of 5G NR and provide flexible starting point for sixth generation development.
△ Less
Submitted 5 February, 2022;
originally announced February 2022.
-
Iterated Posterior Linearization PMB Filter for 5G SLAM
Authors:
Yu Ge,
Yibo Wu,
Fan Jiang,
Ossi Kaltiokallio,
Jukka Talvitie,
Mikko Valkama,
Lennart Svensson,
Henk Wymeersch
Abstract:
5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and map** (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To s…
▽ More
5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and map** (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To solve this problem, existing 5G SLAM approaches rely on sigma-point or extended Kalman filters, linearizing the measurement function with respect to the prior probability density function (PDF). In this paper, we study the linearization of the measurement function with respect to the posterior PDF, and implement the iterated posterior linearization filter into the Poisson multi-Bernoulli SLAM filter. Simulation results demonstrate the accuracy and precision improvements of the resulting SLAM filter.
△ Less
Submitted 5 December, 2021;
originally announced December 2021.
-
Radio Frequency Fingerprint Identification for Security in Low-Cost IoT Devices
Authors:
Guanxiong Shen,
Junqing Zhang,
Alan Marshall,
Mikko Valkama,
Joseph Cavallaro
Abstract:
Radio frequency fingerprint identification (RFFI) can uniquely classify wireless devices by analyzing the received signal distortions caused by the intrinsic hardware impairments. The state-of-the-art deep learning techniques such as convolutional neural network (CNN) have been adopted to classify IoT devices with high accuracy. However, deep learning-based RFFI requires input data of a fixed size…
▽ More
Radio frequency fingerprint identification (RFFI) can uniquely classify wireless devices by analyzing the received signal distortions caused by the intrinsic hardware impairments. The state-of-the-art deep learning techniques such as convolutional neural network (CNN) have been adopted to classify IoT devices with high accuracy. However, deep learning-based RFFI requires input data of a fixed size. In addition, many IoT devices work in low signal-to-noise ratio (SNR) scenarios but the low SNR RFFI is rarely investigated. In this paper, the state-of-the-art transformer model is used as the classifier, which can process signals of variable length. Data augmentation is adopted to improve low SNR RFFI performance. A multi-packet inference approach is further proposed to improve the classification accuracy in low SNR scenarios. We take LoRa as a case study and evaluate the system by classifying 10 commercial-off-the-shelf LoRa devices in various SNR conditions. The online augmentation can boost the low SNR RFFI performance by up to 50% and multi-packet inference can further increase it by over 20%.
△ Less
Submitted 28 November, 2021;
originally announced November 2021.
-
Phase Noise Resilient Three-Level Continuous-Phase Modulation for DFT-Spread OFDM
Authors:
Markku Renfors,
Ismael Peruga Nasarre,
Toni Levanen,
Mikko Valkama,
Kari Pajukoski
Abstract:
A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and…
▽ More
A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and $\pm f_{symbol}/4$, where $f_{symbol}$ is the symbol rate -- which effectively constrains the phase transitions between consecutive symbols to 0 and $\pm π/2$ rad. Motivated by the phase controlled model of modulation, different degrees of phase continuity can be achieved, while supporting receiver processing with low complexity. The signal characteristics are improved by generating an initial time-domain nearly constant envelope signal at higher than the symbol rate. This helps to reach smooth phase transitions between 3MSK symbols. Also the possibility of using excess bandwidth is investigated by transmitting additional non-zero subcarriers outside active subcarriers of the basic DFT-s-OFDM model, which provides the capability to greatly reduce the PAPR. Due to the fact that the information is encoded in the phase transitions, a receiver model that tracks the phase variations without needing reference signals is developed. To this end, it is shown that this new modulation is well-suited for non-coherent receivers, even under strong phase noise (PN) conditions, thus allowing to reduce the overhead of reference signals. Evaluations of this physical-layer modulation and waveform scheme are performed in terms of transmitter metrics such as PAPR, OOB emissions and achievable output power after the power amplifier (PA). Finally, coded radio link evaluations are also shown and provided, demonstrating that 3MSK has a similar BER performance as that of traditional QPSK.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Beamformer Design and Optimization for Full-Duplex Joint Communication and Sensing at mm-Waves
Authors:
Carlos Baquero Barneto,
Taneli Riihonen,
Sahan Damith Liyanaarachchi,
Mikko Heino,
Nuria González-Prelcic,
Mikko Valkama
Abstract:
In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimizatio…
▽ More
In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimization problems for hybrid beamforming based multiuser multiple-input and multiple-output JCAS systems. The cost function to be maximized is the beamformed power at the sensing direction while constraining the beamformed power at the communications directions, suppressing interuser interference and cancelling full-duplexing related self-interference (SI). We then also propose new transmitter and receiver beamforming solutions for purely analog beamforming based JCAS systems that maximize the beamforming gain at the sensing direction while controlling the beamformed power at the communications direction(s), cancelling the SI as well as eliminating the potential reflection from the communication direction and optimizing the combined radar pattern (CRP). Both closed-form and numerical optimization based formulations are provided. We analyze and evaluate the performance through extensive simulations, and show that substantial gains and benefits in terms of radar transmit gain, CRP, and SI suppression can be achieved with the proposed beamforming methods.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
A Computationally Efficient EK-PMBM Filter for Bistatic mmWave Radio SLAM
Authors:
Yu Ge,
Ossi Kaltiokallio,
Hyowon Kim,
Fan Jiang,
Jukka Talvitie,
Mikko Valkama,
Lennart Svensson,
Sunwoo Kim,
Henk Wymeersch
Abstract:
Millimeter wave (mmWave) signals are useful for simultaneous localization and map** (SLAM), due to their inherent geometric connection to the propagation environment and the propagation channel. To solve the SLAM problem, existing approaches rely on sigma-point or particle-based approximations, leading to high computational complexity, precluding real-time execution. We propose a novel low-compl…
▽ More
Millimeter wave (mmWave) signals are useful for simultaneous localization and map** (SLAM), due to their inherent geometric connection to the propagation environment and the propagation channel. To solve the SLAM problem, existing approaches rely on sigma-point or particle-based approximations, leading to high computational complexity, precluding real-time execution. We propose a novel low-complexity SLAM filter, based on the Poisson multi-Bernoulli mixture (PMBM) filter. It utilizes the extended Kalman (EK) first-order Taylor series based Gaussian approximation of the filtering distribution, and applies the track-oriented marginal multi-Bernoulli/Poisson (TOMB/P) algorithm to approximate the resulting PMBM as a Poisson multi-Bernoulli (PMB). The filter can account for different landmark types in radio SLAM and multiple data association hypotheses. Hence, it has an adjustable complexity/performance trade-off. Simulation results show that the developed SLAM filter can greatly reduce the computational cost, while it keeps the good performance of map** and user state estimation.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
Converging Radar and Communications in the Superposition Transmission
Authors:
Wenbo Wang,
Bo Tan,
Elena Simona Lohan,
Mikko Valkama
Abstract:
This paper proposes a superposition transmission scheme for the future Radio Frequency (RF) convergence applications. The scheme is discussed under the assumption of a mono-static broadcasting channel topology. Under communications quality-of-service (QoS) constraints, the joint performance region of communications sum rate and radar estimation error variance is studied. Two radar signal waveforms…
▽ More
This paper proposes a superposition transmission scheme for the future Radio Frequency (RF) convergence applications. The scheme is discussed under the assumption of a mono-static broadcasting channel topology. Under communications quality-of-service (QoS) constraints, the joint performance region of communications sum rate and radar estimation error variance is studied. Two radar signal waveforms, namely linear FM and parabolic FM, are used to investigate how signal shapes may influence the estimation accuracy. Both waveforms are generated with rectangular envelope. In the end, a numerical analysis is applied, which concludes that a moderate communications QoS promises a good communications fairness while with the limited radar performance degradation.
△ Less
Submitted 24 August, 2021; v1 submitted 12 August, 2021;
originally announced August 2021.
-
mmWave Simultaneous Localization and Map** Using a Computationally Efficient EK-PHD Filter
Authors:
Ossi Kaltiokallio,
Yu Ge,
Jukka Talvitie,
Henk Wymeersch,
Mikko Valkama
Abstract:
Future cellular networks that utilize millimeter wave signals provide new opportunities in positioning and situational awareness. Large bandwidths combined with large antenna arrays provide unparalleled delay and angle resolution, allowing high accuracy localization but also building up a map of the environment. Even the most basic filter intended for simultaneous localization and map** exhibits…
▽ More
Future cellular networks that utilize millimeter wave signals provide new opportunities in positioning and situational awareness. Large bandwidths combined with large antenna arrays provide unparalleled delay and angle resolution, allowing high accuracy localization but also building up a map of the environment. Even the most basic filter intended for simultaneous localization and map** exhibits high computational overhead since the methods rely on sigma point or particle-based approximations. In this paper, a first order Taylor series based Gaussian approximation of the filtering distribution is used and it is demonstrated that the developed extended Kalman probability hypothesis density filter is computationally very efficient. In addition, the results imply that efficiency does not come with the expense of estimation accuracy since the method nearly achieves the position error bound.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
HybridDeepRx: Deep Learning Receiver for High-EVM Signals
Authors:
Jaakko Pihlajasalo,
Dani Korpi,
Mikko Honkala,
Janne M. J. Huttunen,
Taneli Riihonen,
Jukka Talvitie,
Alberto Brihuega,
Mikko A. Uusitalo,
Mikko Valkama
Abstract:
In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the…
▽ More
In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Millimeter-wave Mobile Sensing and Environment Map**: Models, Algorithms and Validation
Authors:
Carlos Baquero Barneto,
Elizaveta Rastorgueva-Foi,
Musa Furkan Keskin,
Taneli Riihonen,
Matias Turunen,
Jukka Talvitie,
Henk Wymeersch,
Mikko Valkama
Abstract:
Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment map** prospects with specific emphasis on the user equipment (UE) side. We first describe an efficient l1-regularized leas…
▽ More
Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment map** prospects with specific emphasis on the user equipment (UE) side. We first describe an efficient l1-regularized least-squares (LS) approach to obtain sparse range-angle charts at individual measurement or sensing locations. For the subsequent environment map**, we then introduce a novel state model for map** diffuse and specular scattering, which allows efficient tracking of individual scatterers over time using interacting multiple model (IMM) extended Kalman filter and smoother. Also the related measurement selection and data association problems are addressed. We provide extensive numerical indoor map** results at the 28 GHz band deploying OFDM-based 5G NR uplink waveform with 400 MHz channel bandwidth, covering both accurate ray-tracing based as well as actual RF measurement results. The results illustrate the superiority of the dynamic tracking-based solutions, compared to static reference methods, while overall demonstrate the excellent prospects of radio-based mobile environment sensing and map** in future mm-wave networks.
△ Less
Submitted 19 January, 2022; v1 submitted 23 February, 2021;
originally announced February 2021.
-
Joint Positioning and Tracking via NR Sidelink in 5G-Empowered Industrial IoT: Releasing the Potential of V2X Technology
Authors:
Yi Lu,
Mike Koivisto,
Jukka Talvitie,
Elizaveta Rastorgueva-Foi,
Toni Levanen,
Elena Simona Lohan,
Mikko Valkama
Abstract:
The fifth generation (5G) mobile networks with enhanced connectivity and positioning capabilities play an increasingly important role in the development of automated vehicle-to-everything (V2X) and other advanced industrial Internet of Things (IoT) systems. In this article, we address the prospects of 5G New Radio (NR) sidelink based V2X networks and their applicability for increasing the situatio…
▽ More
The fifth generation (5G) mobile networks with enhanced connectivity and positioning capabilities play an increasingly important role in the development of automated vehicle-to-everything (V2X) and other advanced industrial Internet of Things (IoT) systems. In this article, we address the prospects of 5G New Radio (NR) sidelink based V2X networks and their applicability for increasing the situational awareness, in terms of continuous tracking of moving connected machines and vehicles, in industrial systems. For increased system flexibility and fast deployments, we assume that the locations of the so-called anchor nodes are unknown, and describe an extended Kalman filter-based joint positioning and tracking framework in which the locations of both the anchor nodes and the target nodes can be estimated simultaneously. We assess and demonstrate the achievable 3D positioning and tracking performance in the context of a realistic industrial warehouse facility, through extensive ray-tracing based evaluations at the 26 GHz NR band. Our findings show that when both angle-based and time-based measurements are utilized, reaching sub-1 meter accuracy is realistic and that the system is also relatively robust against different node geometries. Finally, several research challenges towards achieving robust, high-performance and cost-efficient positioning solutions are outlined and discussed, identifying various potential directions for future work.
△ Less
Submitted 3 June, 2021; v1 submitted 15 January, 2021;
originally announced January 2021.
-
Frequency-Domain Signal Processing for Spectrally-Enhanced CP-OFDM Waveforms in 5G New Radio
Authors:
Juha Yli-Kaakinen,
AlaaEddin Loulou,
Toni Levanen,
Kari Pajukoski,
Arto Palin,
Markku Renfors,
Mikko Valkama
Abstract:
Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G-NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFD…
▽ More
Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G-NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFDM signal generation and receiver-side subband filtering, e.g., for the mixed-numerology scenarios of the 5G-NR. FC filtering approximates linear convolution through effective fast Fourier transform (FFT)-based circular convolutions using partly overlap** processing blocks. However, with the continuous overlap-and-save and overlap-and-add processing models with fixed block-size and fixed overlap, the FC-processing blocks cannot be aligned with all OFDM symbols of a transmission frame. Furthermore, 5G-NR numerology does not allow to use transform lengths shorter than 128 because this would lead to non-integer cyclic prefix (CP) lengths. In this article, we present new FC-processing schemes which solve the mentioned limitations. These schemes are based on dynamically adjusting the overlap periods and extrapolating the CP samples, which make it possible to align the FC blocks with each OFDM symbol, even in case of variable CP lengths. This reduces complexity and latency, e.g., in mini-slot transmissions and, as an example, allows to use 16-point transforms in case of a 12-subcarrier-wide subband allocation, greatly reducing the implementation complexity. On the receiver side, the proposed scheme makes it possible to effectively combine cascaded inverse and forward FFT units in FC-filtered OFDM processing. Transform decomposition is used to simplify these computations. Very extensive set of numerical results is also provided, in terms of radio-link performance and associated processing complexity.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Handling Spontaneous Traffic Variations in 5G+ via Offloading onto mmWave-Capable UAV `Bridges'
Authors:
Nikita Tafintsev,
Dmitri Moltchanov,
Sergey Andreev,
Shu-** Yeh,
Nageen Himayat,
Yevgeni Koucheryavy,
Mikko Valkama
Abstract:
Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs tr…
▽ More
Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs traveling over the area of interest to relieve congestion in 5G+ systems under spontaneous traffic fluctuations. To this end, we assess two inherently different offloading schemes, named routed and controlled UAV `bridging'. Using the tools of renewal theory and stochastic geometry, we analytically characterize these schemes in terms of the fraction of traffic demand that can be offloaded onto the UAV `bridge' as our parameter of interest. This framework accounts for the unique features of millimeter-wave (mmWave) radio propagation and city deployment types with potential line-of-sight (LoS) link blockage by buildings. We also introduce enhancements to the proposed schemes that significantly improve the offloading gains. Our findings offer evidence that the UAV `bridges' may be used for efficient traffic offloading in various urban scenarios.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
UAV-Aided Interference Assessment for Private 5G NR Deployments: Challenges and Solutions
Authors:
Jani Urama,
Richard Wiren,
Olga Galinina,
Juhani Kauppi,
Kimmo Hiltunen,
Juha Erkkilä,
Fedor Chernogorov,
Pentti Eteläaho,
Marjo Heikkilä,
Johan Torsner,
Sergey Andreev,
Mikko Valkama
Abstract:
Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternativ…
▽ More
Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternative due to their flexible mobility and adaptive altitude. As UAVs perform measurements quickly and semiautomatically, they can potentially assist in near realtime adjustments of the network configuration and fine-tuning its parameters, such as antenna settings and transmit power, as well as help improve indoor connectivity while respecting outdoor emission constraints. This article offers a firsthand tutorial on using aerial 5G emission assessment for interference management in nonpublic networks (NPNs) by reviewing the key challenges of UAV-mounted radio-scanner measurements. Particularly, we (i) outline the challenges of practical assessment of the outdoor interference originating from a local indoor 5G network while discussing regulatory and other related constraints and (ii) address practical methods and tools while summarizing the recent results of our measurement campaign. The reported proof of concept confirms that UAV-based systems represent a promising tool for capturing outdoor interference from private 5G systems.
△ Less
Submitted 13 June, 2020;
originally announced June 2020.
-
6G White Paper on Localization and Sensing
Authors:
Andre Bourdoux,
Andre Noll Barreto,
Barend van Liempd,
Carlos de Lima,
Davide Dardari,
Didier Belot,
Elana-Simona Lohan,
Gonzalo Seco-Granados,
Hadi Sarieddeen,
Henk Wymeersch,
Jaakko Suutala,
Jani Saloranta,
Maxime Guillaud,
Minna Isomursu,
Mikko Valkama,
Muhammad Reza Kahar Aziz,
Rafael Berkvens,
Tachporn Sanguanpuak,
Tommy Svensson,
Yang Miao
Abstract:
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principl…
▽ More
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Following the trend initiated in the 5G NR systems, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler and angular resolutions, as well as localization to cm-level degree of accuracy. Moreover, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. 6G will be truly intelligent wireless systems that will not only provide ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency and space. This white paper concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust. Addressing these challenges will undoubtedly require an inter-disciplinary and concerted effort from the research community.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Piecewise Digital Predistortion fo mmWave Active Antenna Arrays: Algorithms and Measurements
Authors:
Alberto Brihuega,
Mahmoud Abdelaziz,
Lauri Anttila,
Matias Turunen,
Markus Allén,
Thomas Eriksson,
Mikko Valkama
Abstract:
In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA u…
▽ More
In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA units. The impact of beamsteering on the DPD performance is studied, showing strong beam-dependence, thus necessitating frequent updating of the DPD. In order to facilitate fast adaptation, an inexpensive, non-iterative, pruning algorithm is introduced, which allows to significantly reduce the amount of model coefficients. The proposed methods are validated with extensive over-the-air RF measurements on a 64-element active antenna array transmitter operating at 28 GHz carrier frequency and transmitting a 400 MHz 5G New Radio (NR) standard-compliant orthogonal frequency division multiplexing waveform. The obtained results demonstrate the excellent linearization capabilities of the proposed solution, conforming to the new 5G NR requirements for frequency range 2 (FR2) in terms of both inband waveform quality and out-of-band emissions. The proposed PW-CL DPD is shown to outperform the state-of-the-art PW DPD based on the indirect learning architecture, as well as the classical single-polynomial based DPD solutions in terms of linearization performance and computational complexity by a clear margin.
△ Less
Submitted 30 April, 2020; v1 submitted 13 March, 2020;
originally announced March 2020.
-
5G New Radio Evolution Towards Sub-THz Communications
Authors:
Oskari Tervo,
Toni Levanen,
Kari Pajukoski,
Jari Hulkkonen,
Pekka Wainio,
Mikko Valkama
Abstract:
In this paper, the potential of extending 5G New Radio physical layer solutions to support communications in sub-THz frequencies is studied. More specifically, we introduce the status of third generation partnership project studies related to operation on frequencies beyond 52.6 GHz and note also the recent proposal on spectrum horizons provided by federal communications commission (FCC) related t…
▽ More
In this paper, the potential of extending 5G New Radio physical layer solutions to support communications in sub-THz frequencies is studied. More specifically, we introduce the status of third generation partnership project studies related to operation on frequencies beyond 52.6 GHz and note also the recent proposal on spectrum horizons provided by federal communications commission (FCC) related to experimental licenses on 95 GHz - 3 THz frequency band. Then, we review the power amplifier (PA) efficiency and output power challenge together with the increased phase noise (PN) distortion effect in terms of the supported waveforms. As a practical example on the waveform and numerology design from the perspective of the PN robustness, link performance results using 90 GHz carrier frequency are provided. The numerical results demonstrate that new, higher subcarrier spacings are required to support high throughput, which requires larger changes in the physical layer design. It is also observed that new phase-tracking reference signal designs are required to make the system robust against PN. The results illustrate that single-carrier frequency division multiple access is significantly more robust against PN and can provide clearly larger PA output power than cyclic-prefix orthogonal frequency division multiplexing, and is therefore a highly potential waveform for sub-THz communications.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
Novel Wake-up Scheme for Energy-Efficient Low-Latency Mobile Devices in 5G Networks
Authors:
Soheil Rostami,
Kari Heiska,
Oleksandr Puchko,
Kari Leppanen,
Mikko Valkama
Abstract:
Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control sig…
▽ More
Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control signaling, and thus all instances without any actual data allocation leads to unnecessary energy consumption. This fact together with the long start-up and power-down times can prevent adopting frequent wake-up instants, which in turn leads to considerable latency. In this work,a novel wake-up scheme is described and studied, to tackle the trade-off between latency and battery lifetime in future 5G networks, seeking thus to facilitate an always-available experience, rather than always-on. Analytical and simulation-based results show that the proposed scheme is a promising approach to control the user plane latency and energy consumption, when the device is operating in the power saving mode. The aim of this article is to describe the overall wake-up system operating principle and the associated signaling methods,receiver processing solutions and essential implementation aspects. Additionally, the advantages compared to DRX-based systems are shown and demonstrated, through the analysis of the system energy-efficiency and latency characteristics, with special emphasis on future 5G-grade mobile devices
△ Less
Submitted 3 January, 2020;
originally announced January 2020.
-
Mobile Communications Beyond 52.6 GHz: Waveforms, Numerology, and Phase Noise Challenge
Authors:
Toni Levanen,
Oskari Tervo,
Kari Pajukoski,
Markku Renfors,
Mikko Valkama
Abstract:
In this article, the first considerations for the 5G New Radio (NR) physical layer evolution to support beyond 52.6GHz communications are provided. In addition, the performance of both OFDM based and DFT-s-OFDM based networks are evaluated with special emphasis on the phase noise (PN) induced distortion. It is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15 assumptions, name…
▽ More
In this article, the first considerations for the 5G New Radio (NR) physical layer evolution to support beyond 52.6GHz communications are provided. In addition, the performance of both OFDM based and DFT-s-OFDM based networks are evaluated with special emphasis on the phase noise (PN) induced distortion. It is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15 assumptions, namely regarding the supported phase tracking reference signal (PTRS) designs, since it enables more effective PN mitigation directly in the time domain. To further improve the PN compensation capabilities, the PTRS design for DFT-s-OFDM is revised, while for the OFDM waveform a novel block PTRS structure is introduced, providing similar link performance as DFT-s-OFDM with enhanced PTRS design. We demonstrate that the existing 5G NR Release 15 solutions can be extended to support efficient mobile communications at 60GHz carrier frequency with the enhanced PTRS structures. In addition, DFT-s-OFDM based downlink for user data could be considered for beyond 52.6GHz communications to further improve system power efficiency and performance with higher order modulation and coding schemes. Finally, network link budget and cell size considerations are provided, showing that at certain bands with specific transmit power regulation, the cell size can eventually be downlink limited.
△ Less
Submitted 8 May, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
PAPR Reduction with Mixed-Numerology OFDM
Authors:
Selahattin Gökceli,
Toni Levanen,
Juha Yli-Kaakinen,
Taneli Riihonen,
Markku Renfors,
Mikko Valkama
Abstract:
High peak-to-average power ratio (PAPR) is a critical problem in orthogonal frequency-division multiplexing (OFDM). The fifth-generation New Radio (5G NR) facilitates the utilization of multiple heterogeneous bandwidth parts (BWPs), which complicates the PAPR problem even further and introduces inter-numerology interference (INI) between the BWPs. This paper proposes two novel schemes to reduce th…
▽ More
High peak-to-average power ratio (PAPR) is a critical problem in orthogonal frequency-division multiplexing (OFDM). The fifth-generation New Radio (5G NR) facilitates the utilization of multiple heterogeneous bandwidth parts (BWPs), which complicates the PAPR problem even further and introduces inter-numerology interference (INI) between the BWPs. This paper proposes two novel schemes to reduce the PAPR of mixed-numerology OFDM signals. The first scheme is an original enhanced iterative clip**-and-error-filtering (ICEF) approach that cancels efficiently the INI along with PAPR reduction. This allows to achieve efficient PAPR reduction while being compatible with well-known windowed overlap-and-add (WOLA) processing. The second scheme is based on fast-convolution (FC) processing, where PAPR reduction is embedded in the FC filtering carried out using overlap** processing blocks. This allows one to use any existing block-wise PAPR reduction method to reduce the composite signals' PAPR with arbitrary BWP waveforms, and it is thus especially well suited for processing mixed-numerology composite waveforms carrying multiple BWPs with different OFDM numerologies. The performance of the proposed algorithms is evaluated in the 5G NR context, and the essential performance advantages are demonstrated and quantified.
△ Less
Submitted 5 September, 2019;
originally announced September 2019.
-
Full-Duplex OFDM Radar With LTE and 5G NR Waveforms: Challenges, Solutions, and Measurements
Authors:
Carlos Baquero Barneto,
Taneli Riihonen,
Matias Turunen,
Lauri Anttila,
Marko Fleischer,
Kari Stadius,
Jussi Ryynänen,
Mikko Valkama
Abstract:
This paper studies the processing principles, implementation challenges, and performance of OFDM-based radars, with particular focus on the fourth-generation Long-Term Evolution (LTE) and fifth-generation (5G) New Radio (NR) mobile networks' base stations and their utilization for radar/sensing purposes. First, we address the problem stemming from the unused subcarriers within the LTE and NR trans…
▽ More
This paper studies the processing principles, implementation challenges, and performance of OFDM-based radars, with particular focus on the fourth-generation Long-Term Evolution (LTE) and fifth-generation (5G) New Radio (NR) mobile networks' base stations and their utilization for radar/sensing purposes. First, we address the problem stemming from the unused subcarriers within the LTE and NR transmit signal passbands, and their impact on frequency-domain radar processing. Particularly, we formulate and adopt a computationally efficient interpolation approach to mitigate the effects of such empty subcarriers in the radar processing. We evaluate the target detection and the corresponding range and velocity estimation performance through computer simulations, and show that high-quality target detection as well as high-precision range and velocity estimation can be achieved. Especially 5G NR waveforms, through their impressive channel bandwidths and configurable subcarrier spacing, are shown to provide very good radar/sensing performance. Then, a fundamental implementation challenge of transmitter-receiver (TX-RX) isolation in OFDM radars is addressed, with specific emphasis on shared-antenna cases, where the TX-RX isolation challenges are the largest. It is confirmed that from the OFDM radar processing perspective, limited TX-RX isolation is primarily a concern in detection of static targets while moving targets are inherently more robust to transmitter self-interference. Properly tailored analog/RF and digital self-interference cancellation solutions for OFDM radars are also described and implemented, and shown through RF measurements to be key technical ingredients for practical deployments, particularly from static and slowly moving targets' point of view.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
On Antenna Array Out-of-Band Emissions
Authors:
Lauri Anttila,
Alberto Brihuega,
Mikko Valkama
Abstract:
We substantiate and extend recent research on the behavior of the out-of-band emissions in antenna array transmitters. Specifically, with multi-user precoding, we show that the emissions are always beamformed in the directions of the intended receivers, contrary to some claims in the recent literature. Moreover, while also other spurious directions exist, we show that the emissions are always stro…
▽ More
We substantiate and extend recent research on the behavior of the out-of-band emissions in antenna array transmitters. Specifically, with multi-user precoding, we show that the emissions are always beamformed in the directions of the intended receivers, contrary to some claims in the recent literature. Moreover, while also other spurious directions exist, we show that the emissions are always strongest in the directions of the intended receivers. We also show that power amplifiers with mutually different nonlinear phase characteristics will reduce the beamforming gain of the unwanted emissions, with the gain approaching the noncoherent combining limit as the phase deviations are increased.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Linearizing Active Antenna Arrays: Method and Measurements
Authors:
Alberto Brihuega,
Mahmoud Abdelaziz,
Matias Turunen,
Thomas Eriksson,
Lauri Anttila,
Mikko Valkama
Abstract:
In this paper, we provide a novel framework for efficient digital predistortion (DPD) based linearization of active antenna arrays with multiple and mutually different nonlinear power amplifiers. The proposed method builds on the use of a combined feedback signal essentially characterizing the observable nonlinear distortion at the receiving end. The proposed method is validated with extensive ove…
▽ More
In this paper, we provide a novel framework for efficient digital predistortion (DPD) based linearization of active antenna arrays with multiple and mutually different nonlinear power amplifiers. The proposed method builds on the use of a combined feedback signal essentially characterizing the observable nonlinear distortion at the receiving end. The proposed method is validated with extensive over-the-air RF measurements on a 64-element active antenna array transmitter operating at 28 GHz carrier frequency and transmitting a 200 MHz wide 5G New Radio (NR) waveform. The obtained results demonstrate the excellent linearization capabilities of the proposed solution, which allows for a very efficient implementation in practical systems.
△ Less
Submitted 18 July, 2019;
originally announced July 2019.
-
Gradient-Adaptive Spline-Interpolated LUT Methods for Low-Complexity Digital Predistortion
Authors:
Pablo Pascual Campo,
Alberto Brihuega,
Lauri Anttila,
Matias Turunen,
Dani Korpi,
Markus Allén,
Mikko Valkama
Abstract:
In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse resp…
▽ More
In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse response (FIR) filter. The second proposed method, the spline-based memory polynomial (SMP) approach, contains multiple parallel complex spline-interpolated LUTs together with an input delay line such that more versatile memory modeling can be achieved. For both structures, gradient-based learning algorithms are derived to efficiently estimate the LUT control points and other related DPD parameters. Large set of experimental results are provided, with specific focus on 5G New Radio (NR) systems, showing successful linearization of multiple sub-6 GHz PA samples as well as a 28 GHz active antenna array, incorporating channel bandwidths up to 200 MHz. Explicit performance-complexity comparisons are also reported between the SPH and SMP DPD systems and the widely-applied ordinary memory-polynomial (MP) DPD solution. The results show that the linearization capabilities of the proposed methods are very close to that of the ordinary MP DPD, particularly with the proposed SMP approach, while having substantially lower processing complexity.
△ Less
Submitted 2 July, 2020; v1 submitted 4 July, 2019;
originally announced July 2019.
-
Positioning and Location-Aware Communications for Modern Railways with 5G New Radio
Authors:
Jukka Talvitie,
Toni Levanen,
Mike Koivisto,
Tero Ihalainen,
Kari Pajukoski,
Mikko Valkama
Abstract:
Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient…
▽ More
Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient beam-management and beamforming, as well as for downlink Doppler precompensation in the single-frequency network context. Additionally, with particular focus on millimeter wave networks, novel concepts for low-latency intercarrier interference (ICI) estimation and compensation, due to residual Doppler and oscillator phase noise, are described and demonstrated. The provided numerical results at 30 GHz operating band show that sub-meter positioning and sub-degree beam-direction accuracies can be obtained with very high probabilities in the order of 95-99%. The results also show that the described Doppler precompensation and ICI estimation and cancellation methods substantially improve the throughput of the single-frequency HST network.
△ Less
Submitted 6 May, 2019; v1 submitted 29 April, 2019;
originally announced May 2019.
-
Digital Predistortion for Multiuser Hybrid MIMO at mmWaves
Authors:
Alberto Brihuega,
Lauri Anttila,
Mahmoud Abdelaziz,
Fredrik Tufvesson,
Mikko Valkama
Abstract:
Efficient mitigation of power amplifier (PA) nonlinear distortion in multi-user hybrid precoding based broadband mmWave systems is an open research problem. In this article, we first carry out detailed signal and distortion modeling in broadband multi-user hybrid MIMO systems, with a bank of nonlinear PAs in each subarray, while also take the inevitable crosstalk between the antenna/PA branches in…
▽ More
Efficient mitigation of power amplifier (PA) nonlinear distortion in multi-user hybrid precoding based broadband mmWave systems is an open research problem. In this article, we first carry out detailed signal and distortion modeling in broadband multi-user hybrid MIMO systems, with a bank of nonlinear PAs in each subarray, while also take the inevitable crosstalk between the antenna/PA branches into account. Building on the derived models, we then propose an efficient closed-loop (CL) digital predistortion (DPD) solution that requires only a single-input DPD unit per transmit chain or subarray, despite crosstalk, providing substantial complexity-benefit compared to the state-of-the art multi-dimensional DPD solutions. We show that under spatially correlated multipath propagation, each DPD unit can provide linearization towards every intended user, or more generally, towards all spatial directions where coherent propagation is taking place, and that the proposed CL DPD system is robust against crosstalk}. Extensive numerical results building on practical measurement-based mmWave PA models are provided, demonstrating and verifying the excellent linearization performance of the proposed DPD system in different evaluation scenarios.
△ Less
Submitted 18 May, 2020; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Frequency-Selective PAPR Reduction for OFDM
Authors:
Selahattin Gökceli,
Toni Levanen,
Taneli Riihonen,
Markku Renfors,
Mikko Valkama
Abstract:
We study the peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing (OFDM) systems. In conventional clip** and filtering based PAPR reduction techniques, clip** noise is allowed to spread over the whole active passband, thus degrading the transmit signal quality similarly at all active subcarriers. However, since modern radio networks support frequency-multipl…
▽ More
We study the peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing (OFDM) systems. In conventional clip** and filtering based PAPR reduction techniques, clip** noise is allowed to spread over the whole active passband, thus degrading the transmit signal quality similarly at all active subcarriers. However, since modern radio networks support frequency-multiplexing of users and services with highly different quality-of-service expectations, clip** noise from PAPR reduction should be distributed unequally over the corresponding physical resource blocks (PRBs). To facilitate this, we present an efficient PAPR reduction technique, where clip** noise can be flexibly controlled and filtered inside the transmitter passband, allowing to control the transmitted signal quality per PRB. Numerical results are provided in 5G New Radio (NR) mobile network context, demonstrating the flexibility and efficiency of the proposed method.
△ Less
Submitted 1 April, 2019; v1 submitted 20 February, 2019;
originally announced February 2019.
-
Digital Cancellation of Passive Intermodulation in FDD Transceivers
Authors:
Muhammad Zeeshan Waheed,
Pablo Pascual Campo,
Dani Korpi,
Adnan Kiayani,
Lauri Anttila,
Mikko Valkama
Abstract:
Modern radio systems and transceivers utilize carrier aggregation (CA) to meet the demands for higher and higher data rates. However, the adoption of CA in the existing Long Term Evolution (LTE)-Advanced and emerging 5G New Radio (NR) mobile networks, in case of frequency division duplexing (FDD), may incur self-interference challenges with certain band combinations. More specifically, the nonline…
▽ More
Modern radio systems and transceivers utilize carrier aggregation (CA) to meet the demands for higher and higher data rates. However, the adoption of CA in the existing Long Term Evolution (LTE)-Advanced and emerging 5G New Radio (NR) mobile networks, in case of frequency division duplexing (FDD), may incur self-interference challenges with certain band combinations. More specifically, the nonlinear distortion products of the transmit signals or component carriers (CCs), stemming from the passive radio frequency (RF) front-end components of the transceiver, can appear in one or more of the configured receiver bands, potentially leading to the receiver desensitization. In this paper, we present advanced baseband equivalent signal models for such passive intermodulation (PIM) distortion viewed from the RX point of view, considering also potential memory effects in the PIM generation. Then, building on these signal models, a digital self-interference cancellation technique operating in the transceiver digital front-end is presented. The performance of the proposed solution is evaluated with real-life RF measurements for LTE-Advanced type user equipment (UE) with dual CC inter-band CA, demonstrating excellent suppression properties. The findings in this work indicate that digital cancellation is a feasible approach for improving the receiver sensitivity of mobile devices that may be prone to RF front-end induced PIM challenges.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Digital Predistortion in Large-Array Digital Beamforming Transmitters
Authors:
Alberto Brihuega,
Lauri Anttila,
Mahmoud Abdelaziz,
Mikko Valkama
Abstract:
In this article, we propose a novel digital predistortion (DPD) solution that allows to considerably reduce the complexity resulting from linearizing a set of power amplifiers (PAs) in single-user large-scale digital beamforming transmitters. In contrast to current state-of-the art solutions that assume a dedicated DPD per power amplifier, which is unfeasible in the context of large antenna arrays…
▽ More
In this article, we propose a novel digital predistortion (DPD) solution that allows to considerably reduce the complexity resulting from linearizing a set of power amplifiers (PAs) in single-user large-scale digital beamforming transmitters. In contrast to current state-of-the art solutions that assume a dedicated DPD per power amplifier, which is unfeasible in the context of large antenna arrays, the proposed solution only requires a single DPD in order to linearize an arbitrary number of power amplifiers. To this end, the proposed DPD predistorts the signal at the input of the digital precoder based on minimizing the nonlinear distortion of the combined signal at the intended receiver direction. This is a desirable feature, since the resulting emissions in other directions get partially diluted due to less coherent superposition. With this approach, only a single DPD is required, yielding great complexity and energy savings.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Benefits of Positioning-Aided Communication Technology in High-Frequency Industrial IoT
Authors:
Mike Koivisto,
Olga Galinina,
Sergey Andreev,
Antti Tölli,
Giuseppe Destino,
Mário Costa,
Kari Leppänen,
Yevgeni Koucheryavy,
Mikko Valkama
Abstract:
The future of industrial applications is shaped by intelligent moving IoT devices, such as flying drones, advanced factory robots, and connected vehicles, which may operate (semi-)autonomously. In these challenging scenarios, dynamic radio connectivity at high frequencies -- augmented with timely positioning-related information -- becomes instrumental to improve communication performance and facil…
▽ More
The future of industrial applications is shaped by intelligent moving IoT devices, such as flying drones, advanced factory robots, and connected vehicles, which may operate (semi-)autonomously. In these challenging scenarios, dynamic radio connectivity at high frequencies -- augmented with timely positioning-related information -- becomes instrumental to improve communication performance and facilitate efficient computation offloading. Our work reviews the main research challenges and reveals open implementation gaps in Industrial IoT (IIoT) applications that rely on location awareness and multi-connectivity in super high and extremely high frequency bands. It further conducts a rigorous numerical investigation to confirm the potential of precise device localization in the emerging IIoT systems. We focus on positioning-aided benefits made available to multi-connectivity IIoT device operation at 28 GHz, which notably improve data transfer rates, communication latency, and extent of control overhead.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
Transparent Tx and Rx Waveform Processing for 5G New Radio Mobile Communications
Authors:
Toni Levanen,
Juho Pirskanen,
Kari Pajukoski,
Markku Renfors,
Mikko Valkama
Abstract:
Several different waveform processing techniques have been studied and proposed for the 5G new radio (NR) physical layer, to support new mixed numerology and asynchronous services. The evaluation and comparison of these different techniques is commonly based on matched waveform processing in the transmitter and receiver units. In this article, it is shown that different techniques can be flexibly…
▽ More
Several different waveform processing techniques have been studied and proposed for the 5G new radio (NR) physical layer, to support new mixed numerology and asynchronous services. The evaluation and comparison of these different techniques is commonly based on matched waveform processing in the transmitter and receiver units. In this article, it is shown that different techniques can be flexibly mixed, allowing to separately optimize complexity-performance trade-offs for transmitter and receiver implementations. Mixing of different waveform processing techniques is possible by setting adequate requirements for transmitter and receiver baseband processing allowing transparent design. The basic framework of how transmitter and receiver units can be independently applied and evaluated in the context of transparent design and an extensive set of examples of the achievable radio link performance with unmatched transmitter and receiver waveform processing are provided. The discussed approach and solutions simplify standardization, improve transparent transmitter and receiver coexistence, and allow future-proof evolution path for performance improvements in 5G NR physical layer hardware and algorithm design.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Performance Comparison of Constant Envelope and Zero-forcing Precoders in Multiuser Massive MIMO
Authors:
Alberto Brihuega,
Lauri Anttila,
Mikko Valkama
Abstract:
In this article, the adoption and performance of a constant envelope (CE) type spatial precoder is addressed in large-scale multiuser MIMO based cellular network. We first formulate an efficient computing solution to obtain the antenna samples of such CE precoder. We then evaluate the achievable CE precoder based multiuser downlink (DL) system performance and compare it with the corresponding perf…
▽ More
In this article, the adoption and performance of a constant envelope (CE) type spatial precoder is addressed in large-scale multiuser MIMO based cellular network. We first formulate an efficient computing solution to obtain the antenna samples of such CE precoder. We then evaluate the achievable CE precoder based multiuser downlink (DL) system performance and compare it with the corresponding performance of more ordinary zero-forcing (ZF) spatial precoder. We specifically also analyze how realistic highly nonlinear power amplifiers (PAs) affect the achievable DL performance, as the individual PA units in large-array or massive MIMO systems are expected to be small, cheap and operating close to saturation for increased energy-efficiency purposes. It is shown that the largely reduced peak-to-average power ratio (PAPR) of the PA input signals in the CE precoder based system allows for pushing the PA units harsher towards saturation, while allowing to reach higher signal-to-interference-plus-noise ratio (SINRs) at the intended receivers compared to the classical ZF precoder based system. The obtained results indicate that the CE precoder can outperform the ZF precoder by up to 5-6 dBs, in terms of the achievable SINRs, when the PA units are pushed towards their saturating region. Such large gains are a substantial benefit when seeking to improve the spectral and energy-efficiencies of the mobile cellular networks.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Digital Predistortion for Hybrid MIMO Transmitters
Authors:
Mahmoud Abdelaziz,
Lauri Anttila,
Alberto Brihuega,
Fredrik Tufvesson,
Mikko Valkama
Abstract:
This article investigates digital predistortion (DPD) linearization of hybrid beamforming large-scale antenna transmitters. We propose a novel DPD processing and learning technique for an antenna sub-array, which utilizes a combined signal of the individual power amplifier (PA) outputs in conjunction with a decorrelation-based learning rule. In effect, the proposed approach results in minimizing t…
▽ More
This article investigates digital predistortion (DPD) linearization of hybrid beamforming large-scale antenna transmitters. We propose a novel DPD processing and learning technique for an antenna sub-array, which utilizes a combined signal of the individual power amplifier (PA) outputs in conjunction with a decorrelation-based learning rule. In effect, the proposed approach results in minimizing the nonlinear distortions in the direction of the intended receiver. This feature is highly desirable, since emissions in other directions are naturally weak due to beamforming. The proposed parameter learning technique requires only a single observation receiver, and therefore supports simple hardware implementation. It is also shown to clearly outperform the current state-of-the-art technique which utilizes only a single PA for learning. Analysis of the feedback network amplitude and phase imbalances reveals that the technique is robust even to high levels of such imbalances. Finally, we also show that the array system out-of-band emissions are well-behaving in all spatial directions, and essentially below those of the corresponding single-antenna transmitter, due to the combined effects of the DPD and beamforming.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
User Positioning in mmW 5G Networks using Beam-RSRP Measurements and Kalman Filtering
Authors:
Elizaveta Rastorgueva-Foi,
Mário Costa,
Mike Koivisto,
Kari Leppänen,
Mikko Valkama
Abstract:
In this paper, we exploit the 3D-beamforming features of multiantenna equipment employed in fifth generation (5G) networks, operating in the millimeter wave (mmW) band, for accurate positioning and tracking of users. We consider sequential estimation of users' positions, and propose a two-stage extended Kalman filter (EKF) that is based on reference signal received power (RSRP) measurements. In pa…
▽ More
In this paper, we exploit the 3D-beamforming features of multiantenna equipment employed in fifth generation (5G) networks, operating in the millimeter wave (mmW) band, for accurate positioning and tracking of users. We consider sequential estimation of users' positions, and propose a two-stage extended Kalman filter (EKF) that is based on reference signal received power (RSRP) measurements. In particular, beamformed downlink (DL) reference signals (RS) are transmitted by multiple base stations (BSs) and measured by user equipmentn(UE) employing receive beamforming. The so-obtained BRSRP measurements are fed back to the BS where the corresponding direction-of-departure are sequentially estimated by a novel EKF. Such angle estimates from multiple BSs are subsequently fused on a central entity into 3D position estimates of UE by means of an angle-based EKF. The proposed positioning scheme is scalable since the computational burden is shared among different network entities, namely transmission/reception points (TRPs) and 5G-NR Node B (gNB), and may be accomplished with the signalling currently specified for 5G. We assess the performance of the proposed algorithm on a realistic outdoor 5G deployment with a detailed ray tracing propagation model based on the METIS Madrid map. Numerical results with a system operating at 39 GHz show that sub-meter 3D positioning accuracy is achievable in future mmW 5G networks.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
Adaptive Nonlinear RF Cancellation for Improved Isolation in Simultaneous Transmit-Receive Systems
Authors:
Adnan Kiayani,
Muhammad Zeeshan Waheed,
Lauri Anttila,
Mahmoud Abdelaziz,
Dani Korpi,
Ville Syrjälä,
Marko Kosunen,
Kari Stadius,
Jussi Ryynänen,
Mikko Valkama
Abstract:
This paper proposes an active radio frequency (RF) cancellation solution to suppress the transmitter (TX) passband leakage signal in radio transceivers supporting simultaneous transmission and reception. The proposed technique is based on creating an opposite-phase baseband equivalent replica of the TX leakage signal in the transceiver digital front-end through adaptive nonlinear filtering of the…
▽ More
This paper proposes an active radio frequency (RF) cancellation solution to suppress the transmitter (TX) passband leakage signal in radio transceivers supporting simultaneous transmission and reception. The proposed technique is based on creating an opposite-phase baseband equivalent replica of the TX leakage signal in the transceiver digital front-end through adaptive nonlinear filtering of the known transmit data, to facilitate highly accurate cancellation under a nonlinear TX power amplifier (PA). The active RF cancellation is then accomplished by employing an auxiliary transmitter chain, to generate the actual RF cancellation signal, and combining it with the received signal at the receiver (RX) low noise amplifier (LNA) input. A closed-loop parameter learning approach, based on the decorrelation principle, is also developed to efficiently estimate the coefficients of the nonlinear cancellation filter in the presence of a nonlinear TX PA with memory, finite passive isolation, and a nonlinear RX LNA. The performance of the proposed cancellation technique is evaluated through comprehensive RF measurements adopting commercial LTE-Advanced transceiver hardware components. The results show that the proposed technique can provide an additional suppression of up to 54 dB for the TX passband leakage signal at the RX LNA input, even at considerably high transmit power levels and with wide transmission bandwidths. Such novel cancellation solution can therefore substantially improve the TX-RX isolation, hence reducing the requirements on passive isolation and RF component linearity, as well as increasing the efficiency and flexibility of the RF spectrum use in the emerging 5G radio networks.
△ Less
Submitted 22 December, 2017; v1 submitted 16 August, 2017;
originally announced September 2017.
-
Low-Complexity Sub-band Digital Predistortion for Spurious Emission Suppression in Noncontiguous Spectrum Access
Authors:
Mahmoud Abdelaziz,
Lauri Anttila,
Chance Tarver,
Kaipeng Li,
Joseph R. Cavallaro,
Mikko Valkama
Abstract:
Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing (FDD) transc…
▽ More
Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing (FDD) transceivers. In this article, to suppress such unwanted emissions, a low-complexity sub-band DPD solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared to classical linearization solutions. Furthermore, novel decorrelation based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions.
△ Less
Submitted 19 August, 2016; v1 submitted 8 July, 2016;
originally announced July 2016.