Showing 1–34 of 34 results for author: Tolli, A

On the Optimal MMSE Channel Estimation for One-Bit Quantized MIMO Systems

Authors: Minhua Ding, Italo Atzeni, Antti Tölli, A. Lee Swindlehurst

Abstract: This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically s… ▽ More This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically suboptimal Bussgang linear MMSE (BLMMSE) estimator has been widely adopted. In this work, we develop a new framework to compute the MMSE channel estimator that hinges on computation of the orthant probability of the multivariate normal distribution. Based on this framework, we determine a necessary and sufficient condition for the BLMMSE channel estimator to be optimal and equivalent to the MMSE estimator. Under the assumption of specific channel correlation or pilot symbols, we further utilize the framework to derive analytical expressions for the MMSE channel estimator that are particularly convenient for computation when certain system dimensions become large, thereby enabling a comparison between the BLMMSE and MMSE channel estimators in these cases. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: IEEE journal submission, 13 pages, 5 figures

MSC Class: 94A12; 94A05

Combined DL-UL Distributed Beamforming Design for Cell-Free Massive MIMO

Authors: Bikshapathi Gouda, Antti Arvola, Italo Atzeni, Antti Tölli

Abstract: We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL… ▽ More We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL UEs, respectively. To this end, we propose distributed beamforming designs enabled by iterative bi-directional training (IBT) and based on the minimum mean squared error criterion. To reduce the IBT overhead and thus enhance the effective DL and UL rates, we carry out the distributed beamforming design by assuming that all the UEs are served solely in the DL and then utilize the obtained beamformers for the DL and UL data transmissions after proper scaling. Numerical results show the superiority of the proposed combined DL-UL distributed beamforming design over separate DL and UL designs, especially with short resource blocks. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: Published in IEEE WCL

MSC Class: 14J60 ACM Class: F.2.2; I.2.7

Enhanced data Detection for Massive MIMO with 1-Bit ADCs

Authors: Amin Radbord, Italo Atzeni, Antti Tolli

Abstract: We present new insightful results on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The expected values of the soft-estimated symbols (i.e., after the linear combining and prior to the data detection) have been recently characterized for multiple user equipments (UEs) and maximum ratio combining (MRC) receiver at the base stati… ▽ More We present new insightful results on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The expected values of the soft-estimated symbols (i.e., after the linear combining and prior to the data detection) have been recently characterized for multiple user equipments (UEs) and maximum ratio combining (MRC) receiver at the base station. In this paper, we first provide a numerical evaluation of the expected value of the soft-estimated symbols with zero-forcing (ZF) and minimum mean squared error (MMSE) receivers for a multi-UE setting with correlated Rayleigh fading. Then, we propose a joint data detection (JD) strategy, which exploits the interdependence among the soft-estimated symbols of the interfering UEs, along with its low-complexity variant. These strategies are compared with a naive approach that adapts the maximum-likelihood data detection to the 1-bit quantization. Numerical results show that ZF and MMSE provide considerable gains over MRC in terms of symbol error rate. Moreover, the proposed JD and its low-complexity variant provide a significant boost in comparison with the single-UE data detection. △ Less

Submitted 7 December, 2023; originally announced December 2023.

Comments: Presented at the IEEE Asilomar Conference on Signals, Systems, and Computers 2023. arXiv admin note: text overlap with arXiv:2303.18061

Low-complexity Linear Multicast Beamforming for Cache-aided MIMO Communications

Authors: Mohammad NaseriTehrani, MohammadJavad Salehi, Antti Tölli

Abstract: A practical and scalable multicast beamformer design in multi-input multi-output~(MIMO) coded caching~(CC) systems is introduced in this paper. The proposed approach allows multicast transmission to multiple groups with partially overlap** user sets using receiver dimensions to distinguish between different group-specific streams. Additionally, it provides flexibility in accommodating various pa… ▽ More A practical and scalable multicast beamformer design in multi-input multi-output~(MIMO) coded caching~(CC) systems is introduced in this paper. The proposed approach allows multicast transmission to multiple groups with partially overlap** user sets using receiver dimensions to distinguish between different group-specific streams. Additionally, it provides flexibility in accommodating various parameter configurations of the MIMO-CC setup and overcomes practical limitations, such as the requirement to use successive interference cancellation~(SIC) at the receiver, while achieving the same degrees-of-freedom~(DoF). To evaluate the proposed scheme, we define the symmetric rate as the sum rate of the partially overlap** streams received per user, comprising a linear multistream multicast transmission vector and the linear minimum mean square error~(LMMSE) receiver. The resulting non-convex symmetric rate maximization problem is solved using alternative optimization and successive convex approximation~(SCA). Moreover, a fast iterative Lagrangian-based algorithm is developed, significantly reducing the computational overhead compared to previous designs. The effectiveness of our proposed method is demonstrated by extensive simulations. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Doubly 1-Bit Quantized Massive MIMO

Authors: Italo Atzeni, Antti Tölli, Duy H. N. Nguyen, A. Lee Swindlehurst

Abstract: Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In… ▽ More Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In this paper, we analyze the extreme scenario where both the transmit- and receive-side are equipped with fully digital massive MIMO arrays and 1-bit DACs/ADCs, which leads to a system with minimum radio-frequency complexity, cost, and power consumption. Building upon the Bussgang decomposition, we derive a tractable approximation of the mean squared error (MSE) between the transmitted data symbols and their soft estimates. Numerical results show that, despite its simplicity, a doubly 1-bit quantized massive MIMO system with very large antenna arrays can deliver an impressive performance in terms of MSE and symbol error rate. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Comments: Presented at the IEEE Asilomar Conference on Signals, Systems, and Computers 2023

Pilot-Based Uplink Power Control in Single-UE Massive MIMO Systems With 1-Bit ADCs

Authors: Amila Ravinath, Bikshapathi Gouda, Italo Atzeni, Antti Tölli

Abstract: We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonici… ▽ More We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonicity, which is utilized at the base station to derive UE transmit power adjustments via single-shot or differential power control (DPC) techniques. Both methods enable closed-loop uplink PC using different feedback approaches. The single-shot method employs one-time multi-bit feedback, while the DPC method relies on continuous adjustments with 1-bit feedback. Numerical results demonstrate the superiority of the proposed schemes over conventional closed-loop uplink PC techniques. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Uplink Power Control for Distributed Massive MIMO with 1-Bit ADCs

Authors: Bikshapathi Gouda, Italo Atzeni, Antti Tölli

Abstract: We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the U… ▽ More We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the UE transmit power. With multiple BSs, the SNDR at the output of the joint combiner can be made unimodal by adding properly tuned dithering at each BS. As a result, the UE can be effectively served by multiple BSs with 1-bit ADCs. Considering the signal-to-interference-plus-noise-anddistortion ratio (SINDR) in the multi-UE scenario, we aim at optimizing the UE transmit powers and the dithering at each BS based on the min-power and max-min-SINDR criteria. To this end, we propose three algorithms with different convergence and complexity properties. Numerical results show that, if the desired SINDR can only be achieved via joint combining across multiple BSs with properly tuned dithering, the optimal UE transmit power is imposed by the distance to the farthest serving BS (unlike in the unquantized case). In this context, dithering plays a crucial role in enhancing the SINDR, especially for UEs with significant path loss disparity among the serving BSs. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Comments: Accpted in Globecom2023

MSC Class: 14J60 (Primary)

Fairness Enhancement of UAV Systems with Hybrid Active-Passive RIS

Authors: Nhan Thanh Nguyen, Van-Dinh Nguyen, Hieu Van Nguyen, Qingqing Wu, Antti Tolli, Symeon Chatzinotas, Markku Juntti

Abstract: We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same ti… ▽ More We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same time, and the mobile-UAV network which employs the time division multiple access protocol. In both networks, our goal is to maximize the minimum rate among users through jointly optimizing the UAV's location/trajectory, transmit beamformer, and RIS coefficients. The resulting problems are highly nonconvex due to a strong coupling between the involved variables. We develop efficient algorithms based on block coordinate ascend and successive convex approximation to effectively solve these problems in an iterative manner. In particular, in the optimization of the mobile-UAV network, closed-form solutions to the transmit beamformer and RIS passive coefficients are derived. Numerical results show that a hybrid RIS equipped with only 4 active elements and a power budget of 0 dBm offers an improvement of 38%-63% in minimum rate, while that achieved by a passive RIS is only about 15%, with the same total number of elements. △ Less

Submitted 20 September, 2023; v1 submitted 24 June, 2023; originally announced June 2023.

Comments: This paper has been submitted to IEEE Transaction on Wireless Communications

Low-Complexity Multi-Antenna Coded Caching Using Location-Aware Placement Delivery Arrays

Authors: Hamidreza Bakhshzad Mahmoodi, MohammadJavad Salehi, Antti Tolli

Abstract: A location-aware multi-antenna coded caching scheme is proposed for applications with location-dependent data requests, such as wireless immersive experience, where users are immersed in a three-dimensional virtual world. The wireless connectivity conditions vary as the users move within the application area motivating the use of a non-uniform cache memory allocation process to avoid excessive del… ▽ More A location-aware multi-antenna coded caching scheme is proposed for applications with location-dependent data requests, such as wireless immersive experience, where users are immersed in a three-dimensional virtual world. The wireless connectivity conditions vary as the users move within the application area motivating the use of a non-uniform cache memory allocation process to avoid excessive delivery time for users located in wireless bottleneck areas. To this end, a location-aware placement and delivery array (LAPDA) is designed for cache-aided multiantenna data delivery with a fast converging, iterative linear beamforming process. The underlying weighted max-min transmit precoder design enables the proposed scheme to serve users in poor connectivity areas with smaller amounts of data while simultaneously delivering larger amounts to other users. Our new scheme is suitable for large networks due to its linear transceiver structure and it is not constrained by the number of users, cache size, or the number of antennas at the transmitter, unlike the existing schemes. Despite non-uniform cache placement, the proposed scheme still achieves a significant degree of coded caching gain that is additive to the multiplexing gain and greatly outperforms the conventional symmetric CC schemes in terms of both average and 95-percentile delivery time. △ Less

Submitted 9 July, 2023; v1 submitted 11 May, 2023; originally announced May 2023.

Comments: 13 pages and 8 figures

Multi-User Data Detection in Massive MIMO with 1-Bit ADCs

Authors: Amin Radbord, Italo Atzeni, Antti Tölli

Abstract: We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this pap… ▽ More We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this paper, we consider a multi-UE setting with correlated Rayleigh fading, where the soft-estimated symbols are obtained by means of maximum ratio combining based on imperfectly estimated channels. We derive a closed-form expression of the expected value of the soft-estimated symbols, which allows to understand the impact of the specific data symbols transmitted by the interfering UEs. Building on this result, we design efficient data detection strategies based on the minimum distance criterion, which are compared in terms of symbol error rate and complexity. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Comments: To be presented at IEEE ICASSP 2023

Pilot-Aided Distributed Multi-Group Multicast Precoding Design for Cell-Free Massive MIMO

Authors: Bikshapathi Gouda, Italo Atzeni, Antti Tölli

Abstract: We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the join… ▽ More We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the joint network-wide multi-group multicast precoders at the base stations (BSs) and the combiners at the user equipments (UEs) in a fully distributed fashion, we adopt an iterative bi-directional training scheme with UE-specific or group-specific precoded uplink pilots and group-specific precoded downlink pilots. To this end, we introduce a new group-specific uplink training resource that entirely eliminates the need for backhaul signaling for the channel state information (CSI) exchange. The precoders are optimized locally at each BS by means of either best-response or gradient-based updates, and the convergence of the two approaches is analyzed with respect to the centralized implementation with perfect CSI. Finally, numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI. △ Less

Submitted 31 January, 2024; v1 submitted 14 November, 2022; originally announced November 2022.

Comments: Submitted to TWC

MSC Class: 14J60 ACM Class: F.2.2; I.2.7

Distributed Precoding Design for Multi-Group Multicasting in Cell-Free Massive MIMO

Authors: Bikshapathi Gouda, Italo Atzeni, Antti Tölli

Abstract: We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-direct… ▽ More We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distributed fashion. An additional group-specific uplink training resource is introduced, which entirely eliminates the need for backhaul signaling for channel state information (CSI) exchange. We also propose a simpler distributed precoding design based solely on group-specific pilots, which can be useful in the case of scarce training resources. Numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: To be presented at GLOBECOM 2022, Dec. 2022

MSC Class: 14J60 ACM Class: F.2.2; I.2.7

Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements

Authors: Onel L. A. López, Dileep Kumar, Antti Tölli

Abstract: The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom… ▽ More The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors. △ Less

Submitted 15 January, 2023; v1 submitted 31 May, 2022; originally announced June 2022.

Comments: accepted at IEEE TCOM

A Variational Bayesian Perspective on Massive MIMO Detection

Authors: Duy H. N. Nguyen, Italo Atzeni, Antti Tölli, A. Lee Swindlehurst

Abstract: Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for mas… ▽ More Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for massive MIMO systems. We first examine the massive MIMO detection problem with perfect channel state information at the receiver (CSIR) and show that a conventional VB method with known noise variance yields poor detection performance. To address this limitation, we devise two new VB algorithms that use the noise variance and covariance matrix postulated by the algorithms themselves. We further develop the VB framework for massive MIMO detection with imperfect CSIR. Simulation results show that the proposed VB methods achieve significantly lower detection errors compared with existing schemes for a wide range of channel models. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Comments: 14 pages, submitted for publication

Hybrid Active-Passive Reconfigurable Intelligent Surface-Assisted Multi-User MISO Systems

Authors: Nhan Thanh Nguyen, Van-Dinh Nguyen, Qingqing Wu, Antti Tolli, Symeon Chatzinotas, Markku Juntti

Abstract: We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we m… ▽ More We consider a multi-user multiple-input single-output (MISO) communications system which is assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). Unlike conventional passive RISs, hybrid RIS is equipped with a few active elements with the ability to reflect and amplify incident signals to significantly improve the system performance. Towards a fairness-oriented design, we maximize the minimum rate among all users through jointly optimizing the transmit beamforming vectors and RIS reflecting/amplifying coefficients. Combining tools from block coordinate ascent and successive convex approximation, the challenging nonconvex problem is efficiently solved by a low-complexity iterative algorithm. The numerical results show that a hybrid RIS with 4 active elements out of a total of 50 elements with a power budget of -1 dBm offers an improvement of up to 80% to the considered system, while that achieved by a fully passive RIS is only 27%. △ Less

Submitted 18 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: This paper has been submitted to IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC) 2022

Asymmetric Coded Caching for Multi-Antenna Location-Dependent Content Delivery

Authors: Hamidreza Bakhshzad Mahmoodi, MohammadJavad Salehi, Antti Tölli

Abstract: Efficient usage of in-device storage and computation capabilities are key solutions to support data-intensive applications such as immersive digital experiences. This paper proposes a location-dependent multi-antenna coded caching -based content delivery scheme tailored specifically for wireless immersive viewing applications. First, a novel memory allocation process incentivizes the content relev… ▽ More Efficient usage of in-device storage and computation capabilities are key solutions to support data-intensive applications such as immersive digital experiences. This paper proposes a location-dependent multi-antenna coded caching -based content delivery scheme tailored specifically for wireless immersive viewing applications. First, a novel memory allocation process incentivizes the content relevant to the identified wireless bottleneck areas. This enables a trade-off between local and global caching gains and results in unequal fractions of location-dependent multimedia content cached by each user. Then, a novel packet generation process is carried out during the subsequent delivery phase, given the asymmetric cache placement. During this phase, the number of packets transmitted to each user is the same, while the sizes of the packets are proportional to the corresponding location-dependent cache ratios. In this regard, each user is served with location-specific content using joint multicast beamforming and a multi-rate modulation scheme that simultaneously benefits from global caching and spatial multiplexing gains. Numerical experiments and mathematical analysis demonstrate significant performance gains compared to the state-of-the-art. △ Less

Submitted 16 February, 2023; v1 submitted 27 January, 2022; originally announced January 2022.

Comments: 32 pages, 15 figures, journal paper. arXiv admin note: text overlap with arXiv:2102.02518

Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers

Authors: Dileep Kumar, Onel L. Alcaraz López, Satya Krishna Joshi, Antti Tölli

Abstract: Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T… ▽ More Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network. △ Less

Submitted 22 October, 2022; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: 34 pages, 12 figures

Low-Resolution Massive MIMO Under Hardware Power Consumption Constraints

Authors: Italo Atzeni, Antti Tölli, Giuseppe Durisi

Abstract: We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between the… ▽ More We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between these design parameters by using a realistic model for the power consumption of the ADCs/DACs and the radio frequency chains. Considering uplink pilot-aided channel estimation, we build on the Bussgang decomposition to derive tractable expressions for uplink and downlink ergodic achievable sum rates. Numerical results show that the ergodic performance is boosted when many BS antennas with very low resolution (i.e., 2 to 3 bits) are adopted in both the uplink and the downlink. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Comments: Presented at the Asilomar Conference on Signals, Systems, and Computers 2021, Nov. 2021

Joint Minimum DL-UL Rate Maximization for Cell-Free Massive MIMO

Authors: Bikshapathi Gouda, Italo Atzeni, Antti Tölli

Abstract: In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short sch… ▽ More In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short scheduling blocks. This paper proposes a framework to reduce the bi-directional training overhead by considering a common beamforming training strategy for both DL and UL when the UEs to be served in the two directions are the same. In doing so, we consider the problem of maximizing the (weighted) minimum DL-UL rate among all the UEs. Numerical results show that, in scenarios with short scheduling blocks, the proposed framework outperforms the case where the DL and UL beamforming strategies are computed individually via two separate bi-directional training phases thanks to the reduced training overhead. Even more substantial gains are observed with respect to the case with a single bi-directional training phase, where the DL (resp. UL) beamforming strategies are reused in the UL (resp. DL). △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 6 pages

MSC Class: G.1.6 ACM Class: G.1.6

Latency-Constrained Highly-Reliable mmWave Communication via Multi-point Connectivity

Authors: Dileep Kumar, Satya Joshi, Antti Tölli

Abstract: The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user… ▽ More The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stochastic problem into a sequence of deterministic subproblems. A robust beamformer design is then proposed by exploiting the queue backlogs and channel information, that efficiently allocates the required radio and cooperation resources, and proactively leverages the multi-antenna spatial diversity according to the instantaneous needs of the users. Further, to adapt to the uncertainties of the mmWave channel, we consider a pessimistic estimate of the rates over link blockage combinations and an adaptive selection of the CoMP serving set from the available remote radio units (RRUs). Moreover, after the relaxation of coupled and non-convex constraints via the Fractional Program (FP) techniques, a low-complexity closed-form iterative algorithm is provided by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. The simulation results manifest that, in the presence of random blockages, the proposed methods outperform the baseline scenarios and provide power-efficient, high-reliable, and low-latency mmWave communication. △ Less

Submitted 20 August, 2021; originally announced August 2021.

Comments: 12 pages, 10 figures

Uplink Data Detection Analysis of 1-Bit Quantized Massive MIMO

Authors: Italo Atzeni, Antti Tölli

Abstract: This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic be… ▽ More This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic behavior at high signal-to-noise ratio (SNR). These results are exploited to enhance the performance of maximum likelihood detection by taking into account the dispersion of the estimated symbols about their expected values. The symbol error rate with 1-bit ADCs is evaluated with respect to the number of BS antennas, the SNR, and the pilot length used for the channel estimation. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right SNR considerably improves the data detection accuracy. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Comments: To be presented at IEEE SPAWC 2021, Sep. 2021. arXiv admin note: substantial text overlap with arXiv:2102.10172

Channel Estimation and Data Detection Analysis of Massive MIMO with 1-Bit ADCs

Authors: Italo Atzeni, Antti Tölli

Abstract: We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scal… ▽ More We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scaled least-squares estimators. For the data detection, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted, which can be exploited to efficiently implement minimum distance detection and, potentially, to design the set of transmit symbols. Our analytical findings explicitly depend on key system parameters such as the signal-to-noise ratio (SNR), the number of user equipments, and the pilot length, thus enabling a precise characterization of the performance of the channel estimation and the data detection with 1-bit ADCs. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right noise level significantly enhances the system performance. △ Less

Submitted 16 November, 2021; v1 submitted 19 February, 2021; originally announced February 2021.

Comments: IEEE Transactions on Wireless Communications

Hybrid Beamforming for mm-Wave Massive MIMO Systems with Partially Connected RF Architecture

Authors: Mohammad Majidzadeh, Jarkko Kaleva, Nuutti Tervo, Harri Pennanen, Antti Tolli, Matti Latva-aho

Abstract: To satisfy the capacity requirements of future mobile systems, under-utilized millimeter wave frequencies can be efficiently exploited by employing massive MIMO technology with highly directive beamforming. Hybrid analog-digital beamforming has been recognised as a promising approach for large-scale MIMO implementations with a reduced number of costly and power-hungry RF chains. In comparison to f… ▽ More To satisfy the capacity requirements of future mobile systems, under-utilized millimeter wave frequencies can be efficiently exploited by employing massive MIMO technology with highly directive beamforming. Hybrid analog-digital beamforming has been recognised as a promising approach for large-scale MIMO implementations with a reduced number of costly and power-hungry RF chains. In comparison to fully connected architecture, hybrid beamforming (HBF) with partially connected RF architecture is particularly appealing for the practical implementation due to less complex RF power division and combining networks. In this paper, we first formulate single- and multi-user rate maximization problems as weighted minimum mean square error (WMMSE) and derive solutions for hybrid beamformers using alternating optimization. The algorithms are designed for the full-array- and sub-array-based processing strategies of partially connected HBF architecture. In addition to the rate maximizing WMMSE solutions, we propose lower complexity sub-array-based zero-forcing algorithms. The performance of the proposed algorithms is evaluated in two different channel models, i.e., a simple geometric model and a realistic statistical millimeter wave model known as NYUSIM. The performance results of the WMMSE HBF algorithms are meant to reveal the potential of partially connected HBF and serve as upper bounds for lower complexity methods. Numerical results imply that properly designed partially connected HBF has the potential to provide an good compromise between hardware complexity and system performance in comparison to fully digital beamforming. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 13 pages

D2D Assisted Multi-antenna Coded Caching

Authors: Hamidreza Bakhshzad Mahmoodi, Jarkko Kaleva, Seyed Pooya Shariatpanahi, Antti Tolli

Abstract: A device-to-device (D2D) aided multi-antenna coded caching scheme is proposed to improve the average delivery rate and reduce the downlink (DL) beamforming complexity.} Novel beamforming and resource allocation schemes are proposed where local data exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and DL transmission. In the D2D phase,… ▽ More A device-to-device (D2D) aided multi-antenna coded caching scheme is proposed to improve the average delivery rate and reduce the downlink (DL) beamforming complexity.} Novel beamforming and resource allocation schemes are proposed where local data exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and DL transmission. In the D2D phase, subsets of users are selected to share content with the adjacent users directly. {In this regard, a low complexity D2D mode selection algorithm is proposed to find the appropriate set of users for the D2D phase with comparable performance to the optimal exhaustive search. {During} the DL phase, the base station multicasts the remaining data requested by all the users. We identify scenarios and conditions where D2D transmission can reduce the delivery time. Furthermore, we demonstrate how} adding the new D2D phase to the DL-only scenario can significantly reduce the beamformer design complexity in the DL phase. The results further highlight that by partly delivering requested data in the D2D phase, the transmission rate can be boosted due to more efficient use of resources during the subsequent DL phase. As a result, the overall content delivery performance is greatly enhanced, especially in the finite signal-to-noise (SNR) regime. △ Less

Submitted 1 February, 2023; v1 submitted 9 October, 2020; originally announced October 2020.

Comments: 16 pages, 12 figures, published partly in two conferences and one journal. arXiv admin note: text overlap with arXiv:1905.05446

Scoring the Terabit/s Goal:Broadband Connectivity in 6G

Authors: Nandana Rajatheva, Italo Atzeni, Simon Bicais, Emil Bjornson, Andre Bourdoux, Stefano Buzzi, Carmen D'Andrea, Jean-Baptiste Dore, Serhat Erkucuk, Manuel Fuentes, Ke Guan, Yuzhou Hu, Xiao**g Huang, Jari Hulkkonen, Josep Miquel Jornet, Marcos Katz, Behrooz Makki, Rickard Nilsson, Erdal Panayirci, Khaled Rabie, Nuwanthika Rajapaksha, MohammadJavad Salehi, Hadi Sarieddeen, Shahriar Shahabuddin, Tommy Svensson , et al. (4 additional authors not shown)

Abstract: This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we conside… ▽ More This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity. △ Less

Submitted 21 February, 2021; v1 submitted 17 August, 2020; originally announced August 2020.

Comments: Submitted to IEEE Access. 51 pages,31 figures. arXiv admin note: text overlap with arXiv:2004.14247

White Paper on Broadband Connectivity in 6G

Authors: Nandana Rajatheva, Italo Atzeni, Emil Bjornson, Andre Bourdoux, Stefano Buzzi, Jean-Baptiste Dore, Serhat Erkucuk, Manuel Fuentes, Ke Guan, Yuzhou Hu, Xiao**g Huang, Jari Hulkkonen, Josep Miquel Jornet, Marcos Katz, Rickard Nilsson, Erdal Panayirci, Khaled Rabie, Nuwanthika Rajapaksha, MohammadJavad Salehi, Hadi Sarieddeen, Tommy Svensson, Oskari Tervo, Antti Tolli, Qingqing Wu, Wen Xu

Abstract: This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks wil… ▽ More This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 46 pages, 13 figures

Distributed Precoding Design via Over-the-Air Signaling for Cell-Free Massive MIMO

Authors: Italo Atzeni, Bikshapathi Gouda, Antti Tölli

Abstract: Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative preco… ▽ More Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative precoding design in cell-free massive MIMO (and, more generally, in joint transmission coordinated multi-point) systems that entirely eliminates the need for backhaul signaling for CSI exchange. A novel over-the-air (OTA) signaling mechanism is introduced such that each BS can obtain the same cross-term information that is traditionally exchanged among the BSs via backhaul signaling. The proposed distributed precoding design enjoys desirable flexibility and scalability properties, as the amount of OTA signaling does not scale with the number of BSs or user equipments. Numerical results show fast convergence and remarkable performance gains as compared with non-cooperative precoding design. The proposed scheme can also outperform the centralized precoding design under realistic CSI acquisition. △ Less

Submitted 13 October, 2020; v1 submitted 1 April, 2020; originally announced April 2020.

Comments: Submitted to the IEEE for possible publication

Two-stage Beamformer Design via Deterministic Equivalents

Authors: Hossein Asgharimoghaddam, Antti Tölli

Abstract: Complexity reduction of optimal linear receiver is considered in a scenario where both the number of single-antenna user equipments (UEs) $K$ and base station (BS) antennas $N$ are large. Two-stage beamforming (TSB) greatly alleviates the high implementation complexity of large scale multiantenna receiver by concatenating a statistical outer beamformer (OBF) with an instantaneous inner beamformer… ▽ More Complexity reduction of optimal linear receiver is considered in a scenario where both the number of single-antenna user equipments (UEs) $K$ and base station (BS) antennas $N$ are large. Two-stage beamforming (TSB) greatly alleviates the high implementation complexity of large scale multiantenna receiver by concatenating a statistical outer beamformer (OBF) with an instantaneous inner beamformer (IBF) design. Using asymptotic large system analysis, we propose a novel TSB method that adjusts the dimensions of user-specific OBF matrices based on the projection of the optimal minimum mean square error (MMSE) vectors into the beam domain. The beam domain is first divided into $S$ narrow sectors such that each sector contains $D$ DFT beams. Then, so-called deterministic equivalents are computed for the amplitude-projection of the optimal MMSE vectors into each sector in asymptotic regime where $N$ , $K$ and $D$ grow large with a non-trivial ratio $N/K = C$ and $N/D = S$. Given the approximations for the sector-specific values, the structure and dimension of each UE specific OBF vector are optimized based on the statistical channel properties and the amount of overlap among users in angular domain. The numerical analysis shows that the attained SINR values closely follow the optimal MMSE receiver while the computational burden is greatly reduced. △ Less

Submitted 2 December, 2019; originally announced December 2019.

Comments: 5 pages

Capacity Approaching Low Density Spreading in Uplink NOMA via Asymptotic Analysis

Authors: Hossein Asgharimoghaddam, Jarkko Kaleva, Antti Tölli

Abstract: Low-density spreading non-orthogonal multiple-access (LDS-NOMA) is considered where $K$ single-antenna user-equipments (UEs) communicate with a base-station (BS) over $F$ fading sub-carriers. Each UE $k$ spreads its data symbols over $d_k<F$ sub-carriers. We aim to identify the LDS-code allocations that maximize the ergodic mutual information (EMI). The BS assigns resources solely based on pathlos… ▽ More Low-density spreading non-orthogonal multiple-access (LDS-NOMA) is considered where $K$ single-antenna user-equipments (UEs) communicate with a base-station (BS) over $F$ fading sub-carriers. Each UE $k$ spreads its data symbols over $d_k<F$ sub-carriers. We aim to identify the LDS-code allocations that maximize the ergodic mutual information (EMI). The BS assigns resources solely based on pathlosses. Conducting analysis in the regime where $F$, $K$, and ${d_k,\forall k}$ converge to $+\infty$ at the same rate, we present EMI as a deterministic equivalent plus a residual term. The deterministic equivalent is a function of pathlosses and spreading codes, and the small residual term scales as $\mathcal{O}(\frac{1}{\min(d_k^2)})$. We formulate an optimization problem to get the set of all spreading codes, irrespective of sparsity constraints, which maximize the deterministic EMI. This yields a simple resource allocation rule that facilitates the construction of desired LDS-codes via an efficient partitioning algorithm. The acquired LDS-codes additionally harness the small incremental gain inherent in the residual term, and thus, attain near-optimal values of EMI in the finite regime. While regular LDS-NOMA is found to be asymptotically optimal in symmetric models, an irregular spreading arises in generic asymmetric cases. The spectral efficiency enhancement relative to regular and random spreading is validated numerically. △ Less

Submitted 23 June, 2020; v1 submitted 26 November, 2019; originally announced November 2019.

Comments: 29 Pages, New references are added. Section III and IV are revised for better presentation, the final results unchanged. Additional numerical results are included

Blockage-aware Reliable mmWave Access via Coordinated Multi-point Connectivity

Authors: Dileep Kumar, Jarkko Kaleva, Antti Tölli

Abstract: The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication… ▽ More The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication reliability by exploiting the spatial macro-diversity and a pessimistic estimate of rates over potential link blockage combinations. Specifically, we provide a blockage-aware algorithm for the weighted sum-rate maximization (WSRM) problem with parallel beamformer processing across distributed remote radio units (RRUs). Combinations of non-convex and coupled constraints are handled via successive convex approximation (SCA) framework, which admits a closed-form solution for each SCA step, by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. Unlike the conventional coordinated multi-point (CoMP) schemes, the proposed blockage-aware beamformer design has, per-iteration, computational complexity in the order of RRU antennas instead of system-wide joint transmit antennas. This leads to a practical and computationally efficient implementation that is scalable to any arbitrary multi-point configuration. In the presence of random blockages, the proposed schemes are shown to significantly outperform baseline scenarios and result in reliable mmWave communication. △ Less

Submitted 13 February, 2021; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 15 pages, 10 figures

Message passing-based link configuration in short range millimeter wave systems

Authors: Nitin Jonathan Myers, Jarkko Kaleva, Antti Tölli, Robert W. Heath Jr

Abstract: Millimeter wave (mmWave) communication in typical wearable and data center settings is short range. As the distance between the transmitter and the receiver in short range scenarios can be comparable to the length of the antenna arrays, the common far field approximation for the channel may not be applicable. As a result, dictionaries that result in a sparse channel representation in the far field… ▽ More Millimeter wave (mmWave) communication in typical wearable and data center settings is short range. As the distance between the transmitter and the receiver in short range scenarios can be comparable to the length of the antenna arrays, the common far field approximation for the channel may not be applicable. As a result, dictionaries that result in a sparse channel representation in the far field setting may not be appropriate for short distances. In this paper, we develop a novel framework to exploit the structure in short range mmWave channels. The proposed method splits the channel into several subchannels for which the far field approximation can be applied. Then, the structure within and across different subchannels is leveraged using message passing. We show how information about the antenna array geometry can be used to design message passing factors that incorporate structure across successive subchannels. Simulation results indicate that our framework can be used to achieve better beam alignment with fewer channel measurements when compared to standard compressed sensing-based techniques that do not exploit structure across subchannels. △ Less

Submitted 11 July, 2019; originally announced July 2019.

Comments: submitted to IEEE Transactions on Communications

A Geometry-aided Message Passing Method for AoA-Based Short Range MIMO Channel Estimation

Authors: Jarkko Kaleva, Nitin Jonathan Myers, Antti Tölli, Robert W. Heath Jr

Abstract: Short range channels commonly arise in millimeter wave (mmWave) wearable settings, where the length of the antenna arrays can be comparable to the distance between the radios. Conventional mmWave MIMO channel estimation techniques based on the far field assumption may perform poorly in short range settings due to the large angular spread and, hence, high available rank. We propose a geometry-aided… ▽ More Short range channels commonly arise in millimeter wave (mmWave) wearable settings, where the length of the antenna arrays can be comparable to the distance between the radios. Conventional mmWave MIMO channel estimation techniques based on the far field assumption may perform poorly in short range settings due to the large angular spread and, hence, high available rank. We propose a geometry-aided message passing algorithm that exploits structure in short range line-of-sight (LoS) channels for spatial sub-Nyquist channel estimation. Our approach parametrizes the channel using angle-of-arrivals (AoAs) that are locally defined for subarrays of an antenna array. Furthermore, it leverages the dependencies between the local AoAs using factors based on the array geometry. We show that the LoS MIMO channel can be reconstructed using the derived local AoA estimates and the known transceiver geometry. The proposed approach achieves a reasonable rate with greatly reduced pilot transmissions when compared to exhaustive beam search-based local AoA estimation. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Comments: To appear in the proceedings of the 20th IEEE International Workshop on Signal Processing Advances in Wireless Communications

Decentralizing Multicell Beamforming via Deterministic Equivalents

Authors: Hossein Asgharimoghaddam, Antti Tölli, Luca Sanguinetti, Merouane Debbah

Abstract: This paper focuses on develo** a decentralized framework for coordinated minimum power beamforming wherein $L$ base stations (BSs), each equipped with $N$ antennas, serve $K$ single-antenna users with specific rate constraints. This is realized by considering user specific intercell interference (ICI) strength as the principal coupling parameter among BSs. First, explicit deterministic expressio… ▽ More This paper focuses on develo** a decentralized framework for coordinated minimum power beamforming wherein $L$ base stations (BSs), each equipped with $N$ antennas, serve $K$ single-antenna users with specific rate constraints. This is realized by considering user specific intercell interference (ICI) strength as the principal coupling parameter among BSs. First, explicit deterministic expressions for transmit powers are derived for spatially correlated channels in the asymptotic regime in which $N$ and $K$ grow large with a non-trivial ratio $K/N$. These asymptotic expressions are then used to compute approximations of the optimal ICI values that depend only on the channel statistics. By relying on the approximate ICI values as coordination parameters, a distributed non-iterative coordination algorithm, suitable for large networks with limited backhaul, is proposed. A heuristic algorithm is also proposed relaxing coordination requirements even further as it only needs pathloss values for non-local channels. The proposed algorithms satisfy the target rates for all users even when $N$ and $K$ are relatively small. Finally, the potential benefits of grou** users with similar statistics are investigated to further reduce the overhead and computational effort of the proposed solutions. Simulation results show that the proposed methods yield near-optimal performance. △ Less

Submitted 26 November, 2018; originally announced November 2018.

Comments: IEEE Transactions on Communications

Benefits of Positioning-Aided Communication Technology in High-Frequency Industrial IoT

Authors: Mike Koivisto, Olga Galinina, Sergey Andreev, Antti Tölli, Giuseppe Destino, Mário Costa, Kari Leppänen, Yevgeni Koucheryavy, Mikko Valkama

Abstract: The future of industrial applications is shaped by intelligent moving IoT devices, such as flying drones, advanced factory robots, and connected vehicles, which may operate (semi-)autonomously. In these challenging scenarios, dynamic radio connectivity at high frequencies -- augmented with timely positioning-related information -- becomes instrumental to improve communication performance and facil… ▽ More The future of industrial applications is shaped by intelligent moving IoT devices, such as flying drones, advanced factory robots, and connected vehicles, which may operate (semi-)autonomously. In these challenging scenarios, dynamic radio connectivity at high frequencies -- augmented with timely positioning-related information -- becomes instrumental to improve communication performance and facilitate efficient computation offloading. Our work reviews the main research challenges and reveals open implementation gaps in Industrial IoT (IIoT) applications that rely on location awareness and multi-connectivity in super high and extremely high frequency bands. It further conducts a rigorous numerical investigation to confirm the potential of precise device localization in the emerging IIoT systems. We focus on positioning-aided benefits made available to multi-connectivity IIoT device operation at 28 GHz, which notably improve data transfer rates, communication latency, and extent of control overhead. △ Less

Submitted 10 September, 2018; originally announced September 2018.

Comments: 7 pages, 5 figures, 1 table. This work has been submitted to the IEEE for possible publication