-
Distributed MIMO Networks with Rotary ULAs for Indoor Scenarios under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) netwo…
▽ More
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) networks. One of the main novelties is adopting Distributed Multiple-Input Multiple-Output (D-MIMO) networks. However, most works studying D-MIMO consider antenna arrays with no movement capabilities, even though some recent works have shown that this could bring substantial performance improvements. In this work, we propose the utilization of Access Points (APs) equipped with Rotary Uniform Linear Arrays (RULAs) for this purpose. Considering a spatially correlated Rician fading model, the optimal angular position of the RULAs is jointly computed by the central processing unit using particle swarm optimization as a function of the position of the active devices. Considering the impact of imperfect positioning estimates, our numerical results show that the RULAs's optimal rotation brings substantial performance gains in terms of mean per-user spectral efficiency. The improvement grows with the strength of the line-of-sight components of the channel vectors. Given the total number of antenna elements, we study the trade-off between the number of APs and the number of antenna elements per AP, revealing an optimal number of APs for the cases of APs equipped with static ULAs and RULAs.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Integrated Communication, Localization, and Sensing in 6G D-MIMO Networks
Authors:
Hao Guo,
Henk Wymeersch,
Behrooz Makki,
Hui Chen,
Yibo Wu,
Giuseppe Durisi,
Musa Furkan Keskin,
Mohammad H. Moghaddam,
Charitha Madapatha,
Han Yu,
Peter Hammarberg,
Hyowon Kim,
Tommy Svensson
Abstract:
Future generations of mobile networks call for concurrent sensing and communication functionalities in the same hardware and/or spectrum. Compared to communication, sensing services often suffer from limited coverage, due to the high path loss of the reflected signal and the increased infrastructure requirements. To provide a more uniform quality of service, distributed multiple input multiple out…
▽ More
Future generations of mobile networks call for concurrent sensing and communication functionalities in the same hardware and/or spectrum. Compared to communication, sensing services often suffer from limited coverage, due to the high path loss of the reflected signal and the increased infrastructure requirements. To provide a more uniform quality of service, distributed multiple input multiple output (D-MIMO) systems deploy a large number of distributed nodes and efficiently control them, making distributed integrated sensing and communications (ISAC) possible. In this paper, we investigate ISAC in D-MIMO through the lens of different design architectures and deployments, revealing both conflicts and synergies. In addition, simulation and demonstration results reveal both opportunities and challenges towards the implementation of ISAC in D-MIMO.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained…
▽ More
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates.
△ Less
Submitted 25 June, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
Full-Duplex Millimeter Wave MIMO Channel Estimation: A Neural Network Approach
Authors:
Mehdi Sattari,
Hao Guo,
Deniz Gündüz,
Ashkan Panahi,
Tommy Svensson
Abstract:
Millimeter wave (mmWave) multiple-input-multi-output (MIMO) is now a reality with great potential for further improvement. We study full-duplex transmissions as an effective way to improve mmWave MIMO systems. Compared to half-duplex systems, full-duplex transmissions may offer higher data rates and lower latency. However, full-duplex transmission is hindered by self-interference (SI) at the recei…
▽ More
Millimeter wave (mmWave) multiple-input-multi-output (MIMO) is now a reality with great potential for further improvement. We study full-duplex transmissions as an effective way to improve mmWave MIMO systems. Compared to half-duplex systems, full-duplex transmissions may offer higher data rates and lower latency. However, full-duplex transmission is hindered by self-interference (SI) at the receive antennas, and SI channel estimation becomes a crucial step to make the full-duplex systems feasible. In this paper, we address the problem of channel estimation in full-duplex mmWave MIMO systems using neural networks (NNs). Our approach involves sharing pilot resources between user equipments (UEs) and transmit antennas at the base station (BS), aiming to reduce the pilot overhead in full-duplex systems and to achieve a comparable level to that of a half-duplex system. Additionally, in the case of separate antenna configurations in a full-duplex BS, providing channel estimates of transmit antenna (TX) arrays to the downlink UEs poses another challenge, as the TX arrays are not capable of receiving pilot signals. To address this, we employ an NN to map the channel from the downlink UEs to the receive antenna (RX) arrays to the channel from the TX arrays to the downlink UEs. We further elaborate on how NNs perform the estimation with different architectures, (e.g., different numbers of hidden layers), the introduction of non-linear distortion (e.g., with a 1-bit analog-to-digital converter (ADC)), and different channel conditions (e.g., low-correlated and high-correlated channels). Our work provides novel insights into NN-based channel estimators.
△ Less
Submitted 18 June, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Near-Far Field Channel Modeling for Holographic MIMO Using Expectation-Maximization Methods
Authors:
Houfeng Chen,
Shuhao Zeng,
Hao Guo,
Tommy Svensson,
Hongliang Zhang
Abstract:
Holographic Multiple-Input Multiple-Output (HMIMO), which densely integrates numerous antennas into a limited space, is anticipated to provide higher rates for future 6G wireless communications. The increase in antenna aperture size makes the near-field region enlarge, causing some users to be located in the near-field region. Thus, we are facing a hybrid near-field and far-field communication pro…
▽ More
Holographic Multiple-Input Multiple-Output (HMIMO), which densely integrates numerous antennas into a limited space, is anticipated to provide higher rates for future 6G wireless communications. The increase in antenna aperture size makes the near-field region enlarge, causing some users to be located in the near-field region. Thus, we are facing a hybrid near-field and far-field communication problem, where conventional far-field modeling methods may not work well. In this paper, we propose a near-far field channel model that does not presuppose whether each path is near-field or far-field, different from the existing work requiring the ratio of the number of near-field paths to that of far-field paths as prior knowledge. However, this gives rise to a new challenge for accurately modeling the channel, as conventional methods of obtaining channel model parameters are not applicable to this model. Therefore, we propose a new method, Expectation-Maximization (EM)-based Near-Far Field Channel Modeling, to obtain channel model parameters, which considers whether each path is near-field or far-field as a hidden variable, and optimizes the hidden variables and channel model parameters through an alternating iteration method. Simulation results show that our method is superior to conventional near-field and far-field algorithms in fitting the near-far field channel in terms of outage probability.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
6G Positioning and Sensing Through the Lens of Sustainability, Inclusiveness, and Trustworthiness
Authors:
Henk Wymeersch,
Hui Chen,
Hao Guo,
Musa Furkan Keskin,
Bahare M. Khorsandi,
Mohammad H. Moghaddam,
Alejandro Ramirez,
Kim Schindhelm,
Athanasios Stavridis,
Tommy Svensson,
Vijaya Yajnanarayana
Abstract:
6G promises a paradigm shift in which positioning and sensing are inherently integrated, enhancing not only the communication performance but also enabling location- and context-aware services. Historically, positioning and sensing have been viewed through the lens of cost and performance trade-offs, implying an escalated demand for resources, such as radio, physical, and computational resources,…
▽ More
6G promises a paradigm shift in which positioning and sensing are inherently integrated, enhancing not only the communication performance but also enabling location- and context-aware services. Historically, positioning and sensing have been viewed through the lens of cost and performance trade-offs, implying an escalated demand for resources, such as radio, physical, and computational resources, for improved performance. However, 6G goes beyond this traditional perspective to encompass a set of broader values, namely sustainability, inclusiveness, and trustworthiness. From a joint industrial/academic perspective, this paper aims to shed light on these important value indicators and their relationship with the conventional key performance indicators in the context of positioning and sensing.
△ Less
Submitted 14 February, 2024; v1 submitted 24 September, 2023;
originally announced September 2023.
-
Beamforming in Wireless Coded-Caching Systems
Authors:
Sneha Madhusudan,
Charitha Madapatha,
Behrooz Makki,
Hao Guo,
Tommy Svensson
Abstract:
Increased capacity in the access network poses capacity challenges on the transport network due to the aggregated traffic. However, there are spatial and time correlation in the user data demands that could potentially be utilized. To that end, we investigate a wireless transport network architecture that integrates beamforming and coded-caching strategies. Especially, our proposed design entails…
▽ More
Increased capacity in the access network poses capacity challenges on the transport network due to the aggregated traffic. However, there are spatial and time correlation in the user data demands that could potentially be utilized. To that end, we investigate a wireless transport network architecture that integrates beamforming and coded-caching strategies. Especially, our proposed design entails a server with multiple antennas that broadcasts content to cache nodes responsible for serving users. Traditional caching methods face the limitation of relying on the individual memory with additional overhead. Hence, we develop an efficient genetic algorithm-based scheme for beam optimization in the coded-caching system. By exploiting the advantages of beamforming and coded-caching, the architecture achieves gains in terms of multicast opportunities, interference mitigation, and reduced peak backhaul traffic. A comparative analysis of this joint design with traditional, un-coded caching schemes is also conducted to assess the benefits of the proposed approach. Additionally, we examine the impact of various buffering and decoding methods on the performance of the coded-caching scheme. Our findings suggest that proper beamforming is useful in enhancing the effectiveness of the coded-caching technique, resulting in significant reduction in peak backhaul traffic.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Waveforms for sub-THz 6G: Design Guidelines
Authors:
Muris Sarajlić,
Nuutti Tervo,
Aarno Pärssinen,
Le Hang Nguyen,
Hardy Halbauer,
Kilian Roth,
Vaidyanathan Kumar,
Tommy Svensson,
Ahmad Nimr,
Stephan Zeitz,
Meik Dör**haus,
Gerhard Fettweis
Abstract:
The projected sub-THz (100 - 300 GHz) part of the upcoming 6G standard will require a careful design of the waveform and choice of slot structure. Not only that the design of the physical layer for 6G will be driven by ambitious system performance requirements, but also hardware limitations, specific to sub-THz frequencies, pose a fundamental design constraint for the waveform. In this contributio…
▽ More
The projected sub-THz (100 - 300 GHz) part of the upcoming 6G standard will require a careful design of the waveform and choice of slot structure. Not only that the design of the physical layer for 6G will be driven by ambitious system performance requirements, but also hardware limitations, specific to sub-THz frequencies, pose a fundamental design constraint for the waveform. In this contribution, general guidelines for the waveform design are given, together with a non-exhaustive list of exemplary waveforms that can be used to meet the design requirements.
△ Less
Submitted 17 July, 2023; v1 submitted 15 June, 2023;
originally announced June 2023.
-
RIS-Assisted Interference Mitigation for Uplink NOMA
Authors:
Azadeh Tabeshnezhad,
A. Lee Swindlehurst,
Tommy Svensson
Abstract:
Non-orthogonal multiple access (NOMA) has become a promising technology for next-generation wireless communications systems due to its capability to provide access for multiple users on the same resource. In this paper, we consider an uplink power-domain NOMA system aided by a reconfigurable intelligent surface (RIS) in the presence of a jammer that aims to maximize its interference on the base st…
▽ More
Non-orthogonal multiple access (NOMA) has become a promising technology for next-generation wireless communications systems due to its capability to provide access for multiple users on the same resource. In this paper, we consider an uplink power-domain NOMA system aided by a reconfigurable intelligent surface (RIS) in the presence of a jammer that aims to maximize its interference on the base station (BS) uplink receiver. We consider two kinds of RISs, a regular RIS whose elements can only change the phase of the incoming wave, and an RIS whose elements can also attenuate the incoming wave. Our aim is to minimize the total power transmitted by the user terminals under quality-of-service constraints by controlling both the propagation from the users and the jammer to the BS with help of the RIS. The resulting objective function and constraints are both non-linear and non-convex, so we address this problem using numerical optimization. Our numerical results show that the RIS can help to dramatically reduce the per user required transmit power in an interference-limited scenario.
△ Less
Submitted 31 January, 2023;
originally announced January 2023.
-
A Comparison between Network-Controlled Repeaters and Reconfigurable Intelligent Surfaces
Authors:
Hao Guo,
Charitha Madapatha,
Behrooz Makki,
Boris Dortschy,
Lei Bao,
Magnus Åström,
Tommy Svensson
Abstract:
Network-controlled repeater (NCR) has been recently considered as a study-item in 3GPP Release 18, and the discussions are continuing in a work-item. In this paper, we introduce the concept of NCRs, as a possible low-complexity device to support for network densification and compare the performance of the NCRs with those achieved by reconfigurable intelligent surfaces (RISs). The results are prese…
▽ More
Network-controlled repeater (NCR) has been recently considered as a study-item in 3GPP Release 18, and the discussions are continuing in a work-item. In this paper, we introduce the concept of NCRs, as a possible low-complexity device to support for network densification and compare the performance of the NCRs with those achieved by reconfigurable intelligent surfaces (RISs). The results are presented for the cases with different beamforming methods and hardware impairment models of the RIS. Moreover, we introduce the objectives of the 3GPP Release 18 NCR work-item and study the effect of different parameters on the performance of NCR-assisted networks. As we show, with a proper deployment, the presence of NCRs/RISs can improve the network performance considerably.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Positioning and Sensing in 6G: Gaps, Challenges, and Opportunities
Authors:
Ali Behravan,
Vijaya Yajnanarayana,
Musa Furkan Keskin,
Hui Chen,
Deep Shrestha,
Traian E. Abrudan,
Tommy Svensson,
Kim Schindhelm,
Andreas Wolfgang,
Simon Lindberg,
Henk Wymeersch
Abstract:
Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain i…
▽ More
Among the key differentiators of 6G compared to 5G will be the increased emphasis on radio based positioning and sensing. These will be utilized not only for conventional location-aware services and for enhancing communication performance, but also to support new use case families with extreme performance requirements. This paper presents a unified vision from stakeholders across the value chain in terms of both opportunities and challenges for 6G positioning and sensing, as well as use cases, performance requirements, and gap analysis. Combined, this motivates the technical advances in 6G and guides system design.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Integrated Access and Backhaul in Cell-free Massive MIMO Systems
Authors:
Ali Hosseinalipour Jazi,
S. Mohammad Razavizadeh,
Tommy Svensson
Abstract:
One of the major challenges with cell-free (CF) massive multiple-input multiple-output (MIMO) networks is providing backhaul links for a large number of distributed access points (APs). In general, providing fiber optics backhaul for these APs is not cost-effective and also reduces network scalability. Wireless backhauling can be a promising solution that can be integrated with wireless access lin…
▽ More
One of the major challenges with cell-free (CF) massive multiple-input multiple-output (MIMO) networks is providing backhaul links for a large number of distributed access points (APs). In general, providing fiber optics backhaul for these APs is not cost-effective and also reduces network scalability. Wireless backhauling can be a promising solution that can be integrated with wireless access links to increase spectrum efficiency. In this paper, the application of integrated access and backhaul (IAB) technique in millimeter-wave (mmWave) CF massive MIMO systems is investigated. The access and backhaul links share a frequency spectrum in the mmWave bands, and in both, hybrid beamforming techniques are adopted for signal transmission. The bandwidth allocation (division) parameter between the two link types as well as the beamforming matrices are optimized to maximize the end-to-end data-rate. This leads to a non-convex optimization problem for which an efficient solution method is proposed. The simulation results show the effectiveness of the IAB technique and our proposed scheme in CF massive MIMO systems. These simulations also compare the proposed hybrid beamforming method with a fully digital solution in terms of the number of radio frequency (RF) chains and the volume of backhaul traffic. Finally, the effect of increasing the number of APs on the users data rates in terms of wireless access and backhaul links constraints is also examined.
△ Less
Submitted 23 October, 2022;
originally announced October 2022.
-
Electromagnetic Field Exposure Avoidance thanks to Non-Intended User Equipment and RIS
Authors:
Hao Guo,
Dinh-Thuy Phan-Huy,
Tommy Svensson
Abstract:
On the one hand, there is a growing demand for high throughput which can be satisfied thanks to the deployment of new networks using massive multiple-input multiple-output (MIMO) and beamforming. On the other hand, in some countries or cities, there is a demand for arbitrarily low electromagnetic field exposure (EMFE) of people not concerned by the ongoing communication, which slows down the deplo…
▽ More
On the one hand, there is a growing demand for high throughput which can be satisfied thanks to the deployment of new networks using massive multiple-input multiple-output (MIMO) and beamforming. On the other hand, in some countries or cities, there is a demand for arbitrarily low electromagnetic field exposure (EMFE) of people not concerned by the ongoing communication, which slows down the deployment of new networks. Recently, it has been proposed to take the opportunity, when designing the future 6th generation (6G), to offer, in addition to higher throughput, a new type of service: arbitrarily low EMFE. Recent works have shown that a reconfigurable intelligent surface (RIS), jointly optimized with the base station (BS) beamforming can improve the received throughput at the desired location whilst reducing EMFE everywhere. In this paper, we introduce a new concept of a non-intended user (NIU). An NIU is a user of the network who requests low EMFE when he/she is not downloading/uploading data. An NIU lets his/her device, called NIU equipment (NIUE), exchange some control signaling and pilots with the network, to help the network avoid exposing NIU to waves that are transporting data for another user of the network: the intended user (IU), whose device is called IU equipment (IUE). Specifically, we propose several new schemes to maximize the IU throughput under an EMFE constraint at the NIU (in practice, an interference constraint at the NIUE). Several propagation scenarios are investigated. Analytical and numerical results show that proper power allocation and beam optimization can remarkably boost the EMFE-constrained system's performance with limited complexity and channel information.
△ Less
Submitted 7 October, 2022; v1 submitted 21 September, 2022;
originally announced September 2022.
-
6G Radio Requirements to Support Integrated Communication, Localization, and Sensing
Authors:
Henk Wymeersch,
Aarno Pärssinen,
Traian E. Abrudan,
Andreas Wolfgang,
Katsuyuki Haneda,
Muris Sarajlic,
Marko E. Leinonen,
Musa Furkan Keskin,
Hui Chen,
Simon Lindberg,
Pekka Kyösti,
Tommy Svensson,
Xinxin Yang
Abstract:
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware archi…
▽ More
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware architectures, and on deployments. Based on this, system solutions can be identified that can support several use cases simultaneously. Since there are several ways to meet the KPIs, there is no unique solution and preferable configurations will be discussed.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Dynamic Blockage Pre-Avoidance using Reconfigurable Intelligent Surfaces
Authors:
Hao Guo,
Behrooz Makki,
Magnus Åström,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
Internet-of-vehicle (IoV) is a general concept referring to, e.g., autonomous drive based vehicle-to-everything (V2X) communications or moving relays. Here, high rate and reliability demands call for advanced multi-antenna techniques and millimeter-wave (mmw) based communications. However, the sensitivity of the mmw signals to blockage may limit the system performance, especially in highways/rural…
▽ More
Internet-of-vehicle (IoV) is a general concept referring to, e.g., autonomous drive based vehicle-to-everything (V2X) communications or moving relays. Here, high rate and reliability demands call for advanced multi-antenna techniques and millimeter-wave (mmw) based communications. However, the sensitivity of the mmw signals to blockage may limit the system performance, especially in highways/rural areas with limited building reflectors/base station deployments and high-speed devices. To avoid the blockage, various techniques have been proposed among which reconfigurable intelligent surface (RIS) is a candidate. RIS, however, has been mainly of interest in stationary/low mobility scenarios, due to the associated channel state information acquisition and beam management overhead as well as imperfect reflection. In this article, we study the potentials and challenges of RIS-assisted dynamic blockage avoidance in IoV networks. Particularly, by designing region-based RIS pre-selection as well as blockage prediction schemes, we show that RIS-assisted communication has the potential to boost the performance of IoV networks. However, there are still issues to be solved before RIS can be practically deployed in IoV networks.
△ Less
Submitted 9 November, 2023; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Velocity-aware Antenna Selection in Predictor Antenna Systems
Authors:
Hao Guo,
Behrooz Makki,
Tommy Svensson
Abstract:
Moving relay (MR), which is a candidate solution for supporting in-vehicle users, has been investigated in different studies. Due to the mobile nature of the MR, acquiring channel state information at the transmitter side (CSIT) is challenging because of the fast-changing environment around the vehicle. On top of an MR, one can use predictor antenna (PA), i.e., an additional antenna in front of th…
▽ More
Moving relay (MR), which is a candidate solution for supporting in-vehicle users, has been investigated in different studies. Due to the mobile nature of the MR, acquiring channel state information at the transmitter side (CSIT) is challenging because of the fast-changing environment around the vehicle. On top of an MR, one can use predictor antenna (PA), i.e., an additional antenna in front of the receive antenna (RA), to obtain CSIT, and recent works have investigated the benefits of such a set up. PA-aided CSIT acquisition normally works with the help of different content information such as the location and the velocity of the MR. In this paper, we study the effect of velocity awareness on the PA system, and develop adaptive antenna selection schemes in PA-assisted MRs. Results show that, compared to no-CSIT schemes, a velocity-aware antenna selection-based PA system can improve the end-to-end throughput by an order of magnitude.
△ Less
Submitted 30 September, 2021;
originally announced October 2021.
-
High-Rate Uninterrupted Internet-of-Vehicle Communications in Highways: Dynamic Blockage Avoidance and CSIT Acquisition
Authors:
Hao Guo,
Behrooz Makki,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
In future wireless networks, one of the use-cases of interest is Internet-of-vehicles (IoV). Here, IoV refers to two different functionalities, namely, serving the in-vehicle users and supporting the connected-vehicle functionalities, where both can be well provided by the transceivers installed on top of vehicles. Such dual functionality of on-vehicle transceivers implies strict rate and reliabil…
▽ More
In future wireless networks, one of the use-cases of interest is Internet-of-vehicles (IoV). Here, IoV refers to two different functionalities, namely, serving the in-vehicle users and supporting the connected-vehicle functionalities, where both can be well provided by the transceivers installed on top of vehicles. Such dual functionality of on-vehicle transceivers implies strict rate and reliability requirements, for which one may need to communicate at millimeter wave (mmW) frequencies. However, IoV communication at mmW requires up-to-date channel state information (CSI) and blockage avoidance. In this article, we incorporate the recently proposed concept of predictor antennas (PAs) into a large-scale cooperative PA (LSCPA) setup where both temporal blockages and CSI out-dating are avoided via base stations (BSs)/vehicles cooperation. Summarizing the ongoing standardization progress enabling IoV communications, we present the potentials and challenges of the LSCPA setup, and compare the effect of cooperative and non-cooperative schemes on the performance of IoV links. As we show, BSs cooperation and blockage/CSI prediction can boost the performance of IoV links remarkably.
△ Less
Submitted 11 April, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Integration of Communication and Sensing in 6G: a Joint Industrial and Academic Perspective
Authors:
Henk Wymeersch,
Deep Shrestha,
Carlos Morais de Lima,
Vijaya Yajnanarayana,
Björn Richerzhagen,
Musa Furkan Keskin,
Kim Schindhelm,
Alejandro Ramirez,
Andreas Wolfgang,
Mar Francis de Guzman,
Katsuyuki Haneda,
Tommy Svensson,
Robert Baldemair,
Stefan Parkvall
Abstract:
6G will likely be the first generation of mobile communication that will feature tight integration of localization and sensing with communication functionalities. Among several worldwide initiatives, the Hexa-X flagship project stands out as it brings together 25 key players from adjacent industries and academia, and has among its explicit goals to research fundamentally new radio access technolog…
▽ More
6G will likely be the first generation of mobile communication that will feature tight integration of localization and sensing with communication functionalities. Among several worldwide initiatives, the Hexa-X flagship project stands out as it brings together 25 key players from adjacent industries and academia, and has among its explicit goals to research fundamentally new radio access technologies and high-resolution localization and sensing. Such features will not only enable novel use cases requiring extreme localization performance, but also provide a means to support and improve communication functionalities. This paper provides an overview of the Hexa-X vision alongside the envisioned use cases. To close the required performance gap of these use cases with respect to 5G, several technical enablers will be discussed, together with the associated research challenges for the coming years.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Joint Scheduling and Throughput Maximization in Self-backhauled Millimeter Wave Cellular Networks
Authors:
Chao Fang,
Charitha Madapatha,
Behrooz Makki,
Tommy Svensson
Abstract:
Integrated access and backhaul (IAB) networks have the potential to provide high data rate in both access and backhaul networks by sharing the same spectrum. Due to the dense deployment of small base stations (SBSs), IAB networks connect SBSs to the core network in a wireless manner without the deployment of high-cost optical fiber. As large spectrum is available in mmWave bands and high data rate…
▽ More
Integrated access and backhaul (IAB) networks have the potential to provide high data rate in both access and backhaul networks by sharing the same spectrum. Due to the dense deployment of small base stations (SBSs), IAB networks connect SBSs to the core network in a wireless manner without the deployment of high-cost optical fiber. As large spectrum is available in mmWave bands and high data rate is achieved by using directional beamforming, the access and backhaul links can be integrated in the same frequency band while satisfying quality-of-service constraints. In this work, we optimize the scheduling of access and backhaul links such that the minimum throughput of the access links is maximized based on the revised simplex method. By considering a probability based line-ofsight (LOS) and non-line-of-sight (NLOS) path loss model and the antenna array gains, we compare the achievable minimum access throughput of the IAB network with the network with only macro base stations, and study the effect of the network topology and antenna parameters on the achievable minimum throughput. Simulation results show that, for a broad range of parameter settings, the implementation of IABs improves the access minimum achievable throughput.
△ Less
Submitted 4 June, 2021;
originally announced June 2021.
-
Predictor Antenna: A Technique to Boost the Performance of Moving Relays
Authors:
Hao Guo,
Behrooz Makki,
Dinh-Thuy Phan-Huy,
Erik Dahlman,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
In future wireless systems, a large number of users may access the networks via moving relays (MRs) installed on top of vehicles. One of the main challenges of MRs is rapid channel variation which may make channel estimation, and its following procedures, difficult. To address these issues, various schemes are designed, among which predictor antenna (PA) is a candidate. The PA setup refers to a sy…
▽ More
In future wireless systems, a large number of users may access the networks via moving relays (MRs) installed on top of vehicles. One of the main challenges of MRs is rapid channel variation which may make channel estimation, and its following procedures, difficult. To address these issues, various schemes are designed, among which predictor antenna (PA) is a candidate. The PA setup refers to a system with two (sets of) antennas on top of a vehicle, where the PA(s) positioned in front of the vehicle is(are) utilized to predict the channel state information required for data transmission to the receive antennas (RAs) aligned behind the PA. In this paper, we introduce the concept and the potentials of PA systems. Moreover, summarizing the field trials for PAs and the 3GPP attempts on (moving) relays, we compare the performance of different PA and non-PA methods for vehicle communications in both urban and rural areas with the PA setup backhauled through terrestrial or satellite technology, respectively. As we show, with typical parameter settings and vehicle speeds, a single-antenna PA-assisted setup can boost the backhaul throughput of MRs, compared to state-of-the-art open-loop schemes, by up to 50%.
△ Less
Submitted 5 May, 2021; v1 submitted 18 December, 2020;
originally announced December 2020.
-
Predictor Antennas for Moving Relays: Finite Block-length Analysis
Authors:
Hao Guo,
Behrooz Makki,
Tommy Svensson
Abstract:
In future wireless networks, we anticipate that a large number of devices will connect to mobile networks through moving relays installed on vehicles, in particular in public transport vehicles. To provide high-speed moving relays with accurate channel state information different methods have been proposed, among which predictor antenna (PA) is one of the promising ones. Here, the PA system refers…
▽ More
In future wireless networks, we anticipate that a large number of devices will connect to mobile networks through moving relays installed on vehicles, in particular in public transport vehicles. To provide high-speed moving relays with accurate channel state information different methods have been proposed, among which predictor antenna (PA) is one of the promising ones. Here, the PA system refers to a setup where two sets of antennas are deployed on top of a vehicle, and the front antenna(s) can be used to predict the channel state information for the antenna(s) behind. In this paper, we study the delay-limited performance of PA systems using adaptive rate allocations. We use the fundamental results on the achievable rate of finite block-length codes to study the system throughput and error probability in the presence of short packets. Particularly, we derive closed-form expressions for the error probability, the average transmit rate as well as the optimal rate allocation, and study the effect of different parameters on the performance of PA systems. The results indicate that rate adaptation under finite block-length codewords can impro
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Scoring the Terabit/s Goal:Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Simon Bicais,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Carmen D'Andrea,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Behrooz Makki,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Shahriar Shahabuddin,
Tommy Svensson
, et al. (4 additional authors not shown)
Abstract:
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we conside…
▽ More
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity.
△ Less
Submitted 21 February, 2021; v1 submitted 17 August, 2020;
originally announced August 2020.
-
6G White Paper on Localization and Sensing
Authors:
Andre Bourdoux,
Andre Noll Barreto,
Barend van Liempd,
Carlos de Lima,
Davide Dardari,
Didier Belot,
Elana-Simona Lohan,
Gonzalo Seco-Granados,
Hadi Sarieddeen,
Henk Wymeersch,
Jaakko Suutala,
Jani Saloranta,
Maxime Guillaud,
Minna Isomursu,
Mikko Valkama,
Muhammad Reza Kahar Aziz,
Rafael Berkvens,
Tachporn Sanguanpuak,
Tommy Svensson,
Yang Miao
Abstract:
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principl…
▽ More
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Following the trend initiated in the 5G NR systems, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler and angular resolutions, as well as localization to cm-level degree of accuracy. Moreover, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. 6G will be truly intelligent wireless systems that will not only provide ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency and space. This white paper concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust. Addressing these challenges will undoubtedly require an inter-disciplinary and concerted effort from the research community.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Rate Adaptation in Predictor Antenna Systems
Authors:
Hao Guo,
Behrooz Makki,
Tommy Svensson
Abstract:
Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. This letter studies the performance of PA systems in the presence of the mismatching problem, i.e., when the channel observed by…
▽ More
Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. This letter studies the performance of PA systems in the presence of the mismatching problem, i.e., when the channel observed by the PA is not exactly the same as the channel experienced by the RA. Particularly, we study the effect of spatial mismatching on the accuracy of channel state information estimation and rate adaption. We derive closed-form expressions for instantaneous throughput, outage probability, and the throughput-optimized rate adaptation. Also, we take the temporal evolution of the channel into account and evaluate the system performance in temporally-correlated conditions. The simulation and analytical results show that, while PA-assisted adaptive rate adaptation leads to considerable performance improvement, the throughput and the outage probability are remarkably affected by the spatial mismatch and temporal correlations.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
White Paper on Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Tommy Svensson,
Oskari Tervo,
Antti Tolli,
Qingqing Wu,
Wen Xu
Abstract:
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks wil…
▽ More
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
On Delay-limited Average Rate of HARQ-based Predictor Antenna Systems
Authors:
Hao Guo,
Behrooz Makki,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. In this work, we study the effect of spatial mismatch on the accuracy of channel state information estimation, and analyze the d…
▽ More
Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. In this work, we study the effect of spatial mismatch on the accuracy of channel state information estimation, and analyze the delay-constrained average rate of hybrid automatic repeat request (HARQ)-based PA systems. We consider variable-length incremental redundancy (INR) HARQ protocol, and derive a closed-form expression for the maximum average rate subject to a maximum delay constraint. Moreover, we study the effect of different parameters such as the vehicle speed, the antenna distance and the rate allocation on the system performance. The results indicate that, compared to the open-loop case, the delay-limited average rate is considerably improved with our proposed PA-HARQ scheme.
△ Less
Submitted 10 December, 2020; v1 submitted 3 April, 2020;
originally announced April 2020.
-
Power Allocation in HARQ-based Predictor Antenna Systems
Authors:
Hao Guo,
Behrooz Makki,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
In this work, we study the performance of predictor antenna (PA) systems using hybrid automatic repeat request (HARQ). Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. In this setup, the PA positioned in the front of the vehicle can be used to predict the channel state information at the transmitter (CSIT) for data transmission to the receive anten…
▽ More
In this work, we study the performance of predictor antenna (PA) systems using hybrid automatic repeat request (HARQ). Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. In this setup, the PA positioned in the front of the vehicle can be used to predict the channel state information at the transmitter (CSIT) for data transmission to the receive antenna (RA) that is aligned behind the PA. Considering spatial mismatch, due to the vehicle mobility, we derive closed-form expressions for the optimal power allocation and the minimum average power of the PA systems under different outage probability constraints. The results are presented for different types of HARQ protocols and we study the effect of different parameters on the performance of PA systems. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy. Moreover, for different vehicle speeds, we show that HARQ-based feedback can reduce the outage-limited power consumption of PA systems by orders of magnitude.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
A Semi-Linear Approximation of the First-Order Marcum $Q$-function with Application to Predictor Antenna Systems
Authors:
Hao Guo,
Behrooz Makki,
Mohamed-Slim Alouini,
Tommy Svensson
Abstract:
First-order Marcum $Q$-function is observed in various problem formulations. However, it is not an easy-to-handle function. For this reason, in this paper, we first present a semi-linear approximation of the Marcum $Q$-function. Our proposed approximation is useful because it simplifies, e.g., various integral calculations including Marcum $Q$-function as well as different operations such as param…
▽ More
First-order Marcum $Q$-function is observed in various problem formulations. However, it is not an easy-to-handle function. For this reason, in this paper, we first present a semi-linear approximation of the Marcum $Q$-function. Our proposed approximation is useful because it simplifies, e.g., various integral calculations including Marcum $Q$-function as well as different operations such as parameter optimization. Then, as an example of interest, we apply our proposed approximation approach to the performance analysis of predictor antenna (PA) systems. Here, the PA system is referred to as a system with two sets of antennas on the roof of a vehicle. Then, the PA positioned in the front of the vehicle can be used to improve the channel state estimation for data transmission of the receive antenna that is aligned behind the PA. Considering spatial mismatch due to the mobility, we derive closed-form expressions for the instantaneous and average throughput as well as the throughput-optimized rate allocation. As we show, our proposed approximation scheme enables us to analyze PA systems with high accuracy. Moreover, our results show that rate adaptation can improve the performance of PA systems with different levels of spatial mismatch.
△ Less
Submitted 9 December, 2020; v1 submitted 25 January, 2020;
originally announced January 2020.
-
3D Beamforming in Reconfigurable Intelligent Surfaces-assisted Wireless Communication Networks
Authors:
S. Mohammad Razavizadeh,
Tommy Svensson
Abstract:
Reconfigurable Intelligent Surfaces (RIS) or Intelligent Reflecting Surfaces (IRS) are metasurfaces that can be deployed in various places in wireless environments to make these environments controllable and reconfigurable. In this paper, we investigate the problem of using 3D beamforming in RIS-empowered wireless networks and propose a new scheme that provides more degrees of freedom in designing…
▽ More
Reconfigurable Intelligent Surfaces (RIS) or Intelligent Reflecting Surfaces (IRS) are metasurfaces that can be deployed in various places in wireless environments to make these environments controllable and reconfigurable. In this paper, we investigate the problem of using 3D beamforming in RIS-empowered wireless networks and propose a new scheme that provides more degrees of freedom in designing and deploying the RIS-based networks. In the proposed scheme, a base station (BS) equipped with a full dimensional array of antennas optimizes its radiation pattern in the three-dimensional space to maximize the received signal to noise ratio at a target user. We also study the effect of angle of incidence of the received signal by the RIS on its reflecting properties and find a relation between this angle and the BS antenna array's tilt and elevation angles. The user receives the signal from a reflected path from the RIS as well as from a direct path from the BS which both depend on the BS antenna array's tilt and elevation angles. These angles and also the RIS element's phase shifts are jointly numerically optimized. Our simulation results show that using RIS-assisted 3D beamforming with optimized phase shifts and radiation angles can considerably improve the performance of wireless networks.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
Hybrid Precoding in Cooperative Millimeter Wave Networks
Authors:
Chao Fang,
Behrooz Makki,
**gya Li,
Tommy Svensson
Abstract:
In this paper, we study the performance of cooperative millimeter wave (mmWave) networks with hybrid precoding architectures. Considering joint transmissions and BS silence strategy, we propose hybrid precoding algorithms which minimize the sum power consumption of the base stations (BSs), for both fully- and partially-connected hybrid precoding (FHP and PHP, respectively) schemes, for single-carr…
▽ More
In this paper, we study the performance of cooperative millimeter wave (mmWave) networks with hybrid precoding architectures. Considering joint transmissions and BS silence strategy, we propose hybrid precoding algorithms which minimize the sum power consumption of the base stations (BSs), for both fully- and partially-connected hybrid precoding (FHP and PHP, respectively) schemes, for single-carrier and orthogonal frequency-division multiplexing systems. We reformulate the analog precoding part as an equal-gain transmission problem, which only depends on the channel information, and the digital precoding part as a relaxed convex semidefinite program subject to per-user quality-of-service constraints that gives the optimal sum power consumption in terms of the BS silence strategy. In order to reduce the complexity of the hybrid precoding algorithm with optimal BS silence strategy, we propose a sub-optimal hybrid precoding algorithm that iteratively put BSs with small power into the silent mode. The simulation results show that, depending on the parameter settings, the power consumption of the PHP may be dominated by the RF transmit power and it may result in a larger power consumption than the FHP. For the cases with 2 BSs and 4 users, implementation of the FHP and the PHP in cooperative networks reduces the required RF transmit power, compared to the case in a non-cooperative network, by 71% and 56%, respectively.
△ Less
Submitted 17 March, 2021; v1 submitted 13 January, 2020;
originally announced January 2020.
-
Joint Data Routing and Power Scheduling for Wireless Powered Communication Networks
Authors:
Mohammad Movahednasab,
Naeimeh Omidvar,
Mohammad Reza Pakravan,
Tommy Svensson
Abstract:
In a wireless powered communication network (WPCN), an energy access point supplies the energy needs of the network nodes through radio frequency wave transmission, and the nodes store the received energy in their batteries for their future data transmission. In this paper, we propose an online stochastic policy that jointly controls energy transmission from the EAP to the nodes and data transfer…
▽ More
In a wireless powered communication network (WPCN), an energy access point supplies the energy needs of the network nodes through radio frequency wave transmission, and the nodes store the received energy in their batteries for their future data transmission. In this paper, we propose an online stochastic policy that jointly controls energy transmission from the EAP to the nodes and data transfer among the nodes. For this purpose, we first introduce a novel perturbed Lyapunov function to address the limitations on the energy consumption of the nodes imposed by their batteries. Then, using Lyapunov optimization method, we propose a policy which is adaptive to any arbitrary channel statistics in the network. Finally, we provide theoretical analysis for the performance of the proposed policy and show that it stabilizes the network, and the average power consumption of the network under this policy is within a bounded gap of the minimum power level required for stabilizing the network.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.