Showing 1–29 of 29 results for author: Sukumar

Model reference adaptive control for state and input constrained linear systems

Authors: Sudipta Chattopadhyay, Srikant Sukumar, Vivek Natarajan

Abstract: State and input constraints are ubiquitous in all engineering systems. In this article, we derive adaptive controllers for uncertain linear systems under pre-specified state and input constraints. Several modifications of the model reference adaptive control (MRAC) framework have been proposed to address input constraints in uncertain linear systems. Considering the infeasibility of arbitrary refe… ▽ More State and input constraints are ubiquitous in all engineering systems. In this article, we derive adaptive controllers for uncertain linear systems under pre-specified state and input constraints. Several modifications of the model reference adaptive control (MRAC) framework have been proposed to address input constraints in uncertain linear systems. Considering the infeasibility of arbitrary reference trajectories, reference modification has been implemented in the case of input constraints in literature. The resulting conditions on the reference and input signals are difficult to verify online. Similar results on state and input constraints together have also been proposed, albeit resulting in more complex and unverifiable conditions on the control. The primary objective of this article is therefore to account for state and input constraints in uncertain linear systems by providing easily verifiable conditions on the control and reference. A combination of reference modification and barrier Lyapunov methods in adaptive control are employed to arrive at these results. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Comments: 14 pages, 8 figures

Adaptive identification of SISO linear infinite-dimensional systems

Authors: Sudipta Chattopadhyay, Srikant Sukumar, Vivek Natarajan

Abstract: We propose an adaptive algorithm for identifying the unknown parameter in a linear exponentially stable single-input single-output infinite-dimensional system. We assume that the transfer function of the infinite-dimensional system can be expressed as a ratio of two infinite series in s (the Laplace variable). We also assume that certain identifiability conditions, which include a persistency of e… ▽ More We propose an adaptive algorithm for identifying the unknown parameter in a linear exponentially stable single-input single-output infinite-dimensional system. We assume that the transfer function of the infinite-dimensional system can be expressed as a ratio of two infinite series in s (the Laplace variable). We also assume that certain identifiability conditions, which include a persistency of excitation condition, hold. For a fixed integer n, we propose an update law driven by real-time input-output data for estimating the first n+1 coefficients in the numerator and the denominator of the transfer function. We show that the estimates for the transfer function coefficients generated by the update law are close to the true values at large times provided n is sufficiently large (the estimates converge to the true values as time and n tend to infinity). The unknown parameter can be reconstructed using the transfer function coefficient estimates obtained with n large and the algebraic expressions relating the transfer function coefficients to the unknown parameter. We also provide a numerical scheme for verifying the identifiability conditions and for choosing n sufficiently large so that the value of the reconstructed parameter is close to the true value. The class of systems to which our approach is applicable includes many partial differential equations with constant/spatially-varying coefficients and distributed/boundary input and output. We illustrate the efficacy of our approach using three examples: a delay system with four unknown scalars, a 1D heat equation with two unknown scalars and a 1D wave equation with an unknown spatially-varying coefficient. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: 13 pages and 5 figures

DeeBBAA: A benchmark Deep Black Box Adversarial Attack against Cyber-Physical Power Systems

Authors: Arnab Bhattacharjee, Tapan K. Saha, Ashu Verma, Sukumar Mishra

Abstract: An increased energy demand, and environmental pressure to accommodate higher levels of renewable energy and flexible loads like electric vehicles have led to numerous smart transformations in the modern power systems. These transformations make the cyber-physical power system highly susceptible to cyber-adversaries targeting its numerous operations. In this work, a novel black box adversarial atta… ▽ More An increased energy demand, and environmental pressure to accommodate higher levels of renewable energy and flexible loads like electric vehicles have led to numerous smart transformations in the modern power systems. These transformations make the cyber-physical power system highly susceptible to cyber-adversaries targeting its numerous operations. In this work, a novel black box adversarial attack strategy is proposed targeting the AC state estimation operation of an unknown power system using historical data. Specifically, false data is injected into the measurements obtained from a small subset of the power system components which leads to significant deviations in the state estimates. Experiments carried out on the IEEE 39 bus and 118 bus test systems make it evident that the proposed strategy, called DeeBBAA, can evade numerous conventional and state-of-the-art attack detection mechanisms with very high probability. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Set input-to-state stability under input delays for nonlinear systems with disturbances

Authors: Pallavi Sinha, Irinel-Constantin Morărescu, Sukumar Srikant

Abstract: The study proposes new results on the set input-to-state stability (ISS) subject to a small input time delay for compact, invariant sets that contains the origin. First, using the nonlinear small-gain theory, we prove a Razumikhin-type theorem that ensures ISS for sets in the setup of functional differential equations (FDEs) with disturbances. Next we show how this theorem can be used to ensure se… ▽ More The study proposes new results on the set input-to-state stability (ISS) subject to a small input time delay for compact, invariant sets that contains the origin. First, using the nonlinear small-gain theory, we prove a Razumikhin-type theorem that ensures ISS for sets in the setup of functional differential equations (FDEs) with disturbances. Next we show how this theorem can be used to ensure set ISS for nonlinear systems with input delays and disturbances. In comparison to the existing research on set ISS robustness with respect to small time delays at the input, our results are rather broad, retaining the ISS gain and without any constraints on time delayed states. The effectiveness of the method is illustrated through two case-studies addressing set stability for classes of nonlinear oscillators of practical interest. △ Less

Submitted 23 November, 2022; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 11 pages

Consensus of networked double integrator systems under sensor bias

Authors: Pallavi Sinha, Srikant Sukumar, Himani Sinhmar

Abstract: A novel distributed control law for consensus of networked double integrator systems with biased measurements is developed in this article. The agents measure relative positions over a time-varying, undirected graph with an unknown and constant sensor bias corrupting the measurements. An adaptive control law is derived using Lyapunov methods to estimate the individual sensor biases accurately. The… ▽ More A novel distributed control law for consensus of networked double integrator systems with biased measurements is developed in this article. The agents measure relative positions over a time-varying, undirected graph with an unknown and constant sensor bias corrupting the measurements. An adaptive control law is derived using Lyapunov methods to estimate the individual sensor biases accurately. The proposed algorithm ensures that position consensus is achieved exponentially in addition to bias estimation. The results leverage recent advances in collective initial excitation based results in adaptive estimation. Conditions connecting bipartite graphs and collective initial excitation are also developed. The algorithms are illustrated via simulation studies on a network of double integrators with local communication and biased measurements. △ Less

Submitted 19 April, 2022; originally announced April 2022.

Comments: Under review in IEEE TCNS

Real-Time Power System Dynamic Simulation using Windowing based Waveform Relaxation Method

Authors: M Al Mamun, Sumit Paudyal, Sukumar Kamalasadan

Abstract: Power system dynamic modeling involves nonlinear differential and algebraic equations (DAEs). Solving DAEs for large power grid networks by direct implicit numerical methods could be inefficient in terms of solution time; thus, such methods are not preferred when real-time or faster than real-time performance is sought. Hence, this paper revisits Waveform Relaxation (WR) algorithm, as a distribute… ▽ More Power system dynamic modeling involves nonlinear differential and algebraic equations (DAEs). Solving DAEs for large power grid networks by direct implicit numerical methods could be inefficient in terms of solution time; thus, such methods are not preferred when real-time or faster than real-time performance is sought. Hence, this paper revisits Waveform Relaxation (WR) algorithm, as a distributed computational technique to solve power system dynamic simulations. Case studies performed on the IEEE NE 10-generator 39-bus system demonstrate that, for a certain simulation time window, the solve time for WR method is larger than the length of the simulation window; thus, WR lacks the performance needed for real-time simulators, even for a small power network. To achieve real-time performance, then a Windowing technique is applied on top of the WR, for which the solve time was obtained less than the length of a simulation window, that shows the effectiveness of the proposed method for real-time dynamic simulation of power systems. △ Less

Submitted 27 December, 2021; originally announced December 2021.

Comments: 5 pages, 8 figures, Published in 2021 IEEE PES General Meeting, To be included in the IEEE Xplore

Estimating State of Charge for xEV batteries using 1D Convolutional Neural Networks and Transfer Learning

Authors: Arnab Bhattacharjee, Ashu Verma, Sukumar Mishra, Tapan K Saha

Abstract: In this paper we propose a one-dimensional convolutional neural network (CNN)-based state of charge estimation algorithm for electric vehicles. The CNN is trained using two publicly available battery datasets. The influence of different types of noises on the estimation capabilities of the CNN model has been studied. Moreover, a transfer learning mechanism is proposed in order to make the develope… ▽ More In this paper we propose a one-dimensional convolutional neural network (CNN)-based state of charge estimation algorithm for electric vehicles. The CNN is trained using two publicly available battery datasets. The influence of different types of noises on the estimation capabilities of the CNN model has been studied. Moreover, a transfer learning mechanism is proposed in order to make the developed algorithm generalize better and estimate with an acceptable accuracy when a battery with different chemical characteristics than the one used for training the model, is used. It has been observed that using transfer learning, the model can learn sufficiently well with significantly less amount of battery data. The proposed method fares well in terms of estimation accuracy, learning speed and generalization capability. △ Less

Submitted 23 January, 2021; v1 submitted 2 November, 2020; originally announced November 2020.

Comments: 13 pages

Asymptotically Stable Optimal Multi-rate Rigid Body Attitude Estimation based on Lagrange-d'Alembert Principle

Authors: Maulik Bhatt, Amit K. Sanyal, Srikant Sukumar

Abstract: The rigid body attitude estimation problem is treated using the discrete-time Lagrange-d'Alembert principle. Three different possibilities are considered for the multi-rate relation between angular velocity measurements and direction vector measurements for attitude: 1) integer relation between sampling rates, 2) time-varying sampling rates, 3) non-integer relation between sampling rates. In all c… ▽ More The rigid body attitude estimation problem is treated using the discrete-time Lagrange-d'Alembert principle. Three different possibilities are considered for the multi-rate relation between angular velocity measurements and direction vector measurements for attitude: 1) integer relation between sampling rates, 2) time-varying sampling rates, 3) non-integer relation between sampling rates. In all cases, it is assumed that angular velocity measurements are sampled at a higher rate compared to the inertial vectors. The attitude determination problem from two or more vector measurements in the body-fixed frame is formulated as Wahba's problem. At instants when direction vector measurements are absent, a discrete-time model for attitude kinematics is used to propagate past measurements. A discrete-time Lagrangian is constructed as the difference between a kinetic energy-like term that is quadratic in the angular velocity estimation error and an artificial potential energy-like term obtained from Wahba's cost function. An additional dissipation term is introduced and the discrete-time Lagrange-d'Alembert principle is applied to the Lagrangian with this dissipation to obtain an optimal filtering scheme. A discrete-time Lyapunov analysis is carried out to show that the optimal filtering scheme is asymptotically stable in the absence of measurement noise and the domain of convergence is almost global. For a realistic evaluation of the scheme, numerical experiments are conducted with inputs corrupted by bounded measurement noise. These numerical simulations exhibit convergence of the estimated states to a bounded neighborhood of the actual states. △ Less

Submitted 17 June, 2022; v1 submitted 7 August, 2020; originally announced August 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:2007.08185

Rigid Body Geometric Attitude Estimator using Multi-rate Sensors

Authors: Maulik Bhatt, Srikant Sukumar, Amit K. Sanyal

Abstract: A geometric estimator is proposed for the rigid body attitude under multi-rate measurements using discrete-time Lyapunov stability analysis in this work. The angular velocity measurements are assumed to be sampled at a higher rate compared to the attitude. The attitude determination problem from two or more vector measurements in the body-fixed frame is formulated as Wahba's problem. In the case w… ▽ More A geometric estimator is proposed for the rigid body attitude under multi-rate measurements using discrete-time Lyapunov stability analysis in this work. The angular velocity measurements are assumed to be sampled at a higher rate compared to the attitude. The attitude determination problem from two or more vector measurements in the body-fixed frame is formulated as Wahba's problem. In the case when measurements are absent, a discrete-time model for attitude kinematics is assumed in order to propagate the measurements. A discrete-time Lyapunov function is constructed as the sum of a kinetic energy-like term that is quadratic in the angular velocity estimation error and an artificial potential energy-like term obtained from Wahba's cost function. A filtering scheme is obtained by discrete-time stability analysis using a suitable Lyapunov function. The analysis shows that the filtering scheme is exponentially stable in the absence of measurement noise and the domain of convergence is almost global. For a realistic evaluation of the scheme, numerical experiments are conducted with inputs corrupted by bounded measurement noise. Simulation results exhibit convergence of the estimated states to a bounded neighborhood of the actual states. △ Less

Submitted 16 July, 2020; originally announced July 2020.

PowerPlanningDL: Reliability-Aware Framework for On-Chip Power Grid Design using Deep Learning

Authors: Sukanta Dey, Sukumar Nandi, Gaurav Trivedi

Abstract: With the increase in the complexity of chip designs, VLSI physical design has become a time-consuming task, which is an iterative design process. Power planning is that part of the floorplanning in VLSI physical design where power grid networks are designed in order to provide adequate power to all the underlying functional blocks. Power planning also requires multiple iterative steps to create th… ▽ More With the increase in the complexity of chip designs, VLSI physical design has become a time-consuming task, which is an iterative design process. Power planning is that part of the floorplanning in VLSI physical design where power grid networks are designed in order to provide adequate power to all the underlying functional blocks. Power planning also requires multiple iterative steps to create the power grid network while satisfying the allowed worst-case IR drop and Electromigration (EM) margin. For the first time, this paper introduces Deep learning (DL)-based framework to approximately predict the initial design of the power grid network, considering different reliability constraints. The proposed framework reduces many iterative design steps and speeds up the total design cycle. Neural Network-based multi-target regression technique is used to create the DL model. Feature extraction is done, and the training dataset is generated from the floorplans of some of the power grid designs extracted from the IBM processor. The DL model is trained using the generated dataset. The proposed DL-based framework is validated using a new set of power grid specifications (obtained by perturbing the designs used in the training phase). The results show that the predicted power grid design is closer to the original design with minimal prediction error (~2%). The proposed DL-based approach also improves the design cycle time with a speedup of ~6X for standard power grid benchmarks. △ Less

Submitted 24 July, 2020; v1 submitted 4 May, 2020; originally announced May 2020.

Comments: Published in proceedings of IEEE/ACM Design, Automation and Test in Europe Conference (DATE) 2020, 6 pages

MSC Class: 68T07 (Primary) 90-XX; 62J02 (Secondary) ACM Class: B.7.0; I.0

Journal ref: DATE 2020 Proceedings, 1520-1525, IEEE

On-device Filtering of Social Media Images for Efficient Storage

Authors: Dhruval Jain, DP Mohanty, Sanjeev Roy, Naresh Purre, Sukumar Moharana

Abstract: Artificially crafted images such as memes, seasonal greetings, etc are flooding the social media platforms today. These eventually start occupying a lot of internal memory of smartphones and it gets cumbersome for the user to go through hundreds of images and delete these synthetic images. To address this, we propose a novel method based on Convolutional Neural Networks (CNNs) for the on-device fi… ▽ More Artificially crafted images such as memes, seasonal greetings, etc are flooding the social media platforms today. These eventually start occupying a lot of internal memory of smartphones and it gets cumbersome for the user to go through hundreds of images and delete these synthetic images. To address this, we propose a novel method based on Convolutional Neural Networks (CNNs) for the on-device filtering of social media images by classifying these synthetic images and allowing the user to delete them in one go. The custom model uses depthwise separable convolution layers to achieve low inference time on smartphones. We have done an extensive evaluation of our model on various camera image datasets to cover most aspects of images captured by a camera. Various sorts of synthetic social media images have also been tested. The proposed solution achieves an accuracy of 98.25% on the Places-365 dataset and 95.81% on the Synthetic image dataset that we have prepared containing 30K instances. △ Less

Submitted 14 May, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

Indoor Distance Estimation using LSTMs over WLAN Network

Authors: Pranav Sankhe, Saqib Azim, Sachin Goyal, Tanya Choudhary, Kumar Appaiah, Sukumar Srikant

Abstract: The Global Navigation Satellite Systems (GNSS) like GPS suffer from accuracy degradation and are almost unavailable in indoor environments. Indoor positioning systems (IPS) based on WiFi signals have been gaining popularity. However, owing to the strong spatial and temporal variations of wireless communication channels in the indoor environment, the achieved accuracy of existing IPS is around seve… ▽ More The Global Navigation Satellite Systems (GNSS) like GPS suffer from accuracy degradation and are almost unavailable in indoor environments. Indoor positioning systems (IPS) based on WiFi signals have been gaining popularity. However, owing to the strong spatial and temporal variations of wireless communication channels in the indoor environment, the achieved accuracy of existing IPS is around several tens of centimeters. We present the detailed design and implementation of a self-adaptive WiFi-based indoor distance estimation system using LSTMs. The system is novel in its method of estimating with high accuracy the distance of an object by overcoming possible causes of channel variations and is self-adaptive to the changing environmental and surrounding conditions. The proposed design has been developed and physically realized over a WiFi network consisting of ESP8266 (NodeMCU) devices. The experiment were conducted in a real indoor environment while changing the surroundings in order to establish the adaptability of the system. We introduce and compare different architectures for this task based on LSTMs, CNNs, and fully connected networks (FCNs). We show that the LSTM based model performs better among all the above-mentioned architectures by achieving an accuracy of 5.85 cm with a confidence interval of 93% on the scale of (4.14 m * 2.86 m). To the best of our knowledge, the proposed method outperforms other methods reported in the literature by a significant margin. △ Less

Submitted 31 March, 2020; originally announced March 2020.

Comments: Published in IEEE 16th Workshop on Positioning, Navigation and Communications (WPNC 2019, Germany)

Journal ref: 2019 16th IEEE Workshop on Positioning, Navigation and Communications

Multi-Terminal DC Fault Identification for MMC-HVDC Systems based on Modal Analysis -- A Localized Protection Scheme

Authors: Vaibhav Nougain, Sukumar Mishra, George S. Misyris, Spyros Chatzivasileiadis

Abstract: We propose a localized protection scheme based on modal analysis in multi-terminal modular multilevel converter (MMC) based high voltage DC (HVDC) systems. The paper addresses the issues of localized protection scheme based DC fault identification, such as differentiating between external and internal faults, classification of type of fault contingency i.e., pole to pole (\textit{PTP}) or pole to… ▽ More We propose a localized protection scheme based on modal analysis in multi-terminal modular multilevel converter (MMC) based high voltage DC (HVDC) systems. The paper addresses the issues of localized protection scheme based DC fault identification, such as differentiating between external and internal faults, classification of type of fault contingency i.e., pole to pole (\textit{PTP}) or pole to ground (\textit{PTG}) for high impedance faults (HIFs) in the system. The scheme works on equivalent network of multi-terminal MMC-HVDC system for a DC fault, using phase-modal transformation to analyse line-mode and zero-mode voltage across the current limiting reactor (CLR) for different possible contingencies in the presence of fault resistance. The protection scheme is validated to be reliable for HIFs and in the presence of White Gaussian Noise (WGN) in measurement. The scheme operation is validated to be intact for varying fault location, fault resistances and system transients. △ Less

Submitted 22 June, 2020; v1 submitted 23 March, 2020; originally announced March 2020.

Sensorless Real-Time Reduced Order Model Based Adaptive Maximum Power Tracking Pitch Controller for Grid Connected Wind Turbines

Authors: Abilash Thakallapelli, Sudipta Ghosh, Sukumar Kamalasadan

Abstract: This paper presents a sensor-less maximum power tracking (MPT) pitch controller for grid connected Wind Turbine (WT). The main advantage of the proposed architecture is that the approach ensures smooth operation and thus minimizes the mechanical stress and damage on the WT during high wind speed and grid transient conditions. Simultaneously, it also: a) reduces transients in Point of Common Coupli… ▽ More This paper presents a sensor-less maximum power tracking (MPT) pitch controller for grid connected Wind Turbine (WT). The main advantage of the proposed architecture is that the approach ensures smooth operation and thus minimizes the mechanical stress and damage on the WT during high wind speed and grid transient conditions. Simultaneously, it also: a) reduces transients in Point of Common Coupling (PCC) bus voltage, b) reduces rotor speed oscillations, and c) controls the output power of the wind turbine without exceeding its thermal limits. The approach can work without wind speed measurements. In order to consider the effect of grid variations at the PCC, the affected area in the grid is modeled as a study area (area of interest), and remaining area (external area) is modeled as frequency dependent reduced order model (FDROM). The reduced order model (ROM) is then used to estimate the reference speed. The proposed controller is designed using the error between actual speed of the generator and the reference speed, to ensure smooth operation and limit the speed and aerodynamic power at the rated values. The architecture is evaluated using wind farm integrated Kundur's two-area and IEEE-39 bus test systems using real-time digital simulator (RTDS). △ Less

Submitted 14 September, 2019; originally announced September 2019.

Measurement-Based Wide-Area Dam** of Inter-Area Oscillations based on MIMO Identification

Authors: Abilash Thakallapelli, Sukumar Kamalasadan

Abstract: Interconnected power grid exhibits oscillatory response after a disturbance in the system. One such type of oscillations, the inter-area oscillations has the oscillation frequency in the range of 0.1 to 1 Hz. The dam** of inter-area oscillations is difficult with local controllers, but it can be achieved using a Wide Area Dam** Controller (WADC). For effective control, the input to the WADC sh… ▽ More Interconnected power grid exhibits oscillatory response after a disturbance in the system. One such type of oscillations, the inter-area oscillations has the oscillation frequency in the range of 0.1 to 1 Hz. The dam** of inter-area oscillations is difficult with local controllers, but it can be achieved using a Wide Area Dam** Controller (WADC). For effective control, the input to the WADC should be the most observable signal and the WADC output should be sent to the most controllable generator. This paper presents a measurement-based novel algorithm for multi-input-multi-output (MIMO) transfer function identification of the power system based on optimization to estimate such oscillation frequencies. Based on the MIMO transfer function the optimal control loop for WADC is estimated. The WADC design is based on the discrete linear quadratic regulator (DLQR) and Kalman filtering for dam** of inter-area oscillations. Since the MIMO identification is based on actual measurements, the proposed method can accurately monitor changes in the power grid whereas the conventional methods are based on small-signal analysis of a linearized model which does not consider changing operating conditions. The overall algorithm is implemented and validated on a RTDS/RSCAD and MATLAB real-time co-simulation platform using two-area and IEEE 39 bus power system models. △ Less

Submitted 14 September, 2019; originally announced September 2019.

Comments: Wide Area Dam** Control, IEEE 39 Bus

Distributed Adaptive Coverage Control of Differential Drive Robotic Sensors

Authors: Rihab Abdul Razak, Srikant Sukumar, Hoam Chung

Abstract: This paper is concerned with the deployment of multiple mobile robots in order to autonomously cover a region Q. The region to be covered is described using a density function which may not be apriori known. In this paper, we pose the coverage problem as an optimization problem over some space of functions on Q. In particular, we look at L 2 -distance based coverage algorithm and derive adaptive c… ▽ More This paper is concerned with the deployment of multiple mobile robots in order to autonomously cover a region Q. The region to be covered is described using a density function which may not be apriori known. In this paper, we pose the coverage problem as an optimization problem over some space of functions on Q. In particular, we look at L 2 -distance based coverage algorithm and derive adaptive control laws for the same. We also propose a modified adaptive control law incorporating consensus for better parameter convergence. We implement the algorithms on real differential drive robots with both simulated density function as well as density function implemented using light sources. We also compare the L 2 -distance based method with the locational optimization method using experiments. △ Less

Submitted 3 August, 2019; originally announced August 2019.

Real-time frequency based reduced order modeling of large power grid

Authors: Abilash Thakallapelli, Sudipta Ghosh, Sukumar Kamalasadan

Abstract: Large power systems are complex and real-time modeling of the grid for electromagnetic simulation (EMT) studies is impractical. In general, there are methods that reduce large power system into an equivalent network that requires less computational resource, while preserving electromechanical (low frequency) and high frequency behavior of the original system. This can be achieved by modeling the a… ▽ More Large power systems are complex and real-time modeling of the grid for electromagnetic simulation (EMT) studies is impractical. In general, there are methods that reduce large power system into an equivalent network that requires less computational resource, while preserving electromechanical (low frequency) and high frequency behavior of the original system. This can be achieved by modeling the area not of interest (external area) as a combination of Transient Stability Analysis (TSA) type phasor model equivalent and Frequency Dependent Network Equivalent (FDNE). TSA retains electromechanical behavior, whereas FDNE retains high frequency behavior of the original power system. To this effect, this paper introduces a method of develo** FDNE based on an online recursive least squares (RLS) identification algorithm in z-domain, and modeling of reduced power systems as FDNE and as a combination of TSA and FDNE using real-time digital simulators. △ Less

Submitted 24 July, 2019; originally announced July 2019.

Comments: Real-time Simulator, Electromagnetic Simulation, Transient Stability Type Equivalent, Frequency Dependent Network Equivalent (FDNE), Recursive Least Square Identification (RLS)

Journal ref: Power and Energy Society General Meeting, 2016, Boston, MA, USA

Development and Applicability of Online Passivity Enforced Wide-Band Multi-Port Equivalents For Hybrid Transient Simulation

Authors: Abilash Thakallapelli, Sudipta Ghosh, Sukumar Kamalasadan

Abstract: This paper presents a method for develo** single and multi-port frequency dependent network equivalent (FDNE) based on a passivity enforced online recursive least squares identification algorithm, which identifies the input admittance matrix in z-domain. Furthermore, with the proposed architecture, a real-time hybrid model of the reduced power system is developed that integrate transient stabili… ▽ More This paper presents a method for develo** single and multi-port frequency dependent network equivalent (FDNE) based on a passivity enforced online recursive least squares identification algorithm, which identifies the input admittance matrix in z-domain. Furthermore, with the proposed architecture, a real-time hybrid model of the reduced power system is developed that integrate transient stability analysis and FDNE. Main advantages of the proposed architecture are, it identifies the FDNE even with unknown network parameters in the frequency range of interest, and yet can be implemented directly due to discrete formulation while maintaining desired accuracy, stability, and passivity conditions. The accuracy and characteristics of the proposed method are verified by implementing on two-area, IEEE 39 and 68 bus power system models. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Journal ref: IEEE Trans. on Power Syst., Volume: 34, No: 3, pp. 2302 - 2311, May. 2019

Coherency and Online Signal Selection Based Wide Area Control of Wind Integrated Power Grid

Authors: Abilash Thakallapelli, S J Hossain, Sukumar Kamalasadan

Abstract: This paper introduces a novel method of designing wide area control (WAC) based on a discrete linear quadratic regulator and Kalman filtering based state-estimation that can be applied for real-time dam** of interarea oscillations of wind integrated power grid. The main advantages of the proposed method are that the architecture provides online coherency grou** that properly characterizes real… ▽ More This paper introduces a novel method of designing wide area control (WAC) based on a discrete linear quadratic regulator and Kalman filtering based state-estimation that can be applied for real-time dam** of interarea oscillations of wind integrated power grid. The main advantages of the proposed method are that the architecture provides online coherency grou** that properly characterizes real-time changes in the power grid and online wide-area signal selection based on residue method for proper selection of the WAC signals. The proposed architecture can, thus, accurately monitors changes in the power grid and select the appropriate control signal for more effectively dam** the interarea oscillation when compared to the conventional local signal based power system stabilizers or offline based WAC designs. The architecture is tested on a wind integrated two-area system and the IEEE 39 bus system in order to show the capability of the proposed method. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Journal ref: IEEE Trans. on Industrial Applications, Volume: 54, No: 4, pp. 3712 - 3722, Mar. 2018

Alternating Direction Method of Multipliers (ADMMs) Based Distributed Approach For Wide-Area Control

Authors: Abilash Thakallapelli, Sukumar Kamalasadan

Abstract: In this paper, an alternating direction method of multipliers based novel distributed wide-area control architecture is proposed for dam** the interarea oscillations. In this approach, first, an interconnected power system is divided into areas based on coherency grou**. Second, local processors are assigned on each area that estimate a black-box transfer function model based on Lagrange multi… ▽ More In this paper, an alternating direction method of multipliers based novel distributed wide-area control architecture is proposed for dam** the interarea oscillations. In this approach, first, an interconnected power system is divided into areas based on coherency grou**. Second, local processors are assigned on each area that estimate a black-box transfer function model based on Lagrange multipliers using measurements. These local area processors are then used to estimate a global transfer function model of the power system based on a consensus algorithm through a global processor. After convergence, a transfer function residue corresponding to the interarea mode of interest is derived, to determine optimal wide area control loop. Finally, a wide-area dam** controller is designed based on this information. The efficacy of the controller is validated using two area and IEEE-39 bus test systems on RTDS/RSCAD and MATLAB cosimulation platform. △ Less

Submitted 15 July, 2019; originally announced July 2019.

Journal ref: IEEE Trans. on Industrial Applications, Volume: 55, No: 3, pp. 3215-3227, Feb. 2019

Scalar Field Estimation with Mobile Sensor Networks

Authors: Rihab Abdul Razak, Sukumar Srikant, Hoam Chung

Abstract: In this paper, we consider the problem of estimating a scalar field using a network of mobile sensors which can measure the value of the field at their instantaneous location. The scalar field to be estimated is assumed to be represented by positive definite radial basis kernels and we use techniques from adaptive control and Lyapunov analysis to prove the stability of the proposed estimation algo… ▽ More In this paper, we consider the problem of estimating a scalar field using a network of mobile sensors which can measure the value of the field at their instantaneous location. The scalar field to be estimated is assumed to be represented by positive definite radial basis kernels and we use techniques from adaptive control and Lyapunov analysis to prove the stability of the proposed estimation algorithm. The convergence of the estimated parameter values to the true values is guaranteed by planning the motion of the mobile sensors to satisfy persistence-like conditions. △ Less

Submitted 2 July, 2019; originally announced July 2019.

Comments: 12 pages

Stabilization under round robin scheduling of control inputs in nonlinear systems

Authors: Chinmay Maheshwari, Sukumar Srikant, Debasish Chatterjee

Abstract: We study stability of multivariable control-affine nonlinear systems under sparsification of feedback controllers. Sparsification in our context refers to the scheduling of the individual control inputs one at a time in rapid periodic sweeps over the set of control inputs, which corresponds to round-robin scheduling. We prove that if a locally asymptotically stabilizing feedback controller is spar… ▽ More We study stability of multivariable control-affine nonlinear systems under sparsification of feedback controllers. Sparsification in our context refers to the scheduling of the individual control inputs one at a time in rapid periodic sweeps over the set of control inputs, which corresponds to round-robin scheduling. We prove that if a locally asymptotically stabilizing feedback controller is sparsified via the round-robin scheme and each control action is scaled appropriately, then the corresponding equilibrium of the resulting system is stabilized when the scheduling is sufficiently fast; under mild additional conditions, local asymptotic stabilization of the corresponding equilibrium can also be guaranteed. Moreover, the basin of attraction for the equilibrium of scheduled system also remains same as the original system under sufficiently fast switching. Our technical tools are derived from optimal control theory, and our results also contribute to the literature on the stability of switched systems in the fast switching regime. Illustrative numerical examples depicting several subtle features of our results are included. △ Less

Submitted 3 September, 2020; v1 submitted 23 May, 2019; originally announced May 2019.

Comments: 29 pages, 10 figures

MSC Class: 93C10; 93D05; 93D20

Lyapunov-like functions for attitude control via feedback integrators

Authors: Tejaswi K. C., Srikant Sukumar, Ravi Banavar

Abstract: The notion of feedback integrators permits Euclidean integration schemes for dynamical systems evolving on manifolds. Here, a constructive Lyapunov function for the attitude dynamics embedded in an ambient Euclidean space has been proposed. We then combine the notion of feedback integrators with the proposed Lyapunov function to obtain a feedback law for the attitude control system. The combinatio… ▽ More The notion of feedback integrators permits Euclidean integration schemes for dynamical systems evolving on manifolds. Here, a constructive Lyapunov function for the attitude dynamics embedded in an ambient Euclidean space has been proposed. We then combine the notion of feedback integrators with the proposed Lyapunov function to obtain a feedback law for the attitude control system. The combination of the two techniques yields a domain of attraction for the closed loop dynamics, where earlier contributions were based on linearization ideas. Further, the analysis and synthesis of the feedback scheme is carried out entirely in Euclidean space. The proposed scheme is also shown to be robust to numerical errors. △ Less

Submitted 23 March, 2019; originally announced March 2019.

Comments: Submitted to CDC 2019

On optimal multiplexing of an ensemble of discrete-time constrained control systems on matrix Lie groups

Authors: Chinmay Maheshwari, Sukumar Srikant, Debasish Chatterjee

Abstract: We study a constrained optimal control problem for an ensemble of control systems. Each sub-system (or plant) evolves on a matrix Lie group, and must satisfy given state and control action constraints pointwise in time. In addition, certain multiplexing requirement is imposed: the controller must be shared between the plants in the sense that at any time instant the control signal may be sent to o… ▽ More We study a constrained optimal control problem for an ensemble of control systems. Each sub-system (or plant) evolves on a matrix Lie group, and must satisfy given state and control action constraints pointwise in time. In addition, certain multiplexing requirement is imposed: the controller must be shared between the plants in the sense that at any time instant the control signal may be sent to only one plant. We provide first-order necessary conditions for optimality in the form of suitable Pontryagin maximum principle in this problem. Detailed numerical experiments are presented for a system of two satellites performing energy optimal maneuvers under the preceding family of constraints. △ Less

Submitted 2 October, 2019; v1 submitted 22 February, 2019; originally announced February 2019.

Comments: 29 pages, 7 figures

MSC Class: 93B27

Optimal multiplexing of sparse controllers for linear systems

Authors: Yogesh Kumar, Sukumar Srikant, Debasish Chatterjee

Abstract: This article treats three problems of sparse and optimal multiplexing a finite ensemble of linear control systems. Given an ensemble of linear control systems, multiplexing of the controllers consists of an algorithm that selects, at each time \(t\), only one from the ensemble of linear systems is actively controlled whereas the other systems evolve in open-loop. The first problem treated here is… ▽ More This article treats three problems of sparse and optimal multiplexing a finite ensemble of linear control systems. Given an ensemble of linear control systems, multiplexing of the controllers consists of an algorithm that selects, at each time \(t\), only one from the ensemble of linear systems is actively controlled whereas the other systems evolve in open-loop. The first problem treated here is a ballistic reachability problem where the control signals are required to be maximally sparse and multiplexed, the second concerns sparse and optimally multiplexed linear quadratic control, and the third is a sparse and optimally multiplexed Mayer problem. Numerical experiments are provided to demonstrate the efficacy of the techniques developed here. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Comments: 5 figures

MSC Class: 49J15

A Review of Neural Network Based Machine Learning Approaches for Rotor Angle Stability Control

Authors: Reza Yousefian, Sukumar Kamalasadan

Abstract: This paper reviews the current status and challenges of Neural Networks (NNs) based machine learning approaches for modern power grid stability control including their design and implementation methodologies. NNs are widely accepted as Artificial Intelligence (AI) approaches offering an alternative way to control complex and ill-defined problems. In this paper various application of NNs for power… ▽ More This paper reviews the current status and challenges of Neural Networks (NNs) based machine learning approaches for modern power grid stability control including their design and implementation methodologies. NNs are widely accepted as Artificial Intelligence (AI) approaches offering an alternative way to control complex and ill-defined problems. In this paper various application of NNs for power system rotor angle stabilization and control problem is discussed. The main focus of this paper is on the use of Reinforcement Learning (RL) and Supervised Learning (SL) algorithms in power system wide-area control (WAC). Generally, these algorithms due to their capability in modeling nonlinearities and uncertainties are used for transient classification, neuro-control, wide-area monitoring and control, renewable energy management and control, and so on. The works of researchers in the field of conventional and renewable energy systems are reported and categorized. Paper concludes by presenting, comparing and evaluating various learning techniques and infrastructure configurations based on efficiency. △ Less

Submitted 5 January, 2017; originally announced January 2017.

A jammer's perspective of reachability and LQ optimal control

Authors: Sukumar Srikant, Debasish Chatterjee

Abstract: This article treats two problems dealing with control of linear systems in the presence of a jammer that can sporadically turn off the control signal. The first problem treats the standard reachability problem, and the second treats the standard linear quadratic regulator problem under the above class of jamming signals. We provide necessary and sufficient conditions for optimality based on a nons… ▽ More This article treats two problems dealing with control of linear systems in the presence of a jammer that can sporadically turn off the control signal. The first problem treats the standard reachability problem, and the second treats the standard linear quadratic regulator problem under the above class of jamming signals. We provide necessary and sufficient conditions for optimality based on a nonsmooth Pontryagin maximum principle. △ Less

Submitted 1 March, 2016; originally announced March 2016.

Comments: 9 pages

Journal ref: Automatica, Vol. 70, pp. 295-302, 2016

Stabilizing Controllers for Multi-Input, Singular Control Gain Systems

Authors: Srikant Sukumar, Maruthi R. Akella

Abstract: This paper proposes a new methodology for design of a stabilizing control law for multi-input linear systems with time-varying, singular gains on the control. The results presented here assume the control gain to satisfy persistence of excitation which is a necessary condition for existence of stabilizing controllers in the presence of unstable drift. This work involves a novel persistence filter… ▽ More This paper proposes a new methodology for design of a stabilizing control law for multi-input linear systems with time-varying, singular gains on the control. The results presented here assume the control gain to satisfy persistence of excitation which is a necessary condition for existence of stabilizing controllers in the presence of unstable drift. This work involves a novel persistence filter construction and provides a significant extension to the authors' previous result on stabilization of single-input linear systems with time-varying singular gains. An application to underactuated spacecraft stabilization is shown which illustrates the interesting features of the time-varying control design in stabilization of nonlinear dynamical systems. Finally, the development of an observer counterpart of these results is presented in the presence of multiple-outputs subject to singular measurement gains. △ Less

Submitted 16 October, 2014; originally announced October 2014.

Comments: A version of this paper was presented at the IEEE Conference in Decision and Control, 2012 in Maui, Hawaii

Persistence based analysis of consensus protocols for dynamic graph networks

Authors: Nilanjan Roy Chowdhury, Srikant Sukumar

Abstract: This article deals with the consensus problem involving agents with time-varying singularities in the dynamics or communication in undirected graph networks. Existing results provide control laws which guarantee asymptotic consensus. These results are based on the analysis of a system switching between piecewise constant and time-invariant dynamics. This work introduces a new analysis technique re… ▽ More This article deals with the consensus problem involving agents with time-varying singularities in the dynamics or communication in undirected graph networks. Existing results provide control laws which guarantee asymptotic consensus. These results are based on the analysis of a system switching between piecewise constant and time-invariant dynamics. This work introduces a new analysis technique relying upon classical notions of persistence of excitation to study the convergence properties of the time-varying multi-agent dynamics. Since the individual edge weights pass through singularities and vary with time, the closed-loop dynamics consists of a non-autonomous linear system. Instead of simplifying to a piecewise continuous switched system as in literature, smooth variations in edge weights are allowed, albeit assuming an underlying persistence condition which characterizes sufficient inter-agent communication to reach consensus. The consensus task is converted to edge-agreement in order to study a stabilization problem to which classical persistence based results apply. The new technique allows precise computation of the rate of convergence to the consensus value. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Comments: This article contains 7 pages and includes 4 figures. it is accepted in 13th European Control Conference