-
Cooperative Automated Driving for Bottleneck Scenarios in Mixed Traffic
Authors:
M. V. Baumann,
J. Beyerer,
H. S. Buck,
B. Deml,
S. Ehrhardt,
Ch. Frese,
D. Kleiser,
M. Lauer,
M. Roschani,
M. Ruf,
Ch. Stiller,
P. Vortisch,
J. R. Ziehn
Abstract:
Connected automated vehicles (CAV), which incorporate vehicle-to-vehicle (V2V) communication into their motion planning, are expected to provide a wide range of benefits for individual and overall traffic flow. A frequent constraint or required precondition is that compatible CAVs must already be available in traffic at high penetration rates. Achieving such penetration rates incrementally before…
▽ More
Connected automated vehicles (CAV), which incorporate vehicle-to-vehicle (V2V) communication into their motion planning, are expected to provide a wide range of benefits for individual and overall traffic flow. A frequent constraint or required precondition is that compatible CAVs must already be available in traffic at high penetration rates. Achieving such penetration rates incrementally before providing ample benefits for users presents a chicken-and-egg problem that is common in connected driving development. Based on the example of a cooperative driving function for bottleneck traffic flows (e.g. at a roadblock), we illustrate how such an evolutionary, incremental introduction can be achieved under transparent assumptions and objectives. To this end, we analyze the challenge from the perspectives of automation technology, traffic flow, human factors and market, and present a principle that 1) accounts for individual requirements from each domain; 2) provides benefits for any penetration rate of compatible CAVs between 0 % and 100 % as well as upward-compatibility for expected future developments in traffic; 3) can strictly limit the negative effects of cooperation for any participant and 4) can be implemented with close-to-market technology. We discuss the technical implementation as well as the effect on traffic flow over a wide parameter spectrum for human and technical aspects.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Roadmap on Signal Processing for Next Generation Measurement Systems
Authors:
D. K. Iakovidis,
M. Ooi,
Y. C. Kuang,
S. Demidenko,
A. Shestakov,
V. Sinitsin,
M. Henry,
A. Sciacchitano,
A. Discetti,
S. Donati,
M. Norgia,
A. Menychtas,
I. Maglogiannis,
S. C. Wriessnegger,
L. A. Barradas Chacon,
G. Dimas,
D. Filos,
A. H. Aletras,
J. Töger,
F. Dong,
S. Ren,
A. Uhl,
J. Paziewski,
J. Geng,
F. Fioranelli
, et al. (9 additional authors not shown)
Abstract:
Signal processing is a fundamental component of almost any sensor-enabled system, with a wide range of applications across different scientific disciplines. Time series data, images, and video sequences comprise representative forms of signals that can be enhanced and analysed for information extraction and quantification. The recent advances in artificial intelligence and machine learning are shi…
▽ More
Signal processing is a fundamental component of almost any sensor-enabled system, with a wide range of applications across different scientific disciplines. Time series data, images, and video sequences comprise representative forms of signals that can be enhanced and analysed for information extraction and quantification. The recent advances in artificial intelligence and machine learning are shifting the research attention towards intelligent, data-driven, signal processing. This roadmap presents a critical overview of the state-of-the-art methods and applications aiming to highlight future challenges and research opportunities towards next generation measurement systems. It covers a broad spectrum of topics ranging from basic to industrial research, organized in concise thematic sections that reflect the trends and the impacts of current and future developments per research field. Furthermore, it offers guidance to researchers and funding agencies in identifying new prospects.
△ Less
Submitted 28 January, 2022; v1 submitted 3 November, 2021;
originally announced November 2021.
-
An Application-Driven Conceptualization of Corner Cases for Perception in Highly Automated Driving
Authors:
Florian Heidecker,
Jasmin Breitenstein,
Kevin Rösch,
Jonas Löhdefink,
Maarten Bieshaar,
Christoph Stiller,
Tim Fingscheidt,
Bernhard Sick
Abstract:
Systems and functions that rely on machine learning (ML) are the basis of highly automated driving. An essential task of such ML models is to reliably detect and interpret unusual, new, and potentially dangerous situations. The detection of those situations, which we refer to as corner cases, is highly relevant for successfully develo**, applying, and validating automotive perception functions i…
▽ More
Systems and functions that rely on machine learning (ML) are the basis of highly automated driving. An essential task of such ML models is to reliably detect and interpret unusual, new, and potentially dangerous situations. The detection of those situations, which we refer to as corner cases, is highly relevant for successfully develo**, applying, and validating automotive perception functions in future vehicles where multiple sensor modalities will be used. A complication for the development of corner case detectors is the lack of consistent definitions, terms, and corner case descriptions, especially when taking into account various automotive sensors. In this work, we provide an application-driven view of corner cases in highly automated driving. To achieve this goal, we first consider existing definitions from the general outlier, novelty, anomaly, and out-of-distribution detection to show relations and differences to corner cases. Moreover, we extend an existing camera-focused systematization of corner cases by adding RADAR (radio detection and ranging) and LiDAR (light detection and ranging) sensors. For this, we describe an exemplary toolchain for data acquisition and processing, highlighting the interfaces of the corner case detection. We also define a novel level of corner cases, the method layer corner cases, which appear due to uncertainty inherent in the methodology or the data distribution.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
SemanticVoxels: Sequential Fusion for 3D Pedestrian Detection using LiDAR Point Cloud and Semantic Segmentation
Authors:
Juncong Fei,
Wenbo Chen,
Philipp Heidenreich,
Sascha Wirges,
Christoph Stiller
Abstract:
3D pedestrian detection is a challenging task in automated driving because pedestrians are relatively small, frequently occluded and easily confused with narrow vertical objects. LiDAR and camera are two commonly used sensor modalities for this task, which should provide complementary information. Unexpectedly, LiDAR-only detection methods tend to outperform multisensor fusion methods in public be…
▽ More
3D pedestrian detection is a challenging task in automated driving because pedestrians are relatively small, frequently occluded and easily confused with narrow vertical objects. LiDAR and camera are two commonly used sensor modalities for this task, which should provide complementary information. Unexpectedly, LiDAR-only detection methods tend to outperform multisensor fusion methods in public benchmarks. Recently, PointPainting has been presented to eliminate this performance drop by effectively fusing the output of a semantic segmentation network instead of the raw image information. In this paper, we propose a generalization of PointPainting to be able to apply fusion at different levels. After the semantic augmentation of the point cloud, we encode raw point data in pillars to get geometric features and semantic point data in voxels to get semantic features and fuse them in an effective way. Experimental results on the KITTI test set show that SemanticVoxels achieves state-of-the-art performance in both 3D and bird's eye view pedestrian detection benchmarks. In particular, our approach demonstrates its strength in detecting challenging pedestrian cases and outperforms current state-of-the-art approaches.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Exploiting Multi-Layer Grid Maps for Surround-View Semantic Segmentation of Sparse LiDAR Data
Authors:
Frank Bieder,
Sascha Wirges,
Johannes Janosovits,
Sven Richter,
Zheyuan Wang,
Christoph Stiller
Abstract:
In this paper, we consider the transformation of laser range measurements into a top-view grid map representation to approach the task of LiDAR-only semantic segmentation. Since the recent publication of the SemanticKITTI data set, researchers are now able to study semantic segmentation of urban LiDAR sequences based on a reasonable amount of data. While other approaches propose to directly learn…
▽ More
In this paper, we consider the transformation of laser range measurements into a top-view grid map representation to approach the task of LiDAR-only semantic segmentation. Since the recent publication of the SemanticKITTI data set, researchers are now able to study semantic segmentation of urban LiDAR sequences based on a reasonable amount of data. While other approaches propose to directly learn on the 3D point clouds, we are exploiting a grid map framework to extract relevant information and represent them by using multi-layer grid maps. This representation allows us to use well-studied deep learning architectures from the image domain to predict a dense semantic grid map using only the sparse input data of a single LiDAR scan. We compare single-layer and multi-layer approaches and demonstrate the benefit of a multi-layer grid map input. Since the grid map representation allows us to predict a dense, 360° semantic environment representation, we further develop a method to combine the semantic information from multiple scans and create dense ground truth grids. This method allows us to evaluate and compare the performance of our models not only based on grid cells with a detection, but on the full visible measurement range.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
INTERACTION Dataset: An INTERnational, Adversarial and Cooperative moTION Dataset in Interactive Driving Scenarios with Semantic Maps
Authors:
Wei Zhan,
Liting Sun,
Di Wang,
Haojie Shi,
Aubrey Clausse,
Maximilian Naumann,
Julius Kummerle,
Hendrik Konigshof,
Christoph Stiller,
Arnaud de La Fortelle,
Masayoshi Tomizuka
Abstract:
Behavior-related research areas such as motion prediction/planning, representation/imitation learning, behavior modeling/generation, and algorithm testing, require support from high-quality motion datasets containing interactive driving scenarios with different driving cultures. In this paper, we present an INTERnational, Adversarial and Cooperative moTION dataset (INTERACTION dataset) in interact…
▽ More
Behavior-related research areas such as motion prediction/planning, representation/imitation learning, behavior modeling/generation, and algorithm testing, require support from high-quality motion datasets containing interactive driving scenarios with different driving cultures. In this paper, we present an INTERnational, Adversarial and Cooperative moTION dataset (INTERACTION dataset) in interactive driving scenarios with semantic maps. Five features of the dataset are highlighted. 1) The interactive driving scenarios are diverse, including urban/highway/ramp merging and lane changes, roundabouts with yield/stop signs, signalized intersections, intersections with one/two/all-way stops, etc. 2) Motion data from different countries and different continents are collected so that driving preferences and styles in different cultures are naturally included. 3) The driving behavior is highly interactive and complex with adversarial and cooperative motions of various traffic participants. Highly complex behavior such as negotiations, aggressive/irrational decisions and traffic rule violations are densely contained in the dataset, while regular behavior can also be found from cautious car-following, stop, left/right/U-turn to rational lane-change and cycling and pedestrian crossing, etc. 4) The levels of criticality span wide, from regular safe operations to dangerous, near-collision maneuvers. Real collision, although relatively slight, is also included. 5) Maps with complete semantic information are provided with physical layers, reference lines, lanelet connections and traffic rules. The data is recorded from drones and traffic cameras. Statistics of the dataset in terms of number of entities and interaction density are also provided, along with some utilization examples in a variety of behavior-related research areas. The dataset can be downloaded via https://interaction-dataset.com.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
