-
Circuit-centric Genetic Algorithm (CGA) for Analog and Radio-Frequency Circuit Optimization
Authors:
Mingi Kwon,
Yeonjun Lee,
Ickhyun Song
Abstract:
This paper presents an automated method for optimizing parameters in analog/high-frequency circuits, aiming to maximize performance parameters of a radio-frequency (RF) receiver. The design target includes a reduction of power consumption and noise figure and an increase in conversion gain. This study investigates the use of an artificial algorithm for the optimization of a receiver, illustrating…
▽ More
This paper presents an automated method for optimizing parameters in analog/high-frequency circuits, aiming to maximize performance parameters of a radio-frequency (RF) receiver. The design target includes a reduction of power consumption and noise figure and an increase in conversion gain. This study investigates the use of an artificial algorithm for the optimization of a receiver, illustrating how to fulfill the performance parameters with diverse circuit parameters. To overcome issues observed in the traditional Genetic Algorithm (GA), the concept of the Circuit-centric Genetic Algorithm (CGA) is proposed as a viable approach. The new method adopts an inference process that is simpler and computationally more efficient than the existing deep learning models. In addition, CGA offers significant advantages over manual design of finding optimal points and the conventional GA, mitigating the designer's workload while searching for superior optimum points.
△ Less
Submitted 18 November, 2023;
originally announced March 2024.
-
Semi-supervsied Learning-based Sound Event Detection using Freuqency Dynamic Convolution with Large Kernel Attention for DCASE Challenge 2023 Task 4
Authors:
Ji Won Kim,
Sang Won Son,
Yoonah Song,
Hong Kook Kim,
Il Hoon Song,
Jeong Eun Lim
Abstract:
This report proposes a frequency dynamic convolution (FDY) with a large kernel attention (LKA)-convolutional recurrent neural network (CRNN) with a pre-trained bidirectional encoder representation from audio transformers (BEATs) embedding-based sound event detection (SED) model that employs a mean-teacher and pseudo-label approach to address the challenge of limited labeled data for DCASE 2023 Tas…
▽ More
This report proposes a frequency dynamic convolution (FDY) with a large kernel attention (LKA)-convolutional recurrent neural network (CRNN) with a pre-trained bidirectional encoder representation from audio transformers (BEATs) embedding-based sound event detection (SED) model that employs a mean-teacher and pseudo-label approach to address the challenge of limited labeled data for DCASE 2023 Task 4. The proposed FDY with LKA integrates the FDY and LKA module to effectively capture time-frequency patterns, long-term dependencies, and high-level semantic information in audio signals. The proposed FDY with LKA-CRNN with a BEATs embedding network is initially trained on the entire DCASE 2023 Task 4 dataset using the mean-teacher approach, generating pseudo-labels for weakly labeled, unlabeled, and the AudioSet. Subsequently, the proposed SED model is retrained using the same pseudo-label approach. A subset of these models is selected for submission, demonstrating superior F1-scores and polyphonic SED score performance on the DCASE 2023 Challenge Task 4 validation dataset.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
NeBLa: Neural Beer-Lambert for 3D Reconstruction of Oral Structures from Panoramic Radiographs
Authors:
Sihwa Park,
Seongjun Kim,
Doeyoung Kwon,
Yohan Jang,
In-Seok Song,
Seung Jun Baek
Abstract:
Panoramic radiography (Panoramic X-ray, PX) is a widely used imaging modality for dental examination. However, PX only provides a flattened 2D image, lacking in a 3D view of the oral structure. In this paper, we propose NeBLa (Neural Beer-Lambert) to estimate 3D oral structures from real-world PX. NeBLa tackles full 3D reconstruction for varying subjects (patients) where each reconstruction is bas…
▽ More
Panoramic radiography (Panoramic X-ray, PX) is a widely used imaging modality for dental examination. However, PX only provides a flattened 2D image, lacking in a 3D view of the oral structure. In this paper, we propose NeBLa (Neural Beer-Lambert) to estimate 3D oral structures from real-world PX. NeBLa tackles full 3D reconstruction for varying subjects (patients) where each reconstruction is based only on a single panoramic image. We create an intermediate representation called simulated PX (SimPX) from 3D Cone-beam computed tomography (CBCT) data based on the Beer-Lambert law of X-ray rendering and rotational principles of PX imaging. SimPX aims at not only truthfully simulating PX, but also facilitates the reverting process back to 3D data. We propose a novel neural model based on ray tracing which exploits both global and local input features to convert SimPX to 3D output. At inference, a real PX image is translated to a SimPX-style image with semantic regularization, and the translated image is processed by generation module to produce high-quality outputs. Experiments show that NeBLa outperforms prior state-of-the-art in reconstruction tasks both quantitatively and qualitatively. Unlike prior methods, NeBLa does not require any prior information such as the shape of dental arches, nor the matched PX-CBCT dataset for training, which is difficult to obtain in clinical practice. Our code is available at https://github.com/sihwa-park/nebla.
△ Less
Submitted 6 February, 2024; v1 submitted 8 April, 2023;
originally announced April 2023.
-
Towards a Hybrid RF/Optical Lunar Communication System (LunarComm)
Authors:
Waseem Raza,
Ethan Abele,
John OHara,
Behnaz Sadr,
Peter LoPresti,
Ali Imran,
Wooyeol Choi,
Ickhyun Song,
Serhat Altunc,
Obadiah Kegege,
Sabit Ekin
Abstract:
The prospect of mankind returning to the Moon has garnered a great amount of attention in recent years. Dozens of lunar missions are planned for the coming decade which will require the development of a sustainable communication infrastructure with high data rates and minimal latency. Space communication systems thus far have relied on Radio Frequency (RF) links alone, but recent developments in l…
▽ More
The prospect of mankind returning to the Moon has garnered a great amount of attention in recent years. Dozens of lunar missions are planned for the coming decade which will require the development of a sustainable communication infrastructure with high data rates and minimal latency. Space communication systems thus far have relied on Radio Frequency (RF) links alone, but recent developments in laser communications have demonstrated that Free Space Optical (FSO) links can achieve much higher data rates. Upon considering the respective benefits and drawbacks of RF and FSO links, we make a case for the integration of these two technologies into a hybrid RF/FSO lunar communications architecture which leverages small satellites in a Low Earth Orbit (LEO) constellation. We include a case study for this technology designed in Analytical Graphics Systems Tool Kit (STK) software. Results are presented in terms of chain access duration, propagation delay, transmission loss, Signal-to-Noise Ratio (SNR), and Bit Error Rate (BER). This architecture shows potential to revolutionize extraterrestrial communications and pave the way for highly ambitious future missions in space.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Emulating UAV Motion by Utilizing Robotic Arm for mmWave Wireless Channel Characterization
Authors:
Amit Kachroo,
Collin A. Thornton,
Md Arifur Rahman Sarker,
Wooyeol Choi,
He Bai,
Ickhyun Song,
John O'Hara,
Sabit Ekin
Abstract:
In this paper, millimeter wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for Unmanned Aerial Vehicles (UAVs) assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dr…
▽ More
In this paper, millimeter wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for Unmanned Aerial Vehicles (UAVs) assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dryden wind model. The frequency under consideration is 28 GHz in an anechoic chamber setting. A total of 11 distance points from 3.5 feet to 23.5 feet in increments of 2 feet were considered in this experiment. At each distance point, 3 samples of data were collected for better inference purposes. In this emulated environment, it was found out that the average Doppler spread at these different distances was around -20 Hz and +20 Hz at the noise floor of -60 dB. On the other hand, the path loss exponent was found to be 1.843. This study presents and lays out a novel framework of emulating UAV motion for mmWave communication systems, which will pave the way out for future design and implementation of next generation UAV-assisted wireless communication systems.
△ Less
Submitted 21 March, 2021; v1 submitted 20 June, 2020;
originally announced June 2020.
-
Design of Anti-Jamming Waveforms for Time-Hop** Spread Spectrum Systems in Tone Jamming Environments
Authors:
Hyoyoung Jung,
Binh Van Nguyen,
Iickho Song,
Kiseon Kim
Abstract:
We consider the problem of designing waveforms for mitigating single tone jamming (STJ) signals with an estimated jamming frequency in time-hop** spread spectrum (TH SS) systems. The proposed design of waveforms optimizes the anti-jamming (AJ) performance of TH SS systems by minimizing the correlation between the template and STJ signals, in which the problem of waveform optimization is simplifi…
▽ More
We consider the problem of designing waveforms for mitigating single tone jamming (STJ) signals with an estimated jamming frequency in time-hop** spread spectrum (TH SS) systems. The proposed design of waveforms optimizes the anti-jamming (AJ) performance of TH SS systems by minimizing the correlation between the template and STJ signals, in which the problem of waveform optimization is simplified by employing a finite number of rectangular pulses. The simplification eventually makes the design of waveforms be converted into a problem of finding eigenvalues and eigenvectors of a matrix. Simulation results show that the waveforms designed by the proposed scheme provide us with
performance superior not only to the conventional waveforms but also to the clipper receiver in the mitigation of STJ. The waveforms from the proposed design also exhibit a desirable AJ capability even when the estimated frequency of the STJ is not perfect.
△ Less
Submitted 24 November, 2019;
originally announced November 2019.
-
Range-Spread Targets Detection in Unknown Doppler Shift via Semi-Definite Programming
Authors:
Mai. P. T. Nguyen,
I. Song,
S. Lee,
S. Yoon
Abstract:
Based on the technique of generalized likelihood ratio test, we address detection schemes for Doppler-shifted range-spread targets in Gaussian noise. First, a detection scheme is derived by solving the maximization associated with the estimation of unknown Doppler frequency with semi-definite programming. To lower the computational complexity of the detector, we then consider a simplification of t…
▽ More
Based on the technique of generalized likelihood ratio test, we address detection schemes for Doppler-shifted range-spread targets in Gaussian noise. First, a detection scheme is derived by solving the maximization associated with the estimation of unknown Doppler frequency with semi-definite programming. To lower the computational complexity of the detector, we then consider a simplification of the detector by adopting maximization over a relaxed space. Both of the proposed detectors are shown to have constant false alarm rate via numerical or theoretical analysis. The detection performance of the proposed detector based on the semi-definite programming is shown to be almost the same as that of the conventional detector designed for known Doppler frequency.
△ Less
Submitted 8 October, 2017;
originally announced October 2017.
-
Robust Radar Detection of a Mismatched Steering Vector Embedded in Compound Gaussian Clutter
Authors:
Mai P. T. Nguyen,
I. Song
Abstract:
The problem of radar detection in compound Gaussian clutter when a radar signature is not completely known has not been considered yet and is addressed in this paper. We proposed a robust technique to detect, based on the generalized likelihood ratio test, a point-like target embedded in compound Gaussian clutter. Employing an array of antennas, we assume that the actual steering vector departs fr…
▽ More
The problem of radar detection in compound Gaussian clutter when a radar signature is not completely known has not been considered yet and is addressed in this paper. We proposed a robust technique to detect, based on the generalized likelihood ratio test, a point-like target embedded in compound Gaussian clutter. Employing an array of antennas, we assume that the actual steering vector departs from the nominal one, but lies in a known interval. The detection is then secured by employing a semi-definite programming. It is confirmed via simulation that the proposed detector experiences a negligible detection loss compared to an adaptive normalized matched filter in a perfectly matched case, but outperforms in cases of mismatched signal. Remarkably, the proposed detector possesses constant false alarm rate with respect to the clutter covariance matrix.
△ Less
Submitted 7 October, 2017;
originally announced October 2017.