Showing 1–7 of 7 results for author: Smith, D R

Simultaneous Transmitting and Reflecting (STAR)-RIS for Harmonious Millimeter Wave Spectrum Sharing

Authors: Omar Hashash, Walid Saad, Mohammadreza F. Imani, David R. Smith

Abstract: The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challeng… ▽ More The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spectrum sharing demands. In this paper, a novel simultaneous transmitting and reflecting RIS (STAR-RIS)-aided solution to enable mmWave spectrum sharing is proposed. In particular, the transmitting and reflecting abilities of the STAR-RIS are leveraged to tackle the mmWave spectrum sharing and QoS requirements separately. The STAR-RIS-enabled spectrum sharing problem between a primary network (e.g. a radar transmit-receive pair) and a secondary network is formulated as an optimization problem whose goal is to maximize the downlink sum-rate over a secondary multiple-input-single-output (MISO) network, while limiting interference over a primary network. Moreover, the STAR-RIS response coefficients and beamforming matrix in the secondary network are jointly optimized. To solve this non-convex problem, an alternating iterative algorithm is employed, where the STAR-RIS response coefficients and beamforming matrix are obtained using the successive convex approximation method. Simulation results show that the proposed solution outperforms conventional RIS schemes for mmWave spectrum sharing by achieving a 14.57% spectral efficiency gain. △ Less

Submitted 25 January, 2023; originally announced January 2023.

An Integrated, Phase-Controlled Power Divider for Metasurface Array Antennas

Authors: Deepayan Banerjee, Aaron V. Diebold, David R. Smith, Michael Boyarsky

Abstract: We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch wav… ▽ More We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch waveguide with equal power. Further, the power divider must also apply a prescribed phase shift to each branch waveguide to mitigate metasurface-specific grating lobes. The presented design features hollow metal waveguides, with a conducting sheet patterned with metamaterial irises serving as the upper wall. A single hollow metal main waveguide feed is used to couple power to each of the branch waveguide. Carefully oriented slots control both the magnitude and phase of the field distributed from the main feed to each branch. All waveguides can be machined from a single block of metal, with a metamaterial-patterned printed circuit board laminated to the top of the assembly. The resulting design is mechanically robust and capable of high power operation while retaining the low-cost, low-power consumption, lightweight, and low-profile features common in metasurface antenna designs. △ Less

Submitted 11 July, 2022; originally announced August 2022.

Design of Conformal Array of Rectangular Waveguide-fed Metasurfaces

Authors: Insang Yoo, David R. Smith

Abstract: We present a systematic design method for a cylindrical conformal array of rectangular waveguide-fed metasurfaces. The conformal metasurface consists of multiple curved rectangular waveguides loaded with metamaterial elements\textemdash electrically small irises\textemdash inserted into the upper conducting walls of the waveguides. Each element radiates energy into free space to contribute to an o… ▽ More We present a systematic design method for a cylindrical conformal array of rectangular waveguide-fed metasurfaces. The conformal metasurface consists of multiple curved rectangular waveguides loaded with metamaterial elements\textemdash electrically small irises\textemdash inserted into the upper conducting walls of the waveguides. Each element radiates energy into free space to contribute to an overall radiation pattern. Thus, the geometry or electrical configuration of each of the individual metamaterial elements needs to be tailored to generate a desired pattern. In general, due to difficulties in modeling the effect of curvature, the design of conformal metasurface arrays has relied on full-wave simulations or experiments. In this study, we propose a design method utilizing the analytic model of a planar metasurface accounting for metamaterial elements' locations and orientations over a surface with curvature. Although approximate, we demonstrate that such an alteration along with the framework of dipolar modeling of planar elements can be used for the analysis of conformal arrays with small curvature. We then design a conformal array metasurface using the method combined with CMA-ES optimizer. Through numerical simulations, we confirm the validity of the proposed design method. Applications include the design of metasurfaces for radar, communications, and imaging systems for automobiles and airplanes. △ Less

Submitted 27 August, 2021; originally announced September 2021.

Holographic Metasurface Antennas for Uplink Massive MIMO Systems

Authors: Insang Yoo, David R. Smith

Abstract: We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a h… ▽ More We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a holographic solution for the guided (or reference) mode, generating a fan beam towards a prescribed direction, thereby forming a multibeam antenna system. We demonstrate that a narrowband uplink massive MIMO system using the metasurfaces can achieve the sum capacity close to that offered by the Rayleigh channel at 3.5 GHz. We show that metasurfaces supporting multiple fan beams can achieve high spatial resolution in the azimuth directions in sub-6 GHz channels, and thereby form uncorrelated MIMO channels between the base station and users. Also, the proposed metasurface antenna is structurally simple, low-cost, and efficient, and thus is suitable to alleviate RF hardware issues common to massive MIMO systems equipped with a large antenna system. △ Less

Submitted 27 August, 2021; originally announced August 2021.

Dynamic Metasurface Antennas for 6G Extreme Massive MIMO Communications

Authors: Nir Shlezinger, George C. Alexandropoulos, Mohammadreza F. Imani, Yonina C. Eldar, David R. Smith

Abstract: Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in t… ▽ More Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in sha** the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their effect on the ability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers. △ Less

Submitted 16 June, 2020; v1 submitted 14 June, 2020; originally announced June 2020.

Dynamic Metasurface Antennas for MIMO-OFDM Receivers with Bit-Limited ADCs

Authors: Hanqing Wang, Nir Shlezinger, Yonina C. Eldar, Shi **, Mohammadreza F. Imani, Insang Yoo, David R. Smith

Abstract: The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in… ▽ More The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implement controllable compression in acquisition. In this work we study the application of DMAs for MIMO-OFDM receivers operating with bit-constrained analog-to-digital converters (ADCs). We present a model for DMAs which accounts for the configurable frequency selective profile of its metamaterial elements, resulting in a spectrally flexible hybrid structure. We then exploit previous results in task-based quantization to show how DMAs can be configured to improve recovery in the presence of constrained ADCs, and propose methods for adjusting the DMA parameters based on channel state information. Our numerical results demonstrate that the DMA-based receiver is capable of accurately recovering OFDM signals. In particular, we show that by properly exploiting the spectral diversity of DMAs, notable performance gains are obtained over existing designs of conventional hybrid architectures, demonstrating the potential of DMAs for MIMO-OFDM setups in realizing high performance massive antenna arrays of reduced cost and power consumption. △ Less

Submitted 14 December, 2019; originally announced December 2019.

Implementation and Characterization of a Two-Dimensional Printed Circuit Dynamic Metasurface Aperture for Computational Microwave Imaging

Authors: Timothy Sleasman, Mohammadreza F. Imani, Aaron V. Diebold, Michael Boyarsky, Kenneth P. Trofatter, David R. Smith

Abstract: We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circui… ▽ More We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circuit board process. The design considerations for the metamaterial element as a tunable radiator, the associated biasing circuitry, as well as cavity parameters are examined and discussed. A sensing matrix can be constructed from the measured transmit patterns, the singular value spectrum of which provides insight into the information capacity of the apertures. We investigate the singular value spectra of the sensing matrix over a variety of operating parameters, such as the number of metamaterial elements, number of masks, and number of radiating elements. After optimizing over these key parameters, we demonstrate computational microwave imaging of simple test objects. △ Less

Submitted 20 October, 2019; originally announced November 2019.