-
Integrated SWIPT Receiver with Memory Effects: Circuit Analysis and Information Detection
Authors:
Eleni Demarchou,
Zulqarnain Bin Ashraf,
Dieff Vital,
Besma Smida,
Constantinos Psomas,
Ioannis Krikidis
Abstract:
Wireless power transfer has been proposed as a key technology for the foreseen machine type networks. A main challenge in the research community lies in acquiring a simple yet accurate model to capture the energy harvesting performance. In this work, we focus on a half-wave rectifier and based on circuit analysis we provide the actual output of the circuit which accounts for the memory introduced…
▽ More
Wireless power transfer has been proposed as a key technology for the foreseen machine type networks. A main challenge in the research community lies in acquiring a simple yet accurate model to capture the energy harvesting performance. In this work, we focus on a half-wave rectifier and based on circuit analysis we provide the actual output of the circuit which accounts for the memory introduced by the capacitor. The provided expressions are also validated through circuit simulations on ADS. Then, the half-wave rectifier is used as an integrated simultaneous wireless information and power transfer receiver where the circuit's output is used for decoding information based on amplitude modulation. We investigate the bit error rate performance based on two detection schemes: (i) symbol-by-symbol maximum likelihood (ML); and (ii) ML sequence detection (MLSD). We show that the symbol period is critical due to the intersymbol interference induced by circuit. Our results reveal that MLSD is necessary towards improving the error probability and achieving higher data rates.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Multi-Target Two-way Integrated Sensing and Communications with Full Duplex MIMO Radios
Authors:
Muhammad Talha,
Besma Smida,
Md Atiqul Islam,
George C. Alexandropoulos
Abstract:
In this paper, we propose a multiple input multiple output (MIMO) Full-Duplex Integrated Sensing and Communication System consisting of multiple targets, a single downlink, and a single uplink user. We employed signal-to-interference plus noise ratio (SINR) as the performance metric for radar, downlink, and uplink communication. We use a communication-centric approach in which communication wavefo…
▽ More
In this paper, we propose a multiple input multiple output (MIMO) Full-Duplex Integrated Sensing and Communication System consisting of multiple targets, a single downlink, and a single uplink user. We employed signal-to-interference plus noise ratio (SINR) as the performance metric for radar, downlink, and uplink communication. We use a communication-centric approach in which communication waveform is used for both communication and sensing of the environment. We develop a sensing algorithm capable of estimating the direction of arrival (DoA), range, and velocity of each target. We also propose a joint optimization framework for designing A/D transmit and receive beamformers to improve radar, downlink, and uplink SINRs while minimizing self-interference (SI) leakage. We also propose a null space projection (NSP) based approach to improve the uplink rate. Our simulation results, considering orthogonal frequency division multiplexing (OFDM) waveform, show accurate radar parameter estimation with improved downlink and uplink rate.
△ Less
Submitted 16 December, 2023;
originally announced December 2023.
-
Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges
Authors:
Besma Smida,
Ashutosh Sabharwal,
Gabor Fodor,
George C. Alexandropoulos,
Himal A. Suraweera,
Chan-Byoung Chae
Abstract:
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band F…
▽ More
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.
△ Less
Submitted 24 April, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Full Duplex Holographic MIMO for Near-Field Integrated Sensing and Communications
Authors:
Ioannis Gavras,
Md Atiqul Islam,
Besma Smida,
George C. Alexandropoulos
Abstract:
This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies,…
▽ More
This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies, the FD node adopts dynamic metasurface antenna panels for both transmission and reception, which consist of massive numbers of sub-wavelength-spaced metamaterials, enabling reduced cost and power consumption analog precoding and combining. We devise an optimization framework for the FD node's reconfigurable parameters with the dual objective of maximizing the targets' parameters estimation accuracy and the downlink communication performance. Our simulation results verify the integrated sensing and communications capability of the proposed FD holographic MIMO system, showcasing the interplays among its various design parameters.
△ Less
Submitted 7 August, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Simultaneous Multi-User MIMO Communications and Multi-Target Tracking with Full Duplex Radios
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
In this paper, we present an Integrated Sensing and Communications (ISAC) system enabled by in-band Full Duplex (FD) radios, where a massive Multiple-Input Multiple-Output (MIMO) base station equipped with hybrid Analog and Digital (A/D) beamformers is communicating with multiple DownLink (DL) users, and simultaneously estimates via the same signaling waveforms the Direction of Arrival (DoA) as we…
▽ More
In this paper, we present an Integrated Sensing and Communications (ISAC) system enabled by in-band Full Duplex (FD) radios, where a massive Multiple-Input Multiple-Output (MIMO) base station equipped with hybrid Analog and Digital (A/D) beamformers is communicating with multiple DownLink (DL) users, and simultaneously estimates via the same signaling waveforms the Direction of Arrival (DoA) as well as the range of radar targets randomly distributed within its coverage area. Capitalizing on a recent reduced-complexity FD hybrid A/D beamforming architecture, we devise a joint radar target tracking and DL data transmission protocol. An optimization framework for the joint design of the massive A/D beamformers and the Self-Interference (SI) cancellation unit, with the dual objective of maximizing the radar tracking accuracy and DL communication performance, is presented. Our simulation results at millimeter wave frequencies using 5G NR wideband waveforms, showcase the accuracy of the radar target tracking performance of the proposed system, which simultaneously offers increased sum rate compared with benchmark schemes.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Full Duplex Massive MIMO Architectures: Recent Advances, Applications, and Future Directions
Authors:
George C. Alexandropoulos,
Md Atiqul Islam,
Besma Smida
Abstract:
The increasingly demanding objectives for next generation wireless communications have spurred recent research activities on multi-antenna transceiver hardware architectures and relevant intelligent communication schemes. Among them belong the Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) architectures, which offer the potential for simultaneous uplink and downlink operations in the entir…
▽ More
The increasingly demanding objectives for next generation wireless communications have spurred recent research activities on multi-antenna transceiver hardware architectures and relevant intelligent communication schemes. Among them belong the Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) architectures, which offer the potential for simultaneous uplink and downlink operations in the entire frequency band. However, as the number of antenna elements increases, the interference signal leaking from the transmitter of the FD radio to its receiver becomes more severe. In this article, we present a unified FD massive MIMO architecture comprising analog and digital transmit and receive BeamForming (BF), as well as analog and digital SI cancellation, which can be jointly optimized for various performance objectives and complexity requirements. Performance evaluation results for applications of the proposed architecture to fully digital and hybrid analog and digital BF operations using recent algorithmic designs, as well as simultaneous communication of data and control signals are presented. It is shown that the proposed architecture, for both small and large numbers of antennas, enables improved spectral efficiency FD communications with fewer analog cancellation elements compared to various benchmark schemes. The article is concluded with a list of open challenges and research directions for future FD massive MIMO communication systems and their promising applications.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Integrated Sensing and Communication with Millimeter Wave Full Duplex Hybrid Beamforming
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
Integrated Sensing and Communication (ISAC) has attracted substantial attraction in recent years for spectral efficiency improvement, enabling hardware and spectrum sharing for simultaneous sensing and signaling operations. In-band Full Duplex (FD) is being considered as a key enabling technology for ISAC applications due to its simultaneous transmission and reception capability. In this paper, we…
▽ More
Integrated Sensing and Communication (ISAC) has attracted substantial attraction in recent years for spectral efficiency improvement, enabling hardware and spectrum sharing for simultaneous sensing and signaling operations. In-band Full Duplex (FD) is being considered as a key enabling technology for ISAC applications due to its simultaneous transmission and reception capability. In this paper, we present an FD-based ISAC system operating at millimeter Wave (mmWave) frequencies, where a massive Multiple-Input Multiple-Output (MIMO) Base Station (BS) node employing hybrid Analog and Digital (A/D) beamforming is communicating with a DownLink (DL) multi-antenna user and the same waveform is utilized at the BS receiver for sensing the radar targets in its coverage environment. We develop a sensing algorithm that is capable of estimating Direction of Arrival (DoA), range, and relative velocity of the radar targets. A joint optimization framework for designing the A/D transmit and receive beamformers as well as the Self-Interference (SI) cancellation is presented with the objective to maximize the achievable DL rate and the accuracy of the radar target sensing performance. Our simulation results, considering fifth Generation (5G) Orthogonal Frequency Division Multiplexing (OFDM) waveforms, verify our approach's high precision in estimating DoA, range, and velocity of multiple radar targets, while maximizing the DL communication rate.
△ Less
Submitted 13 January, 2022;
originally announced January 2022.
-
Joint Analog and Digital Transceiver Design for Wideband Full Duplex MIMO Systems
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
In this paper, we propose a wideband Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) communication system comprising of an FD MIMO node simultaneously communicating with two multi-antenna UpLink (UL) and DownLink (DL) nodes utilizing the same time and frequency resources. To suppress the strong Self-Interference (SI) signal due to simultaneous transmission and reception in FD MIMO systems,…
▽ More
In this paper, we propose a wideband Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) communication system comprising of an FD MIMO node simultaneously communicating with two multi-antenna UpLink (UL) and DownLink (DL) nodes utilizing the same time and frequency resources. To suppress the strong Self-Interference (SI) signal due to simultaneous transmission and reception in FD MIMO systems, we propose a joint design of Analog and Digital (A/D) cancellation as well as transmit and receive beamforming capitalizing on baseband Orthogonal Frequency-Division Multiplexing (OFDM) signal modeling. Considering practical transmitter impairments, we present a multi-tap wideband analog canceller architecture whose number of taps does not scale with the number of transceiver antennas and multipath SI components. We also propose a novel adaptive digital cancellation based on truncated singular value decomposition that reduces the residual SI signal estimation parameters. To maximize the FD sum rate, a joint optimization framework is presented for A/D cancellation and digital beamforming. Finally, our extensive waveform simulation results demonstrate that the proposed wideband FD MIMO design exhibits higher SI cancellation capability with reduced complexity compared to existing cancellation techniques, resulting in improved achievable rate performance.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Direction-Assisted Beam Management in Full Duplex Millimeter Wave Massive MIMO Systems
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
Recent applications of the Full Duplex (FD) technology focus on enabling simultaneous control communication and data transmission to reduce the control information exchange overhead, which impacts end-to-end latency and spectral efficiency. In this paper, we present a simultaneous direction estimation and data transmission scheme for millimeter Wave (mmWave) massive Multiple-Input Multiple-Output…
▽ More
Recent applications of the Full Duplex (FD) technology focus on enabling simultaneous control communication and data transmission to reduce the control information exchange overhead, which impacts end-to-end latency and spectral efficiency. In this paper, we present a simultaneous direction estimation and data transmission scheme for millimeter Wave (mmWave) massive Multiple-Input Multiple-Output (MIMO) systems, enabled by a recent FD MIMO technology with reduced hardware complexity Self-Interference (SI) cancellation. We apply the proposed framework in the mmWave analog beam management problem, considering a base station equipped with a large transmit antenna array realizing downlink analog beamforming and few digitally controlled receive antenna elements used for uplink Direction-of-Arrival (DoA) estimation. A joint optimization framework for designing the DoA-assisted analog beamformer and the analog as well as digital SI cancellation is presented with the objective to maximize the achievable downlink rate. Our simulation results showcase that the proposed scheme outperforms its conventional half-duplex counterpart, yielding reduced DoA estimation error and superior downlink data rate.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Simultaneous Downlink Data Transmission and Uplink Channel Estimation with Reduced Complexity Full Duplex MIMO Radios
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
In this paper, we study Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) radios for simultaneous data communication and control information exchange. Capitalizing on a recently proposed FD MIMO architecture combining digital transmit and receive beamforming with reduced complexity multi-tap analog Self-Interference (SI) cancellation, we propose a novel transmission scheme exploiting channel…
▽ More
In this paper, we study Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) radios for simultaneous data communication and control information exchange. Capitalizing on a recently proposed FD MIMO architecture combining digital transmit and receive beamforming with reduced complexity multi-tap analog Self-Interference (SI) cancellation, we propose a novel transmission scheme exploiting channel reciprocity for joint downlink beamformed information data communication and uplink channel estimation through training data transmission. We adopt a general model for pilot-assisted channel estimation and present a unified optimization framework for all involved FD MIMO design parameters. Our representative Monte Carlo simulation results for an example algorithmic solution for the beamformers as well as for the analog and digital SI cancellation demonstrate that the proposed FD-based joint communication and control scheme provides 1.4x the downlink rate of its half duplex counterpart. This performance improvement is achieved with 50% reduction in the hardware complexity for the analog canceller than conventional FD MIMO architectures with fully connected analog cancellation.
△ Less
Submitted 14 March, 2020;
originally announced March 2020.
-
Full Duplex Hybrid A/D Beamforming with Reduced Complexity Multi-Tap Analog Cancellation
Authors:
George C. Alexandropoulos,
Md Atiqul Islam,
Besma Smida
Abstract:
Although the hardware complexity of the analog self-interference canceller in full duplex Multiple Input Multiple Output (MIMO) designs does not necessarily scale with the number of transceiver antennas, exploiting the benefits of analog cancellation in massive MIMO systems with hundreds of antenna elements is still quite impractical. Hybrid Analog and Digital (A/D) beamforming architectures have…
▽ More
Although the hardware complexity of the analog self-interference canceller in full duplex Multiple Input Multiple Output (MIMO) designs does not necessarily scale with the number of transceiver antennas, exploiting the benefits of analog cancellation in massive MIMO systems with hundreds of antenna elements is still quite impractical. Hybrid Analog and Digital (A/D) beamforming architectures have been lately considered as a candidate technology for realizing massive MIMO transceivers with very large number of antenna elements, but with much fewer numbers of Radio Frequency (RF) chains. In this paper, we present a novel architecture for full duplex hybrid A/D beamforming transceivers including multi-tap analog cancellation with reduced number of taps and simple multiplexers for efficient signal routing among the transceiver RF chains. Capitalizing on the proposed transceiver architecture, we present a joint design of analog cancellation and A/D beamforming with the objective to maximize the achievable full duplex rate performance. Representative millimeter wave simulation results demonstrate the effectiveness of the proposed architecture and algorithmic framework for enabling simultaneous uplink and downlink communications with reduced complexity analog self-interference cancellation.
△ Less
Submitted 4 May, 2020; v1 submitted 26 February, 2020;
originally announced February 2020.
-
Non Cooperative Game Theoretic Approach for Residential Energy Management in Smart Grid
Authors:
Ilyes Naidji,
Moncef Ben Smida,
Mohamed Khalgui,
Abdelmalik Bachir
Abstract:
Demand side management (DSM) is one of the main functionalities of the smart grid as it allows the consumer to adjust its energy consumption for an efficient energy management. Most of the existing DSM techniques aim at minimizing the energy cost while not considering the comfort of consumers. Therefore, maintaining a trade-off between these two conflicting objectives is still a challenging task.…
▽ More
Demand side management (DSM) is one of the main functionalities of the smart grid as it allows the consumer to adjust its energy consumption for an efficient energy management. Most of the existing DSM techniques aim at minimizing the energy cost while not considering the comfort of consumers. Therefore, maintaining a trade-off between these two conflicting objectives is still a challenging task. This paper proposes a novel DSM approach for residential consumers based on a non-cooperative game theoretic approach, where each player is encouraged to reshape its electricity consumption pattern through the dynamic pricing policy applied by the smart grid operator. The players are guided to select the best strategy that consists of scheduling their electric appliances in order to minimize the daily energy cost and their discomfort level. The Nash Equilibrium of the energy management game is achieved using Non-Sorting Genetic Algorithm NSGA-II. Simulation results show the effectiveness of the distributed non cooperative game approach for the residential energy management problem where an appreciable energy cost reduction is reached while maintaining the discomfort in an acceptable level.
△ Less
Submitted 23 August, 2019;
originally announced August 2019.
-
A Unified Beamforming and A/D Self-Interference Cancellation Design for Full Duplex MIMO Radios
Authors:
Md Atiqul Islam,
George C. Alexandropoulos,
Besma Smida
Abstract:
In this paper, we focus on reduced complexity full duplex Multiple-Input Multiple-Output (MIMO) systems and present a joint design of digital transmit and receive beamforming with Analog and Digital (A/D) self-interference cancellation. We capitalize on a recently proposed multi-tap analog canceller architecture, whose number of taps does not scale with the number of transceiver antennas, and cons…
▽ More
In this paper, we focus on reduced complexity full duplex Multiple-Input Multiple-Output (MIMO) systems and present a joint design of digital transmit and receive beamforming with Analog and Digital (A/D) self-interference cancellation. We capitalize on a recently proposed multi-tap analog canceller architecture, whose number of taps does not scale with the number of transceiver antennas, and consider practical transmitter impairments for the full duplex operation. Particularly, transmitter IQ imbalance and nonlinear power amplification are assumed via relevant realistic models. Aiming at suppressing the residual linear and nonlinear self-interference signal below the noise floor, we propose a novel digital self-interference cancellation technique that is jointly designed with the configuration of the analog taps and digital beamformers. Differently from the state of the art, we design pilot-assisted estimation of all involved wireless channels. Our representative Monte Carlo simulation results demonstrate that our unified full duplex MIMO design exhibits higher self-interference cancellation capability with less analog taps compared to available techniques, which results in improved achievable rate and bit error performance.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
A Comprehensive Self-interference Model for Single-antenna Full-duplex Communication Systems
Authors:
Md Atiqul Islam,
Besma Smida
Abstract:
Single-antenna full-duplex communication technology has the potential to substantially increase spectral efficiency. However, limited propagation domain cancellation of single-antenna system results in a higher impact of receiver chain nonlinearities on the residual self-interference (SI) signal. In this paper, we offer a comprehensive SI model for single-antenna full-duplex systems based on direc…
▽ More
Single-antenna full-duplex communication technology has the potential to substantially increase spectral efficiency. However, limited propagation domain cancellation of single-antenna system results in a higher impact of receiver chain nonlinearities on the residual self-interference (SI) signal. In this paper, we offer a comprehensive SI model for single-antenna full-duplex systems based on direct-conversion transceiver structure considering nonlinearities of all the transceiver radio frequency (RF) components, in-phase/quadrature (IQ) imbalances, phase noise effect, and receiver noise figure. To validate our model, we also propose a more appropriate digital SI cancellation approach considering receiver chain RF and baseband nonlinearities. The proposed technique employs orthogonalization of the design matrix using QR decomposition to alleviate the estimation and cancellation error. Finally, through circuit-level waveform simulation, the performance of the digital cancellation strategy is investigated, which achieves 20 dB more cancellation compared to existing methods.
△ Less
Submitted 12 June, 2019;
originally announced June 2019.
