Showing 1–5 of 5 results for author: Schulthess, L

A LoRa-based Energy-efficient Sensing System for Urban Data Collection

Authors: Lukas Schulthess, Tiago Salzmann, Christian Vogt, Michele Magno

Abstract: Nowadays, cities provide much more than shop** opportunities or working spaces. Individual locations such as parks and squares are used as meeting points and local recreation areas by many people. To ensure that they remain attractive in the future, the design of such squares must be regularly adapted to the needs of the public. These utilization trends can be derived using public data collectio… ▽ More Nowadays, cities provide much more than shop** opportunities or working spaces. Individual locations such as parks and squares are used as meeting points and local recreation areas by many people. To ensure that they remain attractive in the future, the design of such squares must be regularly adapted to the needs of the public. These utilization trends can be derived using public data collection. The more diverse and rich the data sets are, the easier it is to optimize public space design through data analysis. Traditional data collection methods such as questionnaires, observations, or videos are either labor intensive or cannot guarantee to preserve the individual's privacy. This work presents a privacy-preserving, low-power, and low-cost smart sensing system that is capable of anonymously collecting data about public space utilization by analyzing the occupancy distribution of public seating. To support future urban planning the sensor nodes are capable of monitoring environmental noise, chair utilization, and their position, temperature, and humidity and provide them over a city-wide Long Range Wide Area Network (LoRaWAN). The final sensing system's robust operation is proven in a trial run at two public squares in a city with 16 sensor nodes over a duration of two months. By consuming 33.65 mWh per day with all subsystems enabled, including sitting detection based on a continuous acceleration measurement operating on a robust and simple threshold algorithm, the custom-designed sensor node achieves continuous monitoring during the 2-month trial run. The evaluation of the experimental results clearly shows how the two locations are used, which confirms the practicability of the proposed solution. All data collected during the field trial is publicly available as open data. △ Less

Submitted 10 June, 2024; originally announced June 2024.

A Lora-Based and Maintenance-Free Cattle Monitoring System for Alpine Pastures and Remote Locations

Authors: Lukas Schulthess, Fabrice Longchamp, Christian Vogt, Michele Magno

Abstract: The advent of the Internet of Things (IoT) is boosting the proliferation of sensors and smart devices in industry and daily life. Continuous monitoring IoT systems are also finding applications in agriculture, particularly in the realm of smart farming. The adoption of wearable sensors to record the activity of livestock has garnered increasing interest. Such a device enables farmers to locate, mo… ▽ More The advent of the Internet of Things (IoT) is boosting the proliferation of sensors and smart devices in industry and daily life. Continuous monitoring IoT systems are also finding applications in agriculture, particularly in the realm of smart farming. The adoption of wearable sensors to record the activity of livestock has garnered increasing interest. Such a device enables farmers to locate, monitor, and constantly assess the health status of their cattle more efficiently and effectively, even in challenging terrain and remote locations. This work presents a maintenance-free and robust smart sensing system that is capable of tracking cattle in remote locations and collecting activity parameters, such as the individual's grazing- and resting time. To support the paradigm of smart farming, the cattle tracker is capable of monitoring the cow's activity by analyzing data from an accelerometer, magnetometer, temperature sensor, and Global Navigation Satellite System (GNSS) module, providing them over Long Range Wide Area Network (LoRaWAN) to a backend server. By consuming 511.9 J per day with all subsystems enabled and a data transmission every 15 minutes, the custom-designed sensor node achieves a battery lifetime of 4 months. When exploiting the integrated solar energy harvesting subsystem, this can be even increased by 40% to up to 6 months. The final sensing system's robust operation is proven in a trial run with two cows on a pasture for over three days. Evaluations of the experimental results clearly show behavior patterns, which confirms the practicability of the proposed solution. △ Less

Submitted 10 June, 2024; originally announced June 2024.

A Passive and Asynchronous Wake-up Receiver for Acoustic Underwater Communication

Authors: Lukas Schulthess, Philipp Mayer, Luca Benini, Michele Magno

Abstract: Establishing reliable data exchange in an underwater domain using energy and power-efficient communication methods is crucial and challenging. Radio frequencies are absorbed by the salty and mineral-rich water and optical signals are obstructed and scattered after short distances. In contrast, acoustic communication benefits from low absorption and enables communication over long distances. Underw… ▽ More Establishing reliable data exchange in an underwater domain using energy and power-efficient communication methods is crucial and challenging. Radio frequencies are absorbed by the salty and mineral-rich water and optical signals are obstructed and scattered after short distances. In contrast, acoustic communication benefits from low absorption and enables communication over long distances. Underwater communication must match low power and energy requirements as underwater sensor systems must have a long battery lifetime and need to work reliably due to their deployment and maintenance cost. For long-term deployments, the sensors' overall power consumption is determined by the power consumption during idle state. It can be reduced by integrating asynchronous always-on wake-up circuits with nano-watt power consumption. However, this approach does reduce but not eliminate idle power consumption, leaving a margin for improvement. This paper presents a passive and asynchronous wake-up receiver for acoustic underwater communication enabling zero-power always-on listening. Zero-power listening is achieved by combining energy and information transmission using a low-power wake-up receiver that extracts energy out of the acoustic signal and eliminates radio frontend idle consumption. In-field evaluations demonstrate that the wake-up circuit requires only 63 uW to detect and compare an 8-bit UUID at a data rate of 200 bps up to a distance of 5 m and that the needed energy can directly be extracted from the acoustic signal. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Skilog: A Smart Sensor System for Performance Analysis and Biofeedback in Ski Jum**

Authors: Lukas Schulthess, Thorir Mar Ingolfsson, Marc Nölke, Michele Magno, Luca Benini, Christoph Leitner

Abstract: In ski jum**, low repetition rates of jumps limit the effectiveness of training. Thus, increasing learning rate within every single jump is key to success. A critical element of athlete training is motor learning, which has been shown to be accelerated by feedback methods. In particular, a fine-grained control of the center of gravity in the in-run is essential. This is because the actual takeof… ▽ More In ski jum**, low repetition rates of jumps limit the effectiveness of training. Thus, increasing learning rate within every single jump is key to success. A critical element of athlete training is motor learning, which has been shown to be accelerated by feedback methods. In particular, a fine-grained control of the center of gravity in the in-run is essential. This is because the actual takeoff occurs within a blink of an eye ($\sim$300ms), thus any unbalanced body posture during the in-run will affect flight. This paper presents a smart, compact, and energy-efficient wireless sensor system for real-time performance analysis and biofeedback during ski jum**. The system operates by gauging foot pressures at three distinct points on the insoles of the ski boot at 100Hz. Foot pressure data can either be directly sent to coaches to improve their feedback, or fed into a ML model to give athletes instantaneous in-action feedback using a vibration motor in the ski boot. In the biofeedback scenario, foot pressures act as input variables for an optimized XGBoost model. We achieve a high predictive accuracy of 92.7% for center of mass predictions (dorsal shift, neutral stand, ventral shift). Subsequently, we parallelized and fine-tuned our XGBoost model for a RISC-V based low power parallel processor (GAP9), based on the PULP architecture. We demonstrate real-time detection and feedback (0.0109ms/inference) using our on-chip deployment. The proposed smart system is unobtrusive with a slim form factor (13mm baseboard, 3.2mm antenna) and a lightweight build (26g). Power consumption analysis reveals that the system's energy-efficient design enables sustained operation over multiple days (up to 300 hours) without requiring recharge. △ Less

Submitted 25 September, 2023; originally announced September 2023.

Comments: 5 pages, 2 tables, 4 figure, Accepted at IEEE BioCAS 2023

ColibriUAV: An Ultra-Fast, Energy-Efficient Neuromorphic Edge Processing UAV-Platform with Event-Based and Frame-Based Cameras

Authors: Sizhen Bian, Lukas Schulthess, Georg Rutishauser, Alfio Di Mauro, Luca Benini, Michele Magno

Abstract: The interest in dynamic vision sensor (DVS)-powered unmanned aerial vehicles (UAV) is raising, especially due to the microsecond-level reaction time of the bio-inspired event sensor, which increases robustness and reduces latency of the perception tasks compared to a RGB camera. This work presents ColibriUAV, a UAV platform with both frame-based and event-based cameras interfaces for efficient per… ▽ More The interest in dynamic vision sensor (DVS)-powered unmanned aerial vehicles (UAV) is raising, especially due to the microsecond-level reaction time of the bio-inspired event sensor, which increases robustness and reduces latency of the perception tasks compared to a RGB camera. This work presents ColibriUAV, a UAV platform with both frame-based and event-based cameras interfaces for efficient perception and near-sensor processing. The proposed platform is designed around Kraken, a novel low-power RISC-V System on Chip with two hardware accelerators targeting spiking neural networks and deep ternary neural networks.Kraken is capable of efficiently processing both event data from a DVS camera and frame data from an RGB camera. A key feature of Kraken is its integrated, dedicated interface with a DVS camera. This paper benchmarks the end-to-end latency and power efficiency of the neuromorphic and event-based UAV subsystem, demonstrating state-of-the-art event data with a throughput of 7200 frames of events per second and a power consumption of 10.7 \si{\milli\watt}, which is over 6.6 times faster and a hundred times less power-consuming than the widely-used data reading approach through the USB interface. The overall sensing and processing power consumption is below 50 mW, achieving latency in the milliseconds range, making the platform suitable for low-latency autonomous nano-drones as well. △ Less

Submitted 27 May, 2023; originally announced May 2023.