-
Bridging Simulation and Measurements through Ray-Launching Analysis: A Study in a Complex Urban Scenario Environment
Authors:
Xueyun Long,
Amina Fellan,
Mario Pauli,
Hans D. Schotten,
Thomas Zwick
Abstract:
With the rapid increase in mobile subscribers, there is a drive towards achieving higher data rates, prompting the use of higher frequencies in future wireless communication technologies. Wave propagation channel modeling for these frequencies must be considered in conjunction with measurement results. This paper presents a ray-launching (RL)-based simulation in a complex urban scenario characteri…
▽ More
With the rapid increase in mobile subscribers, there is a drive towards achieving higher data rates, prompting the use of higher frequencies in future wireless communication technologies. Wave propagation channel modeling for these frequencies must be considered in conjunction with measurement results. This paper presents a ray-launching (RL)-based simulation in a complex urban scenario characterized by an undulating terrain with a high density of trees. The simulation results tend to closely match the reported measurements when more details are considered. This underscores the benefits of using the RL method, which provides detailed space-time and angle-delay results.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Cost-Effectiveness Analysis and Design of Cost-Efficient Cell-Free Massive MIMO Systems
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Cell-free massive multi-input multi-output (MIMO) has recently attracted much attention, attributed to its potential to deliver uniform service quality. However, the adoption of a cell-free architecture raises concerns about the high implementation costs associated with deploying numerous distributed access points (APs) and the need for fronthaul network installation. To ensure the sustainability…
▽ More
Cell-free massive multi-input multi-output (MIMO) has recently attracted much attention, attributed to its potential to deliver uniform service quality. However, the adoption of a cell-free architecture raises concerns about the high implementation costs associated with deploying numerous distributed access points (APs) and the need for fronthaul network installation. To ensure the sustainability of next-generation wireless networks, it is crucial to improve cost-effectiveness, alongside achieving high performance. To address this, we conduct a cost analysis of cell-free massive MIMO and build a unified model with varying numbers of antennas per AP. Our objective is to explore whether employing multi-antenna APs could reduce system costs while maintaining performance. The analysis and evaluation result in the identification of a cost-effective design for cell-free massive MIMO, providing valuable insights for practical implementation.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Unified Modeling and Performance Comparison for Cellular and Cell-Free Massive MIMO
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Cell-free massive multi-input multi-output (MIMO) has recently gained a lot of attention due to its high potential in sixth-generation (6G) wireless systems. The goal of this paper is to first present a unified modeling for massive MIMO, encompassing both cellular and cell-free architectures with a variable number of antennas per access point. We derive signal transmission models and achievable sp…
▽ More
Cell-free massive multi-input multi-output (MIMO) has recently gained a lot of attention due to its high potential in sixth-generation (6G) wireless systems. The goal of this paper is to first present a unified modeling for massive MIMO, encompassing both cellular and cell-free architectures with a variable number of antennas per access point. We derive signal transmission models and achievable spectral efficiency in both the downlink and uplink using zero-forcing and maximal-ratio schemes. We also provide performance comparisons in terms of per-user and sum spectral efficiency.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Cell-Free Terahertz Massive MIMO: A Novel Paradigm Beyond Ultra-Massive MIMO
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Terahertz (THz) frequencies have recently garnered considerable attention due to their potential to offer abundant spectral resources for communication, as well as distinct advantages in sensing, positioning, and imaging. Nevertheless, practical implementation encounters challenges stemming from the limited distances of signal transmission, primarily due to notable propagation, absorption, and blo…
▽ More
Terahertz (THz) frequencies have recently garnered considerable attention due to their potential to offer abundant spectral resources for communication, as well as distinct advantages in sensing, positioning, and imaging. Nevertheless, practical implementation encounters challenges stemming from the limited distances of signal transmission, primarily due to notable propagation, absorption, and blockage losses. To address this issue, the current strategy involves employing ultra-massive multi-input multi-output (UMMIMO) to generate high beamforming gains, thereby extending the transmission range. This paper introduces an alternative solution through the utilization of cell-free massive MIMO (CFmMIMO) architecture, wherein the closest access point is actively chosen to reduce the distance, rather than relying solely on a substantial number of antennas. We compare these two techniques through simulations and the numerical results justify that CFmMIMO is superior to UMMIMO in both spectral and energy efficiency at THz frequencies.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
A Robust UAV-Based Approach for Power-Modulated Jammer Localization Using DoA
Authors:
Zexin Fang,
Bin Han,
Hans D. Schotten
Abstract:
Unmanned aerial vehicles (UAVs) are well-suited to localize jammers, particularly when jammers are at non-terrestrial locations, where conventional detection methods face challenges. In this work we propose a novel localization method, sample pruning gradient descend (SPGD), which offers robust performance against multiple power-modulated jammers with low computational complexity.
Unmanned aerial vehicles (UAVs) are well-suited to localize jammers, particularly when jammers are at non-terrestrial locations, where conventional detection methods face challenges. In this work we propose a novel localization method, sample pruning gradient descend (SPGD), which offers robust performance against multiple power-modulated jammers with low computational complexity.
△ Less
Submitted 21 May, 2024; v1 submitted 15 May, 2024;
originally announced May 2024.
-
Robust Federated Learning for Wireless Networks: A Demonstration with Channel Estimation
Authors:
Zexin Fang,
Bin Han,
Hans D. Schotten
Abstract:
Federated learning (FL) offers a privacy-preserving collaborative approach for training models in wireless networks, with channel estimation emerging as a promising application. Despite extensive studies on FL-empowered channel estimation, the security concerns associated with FL require meticulous attention. In a scenario where small base stations (SBSs) serve as local models trained on cached da…
▽ More
Federated learning (FL) offers a privacy-preserving collaborative approach for training models in wireless networks, with channel estimation emerging as a promising application. Despite extensive studies on FL-empowered channel estimation, the security concerns associated with FL require meticulous attention. In a scenario where small base stations (SBSs) serve as local models trained on cached data, and a macro base station (MBS) functions as the global model setting, an attacker can exploit the vulnerability of FL, launching attacks with various adversarial attacks or deployment tactics. In this paper, we analyze such vulnerabilities, corresponding solutions were brought forth, and validated through simulation.
△ Less
Submitted 3 April, 2024;
originally announced April 2024.
-
3D Cooperative Localization in UAV Systems: CRLB Analysis and Security Solutions
Authors:
Zexin Fang,
Bin Han,
Hans D. Schotten
Abstract:
This paper presents a robust and secure framework for achieving accurate and reliable cooperative localization in multiple unmanned aerial vehicle (UAV) systems. The Cramer-Rao low bound (CRLB) for the three-dimensional (3D) cooperative localization network is derived, with particular attention given to the non-uniform spatial distribution of anchor nodes. Challenges of mobility and security threa…
▽ More
This paper presents a robust and secure framework for achieving accurate and reliable cooperative localization in multiple unmanned aerial vehicle (UAV) systems. The Cramer-Rao low bound (CRLB) for the three-dimensional (3D) cooperative localization network is derived, with particular attention given to the non-uniform spatial distribution of anchor nodes. Challenges of mobility and security threats are addressed, corresponding solutions are brought forth and numerically assessed . The proposed solution incorporates two key components: the Mobility Adaptive Gradient Descent (MAGD) and Time-evolving Anomaly Detection (TAD). The MAGD adapts the gradient descent algorithm to handle the configuration changes in cooperative localization systems, ensuring accurate localization in dynamic scenarios. The TAD cooperates with reputation propagation (RP) scheme to detect and mitigate potential attacks by identifying malicious data, enhancing the security and resilience of the cooperative localization.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Hierarchical Cell-Free Massive MIMO for High Capacity with Simple Implementation
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Cell-free massive multi-input multi-output (MIMO) has recently gained much attention for its potential in sha** the landscape of sixth-generation (6G) wireless systems. This paper proposes a hierarchical network architecture tailored for cell-free massive MIMO, seamlessly integrating co-located and distributed antennas. A central base station (CBS), equipped with an antenna array, positions itse…
▽ More
Cell-free massive multi-input multi-output (MIMO) has recently gained much attention for its potential in sha** the landscape of sixth-generation (6G) wireless systems. This paper proposes a hierarchical network architecture tailored for cell-free massive MIMO, seamlessly integrating co-located and distributed antennas. A central base station (CBS), equipped with an antenna array, positions itself near the center of the coverage area, complemented by distributed access points spanning the periphery. The proposed architecture remarkably outperforms conventional cell-free networks, demonstrating superior sum throughput while maintaining a comparable worst-case per-user spectral efficiency. Meanwhile, the implementation cost associated with the fronthaul network is substantially diminished.
△ Less
Submitted 20 January, 2024;
originally announced January 2024.
-
Beam-Based Multiple Access for IRS-Aided Millimeter-Wave and Terahertz Communications
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
Recently, intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) and terahertz (THz) communications are considered in the wireless community. This paper aims to design a beam-based multiple-access strategy for this new paradigm. Its key idea is to make use of multiple sub-arrays over a hybrid digital-analog array to form independent beams, each of which is steered towards the desired…
▽ More
Recently, intelligent reflecting surface (IRS)-aided millimeter-wave (mmWave) and terahertz (THz) communications are considered in the wireless community. This paper aims to design a beam-based multiple-access strategy for this new paradigm. Its key idea is to make use of multiple sub-arrays over a hybrid digital-analog array to form independent beams, each of which is steered towards the desired direction to mitigate inter-user interference and suppress unwanted signal reflection. The proposed scheme combines the advantages of both orthogonal multiple access (i.e., no inter-user interference) and non-orthogonal multiple access (i.e., full time-frequency resource use). Consequently, it can substantially boost the system capacity, as verified by Monte-Carlo simulations.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
A Short Overview of 6G V2X Communication Standards
Authors:
Donglin Wang,
Yann Nana Nganso,
Hans D. Schotten
Abstract:
We are on the verge of a new age of linked autonomous cars with unheard-of user experiences, dramatically improved air quality and road safety, extremely varied transportation settings, and a plethora of cutting-edge apps. A substantially improved Vehicle-to-Everything (V2X) communication network that can simultaneously support massive hyper-fast, ultra-reliable, and low-latency information exchan…
▽ More
We are on the verge of a new age of linked autonomous cars with unheard-of user experiences, dramatically improved air quality and road safety, extremely varied transportation settings, and a plethora of cutting-edge apps. A substantially improved Vehicle-to-Everything (V2X) communication network that can simultaneously support massive hyper-fast, ultra-reliable, and low-latency information exchange is necessary to achieve this ambitious goal. These needs of the upcoming V2X are expected to be satisfied by the Sixth Generation (6G) communication system. In this article, we start by introducing the history of V2X communications by giving details on the current, develo**, and future developments. We compare the applications of communication technologies such as Wi-Fi, LTE, 5G, and 6G. we focus on the new technologies for 6G V2X which are brain-vehicle interface, blocked-based V2X, and Machine Learning (ML). To achieve this, we provide a summary of the most recent ML developments in 6G vehicle networks. we discuss the security challenges of 6G V2X. We address the strengths, open challenges, development, and improving areas of further study in this field.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
Coverage Hole Elimination System in Industrial Environment
Authors:
Mervat Zarour,
Shreya Tayade,
Sergiy Melnyk,
Hans D. Schotten
Abstract:
The paper proposes a framework to identify and avoid the coverage hole in an indoor industry environment. We assume an edge cloud co-located controller that followers the Automated Guided Vehicle (AGV) movement on a factory floor over a wireless channel. The coverage holes are caused due to blockage, path-loss, and fading effects. An AGV in the coverage hole may lose connectivity to the edge-cloud…
▽ More
The paper proposes a framework to identify and avoid the coverage hole in an indoor industry environment. We assume an edge cloud co-located controller that followers the Automated Guided Vehicle (AGV) movement on a factory floor over a wireless channel. The coverage holes are caused due to blockage, path-loss, and fading effects. An AGV in the coverage hole may lose connectivity to the edge-cloud and become unstable. To avoid connectivity loss, we proposed a framework that identifies the position of coverage hole using a Support- Vector Machine (SVM) classifier model and constructs a binary coverage hole map incorporating the AGV trajectory re-planning to avoid the identified coverage hole. The AGV's re-planned trajectory is optimized and selected to avoid coverage hole the shortest coverage-hole-free trajectory. We further investigated the look-ahead time's impact on the AGV's re-planned trajectory performance. The results reveal that an AGV's re-planned trajectory can be shorter and further optimized if the coverage hole position is known ahead of time
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Terahertz-Enpowered Communications and Sensing in 6G Systems: Opportunities and Challenges
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
The current focus of academia and the telecommunications industry has been shifted to the development of the six-generation (6G) cellular technology, also formally referred to as IMT-2030. Unprecedented applications that 6G aims to accommodate demand extreme communications performance and, in addition, disruptive capabilities such as network sensing. Recently, there has been a surge of interest in…
▽ More
The current focus of academia and the telecommunications industry has been shifted to the development of the six-generation (6G) cellular technology, also formally referred to as IMT-2030. Unprecedented applications that 6G aims to accommodate demand extreme communications performance and, in addition, disruptive capabilities such as network sensing. Recently, there has been a surge of interest in terahertz (THz) frequencies as it offers not only massive spectral resources for communication but also distinct advantages in sensing, positioning, and imaging. The aim of this paper is to provide a brief outlook on opportunities opened by this under-exploited band and challenges that must be addressed to materialize the potential of THz-based communications and sensing in 6G systems.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Opportunistic Reflection in Reconfigurable Intelligent Surface-Assisted Wireless Networks
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
This paper focuses on multiple-access protocol design in a wireless network assisted by multiple reconfigurable intelligent surfaces (RISs). By extending the existing approaches in single-user or single-RIS cases, we present two benchmark schemes for this multi-user multi-RIS scenario. Inspecting their shortcomings, a simple but efficient method coined opportunistic multi-user reflection (OMUR) is…
▽ More
This paper focuses on multiple-access protocol design in a wireless network assisted by multiple reconfigurable intelligent surfaces (RISs). By extending the existing approaches in single-user or single-RIS cases, we present two benchmark schemes for this multi-user multi-RIS scenario. Inspecting their shortcomings, a simple but efficient method coined opportunistic multi-user reflection (OMUR) is proposed. The key idea is to opportunistically select the best user as the anchor for optimizing the RISs, and non-orthogonally transmitting all users' signals simultaneously. A simplified version of OMUR exploiting random phase shifts is also proposed to avoid the complexity of RIS channel estimation.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
A Simple Multiple-Access Design for Reconfigurable Intelligent Surface-Aided Systems
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
This paper focuses on the design of transmission methods and reflection optimization for a wireless system assisted by a single or multiple reconfigurable intelligent surfaces (RISs). The existing techniques are either too complex to implement in practical systems or too inefficient to achieve high performance. To overcome the shortcomings of the existing schemes, we propose a simple but efficient…
▽ More
This paper focuses on the design of transmission methods and reflection optimization for a wireless system assisted by a single or multiple reconfigurable intelligent surfaces (RISs). The existing techniques are either too complex to implement in practical systems or too inefficient to achieve high performance. To overcome the shortcomings of the existing schemes, we propose a simple but efficient approach based on \textit{opportunistic reflection} and \textit{non-orthogonal transmission}. The key idea is opportunistically selecting the best user that can reap the maximal gain from the optimally reflected signals via RIS. That is to say, only the channel state information of the best user is used for RIS reflection optimization, which can in turn lower complexity substantially. In addition, the second user is selected to superpose its signal on that of the primary user, where the benefits of non-orthogonal transmission, i.e., high system capacity and improved user fairness, are obtained. Additionally, a simplified variant exploiting random phase shifts is proposed to avoid the high overhead of RIS channel estimation.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
A Reliable and Resilient Framework for Multi-UAV Mutual Localization
Authors:
Zexin Fang,
Bin Han,
Hans D. Schotten
Abstract:
This paper presents a robust and secure framework for achieving accurate and reliable mutual localization in multiple unmanned aerial vehicle (UAV) systems. Challenges of accurate localization and security threats are addressed and corresponding solutions are brought forth and accessed in our paper with numerical simulations. The proposed solution incorporates two key components: the Mobility Adap…
▽ More
This paper presents a robust and secure framework for achieving accurate and reliable mutual localization in multiple unmanned aerial vehicle (UAV) systems. Challenges of accurate localization and security threats are addressed and corresponding solutions are brought forth and accessed in our paper with numerical simulations. The proposed solution incorporates two key components: the Mobility Adaptive Gradient Descent (MAGD) and Time-evolving Anomaly Detectio (TAD). The MAGD adapts the gradient descent algorithm to handle the configuration changes in the mutual localization system, ensuring accurate localization in dynamic scenarios. The TAD cooperates with reputation propagation (RP) scheme to detect and mitigate potential attacks by identifying UAVs with malicious data, enhancing the security and resilience of the mutual localization
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Considerations on the EMF Exposure Relating to the Next Generation Non-Terrestrial Networks
Authors:
Amina Fellan,
Ainur Daurembekova,
Hans D. Schotten
Abstract:
The emerging fifth generation (5G) and the upcoming sixth generation (6G) communication technologies introduce the use of space- and airborne networks in their architectures under the scope of non-terrestrial networks (NTNs). With this integration of satellite and aerial platform networks, better coverage, network flexibility and easier deployment can be achieved. Correspondingly, satellite broadb…
▽ More
The emerging fifth generation (5G) and the upcoming sixth generation (6G) communication technologies introduce the use of space- and airborne networks in their architectures under the scope of non-terrestrial networks (NTNs). With this integration of satellite and aerial platform networks, better coverage, network flexibility and easier deployment can be achieved. Correspondingly, satellite broadband internet providers have launched an increasing number of small satellites operating in low earth orbit (LEO). These recent developments imply an increased electromagnetic field (EMF) exposure to humans and the environment. In this work, we provide a short overview of the state of consumer-grade satellite networks including broadband satellites and future NTN services. We also consider the regulatory state governing their operation within the context of EMF exposure. Finally, we highlight the aspects that are relevant to the assessment of EMF exposure in relation to NTNs.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Evaluating the Impact of Numerology and Retransmission on 5G NR V2X Communication at A System-Level Simulation
Authors:
Donglin Wang,
Pranav Balasaheb Mohite,
Qiuheng Zhou,
Anjie Qiu,
Hans D. Schotten
Abstract:
In recent years, Vehicle-to-Everything (V2X) communication opens an ample amount of opportunities to increase the safety of drivers and passengers and improve traffic efficiency which enables direct communication between vehicles. The Third Generation Partnership Project (3GPP) has specified a 5G New Radio (NR) Sidelink (SL) PC5 interface for supporting Cellular V2X (C-V2X) communication in Releas…
▽ More
In recent years, Vehicle-to-Everything (V2X) communication opens an ample amount of opportunities to increase the safety of drivers and passengers and improve traffic efficiency which enables direct communication between vehicles. The Third Generation Partnership Project (3GPP) has specified a 5G New Radio (NR) Sidelink (SL) PC5 interface for supporting Cellular V2X (C-V2X) communication in Release 16 in 2017. 5G NR V2X communication is expected to provide high reliability, extra-low latency, and a high data rate for vehicular networks. In this paper, the newly introduced features of 5G NR standards like flexible numerology, variable Subcarrier Spacing (SCS), and allocated Physical Resource Blocks (PRBs) have been inspected in 5G NR V2X communications. Moreover, the 5G NR V2X data packet will be distributed to all nearby User Equipment (UE) by the Transmitter (Tx). However, there may be instances where certain UEs fail to receive the data packets in a single transmission. Unfortunately, the SL Tx lacks a feedback channel to verify if the Receivers (Rxs) have received the information. To meet the stringent reliability and latency requirements of C-V2X communication, we suggest and assess a retransmission scheme along with a scheme that incorporates varying resource allocations for retransmission in NR V2X communication. The effect of retransmission schemes on NR V2X communication systems has been detected.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Investigating the Impact of Variables on Handover Performance in 5G Ultra-Dense Networks
Authors:
Donglin Wang,
Anjie Qiu,
Qiuheng Zhou,
Sanket Partani,
Hans D. Schotten
Abstract:
The advent of 5G New Radio (NR) technology has revolutionized the landscape of wireless communication, offering various enhancements such as elevated system capacity, improved spectrum efficiency, and higher data transmission rates. To achieve these benefits, 5G has implemented the Ultra-Dense Network (UDN) architecture, characterized by the deployment of numerous small general Node B (gNB) units.…
▽ More
The advent of 5G New Radio (NR) technology has revolutionized the landscape of wireless communication, offering various enhancements such as elevated system capacity, improved spectrum efficiency, and higher data transmission rates. To achieve these benefits, 5G has implemented the Ultra-Dense Network (UDN) architecture, characterized by the deployment of numerous small general Node B (gNB) units. While this approach boosts system capacity and frequency reuse, it also raises concerns such as increased signal interference, longer handover times, and higher handover failure rates. To address these challenges, the critical factor of Time to Trigger (TTT) in handover management must be accurately determined. Furthermore, the density of gNBs has a significant impact on handover performance. This study provides a comprehensive analysis of 5G handover management. Through the development and utilization of a downlink system-level simulator, the effects of various TTT values and gNB densities on 5G handover were evaluated, taking into consideration the movement of Traffic Users (TUs) with varying velocities. Simulation results showed that the handover performance can be optimized by adjusting the TTT under different gNB densities, providing valuable insights into the proper selection of TTT, UDN, and TU velocity to enhance 5G handover performance.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Terahertz Communications and Sensing for 6G and Beyond: A Comprehensive Review
Authors:
Wei Jiang,
Qiuheng Zhou,
Jiguang He,
Mohammad Asif Habibi,
Sergiy Melnyk,
Mohammed El Absi,
Bin Han,
Marco Di Renzo,
Hans Dieter Schotten,
Fa-Long Luo,
Tarek S. El-Bawab,
Markku Juntti,
Merouane Debbah,
Victor C. M. Leung
Abstract:
Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this pape…
▽ More
Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this paper presents a comprehensive treatment and technology survey on THz communications and sensing in terms of advantages, applications, propagation characterization, channel modeling, measurement campaigns, antennas, transceiver devices, beamforming, networking, the integration of communications and sensing, and experimental testbeds. Starting from the motivation and use cases, we survey the development and historical perspective of THz communications and sensing with the anticipated 6G requirements. We explore the radio propagation, channel modeling, and measurement for the THz band. The transceiver requirements, architectures, technological challenges, and state-of-the-art approaches to compensate for the high propagation losses, including appropriate antenna design and beamforming solutions. We overview several related technologies that either are required by or are beneficial for THz systems and networks. The synergistic design of sensing and communications is explored in depth. Practical trials, demonstrations, and experiments are also summarized. The paper gives a holistic view of the current state of the art and highlights the open research challenges towards 6G and beyond.
△ Less
Submitted 6 May, 2024; v1 submitted 19 July, 2023;
originally announced July 2023.
-
A Secure and Robust Approach for Distance-Based Mutual Positioning of Unmanned Aerial Vehicles
Authors:
Bin Han,
Hans D. Schotten
Abstract:
Unmanned aerial vehicle (UAV) is becoming increasingly important in modern civilian and military applications. However, its novel use cases is bottlenecked by conventional satellite and terrestrial localization technologies, and calling for complementary solutions. Multi-UAV mutual positioning can be a potential answer, but its accuracy and security are challenged by inaccurate and/or malicious me…
▽ More
Unmanned aerial vehicle (UAV) is becoming increasingly important in modern civilian and military applications. However, its novel use cases is bottlenecked by conventional satellite and terrestrial localization technologies, and calling for complementary solutions. Multi-UAV mutual positioning can be a potential answer, but its accuracy and security are challenged by inaccurate and/or malicious measurements. This paper proposes a novel, robust, and secure approach to address these issues.
△ Less
Submitted 9 January, 2024; v1 submitted 19 May, 2023;
originally announced May 2023.
-
Full-Spectrum Wireless Communications for 6G and Beyond: From Microwave, Millimeter-Wave, Terahertz to Lightwave
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
As of today, 5G is rolling out across the world, but academia and industry have shifted their attention to the sixth generation (6G) cellular technology for a full-digitalized, intelligent society in 2030 and beyond. 6G demands far more bandwidth to support extreme performance, exacerbating the problem of spectrum shortage in mobile communications. In this context, this paper proposes a novel conc…
▽ More
As of today, 5G is rolling out across the world, but academia and industry have shifted their attention to the sixth generation (6G) cellular technology for a full-digitalized, intelligent society in 2030 and beyond. 6G demands far more bandwidth to support extreme performance, exacerbating the problem of spectrum shortage in mobile communications. In this context, this paper proposes a novel concept coined Full-Spectrum Wireless Communications (FSWC). It makes use of all communication-feasible spectral resources over the whole electromagnetic (EW) spectrum, from microwave, millimeter wave, terahertz (THz), infrared light, visible light, to ultraviolet light. FSWC not only provides sufficient bandwidth but also enables new paradigms taking advantage of peculiarities on different EW bands. This paper will define FSWC, justify its necessity for 6G, and then discuss the opportunities and challenges of exploiting THz and optical bands.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Leveraging 5G private networks, UAVs and robots to detect and combat broad-leaved dock (Rumex obtusifolius) in feed production
Authors:
Christian Schellenberger,
Christopher Hobelsberger,
Bastian Kolb-Grunder,
Florian Herrmann,
Hans D. Schotten
Abstract:
In this paper an autonomous system to detect and combat Rumex obtusifolius leveraging autonomous unmanned aerial vehicles (UAV), small autonomous sprayer robots and 5G SA connectivity is presented. Rumex obtusifolius is a plant found on grassland that drains nutrients from surrounding plants and has lower nutritive value than the surrounding grass. High concentrations of it have to be combated in…
▽ More
In this paper an autonomous system to detect and combat Rumex obtusifolius leveraging autonomous unmanned aerial vehicles (UAV), small autonomous sprayer robots and 5G SA connectivity is presented. Rumex obtusifolius is a plant found on grassland that drains nutrients from surrounding plants and has lower nutritive value than the surrounding grass. High concentrations of it have to be combated in order to use the grass as feed for livestock. One or more UAV are controlled through 5G to survey the current working area and send back high-definition photos of the ground to an edge cloud server. There an AI algorithm using neural networks detects the Rumex obtusifolius and calculates its position using the UAVs position data. When plants are detected an optimal path is calculated and sent via 5G to the sprayer robot to get to them in minimal time. It will then move to the position of the broad-leafed dock and use an on-board camera and the edge cloud to verify the position of the plant and precisely spray crop protection only where the target plant is. The spraying robot and UAV are already operational, the training of the detection algorithm is still ongoing. The described system is being tested with a fixed private 5G SA network and a nomadic 5G SA network as public cellular networks are not performant enough in regards to low latency and upload bandwidth.
△ Less
Submitted 30 April, 2023;
originally announced May 2023.
-
Cell-Edge Performance Booster in 6G: Cell-Free Massive MIMO vs. Reconfigurable Intelligent Surface
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
User experience in mobile communications is vulnerable to worse quality at the cell edge, which cannot be compensated by enjoying excellent service at the cell center, according to the principle of risk aversion in behavioral economics. Constrained by weak signal strength and substantial inter-cell interference, the cell edge is always a major bottleneck of any mobile network. Due to their possibi…
▽ More
User experience in mobile communications is vulnerable to worse quality at the cell edge, which cannot be compensated by enjoying excellent service at the cell center, according to the principle of risk aversion in behavioral economics. Constrained by weak signal strength and substantial inter-cell interference, the cell edge is always a major bottleneck of any mobile network. Due to their possibility for empowering the next-generation mobile system, reconfigurable intelligent surface (RIS) and cell-free massive MIMO (CFmMIMO) have recently attracted a lot of focus from academia and industry. In addition to a variety of technological advantages, both are highly potential to boost cell-edge performance. To the authors' best knowledge, a performance comparison of RIS and CFmMIMO, especially on the cell edge, is still missing in the literature. To fill this gap, this paper establishes a fair scenario and demonstrates extensive numerical results to clarify their behaviors at the cell edge.
△ Less
Submitted 7 April, 2023;
originally announced April 2023.
-
Effect of Variable Physical Numerologies on Link-Level Performance of 5G NR V2X
Authors:
Donglin Wang,
Oneza Saraci,
Raja R. Sattiraju,
Qiuheng Zhou,
Hans D. Schotten
Abstract:
With technology and societal development, the 5th generation wireless communication (5G) contributes significantly to different societies like industries or academies. Vehicle-to-Everything (V2X) communication technology has been one of the leading services for 5G which has been applied in vehicles. It is used to exchange their status information with other traffic and traffic participants to incr…
▽ More
With technology and societal development, the 5th generation wireless communication (5G) contributes significantly to different societies like industries or academies. Vehicle-to-Everything (V2X) communication technology has been one of the leading services for 5G which has been applied in vehicles. It is used to exchange their status information with other traffic and traffic participants to increase traffic safety and efficiency. Cellular-V2X (C-V2X) is one of the emerging technologies to enable V2X communications. The first Long-Term Evolution (LTE) based C-V2X was released on the 3rd Generation Partnership Project (3GPP) standard. 3GPP is working towards the development of New Radio (NR) systems that it is called 5G NR V2X. One single numerology in LTE cannot satisfy most performance requirements because of the variety of deployment options and scenarios. For this reason, in order to meet the diverse requirements, the 5G NR Physical Layer (PHY) is designed to provide a highly flexible framework. Scalable Orthogonal Frequency-Division Multiplexing (OFDM) numerologies make flexibility possible. The term numerology refers to the PHY waveform parametrization and allows different Subcarrier Spacings (SCSs), symbols, and slot duration. This paper implements the Link-Level (LL) simulations of LTE C-V2X communication and 5G NR V2X communication where simulation results are used to compare similarities and differences between LTE and 5G NR. We detect the effect of variable PHY Numerologies of 5G NR on the LL performance of V2X. The simulation results show that the performance of 5G NR improved by using variable numerologies.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
User Scheduling and Passive Beamforming for FDMA/OFDMA in Intelligent Reflection Surface
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Most prior works on intelligent reflecting surface (IRS) merely consider point-to-point communications, including a single user, for ease of analysis. Nevertheless, a practical wireless system needs to accommodate multiple users simultaneously. Due to the lack of frequency-selective reflection, namely the set of phase shifts cannot be different across frequency subchannels, the integration of IRS…
▽ More
Most prior works on intelligent reflecting surface (IRS) merely consider point-to-point communications, including a single user, for ease of analysis. Nevertheless, a practical wireless system needs to accommodate multiple users simultaneously. Due to the lack of frequency-selective reflection, namely the set of phase shifts cannot be different across frequency subchannels, the integration of IRS imposes a fundamental challenge to frequency-multiplexing approaches such as frequency-division multiple access (FDMA) and the widely adopted technique called orthogonal FDMA (OFDMA). It motivates us to study (O)FDMA-based multi-user IRS communications to clarify which user scheduling and passive beamforming are favorable under this non-frequency-selective reflection environment. Theoretical analysis and numerical evaluation reveal that (O)FDMA does not need user scheduling when there are a few users. If the number of users becomes large, neither user scheduling nor IRS reflection optimization is necessary. These findings help substantially simplify the design of (O)FDMA-based IRS communications.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
User Selection for Simple Passive Beamforming in Multi-RIS-Aided Multi-User Communications
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
This paper focuses on multi-user downlink signal transmission in a wireless system aided by multiple reconfigurable intelligent surfaces (RISs). In such a multi-RIS, multi-user, multi-antenna scenario, determining a set of RIS phase shifts to maximize the sum throughput becomes intractable. Hence, we propose a novel scheme that can substantially simplify the optimization of passive beamforming. By…
▽ More
This paper focuses on multi-user downlink signal transmission in a wireless system aided by multiple reconfigurable intelligent surfaces (RISs). In such a multi-RIS, multi-user, multi-antenna scenario, determining a set of RIS phase shifts to maximize the sum throughput becomes intractable. Hence, we propose a novel scheme that can substantially simplify the optimization of passive beamforming. By opportunistically selecting a user with the best channel condition as the only active transmitter in the system, it degrades to single-user passive beamforming, where two methods, i.e., joint optimization based on the semidefinite relaxation approach and alternating optimization, are applicable. The superiority of the proposed scheme is demonstrated through Monte-Carlo simulations.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Capacity Analysis and Rate Maximization Design in RIS-Aided Uplink Multi-User MIMO
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Reconfigurable intelligent surface (RIS) has recently drawn intensive attention due to its potential of simultaneously realizing high spectral and energy efficiency in a sustainable way. This paper focuses on the design of efficient transmission methods to maximize the uplink sum throughput in a RIS-aided multi-user multi-input multi-output (MU-MIMO) system. To provide an insightful basis, the cha…
▽ More
Reconfigurable intelligent surface (RIS) has recently drawn intensive attention due to its potential of simultaneously realizing high spectral and energy efficiency in a sustainable way. This paper focuses on the design of efficient transmission methods to maximize the uplink sum throughput in a RIS-aided multi-user multi-input multi-output (MU-MIMO) system. To provide an insightful basis, the channel capacity of RIS-aided MU-MIMO is theoretically analyzed. Then, the conventional transmission schemes based on orthogonal multiple access are presented as the baseline. From the information-theoretic perspective, we propose two novel schemes, i.e., \textit{joint transmission} based on the semidefinite relaxation of quadratic optimization problems and \textit{opportunistic transmission} relying on the best user selection. The superiority of the proposed schemes over the conventional ones in terms of achievable rates is justified through simulation results.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Intelligent Reflecting Vehicle Surface: A Novel IRS Paradigm for Moving Vehicular Networks
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Intelligent reflecting surface (IRS) has recently received much attention from the research community due to its potential to achieve high spectral and power efficiency cost-effectively. In addition to traditional cellular networks, the use of IRS in vehicular networks is also considered. Prior works on IRS-aided vehicle-to-everything communications focus on deploying reflection surfaces on the fa…
▽ More
Intelligent reflecting surface (IRS) has recently received much attention from the research community due to its potential to achieve high spectral and power efficiency cost-effectively. In addition to traditional cellular networks, the use of IRS in vehicular networks is also considered. Prior works on IRS-aided vehicle-to-everything communications focus on deploying reflection surfaces on the facades of buildings along the road for sidelink performance enhancement. This paper goes beyond the state of the art by presenting a novel paradigm coined Intelligent Reflecting Vehicle Surface (IRVS). It embeds a massive number of reflection elements on vehicles' surfaces to aid moving vehicular networks in military and emergency communications. We propose an alternative optimization method to optimize jointly active beamforming at the base station and passive reflection across multiple randomly-distributed vehicle surfaces. Performance evaluation in terms of sum spectral efficiency under continuous, discrete, and random phase shifts is conducted. Numerical results reveal that IRVS can substantially improve the capacity of a moving vehicular network.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Multi-User Reconfigurable Intelligent Surface-Aided Communications Under Discrete Phase Shifts
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
This paper focuses on studying orthogonal and non-orthogonal multiple access in intelligent reflecting surface (IRS)-aided systems. Unlike most prior works assuming continuous phase shifts, we employ the practical setup where only a finite number of discrete phase shifts are available. To maximize the sum rate, active beamforming and discrete reflection need to be jointly optimized. We therefore p…
▽ More
This paper focuses on studying orthogonal and non-orthogonal multiple access in intelligent reflecting surface (IRS)-aided systems. Unlike most prior works assuming continuous phase shifts, we employ the practical setup where only a finite number of discrete phase shifts are available. To maximize the sum rate, active beamforming and discrete reflection need to be jointly optimized. We therefore propose an alternative optimization method to get the optimal continuous phase shifts iteratively, and then quantize each phase shift to its nearest discrete value. The sum-rate maximization of different schemes is theoretically analyzed and numerically evaluated with different numbers of phase-control bits.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Mitigating Unnecessary Handovers in Ultra-Dense Networks through Machine Learning-based Mobility Prediction
Authors:
Donglin Wang,
Anjie Qiu,
Sanket Partani,
Qiuheng Zhou,
Hans D. Schotten
Abstract:
In 5G wireless communication, Intelligent Transportation Systems (ITS) and automobile applications, such as autonomous driving, are widely examined. These applications have strict requirements and often require high Quality of Service (QoS). In an urban setting, Ultra-Dense Networks (UDNs) have the potential to not only provide optimal QoS but also increase system capacity and frequency reuse. How…
▽ More
In 5G wireless communication, Intelligent Transportation Systems (ITS) and automobile applications, such as autonomous driving, are widely examined. These applications have strict requirements and often require high Quality of Service (QoS). In an urban setting, Ultra-Dense Networks (UDNs) have the potential to not only provide optimal QoS but also increase system capacity and frequency reuse. However, the current architecture of 5G UDN of dense Small Cell Nodes (SCNs) deployment prompts increased delay, handover times, and handover failures. In this paper, we propose a Machine Learning (ML) supported Mobility Prediction (MP) strategy to predict future Vehicle User Equipment (VUE) mobility and handover locations. The primary aim of the proposed methodology is to minimize Unnecessary Handover (UHO) while ensuring VUEs take full advantage of the deployed UDN. We evaluate and validate our approach on a downlink system-level simulator. We predict mobility using Support Vector Machine (SVM), Decision Tree Classifier (DTC), and Random Forest Classifier (RFC). The simulation results show an average reduction of 30% in handover times by utilizing ML-based MP, with RFC showing the most reduction up to 70% in some cases.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Artificial ASMR: A Cyber-Psychological Approach
Authors:
Zexin Fang,
Bin Han,
C. Clark Cao,
Hans. D. Schotten
Abstract:
The popularity of Autonomous Sensory Meridian Response (ASMR) has skyrockted over the past decade, but scientific studies on what exactly triggered ASMR effect remain few and immature, one most commonly acknowledged trigger is that ASMR clips typically provide rich semantic information. With our attention caught by the common acoustic patterns in ASMR audios, we investigate the correlation between…
▽ More
The popularity of Autonomous Sensory Meridian Response (ASMR) has skyrockted over the past decade, but scientific studies on what exactly triggered ASMR effect remain few and immature, one most commonly acknowledged trigger is that ASMR clips typically provide rich semantic information. With our attention caught by the common acoustic patterns in ASMR audios, we investigate the correlation between the cyclic features of audio signals and their effectiveness in triggering ASMR effects. A cyber-psychological approach that combines signal processing, artificial intelligence, and experimental psychology is taken, with which we are able to quantize ASMR-related acoustic features, and therewith synthesize ASMR clips with random cyclic patterns but not delivering identifiably scenarios to the audience, which were proven to be effective in triggering ASMR effects.
△ Less
Submitted 5 July, 2023; v1 submitted 25 October, 2022;
originally announced October 2022.
-
Deep Learning-Aided Delay-Tolerant Zero-Forcing Precoding in Cell-Free Massive MIMO
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
In the context of cell-free massive multi-input multi-output (CFmMIMO), zero-forcing precoding (ZFP) is superior in terms of spectral efficiency. However, it suffers from channel aging owing to fronthaul and processing delays. In this paper, we propose a robust scheme coined delay-tolerant zero-forcing precoding (DT-ZFP), which exploits deep learning-aided channel prediction to alleviate the effec…
▽ More
In the context of cell-free massive multi-input multi-output (CFmMIMO), zero-forcing precoding (ZFP) is superior in terms of spectral efficiency. However, it suffers from channel aging owing to fronthaul and processing delays. In this paper, we propose a robust scheme coined delay-tolerant zero-forcing precoding (DT-ZFP), which exploits deep learning-aided channel prediction to alleviate the effect of outdated channel state information (CSI). A predictor consisting of a bank of user-specific predictive modules is specifically designed for such a multi-user scenario. Leveraging the degree of freedom brought by the prediction horizon, the delivery of CSI and precoded data through a fronthaul network and the transmission of user data and pilots over an air interface can be parallelized. Therefore, DT-ZFP not only effectively combats channel aging but also avoids the inefficient Stop-and-Wait mechanism of the canonical ZFP in CFmMIMO.
△ Less
Submitted 11 October, 2022;
originally announced October 2022.
-
Performance Impact of Channel Aging and Phase Noise on Intelligent Reflecting Surface
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
This letter aims to clarify the impact of channel aging and phase noise on the performance of intelligent reflecting surface-aided wireless systems. We first model mathematically the outdated channel state information (CSI) due to Doppler shifts and phase noise stemming from hardware impairment. Then, a closed-form expression of achievable spectral efficiency under noisy and aged CSI is theoretica…
▽ More
This letter aims to clarify the impact of channel aging and phase noise on the performance of intelligent reflecting surface-aided wireless systems. We first model mathematically the outdated channel state information (CSI) due to Doppler shifts and phase noise stemming from hardware impairment. Then, a closed-form expression of achievable spectral efficiency under noisy and aged CSI is theoretically derived. Some typical simulation results to numerically demonstrate the performance impact are illustrated.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Modeling the System-Level Reliability towards a Convergence of Communication, Computing and Control
Authors:
Bin Han,
Hans D. Schotten
Abstract:
Enabled and driven by modern advances in wireless telecommunication and artificial intelligence, the convergence of communication, computing, and control is becoming inevitable in future industrial applications. Analytical and optimizing frameworks, however, are not yet readily developed for this new technical trend. In this work we discuss the necessity and typical scenarios of this convergence,…
▽ More
Enabled and driven by modern advances in wireless telecommunication and artificial intelligence, the convergence of communication, computing, and control is becoming inevitable in future industrial applications. Analytical and optimizing frameworks, however, are not yet readily developed for this new technical trend. In this work we discuss the necessity and typical scenarios of this convergence, and propose a new approach to model the system-level reliability across all involved domainss
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Signal Restoration and Channel Estimation for Channel Sounding with SDRs
Authors:
Julian Ahrens,
Lia Ahrens,
Michael Zentarra,
Hans D. Schotten
Abstract:
In this paper, the task of channel sounding using software defined radios (SDRs) is considered. In contrast to classical channel sounding equipment, SDRs are general purpose devices and require additional steps to be implemented when employed for this task. On top of this, SDRs may exhibit quirks causing signal artefacts that obstruct the effective collection of channel estimation data. Based on t…
▽ More
In this paper, the task of channel sounding using software defined radios (SDRs) is considered. In contrast to classical channel sounding equipment, SDRs are general purpose devices and require additional steps to be implemented when employed for this task. On top of this, SDRs may exhibit quirks causing signal artefacts that obstruct the effective collection of channel estimation data. Based on these considerations, in this work, a practical algorithm is devised to compensate for the drawbacks of using SDRs for channel sounding encountered in a concrete setup. The proposed approach utilises concepts from time series and Fourier analysis and comprises a signal restoration routine for mitigating artefacts within the recorded signals and an encompassing channel sounding process. The efficacy of the algorithm is evaluated on real measurements generated within the given setup. The empirical results show that the proposed method is able to counteract the shortcomings of the equipment and deliver reasonable channel estimates.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Initial Access for Millimeter-Wave and Terahertz Communications with Hybrid Beamforming
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
In order to achieve terabits-per-second (Tbps) data rates in the sixth-generation (6G) mobile system, wireless communications are required to exploit the abundant spectrum in the millimeter-wave (mmWave) and terahertz (THz) bands. However, high-frequency transmission heavily relies on high beamforming gain to compensate for severe propagation loss. A beam-based system faces a barrier in the proces…
▽ More
In order to achieve terabits-per-second (Tbps) data rates in the sixth-generation (6G) mobile system, wireless communications are required to exploit the abundant spectrum in the millimeter-wave (mmWave) and terahertz (THz) bands. However, high-frequency transmission heavily relies on high beamforming gain to compensate for severe propagation loss. A beam-based system faces a barrier in the process of initial access, where a base station must broadcast synchronization signals and system information to all users within its coverage. Hence, this paper proposes a novel omnidirectional broadcasting scheme for mmWave and THz systems with hybrid beamforming. It provides an instantaneously equal gain over all directions by forming complementary beams over sub-arrays. Numerical results verify that it can achieve omnidirectional coverage with a performance that remarkably outperforms the previous scheme.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Initial Beamforming for Millimeter-Wave and Terahertz Communications in 6G Mobile Systems
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
To meet the demand of supreme data rates in terabits-per-second, the next-generation mobile system needs to exploit the abundant spectrum in the millimeter-wave and terahertz bands. However, high-frequency transmission heavily relies on large-scale antenna arrays to reap high beamforming gain, used to compensate for severe propagation loss. It raises a problem of omni-directional beamforming durin…
▽ More
To meet the demand of supreme data rates in terabits-per-second, the next-generation mobile system needs to exploit the abundant spectrum in the millimeter-wave and terahertz bands. However, high-frequency transmission heavily relies on large-scale antenna arrays to reap high beamforming gain, used to compensate for severe propagation loss. It raises a problem of omni-directional beamforming during the phase of initial access, where a base station is required to broadcast synchronization signals and system information to all users within its coverage. This paper proposes a novel initial beamforming scheme, which provides instantaneous gain equally in all directions by forming a pair of complementary beams. Numerical results verify that it can achieve omni-directional coverage with the optimal performance that remarkably outperforms the previous scheme called random beamforming. It is applicable for any form of large-scale arrays, and all three architecture, i.e., digital, analog, and hybrid beamforming.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Opportunistic AP Selection in Cell-Free Massive MIMO-OFDM Systems
Authors:
Wei Jiang,
Hans D. Schotten
Abstract:
Exploiting the degree of freedom in the frequency domain and the near-far effect among different access points (APs), this paper proposes an opportunistic transmission scheme in cell-free massive MIMO-OFDM systems. The key idea is to orthogonally assign subcarriers among different users, so that there is only one user on each subcarrier. Then, a user is only served by its near APs through opportun…
▽ More
Exploiting the degree of freedom in the frequency domain and the near-far effect among different access points (APs), this paper proposes an opportunistic transmission scheme in cell-free massive MIMO-OFDM systems. The key idea is to orthogonally assign subcarriers among different users, so that there is only one user on each subcarrier. Then, a user is only served by its near APs through opportunistic selection, while the far APs are deactivated to avoid wasting power over their channels with severe propagation losses. Moreover, the number of active APs per subcarrier becomes small due to the opportunistic selection, making the use of downlink pilots and coherent detection feasible. As corroborated by numerical results, the proposed scheme can bring a significant performance boost in terms of both power efficiency and spectral efficiency.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Dual-Beam Intelligent Reflecting Surface for Millimeter and THz Communications
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
Intelligent reflecting surface (IRS) is a cost-efficient technique to improve power efficiency and spectral efficiency. However, IRS-aided multi-antenna transmission needs to jointly optimize the passive and active beamforming, imposing a high computational burden and high latency due to its iterative optimization process. Making use of hybrid analog-digital beamforming in high-frequency transmiss…
▽ More
Intelligent reflecting surface (IRS) is a cost-efficient technique to improve power efficiency and spectral efficiency. However, IRS-aided multi-antenna transmission needs to jointly optimize the passive and active beamforming, imposing a high computational burden and high latency due to its iterative optimization process. Making use of hybrid analog-digital beamforming in high-frequency transmission systems, a novel technique, coined dual-beam IRS, is proposed in this paper. The key idea is to form a pair of beams towards the IRS and user, respectively. Then, the optimization of passive and active beamforming can be decoupled, resulting in a simplified system design. Simulation results corroborate that it achieves a good balance between the cell-edge and cell-center performance. Compared with the performance bound, the gap is moderate, but it remarkably outperforms other sub-optimal schemes.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Flexible and dependable manufacturing beyond xURLLC: A novel framework for communication-control co-design
Authors:
Bin Han,
Mu-Xia Sun,
Lai-Kan Muk,
Yan-Fu Li,
Hans D. Schotten
Abstract:
Future Industrial 4.0 applications in the 6G era is calling for high dependability that goes far beyond the current ultra-reliable low latency communication (URLLC), and therewith proposed critical challenges to the communication technology. Instead of struggling against the physical and technical limits towards an extreme URLLC (xURLLC), communication-control co-design (CoCoCo) appears a more pro…
▽ More
Future Industrial 4.0 applications in the 6G era is calling for high dependability that goes far beyond the current ultra-reliable low latency communication (URLLC), and therewith proposed critical challenges to the communication technology. Instead of struggling against the physical and technical limits towards an extreme URLLC (xURLLC), communication-control co-design (CoCoCo) appears a more promising solution. This work proposes a novel framework of CoCoCo, which is not only enhancing the dependability of 6G industrial applications such as remote control, but also exhibiting rich potential in revolutionizing the future industry per openness and flexibility of manufacturing systems.
△ Less
Submitted 5 December, 2022; v1 submitted 18 March, 2022;
originally announced April 2022.
-
Time-Energy-Constrained Closed-Loop FBL Communication for Dependable MEC
Authors:
Bin Han,
Yao Zhu,
Anke Schmeink,
Hans D. Schotten
Abstract:
The deployment of multi-access edge computing (MEC) is paving the way towards pervasive intelligence in future 6G networks. This new paradigm also proposes emerging requirements of dependable communications, which goes beyond the ultra-reliable low latency communication (URLLC), focusing on the performance of a closed loop instead of that of an unidirectional link. This work studies the simple but…
▽ More
The deployment of multi-access edge computing (MEC) is paving the way towards pervasive intelligence in future 6G networks. This new paradigm also proposes emerging requirements of dependable communications, which goes beyond the ultra-reliable low latency communication (URLLC), focusing on the performance of a closed loop instead of that of an unidirectional link. This work studies the simple but efficient one-shot transmission scheme, investigating the closed-loop-reliability-optimal policy of blocklength allocation under stringent time and energy constraints.
△ Less
Submitted 10 December, 2021; v1 submitted 24 November, 2021;
originally announced November 2021.
-
The KICK-OFF of 6G Research Worldwide: An Overview
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
The fifth-generation (5G) mobile system is now being deployed across the world and the scale of 5G subscribers is growing quickly in many countries. The attention of academia and industry is increasingly shifting towards the sixth generation (6G) and many pioneering works are being kicked off, indicating an important milestone in the history of 6G. At this juncture, an overview of the current stat…
▽ More
The fifth-generation (5G) mobile system is now being deployed across the world and the scale of 5G subscribers is growing quickly in many countries. The attention of academia and industry is increasingly shifting towards the sixth generation (6G) and many pioneering works are being kicked off, indicating an important milestone in the history of 6G. At this juncture, an overview of the current state of the art of 6G research and a vision of future communications are of great interest. This paper thus investigates up-to-date 6G research programs, ambitions, and main viewpoints of representative countries, institutions, and companies worldwide. Then, the key technologies are outlined and a vision on ``What 6G may look like?" is provided. This paper aims to serve as an enlightening guideline for interested researchers to quickly get an overview when kicking off their 6G research.
△ Less
Submitted 21 November, 2021;
originally announced November 2021.
-
Impact of Channel Aging on Zero-Forcing Precoding in Cell-Free Massive MIMO Systems
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
In the context of cell-free massive multi-input multi-output (mMIMO), zero-forcing precoding (ZFP) requires the exchange of instantaneous channel state information and precoded data symbols via a fronthaul network. It causes considerable propagation and processing delays, which degrade performance. This letter analyzes the impact of channel aging on the performance of ZFP in cell-free mMIMO. The a…
▽ More
In the context of cell-free massive multi-input multi-output (mMIMO), zero-forcing precoding (ZFP) requires the exchange of instantaneous channel state information and precoded data symbols via a fronthaul network. It causes considerable propagation and processing delays, which degrade performance. This letter analyzes the impact of channel aging on the performance of ZFP in cell-free mMIMO. The aging effects of not only user mobility but also phase noise are considered. Numerical results in terms of per-user spectral efficiency are illustrated.
△ Less
Submitted 3 July, 2021;
originally announced July 2021.
-
Cell-Free Massive MIMO-OFDM Transmission over Frequency-Selective Fading Channels
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
This letter presents and analyzes orthogonal frequency-division multiplexing (OFDM)-based multi-carrier transmission for cell-free massive multi-input multi-output (CFmMIMO) over frequency-selective fading channels. Frequency-domain conjugate beamforming, pilot assignment, and user-specific resource allocation are proposed. CFmMIMO-OFDM is scalable to serve a massive number of users and is flexibl…
▽ More
This letter presents and analyzes orthogonal frequency-division multiplexing (OFDM)-based multi-carrier transmission for cell-free massive multi-input multi-output (CFmMIMO) over frequency-selective fading channels. Frequency-domain conjugate beamforming, pilot assignment, and user-specific resource allocation are proposed. CFmMIMO-OFDM is scalable to serve a massive number of users and is flexible to offer diverse data rates for heterogeneous applications.
△ Less
Submitted 3 July, 2021;
originally announced July 2021.
-
Computation Offloading at Field Level: Motivation and Break-Even Point Calculation
Authors:
Michael Gundall,
Christopher Huber,
Hans D. Schotten
Abstract:
Smart manufacturing has the objective of creating highly flexible and resource optimized industrial plants. Furthermore, the improvement of product quality is another important target. These requirements implicate more complex control algo-rithms. Processing these algorithms may exceed the capabilities of resource constrained devices, such as programmable logic controllers (PLCs). In this case, th…
▽ More
Smart manufacturing has the objective of creating highly flexible and resource optimized industrial plants. Furthermore, the improvement of product quality is another important target. These requirements implicate more complex control algo-rithms. Processing these algorithms may exceed the capabilities of resource constrained devices, such as programmable logic controllers (PLCs). In this case, the necessity for computation offloading is given. Due to the fact that industrial plants are currently designed for a life-cycle-time of more than ten years, in a realistic smart manufacturing scenario, these devices have to be considered. Therefore, we investigate the impact of complex algorithms on conventional PLCs by simulating them with a load generator. In addition, we propose a realistic factory scenario including benchmarks for both wireline and wireless communication systems. Thus, their round-trip time (RTT) is measured with and without additional load on the network. With the help of these investigations, break-even points for the application of computation offloading of two typical PLCs of Siemens S7 series can be calculated.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
A Simple Cooperative Diversity Method Based on Deep-Learning-Aided Relay Selection
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
Opportunistic relay selection (ORS) has been recognized as a simple but efficient method for mobile nodes to achieve cooperative diversity in slow fading channels. However, the wrong selection of the best relay arising from outdated channel state information (CSI) in fast time-varying channels substantially degrades its performance. With the proliferation of high-mobility applications and the adop…
▽ More
Opportunistic relay selection (ORS) has been recognized as a simple but efficient method for mobile nodes to achieve cooperative diversity in slow fading channels. However, the wrong selection of the best relay arising from outdated channel state information (CSI) in fast time-varying channels substantially degrades its performance. With the proliferation of high-mobility applications and the adoption of higher frequency bands in 5G and beyond systems, the problem of outdated CSI will become more serious. Therefore, the design of a novel cooperative method that is applicable to not only slow fading but also fast fading is increasingly of importance. To this end, we develop and analyze a deep-learning-aided cooperative method coined predictive relay selection (PRS) in this article. It can remarkably improve the quality of CSI through fading channel prediction while retaining the simplicity of ORS by selecting a single opportunistic relay so as to avoid the complexity of multi-relay coordination and synchronization. Information-theoretic analysis and numerical results in terms of outage probability and channel capacity reveal that PRS achieves full diversity gain in slow fading wireless environments and substantially outperforms the existing schemes in fast fading channels.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Predictive Relay Selection: A Cooperative Diversity Scheme Using Deep Learning
Authors:
Wei Jiang,
Hans Dieter Schotten
Abstract:
In this paper, we propose a novel cooperative multi-relay transmission scheme for mobile terminals to exploit spatial diversity. By improving the timeliness of measured channel state information (CSI) through deep learning (DL)-based channel prediction, the proposed scheme remarkably lowers the probability of wrong relay selection arising from outdated CSI in fast time-varying channels. It inherit…
▽ More
In this paper, we propose a novel cooperative multi-relay transmission scheme for mobile terminals to exploit spatial diversity. By improving the timeliness of measured channel state information (CSI) through deep learning (DL)-based channel prediction, the proposed scheme remarkably lowers the probability of wrong relay selection arising from outdated CSI in fast time-varying channels. It inherits the simplicity of opportunistic relaying by selecting a single relay, avoiding the complexity of multi-relay coordination and synchronization. Numerical results reveal that it can achieve full diversity gain in slow-fading channels and substantially outperforms the existing schemes in fast-fading wireless environments. Moreover, the computational complexity brought by the DL predictor is negligible compared to off-the-shelf computing hardware.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
The Road Towards 6G: A Comprehensive Survey
Authors:
Wei Jiang,
Bin Han,
Mohammad Asif Habibi,
Hans Dieter Schotten
Abstract:
As of today, the fifth generation (5G) mobile communication system has been rolled out in many countries and the number of 5G subscribers already reaches a very large scale. It is time for academia and industry to shift their attention towards the next generation. At this crossroad, an overview of the current state of the art and a vision of future communications are definitely of interest. This a…
▽ More
As of today, the fifth generation (5G) mobile communication system has been rolled out in many countries and the number of 5G subscribers already reaches a very large scale. It is time for academia and industry to shift their attention towards the next generation. At this crossroad, an overview of the current state of the art and a vision of future communications are definitely of interest. This article thus aims to provide a comprehensive survey to draw a picture of the sixth generation (6G) system in terms of drivers, use cases, usage scenarios, requirements, key performance indicators (KPIs), architecture, and enabling technologies. First, we attempt to answer the question of "Is there any need for 6G?" by shedding light on its key driving factors, in which we predict the explosive growth of mobile traffic until 2030, and envision potential use cases and usage scenarios. Second, the technical requirements of 6G are discussed and compared with those of 5G with respect to a set of KPIs in a quantitative manner. Third, the state-of-the-art 6G research efforts and activities from representative institutions and countries are summarized, and a tentative roadmap of definition, specification, standardization, and regulation is projected. Then, we identify a dozen of potential technologies and introduce their principles, advantages, challenges, and open research issues. Finally, the conclusions are drawn to paint a picture of "What 6G may look like?". This survey is intended to serve as an enlightening guideline to spur interests and further investigations for subsequent research and development of 6G communications systems.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Impact of Short Blocklength Coding on Stability of an AGV Control System in Industry 4.0
Authors:
Shreya Tayade,
Peter Rost,
Andreas Maeder,
Hans D Schotten
Abstract:
With the advent of 5G and beyond, using wireless communication for closed-loop control and automation processes is one of the main aspects of the envisioned Industry 4.0. In this regard, a major challenge is to ensure a robust and stable control system over an unreliable wireless channel. One of the main use-cases in this context is Automated Guided Vehicle (AGV) control in a future factory. Speci…
▽ More
With the advent of 5G and beyond, using wireless communication for closed-loop control and automation processes is one of the main aspects of the envisioned Industry 4.0. In this regard, a major challenge is to ensure a robust and stable control system over an unreliable wireless channel. One of the main use-cases in this context is Automated Guided Vehicle (AGV) control in a future factory. Specifically, we consider a system where an AGV controller is placed in an edge cloud in the factory network infrastructure and the control commands are sent over a time-correlated Rayleigh fading channel. In an industrial control, short packets are exchanged between the controller and the actuator. Therefore, in this case, Shannon's assumption for an infinite block length is not applicable. The objective is to analyse the stability performance of an AGV control system in a Finite Block-Length (FBL) regime. We evaluate the coding rate required to maintain a stable edge cloud based AGV system. The results illustrate that adapting the control parameters can lower the stringent requirements on the coding rate. It reveals that a constant stability performance can be achieved even at higher coding rate by increasing the AGV's velocity. Moreover, this paper also determines the maximum number of AGVs that can be served seamlessly over the available communication resources while maintaining a stable control system.
△ Less
Submitted 2 October, 2020;
originally announced October 2020.
-
Platoon--assisted Vehicular Cloud in VANET: Vision and Challenges
Authors:
Meysam Nasimi,
Mohammad Asif Habibi,
Hans D. Schotten
Abstract:
Intelligent connected vehicles equipped with wireless sensors, intelligent control system, and communication devices are expected to commercially launch and emerge on road in short-term. These smart vehicles are able to partially/fully drive themselves; collect data from sensors, make and execute decisions based on that data; communicate with other vehicles, pedestrians, and nodes installed on the…
▽ More
Intelligent connected vehicles equipped with wireless sensors, intelligent control system, and communication devices are expected to commercially launch and emerge on road in short-term. These smart vehicles are able to partially/fully drive themselves; collect data from sensors, make and execute decisions based on that data; communicate with other vehicles, pedestrians, and nodes installed on the road; and provide infotainment and value-added services, such as broadband transmission of ultra-high definition video, files/apps downloading and uploading, online gaming, access to social media, audio/video conference streaming (office-in-car), live TV streaming, etc.; and so on. In addition, it is also possible for autonomous vehicles to form a "platoon" on road; maintaining close proximity in order to reduce the consumption of fuel and/or emission of gas, decrease costs, increase safety, and enhance the efficiency of the legacy transportation system. These emerging vehicular applications demand a large amount of computing and communication capacity to excel in their compute-intensive and latency-sensitive tasks. Based on these facts, the authors of this paper presented a visionary concept -- "platoon-assisted vehicular cloud" -- that exploits underutilized resources in platoons to augment vehicular cloud aiming to provide cost-effective and on-demand computing resources. Moreover, the authors presented three potential scenarios and explained the exploitation of platoon resources and roadside infrastructure to facilitate new applications. Besides system design, the paper did also summarize a number of open research challenges with the purpose of motivating new advances and potential solutions to this field.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.