-
Gaussian Process-Driven History Matching for Physical Layer Parameter Estimation in Optical Fiber Communication Networks
Authors:
Josh W. Nevin,
Sam Nallaperuma,
Seb J. Savory
Abstract:
We present a methodology for the estimation of optical network physical layer parameters from signal to noise ratio via history matching. An expensive network link simulator is emulated by a Gaussian process surrogate model, which is used to estimate a set of physical layer parameters from simulated ground truth data. The a priori knowledge assumed consists of broad parameter bounds obtained from…
▽ More
We present a methodology for the estimation of optical network physical layer parameters from signal to noise ratio via history matching. An expensive network link simulator is emulated by a Gaussian process surrogate model, which is used to estimate a set of physical layer parameters from simulated ground truth data. The a priori knowledge assumed consists of broad parameter bounds obtained from the literature and specification sheets of typical network components, and the physics-based model of the simulator. Accurate estimation of the physical layer parameters is demonstrated with a signal to noise ratio penalty of 1~dB or greater, using only 3 simulated measurements. The proposed approach is highly flexible, allowing for the calibration of any unknown simulator input from broad a priori bounds. The role of this method in the improvement of optical network modeling is discussed.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Perturbation-based Frequency Domain Linear and Nonlinear Noise Estimation
Authors:
F. J. Vaquero-Caballero,
D. J. Ives,
S. J. Savory
Abstract:
In this paper, a new method for the separation of noise categories based on Four-Wave Mixing is presented.
The theoretical analysis is grounded in the Gaussian Noise model and verified by split step simulations. The noise categories react differently to the introduced perturbations, by performing a set of perturbations the behaviour of the different categories can be separated by means of a leas…
▽ More
In this paper, a new method for the separation of noise categories based on Four-Wave Mixing is presented.
The theoretical analysis is grounded in the Gaussian Noise model and verified by split step simulations. The noise categories react differently to the introduced perturbations, by performing a set of perturbations the behaviour of the different categories can be separated by means of a least-square fitting. Given ASE is independent of the induced perturbations, it is possible to separate noise contributions. The analysis includes constant and variable power perturbations.
The estimation of the noise categories is discussed from two points of view: NSR evolution post-DSP processing, and over the power spectral density in a notched region. The NSR estimation can only be performed at reception, whereas the power spectral density approach can be performed along the optical link if a high resolution Optical Spectrum Analyzer is available.
Additionally, we perform a simple experimental verification considering of two WaveLogic 3 transceivers for the NSR, successfully estimating the noise contributions.
△ Less
Submitted 9 May, 2021;
originally announced May 2021.
-
Transceiver Noise Characterization based on Perturbations
Authors:
F. J. Vaquero-Caballero,
D. J. Ives,
S. J. Savory
Abstract:
In this paper, we discuss a new technique for measuring transceiver noise, skew, and for the detection of uncompensated transceiver impairments. The method consists on the introduction of frequency domain notch or notches at the transmitter, which allows to estimate of the Signal-to-Noise and Distortion Ratio (SNDR) at different stages over the transmission chain. The proposed technique requires t…
▽ More
In this paper, we discuss a new technique for measuring transceiver noise, skew, and for the detection of uncompensated transceiver impairments. The method consists on the introduction of frequency domain notch or notches at the transmitter, which allows to estimate of the Signal-to-Noise and Distortion Ratio (SNDR) at different stages over the transmission chain. The proposed technique requires the detection of the signal spectrum using either: a modem receiver, an Optical Spectrum Analyzer (OSA), an oscilloscope, or an Electrical Spectrum Analyzer (ESA), depending on the stage where the spectrum is measured and requiring minimal processing of the received signal.
Our analysis is focused on Ciena's WaveLogic Ai commercial transceiver and a 95 Gbaud DAC. We demonstrate that symmetrically placed frequency domain notches can be used to mitiguate the influence of crosstalk on the SNDR estimates.
Finally, we show how a single notch spectrum can be used to detect and compensate for impairments, and we perform skew estimation as an example.
△ Less
Submitted 3 April, 2021;
originally announced April 2021.
-
In-band Perturbation based OSNR Estimation
Authors:
F. J. Vaquero-Caballero,
D. Charlton,
M. E. Mousa-Pasandi,
D. J. Ives,
C. Laperle,
M. Hubbard,
M. Reimer,
M. OSullivan,
S. J. Savory
Abstract:
Perturbed spectra are modelled to estimate OSNR for a single channel amplified link. Perturbation-dependent nonlinear noise is separated from constant ASE noise using a set of propagated perturbed spectra. A least mean square fitting is used to estimate OSNR with standard deviation of 0.16 dB.
Perturbed spectra are modelled to estimate OSNR for a single channel amplified link. Perturbation-dependent nonlinear noise is separated from constant ASE noise using a set of propagated perturbed spectra. A least mean square fitting is used to estimate OSNR with standard deviation of 0.16 dB.
△ Less
Submitted 3 April, 2021; v1 submitted 17 October, 2020;
originally announced November 2020.
-
Comparison of Low Complexity Coherent Receivers for UDWDM-PONs ($λ$-to-the-user)
Authors:
M. Sezer Erkılınç,
Domaniç Lavery,
Kai Shi,
Benn C. Thomsen,
Robert I. Killey,
Seb J. Savory,
Polina Bayvel
Abstract:
It is predicted that demand in optical access networks will reach multi-Gb/s per user. However, the limited performance of the direct detection receiver technology currently used in the optical network units at the customers' premises restricts data rates/user. Therefore, the concept of coherent-enabled access networks has attracted attention in recent years, as this technology offers high receive…
▽ More
It is predicted that demand in optical access networks will reach multi-Gb/s per user. However, the limited performance of the direct detection receiver technology currently used in the optical network units at the customers' premises restricts data rates/user. Therefore, the concept of coherent-enabled access networks has attracted attention in recent years, as this technology offers high receiver sensitivity, inherent frequency selectivity, and linear field detection enabling the full compensation of linear channel impairments. However, the complexity of conventional (dual-polarisation digital) coherent receivers has so far prevented their introduction into access networks. Thus, to exploit the benefits of coherent technology in the ONUs, low complexity coherent receivers, suitable for implementation in ONUs, are needed. In this paper, the recently proposed low complexity coherent (i.e., polarisation-independent Alamouti-coding heterodyne) receiver is, for the first time, compared in terms of its minimum receiver sensitivity with five previously reported receiver designs, including a detailed discussion on their advantages and limitations. It is shown that the Alamouti-coding based receiver approach allows the lowest number of photons per bit (PPB) transmitted (with a lower bound of 15.5 PPB in an ideal system simulations) whilst requiring the lowest optical receiver hardware complexity. It also exhibits comparable complexity to the currently deployed direct-detection receivers, which typically require >1000 PPB. Finally, a comparison of experimentally achieved receiver sensitivities and transmission distances using these receivers is presented. The highest spectral efficiency and longest transmission distance at the highest bit rate reported using the Alamouti-coding receiver, which is also the only one, to date, to have been demonstrated in a full system bidirectional transmission.
△ Less
Submitted 28 February, 2018; v1 submitted 2 November, 2017;
originally announced November 2017.
