-
Planning 5G Networks for Rural Fixed Wireless Access
Authors:
Andrew Lappalainen,
Yuhao Zhang,
Catherine Rosenberg
Abstract:
We study the planning of a rural 5G multi-user massive MIMO fixed wireless access system to offer fixed broadband service to homes. Specifically, we aim to determine the user limit, i.e., the maximum number of homes that can simultaneously receive target minimum bit rates (MBRs) on the downlink (DL) and on the uplink (UL) given a set of network resources and a cell radius. To compute that limit, w…
▽ More
We study the planning of a rural 5G multi-user massive MIMO fixed wireless access system to offer fixed broadband service to homes. Specifically, we aim to determine the user limit, i.e., the maximum number of homes that can simultaneously receive target minimum bit rates (MBRs) on the downlink (DL) and on the uplink (UL) given a set of network resources and a cell radius. To compute that limit, we must understand how resources should be shared between the DL and UL and how user and stream selection, precoding and combining, and power distribution should be performed. We use block diagonalization and propose a static grou** strategy that organizes homes into fixed groups (of possibly different sizes) in the DL and UL; then we develop a simple approach to compute the user limit that we validate numerically. We study the impact of group size and show that smaller groups yield larger user limits in a 3.5 GHz band. We show how the user limit at different cell radii is impacted by the system bandwidth, the number of antennas at the base station and homes, the transmit power, and the DL and UL MBRs. Lastly, we offer insights into how the network could be operated.
△ Less
Submitted 17 August, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Multi-User Scheduling in Hybrid Millimeter Wave Massive MIMO Systems
Authors:
Seyedeh Maryam Hosseini,
Shahram Shahsavari,
Catherine Rosenberg
Abstract:
While mmWave bands provide a large bandwidth for mobile broadband services, they suffer from severe path loss and shadowing. Multiple-antenna techniques such as beamforming (BF) can be applied to compensate the signal attenuation. We consider a special case of hybrid BF called per-stream hybrid BF (PSHBF) which is easier to implement than the general hybrid BF because it circumvents the need for j…
▽ More
While mmWave bands provide a large bandwidth for mobile broadband services, they suffer from severe path loss and shadowing. Multiple-antenna techniques such as beamforming (BF) can be applied to compensate the signal attenuation. We consider a special case of hybrid BF called per-stream hybrid BF (PSHBF) which is easier to implement than the general hybrid BF because it circumvents the need for joint analog-digital beamformer optimization. Employing BF at the base station enables the transmission of multiple data streams to several users in the same resource block. In this paper, we provide an offline study of proportional fair multi-user scheduling in a mmWave system with PSHBF to understand the impact of various system parameters on the performance. We formulate multi-user scheduling as an optimization problem. To tackle the non-convexity, we provide a feasible solution and show through numerical examples that the performance of the provided solution is very close to an upper-bound. Using this framework, we provide extensive numerical investigations revealing several engineering insights.
△ Less
Submitted 12 September, 2021;
originally announced September 2021.
-
A General Framework for Airplane Air-to-Ground Communications in mmWave and Microwave Bands
Authors:
Ararat Shaverdian,
Shahram Shahsavari,
Catherine Rosenberg
Abstract:
Airplane sensors and on-board equipment collect an increasingly large amount of maintenance data during flights that are used for airplane maintenance. We propose to download part of the data during airplane's descent via a cellular base station (BS) located at the airport. We formulate and solve an offline optimization problem to quantify how much data can be offloaded in a non-dedicated band whi…
▽ More
Airplane sensors and on-board equipment collect an increasingly large amount of maintenance data during flights that are used for airplane maintenance. We propose to download part of the data during airplane's descent via a cellular base station (BS) located at the airport. We formulate and solve an offline optimization problem to quantify how much data can be offloaded in a non-dedicated band while ensuring that the interference at the terrestrial BSs in the vicinity of the airport remains below a maximum allowable threshold. Our problem allows for adaptive tuning of transmit power, number of frequency channels to be used, and beamforming according to the position of the plane on the descent path. Our results show that during the last 5 minutes of descent, in the microwave band the plane can offload up to 5 GB of maintenance data in a 20~MHz band, while in the mmWave band the plane can offload up to 24 times more data in a 1~GHz band. Beamforming, power and bandwidth tuning are all crucial in maintaining a good performance in the mmWave band while in the microwave band, dynamic tuning of bandwidth does not improve the performance much.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
Using Personal Environmental Comfort Systems to Mitigate the Impact of Occupancy Prediction Errors on HVAC Performance
Authors:
Milan Jain,
Rachel K Kalaimani,
Srinivasan Keshav,
Catherine Rosenberg
Abstract:
Heating, Ventilation and Air Conditioning (HVAC) consumes a significant fraction of energy in commercial buildings. Hence, the use of optimization techniques to reduce HVAC energy consumption has been widely studied. Model predictive control (MPC) is one state of the art optimization technique for HVAC control which converts the control problem to a sequence of optimization problems, each over a f…
▽ More
Heating, Ventilation and Air Conditioning (HVAC) consumes a significant fraction of energy in commercial buildings. Hence, the use of optimization techniques to reduce HVAC energy consumption has been widely studied. Model predictive control (MPC) is one state of the art optimization technique for HVAC control which converts the control problem to a sequence of optimization problems, each over a finite time horizon. In a typical MPC, future system state is estimated from a model using predictions of model inputs, such as building occupancy and outside air temperature. Consequently, as prediction accuracy deteriorates, MPC performance--in terms of occupant comfort and building energy use--degrades. In this work, we use a custom-built building thermal simulator to systematically investigate the impact of occupancy prediction errors on occupant comfort and energy consumption. Our analysis shows that in our test building, as occupancy prediction error increases from 5\% to 20\% the performance of an MPC-based HVAC controller becomes worse than that of even a simple static schedule. However, when combined with a personal environmental control (PEC) system, HVAC controllers are considerably more robust to prediction errors. Thus, we quantify the effectiveness of PECs in mitigating the impact of forecast errors on MPC control for HVAC systems.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
State Estimation in Power Distribution Systems Based on Ensemble Kalman Filtering
Authors:
C. Carquex,
C. Rosenberg,
K. Bhattacharya
Abstract:
State estimation in power distribution systems is a key component for increased reliability and optimal system performance. Well understood in transmission systems, state estimation is now an area of active research in distribution networks. While several snapshot-based approaches have been used to solve this problem, few solutions have been proposed in a dynamic framework. In this paper, a Past-A…
▽ More
State estimation in power distribution systems is a key component for increased reliability and optimal system performance. Well understood in transmission systems, state estimation is now an area of active research in distribution networks. While several snapshot-based approaches have been used to solve this problem, few solutions have been proposed in a dynamic framework. In this paper, a Past-Aware State Estimation (PASE) method is proposed for distribution systems that takes previous estimates into account to improve the accuracy of the current one, using an Ensemble Kalman Filter. Fewer phasor measurements units (PMU) are needed to achieve the same estimation error target than snapshot-based methods. Contrary to current methods, the proposed solution does not embed power flow equations into the estimator. A theoretical formulation is presented to compute a priori the advantages of the proposed method vis-a-vis the state-of-the-art. The proposed approach is validated considering the 33-bus distribution system and using power consumption traces from real households.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
On the Interaction between Personal Comfort Systems and Centralized HVAC Systems in Office Buildings
Authors:
Rachel Kalaimani,
Milan Jain,
Srinivasan Keshav,
Catherine Rosenberg
Abstract:
Most modern HVAC systems suffer from two intrinsic problems. First, inability to meet diverse comfort requirements of the occupants. Second, heat or cool an entire zone even when the zone is only partially occupied. Both issues can be mitigated by using personal comfort systems (PCS) which bridge the comfort gap between what is provided by a central HVAC system and the personal preferences of the…
▽ More
Most modern HVAC systems suffer from two intrinsic problems. First, inability to meet diverse comfort requirements of the occupants. Second, heat or cool an entire zone even when the zone is only partially occupied. Both issues can be mitigated by using personal comfort systems (PCS) which bridge the comfort gap between what is provided by a central HVAC system and the personal preferences of the occupants. In recent work, we have proposed and deployed such a system, called SPOT.
We address the question, "How should an existing HVAC system modify its operation to benefit the availability of PCS like SPOT?" For example, energy consumption could be reduced during sparse occupancy by choosing appropriate thermal set backs, with the PCS providing the additional offset in thermal comfort required for each occupant. Our control strategy based on Model Predictive Control (MPC), employs a bi-linear thermal model, and has two time-scales to accommodate the physical constraints that limit certain components of the central HVAC system from frequently changing their set points.
We compare the energy consumption and comfort offered by our SPOT-aware HVAC system with that of a state-of-the-art MPC-based central HVAC system in multiple settings including different room layouts and partial deployment of PCS. Numerical evaluations show that our system obtains, in average, 45% (15%) savings in energy in summer (winter), compared with the benchmark system for the case of homogeneous comfort requirements. For heterogeneous comfort requirements, we observe 51% (29%) improvement in comfort in summer (winter) in addition to significant savings in energy.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.
-
State of Charge Evolution Equations for Flywheels
Authors:
D. Fooladivanda,
G. Mancini,
S. Garg,
C. Rosenberg
Abstract:
A mathematical state-of-charge evolution equation is present for Flywheel Energy Storage Systems.
A mathematical state-of-charge evolution equation is present for Flywheel Energy Storage Systems.
△ Less
Submitted 6 November, 2014;
originally announced November 2014.