-
Exploring the limitations of blood pressure estimation using the photoplethysmography signal
Authors:
Felipe M. Dias,
Diego A. C. Cardenas,
Marcelo A. F. Toledo,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints.…
▽ More
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints. We developed a calibration-based Siamese ResNet model for BP estimation, using a signal input paired with a reference BP reading. We compared the use of normalized PPG (N-PPG) against the normalized Invasive Arterial Blood Pressure (N-IABP) signals as input. The N-IABP signals do not directly present systolic and diastolic values but theoretically provide a more accurate BP measure than PPG signals since it is a direct pressure sensor inside the body. Our strategy establishes a critical benchmark for PPG performance, realistically calibrating expectations for PPG's BP estimation capabilities. Nonetheless, we compared the performance of our models using different signal-filtering conditions to evaluate the impact of filtering on the results. We evaluated our method using the AAMI and the BHS standards employing the VitalDB dataset. The N-IABP signals meet with AAMI standards for both Systolic Blood Pressure (SBP) and Diastolic Blood Pressure (DBP), with errors of 1.29+-6.33mmHg for systolic pressure and 1.17+-5.78mmHg for systolic and diastolic pressure respectively for the raw N-IABP signal. In contrast, N-PPG signals, in their best setup, exhibited inferior performance than N-IABP, presenting 1.49+-11.82mmHg and 0.89+-7.27mmHg for systolic and diastolic pressure respectively. Our findings highlight the potential and limitations of employing PPG for BP estimation, showing that these signals contain information correlated to BP but may not be sufficient for predicting it accurately.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Exploring Deep Learning Image Super-Resolution for Iris Recognition
Authors:
Eduardo Ribeiro,
Andreas Uhl,
Fernando Alonso-Fernandez,
Reuben A. Farrugia
Abstract:
In this work we test the ability of deep learning methods to provide an end-to-end map** between low and high resolution images applying it to the iris recognition problem. Here, we propose the use of two deep learning single-image super-resolution approaches: Stacked Auto-Encoders (SAE) and Convolutional Neural Networks (CNN) with the most possible lightweight structure to achieve fast speed, p…
▽ More
In this work we test the ability of deep learning methods to provide an end-to-end map** between low and high resolution images applying it to the iris recognition problem. Here, we propose the use of two deep learning single-image super-resolution approaches: Stacked Auto-Encoders (SAE) and Convolutional Neural Networks (CNN) with the most possible lightweight structure to achieve fast speed, preserve local information and reduce artifacts at the same time. We validate the methods with a database of 1.872 near-infrared iris images with quality assessment and recognition experiments showing the superiority of deep learning approaches over the compared algorithms.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
A machine-learning sleep-wake classification model using a reduced number of features derived from photoplethysmography and activity signals
Authors:
Douglas A. Almeida,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning…
▽ More
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning during this essential period of rest. Photoplethysmography (PPG) has been demonstrated to be an effective signal for sleep stage inference, meaning it can be used on its own or in a combination with others signals to determine sleep stage. This information is valuable in identifying potential sleep issues and develo** strategies to improve sleep quality and overall health. In this work, we present a machine learning sleep-wake classification model based on the eXtreme Gradient Boosting (XGBoost) algorithm and features extracted from PPG signal and activity counts. The performance of our method was comparable to current state-of-the-art methods with a Sensitivity of 91.15 $\pm$ 1.16%, Specificity of 53.66 $\pm$ 1.12%, F1-score of 83.88 $\pm$ 0.56%, and Kappa of 48.0 $\pm$ 0.86%. Our method offers a significant improvement over other approaches as it uses a reduced number of features, making it suitable for implementation in wearable devices that have limited computational power.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
Machine Learning-Based Diabetes Detection Using Photoplethysmography Signal Features
Authors:
Filipe A. C. Oliveira,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PP…
▽ More
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PPG) for detecting diabetes. We classify non-Diabetic and Diabetic patients using the PPG signal and metadata for training Logistic Regression (LR) and eXtreme Gradient Boosting (XGBoost) algorithms. We used PPG signals from a publicly available dataset. To prevent overfitting, we divided the data into five folds for cross-validation. By ensuring that patients in the training set are not in the testing set, the model's performance can be evaluated on unseen subjects' data, providing a more accurate assessment of its generalization. Our model achieved an F1-Score and AUC of $58.8\pm20.0\%$ and $79.2\pm15.0\%$ for LR and $51.7\pm16.5\%$ and $73.6\pm17.0\%$ for XGBoost, respectively. Feature analysis suggested that PPG morphological features contains diabetes-related information alongside metadata. Our findings are within the same range reported in the literature, indicating that machine learning methods are promising for develo** remote, non-invasive, and continuous measurement devices for detecting and preventing diabetes.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Quality Assessment of Photoplethysmography Signals For Cardiovascular Biomarkers Monitoring Using Wearable Devices
Authors:
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate condition…
▽ More
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate conditions such as vasoconstriction or vasodilation, and provides information about microvascular blood flow, making it a valuable tool for monitoring cardiovascular health. However, PPG is subject to a number of sources of variations that can impact its accuracy and reliability, especially when using a wearable device for continuous monitoring, such as motion artifacts, skin pigmentation, and vasomotion. In this study, we extracted 27 statistical features from the PPG signal for training machine-learning models based on gradient boosting (XGBoost and CatBoost) and Random Forest (RF) algorithms to assess quality of PPG signals that were labeled as good or poor quality. We used the PPG time series from a publicly available dataset and evaluated the algorithm s performance using Sensitivity (Se), Positive Predicted Value (PPV), and F1-score (F1) metrics. Our model achieved Se, PPV, and F1-score of 94.4, 95.6, and 95.0 for XGBoost, 94.7, 95.9, and 95.3 for CatBoost, and 93.7, 91.3 and 92.5 for RF, respectively. Our findings are comparable to state-of-the-art reported in the literature but using a much simpler model, indicating that ML models are promising for develo** remote, non-invasive, and continuous measurement devices.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Historical traffic flow data reconstrucion applying Wavelet Transform
Authors:
E. R. Ribeiro,
A. L. Cunha
Abstract:
Despite the importance of fundamental parameters (traffic flow, density and speed) to describe the traffic behavior, there still are some difficulties in order to obtain and store this information. Furthermore, given the type of study or the project the resolution analysis interval can vary from less than one hour to annual. To create alternatives in database structures,this article aims to presen…
▽ More
Despite the importance of fundamental parameters (traffic flow, density and speed) to describe the traffic behavior, there still are some difficulties in order to obtain and store this information. Furthermore, given the type of study or the project the resolution analysis interval can vary from less than one hour to annual. To create alternatives in database structures,this article aims to present a method to reconstruct disaggregated historical data from aggregated data using Wavelet Transform. From the proposed method, it is possible to reconstruct data in short intervals from data with longer intervals,since they have the same behavior, for example, data from the same or similar highway. For such, a Detail coefficient is generated through the Discrete Wavelet Transform (DWT) with the disaggregated data. The aggregated data was reconstructed through an Approximation coefficient. After establishing these coefficients, the Inverse Wavelet Transform (IWT) is applied. The results indicated an average correlation between the reconstructed the original data of 0.960; 0.974; 0.968 and 0.960 for data initially aggregated at 10, 20, 40 and 80 minutes interval, respectively. The results also indicated an absolute mean error of 7.13%; 8.74%; 9.83% and 11.23% for data initially aggregated in 10, 20, 40 and 80 minutes, respectively. In other words, results suggest that the reconstituted data have a high correlation and a low percentage of mean absolute error with the original signal. In conclusion, the reconstruction of data from aggregated data and Wavelet Transform presents a good correlation and low average absolute error rate, comparable to traffic estimation studies (CASTRO-NETO et al., 2009; CORIC et al. 2012, LAM et al., 2006; LIM, 2001).
△ Less
Submitted 13 June, 2020;
originally announced June 2020.
