-
Addressing intra-area oscillations and frequency stability after DC segmentation of a large AC power system
Authors:
Mathieu Robin,
Javier Renedo,
Juan Carlos Gonzalez-Torres,
Aurelio Garcia-Cerrada,
Luis Rouco,
Abdelkrim Benchaib,
Pablo Garcia-Gonzalez
Abstract:
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternating Current (AC) power systems. Segmentation of AC power systems with High Voltage Direct Current (HVDC) systems (DC segmentation, for short) is a method that consists in turning large AC grids into a set of asynchronous AC clusters linked by HVDC links. It is a p…
▽ More
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternating Current (AC) power systems. Segmentation of AC power systems with High Voltage Direct Current (HVDC) systems (DC segmentation, for short) is a method that consists in turning large AC grids into a set of asynchronous AC clusters linked by HVDC links. It is a promising solution to mitigate electromechanical oscillations and other issues. In particular, an appropriately placed DC segmentation can stop a selected inter-area electromechanical oscillation mode. However, without supplementary controllers, DC segmentation will not contribute to the dam** of the intra-area oscillation modes in the remaining AC clusters and will deteriorate the frequency stability of the power system. This paper aims at filling this gap and proposes the use of DC segmentation with HVDC systems based on Voltage Source Converters (VSC-HVDC) with supplementary controllers in the converter stations: (a) active-power supplementary controllers for frequency support among the asynchronous AC clusters and (b) a reactive-power supplementary controllers for Power Oscillation Dam** (POD-Q), in order to damp the intra-area oscillation modes. The proposed supplementary controllers and their design will be presented, and their efficiency will be demonstrated on the Nordic 44 test system with DC segmentation by means of non-linear time-domain simulation and small-signal stability analysis.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Impact of current limiters and fast voltage boosters in grid-forming VSC-based generators on transient stability
Authors:
Régulo E. Ávila-Martínez,
Javier Renedo,
Luis Rouco,
Aurelio Garcia-Cerrada,
Lukas Sigrist,
Xavier Guillaud,
Taoufik Qoria
Abstract:
Transient stability is a complex phenomenon presented in multi-machine and multi-converter systems, and it is still considered a key limiting factor for stressed power systems. The increasing integration of non-synchronous generation further emphasises the need to address the challenges of improving the transient stability faced by these power systems. Several studies have focused on develo** co…
▽ More
Transient stability is a complex phenomenon presented in multi-machine and multi-converter systems, and it is still considered a key limiting factor for stressed power systems. The increasing integration of non-synchronous generation further emphasises the need to address the challenges of improving the transient stability faced by these power systems. Several studies have focused on develo** control strategies for GFM-VSCs to improve transient stability. These strategies include the use of current limiting algorithms and/or control of active/reactive power injections. This paper investigates the impact of fast voltage boosters (FVBs) and hybrid current limiters (HCLs) on transient stability of power systems with 100% grid-forming VSC-based generators. Short-circuit simulations and critical clearing time analysis are performed to evaluate the effectiveness of HCLs and FVBs in improving transient stability. The simulation results demonstrate the effectiveness of these approaches in avoiding the loss of synchronism. This research contributes to the current studies on transient stability in power systems and provides valuable insights into the potential of HCLs and FVBs as effective approaches to improve system stability.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
An algorithm for DC segmentation of AC power systems to mitigate electromechanical oscillations
Authors:
Mathieu Robin,
Javier Renedo,
Juan Carlos Gonzalez-Torres,
Aurelio Garcia-Cerrada,
Abdelkrim Benchaib,
Pablo Garcia-Gonzalez
Abstract:
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternative Current (AC) power systems. DC segmentation - a method that consist in turning large AC grids into a set of asynchronous AC clusters linked by Direct Current (DC) links - is a promising solution to mitigate this and other issues. However, no systematic segment…
▽ More
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternative Current (AC) power systems. DC segmentation - a method that consist in turning large AC grids into a set of asynchronous AC clusters linked by Direct Current (DC) links - is a promising solution to mitigate this and other issues. However, no systematic segmentation procedure for a given AC power system exists so far. This paper aims at filling this gap and proposes an algorithm for DC segmentation for a given AC power system to mitigate electromechanical oscillations. In this proposal, DC segmentation is implemented with High Voltage Direct Current links based on Voltage Source Converters (VSC-HVDC). The algorithm uses small-signal stability techniques and the concept of dominant inter-area oscillation paths to stop the main inter-area mode of the power system. The algorithm will be explained using a six-generator test system and it will then be used on the Nordic 44 test system. The proposed algorithm for DC segmentation has been validated by means of non-linear time-domain simulation and small-signal stability analysis (SSSA).
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Coordinated control in multi-terminal VSC-HVDC systems to improve transient stability: Impact on electromechanical-oscillation dam**
Authors:
Javier Renedo,
Luis Rouco,
Aurelio Garcia-Cerrada,
Lukas Sigrist
Abstract:
Multi-terminal high-voltage Direct Current technology based on Voltage-Source Converter stations (VSC-MTDC) is expected to be one of the most important contributors to the future of electric power systems. In fact, among other features, it has already been shown how this technology can contribute to improve transient stability in power systems by the use of supplementary controllers. Along this li…
▽ More
Multi-terminal high-voltage Direct Current technology based on Voltage-Source Converter stations (VSC-MTDC) is expected to be one of the most important contributors to the future of electric power systems. In fact, among other features, it has already been shown how this technology can contribute to improve transient stability in power systems by the use of supplementary controllers. Along this line, this paper will investigate in detail how these supplementary controllers may affect electromechanical oscillations, by means of small-signal stability analysis. The paper analyses two control strategies based on the modulation of active-power injections (P-WAF) and reactive-power injections (Q-WAF) in the VSC stations. Both control strategies use global signals of the frequencies of the VSC-MTDC system and they presented significant improvements on transient stability. The paper will provide guidelines for the design of these type of controllers to improve both, large- and small-disturbance angle stability. Small-signal stability techniques (in Matlab) will be used to assess electromechanical-oscillation dam**, while non-linear time domain simulation (in PSS/E) will be used to confirm the results. Results will be illustrated in Nordic32A test system with an embedded VSC-MTDC system. The paper analyses the impact of the controller gains and communication latency on electromechanical-oscillation dam**. The main conclusion of the paper is that transient-stability-tailored supplementary controllers in VSC-MTDC systems can be tuned to damp inter-area oscillations too, maintaining their effectiveness for transient-stability improvement.
△ Less
Submitted 29 July, 2022;
originally announced August 2022.
-
Fast voltage boosters to improve transient stability of power systems with 100% of grid-forming VSC-based generation
Authors:
Régulo E. Ávila-Martínez,
Javier Renedo,
Luis Rouco,
Aurelio García-Cerrada,
Lukas Sigrist,
Taoufik Qoria,
Xavier Guillaud
Abstract:
Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an open topic of research because it is still a key limiting factor for stressed power systems. Previous studies have proposed control strategies for GF-VSC to impro…
▽ More
Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an open topic of research because it is still a key limiting factor for stressed power systems. Previous studies have proposed control strategies for GF-VSC to improve transient stability of this type of systems by suitable current-limitation algorithms and/or control of active-power injections. As an alternative, this paper proposes two fast voltage boosters to improve transient stability of power systems with 100% of GF-VSC-based generation with virtual synchronous machine (VSM). One control strategy uses local measurements, whereas the other one uses global measurements of the frequency of the centre of inertia (COI). Both strategies improve transient stability of this type of systems significantly. The advantage of using fast voltage boosters for this purpose is that the set points linked to frequency/active-power injection (i.e set points linked to the primary energy source of the VSCs) will not be modified. Furthermore, strategies such as current-limitation, active-power control and fast voltage controllers for transient stability improvement are compatible and complementary.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Impact on power system transient stability of AC-line-emulation controllers of VSC-HVDC links
Authors:
Javier Renedo,
Lukas Sigrist,
Luis Rouco,
Aurelio Garcia-Cerrada
Abstract:
High voltage direct current links based on voltage source converters (VSC-HVDC) embedded in alternating current (AC) systems are receiving a great deal of attention recently because they can contribute positively to the flexibilisation of modern power systems. Among several possibilities, AC-line-emulation control has been highlighted as an simple-but-useful alternative for these type of systems.…
▽ More
High voltage direct current links based on voltage source converters (VSC-HVDC) embedded in alternating current (AC) systems are receiving a great deal of attention recently because they can contribute positively to the flexibilisation of modern power systems. Among several possibilities, AC-line-emulation control has been highlighted as an simple-but-useful alternative for these type of systems. With this strategy, the power flow through the link is controlled proportionally to the angle difference between its two AC terminals and this provides self-adaptation of the power flow in case of contingencies in the parallel AC lines, naturally. Although this controller is mainly concerned with steady state, it can also have an impact on the dynamic behaviour of the system, which has not been sufficiently analysed. Along this line, this paper analyses the impact of AC-line-emulation controllers of VSC-HVDC on power system transient stability. Nonlinear time-domain simulations were carried out by using PSS/E on a small test system with an embedded point-to-point VSC-HVDC link. The critical clearing time (CCT) of a test fault has been used to assess transient-stability margins of the whole system. The paper provides recommendations for the design of AC-line-emulation controllers in order to ensure that transient stability is not jeopardised.
△ Less
Submitted 30 April, 2021;
originally announced April 2021.
