-
R-NeRF: Neural Radiance Fields for Modeling RIS-enabled Wireless Environments
Authors:
Huiying Yang,
Zihan **,
Chenhao Wu,
Ru**g Xiong,
Robert Caiming Qiu,
Zenan Ling
Abstract:
Recently, ray tracing has gained renewed interest with the advent of Reflective Intelligent Surfaces (RIS) technology, a key enabler of 6G wireless communications due to its capability of intelligent manipulation of electromagnetic waves. However, accurately modeling RIS-enabled wireless environments poses significant challenges due to the complex variations caused by various environmental factors…
▽ More
Recently, ray tracing has gained renewed interest with the advent of Reflective Intelligent Surfaces (RIS) technology, a key enabler of 6G wireless communications due to its capability of intelligent manipulation of electromagnetic waves. However, accurately modeling RIS-enabled wireless environments poses significant challenges due to the complex variations caused by various environmental factors and the mobility of RISs. In this paper, we propose a novel modeling approach using Neural Radiance Fields (NeRF) to characterize the dynamics of electromagnetic fields in such environments. Our method utilizes NeRF-based ray tracing to intuitively capture and visualize the complex dynamics of signal propagation, effectively modeling the complete signal pathways from the transmitter to the RIS, and from the RIS to the receiver. This two-stage process accurately characterizes multiple complex transmission paths, enhancing our understanding of signal behavior in real-world scenarios. Our approach predicts the signal field for any specified RIS placement and receiver location, facilitating efficient RIS deployment. Experimental evaluations using both simulated and real-world data validate the significant benefits of our methodology.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Optimal Configuration of Reconfigurable Intelligent Surfaces With Non-uniform Phase Quantization
Authors:
Jialong Lu,
Ru**g Xiong,
Tiebin Mi,
Ke Yin,
Robert Caiming Qiu
Abstract:
The existing methods for Reconfigurable Intelligent Surface (RIS) beamforming in wireless communication are typically limited to uniform phase quantization. However, in real world applications, the phase and bit resolution of RIS units are often non-uniform due to practical requirements and engineering challenges. To fill this research gap, we formulate an optimization problem for discrete non-uni…
▽ More
The existing methods for Reconfigurable Intelligent Surface (RIS) beamforming in wireless communication are typically limited to uniform phase quantization. However, in real world applications, the phase and bit resolution of RIS units are often non-uniform due to practical requirements and engineering challenges. To fill this research gap, we formulate an optimization problem for discrete non-uniform phase configuration in RIS assisted multiple-input single-output (MISO) communications. Subsequently, a partition-and-traversal (PAT) algorithm is proposed to solve that, achieving the global optimal solution. The efficacy and superiority of the PAT algorithm are validated through numerical simulations, and the impact of non-uniform phase quantization on system performance is analyzed.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Optimal Beamforming of RIS-Aided Wireless Communications: An Alternating Inner Product Maximization Approach
Authors:
Ru**g Xiong,
Tiebin Mi,
Jialong Lu,
Ke Yin,
Kai Wan,
Fuhai Wang,
Robert Caiming Qiu
Abstract:
This paper investigates a general discrete $\ell_p$-norm maximization problem, with the power enhancement at steering directions through reconfigurable intelligent surfaces (RISs) as an instance. We propose a mathematically concise iterative framework composed of alternating inner product maximizations, well-suited for addressing $\ell_1$- and $\ell_2$-norm maximizations with either discrete or co…
▽ More
This paper investigates a general discrete $\ell_p$-norm maximization problem, with the power enhancement at steering directions through reconfigurable intelligent surfaces (RISs) as an instance. We propose a mathematically concise iterative framework composed of alternating inner product maximizations, well-suited for addressing $\ell_1$- and $\ell_2$-norm maximizations with either discrete or continuous uni-modular variable constraints. The iteration is proven to be monotonically non-decreasing. Moreover, this framework exhibits a distinctive capability to mitigate performance degradation due to discrete quantization, establishing it as the first post-rounding lifting approach applicable to any algorithm intended for the continuous solution. Additionally, as an integral component of the alternating iterations framework, we present a divide-and-sort (DaS) method to tackle the discrete inner product maximization problem. In the realm of $\ell_\infty$-norm maximization with discrete uni-modular constraints, the DaS ensures the identification of the global optimum with polynomial search complexity. We validate the effectiveness of the alternating inner product maximization framework in beamforming through RISs using both numerical experiments and field trials on prototypes. The results demonstrate that the proposed approach achieves higher power enhancement and outperforms other competitors. Finally, we show that discrete phase configurations with moderate quantization bits (e.g., 4-bit) exhibit comparable performance to continuous configurations in terms of power gains.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Multi-user ISAC through Stacked Intelligent Metasurfaces: New Algorithms and Experiments
Authors:
Ziqing Wang,
Hongzheng Liu,
Jianan Zhang,
Ru**g Xiong,
Kai Wan,
Xuewen Qian,
Marco Di Renzo,
Robert Caiming Qiu
Abstract:
This paper investigates a Stacked Intelligent Metasurfaces (SIM)-assisted Integrated Sensing and Communications (ISAC) system. An extended target model is considered, where the BS aims to estimate the complete target response matrix relative to the SIM. Under the constraints of minimum Signal-to-Interference-plus-Noise Ratio (SINR) for the communication users (CUs) and maximum transmit power, we j…
▽ More
This paper investigates a Stacked Intelligent Metasurfaces (SIM)-assisted Integrated Sensing and Communications (ISAC) system. An extended target model is considered, where the BS aims to estimate the complete target response matrix relative to the SIM. Under the constraints of minimum Signal-to-Interference-plus-Noise Ratio (SINR) for the communication users (CUs) and maximum transmit power, we jointly optimize the transmit beamforming at the base station (BS) and the end-to-end transmission matrix of the SIM, to minimize the Cramér-Rao Bound (CRB) for target estimation. Effective algorithms such as the alternating optimization (AO) and semidefinite relaxation (SDR) are employed to solve the non-convex SINR-constrained CRB minimization problem. Finally, we design and build an experimental platform for SIM, and evaluate the performance of the proposed algorithms for communication and sensing tasks.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
RISAR: RIS-assisted Human Activity Recognition with Commercial Wi-Fi Devices
Authors:
Junshuo Liu,
Yunlong Huang,
Wei Yang,
Zhe Li,
Ru**g Xiong,
Tiebin Mi,
Xin Shi,
Robert C. Qiu
Abstract:
Human activity recognition (HAR) holds significant importance in smart homes, security, and healthcare. Existing systems face limitations because of the insufficient spatial diversity provided by a limited number of antennas. Furthermore, inefficiencies in noise reduction and feature extraction from sensing data pose challenges to recognition performance. This study presents a reconfigurable intel…
▽ More
Human activity recognition (HAR) holds significant importance in smart homes, security, and healthcare. Existing systems face limitations because of the insufficient spatial diversity provided by a limited number of antennas. Furthermore, inefficiencies in noise reduction and feature extraction from sensing data pose challenges to recognition performance. This study presents a reconfigurable intelligent surface (RIS)-assisted passive human activity recognition (RISAR) method, compatible with commercial Wi-Fi devices. RISAR leverages a RIS to enhance the spatial diversity of Wi-Fi signals, effectively capturing a wider range of information distributed across the spatial domain. A novel high-dimensional factor model based on random matrix theory is proposed to address noise reduction and feature extraction in the temporal domain. A dual-stream spatial-temporal attention network model is developed to assign variable weights to different characteristics and sequences, mimicking human cognitive processes in prioritizing essential information. Experimental analysis shows that RISAR significantly outperforms existing HAR methods in accuracy and efficiency, achieving an average accuracy of 97.26%. These findings underscore RISAR's adaptability and potential as a robust activity recognition solution in real environments.
△ Less
Submitted 20 March, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Design and Prototy** of Transmissive RIS-Aided Wireless Communication
Authors:
Jianan Zhang,
Ru**g Xiong,
Junshuo Liu,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
Reconfigurable Intelligent Surfaces (RISs) exhibit promising enhancements in coverage and data rates for wireless communication systems, particularly in the context of 5G and beyond. This paper introduces a novel approach by focusing on the design and prototy** of a transmissive RIS, contrasting with existing research predominantly centered on reflective RIS. The achievement of 1-bit transmissiv…
▽ More
Reconfigurable Intelligent Surfaces (RISs) exhibit promising enhancements in coverage and data rates for wireless communication systems, particularly in the context of 5G and beyond. This paper introduces a novel approach by focusing on the design and prototy** of a transmissive RIS, contrasting with existing research predominantly centered on reflective RIS. The achievement of 1-bit transmissive RIS through the antisymmetry configuration of the two PIN diodes, nearly uniform transmission magnitudes but inversed phase states in a wide band can be obtained. A transmissive RIS prototype consisting of 16 $\times$ 16 elements is meticulously designed, fabricated, and subjected to measurement to validate the proposed design. The results demonstrate that the proposed RIS unit cell achieves effective 1-bit phase tuning with minimal insertion loss and a transmission bandwidth of 3 dB exceeding $20\%$ at 5.8GHz. By dynamically modulating the quantized code distributions on the RIS, it becomes possible to construct scanning beams. The experimental outcomes of the RIS-assisted communication system validate that, in comparison to scenarios without RIS, the signal receiving power experiences an increase of approximately 7dB when RIS is deployed to overcome obstacles. This underscores the potential applicability of mobile RIS in practical communication.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
TRTAR: Transmissive RIS-assisted Through-the-wall Human Activity Recognition
Authors:
Junshuo Liu,
Yunlong Huang,
Jianan Zhang,
Ru**g Xiong,
Robert Caiming Qiu
Abstract:
Device-free human activity recognition plays a pivotal role in wireless sensing. However, current systems often fail to accommodate signal transmission through walls or necessitate dedicated noise removal algorithms. To overcome these limitations, we introduce TRTAR: a device-free passive human activity recognition system integrated with a transmissive reconfigurable intelligent surface (RIS). TRT…
▽ More
Device-free human activity recognition plays a pivotal role in wireless sensing. However, current systems often fail to accommodate signal transmission through walls or necessitate dedicated noise removal algorithms. To overcome these limitations, we introduce TRTAR: a device-free passive human activity recognition system integrated with a transmissive reconfigurable intelligent surface (RIS). TRTAR eliminates the necessity for dedicated devices or noise removal algorithms, while specifically addressing signal propagation through walls. Unlike existing approaches, TRTAR solely employs a transmissive RIS at the transmitter or receiver without modifying the inherent hardware structure. Experimental results demonstrate that TRTAR attains an average accuracy of 98.13% when signals traverse concrete walls.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Asymptotic CRB Analysis of Random RIS-Assisted Large-Scale Localization Systems
Authors:
Zhengyu Wang,
Hongzheng Liu,
Ru**g Xiong,
Fuhai Wang,
Robert Caiming Qiu
Abstract:
This paper studies the performance of a randomly RIS-assisted multi-target localization system, in which the configurations of the RIS are randomly set to avoid high-complexity optimization. We first focus on the scenario where the number of RIS elements is significantly large, and then obtain the scaling law of Cramér-Rao bound (CRB) under certain conditions, which shows that CRB decreases in the…
▽ More
This paper studies the performance of a randomly RIS-assisted multi-target localization system, in which the configurations of the RIS are randomly set to avoid high-complexity optimization. We first focus on the scenario where the number of RIS elements is significantly large, and then obtain the scaling law of Cramér-Rao bound (CRB) under certain conditions, which shows that CRB decreases in the third or fourth order as the RIS dimension increases. Second, we extend our analysis to large systems where both the number of targets and sensors is substantial. Under this setting, we explore two common RIS models: the constant module model and the discrete amplitude model, and illustrate how the random RIS configuration impacts the value of CRB. Numerical results demonstrate that asymptotic formulas provide a good approximation to the exact CRB in the proposed randomly configured RIS systems.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Wireless Regional Imaging through Reconfigurable Intelligent Surfaces: Passive Mode
Authors:
Fuhai Wang,
Chun Wang,
Ru**g Xiong,
Zhengyu Wang,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
In this paper, we propose a multi-RIS-aided wireless imaging framework in 3D facing the distributed placement of multi-sensor networks. The system creates a randomized reflection pattern by adjusting the RIS phase shift, enabling the receiver to capture signals within the designated space of interest (SoI). Firstly, a multi-RIS-aided linear imaging channel modeling is proposed. We introduce a theo…
▽ More
In this paper, we propose a multi-RIS-aided wireless imaging framework in 3D facing the distributed placement of multi-sensor networks. The system creates a randomized reflection pattern by adjusting the RIS phase shift, enabling the receiver to capture signals within the designated space of interest (SoI). Firstly, a multi-RIS-aided linear imaging channel modeling is proposed. We introduce a theoretical framework of computational imaging to recover the signal strength distribution of the SOI. For the RIS-aided imaging system, the impact of multiple parameters on the performance of the imaging system is analyzed. The simulation results verify the correctness of the proposal. Furthermore, we propose an amplitude-only imaging algorithm for the RIS-aided imaging system to mitigate the problem of phase unpredictability. Finally, the performance verification of the imaging algorithm is carried out by proof of concept experiments under reasonable parameter settings.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
Wireless Communications in Cavity: A Reconfigurable Boundary Modulation based Approach
Authors:
Xuehui Dong,
Xiang Ren,
Bokai Lai,
Ru**g Xiong,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
This paper explores the potential wireless communication applications of Reconfigurable Intelligent Surfaces (RIS) in reverberant wave propagation environments. Unlike in free space, we utilize the sensitivity to boundaries of the enclosed electromagnetic (EM) field and the equivalent perturbation of RISs. For the first time, we introduce the framework of reconfigurable boundary modulation in the…
▽ More
This paper explores the potential wireless communication applications of Reconfigurable Intelligent Surfaces (RIS) in reverberant wave propagation environments. Unlike in free space, we utilize the sensitivity to boundaries of the enclosed electromagnetic (EM) field and the equivalent perturbation of RISs. For the first time, we introduce the framework of reconfigurable boundary modulation in the cavities . We have proposed a robust boundary modulation scheme that exploits the continuity of object motion and the mutation of the codebook switch, which achieves pulse position modulation (PPM) by RIS-generated equivalent pulses for wireless communication in cavities. This approach achieves around 2 Mbps bit rate in the prototype and demonstrates strong resistance to channel's frequency selectivity resulting in an extremely low bit error rate (BER).
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
A Wi-Fi Signal-Based Human Activity Recognition Using High-Dimensional Factor Models
Authors:
Junshuo Liu,
Fuhai Wang,
Zhe Li,
Ru**g Xiong,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
Passive sensing techniques based on Wi-Fi signals have emerged as a promising technology in advanced wireless communication systems due to their widespread application and cost-effectiveness. However, the proliferation of low-cost Internet of Things (IoT) devices has led to dense network deployments, resulting in increased levels of noise and interference in Wi-Fi environments. This, in turn, lead…
▽ More
Passive sensing techniques based on Wi-Fi signals have emerged as a promising technology in advanced wireless communication systems due to their widespread application and cost-effectiveness. However, the proliferation of low-cost Internet of Things (IoT) devices has led to dense network deployments, resulting in increased levels of noise and interference in Wi-Fi environments. This, in turn, leads to noisy and redundant Channel State Information (CSI) data. As a consequence, the accuracy of human activity recognition based on Wi-Fi signals is compromised. To address this issue, we propose a novel CSI data signal extraction method. We established a human activity recognition system based on the Intel 5300 network interface cards (NICs) and collected a dataset containing six categories of human activities. Using our approach, signals extracted from the CSI data serve as inputs to machine learning (ML) classification algorithms to evaluate classification performance. In comparison to ML methods based on Principal Component Analysis (PCA), our proposed High-Dimensional Factor Model (HDFM) method improves recognition accuracy by 6.8%.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
RIS-aided Real-time Beam Tracking for a Mobile User via Bayesian Optimization
Authors:
Junshuo Liu,
Ru**g Xiong,
Jialong Lu,
Tiebin Mi,
Robert C. Qiu
Abstract:
The conventional beam management procedure mandates that the user equipment (UE) periodically measure the received signal reference power (RSRP) and transmit these measurements to the base station (BS). The challenge lies in balancing the number of beams used: it should be large enough to identify high-RSRP beams but small enough to minimize reporting overhead. This paper investigates this essenti…
▽ More
The conventional beam management procedure mandates that the user equipment (UE) periodically measure the received signal reference power (RSRP) and transmit these measurements to the base station (BS). The challenge lies in balancing the number of beams used: it should be large enough to identify high-RSRP beams but small enough to minimize reporting overhead. This paper investigates this essential performance-versus-overhead trade-off using Bayesian optimization. The proposed approach represents the first application of real-time beam tracking via Bayesian optimization in RIS-assisted communication systems. Simulation results validate the effectiveness of this scheme.
△ Less
Submitted 29 October, 2023;
originally announced October 2023.
-
Fair Beam Allocations through Reconfigurable Intelligent Surfaces
Authors:
Ru**g Xiong,
Ke Yin,
Tiebin Mi,
Jialong Lu,
Kai Wan,
Robert Caiming Qiu
Abstract:
A fair beam allocation framework through reconfigurable intelligent surfaces (RISs) is proposed, incorporating the Max-min criterion. This framework focuses on designing explicit beamforming functionalities through optimization. Firstly, realistic models, grounded in geometrical optics, are introduced to characterize the input/output behaviors of RISs, effectively bridging the gap between the requ…
▽ More
A fair beam allocation framework through reconfigurable intelligent surfaces (RISs) is proposed, incorporating the Max-min criterion. This framework focuses on designing explicit beamforming functionalities through optimization. Firstly, realistic models, grounded in geometrical optics, are introduced to characterize the input/output behaviors of RISs, effectively bridging the gap between the requirements on explicit beamforming operations and their practical implementations. Then, a highly efficient algorithm is developed for Max-min optimizations involving quadratic forms. Leveraging the Moreau-Yosida approximation, we successfully reformulate the original problem and propose iterations to attain the optimal solution. A comprehensive analysis of the algorithm's convergence is provided. Importantly, this approach exhibits excellent extensibility, making it readily applicable to address a broader class of Max-min optimization problems. Finally, numerical and prototype experiments are conducted to validate the effectiveness of the framework. With the proposed beam allocation framework and algorithm, we clarify that several crucial redistribution functionalities of RISs, such as explicit beam-splitting, fair beam allocation, and wide-beam generation, can be effectively implemented. These explicit beamforming functionalities have not been thoroughly examined previously.
△ Less
Submitted 7 December, 2023; v1 submitted 24 October, 2023;
originally announced October 2023.
-
Codebook Configuration for RIS-aided Systems via Implicit Neural Representations
Authors:
Huiying Yang,
Ru**g Xiong,
Yao Xiao,
Zhijie Fan,
Tiebin Mi,
Robert Caiming Qiu,
Zenan Ling
Abstract:
Reconfigurable Intelligent Surface (RIS) is envisioned to be an enabling technique in 6G wireless communications. By configuring the reflection beamforming codebook, RIS focuses signals on target receivers to enhance signal strength. In this paper, we investigate the codebook configuration for RIS-aided communication systems. We formulate an implicit relationship between user's coordinates informa…
▽ More
Reconfigurable Intelligent Surface (RIS) is envisioned to be an enabling technique in 6G wireless communications. By configuring the reflection beamforming codebook, RIS focuses signals on target receivers to enhance signal strength. In this paper, we investigate the codebook configuration for RIS-aided communication systems. We formulate an implicit relationship between user's coordinates information and the codebook from the perspective of signal radiation mechanisms, and introduce a novel learning-based method, implicit neural representations (INRs), to solve this implicit coordinates-to-codebook map** problem. Our approach requires only user's coordinates, avoiding reliance on channel models. Additionally, given the significant practical applications of the 1-bit RIS, we formulate the 1-bit codebook configuration as a multi-label classification problem, and propose an encoding strategy for 1-bit RIS to reduce the codebook dimension, thereby improving learning efficiency. Experimental results from simulations and measured data demonstrate significant advantages of our method.
△ Less
Submitted 28 November, 2023; v1 submitted 1 June, 2023;
originally announced June 2023.
-
Design of Reconfigurable Intelligent Surfaces for Wireless Communication: A Review
Authors:
Ru**g Xiong,
Jianan Zhang,
Fuhai Wang,
Zhengyu Wang,
Xiang Ren,
Junshuo Liu,
Jialong Lu,
Kai Wan,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
This paper addresses the hardware structure of Reconfigurable Intelligent Surfaces (RIS) and presents a comprehensive overview of RIS design, considering both unit design and prototype systems. It commences by tracing the evolutionary trajectory of RIS, originating from static cell-structured hypersurfaces. The article conducts a meticulous examination from the standpoint of adaptability, elucidat…
▽ More
This paper addresses the hardware structure of Reconfigurable Intelligent Surfaces (RIS) and presents a comprehensive overview of RIS design, considering both unit design and prototype systems. It commences by tracing the evolutionary trajectory of RIS, originating from static cell-structured hypersurfaces. The article conducts a meticulous examination from the standpoint of adaptability, elucidating the diverse array of unit structures and design philosophies that underlie existing RIS frameworks. Following this, the study systematically categorizes and synthesizes channel modeling research for RIS-facilitated wireless communication, leveraging both physical insights and statistical data. Additionally, the article provides a detailed exposition of current RIS experimental setups and their corresponding empirical findings, delving into the attributes of prototype design and system functionalities. Moreover, this work introduces an in-house developed RIS prototype. The prototype undergoes rigorous empirical evaluation, encompassing multi-hop RIS signal amplification, image reconstruction, and real-world indoor signal coverage experiments. The empirical results robustly affirm the efficacy of RIS in effectively mitigating signal coverage blind spots and enabling radio wave imaging. With RIS-enhanced augmentation, the average indoor signal gain surpasses 8 dB.
△ Less
Submitted 24 October, 2023; v1 submitted 27 April, 2023;
originally announced April 2023.
-
Multi-RIS-aided Wireless Communications in Real-world: Prototy** and Field Trials
Authors:
Ru**g Xiong,
Jianan Zhang,
Xuehui Dong,
Zhengyu Wang,
Junshuo Liu,
Wei Yang,
Tiebin Mi,
Wenbo Huang,
Robert Caiming Qiu
Abstract:
The performance of multiple reconfigurable intelligent surfaces (RISs) receives limited attention in previous studies. This article fills this research gap by investigating the capabilities of multiple RISs in real-world networks. We propose a simplified yet highly scalable sandwich architecture for implementing one-bit unit cells, with the flexibility to accommodate multi-bit unit cells. To effec…
▽ More
The performance of multiple reconfigurable intelligent surfaces (RISs) receives limited attention in previous studies. This article fills this research gap by investigating the capabilities of multiple RISs in real-world networks. We propose a simplified yet highly scalable sandwich architecture for implementing one-bit unit cells, with the flexibility to accommodate multi-bit unit cells. To effectively control multiple RISs, we present a cost-effective remote-controlling scheme and develop a cloud-based RIS management system. Through a series of four field trials, we demonstrate the effectiveness of multi-hop routing schemes in establishing reliable links. Our experiments reveal significant improvements in signal strength and data transmission in multi-RIS-aided Wi-Fi and commercial 5G networks. Furthermore, we investigate the power scaling law of RIS-aided beamforming and provide insights into the roles of the later nodes in multi-hop relay chains.
△ Less
Submitted 1 July, 2023; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Transforming RIS-Assisted Passive Beamforming from Tedious to Simple: A Relaxation Algorithm for Rician Channel
Authors:
Xuehui Dong,
Ru**g Xiong,
Tiebin Mi,
Yuan Xie,
Robert Caiming Qiu
Abstract:
This paper investigates the problem of maximizing the signal-to-noise ratio (SNR) in reconfigurable intelligent surface (RIS)-assisted MISO communication systems. The problem will be reformulated as a complex quadratic form problem with unit circle constraints. We proved that the SNR maximizing problem has a closed-form global optimal solution when it is a rank-one problem, whereas the former rese…
▽ More
This paper investigates the problem of maximizing the signal-to-noise ratio (SNR) in reconfigurable intelligent surface (RIS)-assisted MISO communication systems. The problem will be reformulated as a complex quadratic form problem with unit circle constraints. We proved that the SNR maximizing problem has a closed-form global optimal solution when it is a rank-one problem, whereas the former researchers regarded it as an optimization problem. Moreover, We propose a relaxation algorithm (RA) that relaxes the constraints to that of Rayleigh's quotient problem and then projects the solution back, where the SNR obtained by RA achieves much the same SNR as the upper bound but with significantly low time consumption. Then we asymptotically analyze its performance when the transmitter antennas n_t and the number of units of RIS N grow large together, with N/n_t -> c. Finally, our numerical simulations show that RA achieves over 98% of the performance of the upper bound and takes below 1% time consumption of manifold optimization (MO) and 0.1% of semidefinite relaxation (SDR).
△ Less
Submitted 21 November, 2022; v1 submitted 11 November, 2022;
originally announced November 2022.
-
Optimal Discrete Beamforming of RIS-Aided Wireless Communications: An Inner Product Maximization Approach
Authors:
Ru**g Xiong,
Xuihui Dong,
Tiebin Mi,
Kai Wan,
Robert Caiming Qiu
Abstract:
This paper studies the beamforming optimization challenge in reconfigurable intelligent surface (RIS)-aided multiple-input single-output (MISO) systems, where the RIS phase configuration is discrete. Conventional optimization methods for this discrete optimization problem necessitate resource-intensive exponential search and thus fall within the universal (NP-hard) category. We formally define thi…
▽ More
This paper studies the beamforming optimization challenge in reconfigurable intelligent surface (RIS)-aided multiple-input single-output (MISO) systems, where the RIS phase configuration is discrete. Conventional optimization methods for this discrete optimization problem necessitate resource-intensive exponential search and thus fall within the universal (NP-hard) category. We formally define this task as a discrete inner product maximization problem. Leveraging the inherent structure of this problem, we propose an efficient divide-and-sort (DaS) search algorithm to reach the global optimality for the maximization problem. The complexity of the proposed algorithm can be minimized to $\mathcal{O}(2^BN)$, a linear correlation with the count of phase discrete levels $2^B$ and reflecting units $N$. This is notably lower than the exhaustive search complexity of $\mathcal{O}(2^{BN})$. Numerical evaluations and experiments over real prototype also demonstrate the efficiency of the proposed DaS algorithm. Finally, by using the proposed algorithm, we show that over some resolution quantization level on each RIS unit (4-bit and above), there is no noticeable difference in power gains between continuous and discrete phase configurations.
△ Less
Submitted 14 January, 2024; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Joint Beamforming Design and 3D DoA Estimation for RIS-aided Communication System
Authors:
Zhengyu Wang,
Wei Yang,
Tiebin Mi,
Robert Caiming Qiu
Abstract:
In this paper, we consider a reconfigurable intelligent surface (RIS)-assisted 3D direction-of-arrival (DoA) estimation system, in which a uniform planar array (UPA) RIS is deployed to provide virtual line-of-sight (LOS) links and reflect the uplink pilot signal to sensors. To overcome the mutually coupled problem between the beamforming design at the RIS and DoA estimation, we explore the separab…
▽ More
In this paper, we consider a reconfigurable intelligent surface (RIS)-assisted 3D direction-of-arrival (DoA) estimation system, in which a uniform planar array (UPA) RIS is deployed to provide virtual line-of-sight (LOS) links and reflect the uplink pilot signal to sensors. To overcome the mutually coupled problem between the beamforming design at the RIS and DoA estimation, we explore the separable sparse representation structure and propose an alternating optimization algorithm. The grid-based DoA estimation is modeled as a joint-sparse recovery problem considering the grid bias, and the Joint-2D-OMP method is used to estimate both on-grid and off-grid parts. The corresponding Cramér-Rao lower bound (CRLB) is derived to evaluate the estimation. Then, the beampattern at the RIS is optimized to maximize the signal-to-noise (SNR) at sensors according to the estimated angles. Numerical results show that the proposed alternating optimization algorithm can achieve lower estimation error compared to benchmarks of random beamforming design.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
RIS-aided Wireless Communication with $1$-bit Discrete Optimization for Signal Enhancement
Authors:
Ru**g Xiong,
Xuehui Dong,
Tiebin Mi,
Robert caiming Qiu
Abstract:
In recent years, a brand-new technology, reconfigurable intelligent surface (RIS) has been widely studied for reconfiguring the wireless propagation environment. RIS is an artificial surface of electromagnetic material that is capable of customizing the propagation of the wave im**ing upon it. Utilizing RIS for communication service like signal enhancement usually lead to non-convex optimization…
▽ More
In recent years, a brand-new technology, reconfigurable intelligent surface (RIS) has been widely studied for reconfiguring the wireless propagation environment. RIS is an artificial surface of electromagnetic material that is capable of customizing the propagation of the wave im**ing upon it. Utilizing RIS for communication service like signal enhancement usually lead to non-convex optimization problems. Existing optimization methods either suffers from scalability issues for $N$ number of RIS elements large, or may lead to suboptimal solutions in some scenario. In this paper, we propose a divide-and-sort (DaS) discrete optimization approach, that is guaranteed to find the global optimal phase shifts for $1$-bit RIS, and has time complexity $\mathcal{O}(N \log(N))$. Numerical experiments show that the proposed approach achieves a better ``performance--complexity tradeoff'' over other methods for $1$-bit RIS.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
Towards Analytical Electromagnetic Models for Reconfigurable Intelligent Surfaces
Authors:
Tiebin Mi,
Jianan Zhang,
Ru**g Xiong,
Zhengyu Wang,
Robert Caiming Qiu
Abstract:
Physically accurate and mathematically tractable models are presented to characterize scattering and reflection properties of reconfigurable intelligent surfaces (RISs). We take continuous and discrete strategies to model a single patch and patch array and their interactions with multiple incident electromagnetic (EM) waves. The proposed models consider the effect of the incident and scattered ang…
▽ More
Physically accurate and mathematically tractable models are presented to characterize scattering and reflection properties of reconfigurable intelligent surfaces (RISs). We take continuous and discrete strategies to model a single patch and patch array and their interactions with multiple incident electromagnetic (EM) waves. The proposed models consider the effect of the incident and scattered angles, polarization features, and the topology and geometry of RISs. Particularly, a simple system of linear equations can describe the multiple-input multiple-output (MIMO) behaviors of RISs under reasonable assumptions. It can serve as a fundamental model for analyzing and optimizing the performance of RIS-aided systems in the far-field regime. The proposed models are employed to identify the advantages and limitations of three typical configurations. One important finding is that complicated beam resha** functionality can not be endowed by popular phase compensation configurations. A possible solution is the simultaneous configurations of collecting area and phase shifting. Numerical simulations verify the effectiveness of the proposed configuration schemes.
△ Less
Submitted 29 August, 2022; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Preliminary Exploration on Digital Twin for Power Systems: Challenges, Framework, and Applications
Authors:
Xing He,
Qian Ai,
Robert C. Qiu,
Dongxia Zhang
Abstract:
Digital twin (DT) is one of the most promising enabling technologies for realizing smart grids. Characterized by seamless and active---data-driven, real-time, and closed-loop---integration between digital and physical spaces, a DT is much more than a blueprint, simulation tool, or cyber-physical system (CPS). Numerous state-of-the-art technologies such as internet of things (IoT), 5G, big data, an…
▽ More
Digital twin (DT) is one of the most promising enabling technologies for realizing smart grids. Characterized by seamless and active---data-driven, real-time, and closed-loop---integration between digital and physical spaces, a DT is much more than a blueprint, simulation tool, or cyber-physical system (CPS). Numerous state-of-the-art technologies such as internet of things (IoT), 5G, big data, and artificial intelligence (AI) serve as a basis for DT. DT for power systems aims at situation awareness and virtual test to assist the decision-making on power grid operation and management under normal or urgent conditions. This paper, from both science paradigms and engineering practice, outlines the backgrounds, challenges, framework, tools, and possible directions of DT as a preliminary exploration. To our best knowledge, it is also the first exploration on DT in the context of power systems. Starting from the fundamental and most frequently used power flow (PF) analysis, some typical application scenarios are presented. Our work is expected to contribute some novel discoveries, as well as some high-dimensional analytics, to the engineering community. Besides, the connection of DT with big data analytics and AI may has deep impact on data science.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
LEMO: Learn to Equalize for MIMO-OFDM Systems with Low-Resolution ADCs
Authors:
Lei Chu,
Ling Pei,
Husheng Li,
Robert Caiming Qiu
Abstract:
This paper develops a new deep neural network optimized equalization framework for massive multiple input multiple output orthogonal frequency division multiplexing (MIMOOFDM) systems that employ low-resolution analog-to-digital converters (ADCs) at the base station (BS). The use of lowresolution ADCs could largely reduce hardware complexity and circuit power consumption, however, it makes the cha…
▽ More
This paper develops a new deep neural network optimized equalization framework for massive multiple input multiple output orthogonal frequency division multiplexing (MIMOOFDM) systems that employ low-resolution analog-to-digital converters (ADCs) at the base station (BS). The use of lowresolution ADCs could largely reduce hardware complexity and circuit power consumption, however, it makes the channel station information almost blind to the BS, hence causing difficulty in solving the equalization problem. In this paper, we consider a supervised learning architecture, where the goal is to learn a representative function that can predict the targets (constellation points) from the inputs (outputs of the low-resolution ADCs) based on the labeled training data (pilot signals). Especially, our main contributions are two-fold: 1) First, we design a new activation function, whose outputs are close to the constellation points when the parameters are finally optimized, to help us fully exploit the stochastic gradient descent method for the discrete optimization problem. 2) Second, an unsupervised loss is designed and then added to the optimization objective, aiming to enhance the representation ability (so-called generalization). Lastly, various experimental results confirm the superiority of the proposed equalizer over some existing ones, particularly when the statistics of the channel state information are unclear.
△ Less
Submitted 25 May, 2020; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Robust Precoding Design for Coarsely Quantized MU-MIMO Under Channel Uncertainties
Authors:
Lei Chu,
Fei Wen,
Robert Caiming Qiu
Abstract:
Recently, multi-user multiple input multiple output (MU-MIMO) systems with low-resolution digital-to-analog converters (DACs) has received considerable attention, owing to the capability of dramatically reducing the hardware cost. Besides, it has been shown that the use of low-resolution DACs enable great reduction in power consumption while maintain the performance loss within acceptable margin,…
▽ More
Recently, multi-user multiple input multiple output (MU-MIMO) systems with low-resolution digital-to-analog converters (DACs) has received considerable attention, owing to the capability of dramatically reducing the hardware cost. Besides, it has been shown that the use of low-resolution DACs enable great reduction in power consumption while maintain the performance loss within acceptable margin, under the assumption of perfect knowledge of channel state information (CSI). In this paper, we investigate the precoding problem for the coarsely quantized MU-MIMO system without such an assumption. The channel uncertainties are modeled to be a random matrix with finite second-order statistics. By leveraging a favorable relation between the multi-bit DACs outputs and the single-bit ones, we first reformulate the original complex precoding problem into a nonconvex binary optimization problem. Then, using the S-procedure lemma, the nonconvex problem is recast into a tractable formulation with convex constraints and finally solved by the semidefinite relaxation (SDR) method. Compared with existing representative methods, the proposed precoder is robust to various channel uncertainties and is able to support a MUMIMO system with higher-order modulations, e.g., 16QAM.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Improving Power System State Estimation Based on Matrix-Level Cleaning
Authors:
Haosen Yang,
Robert C. Qiu,
Lei Chu,
Tiebin Mi,
Xin Shi,
Chaoyuan Mary Liu
Abstract:
Power system state estimation is heavily subjected to measurement error, which comes from the noise of measuring instruments, communication noise, and some unclear randomness. Traditional weighted least square (WLS), as the most universal state estimation method, attempts to minimize the residual between measurements and the estimation of measured variables, but it is unable to handle the measurem…
▽ More
Power system state estimation is heavily subjected to measurement error, which comes from the noise of measuring instruments, communication noise, and some unclear randomness. Traditional weighted least square (WLS), as the most universal state estimation method, attempts to minimize the residual between measurements and the estimation of measured variables, but it is unable to handle the measurement error. To solve this problem, based on random matrix theory, this paper proposes a data-driven approach to clean measurement error in matrix-level. Our method significantly reduces the negative effect of measurement error, and conducts a two-stage state estimation scheme combined with WLS. In this method, a Hermitian matrix is constructed to establish an invertible relationship between the eigenvalues of measurements and their covariance matrix. Random matrix tools, combined with an optimization scheme, are used to clean measurement error by shrinking the eigenvalues of the covariance matrix. With great robustness and generality, our approach is particularly suitable for large interconnected power grids. Our method has been numerically evaluated using different testing systems, multiple models of measured noise and matrix size ratios.
△ Less
Submitted 6 April, 2020; v1 submitted 13 April, 2019;
originally announced April 2019.
-
Unsupervised Feature Learning for Online Voltage Stability Evaluation and Monitoring Based on Variational Autoencoder
Authors:
Haosen Yang,
Robert C. Qiu,
Xin Shi,
Xing He
Abstract:
With the increase of uncertain elements in power systems and extensive deployment of online monitoring devices, it is necessary to search a more real-time and robust voltage stability assessment method. This study, using PMU monitoring data, explores a novel data-driven approach for long-term voltage stability assessment based on variational autoencoder (VAE). Our method is capable of extracting t…
▽ More
With the increase of uncertain elements in power systems and extensive deployment of online monitoring devices, it is necessary to search a more real-time and robust voltage stability assessment method. This study, using PMU monitoring data, explores a novel data-driven approach for long-term voltage stability assessment based on variational autoencoder (VAE). Our method is capable of extracting the most representative features by an unsupervised data mining method in a probabilistic learning way. Different from most of familiar feature extraction methods, it regularizes latent features in an expected stochastic distribution. Furthermore, a statistical indicator by sampling latent features after variance reduction is proposed to assess long-term voltage stability. Our approach is tested in various simulated power systems with different load increment models. Other cases show the accuracy and speed of our approach for estimating voltage collapse point. These testing cases successfully demonstrate the accuracy and effectiveness of our approach.
△ Less
Submitted 31 March, 2020; v1 submitted 17 August, 2018;
originally announced August 2018.
-
A Survey on Nonconvex Regularization Based Sparse and Low-Rank Recovery in Signal Processing, Statistics, and Machine Learning
Authors:
Fei Wen,
Lei Chu,
Peilin Liu,
Robert C. Qiu
Abstract:
In the past decade, sparse and low-rank recovery have drawn much attention in many areas such as signal/image processing, statistics, bioinformatics and machine learning. To achieve sparsity and/or low-rankness inducing, the $\ell_1$ norm and nuclear norm are of the most popular regularization penalties due to their convexity. While the $\ell_1$ and nuclear norm are convenient as the related conve…
▽ More
In the past decade, sparse and low-rank recovery have drawn much attention in many areas such as signal/image processing, statistics, bioinformatics and machine learning. To achieve sparsity and/or low-rankness inducing, the $\ell_1$ norm and nuclear norm are of the most popular regularization penalties due to their convexity. While the $\ell_1$ and nuclear norm are convenient as the related convex optimization problems are usually tractable, it has been shown in many applications that a nonconvex penalty can yield significantly better performance. In recent, nonconvex regularization based sparse and low-rank recovery is of considerable interest and it in fact is a main driver of the recent progress in nonconvex and nonsmooth optimization. This paper gives an overview of this topic in various fields in signal processing, statistics and machine learning, including compressive sensing (CS), sparse regression and variable selection, sparse signals separation, sparse principal component analysis (PCA), large covariance and inverse covariance matrices estimation, matrix completion, and robust PCA. We present recent developments of nonconvex regularization based sparse and low-rank recovery in these fields, addressing the issues of penalty selection, applications and the convergence of nonconvex algorithms. Code is available at https://github.com/FWen/ncreg.git.
△ Less
Submitted 6 June, 2019; v1 submitted 16 August, 2018;
originally announced August 2018.
-
Shifting Maximum Eigenvalue Detection in Low SNR Environment
Authors:
Lin Zheng,
Robert C. Qiu,
Qing Feng,
Xuebin Li
Abstract:
Maximum eigenvalue detection (MED) is an important application of random matrix theory in spectrum sensing and signal detection. However, in small signal-to-noise ratio environment, the maximum eigenvalue of the representative signal is at the edge of Marchenko-Pastur (M-P) law bulk and meets the Tracy-Widom distribution. Since the distribution of Tracy-Widom has no closed-form expression, it brin…
▽ More
Maximum eigenvalue detection (MED) is an important application of random matrix theory in spectrum sensing and signal detection. However, in small signal-to-noise ratio environment, the maximum eigenvalue of the representative signal is at the edge of Marchenko-Pastur (M-P) law bulk and meets the Tracy-Widom distribution. Since the distribution of Tracy-Widom has no closed-form expression, it brings great difficulty in processing. In this paper, we propose a shifting maximum eigenvalue (SMED) algorithm, which shifts the maximum eigenvalue out of the M-P law bulk by combining an auxiliary signal associated with the signal to be detected. According to the random matrix theory, the shifted maximum eigenvalue is consistent with Gaussian distribution. The proposed SMED not only simplifies the detection algorithm, but also greatly improve the detection performance. In this paper, the performance of SMED, MED and trace (FMD) algorithm is analyzed and the theoretical performance comparisons are obtained. The algorithm and theoretical results are verified by the simulations in different signal environments.
△ Less
Submitted 27 March, 2018; v1 submitted 28 February, 2018;
originally announced February 2018.
-
A New Approach of Exploiting Self-Adjoint Matrix Polynomials of Large Random Matrices for Anomaly Detection and Fault Location
Authors:
Zenan Ling,
Robert C. Qiu,
Xing He,
Lei Chu
Abstract:
Synchronized measurements of a large power grid enable an unprecedented opportunity to study the spatialtemporal correlations. Statistical analytics for those massive datasets start with high-dimensional data matrices. Uncertainty is ubiquitous in a future's power grid. These data matrices are recognized as random matrices. This new point of view is fundamental in our theoretical analysis since tr…
▽ More
Synchronized measurements of a large power grid enable an unprecedented opportunity to study the spatialtemporal correlations. Statistical analytics for those massive datasets start with high-dimensional data matrices. Uncertainty is ubiquitous in a future's power grid. These data matrices are recognized as random matrices. This new point of view is fundamental in our theoretical analysis since true covariance matrices cannot be estimated accurately in a high-dimensional regime. As an alternative, we consider large-dimensional sample covariance matrices in the asymptotic regime to replace the true covariance matrices. The self-adjoint polynomials of large-dimensional random matrices are studied as statistics for big data analytics. The calculation of the asymptotic spectrum distribution (ASD) for such a matrix polynomial is understandably challenging. This task is made possible by a recent breakthrough in free probability, an active research branch in random matrix theory. This is the very reason why the work of this paper is inspired initially. The new approach is interesting in many aspects. The mathematical reason may be most critical. The real-world problems can be solved using this approach, however.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Improvement of Resting-state EEG Analysis Process with Spectrum Weight-Voting based on LES
Authors:
Yumeng Ye,
Haichun Liu,
TianHong Zhang,
Changchun Pan,
Genke Yang,
JiJun Wang,
Robert C. Qiu
Abstract:
EEG is a non-invasive technique for recording brain bioelectric activity, which has potential applications in various fields such as human-computer interaction and neuroscience. However, there are many difficulties in analyzing EEG data, including its complex composition, low amplitude as well as low signal-to-noise ratio. Some of the existing methods of analysis are based on feature extraction an…
▽ More
EEG is a non-invasive technique for recording brain bioelectric activity, which has potential applications in various fields such as human-computer interaction and neuroscience. However, there are many difficulties in analyzing EEG data, including its complex composition, low amplitude as well as low signal-to-noise ratio. Some of the existing methods of analysis are based on feature extraction and machine learning to differentiate the phase of schizophrenia that samples belong to. However, medical research requires the use of machine learning not only to give more accurate classification results, but also to give the results that can be applied to pathological studies. The main purpose of this study is to obtain the weight values as the representation of influence of each frequency band on the classification of schizophrenia phases on the basis of a more effective classification method using the LES feature extraction, and then the weight values are processed and applied to improve the accuracy of machine learning classification. We propose a method called weight-voting to obtain the weights of sub-bands features by using results of classification for voting to fit the actual categories of EEG data, and using weights for reclassification. Through this method, we can first obtain the influence of each band in distinguishing three schizophrenia phases, and analyze the effect of band features on the risk of schizophrenia contributing to the study of psychopathology. Our results show that there is a high correlation between the change of weight of low gamma band and the difference between HC, CHR and FES. If the features revised according to weights are used for reclassification, the accuracy of result will be improved compared with the original classifier, which confirms the role of the band weight distribution.
△ Less
Submitted 17 January, 2018; v1 submitted 20 December, 2017;
originally announced December 2017.
-
A Data Driven Approach for Resting-state EEG signal Classification of Schizophrenia with Control Participants using Random Matrix Theory
Authors:
Haichun Liu,
TianHong Zhang,
Yumeng Ye,
Changchun Pan,
Genke Yang,
JiJun Wang,
Robert C. Qiu
Abstract:
Resting state electroencephalogram (EEG) abnormalities in clinically high-risk individuals (CHR), clinically stable first-episode patients with schizophrenia (FES), healthy controls (HC) suggest alterations in neural oscillatory activity. However, few studies directly compare these anomalies among each types. Therefore, this study investigated whether these electrophysiological characteristics dif…
▽ More
Resting state electroencephalogram (EEG) abnormalities in clinically high-risk individuals (CHR), clinically stable first-episode patients with schizophrenia (FES), healthy controls (HC) suggest alterations in neural oscillatory activity. However, few studies directly compare these anomalies among each types. Therefore, this study investigated whether these electrophysiological characteristics differentiate clinical populations from one another, and from non-psychiatric controls. To address this question, resting EEG power and coherence were assessed in 40 clinically high-risk individuals (CHR), 40 first-episode patients with schizophrenia (FES), and 40 healthy controls (HC). These findings suggest that resting EEG can be a sensitive measure for differentiating between clinical disorders.This paper proposes a novel data-driven supervised learning method to obtain identification of the patients mental status in schizophrenia research. According to Marchenko-Pastur Law, the distribution of the eigenvalues of EEG data is divided into signal subspace and noise subspace. A test statistic named LES that embodies the characteristics of all eigenvalues is adopted. different classifier and different feature(LES test function) are selected for experiments, we have shown that using von Neumann Entropy as LES test function combine with SVM classifier could obtain the best average classification accuracy during three classification among HC, FES and CHR of Schizophrenia group with EEG signal. It is worth noting that the result of LES feature extraction with the highest classification accuracy is around 90% in two classification(HC compare with FES) and around 70% in three classification. Where the classification accuracy higher than 70% could be used to assist clinical diagnosis.
△ Less
Submitted 17 January, 2018; v1 submitted 13 December, 2017;
originally announced December 2017.
-
MIMO UWB Radar System with Compressive Sensing
Authors:
Xia Li,
Zhen Hu,
Robert C. Qiu
Abstract:
A multiple input multiple output ultra-wideband cognitive radar based on compressive sensing is presented in this letter. For traditional UWB radar, high sampling rate analog to digital converter at the receiver is required to meet Shannon theorem, which increases hardware complexity. In order to bypass the bottleneck of ADC or further increase the radar bandwidth using the latest wideband ADC, we…
▽ More
A multiple input multiple output ultra-wideband cognitive radar based on compressive sensing is presented in this letter. For traditional UWB radar, high sampling rate analog to digital converter at the receiver is required to meet Shannon theorem, which increases hardware complexity. In order to bypass the bottleneck of ADC or further increase the radar bandwidth using the latest wideband ADC, we propose to exploit CS for signal reconstruction at the receiver of UWB radar for the sparse targets in the surveillance area. Besides, the function of narrowband interference cancellation is integrated into the proposed MIMO UWB radar. The field demonstration proves the feasibility and reliability of the proposed algorithm.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.