-
Ultra Inertial Poser: Scalable Motion Capture and Tracking from Sparse Inertial Sensors and Ultra-Wideband Ranging
Authors:
Rayan Armani,
Changlin Qian,
Jiaxi Jiang,
Christian Holz
Abstract:
While camera-based capture systems remain the gold standard for recording human motion, learning-based tracking systems based on sparse wearable sensors are gaining popularity. Most commonly, they use inertial sensors, whose propensity for drift and jitter have so far limited tracking accuracy. In this paper, we propose Ultra Inertial Poser, a novel 3D full body pose estimation method that constra…
▽ More
While camera-based capture systems remain the gold standard for recording human motion, learning-based tracking systems based on sparse wearable sensors are gaining popularity. Most commonly, they use inertial sensors, whose propensity for drift and jitter have so far limited tracking accuracy. In this paper, we propose Ultra Inertial Poser, a novel 3D full body pose estimation method that constrains drift and jitter in inertial tracking via inter-sensor distances. We estimate these distances across sparse sensor setups using a lightweight embedded tracker that augments inexpensive off-the-shelf 6D inertial measurement units with ultra-wideband radio-based ranging$-$dynamically and without the need for stationary reference anchors. Our method then fuses these inter-sensor distances with the 3D states estimated from each sensor Our graph-based machine learning model processes the 3D states and distances to estimate a person's 3D full body pose and translation. To train our model, we synthesize inertial measurements and distance estimates from the motion capture database AMASS. For evaluation, we contribute a novel motion dataset of 10 participants who performed 25 motion types, captured by 6 wearable IMU+UWB trackers and an optical motion capture system, totaling 200 minutes of synchronized sensor data (UIP-DB). Our extensive experiments show state-of-the-art performance for our method over PIP and TIP, reducing position error from $13.62$ to $10.65cm$ ($22\%$ better) and lowering jitter from $1.56$ to $0.055km/s^3$ (a reduction of $97\%$).
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Minimum Snap Trajectory Generation and Control for an Under-actuated Flap** Wing Aerial Vehicle
Authors:
Chen Qian,
Rui Chen,
Peiyao Shen,
Yongchun Fang,
Jifu Yan,
Tiefeng Li
Abstract:
Minimum Snap Trajectory Generation and Control for an Under-actuated Flap** Wing Aerial VehicleThis paper presents both the trajectory generation and tracking control strategies for an underactuated flap** wing aerial vehicle (FWAV). First, the FWAV dynamics is analyzed in a practical perspective. Then, based on these analyses, we demonstrate the differential flatness of the FWAV system, and d…
▽ More
Minimum Snap Trajectory Generation and Control for an Under-actuated Flap** Wing Aerial VehicleThis paper presents both the trajectory generation and tracking control strategies for an underactuated flap** wing aerial vehicle (FWAV). First, the FWAV dynamics is analyzed in a practical perspective. Then, based on these analyses, we demonstrate the differential flatness of the FWAV system, and develop a general-purpose trajectory generation strategy. Subsequently, the trajectory tracking controller is developed with the help of robust control and switch control techniques. After that, the overall system asymptotic stability is guaranteed by Lyapunov stability analysis. To make the controller applicable in real flight, we also provide several instructions. Finally, a series of experiment results manifest the successful implementation of the proposed trajectory generation strategy and tracking control strategy. This work firstly achieves the closed-loop integration of trajectory generation and control for real 3-dimensional flight of an underactuated FWAV to a practical level.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Bloch Equation Enables Physics-informed Neural Network in Parametric Magnetic Resonance Imaging
Authors:
Qingrui Cai,
Liuhong Zhu,
Jianjun Zhou,
Chen Qian,
Di Guo,
Xiaobo Qu
Abstract:
Magnetic resonance imaging (MRI) is an important non-invasive imaging method in clinical diagnosis. Beyond the common image structures, parametric imaging can provide the intrinsic tissue property thus could be used in quantitative evaluation. The emerging deep learning approach provides fast and accurate parameter estimation but still encounters the lack of network interpretation and enough train…
▽ More
Magnetic resonance imaging (MRI) is an important non-invasive imaging method in clinical diagnosis. Beyond the common image structures, parametric imaging can provide the intrinsic tissue property thus could be used in quantitative evaluation. The emerging deep learning approach provides fast and accurate parameter estimation but still encounters the lack of network interpretation and enough training data. Even with a large amount of training data, the mismatch between the training and target data may introduce errors. Here, we propose one way that solely relies on the target scanned data and does not need a pre-defined training database. We provide a proof-of-concept that embeds the physical rule of MRI, the Bloch equation, into the loss of physics-informed neural network (PINN). PINN enables learning the Bloch equation, estimating the T2 parameter, and generating a series of physically synthetic data. Experimental results are conducted on phantom and cardiac imaging to demonstrate its potential in quantitative MRI.
△ Less
Submitted 20 September, 2023;
originally announced September 2023.
-
Comparison of Dynamic Tomato Growth Models for Optimal Control in Greenhouses
Authors:
Michael Fink,
Annalena Daniels,
Cheng Qian,
Víctor Martínez Velásquez,
Sahil Salotra,
Dirk Wollherr
Abstract:
As global demand for efficiency in agriculture rises, there is a growing interest in high-precision farming practices. Particularly greenhouses play a critical role in ensuring a year-round supply of fresh produce. In order to maximize efficiency and productivity while minimizing resource use, mathematical techniques such as optimal control have been employed. However, selecting appropriate models…
▽ More
As global demand for efficiency in agriculture rises, there is a growing interest in high-precision farming practices. Particularly greenhouses play a critical role in ensuring a year-round supply of fresh produce. In order to maximize efficiency and productivity while minimizing resource use, mathematical techniques such as optimal control have been employed. However, selecting appropriate models for optimal control requires domain expertise. This study aims to compare three established tomato models for their suitability in an optimal control framework. Results show that all three models have similar yield predictions and accuracy, but only two models are currently applicable for optimal control due to implementation limitations. The two remaining models each have advantages in terms of economic yield and computation times, but the differences in optimal control strategies suggest that they require more accurate parameter identification and calibration tailored to greenhouses.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
One-Bit Covariance Reconstruction with Non-zero Thresholds: Algorithm and Performance Analysis
Authors:
Yu-Hang Xiao,
Lei Huang,
David Ramírez,
Cheng Qian,
Hing Cheung So
Abstract:
Covariance matrix reconstruction is a topic of great significance in the field of one-bit signal processing and has numerous practical applications. Despite its importance, the conventional arcsine law with zero threshold is incapable of recovering the diagonal elements of the covariance matrix. To address this limitation, recent studies have proposed the use of non-zero clip** thresholds. Howev…
▽ More
Covariance matrix reconstruction is a topic of great significance in the field of one-bit signal processing and has numerous practical applications. Despite its importance, the conventional arcsine law with zero threshold is incapable of recovering the diagonal elements of the covariance matrix. To address this limitation, recent studies have proposed the use of non-zero clip** thresholds. However, the relationship between the estimation error and the sampling threshold is not yet known. In this paper, we undertake an analysis of the mean squared error by computing the Fisher information matrix for a given threshold. Our results reveal that the optimal threshold can vary considerably, depending on the variances and correlation coefficients. As a result, it is inappropriate to use a constant threshold to encompass parameters that vary widely. To mitigate this issue, we present a recovery scheme that incorporates time-varying thresholds. Our approach differs from existing methods in that it utilizes the exact values of the threshold, rather than its statistical properties, to enhance the estimation performance. Our simulations, including the direction-of-arrival estimation problem, demonstrate the efficacy of the developed scheme, especially in complex scenarios where the covariance elements are widely separated.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
CloudBrain-ReconAI: An Online Platform for MRI Reconstruction and Image Quality Evaluation
Authors:
Yirong Zhou,
Chen Qian,
Jiayu Li,
Zi Wang,
Yu Hu,
Biao Qu,
Liuhong Zhu,
Jianjun Zhou,
Taishan Kang,
Jianzhong Lin,
Qing Hong,
Jiyang Dong,
Di Guo,
Xiaobo Qu
Abstract:
Efficient collaboration between engineers and radiologists is important for image reconstruction algorithm development and image quality evaluation in magnetic resonance imaging (MRI). Here, we develop CloudBrain-ReconAI, an online cloud computing platform, for algorithm deployment, fast and blind reader study. This platform supports online image reconstruction using state-of-the-art artificial in…
▽ More
Efficient collaboration between engineers and radiologists is important for image reconstruction algorithm development and image quality evaluation in magnetic resonance imaging (MRI). Here, we develop CloudBrain-ReconAI, an online cloud computing platform, for algorithm deployment, fast and blind reader study. This platform supports online image reconstruction using state-of-the-art artificial intelligence and compressed sensing algorithms with applications to fast imaging and high-resolution diffusion imaging. Through visiting the website, radiologists can easily score and mark the images. Then, automatic statistical analysis will be provided. CloudBrain-ReconAI is now open accessed at https://csrc.xmu.edu.cn/CloudBrain.html and will be continually improved to serve the MRI research community.
△ Less
Submitted 4 December, 2022;
originally announced December 2022.
-
Controlling Commercial Cooling Systems Using Reinforcement Learning
Authors:
Jerry Luo,
Cosmin Paduraru,
Octavian Voicu,
Yuri Chervonyi,
Scott Munns,
Jerry Li,
Crystal Qian,
Praneet Dutta,
Jared Quincy Davis,
Ningjia Wu,
Xingwei Yang,
Chu-Ming Chang,
Ted Li,
Rob Rose,
Mingyan Fan,
Hootan Nakhost,
Tinglin Liu,
Brian Kirkman,
Frank Altamura,
Lee Cline,
Patrick Tonker,
Joel Gouker,
Dave Uden,
Warren Buddy Bryan,
Jason Law
, et al. (11 additional authors not shown)
Abstract:
This paper is a technical overview of DeepMind and Google's recent work on reinforcement learning for controlling commercial cooling systems. Building on expertise that began with cooling Google's data centers more efficiently, we recently conducted live experiments on two real-world facilities in partnership with Trane Technologies, a building management system provider. These live experiments ha…
▽ More
This paper is a technical overview of DeepMind and Google's recent work on reinforcement learning for controlling commercial cooling systems. Building on expertise that began with cooling Google's data centers more efficiently, we recently conducted live experiments on two real-world facilities in partnership with Trane Technologies, a building management system provider. These live experiments had a variety of challenges in areas such as evaluation, learning from offline data, and constraint satisfaction. Our paper describes these challenges in the hope that awareness of them will benefit future applied RL work. We also describe the way we adapted our RL system to deal with these challenges, resulting in energy savings of approximately 9% and 13% respectively at the two live experiment sites.
△ Less
Submitted 14 December, 2022; v1 submitted 11 November, 2022;
originally announced November 2022.
-
A Faithful Deep Sensitivity Estimation for Accelerated Magnetic Resonance Imaging
Authors:
Zi Wang,
Haoming Fang,
Chen Qian,
Boxuan Shi,
Lijun Bao,
Liuhong Zhu,
Jianjun Zhou,
Wen** Wei,
Jianzhong Lin,
Di Guo,
Xiaobo Qu
Abstract:
Magnetic resonance imaging (MRI) is an essential diagnostic tool that suffers from prolonged scan time. To alleviate this limitation, advanced fast MRI technology attracts extensive research interests. Recent deep learning has shown its great potential in improving image quality and reconstruction speed. Faithful coil sensitivity estimation is vital for MRI reconstruction. However, most deep learn…
▽ More
Magnetic resonance imaging (MRI) is an essential diagnostic tool that suffers from prolonged scan time. To alleviate this limitation, advanced fast MRI technology attracts extensive research interests. Recent deep learning has shown its great potential in improving image quality and reconstruction speed. Faithful coil sensitivity estimation is vital for MRI reconstruction. However, most deep learning methods still rely on pre-estimated sensitivity maps and ignore their inaccuracy, resulting in the significant quality degradation of reconstructed images. In this work, we propose a Joint Deep Sensitivity estimation and Image reconstruction network, called JDSI. During the image artifacts removal, it gradually provides more faithful sensitivity maps with high-frequency information, leading to improved image reconstructions. To understand the behavior of the network, the mutual promotion of sensitivity estimation and image reconstruction is revealed through the visualization of network intermediate results. Results on in vivo datasets and radiologist reader study demonstrate that, for both calibration-based and calibrationless reconstruction, the proposed JDSI achieves the state-of-the-art performance visually and quantitatively, especially when the acceleration factor is high. Additionally, JDSI owns nice robustness to patients and autocalibration signals.
△ Less
Submitted 24 December, 2023; v1 submitted 23 October, 2022;
originally announced October 2022.
-
Physics-informed Deep Diffusion MRI Reconstruction with Synthetic Data: Break Training Data Bottleneck in Artificial Intelligence
Authors:
Chen Qian,
Yuncheng Gao,
Mingyang Han,
Zi Wang,
Dan Ruan,
Yu Shen,
Ya** Wu,
Yirong Zhou,
Chengyan Wang,
Boyu Jiang,
Ran Tao,
Zhigang Wu,
Jiazheng Wang,
Liuhong Zhu,
Yi Guo,
Taishan Kang,
Jianzhong Lin,
Tao Gong,
Chen Yang,
Guoqiang Fei,
Mei** Lin,
Di Guo,
Jianjun Zhou,
Meiyun Wang,
Xiaobo Qu
Abstract:
Diffusion magnetic resonance imaging (MRI) is the only imaging modality for non-invasive movement detection of in vivo water molecules, with significant clinical and research applications. Diffusion MRI (DWI) acquired by multi-shot techniques can achieve higher resolution, better signal-to-noise ratio, and lower geometric distortion than single-shot, but suffers from inter-shot motion-induced arti…
▽ More
Diffusion magnetic resonance imaging (MRI) is the only imaging modality for non-invasive movement detection of in vivo water molecules, with significant clinical and research applications. Diffusion MRI (DWI) acquired by multi-shot techniques can achieve higher resolution, better signal-to-noise ratio, and lower geometric distortion than single-shot, but suffers from inter-shot motion-induced artifacts. These artifacts cannot be removed prospectively, leading to the absence of artifact-free training labels. Thus, the potential of deep learning in multi-shot DWI reconstruction remains largely untapped. To break the training data bottleneck, here, we propose a Physics-Informed Deep DWI reconstruction method (PIDD) to synthesize high-quality paired training data by leveraging the physical diffusion model (magnitude synthesis) and inter-shot motion-induced phase model (motion phase synthesis). The network is trained only once with 100,000 synthetic samples, achieving encouraging results on multiple realistic in vivo data reconstructions. Advantages over conventional methods include: (a) Better motion artifact suppression and reconstruction stability; (b) Outstanding generalization to multi-scenario reconstructions, including multi-resolution, multi-b-value, multi-undersampling, multi-vendor, and multi-center; (c) Excellent clinical adaptability to patients with verifications by seven experienced doctors (p<0.001). In conclusion, PIDD presents a novel deep learning framework by exploiting the power of MRI physics, providing a cost-effective and explainable way to break the data bottleneck in deep learning medical imaging.
△ Less
Submitted 5 February, 2024; v1 submitted 20 October, 2022;
originally announced October 2022.
-
Noise-Adaptive Intelligent Programmable Meta-Imager
Authors:
Chenqi Qian,
Philipp del Hougne
Abstract:
We present an intelligent programmable computational meta-imager that tailors its sequence of coherent scene illuminations not only to a specific information-extraction task (e.g., object recognition) but also adapts to different types and levels of noise. We systematically study how the learned illumination patterns depend on the noise, and we discover that trends in intensity and overlap of the…
▽ More
We present an intelligent programmable computational meta-imager that tailors its sequence of coherent scene illuminations not only to a specific information-extraction task (e.g., object recognition) but also adapts to different types and levels of noise. We systematically study how the learned illumination patterns depend on the noise, and we discover that trends in intensity and overlap of the learned illumination patterns can be understood intuitively. We conduct our analysis based on an analytical coupled-dipole forward model of a microwave dynamic metasurface antenna (DMA); we formulate a differentiable end-to-end information-flow pipeline comprising the programmable physical measurement process including noise as well as the subsequent digital processing layers. This pipeline allows us to jointly inverse-design the programmable physical weights (DMA configurations that determine the coherent scene illuminations) and the trainable digital weights. Our noise-adaptive intelligent meta-imager outperforms the conventional use of pseudo-random illumination patterns most clearly under conditions that make the extraction of sufficient task-relevant information challenging: latency constraints (limiting the number of allowed measurements) and strong noise. Programmable microwave meta-imagers in indoor surveillance and earth observation will be confronted with these conditions.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
A Paired Phase and Magnitude Reconstruction for Advanced Diffusion-Weighted Imaging
Authors:
Chen Qian,
Zi Wang,
Xinlin Zhang,
Boxuan Shi,
Boyu Jiang,
Ran Tao,
**g Li,
Yuwei Ge,
Taishan Kang,
Jianzhong Lin,
Di Guo,
Xiaobo Qu
Abstract:
Objective: Multi-shot interleaved echo planer imaging can obtain diffusion-weighted images (DWI) with high spatial resolution and low distortion, but suffers from ghost artifacts introduced by phase variations between shots. In this work, we aim at solving the challenging reconstructions under inter-shot motions between shots and a low signal-to-noise ratio. Methods: An explicit phase model with p…
▽ More
Objective: Multi-shot interleaved echo planer imaging can obtain diffusion-weighted images (DWI) with high spatial resolution and low distortion, but suffers from ghost artifacts introduced by phase variations between shots. In this work, we aim at solving the challenging reconstructions under inter-shot motions between shots and a low signal-to-noise ratio. Methods: An explicit phase model with paired phase and magnitude priors is proposed to regularize the reconstruction (PAIR). The former prior is derived from the smoothness of the shot phase and enforced with low-rankness in the k-space domain. The latter explores similar edges among multi-b-value and multi-direction DWI with weighted total variation in the image domain. Results: Extensive simulation and in vivo results show that PAIR can remove ghost artifacts very well under a high number of shots (8 shots) and significantly suppress the noise under the ultra-high b-value (4000 s/mm2). Conclusion: The explicit phase model PAIR with complementary priors has a good performance on challenging reconstructions under inter-shot motions between shots and a low signal-to-noise ratio. Significance: PAIR has great potential in advanced clinical DWI applications and brain function research.
△ Less
Submitted 8 December, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Bailando: 3D Dance Generation by Actor-Critic GPT with Choreographic Memory
Authors:
Li Siyao,
Weijiang Yu,
Tianpei Gu,
Chunze Lin,
Quan Wang,
Chen Qian,
Chen Change Loy,
Ziwei Liu
Abstract:
Driving 3D characters to dance following a piece of music is highly challenging due to the spatial constraints applied to poses by choreography norms. In addition, the generated dance sequence also needs to maintain temporal coherency with different music genres. To tackle these challenges, we propose a novel music-to-dance framework, Bailando, with two powerful components: 1) a choreographic memo…
▽ More
Driving 3D characters to dance following a piece of music is highly challenging due to the spatial constraints applied to poses by choreography norms. In addition, the generated dance sequence also needs to maintain temporal coherency with different music genres. To tackle these challenges, we propose a novel music-to-dance framework, Bailando, with two powerful components: 1) a choreographic memory that learns to summarize meaningful dancing units from 3D pose sequence to a quantized codebook, 2) an actor-critic Generative Pre-trained Transformer (GPT) that composes these units to a fluent dance coherent to the music. With the learned choreographic memory, dance generation is realized on the quantized units that meet high choreography standards, such that the generated dancing sequences are confined within the spatial constraints. To achieve synchronized alignment between diverse motion tempos and music beats, we introduce an actor-critic-based reinforcement learning scheme to the GPT with a newly-designed beat-align reward function. Extensive experiments on the standard benchmark demonstrate that our proposed framework achieves state-of-the-art performance both qualitatively and quantitatively. Notably, the learned choreographic memory is shown to discover human-interpretable dancing-style poses in an unsupervised manner.
△ Less
Submitted 24 March, 2022; v1 submitted 24 March, 2022;
originally announced March 2022.
-
One-dimensional Deep Low-rank and Sparse Network for Accelerated MRI
Authors:
Zi Wang,
Chen Qian,
Di Guo,
Hongwei Sun,
Rushuai Li,
Bo Zhao,
Xiaobo Qu
Abstract:
Deep learning has shown astonishing performance in accelerated magnetic resonance imaging (MRI). Most state-of-the-art deep learning reconstructions adopt the powerful convolutional neural network and perform 2D convolution since many magnetic resonance images or their corresponding k-space are in 2D. In this work, we present a new approach that explores the 1D convolution, making the deep network…
▽ More
Deep learning has shown astonishing performance in accelerated magnetic resonance imaging (MRI). Most state-of-the-art deep learning reconstructions adopt the powerful convolutional neural network and perform 2D convolution since many magnetic resonance images or their corresponding k-space are in 2D. In this work, we present a new approach that explores the 1D convolution, making the deep network much easier to be trained and generalized. We further integrate the 1D convolution into the proposed deep network, named as One-dimensional Deep Low-rank and Sparse network (ODLS), which unrolls the iteration procedure of a low-rank and sparse reconstruction model. Extensive results on in vivo knee and brain datasets demonstrate that, the proposed ODLS is very suitable for the case of limited training subjects and provides improved reconstruction performance than state-of-the-art methods both visually and quantitatively. Additionally, ODLS also shows nice robustness to different undersampling scenarios and some mismatches between the training and test data. In summary, our work demonstrates that the 1D deep learning scheme is memory-efficient and robust in fast MRI.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Invariance and Contraction in Geometrically Periodic Systems with Differential Inclusions
Authors:
Chen Qian,
Yongchun Fang
Abstract:
The objective of this paper is to derive the essential invariance and contraction properties for the geometric periodic systems, which can be formulated as a category of differential inclusions, and primarily rendered in the phase coordinate, or the cycle coordinate. First, we introduce the geometric averaging method for this category of systems, and also analyze the accuracy of its averaging appr…
▽ More
The objective of this paper is to derive the essential invariance and contraction properties for the geometric periodic systems, which can be formulated as a category of differential inclusions, and primarily rendered in the phase coordinate, or the cycle coordinate. First, we introduce the geometric averaging method for this category of systems, and also analyze the accuracy of its averaging approximation. Specifically, we delve into the details of the geometrically periodic system through the tunnel of considering the convergence between the system and its geometrically averaging approximation. Under different corresponding conditions, the approximation on infinite time intervals can achieve certain accuracies, such that one can use the stability result of either the original system or the averaging system to deduce the stability of the other. After that, we employ the graphical stability to investigate the "pattern stability" with respect to the phase-based system. Finally, by virtue of the contraction analysis on the Finsler manifold, the idea of accentuating the periodic pattern incremental stability and convergence is nurtured in the phase-based differential inclusion system, and comes to its preliminary fruition in application to biomimetic mechanic robot control problem.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
XCloud-pFISTA: A Medical Intelligence Cloud for Accelerated MRI
Authors:
Yirong Zhou,
Chen Qian,
Yi Guo,
Zi Wang,
Jian Wang,
Biao Qu,
Di Guo,
Yongfu You,
Xiaobo Qu
Abstract:
Machine learning and artificial intelligence have shown remarkable performance in accelerated magnetic resonance imaging (MRI). Cloud computing technologies have great advantages in building an easily accessible platform to deploy advanced algorithms. In this work, we develop an open-access, easy-to-use and high-performance medical intelligence cloud computing platform (XCloud-pFISTA) to reconstru…
▽ More
Machine learning and artificial intelligence have shown remarkable performance in accelerated magnetic resonance imaging (MRI). Cloud computing technologies have great advantages in building an easily accessible platform to deploy advanced algorithms. In this work, we develop an open-access, easy-to-use and high-performance medical intelligence cloud computing platform (XCloud-pFISTA) to reconstruct MRI images from undersampled k-space data. Two state-of-the-art approaches of the Projected Fast Iterative Soft-Thresholding Algorithm (pFISTA) family have been successfully implemented on the cloud. This work can be considered as a good example of cloud-based medical image reconstruction and may benefit the future development of integrated reconstruction and online diagnosis system.
△ Less
Submitted 10 June, 2021; v1 submitted 18 April, 2021;
originally announced April 2021.
-
One-Bit Target Detection in Collocated MIMO Radar and Performance Degradation Analysis
Authors:
Yu-Hang Xiao,
David Ramírez,
Peter J. Schreier,
Cheng Qian,
Lei Huang
Abstract:
Target detection is an important problem in multiple-input multiple-output (MIMO) radar. Many existing target detection algorithms were proposed without taking into consideration the quantization error caused by analog-to-digital converters (ADCs). This paper addresses the problem of target detection for MIMO radar with one-bit ADCs and derives a Rao's test-based detector. The proposed method has…
▽ More
Target detection is an important problem in multiple-input multiple-output (MIMO) radar. Many existing target detection algorithms were proposed without taking into consideration the quantization error caused by analog-to-digital converters (ADCs). This paper addresses the problem of target detection for MIMO radar with one-bit ADCs and derives a Rao's test-based detector. The proposed method has several appealing features: 1) it is a closed-form detector; 2) it allows us to handle sign measurements straightforwardly; 3) there are closed-form approximations of the detector's distributions, which allow us to theoretically evaluate its performance. Moreover, the closed-form distributions allow us to study the performance degradation due to the one-bit ADCs, yielding an approximate $2$ dB loss in the low-signal-to-noise-ratio (SNR) regime compared to $\infty$-bit ADCs. Simulation results are included to showcase the advantage of the proposed detector and validate the accuracy of the theoretical results.
△ Less
Submitted 20 May, 2021; v1 submitted 19 December, 2020;
originally announced December 2020.
-
On the Compression of Translation Operator Tensors in FMM-FFT-Accelerated SIE Simulators via Tensor Decompositions
Authors:
Cheng Qian,
Abdulkadir C. Yucel
Abstract:
Tensor decomposition methodologies are proposed to reduce the memory requirement of translation operator tensors arising in the fast multipole method-fast Fourier transform (FMM-FFT)-accelerated surface integral equation (SIE) simulators. These methodologies leverage Tucker, hierarchical Tucker (H-Tucker), and tensor train (TT) decompositions to compress the FFT'ed translation operator tensors sto…
▽ More
Tensor decomposition methodologies are proposed to reduce the memory requirement of translation operator tensors arising in the fast multipole method-fast Fourier transform (FMM-FFT)-accelerated surface integral equation (SIE) simulators. These methodologies leverage Tucker, hierarchical Tucker (H-Tucker), and tensor train (TT) decompositions to compress the FFT'ed translation operator tensors stored in three-dimensional (3D) and four-dimensional (4D) array formats. Extensive numerical tests are performed to demonstrate the memory saving achieved by and computational overhead introduced by these methodologies for different simulation parameters. Numerical results show that the H-Tucker-based methodology for 4D array format yields the maximum memory saving while Tucker-based methodology for 3D array format introduces the minimum computational overhead. For many practical scenarios, all methodologies yield a significant reduction in the memory requirement of translation operator tensors while imposing negligible/acceptable computational overhead.
△ Less
Submitted 25 September, 2020;
originally announced October 2020.
-
VoxCap: FFT-Accelerated and Tucker-Enhanced Capacitance Extraction Simulator for Voxelized Structures
Authors:
Mingyu Wang,
Cheng Qian,
Jacob K. White,
Abdulkadir C. Yucel
Abstract:
VoxCap, a fast Fourier transform (FFT)-accelerated and Tucker-enhanced integral equation simulator for capacitance extraction of voxelized structures, is proposed. The VoxCap solves the surface integral equations (SIEs) for conductor and dielectric surfaces with three key attributes that make the VoxCap highly CPU and memory efficient for the capacitance extraction of the voxelized structures: (i)…
▽ More
VoxCap, a fast Fourier transform (FFT)-accelerated and Tucker-enhanced integral equation simulator for capacitance extraction of voxelized structures, is proposed. The VoxCap solves the surface integral equations (SIEs) for conductor and dielectric surfaces with three key attributes that make the VoxCap highly CPU and memory efficient for the capacitance extraction of the voxelized structures: (i) VoxCap exploits the FFTs for accelerating the matrix-vector multiplications during the iterative solution of linear system of equations arising due to the discretization of SIEs. (ii) During the iterative solution, VoxCap uses a highly effective and memory-efficient preconditioner that reduces the number of iterations significantly. (iii) VoxCap employs Tucker decompositions to compress the block Toeplitz and circulant tensors, requiring the largest memory in the simulator. By doing so, it reduces the memory requirement of these tensors from hundreds of gigabytes to a few megabytes and the CPU time required to obtain Toeplitz tensors from tens of minutes (even hours) to a few seconds for very large scale problems. VoxCap is capable of accurately computing capacitance of arbitrarily shaped and large-scale voxelized structures on a desktop computer.
△ Less
Submitted 26 August, 2020; v1 submitted 2 April, 2020;
originally announced April 2020.
-
Model-aided Deep Neural Network for Source Number Detection
Authors:
Yuwen Yang,
Feifei Gao,
Cheng Qian,
Guisheng Liao
Abstract:
Source number detection is a critical problem in array signal processing. Conventional model-driven methods e.g., Akaikes information criterion (AIC) and minimum description length (MDL), suffer from severe performance degradation when the number of snapshots is small or the signal-to-noise ratio (SNR) is low. In this paper, we exploit the model-aided based deep neural network (DNN) to estimate th…
▽ More
Source number detection is a critical problem in array signal processing. Conventional model-driven methods e.g., Akaikes information criterion (AIC) and minimum description length (MDL), suffer from severe performance degradation when the number of snapshots is small or the signal-to-noise ratio (SNR) is low. In this paper, we exploit the model-aided based deep neural network (DNN) to estimate the source number. Specifically, we first propose the eigenvalue based regression network (ERNet) and classification network (ECNet) to estimate the number of non-coherent sources, where the eigenvalues of the received signal covariance matrix and the source number are used as the input and the supervise label of the networks, respectively. Then, we extend the ERNet and ECNet for estimating the number of coherent sources, where the forward-backward spatial smoothing (FBSS) scheme is adopted to improve the performance of ERNet and ECNet. Numerical results demonstrate the outstanding performance of ERNet and ECNet over the conventional AIC and MDL methods as well as their excellent generalization capability, which also shows their great potentials for practical applications.
△ Less
Submitted 3 October, 2019; v1 submitted 29 September, 2019;
originally announced September 2019.
-
Gridless Angular Domain Channel Estimation for mmWave Massive MIMO System With One-Bit Quantization Via Approximate Message Passing
Authors:
Liangyuan Xu,
Feifei Gao,
Cheng Qian
Abstract:
We develop a direction of arrival (DoA) and channel estimation algorithm for the one-bit quantized millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) system. By formulating the estimation problem as a noisy one-bit compressed sensing problem, we propose a computationally efficient gridless solution based on the expectation-maximization generalized approximate message passing (E…
▽ More
We develop a direction of arrival (DoA) and channel estimation algorithm for the one-bit quantized millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) system. By formulating the estimation problem as a noisy one-bit compressed sensing problem, we propose a computationally efficient gridless solution based on the expectation-maximization generalized approximate message passing (EMGAMP) approach. The proposed algorithm does not need the prior knowledge about the number of DoAs and outperforms the existing methods in distinguishing extremely close DoAs for the case of one-bit quantization. Both the DoAs and the channel coefficients are estimated for the case of one-bit quantization. The simulation results show that the proposed algorithm has effective estimation performances when the DoAs are very close to each other.
△ Less
Submitted 22 September, 2019;
originally announced September 2019.
-
Amplitude Retrieval for Channel Estimation of MIMO Systems with One-Bit ADCs
Authors:
Cheng Qian,
Xiao Fu,
Nicholas D. Sidiropoulos
Abstract:
This letter revisits the channel estimation problem for MIMO systems with one-bit analog-to-digital converters (ADCs) through a novel algorithm--Amplitude Retrieval (AR). Unlike the state-of-the-art methods such as those based on one-bit compressive sensing, AR takes a different approach. It accounts for the lost amplitudes of the one-bit quantized measurements, and performs channel estimation and…
▽ More
This letter revisits the channel estimation problem for MIMO systems with one-bit analog-to-digital converters (ADCs) through a novel algorithm--Amplitude Retrieval (AR). Unlike the state-of-the-art methods such as those based on one-bit compressive sensing, AR takes a different approach. It accounts for the lost amplitudes of the one-bit quantized measurements, and performs channel estimation and amplitude completion jointly. This way, the direction information of the propagation paths can be estimated via accurate direction finding algorithms in array processing, e.g., maximum likelihood. The upsot is that AR is able to handle off-grid angles and provide more accurate channel estimates. Simulation results are included to showcase the advantages of AR.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
Algebraic Channel Estimation Algorithms for FDD Massive MIMO systems
Authors:
Cheng Qian,
Xiao Fu,
Nicholas D. Sidiropoulos
Abstract:
We consider downlink (DL) channel estimation for frequency division duplex based massive MIMO systems under the multipath model. Our goal is to provide fast and accurate channel estimation from a small amount of DL training overhead. Prior art tackles this problem using compressive sensing or classic array processing techniques (e.g., ESPRIT and MUSIC). However, these methods have challenges in so…
▽ More
We consider downlink (DL) channel estimation for frequency division duplex based massive MIMO systems under the multipath model. Our goal is to provide fast and accurate channel estimation from a small amount of DL training overhead. Prior art tackles this problem using compressive sensing or classic array processing techniques (e.g., ESPRIT and MUSIC). However, these methods have challenges in some scenarios, e.g., when the number of paths is greater than the number of receive antennas. Tensor factorization methods can also be used to handle such challenging cases, but it is hard to solve the associated optimization problems. In this work, we propose an efficient channel estimation framework to circumvent such difficulties. Specifically, a structural training sequence that imposes a tensor structure on the received signal is proposed. We show that with such a training sequence, the parameters of DL MIMO channels can be provably identified even when the number of paths largely exceeds the number of receive antennas---under very small training overhead. Our approach is a judicious combination of Vandermonde tensor algebra and a carefully designed conjugate-invariant training sequence. Unlike existing tensor-based channel estimation methods that involve hard optimization problems, the proposed approach consists of very lightweight algebraic operations, and thus real-time implementation is within reach. Simulation results are carried out to showcase the effectiveness of the proposed methods.
△ Less
Submitted 12 July, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Tensor-Based Channel Estimation for Dual-Polarized Massive MIMO Systems
Authors:
Cheng Qian,
Xiao Fu,
Nicholas D. Sidiropoulos,
Ye Yang
Abstract:
The 3GPP suggests to combine dual polarized (DP) antenna arrays with the double directional (DD) channel model for downlink channel estimation. This combination strikes a good balance between high-capacity communications and parsimonious channel modeling, and also brings limited feedback schemes for downlink channel state information within reach---since such channel can be fully characterized by…
▽ More
The 3GPP suggests to combine dual polarized (DP) antenna arrays with the double directional (DD) channel model for downlink channel estimation. This combination strikes a good balance between high-capacity communications and parsimonious channel modeling, and also brings limited feedback schemes for downlink channel state information within reach---since such channel can be fully characterized by several key parameters. However, most existing channel estimation work under the DD model has not yet considered DP arrays, perhaps because of the complex array manifold and the resulting difficulty in algorithm design. In this paper, we first reveal that the DD channel with DP arrays at the transmitter and receiver can be naturally modeled as a low-rank tensor, and thus the key parameters of the channel can be effectively estimated via tensor decomposition algorithms.
On the theory side, we show that the DD-DP parameters are identifiable under very mild conditions, by leveraging identifiability of low-rank tensors. Furthermore, a compressed tensor decomposition algorithm is developed for alleviating the downlink training overhead. We show that, by using judiciously designed pilot structure, the channel parameters are still guaranteed to be identified via the compressed tensor decomposition formulation even when the size of the pilot sequence is much smaller than what is needed for conventional channel identification methods, such as linear least squares and matched filtering.
Numerical simulations are presented to showcase the effectiveness of the proposed methods.
△ Less
Submitted 26 October, 2018; v1 submitted 6 May, 2018;
originally announced May 2018.
-
Tensor-Based Parameter Estimation of Double Directional Massive MIMO Channel with Dual-Polarized Antennas
Authors:
Cheng Qian,
Xiao Fu,
Nicholas D. Sidiropoulos,
Ye Yang
Abstract:
The 3GPP suggests to combine dual polarized (DP) antenna arrays with the double directional (DD) channel model for downlink channel estimation. This combination strikes a good balance between high-capacity communications and parsimonious channel modeling, and also brings limited feedback schemes for downlink channel estimation within reach. However, most existing channel estimation work under the…
▽ More
The 3GPP suggests to combine dual polarized (DP) antenna arrays with the double directional (DD) channel model for downlink channel estimation. This combination strikes a good balance between high-capacity communications and parsimonious channel modeling, and also brings limited feedback schemes for downlink channel estimation within reach. However, most existing channel estimation work under the DD model has not considered DP arrays, perhaps because of the complex array manifold and the resulting difficulty in algorithm design. In this paper, we first reveal that the DD channel with DP arrays at the transmitter and receiver can be naturally modeled as a low-rank four-way tensor, and thus the parameters can be effectively estimated via tensor decomposition algorithms. To reduce computational complexity, we show that the problem can be recast as a four-snapshot three-dimensional harmonic retrieval problem, which can be solved using computationally efficient subspace methods. On the theory side, we show that the DD channel with DP arrays is identifiable under very mild conditions, leveraging identifiability of low-rank tensors. Numerical simulations are employed to showcase the effectiveness of our methods.
△ Less
Submitted 3 March, 2018;
originally announced March 2018.
-
Enabling Multiple Access for Non-Line-of-Sight Light-to-Camera Communications
Authors:
Fan Yang,
Shining Li,
Zhe Yang,
Tao Gu,
Cheng Qian
Abstract:
Light-to-Camera Communications (LCC) have emerged as a new wireless communication technology with great potential to benefit a broad range of applications. However, the existing LCC systems either require cameras directly facing to the lights or can only communicate over a single link, resulting in low throughputs and being fragile to ambient illuminant interference. We present HYCACO, a novel LCC…
▽ More
Light-to-Camera Communications (LCC) have emerged as a new wireless communication technology with great potential to benefit a broad range of applications. However, the existing LCC systems either require cameras directly facing to the lights or can only communicate over a single link, resulting in low throughputs and being fragile to ambient illuminant interference. We present HYCACO, a novel LCC system, which enables multiple light emitting diodes (LEDs) with an unaltered camera to communicate via the non-line-of-sight (NLoS) links. Different from other NLoS LCC systems, the proposed scheme is resilient to the complex indoor luminous environment. HYCACO can decode the messages by exploring the mixed reflected optical signals transmitted from multiple LEDs. By further exploiting the rolling shutter mechanism, we present the optimal optical frequencies and camera exposure duration selection strategy to achieve the best performance. We built a hardware prototype to demonstrate the efficiency of the proposed scheme under different application scenarios. The experimental results show that the system throughput reaches 4.5 kbps on iPhone 6s with three transmitters. With the robustness, improved system throughput and ease of use, HYCACO has great potentials to be used in a wide range of applications such as advertising, tagging objects, and device certifications.
△ Less
Submitted 1 August, 2018; v1 submitted 26 February, 2018;
originally announced February 2018.
-
A Generic Formation Controller and State Observer for Multiple Unmanned Systems
Authors:
Rajdeep Dutta,
Chunjiang Qian,
Liang Sun,
Daniel Pack
Abstract:
In this paper, we present a novel decentralized controller to drive multiple unmanned aerial vehicles (UAVs) into a symmetric formation of regular polygon shape surrounding a mobile target. The proposed controller works for time-varying information exchange topologies among agents and preserves a network connectivity while steering UAVs into a formation. The proposed nonlinear controller is highly…
▽ More
In this paper, we present a novel decentralized controller to drive multiple unmanned aerial vehicles (UAVs) into a symmetric formation of regular polygon shape surrounding a mobile target. The proposed controller works for time-varying information exchange topologies among agents and preserves a network connectivity while steering UAVs into a formation. The proposed nonlinear controller is highly generalized and offers flexibility in achieving the control objective due to the freedom of choosing controller parameters from a range of values. By the virtue of additional tuning parameters, i.e. fractional powers on proportional and derivative difference terms, the nonlinear controller procures a family of UAV trajectories satisfying the same control objective. An appropriate adjustment of the parameters facilitates in generating smooth UAV trajectories without causing abrupt position jumps. The convergence of the closed-loop system is analyzed and established using the Lyapunov approach. Simulation results validate the effectiveness of the proposed controller which outperforms an existing formation controller by driving a team of UAVs elegantly in a target-centric formation. We also present a nonlinear observer to estimate vehicle velocities with the availability of position coordinates and heading angles. Simulation results show that the proposed nonlinear observer results in quick convergence of the estimates to its true values.
△ Less
Submitted 5 September, 2017;
originally announced September 2017.
