-
Closing the AI generalization gap by adjusting for dermatology condition distribution differences across clinical settings
Authors:
Rajeev V. Rikhye,
Aaron Loh,
Grace Eunhae Hong,
Preeti Singh,
Margaret Ann Smith,
Vijaytha Muralidharan,
Doris Wong,
Rory Sayres,
Michelle Phung,
Nicolas Betancourt,
Bradley Fong,
Rachna Sahasrabudhe,
Khoban Nasim,
Alec Eschholz,
Basil Mustafa,
Jan Freyberg,
Terry Spitz,
Yossi Matias,
Greg S. Corrado,
Katherine Chou,
Dale R. Webster,
Peggy Bui,
Yuan Liu,
Yun Liu,
Justin Ko
, et al. (1 additional authors not shown)
Abstract:
Recently, there has been great progress in the ability of artificial intelligence (AI) algorithms to classify dermatological conditions from clinical photographs. However, little is known about the robustness of these algorithms in real-world settings where several factors can lead to a loss of generalizability. Understanding and overcoming these limitations will permit the development of generali…
▽ More
Recently, there has been great progress in the ability of artificial intelligence (AI) algorithms to classify dermatological conditions from clinical photographs. However, little is known about the robustness of these algorithms in real-world settings where several factors can lead to a loss of generalizability. Understanding and overcoming these limitations will permit the development of generalizable AI that can aid in the diagnosis of skin conditions across a variety of clinical settings. In this retrospective study, we demonstrate that differences in skin condition distribution, rather than in demographics or image capture mode are the main source of errors when an AI algorithm is evaluated on data from a previously unseen source. We demonstrate a series of steps to close this generalization gap, requiring progressively more information about the new source, ranging from the condition distribution to training data enriched for data less frequently seen during training. Our results also suggest comparable performance from end-to-end fine tuning versus fine tuning solely the classification layer on top of a frozen embedding model. Our approach can inform the adaptation of AI algorithms to new settings, based on the information and resources available.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Ant Colony Optimization for Cooperative Inspection Path Planning Using Multiple Unmanned Aerial Vehicles
Authors:
Duy Nam Bui,
Thuy Ngan Duong,
Manh Duong Phung
Abstract:
This paper presents a new swarm intelligence-based approach to deal with the cooperative path planning problem of unmanned aerial vehicles (UAVs), which is essential for the automatic inspection of infrastructure. The approach uses a 3D model of the structure to generate viewpoints for the UAVs. The calculation of the viewpoints considers the constraints related to the UAV formation model, camera…
▽ More
This paper presents a new swarm intelligence-based approach to deal with the cooperative path planning problem of unmanned aerial vehicles (UAVs), which is essential for the automatic inspection of infrastructure. The approach uses a 3D model of the structure to generate viewpoints for the UAVs. The calculation of the viewpoints considers the constraints related to the UAV formation model, camera parameters, and requirements for data post-processing. The viewpoints are then used as input to formulate the path planning as an extended traveling salesman problem and the definition of a new cost function. Ant colony optimization is finally used to solve the problem to yield optimal inspection paths. Experiments with 3D models of real structures have been conducted to evaluate the performance of the proposed approach. The results show that our system is not only capable of generating feasible inspection paths for UAVs but also reducing the path length by 29.47\% for complex structures when compared with another heuristic approach. The source code of the algorithm can be found at https://github.com/duynamrcv/aco_3d_ipp.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Lyapunov-based Nonlinear Model Predictive Control for Attitude Trajectory Tracking of Unmanned Aerial Vehicles
Authors:
Duy Nam Bui,
Thi Thanh Van Nguyen,
Manh Duong Phung
Abstract:
This paper presents a new Lyapunov-based nonlinear model predictive controller (LNMPC) for the attitude control problem of unmanned aerial vehicles (UAVs), which is essential for their functioning operation. The controller is designed based on a quadratic cost function integrating UAV dynamics and system constraints. An additional contraction constraint is then introduced to ensure closed-loop sys…
▽ More
This paper presents a new Lyapunov-based nonlinear model predictive controller (LNMPC) for the attitude control problem of unmanned aerial vehicles (UAVs), which is essential for their functioning operation. The controller is designed based on a quadratic cost function integrating UAV dynamics and system constraints. An additional contraction constraint is then introduced to ensure closed-loop system stability. That constraint is fulfilled via a Lyapunov function derived from a sliding mode controller (SMC). The feasibility and stability of the LNMPC are finally proved. Simulation and comparison results show that the proposed controller guarantees the system stability and outperforms other state-of-the-art nonlinear controllers such as the backstep** controller (BSC) and SMC. In addition, the proposed controller can be integrated into an existing UAV model in the Gazebo simulator to perform software-in-the-loop tests. The results show that the LNMPC is better than the built-in PID controller of the UAV, which confirms the validity and applicability of our proposed approach.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Development and Clinical Evaluation of an AI Support Tool for Improving Telemedicine Photo Quality
Authors:
Kailas Vodrahalli,
Justin Ko,
Albert S. Chiou,
Roberto Novoa,
Abubakar Abid,
Michelle Phung,
Kiana Yekrang,
Paige Petrone,
James Zou,
Roxana Daneshjou
Abstract:
Telemedicine utilization was accelerated during the COVID-19 pandemic, and skin conditions were a common use case. However, the quality of photographs sent by patients remains a major limitation. To address this issue, we developed TrueImage 2.0, an artificial intelligence (AI) model for assessing patient photo quality for telemedicine and providing real-time feedback to patients for photo quality…
▽ More
Telemedicine utilization was accelerated during the COVID-19 pandemic, and skin conditions were a common use case. However, the quality of photographs sent by patients remains a major limitation. To address this issue, we developed TrueImage 2.0, an artificial intelligence (AI) model for assessing patient photo quality for telemedicine and providing real-time feedback to patients for photo quality improvement. TrueImage 2.0 was trained on 1700 telemedicine images annotated by clinicians for photo quality. On a retrospective dataset of 357 telemedicine images, TrueImage 2.0 effectively identified poor quality images (Receiver operator curve area under the curve (ROC-AUC) =0.78) and the reason for poor quality (Blurry ROC-AUC=0.84, Lighting issues ROC-AUC=0.70). The performance is consistent across age, gender, and skin tone. Next, we assessed whether patient-TrueImage 2.0 interaction led to an improvement in submitted photo quality through a prospective clinical pilot study with 98 patients. TrueImage 2.0 reduced the number of patients with a poor-quality image by 68.0%.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
Classification of EEG Motor Imagery Using Deep Learning for Brain-Computer Interface Systems
Authors:
Alessandro Gallo,
Manh Duong Phung
Abstract:
A trained T1 class Convolutional Neural Network (CNN) model will be used to examine its ability to successfully identify motor imagery when fed pre-processed electroencephalography (EEG) data. In theory, and if the model has been trained accurately, it should be able to identify a class and label it accordingly. The CNN model will then be restored and used to try and identify the same class of mot…
▽ More
A trained T1 class Convolutional Neural Network (CNN) model will be used to examine its ability to successfully identify motor imagery when fed pre-processed electroencephalography (EEG) data. In theory, and if the model has been trained accurately, it should be able to identify a class and label it accordingly. The CNN model will then be restored and used to try and identify the same class of motor imagery data using much smaller sampled data in an attempt to simulate live data.
△ Less
Submitted 31 May, 2022;
originally announced June 2022.
-
Disparities in Dermatology AI Performance on a Diverse, Curated Clinical Image Set
Authors:
Roxana Daneshjou,
Kailas Vodrahalli,
Roberto A Novoa,
Melissa Jenkins,
Weixin Liang,
Veronica Rotemberg,
Justin Ko,
Susan M Swetter,
Elizabeth E Bailey,
Olivier Gevaert,
Pritam Mukherjee,
Michelle Phung,
Kiana Yekrang,
Bradley Fong,
Rachna Sahasrabudhe,
Johan A. C. Allerup,
Utako Okata-Karigane,
James Zou,
Albert Chiou
Abstract:
Access to dermatological care is a major issue, with an estimated 3 billion people lacking access to care globally. Artificial intelligence (AI) may aid in triaging skin diseases. However, most AI models have not been rigorously assessed on images of diverse skin tones or uncommon diseases. To ascertain potential biases in algorithm performance in this context, we curated the Diverse Dermatology I…
▽ More
Access to dermatological care is a major issue, with an estimated 3 billion people lacking access to care globally. Artificial intelligence (AI) may aid in triaging skin diseases. However, most AI models have not been rigorously assessed on images of diverse skin tones or uncommon diseases. To ascertain potential biases in algorithm performance in this context, we curated the Diverse Dermatology Images (DDI) dataset-the first publicly available, expertly curated, and pathologically confirmed image dataset with diverse skin tones. Using this dataset of 656 images, we show that state-of-the-art dermatology AI models perform substantially worse on DDI, with receiver operator curve area under the curve (ROC-AUC) drop** by 27-36 percent compared to the models' original test results. All the models performed worse on dark skin tones and uncommon diseases, which are represented in the DDI dataset. Additionally, we find that dermatologists, who typically provide visual labels for AI training and test datasets, also perform worse on images of dark skin tones and uncommon diseases compared to ground truth biopsy annotations. Finally, fine-tuning AI models on the well-characterized and diverse DDI images closed the performance gap between light and dark skin tones. Moreover, algorithms fine-tuned on diverse skin tones outperformed dermatologists on identifying malignancy on images of dark skin tones. Our findings identify important weaknesses and biases in dermatology AI that need to be addressed to ensure reliable application to diverse patients and diseases.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Disparities in Dermatology AI: Assessments Using Diverse Clinical Images
Authors:
Roxana Daneshjou,
Kailas Vodrahalli,
Weixin Liang,
Roberto A Novoa,
Melissa Jenkins,
Veronica Rotemberg,
Justin Ko,
Susan M Swetter,
Elizabeth E Bailey,
Olivier Gevaert,
Pritam Mukherjee,
Michelle Phung,
Kiana Yekrang,
Bradley Fong,
Rachna Sahasrabudhe,
James Zou,
Albert Chiou
Abstract:
More than 3 billion people lack access to care for skin disease. AI diagnostic tools may aid in early skin cancer detection; however most models have not been assessed on images of diverse skin tones or uncommon diseases. To address this, we curated the Diverse Dermatology Images (DDI) dataset - the first publicly available, pathologically confirmed images featuring diverse skin tones. We show tha…
▽ More
More than 3 billion people lack access to care for skin disease. AI diagnostic tools may aid in early skin cancer detection; however most models have not been assessed on images of diverse skin tones or uncommon diseases. To address this, we curated the Diverse Dermatology Images (DDI) dataset - the first publicly available, pathologically confirmed images featuring diverse skin tones. We show that state-of-the-art dermatology AI models perform substantially worse on DDI, with ROC-AUC drop** 29-40 percent compared to the models' original results. We find that dark skin tones and uncommon diseases, which are well represented in the DDI dataset, lead to performance drop-offs. Additionally, we show that state-of-the-art robust training methods cannot correct for these biases without diverse training data. Our findings identify important weaknesses and biases in dermatology AI that need to be addressed to ensure reliable application to diverse patients and across all disease.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Mobile Robot Localization Using Fuzzy Neural Network Based Extended Kalman Filter
Authors:
Thi Thanh Van Nguyen,
Manh Duong Phung,
Thuan Hoang Tran,
Quang Vinh Tran
Abstract:
This paper proposes a novel approach to improve the performance of the extended Kalman filter (EKF) for the problem of mobile robot localization. A fuzzy logic system is employed to continuous-ly adjust the noise covariance matrices of the filter. A neural network is implemented to regulate the membership functions of the antecedent and consequent parts of the fuzzy rules. The aim is to gain the a…
▽ More
This paper proposes a novel approach to improve the performance of the extended Kalman filter (EKF) for the problem of mobile robot localization. A fuzzy logic system is employed to continuous-ly adjust the noise covariance matrices of the filter. A neural network is implemented to regulate the membership functions of the antecedent and consequent parts of the fuzzy rules. The aim is to gain the accuracy and avoid the divergence of the EKF when the noise covariance matrices are fixed or wrongly determined. Simulations and experiments have been conducted. The results show that the proposed filter is better than the EKF in localizing the mobile robot.
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Safety-enhanced UAV Path Planning with Spherical Vector-based Particle Swarm Optimization
Authors:
Manh Duong Phung,
Quang Phuc Ha
Abstract:
This paper presents a new algorithm named spherical vector-based particle swarm optimization (SPSO) to deal with the problem of path planning for unmanned aerial vehicles (UAVs) in complicated environments subjected to multiple threats. A cost function is first formulated to convert the path planning into an optimization problem that incorporates requirements and constraints for the feasible and s…
▽ More
This paper presents a new algorithm named spherical vector-based particle swarm optimization (SPSO) to deal with the problem of path planning for unmanned aerial vehicles (UAVs) in complicated environments subjected to multiple threats. A cost function is first formulated to convert the path planning into an optimization problem that incorporates requirements and constraints for the feasible and safe operation of the UAV. SPSO is then used to find the optimal path that minimizes the cost function by efficiently searching the configuration space of the UAV via the correspondence between the particle position and the speed, turn angle and climb/dive angle of the UAV. To evaluate the performance of SPSO, eight benchmarking scenarios have been generated from real digital elevation model maps. The results show that the proposed SPSO outperforms not only other particle swarm optimization (PSO) variants including the classic PSO, phase angle-encoded PSO and quantum-behave PSO but also other state-of-the-art metaheuristic optimization algorithms including the genetic algorithm (GA), artificial bee colony (ABC), and differential evolution (DE) in most scenarios. In addition, experiments have been conducted to demonstrate the validity of the generated paths for real UAV operations. Source code of the algorithm can be found at https://github.com/duongpm/SPSO.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Speak or Chat with Me: End-to-End Spoken Language Understanding System with Flexible Inputs
Authors:
Sujeong Cha,
Wangrui Hou,
Hyun Jung,
My Phung,
Michael Picheny,
Hong-Kwang Kuo,
Samuel Thomas,
Edmilson Morais
Abstract:
A major focus of recent research in spoken language understanding (SLU) has been on the end-to-end approach where a single model can predict intents directly from speech inputs without intermediate transcripts. However, this approach presents some challenges. First, since speech can be considered as personally identifiable information, in some cases only automatic speech recognition (ASR) transcri…
▽ More
A major focus of recent research in spoken language understanding (SLU) has been on the end-to-end approach where a single model can predict intents directly from speech inputs without intermediate transcripts. However, this approach presents some challenges. First, since speech can be considered as personally identifiable information, in some cases only automatic speech recognition (ASR) transcripts are accessible. Second, intent-labeled speech data is scarce. To address the first challenge, we propose a novel system that can predict intents from flexible types of inputs: speech, ASR transcripts, or both. We demonstrate strong performance for either modality separately, and when both speech and ASR transcripts are available, through system combination, we achieve better results than using a single input modality. To address the second challenge, we leverage a semantically robust pre-trained BERT model and adopt a cross-modal system that co-trains text embeddings and acoustic embeddings in a shared latent space. We further enhance this system by utilizing an acoustic module pre-trained on LibriSpeech and domain-adapting the text module on our target datasets. Our experiments show significant advantages for these pre-training and fine-tuning strategies, resulting in a system that achieves competitive intent-classification performance on Snips SLU and Fluent Speech Commands datasets.
△ Less
Submitted 14 June, 2021; v1 submitted 7 April, 2021;
originally announced April 2021.
-
Built Infrastructure Monitoring and Inspection Using UAVs and Vision-based Algorithms
Authors:
Khai Ky Ly,
Manh Duong Phung
Abstract:
This study presents an inspecting system using real-time control unmanned aerial vehicles (UAVs) to investigate structural surfaces. The system operates under favourable weather conditions to inspect a target structure, which is the Wentworth light rail base structure in this study. The system includes a drone, a GoPro HERO4 camera, a controller and a mobile phone. The drone takes off the ground m…
▽ More
This study presents an inspecting system using real-time control unmanned aerial vehicles (UAVs) to investigate structural surfaces. The system operates under favourable weather conditions to inspect a target structure, which is the Wentworth light rail base structure in this study. The system includes a drone, a GoPro HERO4 camera, a controller and a mobile phone. The drone takes off the ground manually in the testing field to collect the data requiring for later analysis. The images are taken through HERO 4 camera and then transferred in real time to the remote processing unit such as a ground control station by the wireless connection established by a Wi-Fi router. An image processing method has been proposed to detect defects or damages such as cracks. The method based on intensity histogram algorithms to exploit the pixel group related to the crack contained in the low intensity interval. Experiments, simulation and comparisons have been conducted to evaluate the performance and validity of the proposed system.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Recognition of 26 Degrees of Freedom of Hands Using Model-based approach and Depth-Color Images
Authors:
Cong Hoang Quach,
Minh Trien Pham,
Anh Viet Dang,
Dinh Tuan Pham,
Thuan Hoang Tran,
Manh Duong Phung
Abstract:
In this study, we present an model-based approach to recognize full 26 degrees of freedom of a human hand. Input data include RGB-D images acquired from a Kinect camera and a 3D model of the hand constructed from its anatomy and graphical matrices. A cost function is then defined so that its minimum value is achieved when the model and observation images are matched. To solve the optimization prob…
▽ More
In this study, we present an model-based approach to recognize full 26 degrees of freedom of a human hand. Input data include RGB-D images acquired from a Kinect camera and a 3D model of the hand constructed from its anatomy and graphical matrices. A cost function is then defined so that its minimum value is achieved when the model and observation images are matched. To solve the optimization problem in 26 dimensional space, the particle swarm optimization algorimth with improvements are used. In addition, parallel computation in graphical processing units (GPU) is utilized to handle computationally expensive tasks. Simulation and experimental results show that the system can recognize 26 degrees of freedom of hands with the processing time of 0.8 seconds per frame. The algorithm is robust to noise and the hardware requirement is simple with a single camera.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Robust asymptotic stability of two-wheels differential drive mobile robot
Authors:
Thi Thanh Van Nguyen,
Manh Duong Phung,
Quang Vinh Tran
Abstract:
The paper proposes the stable motion control law design method for non-honomic differential-drive mobile robot with system and measurement noise in discrete time domain. This method is performed basing on dividing operating configuration of robot into two parts: glocal and local configuration then the control law is designed following Lyapunov stable theory for two configuration. The proposed stab…
▽ More
The paper proposes the stable motion control law design method for non-honomic differential-drive mobile robot with system and measurement noise in discrete time domain. This method is performed basing on dividing operating configuration of robot into two parts: glocal and local configuration then the control law is designed following Lyapunov stable theory for two configuration. The proposed stable control laws is able to reach asymptotically stably to target position and orientation from any initial conditions even existing noise in the system. Some simulation results have demonstrated the effect of proposed method.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Using multiple sensors for autonomous mobile robot navigation
Authors:
Thuan Hoang Tran,
Manh Duong Phung,
Anh Viet Dang,
Quang Vinh Tran
Abstract:
This paper presents the use of multi-sensor measurement system to guide autonomous mobile robot in the house. The system allows the 3D image acquisition to global map**, and algorithms to reduce the dimensionality of images to 2D global map navigation, trajectory design approach using the Lyapunov function method and avoid obstacles by the potential energy can also be presented. Also, sensor int…
▽ More
This paper presents the use of multi-sensor measurement system to guide autonomous mobile robot in the house. The system allows the 3D image acquisition to global map**, and algorithms to reduce the dimensionality of images to 2D global map navigation, trajectory design approach using the Lyapunov function method and avoid obstacles by the potential energy can also be presented. Also, sensor integrated method based on extended Kalman filter allows us to identify the exact location and orientation of the robot in the presence of interference from the environment.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Stabilization control of networked mobile robot using past observation-based preditive filter
Authors:
Manh Duong Phung,
Thi Thanh Van Nguyen,
Thuan Hoang Tran,
Quang Vinh Tran
Abstract:
This paper addresses the stabilization control problem for networked mobile robot subject to communication delay. A new state estimation filter namely past observation-based predictive filter is developed. This filter enables the prediction of system state from delayed measurement. The state estimator combined with developed control laws ensures the asymptotic stability of the networked system. Si…
▽ More
This paper addresses the stabilization control problem for networked mobile robot subject to communication delay. A new state estimation filter namely past observation-based predictive filter is developed. This filter enables the prediction of system state from delayed measurement. The state estimator combined with developed control laws ensures the asymptotic stability of the networked system. Simulations with parameters extracted from a real robot system were conducted and results confirmed the correctness as well as applicability of proposed approach.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Sensing Data Fusion for Enhanced Indoor Air Quality Monitoring
Authors:
Q. P. Ha,
S. Metia,
M. D. Phung
Abstract:
Multisensor fusion of air pollutant data in smart buildings remains an important input to address the well-being and comfort perceived by their inhabitants. An integrated sensing system is part of a smart building where real-time indoor air quality data are monitored round the clock using sensors and operating in the Internet-of-Things (IoT) environment. In this work, we propose an air quality man…
▽ More
Multisensor fusion of air pollutant data in smart buildings remains an important input to address the well-being and comfort perceived by their inhabitants. An integrated sensing system is part of a smart building where real-time indoor air quality data are monitored round the clock using sensors and operating in the Internet-of-Things (IoT) environment. In this work, we propose an air quality management system merging indoor air quality index (IAQI) and humidex into an enhanced indoor air quality index (EIAQI) by using sensor data on a real-time basis. Here, indoor air pollutant levels are measured by a network of waspmote sensors while IAQI and humidex data are fused together using an extended fractional-order Kalman filter (EFKF). According to the obtained EIAQI, overall air quality alerts are provided in a timely fashion for accurate prediction with enhanced performance against measurement noise and nonlinearity. The estimation scheme is implemented by using the fractional-order modeling and control (FOMCON) toolbox. A case study is analysed to prove the effectiveness and validity of the proposed approach.
△ Less
Submitted 7 January, 2020;
originally announced January 2020.
-
Crack Detection Using Enhanced Hierarchical Convolutional Neural Networks
Authors:
Qiuchen Zhu,
Manh Duong Phung,
Quang Ha
Abstract:
Unmanned aerial vehicles (UAV) are expected to replace human in hazardous tasks of surface inspection due to their flexibility in operating space and capability of collecting high quality visual data. In this study, we propose enhanced hierarchical convolutional neural networks (HCNN) to detect cracks from image data collected by UAVs. Unlike traditional HCNN, here a set of branch networks is util…
▽ More
Unmanned aerial vehicles (UAV) are expected to replace human in hazardous tasks of surface inspection due to their flexibility in operating space and capability of collecting high quality visual data. In this study, we propose enhanced hierarchical convolutional neural networks (HCNN) to detect cracks from image data collected by UAVs. Unlike traditional HCNN, here a set of branch networks is utilised to reduce the obscuration in the down-sampling process. Moreover, the feature preserving blocks combine the current and previous terms from the convolutional blocks to provide input to the loss functions. As a result, the weights of resized images can be reduced to minimise the information loss. Experiments on images of different crack datasets have been carried out to demonstrate the effectiveness of proposed HCNN.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Reconfigurable Multi-UAV Formation Using Angle-Encoded PSO
Authors:
V. T. Hoang,
M. D. Phung,
T. H. Dinh,
Q. Zhu,
Q. P. Ha
Abstract:
In this paper, we propose an algorithm for the formation of multiple UAVs used in vision-based inspection of infrastructure. A path planning algorithm is first developed by using a variant of the particle swarm optimisation, named theta-PSO, to generate a feasible path for the overall formation configuration taken into account the constraints for visual inspection. Here, we introduced a cost funct…
▽ More
In this paper, we propose an algorithm for the formation of multiple UAVs used in vision-based inspection of infrastructure. A path planning algorithm is first developed by using a variant of the particle swarm optimisation, named theta-PSO, to generate a feasible path for the overall formation configuration taken into account the constraints for visual inspection. Here, we introduced a cost function that includes various constraints on flight safety and visual inspection. A reconfigurable topology is then added based on the use of intermediate waypoints to allow the formation to avoid collision with obstacles during operation. The planned path and formation are then combined to derive the trajectory and velocity profiles for each UAV. Experiments have been conducted for the task of inspecting a light rail bridge. The results confirmed the validity and effectiveness of the proposed algorithm.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
System Architecture for Real-time Surface Inspection Using Multiple UAVs
Authors:
Van Truong Hoang,
Manh Duong Phung,
Tran Hiep Dinh,
Quang P. Ha
Abstract:
This paper presents a real-time control system for surface inspection using multiple unmanned aerial vehicles (UAVs). The UAVs are coordinated in a specific formation to collect data of the inspecting objects. The communication platform for data transmission is based on the Internet of Things (IoT). In the proposed architecture, the UAV formation is established via using the angle-encoded particle…
▽ More
This paper presents a real-time control system for surface inspection using multiple unmanned aerial vehicles (UAVs). The UAVs are coordinated in a specific formation to collect data of the inspecting objects. The communication platform for data transmission is based on the Internet of Things (IoT). In the proposed architecture, the UAV formation is established via using the angle-encoded particle swarm optimisation to generate an inspecting path and redistribute it to each UAV where communication links are embedded with an IoT board for network and data processing capabilities. Data collected are transmitted in real time through the network to remote computational units. To detect potential damage or defects, an online image processing technique is proposed and implemented based on histograms. Extensive simulation, experiments and comparisons have been conducted to verify the validity and performance of the proposed system.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
Modelling and Fast Terminal Sliding Mode Control for Mirror-based Pointing Systems
Authors:
Ansu Man Singh,
Manh Duong Phung,
Quang Ha
Abstract:
In this paper, we present a new discrete-time Fast Terminal Sliding Mode (FTSM) controller for mirror-based pointing systems. We first derive the decoupled model of those systems and then estimate the parameters using a nonlinear least-square identification method. Based on the derived model, we design a FTSM sliding manifold in the continuous domain. We then exploit the Euler discretization on th…
▽ More
In this paper, we present a new discrete-time Fast Terminal Sliding Mode (FTSM) controller for mirror-based pointing systems. We first derive the decoupled model of those systems and then estimate the parameters using a nonlinear least-square identification method. Based on the derived model, we design a FTSM sliding manifold in the continuous domain. We then exploit the Euler discretization on the designed FTSM sliding surfaces to synthesize a discrete-time controller. Furthermore, we improve the transient dynamics of the sliding surface by adding a linear term. Finally, we prove the stability of the proposed controller based on the Sarpturk reaching condition. Extensive simulations, followed by comparisons with the Terminal Sliding Mode (TSM) and Model Predictive Control (MPC) have been carried out to evaluate the effectiveness of the proposed approach. A comparative study with data obtained from a real-time experiment was also conducted. The results indicate the advantage of the proposed method over the other techniques.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
Adaptive twisting sliding mode control for quadrotor unmanned aerial vehicles
Authors:
V. T. Hoang,
M. D. Phung,
Q. P. Ha
Abstract:
This work addresses the problem of robust attitude control of quadcopters. First, the mathematical model of the quadcopter is derived considering factors such as nonlinearity, external disturbances, uncertain dynamics and strong coupling. An adaptive twisting sliding mode control algorithm is then developed with the objective of controlling the quadcopter to track desired attitudes under various c…
▽ More
This work addresses the problem of robust attitude control of quadcopters. First, the mathematical model of the quadcopter is derived considering factors such as nonlinearity, external disturbances, uncertain dynamics and strong coupling. An adaptive twisting sliding mode control algorithm is then developed with the objective of controlling the quadcopter to track desired attitudes under various conditions. For this, the twisting sliding mode control law is modified with a proposed gain adaptation scheme to improve the control transient and tracking performance. Extensive simulation studies and comparisons with experimental data have been carried out for a Solo quadcopter. The results show that the proposed control scheme can achieve strong robustness against disturbances while is adaptable to parametric variations.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Management of solar energy in microgrids using IoT-based dependable control
Authors:
Manh Duong Phung,
Michel De La Villefromoy,
Quang Ha
Abstract:
Solar energy generation requires efficient monitoring and management in moving towards technologies for net-zero energy buildings. This paper presents a dependable control system based on the Internet of Things (IoT) to control and manage the energy flow of renewable energy collected by solar panels within a microgrid. Data for optimal control include not only measurements from local sensors but a…
▽ More
Solar energy generation requires efficient monitoring and management in moving towards technologies for net-zero energy buildings. This paper presents a dependable control system based on the Internet of Things (IoT) to control and manage the energy flow of renewable energy collected by solar panels within a microgrid. Data for optimal control include not only measurements from local sensors but also meteorological information retrieved in real-time from online sources. For system fault tolerance across the whole distributed control system featuring multiple controllers, dependable controllers are developed to control and optimise the tracking performance of photovoltaic arrays to maximally capture solar radiation and maintain system resilience and reliability in real time despite failures of one or more redundant controllers due to a problem with communication, hardware or cybersecurity. Experimental results have been obtained to evaluate the validity of the proposed approach.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Adaptive Second-order Sliding Mode Control of UAVs for Civil Applications
Authors:
Van Truong Hoang,
Ansu Man Singh,
Manh Duong Phung,
Quang Ha
Abstract:
Quadcopters, as unmanned aerial vehicles (UAVs), have great potential in civil applications such as surveying, building monitoring, and infrastructure condition assessment. Quadcopters, however, are relatively sensitive to noises and disturbances so that their performance may be quickly downgraded in the case of inadequate control, system uncertainties and/or external disturbances. In this study,…
▽ More
Quadcopters, as unmanned aerial vehicles (UAVs), have great potential in civil applications such as surveying, building monitoring, and infrastructure condition assessment. Quadcopters, however, are relatively sensitive to noises and disturbances so that their performance may be quickly downgraded in the case of inadequate control, system uncertainties and/or external disturbances. In this study, we deal with the quadrotor low-level control by proposing a robust scheme named the adaptive second-order quasi-continuous sliding mode control (adaptive 2-QCSM). The ultimate objective is for robust attitude control of the UAV in monitoring and inspection of built infrastructure. First, the mathematical model of the quadcopter is derived considering nonlinearity, strong coupling, uncertain dynamics and external disturbances. The control design includes the selection of the sliding manifold and the development of quasi-continuous second-order sliding mode controller with an adaptive gain. Stability of the overall control system is analysed by using a global Lyapunov function for convergence of both the sliding dynamics and adaptation scheme. Extensive simulations have been carried out for evaluation. Results show that the proposed controller can achieve robustness against disturbances or parameter variations and has better tracking performance in comparison with experimental responses of a UAV in a real-time monitoring task.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Automatic Crack Detection in Built Infrastructure Using Unmanned Aerial Vehicles
Authors:
Manh Duong Phung,
Van Truong Hoang,
Tran Hiep Dinh,
Quang Ha
Abstract:
This paper addresses the problem of crack detection which is essential for health monitoring of built infrastructure. Our approach includes two stages, data collection using unmanned aerial vehicles (UAVs) and crack detection using histogram analysis. For the data collection, a 3D model of the structure is first created by using laser scanners. Based on the model, geometric properties are extracte…
▽ More
This paper addresses the problem of crack detection which is essential for health monitoring of built infrastructure. Our approach includes two stages, data collection using unmanned aerial vehicles (UAVs) and crack detection using histogram analysis. For the data collection, a 3D model of the structure is first created by using laser scanners. Based on the model, geometric properties are extracted to generate way points necessary for navigating the UAV to take images of the structure. Then, our next step is to stick together those obtained images from the overlapped field of view. The resulting image is then clustered by histogram analysis and peak detection. Potential cracks are finally identified by using locally adaptive thresholds. The whole process is automatically carried out so that the inspection time is significantly improved while safety hazards can be minimised. A prototypical system has been developed for evaluation and experimental results are included.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Behavior-based Navigation of Mobile Robot in Unknown Environments Using Fuzzy Logic and Multi-Objective Optimization
Authors:
Thi Thanh Van Nguyen,
Manh Duong Phung,
Quang Vinh Tran
Abstract:
This study proposes behavior-based navigation architecture, named BBFM, to deal with the problem of navigating the mobile robot in unknown environments in the presence of obstacles and local minimum regions. In the architecture, the complex navigation task is split into principal sub-tasks or behaviors. Each behavior is implemented by a fuzzy controller and executed independently to deal with a sp…
▽ More
This study proposes behavior-based navigation architecture, named BBFM, to deal with the problem of navigating the mobile robot in unknown environments in the presence of obstacles and local minimum regions. In the architecture, the complex navigation task is split into principal sub-tasks or behaviors. Each behavior is implemented by a fuzzy controller and executed independently to deal with a specific problem of navigation. The fuzzy controller is modified to contain only the fuzzification and inference procedures so that its output is a membership function representing the behavior's objective. The membership functions of all controllers are then used as the objective functions for a multi-objective optimization process to coordinate all behaviors. The result of this process is an overall control signal, which is Pareto-optimal, used to control the robot. A number of simulations, comparisons, and experiments were conducted. The results show that the proposed architecture outperforms some popular behavior-based architectures in term of accuracy, smoothness, traveled distance, and time response.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Automatic Interpretation of Unordered Point Cloud Data for UAV Navigation in Construction
Authors:
M. D. Phung,
C. H. Quach,
D. T. Chu,
N. Q. Nguyen,
T. H. Dinh,
Q. P. Ha
Abstract:
The objective of this work is to develop a data processing system that can automatically generate waypoints for navigation of an unmanned aerial vehicle (UAV) to inspect surfaces of structures like buildings and bridges. The input includes data recorded by two 2D laser scanners, orthogonally mounted on the UAV, and an inertial measurement unit (IMU). To achieve the goal, algorithms are developed t…
▽ More
The objective of this work is to develop a data processing system that can automatically generate waypoints for navigation of an unmanned aerial vehicle (UAV) to inspect surfaces of structures like buildings and bridges. The input includes data recorded by two 2D laser scanners, orthogonally mounted on the UAV, and an inertial measurement unit (IMU). To achieve the goal, algorithms are developed to process the data collected. They are separated into three major groups: (i) the data registration and filtering to generate a 3D model of the structure and control the density of point clouds for data completeness enhancement; (ii) the surface and obstacle detection to assist the UAV in monitoring tasks; and (iii) the waypoint generation to set the flight path. Experiments on different data sets show that the developed system is able to reconstruct a 3D point cloud of the structure, extract its surfaces and objects, and generate waypoints for the UAV to accomplish inspection tasks.
△ Less
Submitted 12 February, 2017; v1 submitted 22 December, 2016;
originally announced December 2016.
-
Localization of networked robot systems subject to random delay and packet loss
Authors:
Manh Duong Phung,
Thi Thanh Van Nguyen,
Thuan Hoang Tran,
Quang Vinh Tran
Abstract:
This paper deals with the localization problem of mobile robot subject to communication delay and packet loss. The delay and loss may appear in a random fashion in both control inputs and observation measurements. A unified state-space representation is constructed to describe these mixed uncertainties. Based on it, the optimal linear estimator is developed. The main idea is the derivation of a re…
▽ More
This paper deals with the localization problem of mobile robot subject to communication delay and packet loss. The delay and loss may appear in a random fashion in both control inputs and observation measurements. A unified state-space representation is constructed to describe these mixed uncertainties. Based on it, the optimal linear estimator is developed. The main idea is the derivation of a relevance factor to incorporate delayed measurements to the being estimate. The estimator is then extended for nonlinear systems. The performance of this method is tested within the simulations in MATLAB and the experiments in a real robot system. The good localization results prove the efficiency of the method for the purpose of localization of networked mobile robot.
△ Less
Submitted 3 December, 2016;
originally announced December 2016.
-
Localization of a unicycle-like mobile robot using LRF and omni-directional camera
Authors:
Tran Hiep Dinh,
Manh Duong Phung,
Thuan Hoang Tran,
Quang Vinh Tran
Abstract:
This paper addresses the localization problem. The extended Kalman filter (EKF) is employed to localize a unicycle-like mobile robot equipped with a laser range finder (LRF) sensor and an omni-directional camera. The LRF is used to scan the environment which is described with line segments. The segments are extracted by a modified least square quadratic method in which a dynamic threshold is injec…
▽ More
This paper addresses the localization problem. The extended Kalman filter (EKF) is employed to localize a unicycle-like mobile robot equipped with a laser range finder (LRF) sensor and an omni-directional camera. The LRF is used to scan the environment which is described with line segments. The segments are extracted by a modified least square quadratic method in which a dynamic threshold is injected. The camera is employed to determine the robot's orientation. The prediction step of the EKF is performed by extracting parameters from the kinematic model and input signal of the robot. The correction step is conducted with the implementation of a line matching algorithm and the comparison between line's parameters of the local and global maps. In the line matching algorithm, a conversion matrix is introduced to reduce the computation cost. Experiments have been carried out in a real mobile robot system and the results prove the applicability of the method for the purpose of localization.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.
