Showing 1–10 of 10 results for author: Pal, B

QUBIQ: Uncertainty Quantification for Biomedical Image Segmentation Challenge

Authors: Hongwei Bran Li, Fernando Navarro, Ivan Ezhov, Amirhossein Bayat, Dhritiman Das, Florian Kofler, Suprosanna Shit, Diana Waldmannstetter, Johannes C. Paetzold, Xiaobin Hu, Benedikt Wiestler, Lucas Zimmer, Tamaz Amiranashvili, Chinmay Prabhakar, Christoph Berger, Jonas Weidner, Michelle Alonso-Basant, Arif Rashid, Ujjwal Baid, Wesam Adel, Deniz Ali, Bhakti Baheti, Yingbin Bai, Ishaan Bhatt, Sabri Can Cetindag , et al. (55 additional authors not shown)

Abstract: Uncertainty in medical image segmentation tasks, especially inter-rater variability, arising from differences in interpretations and annotations by various experts, presents a significant challenge in achieving consistent and reliable image segmentation. This variability not only reflects the inherent complexity and subjective nature of medical image interpretation but also directly impacts the de… ▽ More Uncertainty in medical image segmentation tasks, especially inter-rater variability, arising from differences in interpretations and annotations by various experts, presents a significant challenge in achieving consistent and reliable image segmentation. This variability not only reflects the inherent complexity and subjective nature of medical image interpretation but also directly impacts the development and evaluation of automated segmentation algorithms. Accurately modeling and quantifying this variability is essential for enhancing the robustness and clinical applicability of these algorithms. We report the set-up and summarize the benchmark results of the Quantification of Uncertainties in Biomedical Image Quantification Challenge (QUBIQ), which was organized in conjunction with International Conferences on Medical Image Computing and Computer-Assisted Intervention (MICCAI) 2020 and 2021. The challenge focuses on the uncertainty quantification of medical image segmentation which considers the omnipresence of inter-rater variability in imaging datasets. The large collection of images with multi-rater annotations features various modalities such as MRI and CT; various organs such as the brain, prostate, kidney, and pancreas; and different image dimensions 2D-vs-3D. A total of 24 teams submitted different solutions to the problem, combining various baseline models, Bayesian neural networks, and ensemble model techniques. The obtained results indicate the importance of the ensemble models, as well as the need for further research to develop efficient 3D methods for uncertainty quantification methods in 3D segmentation tasks. △ Less

Submitted 24 June, 2024; v1 submitted 19 March, 2024; originally announced May 2024.

Comments: initial technical report

Fault Recovery and Transient Stability of Grid-Forming Converters Equipped with Current Saturation

Authors: Ali Arjomandi-Nezhad, Yifei Guo, Bikash C. Pal, Guangya Yang

Abstract: When grid-forming (GFM) inverter-based resources (IBRs) experience large grid disturbances (e.g., short-circuit faults), the current limiter may be triggered and GFM IBRs enter the current saturation mode, inducing nonlinear dynamical behaviors and imposing great challenges to the post-disturbance transient angle stability. This paper presents a systematic study to reveal the fault recovery behavi… ▽ More When grid-forming (GFM) inverter-based resources (IBRs) experience large grid disturbances (e.g., short-circuit faults), the current limiter may be triggered and GFM IBRs enter the current saturation mode, inducing nonlinear dynamical behaviors and imposing great challenges to the post-disturbance transient angle stability. This paper presents a systematic study to reveal the fault recovery behaviors of a GFM IBR and identify the risk of instability. The impact of the angle of the magnitude-saturated current on the post-fault recovery and transient stability is also investigated. The selection of the angle of magnitude-saturated current significantly influences the post-fault behaviors while a few additional dynamical conditions that have a substantial impact are also identified. It is found that the system may follow multiple post-fault recovery trajectories depending on those conditions: 1) Convergence to the normal stable equilibrium point (SEP), 2) convergence to the saturated stable equilibrium point (SSEP), and 3) divergence (instability). To examine the models' accuracy, several cases are simulated. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 10 pages, 22 figures

Deep Learning Based Forecasting-Aided State Estimation in Active Distribution Networks

Authors: Malek Alduhaymi, Ravindra Singh, Firdous Ul Nazir, Bikash C. Pal

Abstract: Operating an active distribution network (ADN) in the absence of enough measurements, the presence of distributed energy resources, and poor knowledge of responsive demand behaviour is a huge challenge. This paper introduces systematic modelling of demand response behaviour which is then included in Forecasting Aided State Estimation (FASE) for better control of the network. There are several inno… ▽ More Operating an active distribution network (ADN) in the absence of enough measurements, the presence of distributed energy resources, and poor knowledge of responsive demand behaviour is a huge challenge. This paper introduces systematic modelling of demand response behaviour which is then included in Forecasting Aided State Estimation (FASE) for better control of the network. There are several innovative elements in tuning parameters of FASE-based, demand profiling, and aggregation. The comprehensive case studies for three UK representative demand scenarios in 2023, 2035, and 2050 demonstrated the effectiveness of the proposed approach. △ Less

Submitted 20 October, 2023; originally announced October 2023.

A Model Predictive Approach for Enhancing Transient Stability of Grid-Forming Converters

Authors: Ali Arjomandi-Nezhad, Yifei Guo, Bikash C. Pal, Damiano Varagnolo

Abstract: A model predictive control (MPC) method for enhancing post-fault transient stability of a grid-forming (GFM) inverter based resources (IBRs) is developed in this paper. This proposed controller is activated as soon as the converter enters into the post-fault current-saturation mode. It aims at mitigating the instability arising from insufficient deceleration due to current saturation and thus impr… ▽ More A model predictive control (MPC) method for enhancing post-fault transient stability of a grid-forming (GFM) inverter based resources (IBRs) is developed in this paper. This proposed controller is activated as soon as the converter enters into the post-fault current-saturation mode. It aims at mitigating the instability arising from insufficient deceleration due to current saturation and thus improving the transient stability of a GFM-IBR. The MPC approach optimises the post-fault trajectory of GFM IBRs by introducing appropriate corrective phase angle jumps and active power references where the post-fault dynamics of GFM IBRs are addressed. These two signals provide controllability over GFM IBR's post-fault trajectory. This paper addresses the mitigation of oscillations between current-saturation mode and normal mode by forced saturation if conditions for remaining in the normal mode do not hold. The performance of the proposal is tested via dynamic simulations under various grid conditions and compared with other existing strategies. The results demonstrate significant improvement in transient stability. △ Less

Submitted 8 November, 2023; v1 submitted 2 August, 2023; originally announced August 2023.

Comments: 14 pages, 19 figures

Model-Free Optimal Control of Inverter for Dynamic Voltage Support

Authors: Yifei Guo, Bikash C. Pal, Rabih A. Jabr

Abstract: Inverter-based resources (IBRs) are required to provide dynamic voltage support (DVS) during voltage dips to enhance the low-voltage ride-through capability. In this paper, we develop a model-free control method to achieve the optimal DVS (ODVS) without relying on the knowledge of grid parameters. Delving into the optimum trajectory of the ODVS problem, it is found that either the current constrai… ▽ More Inverter-based resources (IBRs) are required to provide dynamic voltage support (DVS) during voltage dips to enhance the low-voltage ride-through capability. In this paper, we develop a model-free control method to achieve the optimal DVS (ODVS) without relying on the knowledge of grid parameters. Delving into the optimum trajectory of the ODVS problem, it is found that either the current constraint and the maximum active power constraint of IBRs are binding or one of the constraints is binding. This inspires us to search for the optimum in a closed-loop way by a perturb-and-observe (P&O)-based optimum seeking (OS) controller with either the power factor angle or the reactive current being the manipulated (perturbed) variable. The system is guaranteed to converge asymptotically to the optimum provided the stepsize sequence is diminishing and non-summable. The proposed model-free optimal control is finally implemented within a single-stage photovoltaic (PV) system, where dynamic simulations demonstrate the optimal and fast DVS performance △ Less

Submitted 20 June, 2022; originally announced June 2022.

On the Optimality of Voltage Unbalance Attenuation by Inverters

Authors: Yifei Guo, Bikash C. Pal, Rabih A. Jabr

Abstract: In this paper, we investigate the control of inverter-based resources (IBRs) for optimal voltage unbalance attenuation (OVUA). This problem is formulated as an optimization program under a tailored dq-frame, which minimizes the negative-sequence voltage at the point of common coupling (PCC) subject to the current, active power, synchronization stability, and feasibility constraints. The program is… ▽ More In this paper, we investigate the control of inverter-based resources (IBRs) for optimal voltage unbalance attenuation (OVUA). This problem is formulated as an optimization program under a tailored dq-frame, which minimizes the negative-sequence voltage at the point of common coupling (PCC) subject to the current, active power, synchronization stability, and feasibility constraints. The program is inherently nonconvex and intractable. So, to guarantee the optimality, a rigorous optimality analysis is performed by leveraging analytical optimization. The analysis is divided into two cases: full mitigation of VU and partial attenuation of VU. For the former case, we analytically solve the original program since the resultant VU is immediately deducible. For the latter one, directly solving the problem becomes very hard. Thus, we reformulate the program into an equivalent but more tractable form under certain conditions, by which the analytical optimum can be finally derived. It is found that the optimum trajectory has three stages (O1-O3), depending on two critical boundary conditions (C1 and C2). Finally, we implement the optimum with a photovoltaic (PV)-storage system by develo** an OVUA controller. The proposed approach is demonstrated by dynamic simulations under different VU conditions and is compared with several existing practices. △ Less

Submitted 22 September, 2021; originally announced September 2021.

Global Optimality of Inverter Dynamic Voltage Support

Authors: Yifei Guo, Bikash C. Pal, Rabih A. Jabr

Abstract: This paper investigates the dynamic voltage support (DVS) control of inverter-based resources (IBRs) under voltage sags to enhance the low-voltage ride-through performance. We first revisit the prevalent droop control from an optimization perspective to elaborate on why it usually suffers from suboptimality. Then, we formulate the DVS problem as an optimization program that maximizes the positive-… ▽ More This paper investigates the dynamic voltage support (DVS) control of inverter-based resources (IBRs) under voltage sags to enhance the low-voltage ride-through performance. We first revisit the prevalent droop control from an optimization perspective to elaborate on why it usually suffers from suboptimality. Then, we formulate the DVS problem as an optimization program that maximizes the positive-sequence voltage magnitude at the point of common coupling (PCC) subject to the current, active power, and stability constraints. The program is inherently nonconvex due to the active power limits, of which the global optimality is not guaranteed by off-the-shelf solvers. In this context, we perform the optimality analysis to explore the global optimum analytically. It is found that the unique global optimum has three scenarios/stages (S1--S3), which depends on the specific relationship among grid voltage, grid strength, as well as physical limits of IBRs. The closed-form solutions in S1 and S3 are derived and the optimality conditions for S2 are provided, which guarantees the optimality and compatibility with the fast real-time control. We implement the optimum with a grid-connected photovoltaic (PV) power plant by integrating a DVS controller. Dynamic simulations are carried out under different scenarios to test our proposal and compare it with other existing methods. Additionally, the robustness of optimality against model errors is discussed and numerically demonstrated. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Comments: 15 pages

Dynamic State Estimation for Power System Control and Protection

Authors: Yu Liu, Abhinav Kumar Singh, Junbo Zhao, A. P. Meliopoulos, Bikash Pal, M. A. M. Ariff, Thierry Van Cutsem, Mevludin Glavic, Zhenyu Huang, Innocent Kamwa, Lamine Mili, Saleem Mir, Ahmad Taha, Vladimir Terzija, Shenglong Yu

Abstract: Dynamic state estimation (DSE) accurately tracks the dynamics of a power system and provides the evolution of the system state in real-time. This paper focuses on the control and protection applications of DSE, comprehensively presenting different facets of control and protection challenges arising in modern power systems. It is demonstrated how these challenges are effectively addressed with DSE-… ▽ More Dynamic state estimation (DSE) accurately tracks the dynamics of a power system and provides the evolution of the system state in real-time. This paper focuses on the control and protection applications of DSE, comprehensively presenting different facets of control and protection challenges arising in modern power systems. It is demonstrated how these challenges are effectively addressed with DSE-enabled solutions. As precursors to these solutions, reformulation of DSE considering both synchrophasor and sampled value measurements and comprehensive comparisons of DSE and observers have been presented. The usefulness and necessity of DSE based solutions in ensuring system stability, reliable protection and security, and resilience by revam** of control and protection methods are shown through examples, practical applications, and suggestions for further development. △ Less

Submitted 29 December, 2020; originally announced December 2020.

Comments: 10 pages, 10 figures, submitted to IEEE Transactions on Power Systems

Roles of Dynamic State Estimation in Power System Modeling, Monitoring and Operation

Authors: Junbo Zhao, Marcos Netto, Zhenyu Huang, Samson Shenglong Yu, Antonio Gomez-Exposito, Shaobu Wang, Innocent Kamwa, Shahrokh Akhlaghi, Lamine Mili, Vladimir Terzija, A. P. Sakis Meliopoulos, Bikash Pal, Abhinav Kumar Singh, Ali Abur, Tianshu Bi, Alireza Rouhani

Abstract: Power system dynamic state estimation (DSE) remains an active research area. This is driven by the absence of accurate models, the increasing availability of fast-sampled, time-synchronized measurements, and the advances in the capability, scalability, and affordability of computing and communications. This paper discusses the advantages of DSE as compared to static state estimation, and the imple… ▽ More Power system dynamic state estimation (DSE) remains an active research area. This is driven by the absence of accurate models, the increasing availability of fast-sampled, time-synchronized measurements, and the advances in the capability, scalability, and affordability of computing and communications. This paper discusses the advantages of DSE as compared to static state estimation, and the implementation differences between the two, including the measurement configuration, modeling framework and support software features. The important roles of DSE are discussed from modeling, monitoring and operation aspects for today's synchronous machine dominated systems and the future power electronics-interfaced generation systems. Several examples are presented to demonstrate the benefits of DSE on enhancing the operational robustness and resilience of 21st century power system through time critical applications. Future research directions are identified and discussed, paving the way for develo** the next generation of energy management systems. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 9 pages, 6 figures

Real-Time Equality-Constrained Hybrid State Estimation in Complex Variables

Authors: Izudin Dzafic, Rabih A. Jabr, Bikash C. Pal

Abstract: The hybrid power system state estimation problem requires computing the state of the power network using data from both legacy and phasor measurements. Recent research has shown that the normal equations approach in complex variables is computationally advantageous, particularly in the presence of phasor measurement values, and that its software implementation is best suited to modern processors t… ▽ More The hybrid power system state estimation problem requires computing the state of the power network using data from both legacy and phasor measurements. Recent research has shown that the normal equations approach in complex variables is computationally advantageous, particularly in the presence of phasor measurement values, and that its software implementation is best suited to modern processors that employ single instruction multiple data (SIMD) processor extensions. The complex normal equations approach is however not ideal for handling zero injection measurements, as it requires their modeling as pseudo-measurements with high weights. This paper employs Wirtinger calculus for extending the complex normal equations approach to include equality constraints, and contrasts it with two previously published implementations: the normal equations approach in complex variables and the hybrid equality constrained state estimator in real variables. Numerical results are reported on transmission networks having up to 9241 nodes; they show that the complex variable equality constrained hybrid state estimator exhibits superior performance as compared to the above two techniques in terms of both computational time and accuracy. Moreover, the execution time on the largest network is less than 300 ms, which makes the proposed implementation commensurate with the requirements of real-time applications. △ Less

Submitted 9 June, 2018; originally announced June 2018.

Comments: 7 pages