-
Waveform Learning under Phase Noise Impairment for Sub-THz Communications
Authors:
Dileepa Marasinghe,
Le Hang Nguyen,
Jafar Mohammadi,
Yejian Chen,
Thorsten Wild,
Nandana Rajatheva
Abstract:
The large untapped spectrum in sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. Phase noise (PN) is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the modest output power of the power amplifier demands limits on peak to average power ratio (PAPR) signal design. In this work, w…
▽ More
The large untapped spectrum in sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. Phase noise (PN) is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the modest output power of the power amplifier demands limits on peak to average power ratio (PAPR) signal design. In this work, we design a PN-robust, low PAPR single-carrier (SC) waveform by geometrically sha** the constellation and adapting the pulse sha** filter pair under practical PN modeling and adjacent channel leakage ratio (ACLR) constraints for a given excess bandwidth. We optimize the waveforms under conventional and state-of-the-art PN-aware demappers. Moreover, we introduce a neural-network (NN) demapper enhancing transceiver adaptability. We formulate the waveform optimization problem in its augmented Lagrangian form and use a back-propagation-inspired technique to obtain a design that is numerically robust to PN, while adhering to PAPR and ACLR constraints. The results substantiate the efficacy of the method, yielding up to 2.5 dB in the required Eb/N0 under stronger PN along with a PAPR reduction of 0.5 dB. Moreover, PAPR reductions up to 1.2 dB are possible with competitive BLER and SE performance in both low and high PN conditions.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Complex-Valued Kernel-based Phase and Amplitude Distortion Compensation in Parametrically Amplified Optical Links
Authors:
Long Hoang Nguyen,
Sonia Boscolo,
Stylianos Sygletos
Abstract:
We develop a complex-valued kernel-adaptive-filtering based method for phase and amplitude distortion compensation in cascaded fibre-optical parametric amplifier (FOPA) links. Our algorithm predicts and cancels both distortions induced by pump-phase modulation across all amplification stages, achieving more than an order of magnitude improvement in BER.
We develop a complex-valued kernel-adaptive-filtering based method for phase and amplitude distortion compensation in cascaded fibre-optical parametric amplifier (FOPA) links. Our algorithm predicts and cancels both distortions induced by pump-phase modulation across all amplification stages, achieving more than an order of magnitude improvement in BER.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Physics-informed Graphical Neural Network for Power System State Estimation
Authors:
Quang-Ha Ngo,
Bang L. H. Nguyen,
Tuyen V. Vu,
Jianhua Zhang,
Tuan Ngo
Abstract:
State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. This paper proposes a physics-informed graphical learning s…
▽ More
State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. This paper proposes a physics-informed graphical learning state estimation method to address these limitations by leveraging both domain physical knowledge and a graph neural network (GNN). We employ a GNN architecture that can handle the graph-structured data of power systems more effectively than traditional data-driven methods. The physics-based knowledge is constructed from the branch current formulation, making the approach adaptable to both transmission and distribution systems. The validation results of three IEEE test systems show that the proposed method can achieve lower mean square error more than 20% than the conventional methods.
△ Less
Submitted 29 December, 2023;
originally announced December 2023.
-
Constellation Sha** under Phase Noise Impairment for Sub-THz Communications
Authors:
Dileepa Marasinghe,
Le Hang Nguyen,
Jafar Mohammadi,
Yejian Chen,
Thorsten Wild,
Nandana Rajatheva
Abstract:
The large untapped spectrum in the sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. One of the challenges in radio communications in sub-THz is the hardware impairments. Specifically, phase noise is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the moderate output power of th…
▽ More
The large untapped spectrum in the sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. One of the challenges in radio communications in sub-THz is the hardware impairments. Specifically, phase noise is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the moderate output power of the sub-THz power amplifier demands limits on peak to average power ratio (PAPR) signal design. Single carrier frequency domain equalization (SC-FDE) has been identified as a suitable candidate for sub-THz, although some challenges such as phase noise and PAPR still remain to be tackled. In this work, we design a phase noise robust, modest PAPR SC waveform by geometrically sha** the constellation under practical conditions. We formulate the waveform optimization problem in its augmented Lagrangian form and use a back-propagation-inspired technique to obtain a constellation design that is numerically robust to phase noise, while maintaining a relatively low PAPR compared to the conventional waveforms.
△ Less
Submitted 21 March, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Waveforms for sub-THz 6G: Design Guidelines
Authors:
Muris Sarajlić,
Nuutti Tervo,
Aarno Pärssinen,
Le Hang Nguyen,
Hardy Halbauer,
Kilian Roth,
Vaidyanathan Kumar,
Tommy Svensson,
Ahmad Nimr,
Stephan Zeitz,
Meik Dör**haus,
Gerhard Fettweis
Abstract:
The projected sub-THz (100 - 300 GHz) part of the upcoming 6G standard will require a careful design of the waveform and choice of slot structure. Not only that the design of the physical layer for 6G will be driven by ambitious system performance requirements, but also hardware limitations, specific to sub-THz frequencies, pose a fundamental design constraint for the waveform. In this contributio…
▽ More
The projected sub-THz (100 - 300 GHz) part of the upcoming 6G standard will require a careful design of the waveform and choice of slot structure. Not only that the design of the physical layer for 6G will be driven by ambitious system performance requirements, but also hardware limitations, specific to sub-THz frequencies, pose a fundamental design constraint for the waveform. In this contribution, general guidelines for the waveform design are given, together with a non-exhaustive list of exemplary waveforms that can be used to meet the design requirements.
△ Less
Submitted 17 July, 2023; v1 submitted 15 June, 2023;
originally announced June 2023.
-
1-D Convolutional Graph Convolutional Networks for Fault Detection in Distributed Energy Systems
Authors:
Bang L. H. Nguyen,
Tuyen Vu,
Thai-Thanh Nguyen,
Mayank Panwar,
Rob Hovsapian
Abstract:
This paper presents a 1-D convolutional graph neural network for fault detection in microgrids. The combination of 1-D convolutional neural networks (1D-CNN) and graph convolutional networks (GCN) helps extract both spatial-temporal correlations from the voltage measurements in microgrids. The fault detection scheme includes fault event detection, fault type and phase classification, and fault loc…
▽ More
This paper presents a 1-D convolutional graph neural network for fault detection in microgrids. The combination of 1-D convolutional neural networks (1D-CNN) and graph convolutional networks (GCN) helps extract both spatial-temporal correlations from the voltage measurements in microgrids. The fault detection scheme includes fault event detection, fault type and phase classification, and fault location. There are five neural network model training to handle these tasks. Transfer learning and fine-tuning are applied to reduce training efforts. The combined recurrent graph convolutional neural networks (1D-CGCN) is compared with the traditional ANN structure on the Potsdam 13-bus microgrid dataset. The achievable accuracy of 99.27%, 98.1%, 98.75%, and 95.6% for fault detection, fault type classification, fault phase identification, and fault location respectively.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Hierarchical Control of Grid-Connected Hydrogen Electrolyzer Providing Grid Services
Authors:
Bang L. H. Nguyen,
Mayank Panwar,
Rob Hovsapian,
Yashodhan Agalgaokar,
Tuyen Vu
Abstract:
This paper presents the operation modes and control architecture of the grid-connected hydrogen electrolyzer systems for the provision of frequency and voltage supports. The analysis is focused on the primary and secondary loops in the hierarchical control scheme. At the power converter inner control loop, the voltage- and current-control modes are analyzed. At the primary level, the droop and opp…
▽ More
This paper presents the operation modes and control architecture of the grid-connected hydrogen electrolyzer systems for the provision of frequency and voltage supports. The analysis is focused on the primary and secondary loops in the hierarchical control scheme. At the power converter inner control loop, the voltage- and current-control modes are analyzed. At the primary level, the droop and opposite droop control strategies to provide voltage and frequency support are described. Coordination between primary control and secondary, tertiary reserves is discussed. The case studies and real-time simulation results are provided using Typhoon HIL to back the theoretical investigation.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Power Converter Topologies for Electrolyzer Applications to Enable Electric Grid Services
Authors:
Bang L. H. Nguyen,
Mayank Panwar,
Rob Hovsapian,
Kazunori Nagasawa,
Tuyen V. Vu
Abstract:
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyz…
▽ More
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyzer via the power electronics system interface between the utility grid and electrolyzer. This paper discusses power converter topologies and the control scheme of this power electronics interface for electrolyzer applications to enable electricity grid services. For the sake of unity, in this paper, we consider the power converter system interfacing the utility grid at the line-to-line root mean square RMS value of 480 VAC 60 Hz and supplying to the 3500 A 750 kW PEM electrolyzer stack.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Advanced Load Shedding for Integrated Power and Energy Systems
Authors:
Bang L. H. Nguyen,
Tuyen Vu,
Colin Ogilvie,
Harsha Ravindra,
Mark Stanovich,
Karl Schoder,
Michael Steurer,
Charalambos Konstantinou,
Herbert Ginn,
Christian Schegan
Abstract:
This paper introduces an advanced load shedding algorithm to improve the operability performance of a medium voltage direct current (MVDC) integrated shipboard power and energy system. Outcomes are compared to a baseline algorithm while considering power generation contingency scenarios. The case study is conducted with a real-time, embedded algorithm implementation using a control hardware-in-the…
▽ More
This paper introduces an advanced load shedding algorithm to improve the operability performance of a medium voltage direct current (MVDC) integrated shipboard power and energy system. Outcomes are compared to a baseline algorithm while considering power generation contingency scenarios. The case study is conducted with a real-time, embedded algorithm implementation using a control hardware-in-the-loop (CHIL) setup.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Distributed Dynamic State Estimation for Microgrids
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Thomas H. Ortmeyer,
Tuan Ngo
Abstract:
Conventionally, the dynamic state estimation of variables in power networks is performed based on the forecasting-aided model of bus voltages. This approach is effective in the stiff grids at the transmission level, where the bus voltages are less sensitive to variations of the load. However, in microgrids, bus voltages can fluctuate significantly under load changes, the forecasting-aided model ma…
▽ More
Conventionally, the dynamic state estimation of variables in power networks is performed based on the forecasting-aided model of bus voltages. This approach is effective in the stiff grids at the transmission level, where the bus voltages are less sensitive to variations of the load. However, in microgrids, bus voltages can fluctuate significantly under load changes, the forecasting-aided model may not sufficiently accurate. To resolve this problem, this paper proposes a dynamic state estimation scheme for microgrids using the state-space model derived from differential equations of power networks. In the proposed scheme, the branch currents are the state variables, whereas the bus voltages become the inputs which can vary freely with loads. As a result, the entire microgrids system can be partitioned into local areas, where neighbor areas share the common inputs. The proposed estimation scheme then can be implemented in a distributed manner. A novel Kalman-based filtering method is derived to estimate both states and inputs simultaneously. Only information of common inputs is exchanged between neighboring estimators. Simulation results of the 13-bus Potsdam microgrid (New York State) are provided to prove the feasibility and performances of the proposed scheme.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Fruit-CoV: An Efficient Vision-based Framework for Speedy Detection and Diagnosis of SARS-CoV-2 Infections Through Recorded Cough Sounds
Authors:
Long H. Nguyen,
Nhat Truong Pham,
Van Huong Do,
Liu Tai Nguyen,
Thanh Tin Nguyen,
Van Dung Do,
Hai Nguyen,
Ngoc Duy Nguyen
Abstract:
SARS-CoV-2 is colloquially known as COVID-19 that had an initial outbreak in December 2019. The deadly virus has spread across the world, taking part in the global pandemic disease since March 2020. In addition, a recent variant of SARS-CoV-2 named Delta is intractably contagious and responsible for more than four million deaths over the world. Therefore, it is vital to possess a self-testing serv…
▽ More
SARS-CoV-2 is colloquially known as COVID-19 that had an initial outbreak in December 2019. The deadly virus has spread across the world, taking part in the global pandemic disease since March 2020. In addition, a recent variant of SARS-CoV-2 named Delta is intractably contagious and responsible for more than four million deaths over the world. Therefore, it is vital to possess a self-testing service of SARS-CoV-2 at home. In this study, we introduce Fruit-CoV, a two-stage vision framework, which is capable of detecting SARS-CoV-2 infections through recorded cough sounds. Specifically, we convert sounds into Log-Mel Spectrograms and use the EfficientNet-V2 network to extract its visual features in the first stage. In the second stage, we use 14 convolutional layers extracted from the large-scale Pretrained Audio Neural Networks for audio pattern recognition (PANNs) and the Wavegram-Log-Mel-CNN to aggregate feature representations of the Log-Mel Spectrograms. Finally, we use the combined features to train a binary classifier. In this study, we use a dataset provided by the AICovidVN 115M Challenge, which includes a total of 7371 recorded cough sounds collected throughout Vietnam, India, and Switzerland. Experimental results show that our proposed model achieves an AUC score of 92.8% and ranks the 1st place on the leaderboard of the AICovidVN Challenge. More importantly, our proposed framework can be integrated into a call center or a VoIP system to speed up detecting SARS-CoV-2 infections through online/recorded cough sounds.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Distributed Dynamic State-Input Estimation for Power Networks of Microgrids and Active Distribution Systems with Unknown Inputs
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Joseph M. Guerrero,
Mischael Steurer,
Karl Schoder,
Tuan Ngo
Abstract:
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of micro…
▽ More
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of microgrids and active distribution networks, this approach may become ineffective as the forecasting accuracy is not guaranteed. To overcome such drawbacks, this paper employs the power networks model derived from the physical equations of branch currents. Specifically, the power network model is a linear state-space model, in which the state vector consists of branch currents, and the input vector consists of bus voltages. To estimate both state and input variables, we propose linear Kalman-based dynamic filtering algorithms in batch-mode regression form, considering the cross-correlation between states and inputs. For the scalability of the proposed scheme, the distributed implementation is also presented. Complementarily, the predicted state and input vectors are leveraged for bad data detection. Results carried out on a 13-bus microgrid system in real-time Opal-RT platform demonstrate the effectiveness of the proposed method in comparison with the traditional weighted least square and tracking state estimation methods.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
Joint RFI Mitigation and Radar Echo Recovery for One-Bit UWB Radar
Authors:
Tianyi Zhang,
Jiaying Ren,
Jian Li,
Lam H. Nguyen,
Petre Stoica
Abstract:
Radio frequency interference (RFI) mitigation and radar echo recovery are critically important for the proper functioning of ultra-wideband (UWB) radar systems using one-bit sampling techniques. We recently introduced a technique for one-bit UWB radar, which first uses a majorization-minimization method for RFI parameter estimation followed by a sparse method for radar echo recovery. However, this…
▽ More
Radio frequency interference (RFI) mitigation and radar echo recovery are critically important for the proper functioning of ultra-wideband (UWB) radar systems using one-bit sampling techniques. We recently introduced a technique for one-bit UWB radar, which first uses a majorization-minimization method for RFI parameter estimation followed by a sparse method for radar echo recovery. However, this technique suffers from high computational complexity due to the need to estimate the parameters of each RFI source separately and iteratively. In this paper, we present a computationally efficient joint RFI mitigation and radar echo recovery framework to greatly reduce the computational cost. Specifically, we exploit the sparsity of RFI in the fast-frequency domain and the sparsity of radar echoes in the fast-time domain to design a one-bit weighted SPICE (SParse Iterative Covariance-based Estimation) based framework for the joint RFI mitigation and radar echo recovery of one-bit UWB radar. Both simulated and experimental results are presented to show that the proposed one-bit weighted SPICE framework can not only reduce the computational cost but also outperform the existing approach for decoupled RFI mitigation and radar echo recovery of one-bit UWB radar.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
-
RFI Mitigation for One-bit UWB Radar Systems
Authors:
Tianyi Zhang,
Jiaying Ren,
Jian Li,
Lam H. Nguyen,
Petre Stoica
Abstract:
Radio frequency interference (RFI) mitigation is critical to the proper operation of ultra-wideband (UWB) radar systems since RFI can severely degrade the radar imaging capability and target detection performance. In this paper, we address the RFI mitigation problem for one-bit UWB radar systems. A one-bit UWB system obtains its signed measurements via a low-cost and high rate sampling scheme, ref…
▽ More
Radio frequency interference (RFI) mitigation is critical to the proper operation of ultra-wideband (UWB) radar systems since RFI can severely degrade the radar imaging capability and target detection performance. In this paper, we address the RFI mitigation problem for one-bit UWB radar systems. A one-bit UWB system obtains its signed measurements via a low-cost and high rate sampling scheme, referred to as the Continuous Time Binary Value (CTBV) technology. This sampling strategy compares the signal to a known threshold varying with slow-time and therefore can be used to achieve a rather high sampling rate and quantization resolution with rather simple and affordable hardware. This paper establishes a proper data model for the RFI sources and proposes a novel RFI mitigation method for the one-bit UWB radar system that uses the CTBV sampling technique. Specifically, we first model the RFI sources as a sum of sinusoids with frequencies fixed during the coherent processing interval (CPI) and we exploit the sparsity of the RFI spectrum. We extend a majorization-minimization based 1bRELAX algorithm, referred to as 1bMMRELAX, to estimate the RFI source parameters from the signed measurements obtained by using the CTBV sampling strategy. We also devise a new fast frequency initialization method based on the Alternating Direction Method of Multipliers (ADMM) methodology for the extended 1bMMRELAX algorithm to significantly improve its computational efficiency. Moreover, an ADMM-based sparse method is introduced to recover the desired radar echoes using the estimated RFI parameters. Both simulated and experimental results are presented to demonstrate that our proposed algorithm outperforms the existing digital integration method, especially for severe RFI cases.
△ Less
Submitted 25 March, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Large-Scale Parameters of Spatio-Temporal Short-Range Indoor Backhaul Channels at 140 GHz
Authors:
Sinh L. H. Nguyen,
Katsuyuki Haneda,
Jan Järveläineny,
Aki Karttuneny,
Jyri Putkonen
Abstract:
The use of above-100 GHz radio frequencies would be one of promising approaches to enhance the fifth-generation cellular further. Any air interface and cellular network designs require channel models, for which measured evidence of largescale parameters such as pathloss, delay and angular spreads, is crucial. This paper provides the evidence from quasi-static spatiotemporal channel sounding campai…
▽ More
The use of above-100 GHz radio frequencies would be one of promising approaches to enhance the fifth-generation cellular further. Any air interface and cellular network designs require channel models, for which measured evidence of largescale parameters such as pathloss, delay and angular spreads, is crucial. This paper provides the evidence from quasi-static spatiotemporal channel sounding campaigns at two indoor hotspot (InH) scenarios at 140 GHz band, assuming short-range backhaul connectivity. The measured two InH sites are shop** mall and airport check-in hall. Our estimated omni-directional large-scale parameters from the measurements are found in good match with those of the Third Generation Partnership Project (3GPP) for new radios (NR) channel model in InH scenario, despite the difference of assumed link types and radio frequency range. The 3GPP NR channel model is meant for access links and said to be valid up to 100 GHz, while our measurements cover shortrange backhaul scenarios at 140 GHz. We found more deviation between our estimated large-scale parameters and those of the 3GPP NR channel model in the airport than in the shop** mall.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Decentralized Dynamic State Estimation in Microgrids
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Tuan A. Ngo
Abstract:
This paper proposes a decentralized dynamic state estimation scheme for microgrids. The approach employs the voltage and current measurements in the dq0 reference frame through phasor synchronization to be able to exclude orthogonal functions from their relationship formulas. Based on that premise, we utilize a Kalman filter to dynamically estimate states of microgrids. The decoupling of measureme…
▽ More
This paper proposes a decentralized dynamic state estimation scheme for microgrids. The approach employs the voltage and current measurements in the dq0 reference frame through phasor synchronization to be able to exclude orthogonal functions from their relationship formulas. Based on that premise, we utilize a Kalman filter to dynamically estimate states of microgrids. The decoupling of measurement values to state and input vectors reduces the computational complexity. The Kalman filter considers the process noise covariances, which are modified with respect to the covariance of measured input values. Theoretical analysis and simulation results are provided for validation.
△ Less
Submitted 6 July, 2019;
originally announced July 2019.
-
Modeling the Multipath Cross-Polarization Ratio for Above-6 GHz Radio Links
Authors:
Aki Karttunen,
Jan Järveläinen,
Sinh Le Hong Nguyen,
Katsuyuki Haneda
Abstract:
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover…
▽ More
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover overestimates the depolarization effect. Our measurements revealed a clear trend that the MPC XPR is inversely proportional to an excess loss in reference to the free-space path loss. The model is physically sound as a higher excess loss is attributed to more lossy interactions or to a greater number of interactions with objects, leading to a greater chance of depolarization. The measurements furthermore showed that the MPC XPR is not strongly frequency or environment dependent. In our MPC XPR model, an MPC with zero-dB excess loss has a mean XPR of 28 dB. The mean XPR decreases half-a-dB as the excess loss increases by every dB and the standard deviation around the mean is 6 dB. The model is applicable to existing channel models to reproduce realistic MPC XPRs for the above 6-GHz radio links.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Comparing Radio Propagation Channels Between 28 and 140 GHz Bands in a Shop** Mall
Authors:
Sinh Le Hong Nguyen,
Jan Jarvelainen,
Aki Karttunen,
Katsuyuki Haneda,
Jyri Putkonen
Abstract:
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal t…
▽ More
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal that there is high spatial-temporal correlation between 28 and 140 GHz channels, similar numbers of strong multipath components, and only small variations in the large-scale parameters between the two bands. Furthermore, when including the weak paths there are higher total numbers of clusters and paths in 28 GHz as compared to those in 140 GHz bands. With these similarities, it would be very interesting to investigate the potentials of using 140 GHz band in the future mobile radio communications.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.